Skip to Content
Last modified by Kilight Cao on 2025/07/23 16:27
From version 102.2
edited by Xiaoling
on 2023/09/07 16:14
Change comment: There is no comment for this version
To version 53.9
edited by Xiaoling
on 2023/08/02 11:57
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 -(% class="wikigeneratedid" id="HTableofContents:" %)
1 +(% class="wikigeneratedid" %)
2 2  **Table of Contents:**
3 3  
4 4  {{toc/}}
... ... @@ -5,9 +5,6 @@
5 5  
6 6  
7 7  
8 -
9 -
10 -
11 11  = 1. The use of this guideline =
12 12  
13 13  
... ... @@ -14,30 +14,17 @@
14 14  This configure instruction is for Dragino NB-IoT models with -NB or -NS suffix, for example DDS75-NB. These models use the same NB-IoT Module **[[BC660K-GL>>https://www.quectel.com/product/lpwa-bc660k-gl-nb2]]** and has the same software structure. The have the same configure instruction to different IoT servers. Use can follow the instruction here to see how to configure to connect to those servers.
15 15  
16 16  
17 -= 2. Attach Network =
14 += 2. Network Connection =
18 18  
19 19  
20 -To attache NB-IoT sensors to NB-IoT Network, You need to:
21 -
22 -1. Get a NB-IoT SIM card from Service Provider. (Not the same as the SIM card we use in mobile phone)
23 -1. Insert the SIM card to Sensor
24 -1. [[Configure APN>>http://wiki.dragino.com/xwiki/bin/view/Main/How%20to%20configure%20APN%20in%20the%20node/]] in the sensor (AT+APN=<APN>)
25 -
26 -[[image:image-20230808205045-1.png||height="293" width="438"]]
27 -
28 -After doing above, the NB-IoT Sensors should be able to attach to NB-IoT network .
29 -
30 30  The -NB and -NS models support (% style="color:blue" %)**LTE Cat NB2**(%%), with below frequency band: multiple frequency bands of (% style="color:blue" %)**B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85**(%%) . Make sure you use a the NB-IoT SIM card.
31 31  
32 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:878px" %)
33 -|(% style="background-color:#4f81bd; color:white; width:117px" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white; width:151px" %)**AT+APN=**|(% style="background-color:#4f81bd; color:white; width:474px" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Comments**
34 -|(% style="width:117px" %)**[[1NCE>>https://1nce.com]]**|(% style="width:151px" %)iot.1nce.net|(% style="width:474px" %)(((
35 -**[[Coverage Reference Link>>https://1nce.com/en-ap/1nce-connect]]**
19 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:510px" %)
20 +|(% style="background-color:#4f81bd; color:white" %)**SIM Provider**|(% style="background-color:#4f81bd; color:white" %)**APN**|(% style="background-color:#4f81bd; color:white" %)**NB-IoT Coverage**|(% style="background-color:#4f81bd; color:white" %)**Comments**
21 +|1NCE| | |
22 +|China Mobile| | |
36 36  
37 -Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Finland, Germany, Great Britain, Greece, Hungary, Ireland, Italy, Latvia, Malta, Netherlands, Norway, Puerto Rico, Russia, Slovak , Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan, USA, US Virgin Islands
38 -)))|(% style="width:135px" %)
39 -|(% style="width:117px" %)China Mobile|(% style="width:151px" %)No need configure|(% style="width:474px" %)China Mainland, HongKong|(% style="width:135px" %)
40 -|(% style="width:117px" %)China Telecom|(% style="width:151px" %)ctnb|(% style="width:474px" %)China Mainland|(% style="width:135px" %)
24 +== 2.1 1NCE SIM Card. ==
41 41  
42 42  
43 43  
... ... @@ -104,7 +104,7 @@
104 104  
105 105  [[image:image-20230802112413-4.png]]
106 106  
107 -[[image:image-20230802112413-5.png||height="530" width="987"]]
91 +[[image:image-20230802112413-5.png]]
108 108  
109 109  (% style="color:red" %)**Notice: MQTT protocol has a much higher power consumption compare with UDP/CoAP protocol. Please check the power analyze document and adjust the uplink  period to a suitable interval.**
110 110  
... ... @@ -116,14 +116,14 @@
116 116  
117 117  [[ThingSpeak>>url:https://thingspeak.com/]] connection uses MQTT Connection. So we need to get MQTT Credentials first. You need to point MQTT Devices to ThingSpeak Channel as well.
118 118  
119 -[[image:image-20230802112413-6.png||height="336" width="925"]]
103 +[[image:image-20230802112413-6.png]]
120 120  
121 121  [[image:image-20230802112413-7.png]]
122 122  
123 123  
124 -=== 3.3.2 Simulate with MQTT.fx ===
108 +== 3.3.2 Simulate with MQTT.fx ==
125 125  
126 -==== 3.3.2.1 Establish MQTT Connection ====
110 +=== 3.3.2.1 Establish MQTT Connection ===
127 127  
128 128  
129 129  After we got MQTT Credentials, we can first simulate with PC tool MQTT.fx tool to see if the Credentials and settings are fine.
