Changes for page End Device AT Commands and Downlink Command

Summary

• Page properties (2 modified, 0 added, 0 removed)
• Attachments (0 modified, 0 added, 6 removed)
  • image-20240906095336-1.png
  • image-20240906095433-2.png
  • image-20240906095527-3.png
  • image-20240906095619-4.png
  • image-20240906095726-5.png
  • image-20240906095811-6.png

Details

Page properties

Author

...	...	@@ -1,1 +1,1 @@
1		-XWiki.ting
	1	+XWiki.Xiaoling

Content

...	...	@@ -1,4 +1,4 @@
1		- **Table of** **Contents：**
	1	+ **Contents：**
2	2
3	3	{{toc/}}
4	4
...	...	@@ -6,45 +6,39 @@
6	6
7	7	= 1. Introduction =
8	8
9		-
10	10	Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11	11
12		-* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
	11	+* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
	12	+* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13	13
14		-* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
15		-
16	16	(((
17	17	**This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
	16	+
18	18	)))
19	19
20		-
21		-
22		-
23		-
24		-
25		-
26		-
27		-
28	28	= 2. How to use AT Commands or Downlink command =
29	29
30		-
31		-* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of **[[Dragino Products User Manual>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/]]**.
32		-
33		-* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
	21	+* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
	22	+* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
34	34	** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
35		-** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
	24	+** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
36	36	** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
37	37
38		-(% style="display:none" %) (%%)
39	39
40	40	= 3. Support End Node and firmware version =
41	41
42		-
	30	+(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
	31	+|=(% colspan="3" style="width: 963px;" %)(((
43	43	Dragino STM32 base hardware Firmware / LoRaWAN stack list
44		-
45		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:966px" %)
46		-|(% style="background-color:#4f81bd; color:white; width:187px" %)**Model**|(% style="background-color:#4f81bd; color:white; width:330px" %)**Description**|(% style="background-color:#4f81bd; color:white; width:445px" %)**Firmware Version <~-~-> Stack Version**
	33	+)))
47	47	|(% style="width:187px" %)(((
	35	+**Model**
	36	+)))|(% style="width:330px" %)(((
	37	+**Description**
	38	+)))|(% style="width:445px" %)(((
	39	+**Firmware Version <~-~-> Stack Version**
	40	+)))
	41	+|(% style="width:187px" %)(((
48	48	[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
49	49	)))|(% style="width:330px" %)(((
50	50	Open Source Generic LoRaWAN Sensor Node
...	...	@@ -104,20 +104,22 @@
104	104	)))
105	105	)))
106	106
107		-(% style="display:none" %) (%%)
108	108
	102	+
109	109	= 4. System Management Commands =
110	110
111	111	== 4.1 Change Uplink Interval ==
112	112
113		-
114	114	Feature: Change LoRaWAN End Node Transmit Interval.
115	115
	109	+(% class="box infomessage" %)
	110	+(((
	111	+**AT Command: AT+TDC**
	112	+)))
116	116
117		-(% style="color:blue" %)**AT Command: AT+TDC**
118		-
119		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:727.222px" %)
120		-|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:329px" %)**Response**
	114	+(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
	115	+|=(% colspan="3" style="width: 724px;" %)AT+TDC
	116	+|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
121	121	|(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
122	122	OK
123	123
...	...	@@ -127,33 +127,35 @@
127	127	Set transmit interval to 60000ms = 60 seconds
128	128	)))
129	129
130		-(((
131		-(% style="color:blue" %)**Downlink Command: 0x01**
	126	+{{info}}
	127	+**Downlink Command: 0x01**
	128	+{{/info}}
132	132
	130	+(((
133	133	Format: Command Code (0x01) followed by 3 bytes time value.
134	134	)))
135	135
136	136	(((
137		-If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
	135	+If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
138	138	)))
139	139
140		-* **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
	138	+* **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
	139	+* **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
141	141
142		-* **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
143	143
144		-(% style="display:none" %) (%%)
145	145
146	146	== 4.2 Reboot End Node ==
147	147
148		-
149	149	Feature: Reboot End Node to perform a new OTAA or ABP Join.
150	150
	147	+{{info}}
	148	+**AT Command: ATZ**
	149	+{{/info}}
151	151
152		-(% style="color:blue" %)**AT Command: ATZ  ~/~/ **(%%)Trig a reset of the MCU
153		-
154		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:546px" %)
155		-|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:92px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:294px" %)**Response**
156		-|(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
	151	+(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
	152	+|=(% colspan="3" %)ATZ: Trig a reset of the MCU
	153	+|**Command Example**|**Function**|**Response**
	154	+|ATZ|Reset MCU|(((
157	157	Device reset and show booting info
158	158
159	159	LSN50 Device/LoRa ST Module
...	...	@@ -167,7 +167,9 @@
167	167	<followed by the Tx and Rx information>
168	168	)))
169	169
170		-(% style="color:blue" %)**Downlink Command: 0x04**
	168	+{{info}}
	169	+**Downlink Command: 0x04**
	170	+{{/info}}
171	171
172	172	(((
173	173	Format: Command Code (0x04) followed by FF.
...	...	@@ -174,21 +174,23 @@
174	174	)))
175	175
176	176	(((
177		-If the downlink payload=**04FF**, the end node will reboot.
	177	+If the downlink payload=**04FF**, the end node will reboot.
	178	+
	179	+
178	178	)))
179	179
180		-
181	181	== 4.3 Reset to factory Default ==
182	182
183		-
184	184	Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
185	185
	186	+{{info}}
	187	+**AT Command: AT+FDR**
	188	+{{/info}}
186	186
187		-(% style="color:blue" %)**AT Command: AT+FDR  ~/~/  **(%%)Reset to factory default
188		-
189		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:789px" %)
190		-|(% style="background-color:#4f81bd; color:white; width:154px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:175px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:456px" %)**Response**
191		-|(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
	190	+(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
	191	+|=(% colspan="3" style="width: 828px;" %)Reset to factory default
	192	+|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
	193	+|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
192	192	Device reset to factory default parameters and show booting info
193	193
194	194	LSN50 Device/LoRa ST Module
...	...	@@ -202,7 +202,9 @@
202	202	Please set the parameters or reset Device to apply change
203	203	)))
204	204
205		-(% style="color:blue" %)**Downlink Command: 0x04**
	207	+{{info}}
	208	+**Downlink Command: 0x04**
	209	+{{/info}}
206	206
207	207	(((
208	208	Format: Command Code (0x04) followed by FE.