... ... @@ -133,62 +133,51 @@
133 133  * (% style="color:#037691" %)**Broker Address:**(%%) mqtt3.thingspeak.com
134 134  
135 135  * (% style="color:#037691" %)**Broker Port:**(%%) 1883
136 -
137 137  * (% style="color:#037691" %)**Client ID:**(%%) <Your ThingSpeak MQTT ClientID>
138 -
139 139  * (% style="color:#037691" %)**User Name:**(%%) <Your ThingSpeak MQTT User Name>
140 -
141 141  * (% style="color:#037691" %)**Password:**(%%) <Your ThingSpeak MQTT Password>
142 142  
124 +=== 3.3.2.2 Publish Data to ThingSpeak Channel ===
143 143  
144 -
145 -==== 3.3.2.2 Publish Data to ThingSpeak Channel ====
146 -
147 -
148 148  [[image:image-20230802112413-9.png]]
149 149  
150 150  [[image:image-20230802112413-10.png]]
151 151  
130 +In MQTT.fx, we can publish below info:
152 152  
153 -(% style="color:blue" %)**In MQTT.fx, we can publish below info:**
132 +* Topic: channels/YOUR_CHANNEL_ID/publish
133 +* Payload: field1=63&field2=67&status=MQTTPUBLISH
154 154  
155 -* (% style="color:#037691" %)**Topic:**(%%) channels/YOUR_CHANNEL_ID/publish
156 -
157 -* (% style="color:#037691" %)**Payload:**(%%) field1=63&field2=67&status=MQTTPUBLISH
158 -
159 159  Where 63 and 67 are the value to be published to field1 & field2.
160 160  
161 161  
162 -(% style="color:blue" %)**Result: **
138 +Result:
163 163  
164 -[[image:image-20230802112413-11.png||height="539" width="901"]]
140 +[[image:image-20230802112413-11.png]]
165 165  
166 166  
167 -=== 3.3.3 Configure NB-IoT Sensor for connection ===
143 +== 1.3 Configure NB-IoT Sensor for connection ==
168 168  
169 -==== 3.3.3.1 AT Commands: ====
145 +=== 1.3.1 AT Commands: ===
170 170  
171 -
172 172  In the NB-IoT, we can run below commands so to publish the channels like MQTT.fx
173 173  
174 -* (% style="color:blue" %)**AT+PRO=3,1** (%%) ~/~/ Set to use ThingSpeak Server and Related Payload
149 +* AT+PRO=3,1   ~/~/Set to use ThingSpeak Server and Related Payload
175 175  
176 -* (% style="color:blue" %)**AT+CLIENT=<Your ThingSpeak MQTT ClientID>**
151 +* AT+CLIENT=<Your ThingSpeak MQTT ClientID>
177 177  
178 -* (% style="color:blue" %)**AT+UNAME=<Your ThingSpeak MQTT User Name>**
153 +* AT+UNAME=<Your ThingSpeak MQTT User Name>
179 179  
180 -* (% style="color:blue" %)**AT+PWD=<Your ThingSpeak MQTT Password>**
155 +* AT+PWD=<Your ThingSpeak MQTT Password>
181 181  
182 -* (% style="color:blue" %)**AT+PUBTOPIC=<YOUR_CHANNEL_ID>**
157 +* AT+PUBTOPIC=<YOUR_CHANNEL_ID>
183 183  
184 -* (% style="color:blue" %)**AT+SUBTOPIC=<YOUR_CHANNEL_ID>**
159 +* AT+SUBTOPIC=<YOUR_CHANNEL_ID>
185 185  
161 +=== 1.3.2 Uplink Examples ===
186 186  
163 +For S31-NB
187 187  
188 -==== 3.3.3.2 Uplink Examples ====
189 -
190 -[[image:image-20230816201942-1.png]]
191 -
192 192  For SE01-NB
193 193  
194 194  For DDS20-NB
... ... @@ -212,240 +212,325 @@
212 212  For SN50V3-NB
213 213  
214 214  
215 -==== 3.3.3.3 Map fields to sensor value ====
188 +=== 1.3.2 Map fields to sensor value ===
216 216  
217 -
218 218  When NB-IoT sensor upload to ThingSpeak. The payload already specify which fileds related to which sensor value. Use need to create fileds in Channels Settings. with name so to see the value correctly.
219 219  
220 220  
221 -[[image:image-20230802112413-12.png||height="504" width="1011"]]
193 +[[image:image-20230802112413-12.png]]
222 222  
223 -[[image:image-20230802112413-13.png||height="331" width="978"]]
195 +[[image:image-20230802112413-13.png]]
224 224  
225 225  
226 226  Below is the NB-IoT Product Table show the mapping.