...	...	@@ -215,34 +215,35 @@
215	215
216	216	== 4.4 Show Firmware Version ==
217	217
218		-
219	219	Feature: Show firmware version. No downlink command yet.
220	220
	224	+{{info}}
	225	+**AT Command: AT+VER**
	226	+{{/info}}
221	221
222		-(% style="color:blue" %)**AT Command: AT+VER  ~/~/   **(%%)Image Version and Frequency Band
223		-
224		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:542px" %)
225		-|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:86px" %)**Response**
226		-|(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
	228	+(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
	229	+|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
	230	+|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
	231	+|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
227	227	1.3 EU868
228	228
229	229	OK
230	230	)))
231	231
232		-(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
	237	+{{info}}
	238	+**Downlink Command: 0x26 (Valid in 006 stack)**
	239	+{{/info}}
233	233
234	234	(((
235		-Format: Command Code (0x26) followed by 1 byte.
	242	+Downlink Format: 0x26
236	236	)))
237	237
238	238	(((
239		-If the downlink payload=**2601, **Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes(  FPort= 5 usually).
	246	+Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
240	240	)))
241	241
242	242	(((
243		-
244		-
245		-(% style="color:#037691" %)**xx: Software Type:**
	250	+**xx: Software Type:**
246	246	)))
247	247
248	248	* 0x00 01: LGT92 Version
...	...	@@ -250,9 +250,7 @@
250	250	* 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
251	251
252	252	(((
253		-
254		-
255		-(% style="color:#037691" %)**yy: Frequency Band:**
	258	+**yy: Frequency Band:**
256	256	)))
257	257
258	258	* 0x01: EU868
...	...	@@ -262,14 +262,12 @@
262	262	* 0x05: KZ865
263	263	* 0x06: RU864
264	264	* 0x07: AS923
265		-* 0x08: AS923-2
266		-* 0x09: AS923-3
267		-* 0xa0: AS923-4
	268	+* 0x08: AS923-1
	269	+* 0x09: AS923-2
	270	+* 0xa0: AS923-3
268	268
269	269	(((
270		-
271		-
272		-(% style="color:#037691" %)**zz: Subband**
	273	+**zz: Subband**
273	273	)))
274	274
275	275	firmware version: v1.1.0 ~-~-> 110
...	...	@@ -277,100 +277,79 @@
277	277
278	278	== 4.5 Show System Configure ==
279	279
280		-
281	281	Feature: Show All configure. No downlink command yet.
282	282
	283	+{{info}}
	284	+**AT Command: AT+CFG**
	285	+{{/info}}
283	283
284		-(% style="color:blue" %)**AT Command: AT+CFG  ~/~/ **(%%)Print all configurations
285		-
286		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:599.222px" %)
287		-|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:154px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:280px" %)**Response**
	287	+(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
	288	+|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
	289	+|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
288	288	|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
289	289	AT+DEUI = XX XX XX XX XX XX XX XX
	292	+
290	290	AT+DADDR=XXXXXXXX
	294	+
291	291	……….
	296	+
292	292	AT+RX2WTO=X
	298	+
293	293	AT+CHS=868100000
294		-OK
295		-)))
296	296
297		-(% style="display:none" %) (%%)
298		-
299		-== 4.6 Set time synchronization method(The network server must support LoRaWAN v1.0.3) ==
300		-
301		-
302		-Feature: Set the system time synchronization.
303		-
304		-(% style="color:blue" %)**AT Command: AT+SYNCMOD**
305		-
306		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:532.778px" %)
307		-|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:216px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:148px" %)**Response**
308		-|(% style="width:165px" %)AT+SYNCMOD=?|(% style="width:216px" %)Get the current time synchronization configuration|(% style="width:148px" %)(((
309		-1 (Default)
310		-
311		-(((
312	312	OK
313	313	)))
314		-)))
315		-|(% style="width:165px" %)AT+SYNCMOD=0|(% style="width:216px" %)Disenable system time synchronization.|(% style="width:148px" %)OK
316		-|(% style="width:165px" %)AT+SYNCMOD=1|(% style="width:216px" %)Enable system time synchronization.|(% style="width:148px" %)OK
317	317
318		-(% style="color:blue" %)**Downlink Command: 0x28 **
319	319
320		-Format: Command Code (0x28) followed by 1 byte.
321	321
322		-* Example 1: 28 00  ~/~/Equal to AT+SYNCMOD=0
323		-* Example 2: 28 01  ~/~/Equal to AT+SYNCMOD=1
324		-
325		-(% style="color:red" %)**Note: This command takes effect after the node is reset, or after downlink 0x2601(query device status).**
326		-
327		-
328	328	= 5. Keys, IDs and EUIs management =
329	329
330	330	== 5.1 Application EUI ==
331	331
332		-
333	333	Feature: Get or Set the Application EUI.
334	334
	312	+{{info}}
	313	+**AT Command: AT+APPEUI**
	314	+{{/info}}
335	335
336		-(% style="color:blue" %)**AT Command: AT+APPEUI**
337		-
338		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:643px" %)
339		-|(% style="background-color:#4f81bd; color:white; width:272px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:182px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:184px" %)**Response**
340		-|(% style="width:272px" %)AT+APPEUI=?|(% style="width:182px" %)Get the Application EUI|(% style="width:184px" %)00 b3 d5 00 00 00 00 00(((
	316	+(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
	317	+|=(% colspan="3" style="width: 683px;" %)AT+APPEUI
	318	+|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
	319	+|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
341	341	OK
342	342	)))
343		-|(% style="width:272px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:182px" %)Set the Application EUI|(% style="width:184px" %)OK
	322	+|(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
344	344
345		-(% style="display:none" %) (%%)
346	346
	325	+
347	347	== 5.2 Application Key ==
348	348
349		-
350	350	Feature: Get or Set the Application Key.
351	351
	330	+{{info}}
	331	+**AT Command: AT+APPKEY**
	332	+{{/info}}
352	352
353		-(% style="color:blue" %)**AT Command: AT+APPKEY**
354		-
355		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:976.222px" %)
356		-|(% style="background-color:#4f81bd; color:white; width:441px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:180px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:350px" %)**Response**
	334	+(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
	335	+|=(% colspan="3" style="width: 973px;" %)AT+APPKEY
	336	+|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
357	357	|(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
358	358	OK
359	359	)))
360	360	|(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
361	361
362		-(% style="display:none" %) (%%)
363	363
364	364	== 5.3 Application Session Key ==
365	365
366		-
367	367	Feature: Get or Set the Application Session Key.
368	368
	347	+{{info}}
	348	+**AT Command: AT+APPSKEY**
	349	+{{/info}}
369	369
370		-(% style="color:blue" %)**AT Command: AT+APPSKEY**
371		-
372		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1040.22px" %)
373		-|(% style="background-color:#4f81bd; color:white; width:451px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:231px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:354px" %)**Response**
	351	+(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
	352	+|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
	353	+|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
374	374	|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
375	375	OK
376	376	)))
...	...	@@ -378,18 +378,18 @@
378	378	OK
379	379	)))
380	380
381		-(% style="display:none" %) (%%)
382	382
383	383	== 5.4 Device Address ==
384	384
385		-
386	386	Feature: Get or Set the Device Address.
387	387
	366	+{{info}}
	367	+**AT Command: AT+DADDR**
	368	+{{/info}}
388	388
389		-(% style="color:blue" %)**AT Command: AT+DADDR**
390		-
391		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:795.222px" %)
392		-|(% style="background-color:#4f81bd; color:white; width:192px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:241px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:359px" %)**Response**
	370	+(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
	371	+|=(% colspan="3" style="width: 792px;" %)AT+DADDR
	372	+|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
393	393	|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
394	394	A8 40 41 FF
395	395
...	...	@@ -397,18 +397,18 @@
397	397	)))
398	398	|(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
399	399
400		-(% style="display:none" %) (%%)
401	401
402	402	== 5.5 Device EUI ==
403	403
404		-
405	405	Feature: Get or Set the Device EUI.
406	406
	385	+{{info}}
	386	+**AT Command: AT+DEUI**
	387	+{{/info}}
407	407
408		-(% style="color:blue" %)**AT Command: AT+DEUI**
409		-
410		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1035.22px" %)
411		-|(% style="background-color:#4f81bd; color:white; width:250px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:634px" %)**Response**
	389	+(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
	390	+|=(% colspan="3" style="width: 1032px;" %)AT+DEUI
	391	+|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
412	412	|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
413	413	OK
414	414	)))
...	...	@@ -416,56 +416,54 @@
416	416	OK
417	417	)))
418	418
419		-(% style="display:none" %) (%%)
420	420
421	421	== 5.6 Network ID ==
422	422
423		-
424	424	Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
425	425
	404	+{{info}}
	405	+**AT Command: AT+NWKID**
	406	+{{/info}}
426	426
427		-(% style="color:blue" %)**AT Command: AT+NWKID**
428		-
429		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:448.222px" %)
430		-|(% style="background-color:#4f81bd; color:white; width:191px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:153px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
	408	+(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
	409	+|=(% colspan="3" style="width: 445px;" %)AT+NWKID
	410	+|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
431	431	|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
432	432	OK
433	433	)))
434	434	|(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
435	435
436		-(% style="display:none" %) (%%)
437	437
438	438	== 5.7 Network Session Key ==
439	439
440		-
441	441	Feature: Get or Set the Network Session Key
442	442
	421	+{{info}}
	422	+**AT Command: AT+NWKSKEY**
	423	+{{/info}}
443	443
444		-(% style="color:blue" %)**AT Command: AT+NWKSKEY**
445		-
446		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1017.22px" %)
447		-|(% style="background-color:#4f81bd; color:white; width:455px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:215px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:343px" %)**Response**
	425	+(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
	426	+|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
	427	+|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
448	448	|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
449	449	OK
450	450	)))
451	451	|(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
452	452
453		-(% style="display:none" %) (%%)
454	454
455	455	= 6. Joining and sending date on LoRaWAN network =
456	456
457	457	== 6.1 Confirm Mode ==
458	458
459		-=== 6.1.1  AT+CFM command before DR-LWS007 software stack ===
460		-
461		-
462	462	Feature: Get or Set the confirmation mode (0-1).
463	463
	440	+{{info}}
	441	+**AT Command: AT+CFM**
	442	+{{/info}}
464	464
465		-(% style="color:blue" %)**AT Command: AT+CFM**
466		-
467		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:710.222px" %)
468		-|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:205px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:346px" %)**Response**
	444	+(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
	445	+|=(% colspan="3" style="width: 707px;" %)AT+CFM
	446	+|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
469	469	|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
470	470	OK
471	471	)))
...	...	@@ -472,108 +472,62 @@
472	472	|(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
473	473	|(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
474	474
475		-(% style="color:blue" %)**Downlink Command: 0x05**
	453	+Downlink Command: 0x05
476	476
477		-Format: Command Code (0x05) followed by 1 byte mode value.
	455	+Format: Command Code (0x05) followed by 2 bytes mode value.
478	478
479	479	If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
480	480
481		-* **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
	459	+* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
	460	+* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
482	482
483		-* **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
484	484
485		-(% style="display:none" %) (%%)
486		-
487		-=== 6.1.2  AT+CFM command since DR-LWS007 software stack ===
488		-
489		-
490		-(% style="color:blue" %)**AT Command: AT+CFM**
491		-
492		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:462px" %)
493		-|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
494		-|(% style="width:160px" %)(((
495		-AT+CFM=1,0,0
496		-
497		-value1
498		-)))|(% style="width:198px" %)confirmed uplink|(% style="width:100px" %)(((
499		-1
500		-
501		-OK
502		-)))
503		-|(% style="width:160px" %)(((
504		-AT+CFM=0,?,0
505		-
506		-value2
507		-)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:100px" %)(((
508		-0~~7
509		-
510		-OK
511		-)))
512		-|(% style="width:160px" %)(((
513		-AT+CFM=0,0,1
514		-
515		-value3
516		-)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:100px" %)(((
517		-1
518		-
519		-OK
520		-)))
521		-
522		-(% style="color:blue" %)**Downlink Command: 0x05**
523		-
524		-Format: Command Code (0x05) followed by 3 bytes mode value.
525		-
526		-If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
527		-
528		-* **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
529		-
530		-* **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
531		-
532		-(% style="display:none" %) (%%)
533		-
534	534	== 6.2 Confirm Status ==
535	535
536		-
537	537	Feature: Get confirmation status of the last AT+SEND (0-1).
538	538
	467	+{{info}}
	468	+**AT Command: AT+CFS**
	469	+{{/info}}
539	539
540		-(% style="color:blue" %)**AT Command: AT+CFS**
541		-
542		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:463px" %)
543		-|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
544		-|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
	471	+(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
	472	+|=(% colspan="3" style="width: 531px;" %)AT+CFS
	473	+|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
	474	+|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
545	545	OK
546	546	)))
547	547
548		-(% style="display:none" %) (%%)
549	549
550	550	== 6.3 Join LoRa® Network ==
551	551
552		-
553	553	Feature: Join network.