227 227  
228 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1424px" %)
229 -|(% style="background-color:#4f81bd; width:143px" %) |(% style="background-color:#4f81bd; color:white; width:103px" %)Field1|(% style="background-color:#4f81bd; color:white; width:102px" %)Field2|(% style="background-color:#4f81bd; color:white; width:157px" %)Field3|(% style="background-color:#4f81bd; color:white; width:154px" %)Field4|(% style="background-color:#4f81bd; color:white; width:153px" %)Field5|(% style="background-color:#4f81bd; color:white; width:151px" %)Field6|(% style="background-color:#4f81bd; color:white; width:160px" %)Field7|(% style="background-color:#4f81bd; color:white; width:152px" %)Field8|(% style="background-color:#4f81bd; color:white; width:67px" %)Field9|(% style="background-color:#4f81bd; color:white; width:69px" %)Field10
230 -|(% style="background-color:#4f81bd; color:white; width:143px" %)S31x-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
231 -|(% style="background-color:#4f81bd; color:white; width:143px" %)SE01-NB|(% style="width:103px" %)Temperature |(% style="width:102px" %)Humidity|(% style="width:157px" %)conduct|(% style="width:154px" %)dielectric_constant|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
232 -|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS20-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
233 -|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS45-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
234 -|(% style="background-color:#4f81bd; color:white; width:143px" %)DDS75-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
235 -|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS120-NB|(% style="width:103px" %)distance|(% style="width:102px" %)Battery|(% style="width:157px" %)RSSI|(% style="width:154px" %) |(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
236 -|(% rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SPH01-NB|(% style="width:103px" %)ph|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
237 -|(% style="background-color:#4f81bd; color:white; width:143px" %)NLM01-NB|(% style="width:103px" %)Humidity|(% style="width:102px" %)Temperature|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
238 -|(% style="background-color:#4f81bd; color:white; width:143px" %)NMDS200-NB|(% style="width:103px" %)distance1|(% style="width:102px" %)distance2|(% style="width:157px" %)Battery|(% style="width:154px" %)RSSI|(% style="width:153px" %) |(% style="width:151px" %) |(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
239 -|(% style="background-color:#4f81bd; color:white; width:143px" %)CPN01-NB|(% style="width:103px" %)alarm|(% style="width:102px" %)count|(% style="width:157px" %)door open duration|(% style="width:154px" %)calc flag|(% style="width:153px" %)Battery|(% style="width:151px" %)RSSI|(% style="width:160px" %) |(% style="width:152px" %) |(% style="width:67px" %) |(% style="width:69px" %)
240 -|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)DS03A-NB|(% colspan="1" rowspan="1" style="width:103px" %)level|(% colspan="1" rowspan="1" style="width:102px" %)alarm|(% colspan="1" rowspan="1" style="width:157px" %)pb14door open num|(% colspan="1" rowspan="1" style="width:154px" %)pb14 last open time|(% colspan="1" rowspan="1" style="width:153px" %)pb15 level status|(% colspan="1" rowspan="1" style="width:151px" %)pb15 alarm status|(% colspan="1" rowspan="1" style="width:160px" %)pb15 door open num|(% colspan="1" rowspan="1" style="width:152px" %)pb15 last open time|(% colspan="1" rowspan="1" style="width:67px" %)Battery|(% colspan="1" rowspan="1" style="width:69px" %)RSSI
241 -|(% colspan="1" rowspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod1|(% colspan="1" rowspan="1" style="width:103px" %)mod|(% colspan="1" rowspan="1" style="width:102px" %)Battery|(% colspan="1" rowspan="1" style="width:157px" %)RSSI|(% colspan="1" rowspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" rowspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" rowspan="1" style="width:151px" %)adc0|(% colspan="1" rowspan="1" style="width:160px" %)Temperature |(% colspan="1" rowspan="1" style="width:152px" %)Humidity|(% colspan="1" rowspan="1" style="width:67px" %) |(% colspan="1" rowspan="1" style="width:69px" %)
242 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod2|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc0|(% colspan="1" style="width:160px" %)distance|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
243 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod3|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)adc0|(% colspan="1" style="width:153px" %)exit_state/input PA4|(% colspan="1" style="width:151px" %)adc1|(% colspan="1" style="width:160px" %)Temperature|(% colspan="1" style="width:152px" %)Humidity|(% colspan="1" style="width:67px" %)adc4|(% colspan="1" style="width:69px" %)
244 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod4|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)DS18B20 Temp2|(% colspan="1" style="width:152px" %)DS18B20 Temp3|(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
245 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod5|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)DS18B20 Temp|(% colspan="1" style="width:153px" %)adc0|(% colspan="1" style="width:151px" %)exit_state/input PA4|(% colspan="1" style="width:160px" %)Weight|(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
246 -|(% colspan="1" style="background-color:#4f81bd; color:white; width:143px" %)SN50V3-NB mod6|(% colspan="1" style="width:103px" %)mod|(% colspan="1" style="width:102px" %)Battery|(% colspan="1" style="width:157px" %)RSSI|(% colspan="1" style="width:154px" %)count|(% colspan="1" style="width:153px" %) |(% colspan="1" style="width:151px" %) |(% colspan="1" style="width:160px" %) |(% colspan="1" style="width:152px" %) |(% colspan="1" style="width:67px" %) |(% colspan="1" style="width:69px" %)
200 +|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)Field1|(% colspan="1" rowspan="1" %)Field2|(% colspan="1" rowspan="1" %)Field3|(% colspan="1" rowspan="1" %)Field4|(% colspan="1" rowspan="1" %)Field5|(% colspan="1" rowspan="1" %)Field6|(% colspan="1" rowspan="1" %)Field7|(% colspan="1" rowspan="1" %)Field8|(% colspan="1" rowspan="1" %)(((
201 +Field9
247 247  
203 +
204 +)))|(% colspan="1" rowspan="1" %)(((
205 +Field10
248 248  
207 +
208 +)))
209 +|(% colspan="1" rowspan="1" %)S31x-NB|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
210 +|(% colspan="1" rowspan="1" %)SE01-NB|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)conduct|(% colspan="1" rowspan="1" %)dielectric_constant|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
211 +|(% colspan="1" rowspan="1" %)DDS20-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
212 +Battery
249 249  
250 -== 3.4 [[Datacake>>https://datacake.co/]] ==
214 +
215 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
216 +|(% colspan="1" rowspan="1" %)DDS45-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
217 +Battery
251 251  
219 +
220 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
221 +|(% colspan="1" rowspan="1" %)DDS75-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
222 +Battery
252 252  
253 -(% class="wikigeneratedid" %)
254 -Dragino NB-IoT sensors has its template in **[[Datacake>>https://datacake.co/]]** Platform. There are two version for NB Sensor,
224 +
225 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
226 +|(% colspan="1" rowspan="1" %)NMDS120-NB|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %)(((
227 +Battery
255 255  
229 +
230 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
231 +|(% colspan="1" rowspan="1" %)SPH01-NB|(% colspan="1" rowspan="1" %)ph|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
232 +|(% colspan="1" rowspan="1" %)NLM01-NB|(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
233 +|(% colspan="1" rowspan="1" %)NMDS200-NB|(% colspan="1" rowspan="1" %)distance1|(% colspan="1" rowspan="1" %)distance2|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
234 +|(% colspan="1" rowspan="1" %)CPN01-NB|(% colspan="1" rowspan="1" %)alarm|(% colspan="1" rowspan="1" %)count|(% colspan="1" rowspan="1" %)door open duration|(% colspan="1" rowspan="1" %)calc flag|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
235 +|(% colspan="1" rowspan="1" %)DS03A-NB|(% colspan="1" rowspan="1" %)level|(% colspan="1" rowspan="1" %)alarm|(% colspan="1" rowspan="1" %)pb14door open num|(% colspan="1" rowspan="1" %)pb14 last open time|(% colspan="1" rowspan="1" %)pb15 level status|(% colspan="1" rowspan="1" %)pb15 alarm status|(% colspan="1" rowspan="1" %)pb15 door open num|(% colspan="1" rowspan="1" %)pb15 last open time|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI
236 +|(% colspan="1" rowspan="1" %)SN50V3-NB|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
237 +|(% colspan="1" rowspan="1" %)mod1|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)DS18B20 Temp|(% colspan="1" rowspan="1" %)exit_state/input PA4|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)Temperature |(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
238 +|(% colspan="1" rowspan="1" %)mod2|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)Battery|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
239 +DS18B20 Temp
256 256  
257 -(% class="wikigeneratedid" %)
258 -As example for S31B-NB. there are two versions: **S31B-NB-1D and S31B-NB-GE.**
241 +
242 +)))|(% colspan="1" rowspan="1" %)(((
243 +exit_state/input PA4
259 259  
260 -* (% style="color:blue" %)**S31B-NB-1D**(%%): This version have pre-configure DataCake connection. User just need to Power on this device, it will auto connect send data to DataCake Server.
245 +
246 +)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)distance|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
247 +|(% colspan="1" rowspan="1" %)mod3|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
248 +Battery
261 261  
262 -* (% style="color:blue" %)**S31B-NB-GE**(%%): This verson doesn't have pre-configure Datacake connection. User need to enter the AT Commands to connect to Datacake. See below for instruction.
250 +
251 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
252 +exit_state/input PA4
263 263  
254 +
255 +)))|(% colspan="1" rowspan="1" %)adc1|(% colspan="1" rowspan="1" %)Temperature|(% colspan="1" rowspan="1" %)Humidity|(% colspan="1" rowspan="1" %)adc4|(% colspan="1" rowspan="1" %)
256 +|(% colspan="1" rowspan="1" %)mod4|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
257 +Battery
264 264  
259 +
260 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
261 +DS18B20 Temp
265 265  
266 -=== 3.4.1 Create device ===
263 +
264 +)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
265 +exit_state/input PA4
267 267  
267 +
268 +)))|(% colspan="1" rowspan="1" %)(((
269 +DS18B20 Temp2
268 268  
269 -(% style="color:blue" %)**Add Device**(%%) in DataCake.
271 +
272 +)))|(% colspan="1" rowspan="1" %)(((
273 +DS18B20 Temp3
270 270  
271 -[[image:image-20230808162301-1.png||height="473" width="994"]]
275 +
276 +)))|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
277 +|(% colspan="1" rowspan="1" %)mod5|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
278 +Battery
272 272  
280 +
281 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)(((
282 +DS18B20 Temp
273 273  
274 -[[image:image-20230808162342-2.png]]
284 +
285 +)))|(% colspan="1" rowspan="1" %)adc0|(% colspan="1" rowspan="1" %)(((
286 +exit_state/input PA4
275 275  
288 +
289 +)))|(% colspan="1" rowspan="1" %)Weight|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
290 +|(% colspan="1" rowspan="1" %)mod6|(% colspan="1" rowspan="1" %)mod|(% colspan="1" rowspan="1" %)(((
291 +Battery
276 276  
277 -(% style="color:blue" %)**Choose the correct model**(%%) from template.