554	554
	483	+{{info}}
	484	+**AT Command: AT+JOIN**
	485	+{{/info}}
555	555
556		-(% style="color:blue" %)**AT Command: AT+JOIN**
557		-
558		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:647.222px" %)
559		-|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:334px" %)**Response**
	487	+(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
	488	+|=(% colspan="3" style="width: 644px;" %)AT+JOIN
	489	+|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
560	560	|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
561	561	OK
	492	+
562	562	While Error in format, return AT_BUSY_ERROR
563	563	)))
564	564
565		-(% style="display:none" %) (%%)
566	566
	497	+
567	567	== 6.4 LoRa® Network Join Mode ==
568	568
569		-
570	570	Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
571	571
	502	+{{info}}
	503	+**AT Command: AT+NJM**
	504	+{{/info}}
572	572
573		-(% style="color:blue" %)**AT Command: AT+NJM**
574		-
575		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:753.222px" %)
576		-|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
	506	+(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
	507	+|=(% colspan="3" style="width: 750px;" %)AT+NJM
	508	+|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
577	577	|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
578	578	OK
579	579	)))
...	...	@@ -580,164 +580,175 @@
580	580	|(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
581	581	|(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
582	582
583		-(% style="color:blue" %)**Downlink Command: 0x20**
	515	+{{info}}
	516	+**Downlink Command: 0x20**
	517	+{{/info}}
584	584
585	585	Format: Command Code (0x20) followed by 1 bytes mode value.
586	586
587	587	If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
588	588
589		-* **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
	523	+* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
	524	+* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
590	590
591		-* **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
592	592
593		-(% style="display:none" %) (%%)
594	594
595	595	== 6.5 LoRa® Network Join Status ==
596	596
597		-
598	598	Feature: LoRa® Network Join Status.
599	599
	532	+{{info}}
	533	+**AT Command: AT+NJS**
	534	+{{/info}}
600	600
601		-(% style="color:blue" %)**AT Command: AT+NJS**
602		-
603		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:435px" %)
604		-|(% style="background-color:#4f81bd; color:white; width:169px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:164px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:97px" %)**Response**
605		-|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:97px" %)0(((
	536	+(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
	537	+|=(% colspan="3" style="width: 495px;" %)AT+NJS
	538	+|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
	539	+|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
606	606	OK
607	607	)))
608	608
609		-(% style="display:none" %) (%%)
610	610
	544	+
611	611	== 6.6 Print Last Received Data in Raw Format ==
612	612
613		-
614	614	Feature: Print Last Received Data in Raw Format<port:data>.
615	615
	549	+{{info}}
	550	+**AT Command: AT+RECV**
	551	+{{/info}}
616	616
617		-(% style="color:blue" %)**AT Command: AT+RECV**
618		-
619		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:543px" %)
620		-|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
621		-|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:104px" %)0:(((
	553	+(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
	554	+|=(% colspan="3" style="width: 584px;" %)AT+RECV
	555	+|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
	556	+|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
622	622	OK
623	623	)))
624	624
625		-(% style="display:none" %) (%%)
626	626
	561	+
627	627	== 6.7 Print Last Received Data in Binary Format ==
628	628
629		-
630	630	Feature: Print Last Received Data in Binary Format<port:data>.
631	631
	566	+{{info}}
	567	+**AT Command: AT+RECVB**
	568	+{{/info}}
632	632
633		-(% style="color:blue" %)**AT Command: AT+RECVB**
634		-
635		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:793.222px" %)
636		-|(% style="background-color:#4f81bd; color:white; width:173px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:497px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:120px" %)**Response**
	570	+(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
	571	+|=(% colspan="3" style="width: 790px;" %)AT+RECVB
	572	+|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
637	637	|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
638	638	OK
639	639	)))
640	640
641		-(% style="display:none" %) (%%)
642	642
643		-== 6.8 Send Text Data（Note: The format of this command of LA66 is subject to the manual） ==
644	644
	579	+== 6.8 Send Text Data ==
645	645
646	646	Feature: Send Text Data<port:data>.
647	647
	583	+{{info}}
	584	+**AT Command: AT+SEND**
	585	+{{/info}}
648	648
649		-(% style="color:blue" %)**AT Command: AT+SEND**
650		-
651		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:991.222px" %)
652		-|(% style="background-color:#4f81bd; color:white; width:201px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:340px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:446px" %)**Response**
	587	+(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
	588	+|=(% colspan="3" style="width: 988px;" %)AT+SEND
	589	+|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
653	653	|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
654	654	While Error in format, return
	592	+
655	655	AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
	594	+
	595	+
656	656	)))
657	657
658		-(% style="display:none" %) (%%)
659	659
660		-== 6.9 Send Hexadecimal Data（Note: The format of this command of LA66 is subject to the manual） ==
661	661
	600	+== 6.9 Send Hexadecimal Data ==
662	662
663	663	Feature: Send hexadecimal data along with the application port.
664	664
	604	+{{info}}
	605	+**AT Command: AT+SENDB**
	606	+{{/info}}
665	665
666		-(% style="color:blue" %)**AT Command: AT+SENDB**
	608	+(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
	609	+|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
	610	+|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
	611	+|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
	612	+|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
	613	+AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
667	667
668		-(% border="1" cellspacing="4" style="width:974px" %)
669		-|(% style="background-color:#4f81bd; color:white; width:257px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:394px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:318px" %)**Response**
670		-|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)OK
671		-|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)While Error in format, return(((
672		-AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
	615	+
673	673	)))
674	674
675		-(% style="display:none" %) (%%)
676	676
	619	+
677	677	= 7. LoRaWAN network management =
678	678
679	679	== 7.1 Adaptive Data Rate ==
680	680
681		-
682	682	Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
683	683
	626	+{{info}}
	627	+**AT Command: AT+ADR**
	628	+{{/info}}
684	684
685		-(% style="color:blue" %)**AT Command: AT+ADR**
686		-
687		-(% border="1" cellspacing="4" style="width:643px" %)
688		-|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:266px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:209px" %)**Response**
689		-|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:209px" %)1(((
	630	+(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
	631	+|=(% colspan="3" style="width: 680px;" %)AT+ADR
	632	+|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
	633	+|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
690	690	OK
691	691	)))
692		-|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)OK
693		-|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)While Error in format, return(((
	636	+|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK
	637	+|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((
694	694	AT_PARAM_ERROR
695	695	)))
696	696
697		-(% style="color:blue" %)**Downlink Command: 0x22**
	641	+{{info}}
	642	+**Downlink Command: 0x22**
	643	+{{/info}}
698	698
	645	+
699	699	If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
700	700
701		-* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
	648	+* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
	649	+* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
702	702
703		-* **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
704	704
705		-(% style="display:none" %) (%%)
706	706
707	707	== 7.2 LoRa® Class ==
708	708
709		-
710	710	Feature: Get or Set the Device Class(Currently only support class A, class C).