293 +
294 +)))|(% colspan="1" rowspan="1" %)RSSI|(% colspan="1" rowspan="1" %)count|(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %) |(% colspan="1" rowspan="1" %)
278 278  
279 -[[image:image-20230808162421-3.png]]
296 += 4. Datacake =
280 280  
298 +== 1.1 Define Product ==
281 281  
282 -(% style="color:blue" %)**Fill Device ID**(%%). The device ID needs to be filled in with IMEI, and a prefix of(% style="color:blue" %)** 'f' **(%%)needs to be added.
300 +Firstly, we need to set the MQTT mode to datacake, and we need to run AT+PRO=3,2. This command is set to datacake. After running the command, the device automatically sets the server address, port.
283 283  
284 -[[image:image-20230808163612-7.png]]
285 285  
286 -[[image:image-20230808163035-5.png]]
303 +By chosing to add the device under a "New Product" you are required to give a name for this product. You can name it something like "My First MQTT Product".
287 287  
288 -[[image:image-20230808163049-6.png]]
305 +[[image:image-20230802112413-14.png]]
289 289  
307 +== 1.2 Create Device ==
290 290  
291 -=== 3.4.2 Scan QR code to obtain data ===
309 +In the second step you have to define the device which should be added to the product.
292 292  
311 +[[image:image-20230802112413-15.png]]
293 293  
294 -Users can use their phones or computers to scan QR codes to obtain device data information.
313 +Enter a name here (such as "My First MQTT Device") and complete the creation of the device by clicking on the "Next" button.
295 295  
296 -[[image:image-20230808170051-8.png||height="255" width="259"]]
297 297  
298 -[[image:image-20230808170548-9.png]]
316 +== 1.3 Create Database Fields ==
299 299  
318 +After creating the device, it is listed in the table of the fleet view. Now open the device by clicking on the entry in the list.
300 300  
301 -=== 3.4.2 AT command for connecting to DataCake ===
320 +You will then see a device view with an empty dashboard. Now, the first thing we want to do is navigate to the Device configuration. To do this, use the tab bar and click on "Configuration".
302 302  
322 +[[image:image-20230802112413-16.png]]
303 303  
304 -(% style="color:blue" %)**AT+PRO=2,0**
324 +[[image:image-20230802112413-17.png]]
305 305  
306 -(% style="color:blue" %)**AT+SERVADDR=67.207.76.90,4445**
326 +To create a first database field, please click on the "Add Field" button as marked in the screenshot above.
307 307  
328 +This will open another modal asking for some required input for your first field.
308 308  
309 -== 3.5 Node-Red (via MQTT) ==
330 +[[image:image-20230802112413-18.png]]
310 310  
311 -=== 3.5.1 Configure [[Node-Red>>http://wiki.dragino.com/xwiki/bin/view/Main/Node-RED/]] ===
332 +[[image:image-20230802112413-19.png]]
312 312  
334 +== 1.4 Set up Broker ==
313 313  
314 -Take S31-NB UDP protocol as an example.
336 +The broker is running on mqtt.datacake.co on ports 1883 and 8883. Port 1883 is unsecured and should not be used in production environments. Port 8883 uses a CA signed server certificate.
315 315  
316 -Dragino provides input flow examples for the sensors.
338 +You will need an access token to log into the Datacake MQTT Broker. You can use your own personal token or create a token explicitly for individual devices or groups of devices.
317 317  
318 -User can download the required JSON file through Dragino Node-RED input flow template.
340 +View your Personal Access Token
319 319  
320 -Download sample JSON file link: [[https:~~/~~/www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0>>url:https://www.dropbox.com/sh/mduw85jcuwsua22/AAAvwPhg9z6dLjJhmZjqBf_ma?dl=0]]
342 +You can view your own token via the User-Settings-Menu. You can reach this menu by clicking on "Edit Profile" at the end of the list using the Workspace Selector:
321 321  
322 -We can directly import the template.
344 +[[image:image-20230802112413-20.png]]
323 323  
324 -The templates for S31-NB and NB95S31B are the same.
346 +MQTT Client-ID
325 325  
348 +The Datacake Broker manages the client IDs internally. You do not need to worry about a client ID. If your client optionally supports the specification of a client ID, please leave this specification blank. Your client then creates a randomly generated ID.
326 326  
327 -[[image:image-20230809173127-4.png]]
350 +AT+CLIENT=“Any value”
328 328  
352 +AT+UNAME=Token
329 329  
330 -Please select the NB95S31B template.
354 +AT+PWD=Token
331 331  
332 -[[image:image-20230809173310-5.png]]
356 +[[image:image-20230802112413-21.png]]
333 333  
334 -[[image:image-20230809173438-6.png]]
335 335  
336 -[[image:image-20230809173800-7.png]]
359 +== 1.6 Create your first Subscription ==
337 337  
361 +Subscribe
338 338  
339 -Successfully imported template.
363 +Data is published according to the following structure:
340 340  
341 -[[image:image-20230809173835-8.png]]
365 +dtck~/~//
342 342  
367 +Subscribe to topics using this structure to receive messages via MQTT when readings (via API or MQTT) arrive in the Datacake Cloud. Messages are published whenever there is a change to a corresponding database field.
343 343  
344 -Users can set UDP port.
345 345  
346 -[[image:image-20230809174053-9.png]]
370 +[[image:image-20230802112413-22.png]]
347 347  
348 348  
349 -=== 3.5.2 Simulate Connection ===
373 +[[image:image-20230802112413-23.png]]
350 350  
351 351  
352 -We have completed the configuration of UDP. We can try sending packets to node red.
376 +[[image:image-20230802112413-24.png]]
353 353  
354 -[[image:image-20230810083934-1.png]]
355 355  
356 -[[image:image-20230810084048-2.png]]
379 +example:
357 357  
358 -=== 3.5.3 Configure NB-IoT Sensors ===
381 +AT+PUBTOPIC=dtck-pub/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
359 359  
383 +[[image:image-20230802112413-25.png]]
360 360  
361 -* (% style="color:blue" %)**AT+PRO=2,0(hex format) or 2,1(json format)  **(%%)** **~/~/  Set to UDP Server and  Payload
385 +== 1.7 Define Publish Topic ==
362 362  
363 -* (% style="color:blue" %)**AT+SERVADDR=xx.xx.xx.xx,port   **(%%)** **~/~/  Set Server IP and  port
387 +Publish
364 364  
389 +To upload data into the Datacake Cloud and into a specific device, you publish the data to the respective topic structure.
365 365  
391 +Due to the nature of MQTT, the topic prefix differs as follows:
366 366  
367 -== 3.6 ThingsBoard.Cloud (via MQTT) ==
393 +dtck-pub~/~//
368 368  
369 -=== 3.6.1 Configure ThingsBoard ===
395 +example:
370 370  
371 -==== 3.6.1.1 Create Device ====
397 +AT+SUBTOPIC=dtck/nbmattest/936c0db6-e9a5-4353-9fdb-3f63c8bfce7e/Temperature
372 372  
399 +== 1.8 upload data ==
373 373  
374 -Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]]. Record Device Name which is used for MQTT connection.
401 +[[image:image-20230802112413-26.png]]
375 375  
376 -[[image:image-20230802112413-32.png]]
403 +[[image:image-20230802112413-27.png]]
377 377  
405 +[[image:image-20230802112413-28.png]]
378 378  
379 -==== 3.6.1.2 Create Uplink & Downlink Converter ====
407 += =
380 380  
409 += 5. Node-Red (via MQTT) =
381 381  
382 -(% style="color:blue" %)**Uplink Converter**
383 383  
384 -The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
412 +== 1.1 Configure Node-Red ==
385 385  
386 -To create an uplink converter go to the (% style="color:blue" %)**Integrations center**(%%) -> (% style="color:blue" %)**Data converters**(%%) page and click (% style="color:blue" %)**“plus”** (%%)button. Name it (% style="color:blue" %)**“MQTT Uplink Converter”**(%%) and select type (% style="color:blue" %)"**Uplink"**(%%). Use debug mode for now.
414 +[[image:image-20230802112413-29.png]]
387 387  
388 -[[image:image-20230802112413-33.png||height="732" width="1302"]]
416 +[[image:image-20230802112413-30.png]]
389 389  
418 +== 1.2 Simulate Connection ==
390 390  
391 -(% style="color:blue" %)**Downlink Converter**
420 +[[image:image-20230802112413-31.png]]
392 392  
393 -The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
422 +== 1.3 Configure NB-IoT Sensors ==
394 394  
395 -[[image:image-20230802112413-34.png||height="734" width="1305"]]
424 +* AT+PRO=3,0(hex format) or 3,5(json format)    ~/~/Set to mqtt Server and  Payload
425 +* AT+CLIENT=any value
426 +* AT+UNAME=any value
427 +* AT+PWD=any value
428 +* AT+PUBTOPIC=any value
429 +* AT+SUBTOPIC=any value
396 396  
397 -(% style="color:red" %)**Note: Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.**
431 += 6. ThingsBoard.Cloud (via MQTT) =
398 398  
433 +== 1.1 Configure ThingsBoard ==
399 399  
400 -==== 3.6.1.3 MQTT Integration Setup ====
435 +=== 1.1.1 Create Device ===
401 401  
437 +Create a New Device in [[ThingsBoard>>url:https://thingsboard.cloud/]].
402 402  
403 -Go to the (% style="color:blue" %)**Integrations center**(%%) **->** (% style="color:blue" %)**Integrations page**(%%) and click **“(% style="color:blue" %)plus(%%)”** icon to add a new integration. Name it (% style="color:blue" %)**“MQTT Integration”**(%%), select type (% style="color:blue" %)**MQTT**;
439 +[[image:image-20230802112413-32.png]]
404 404  
405 -[[image:image-20230802112413-35.png||height="738" width="1312"]]
441 +=== 1.1.2 Create Uplink & Downlink Converter ===
406 406  
443 +Uplink Converter
407 407  
408 -* The next steps is to add the recently created uplink and downlink converters;
445 +The purpose of the decoder function is to parse the incoming data and metadata to a format that ThingsBoard can consume. deviceName and deviceType are required, while attributes and telemetry are optional. Attributes and telemetry are flat key-value objects. Nested objects are not supported.
409 409  
410 -[[image:image-20230802112413-36.png||height="736" width="1308"]]
447 +To create an uplink converter go to the Integrations center -> Data converters page and click “plus” button. Name it “MQTT Uplink Converter” and select type Uplink. Use debug mode for now.