711	711
	657	+{{info}}
	658	+**AT Command:AT+CLASS**
	659	+{{/info}}
712	712
713		-(% style="color:blue" %)**AT Command:  AT+CLASS**
714		-
715		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:428px" %)
716		-|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:166px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:94px" %)**Response**
717		-|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:94px" %)A(((
	661	+(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
	662	+|=(% colspan="3" style="width: 504px;" %)AT+CLASS
	663	+|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
	664	+|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
718	718	OK
719	719	)))
720		-|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:94px" %)OK(((
	667	+|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((
721	721
722	722	)))
723	723
724		-(% style="display:none" %)
725	725
726		-(% style="color:red" %)**Notice:**
727	727
728		-* Run AT+FDR before running AT+CLASS=C
729		-* After change to Class=C, Before OTAA Join Successfule, the end node will still shows to use CLASS=A for OTAA Joined. It will use CLASS=C after OTAA Join Succeccful.
730		-
731	731	== 7.3 Duty Cycle Setting ==
732	732
	675	+Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
733	733
734		-Feature: Get or Set the ETSI Duty Cycle setting** : 0**=disable, **1**=enable - Only for testing.
	677	+{{info}}
	678	+**AT Command:AT+DCS**
	679	+{{/info}}
735	735
736		-
737		-(% style="color:blue" %)**AT Command:  AT+DCS**
738		-
739		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515.222px" %)
740		-|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
	681	+(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
	682	+|=(% colspan="3" style="width: 512px;" %)AT+DCS
	683	+|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
741	741	|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
742	742	OK
743	743	)))
...	...	@@ -745,69 +745,67 @@
745	745
746	746	)))
747	747
748		-(% style="display:none" %) (%%)
749	749
	692	+
750	750	== 7.4 Data Rate ==
751	751
	695	+Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
752	752
753		-Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
	697	+{{info}}
	698	+**AT Command: AT+DR**
	699	+{{/info}}
754	754
755		-(% style="color:red" %)
756		-**Notice:**
757		-
758		-* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
759		-
760		-* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
761		-
762		-(% style="color:blue" %)**AT Command: AT+DR**
763		-
764		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:409px" %)
765		-|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
766		-|(% style="width:156px" %)AT+DR=?|(% style="width:147px" %)Get the Data Rate.|(% style="width:100px" %)5(((
	701	+(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
	702	+|=(% colspan="3" style="width: 463px;" %)AT+DR
	703	+|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
	704	+|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
767	767	OK
768	768	)))
769		-|(% style="width:156px" %)AT+DR=2|(% style="width:147px" %)Set the Data Rate.|(% style="width:100px" %)OK(((
	707	+|(% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((
770	770
771	771	)))
772	772
773		-(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
	711	+{{info}}
	712	+**Downlink Command: 0x2200aaFF**
	713	+{{/info}}
774	774
	715	+
775	775	If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
776	776
777		-* **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
	718	+* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
	719	+* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
778	778
779		-* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
780		-
781		-(% style="display:none" %) (%%)
782		-
783	783	== 7.5 Frame Counter Downlink ==
784	784
785		-
786	786	Feature: Get or Set the Frame Counter Downlink.
787	787
	725	+{{info}}
	726	+**AT Command:AT+FCD**
	727	+{{/info}}
788	788
789		-(% style="color:blue" %)**AT Command:  AT+FCD**
790		-
791		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:693.222px" %)
792		-|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:258px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:269px" %)**Response**
	729	+(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
	730	+|=(% colspan="3" style="width: 690px;" %)AT+FCD
	731	+|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
793	793	|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
794	794	OK
795	795	)))
796	796	|(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
797	797	OK
	737	+
	738	+
798	798	)))
799	799
800		-(% style="display:none" %) (%%)
801		-
802	802	== 7.6 Frame Counter Uplink ==
803	803
804	804	Feature: Get or Set the Frame Counter Uplink.
805	805
	745	+{{info}}
	746	+**AT Command:AT+FCU**
	747	+{{/info}}
806	806
807		-(% style="color:blue" %)**AT Command:  AT+FCU**
808		-
809		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:534.222px" %)
810		-|(% style="background-color:#4f81bd; color:white; width:177px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
	749	+(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
	750	+|=(% colspan="3" style="width: 531px;" %)AT+FCU
	751	+|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
811	811	|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
812	812	OK
813	813	)))
...	...	@@ -815,18 +815,17 @@
815	815
816	816	)))
817	817
818		-(% style="display:none" %) (%%)
819		-
820	820	== 7.7 Join Accept Delay1 ==
821	821
822		-
823	823	Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
824	824
	763	+{{info}}
	764	+**AT Command:AT+JN1DL**
	765	+{{/info}}
825	825
826		-(% style="color:blue" %)**AT Command:  AT+JN1DL**
827		-
828		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:537.222px" %)
829		-|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:229px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:140px" %)**Response**
	767	+(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
	768	+|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
	769	+|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
830	830	|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
831	831	OK
832	832	)))
...	...	@@ -834,18 +834,17 @@
834	834
835	835	)))
836	836
837		-(% style="display:none" %) (%%)
838		-
839	839	== 7.8 Join Accept Delay2 ==
840	840
841		-
842	842	Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
843	843
	781	+{{info}}
	782	+**AT Command:AT+JN2DL**
	783	+{{/info}}
844	844
845		-(% style="color:blue" %)**AT Command:  AT+JN2DL**
846		-
847		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:538.222px" %)
848		-|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:228px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:146px" %)**Response**
	785	+(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
	786	+|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
	787	+|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
849	849	|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
850	850	OK
851	851	)))
...	...	@@ -853,46 +853,37 @@
853	853
854	854	)))
855	855
856		-(% style="display:none" %) (%%)
857		-
858	858	== 7.9 Public Network Mode ==
859	859
	797	+Feature: Get or Set the public network mode. (0: off, 1: on)
860	860
861		-Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
	799	+{{info}}
	800	+**AT Command:AT+PNM**
	801	+{{/info}}
862	862
863		-(% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
864		-
865		-
866		-(% style="color:blue" %)**AT Command:  AT+PNM**
867		-
868		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:667.222px" %)
869		-|(% style="background-color:#4f81bd; color:white; width:166px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:225px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Response**
	803	+(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
	804	+|=(% colspan="3" style="width: 664px;" %)AT+PNM
	805	+|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
870	870	|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
871	871	OK
872	872	)))
873		-|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
874		-Set the public network mode.