411 411  
412 -[[image:image-20230802112413-37.png||height="735" width="1307"]]
449 +[[image:image-20230802112413-33.png]]
413 413  
414 414  
415 -(% style="color:blue" %)**Add a topic filter:**
452 +Downlink Converter
416 416  
417 -tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature  **固定的? 对的。**
454 +The Downlink converter transforming outgoing RPC message and then the Integration sends it to external MQTT broke
418 418  
419 -You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
456 +[[image:image-20230802112413-34.png]]
420 420  
421 -[[image:image-20230802112413-38.png||height="731" width="1300"]]
458 +Note:Our device payload is already human readable data. Therefore, users do not need to write decoders. Simply create by default.
422 422  
460 +=== 1.1.3 MQTT Integration Setup ===
423 423  
424 -=== 3.6.2 Simulate with MQTT.fx ===
462 +Go to the Integrations center -> Integrations page and click “plus” icon to add a new integration. Name it “MQTT Integration”, select type MQTT;
425 425  
464 +[[image:image-20230802112413-35.png]]
426 426  
466 +* The next steps is to add the recently created uplink and downlink converters;
467 +
468 +[[image:image-20230802112413-36.png]]
469 +
470 +[[image:image-20230802112413-37.png]]
471 +
472 +Add a topic filter:
473 +
474 +
475 +tb/mqtt-integration-tutorial/sensors~/~/temperature ~-~-> Temperature 固定的? 对的。
476 +
477 +You can also select an MQTT QoS level. We use MQTT QoS level 0 (At most once) by default;
478 +
479 +[[image:image-20230802112413-38.png]]
480 +
481 +== 1.2 Simulate with MQTT.fx ==
482 +
427 427  [[image:image-20230802112413-39.png]]
428 428  
429 429  [[image:image-20230802112413-40.png]]
430 430  
487 +== 1.3 Configure NB-IoT Sensor ==
431 431  
432 -=== 3.6.3 Configure NB-IoT Sensor ===
489 +AT Commands
433 433  
491 +AT+PRO=3,3  ~/~/ Use MQTT to connect to ThingsBoard.
434 434  
435 -(% style="color:blue" %)**AT Commands**
493 +AT+SUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
436 436  
437 -* (% style="color:#037691" %)**AT+PRO=3,3  **(%%)** **~/~/ Use MQTT to connect to ThingsBoard. Payload Type set to 3.
495 +AT+PUBTOPIC=device name ~-~-> 只需要 Device Name 吗?对的
438 438  
439 -* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>**
440 440  
441 -* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>**
498 +Users do not need to fill in the client, username, and password. But the configuration information of the device requires setting the client, username, and password, which can be entered freely. (软件自动填充为 Device Name 吧).这边不用提示了，客户不需要输入。（大部分客户还是会自己去设置这个的，提高安全性）
442 442  
443 -* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
500 +CLIENT :“Any value”
444 444  
445 -* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
502 +User Name:“Any value”
446 446  
447 -* (% style="color:#037691" %)**AT+PWD=<device name> or User Defined**
504 +Password:“Any value”
448 448  
506 +
449 449  Test Uplink by click the button for 1 second
450 450  
451 451  [[image:image-20230802112413-41.png]]
... ... @@ -455,11 +455,10 @@
455 455  [[image:image-20230802112413-43.png]]
456 456  
457 457  
458 -== 3.7 [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) ==
516 += 7. [[Tago.io>>url:https://admin.tago.io/]] (via MQTT) =
459 459  
460 -=== 3.7.1 Create device & Get Credentials ===
518 +== 5.1 Create device & Get Credentials ==
461 461  
462 -
463 463  We use MQTT Connection to send data to [[Tago.io>>url:https://admin.tago.io/]]. We need to Create Device and Get MQTT Credentials first.
464 464  
465 465  [[image:image-20230802112413-44.png]]
... ... @@ -466,6 +466,7 @@
466 466  
467 467  [[image:image-20230802112413-45.png]]
468 468  
526 += =
469 469  
470 470  Go to the Device section and create a device. Then, go to the section tokens and copy your device-token.
471 471  
... ... @@ -472,84 +472,55 @@
472 472  [[image:image-20230802112413-46.png]]
473 473  
474 474  
475 -The device needs to enable the TLS mode and set the (% style="color:blue" %)**AT+TLSMOD=1,0**(%%) command.
533 +On the Connection Profile window, set the following information: (这边加一个截图)
476 476  
477 -(% style="color:blue" %)**On the Connection Profile window, set the following information:**
535 +* Profile Name: “Any name”
536 +* Broker Address: mqtt.tago.io
537 +* Broker Port: 1883
538 +* Client ID: “Any value”
478 478  
479 -* (% style="color:#037691" %)**Profile Name: “Any name”**
540 +On the section User credentials, set the following information:(这边加一个截图)
480 480  
481 -* (% style="color:#037691" %)**Broker Address: mqtt.tago.io**
542 +* User Name: “Any value” Tago validates your user by the token only
543 +* Password: “Your device token”
544 +* PUBTOPIC: “Any value”
545 +* SUBTOPIC: “Any value”
482 482  
483 -* (% style="color:#037691" %)**Broker Port: 8883**
547 +== 5.2 Simulate with MQTT.fx ==
484 484  
485 -* (% style="color:#037691" %)**Client ID: “Any value”**
549 +[[image:image-20230802112413-47.png]]
486 486  
487 -(% style="color:blue" %)**On the section User credentials, set the following information:**
551 +[[image:image-20230802112413-48.png]]
488 488  
489 -* (% style="color:#037691" %)**User Name: “Any value”** (%%) **~/~/ Tago validates your user by the token only**
553 +Users can run the AT+PRO=3,5 command, and the payload will be converted to JSON format.
490 490  
491 -* (% style="color:#037691" %)**Password: “Your device token”**
555 +[[image:image-20230802112413-49.png]]
492 492  
493 -* (% style="color:#037691" %)**PUBTOPIC: “Any value”**
557 +== 1.4. tago data ==
494 494  
495 -* (% style="color:#037691" %)**SUBTOPIC: “Any value”**
496 496  
497 -(% style="color:blue" %)**AT command:**
560 +[[image:image-20230802112413-50.png]]
498 498  
499 -* (% style="color:#037691" %)**AT+PRO=3,0 or 3,5 ** (%%) **~/~/ hex format or json format**
562 +[[image:image-20230802112413-51.png]]
500 500  
501 -* (% style="color:#037691" %)**AT+SUBTOPIC=<device name>or User Defined**
564 +== 1.4. TLS mode ==
502 502  
503 -* (% style="color:#037691" %)**AT+PUBTOPIC=<device name>or User Defined**
566 +Users can choose to use SSL/TLS mode.
504 504  
505 -* (% style="color:#037691" %)**AT+CLIENT=<device name> or User Defined**
568 +On the SSL/TLS section, check the option Enable SSL/TLS, and click OK.
506 506  
507 -* (% style="color:#037691" %)**AT+UNAME=<device name> or User Defined**
570 +The device needs to enable the TLS mode and set the AT+TLSMOD=1,0 command.
508 508  
509 -* (% style="color:#037691" %)**AT+PWD=“Your device token”**
572 +* Profile Name: “Any name”
573 +* Broker Address: mqtt.tago.io
574 +* Broker Port: 8883
575 +* Client ID: “Any value”
576 +* User Name: “Any value” Tago validates your user by the token only
577 +* Password: “Your device token”
578 +* PUBTOPIC: “Any value”
579 +* SUBTOPIC: “Any value”
510 510  
511 -
512 -
513 -=== 3.7.2 Simulate with MQTT.fx ===
514 -
515 -
516 516  [[image:image-20230802112413-52.png]]
517 517  
518 518  
519 -[[image:image-20230808105300-2.png]]
520 -
521 -
522 -Users can run the (% style="color:blue" %)**AT+PRO=3,5**(%%) command, and the payload will be converted to **JSON format**.
523 -
524 -[[image:image-20230808105217-1.png]]
525 -
526 -[[image:image-20230808105329-3.png]]
527 -
528 -
529 -=== 3.7.3 tago data ===
530 -
531 -
532 -[[image:image-20230802112413-50.png]]
533 -
534 -[[image:image-20230802112413-51.png||height="184" width="696"]]
535 -
536 -
537 -== 3.8 TCP Connection ==
538 -
539 -
540 -(% style="color:blue" %)**AT command:**
541 -
542 -* (% style="color:#037691" %)**AT+PRO=4,0   ** (%%) ~/~/ Set to use TCP protocol to uplink(HEX format)
543 -
544 -* (% style="color:#037691" %)**AT+PRO=4,1   ** (%%) ~/~/ Set to use TCP protocol to uplink(JSON format)
545 -
546 -* (% style="color:#037691" %)**AT+SERVADDR=120.24.4.116,5600 ** (%%) ~/~/ to set TCP server address and port
547 -
548 -(% style="color:blue" %)**Sensor Console Output when Uplink:**
549 -
550 -[[image:image-20230807233631-1.png]]
551 -
552 -
553 -(% style="color:blue" %)**See result in TCP Server:**
554 -
555 -[[image:image-20230807233631-2.png]]
584 +
image-20230807233631-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -21.9 KB
Content
image-20230807233631-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -9.6 KB
Content
image-20230808105217-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -68.5 KB
Content
image-20230808105300-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -70.1 KB
Content
image-20230808105329-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -21.1 KB
Content
image-20230808162301-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -76.9 KB
Content
image-20230808162342-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -63.8 KB
Content
image-20230808162421-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -59.2 KB
Content
image-20230808162727-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -54.2 KB
Content
image-20230808163035-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -71.6 KB
Content
image-20230808163049-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -61.5 KB
Content
image-20230808163612-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -53.4 KB
Content
image-20230808170051-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -21.5 KB
Content
image-20230808170548-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -54.1 KB
Content
image-20230808205045-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -373.9 KB
Content
image-20230809165928-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -74.4 KB
Content
image-20230809170225-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -39.9 KB
Content
image-20230809170532-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -38.7 KB
Content
image-20230809173127-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -82.5 KB
Content
image-20230809173310-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -51.9 KB
Content
image-20230809173438-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -41.0 KB
Content
image-20230809173800-7.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -46.8 KB
Content
image-20230809173835-8.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -88.8 KB
Content
image-20230809174053-9.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -58.0 KB
Content
image-20230809180523-10.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -91.9 KB
Content
image-20230810083934-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -85.1 KB
Content
image-20230810084048-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.David
Size
... ... @@ -1,1 +1,0 @@
1 -63.7 KB
Content
image-20230816201942-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Edwin
Size
... ... @@ -1,1 +1,0 @@
1 -99.8 KB
Content