875		-
876		-Set syncword=0x34
877		-)))|(% style="width:272px" %)(System will write new value to PNM)(((
	809	+|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
878	878	OK
879	879
880	880
881	881	)))
882		-|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
883	883
884		-(% style="display:none" %) (%%)
885		-
886	886	== 7.10 Receive Delay1 ==
887	887
888		-
889	889	Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
890	890
	819	+{{info}}
	820	+**AT Command:AT+RX1DL**
	821	+{{/info}}
891	891
892		-(% style="color:blue" %)**AT Command: AT+RX1DL**
893		-
894		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:408.222px" %)
895		-|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:122px" %)**Response**
	823	+(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
	824	+|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
	825	+|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
896	896	|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
897	897	OK
898	898	)))
...	...	@@ -900,18 +900,17 @@
900	900
901	901	)))
902	902
903		-(% style="display:none" %) (%%)
904		-
905	905	== 7.11 Receive Delay2 ==
906	906
907		-
908	908	Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
909	909
	837	+{{info}}
	838	+**AT Command:AT+RX2DL**
	839	+{{/info}}
910	910
911		-(% style="color:blue" %)**AT Command: AT+RX2DL**
912		-
913		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:481.222px" %)
914		-|(% style="background-color:#4f81bd; color:white; width:175px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:152px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:150px" %)**Response**
	841	+(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
	842	+|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
	843	+|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
915	915	|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
916	916	OK
917	917	)))
...	...	@@ -919,18 +919,17 @@
919	919
920	920	)))
921	921
922		-(% style="display:none" %) (%%)
923		-
924	924	== 7.12 Rx2 Window Data Rate ==
925	925
926		-
927	927	Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
928	928
	855	+{{info}}
	856	+**AT Command:AT+RX2DR**
	857	+{{/info}}
929	929
930		-(% style="color:blue" %)**AT Command:  AT+RX2DR**
931		-
932		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:525.222px" %)
933		-|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:232px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:130px" %)**Response**
	859	+(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
	860	+|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
	861	+|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
934	934	|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
935	935	OK
936	936	)))
...	...	@@ -938,18 +938,17 @@
938	938
939	939	)))
940	940
941		-(% style="display:none" %) (%%)
942		-
943	943	== 7.13 Rx2 Window Frequency ==
944	944
945		-
946	946	Feature: Get or Set the Rx2 window frequency
947	947
	873	+{{info}}
	874	+**AT Command:AT+RX2FQ**
	875	+{{/info}}
948	948
949		-(% style="color:blue" %)**AT Command:  AT+RX2FQ**
950		-
951		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:587.222px" %)
952		-|(% style="background-color:#4f81bd; color:white; width:183px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:240px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:160px" %)**Response**
	877	+(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
	878	+|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
	879	+|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
953	953	|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
954	954	OK
955	955	)))
...	...	@@ -957,20 +957,17 @@
957	957
958	958	)))
959	959
960		-(% style="display:none" %) (%%)
961		-
962	962	== 7.14 Transmit Power ==
963	963
	889	+Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
964	964
965		-Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dBm, 41 = 11dBm, …, 50 = 20dBm which is out of LoRaWAN spec. )
	891	+{{info}}
	892	+**AT Command:AT+TXP**
	893	+{{/info}}
966	966
967		-(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
968		-
969		-
970		-(% style="color:blue" %)**AT Command:  AT+TXP**
971		-
972		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:465.222px" %)
973		-|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:189px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:112px" %)**Response**
	895	+(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
	896	+|=(% colspan="3" style="width: 462px;" %)AT+TXP
	897	+|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
974	974	|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
975	975	OK
976	976	)))
...	...	@@ -982,98 +982,93 @@
982	982
983	983	If the downlink payload=22000100, it means setting the TXP to 0.
984	984
985		-* **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
	909	+* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
	910	+* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
986	986
987		-* **Example 2**: Downlink Payload: **22000000**  ~/~/ Set AT+TXP=0.
988		-
989		-(% style="display:none" %) (%%)
990		-
991	991	== 7.15 RSSI of the Last Received Packet ==
992	992
993		-
994	994	Feature: Get or Set the Rx2 window frequency
995	995
	916	+{{info}}
	917	+**AT Command:AT+RSSI**
	918	+{{/info}}
996	996
997		-(% style="color:blue" %)**AT Command:AT+RSSI**
998		-
999		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:557.222px" %)
1000		-|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:289px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
	920	+(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
	921	+|=(% colspan="3" style="width: 554px;" %)AT+RSSI
	922	+|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
1001	1001	|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
1002	1002	OK
1003	1003	)))
1004	1004
1005		-(% style="display:none" %) (%%)
1006		-
1007	1007	== 7.16 SNR of the Last Received Packet ==
1008	1008
1009		-
1010	1010	Feature: Get the SNR of the last received packet
1011	1011
	931	+{{info}}
	932	+**AT Command:AT+SNR**
	933	+{{/info}}
1012	1012
1013		-(% style="color:blue" %)**AT Command:  AT+SNR**
1014		-
1015		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:571.222px" %)
1016		-|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:290px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
	935	+(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
	936	+|=(% colspan="3" style="width: 568px;" %)AT+SNR
	937	+|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
1017	1017	|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
1018	1018	OK
1019	1019	)))
1020	1020
1021		-(% style="display:none" %) (%%)
1022		-
1023	1023	== 7.17 Application Port ==
1024	1024
1025		-
1026	1026	Feature: Get or set the application port.
1027	1027
	946	+{{info}}
	947	+**AT Command: AT+PORT**
	948	+{{/info}}
1028	1028
1029		-(% style="color:blue" %)**AT Command: AT+PORT**
1030		-
1031		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:459px" %)
1032		-|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
1033		-|(% style="width:157px" %)AT+PORT=?|(% style="width:193px" %)Get the application port|(% style="width:104px" %)21(((
	950	+(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
	951	+|=(% colspan="3" style="width: 497px;" %)AT+PORT
	952	+|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
	953	+|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
1034	1034	OK
1035	1035	)))
1036		-|(% style="width:157px" %)AT+PORT=21|(% style="width:193px" %)Set the application port|(% style="width:104px" %)OK
	956	+|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
1037	1037
1038		-(% style="color:blue" %)**Downlink Command: 0x23**
	958	+{{info}}
	959	+**Downlink Command: 0x23**
	960	+{{/info}}
1039	1039
1040	1040	Format: Command Code (0x23) followed by 1 bytes port value.
1041	1041
1042	1042	If the downlink payload=2301, it means set the application port to 1, while type code is 23.
1043	1043
1044		-* **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
	966	+* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
	967	+* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
1045	1045
1046		-* **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1047		-
1048		-(% style="display:none" %) (%%)
1049		-
1050	1050	== 7.18 Single Channel Mode ==
1051	1051
1052		-
1053	1053	Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
1054	1054
	973	+{{info}}
	974	+**AT Command: AT+CHS**
	975	+{{/info}}
1055	1055
1056		-(% style="color:blue" %)**AT Command: AT+CHS**
1057		-
1058		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:584px" %)
1059		-|(% style="background-color:#4f81bd; color:white; width:182px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
1060		-|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:101px" %)0(((
	977	+(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
	978	+|=(% colspan="3" style="width: 600px;" %)AT+CHS
	979	+|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
	980	+|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
1061	1061	OK
1062	1062	)))
1063		-|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:101px" %)OK
	983	+|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
1064	1064
1065		-(% style="display:none" %) (%%)
1066		-
1067	1067	== 7.19 Eight Channel Mode ==
1068	1068
1069		-
1070	1070	Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1071	1071
	989	+{{info}}
	990	+**AT Command: AT+CHE**
	991	+{{/info}}
1072	1072
1073		-(% style="color:blue" %)**AT Command: AT+CHE**
1074		-
1075		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:710.222px" %)
1076		-|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
	993	+(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
	994	+|=(% colspan="3" style="width: 707px;" %)AT+CHE
	995	+|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1077	1077	|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
1078	1078	902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
1079	1079
...	...	@@ -1081,37 +1081,35 @@
1081	1081	)))
1082	1082	|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1083	1083
1084		-(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
	1003	+{{info}}
	1004	+**Downlink Command: 0x24**
	1005	+{{/info}}
1085	1085
1086	1086	Format: Command Code (0x24) followed by 1 bytes channel value.
1087	1087
1088	1088	If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1089	1089
1090		-* **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
	1011	+* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
	1012	+* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
1091	1091
1092		-* **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1093		-
1094		-(% style="display:none" %) (%%)
1095		-
1096	1096	== 7.20 Get or Set RXwindows1 timeout ==
1097	1097
	1016	+Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1098	1098
1099		-Feature: Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
	1018	+{{info}}
	1019	+**AT Command: AT+RX1WTO**
	1020	+{{/info}}
1100	1100
1101		-
1102		-(% style="color:blue" %)**AT Command: AT+RX1WTO**
1103		-
1104		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:460.222px" %)
1105		-|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:201px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:93px" %)**Response**
	1022	+(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
	1023	+|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
	1024	+|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1106	1106	|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
1107	1107	OK
1108	1108	)))
1109	1109	|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1110	1110
1111		-(% style="display:none" %) (%%)
1112		-
1113	1113	(((
1114		-(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
	1031	+**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1115	1115	)))
1116	1116
1117	1117	[[image:image-20220526162535-1.png]]
...	...	@@ -1118,300 +1118,109 @@
1118	1118
1119	1119	(((
1120	1120	Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
	1038	+
	1039	+
1121	1121	)))
1122	1122
1123		-**Example:**
1124		-~1. Set AT+RX1WTO=0, AT+RX1DL=5000, the window opening time is: 53.699ms
1125		-
1126		-[[image:image-20240906095336-1.png||height="404" width="759"]]
1127		-
1128		-
1129		-2. Set AT+RX1WTO=128, AT+RX1DL=5000, the window opening time is: 149.644ms
1130		-
1131		-[[image:image-20240906095433-2.png||height="403" width="756"]]
1132		-
1133		-
1134		-3. Set AT+RX1WTO=128, AT+RX1DL=5000, the window opening time is: 298.221ms
1135		-
1136		-[[image:image-20240906095527-3.png||height="400" width="749"]]
1137		-
1138		-
1139	1139	== 7.21 Get or Set RXwindows2 timeout ==
1140	1140
	1044	+Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1141	1141
1142		-Feature: Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
	1046	+{{info}}
	1047	+**AT Command: AT+RX2WTO**
	1048	+{{/info}}
1143	1143
1144		-
1145		-(% style="color:blue" %)**AT Command: AT+RX2WTO**
1146		-
1147		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:448px" %)
1148		-|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:192px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:90px" %)**Response**
1149		-|(% style="width:162px" %)AT+RX2WTO=?|(% style="width:192px" %)Get RXwindows2 timeout|(% style="width:90px" %)7(((
	1050	+(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
	1051	+|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
	1052	+|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
	1053	+|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
1150	1150	OK
1151	1151	)))
1152		-|(% style="width:162px" %)AT+RX2WTO=20|(% style="width:192px" %)Set RXwindows2 timeout|(% style="width:90px" %)OK
	1056	+|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1153	1153
1154		-**Example:**
1155		-~1. Set AT+RX2WTO=0, AT+RX2DL=6000, the window opening time is: 48.435ms
1156		-
1157		-(% style="display:none" %) (%%) [[image:image-20240906095619-4.png||height="375" width="703"]]
1158		-
1159		-
1160		-2. Set AT+RX2WTO=128, AT+RX2DL=6000, the window opening time is: 3011ms
1161		-
1162		-[[image:image-20240906095726-5.png||height="381" width="714"]]
1163		-
1164		-
1165		-3. Set AT+RX2WTO=255, AT+RX2DL=6000, the window opening time is: 3009ms
1166		-
1167		-[[image:image-20240906095811-6.png||height="380" width="711"]]
1168		-
1169		-
1170	1170	== 7.22 Setting up uplinkdwelltime (as923, au915) ==
1171	1171
1172		-
1173	1173	Feature: Get or Set uplinkdwelltime
1174	1174
	1062	+{{info}}
	1063	+**AT Command: AT+DWELLT**
	1064	+{{/info}}
1175	1175
1176		-(% style="color:blue" %)**AT Command: AT+DWELLT**
1177		-
1178		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:419px" %)
1179		-|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:157px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:95px" %)**Response**
1180		-|(% style="width:162px" %)AT+DWELLT=?|(% style="width:157px" %)Get uplinkdwelltime|(% style="width:95px" %)1(((
	1066	+(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
	1067	+|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
	1068	+|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
	1069	+|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
1181	1181	OK
1182	1182	)))
1183		-|(% style="width:162px" %)AT+DWELLT=0|(% style="width:157px" %)Set uplinkdwelltime|(% style="width:95px" %)OK
	1072	+|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
1184	1184
1185		-(% style="color:blue" %)**Downlink Command: 0x25**
	1074	+{{info}}
	1075	+**Downlink Command: 0x25**
	1076	+{{/info}}
1186	1186
1187	1187	Format: Command Code (0x25) followed by 1 bytes state value.
1188	1188
1189	1189	If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1190	1190
1191		-* **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
	1082	+* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
	1083	+* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1192	1192
1193		-* **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1194		-
1195		-(% style="display:none" %) (%%)
1196		-
1197	1197	== 7.23 Set Packet Receiving Response Level ==
1198	1198
1199		-
1200	1200	Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1201	1201
	1089	+RPL value:
1202	1202
1203		-(% style="color:blue" %)**RPL value:**
1204		-
1205	1205	* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1206		-
1207	1207	* **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1208		-
1209	1209	* **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1210		-
1211	1211	* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1212		-
1213	1213	* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1214	1214
1215		-(% style="color:blue" %)**Case Analyes:**
	1097	+Case Analyes:
1216	1216
1217	1217	* For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1218		-
1219	1219	* For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1220		-
1221	1221	* For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1222	1222
1223		-(% style="color:blue" %)**AT Command: AT+RPL**
	1103	+{{info}}
	1104	+**AT Command: AT+RPL**
	1105	+{{/info}}
1224	1224
1225		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:536.222px" %)
1226		-|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:263px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:109px" %)**Response**
	1107	+(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
	1108	+|=(% colspan="3" style="width: 533px;" %)AT+RPL
	1109	+|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1227	1227	|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
1228	1228	OK
1229	1229	)))
1230	1230	|(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
1231	1231
1232		-(% style="color:blue" %)**Downlink Command: 0x21**
	1115	+{{info}}
	1116	+**Downlink Command: 0x21**
	1117	+{{/info}}
1233	1233
1234	1234	Format: Command Code (0x21) followed by 1 bytes level value.
1235	1235
1236	1236	If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1237	1237
1238		-* **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
	1123	+* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
	1124	+* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1239	1239
1240		-* **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1241		-
1242		-(% style="display:none" %) (%%)
1243		-
1244		-== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1245		-
1246		-
1247		-(% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1248		-
1249		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:589px" %)
1250		-|(% style="background-color:#4f81bd; color:white; width:227px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:300px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:87px" %)**Response**
1251		-|(% style="width:227px" %)AT+SETMAXNBTRANS=1，0|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1252		-OK
1253		-)))
1254		-|(% style="width:227px" %)AT+SETMAXNBTRANS=？，1|(% style="width:300px" %)(((
1255		-value2: 0: uplink fcnt doesn't change for each NBTrans;
1256		-
1257		-1: uplink fcnt increase by 1 for each NBTrans.
1258		-)))|(% style="width:87px" %)(((
1259		-1
1260		-
1261		-OK
1262		-)))
1263		-
1264		-(% style="color:blue" %)**Downlink Command: 0x33**
1265		-
1266		-Format: Command Code (0x33) followed by 2 bytes mode value.
1267		-
1268		-If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1269		-
1270		-* Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1271		-
1272		-* Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1273		-
1274		-(% style="display:none" %) (%%)
1275		-
1276		-== 7.25 Device offline rejoining （LWS007) ==
1277		-
1278		-
1279		-(% style="color:blue" %)**AT Command: AT+DDETECT**
1280		-
1281		-AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
1282		-
1283		-* ACK_Timout_1: Unit: min
1284		-
1285		-* ACK_Timout_2: Unit: min
1286		-
1287		-(% border="1" style="background-color:#f2f2f2; width:562px" %)
1288		-|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
1289		-|(% style="width:160px" %)(((
1290		-AT+DDETECT=1,1440,2880
1291		-
1292		-value1
1293		-)))|(% style="width:272px" %)Enable online detect|(% style="width:89px" %)(((
1294		-1
1295		-
1296		-OK
1297		-)))
1298		-|(% style="width:160px" %)(((
1299		-AT+DDETECT=1,?,2880
1300		-
1301		-value2
1302		-)))|(% style="width:272px" %)Online detection packet sending time|(% style="width:89px" %)(((
1303		-
1304		-
1305		-OK
1306		-)))
1307		-|(% style="width:160px" %)(((
1308		-AT+DDETECT=1,1440,？
1309		-
1310		-value3
1311		-)))|(% style="width:272px" %)Process rejoin|(% style="width:89px" %)(((
1312		-
1313		-
1314		-OK
1315		-)))
1316		-
1317		-(% style="color:blue" %)**Downlink Command: 0x32**
1318		-
1319		-Format: Command Code (0x32) followed by 2 bytes mode value.
1320		-
1321		-If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1322		-
1323		-* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1324		-
1325		-*
1326		-** 0x01** : Flag**
1327		-
1328		- **0x05A0 **: ACK_Timout_1 : 1440minutes (24 hours)
1329		-
1330		- **0x0B40 **: ACK_Timout_2 : 2880minutes (48 hours)
1331		-
1332		-* **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1333		-
1334		-(% style="display:none" %) (%%)
1335		-
1336		-== 7.26 Request the server to send an ACK ==
1337		-
1338		-
1339		-Feature: Mode for sending data for which acknowledgment was not received. LoraWAN Network Server(eg. The Things NetWork/ChirpStack/AWS/...).
1340		-
1341		-(% style="color:blue" %)**AT Command: AT+PNACKMD**
1342		-
1343		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:889px" %)
1344		-|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:627px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
1345		-|(% style="width:160px" %)AT+PNACKMD=1|(% style="width:627px" %)If the node uploads the ACK as confirm, it will request the LoraWAN Network Server to send an ACK. If the LoraWAN Network Server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:100px" %)1(((
1346		-OK
1347		-)))
1348		-|(% style="width:160px" %)AT+PNACKMD=0(Default)|(% style="width:627px" %)off request the LoraWAN Network Server to send an ACK|(% style="width:100px" %)(((
1349		-0
1350		-OK
1351		-)))
1352		-
1353		-(% style="display:none" %) (%%) (% style="color:blue" %)**Downlink Command: 0x34**
1354		-
1355		-0X34 01  ~/~/Same As AT+PNACKMD=1
1356		-
1357		-0x34 00  ~/~/Same As AT+PNACKMD=0
1358		-
1359		-
1360		-== 7.27 Adjust network rejoining interval ==
1361		-
1362		-
1363		-(% style="color:blue" %)**AT Command: AT+RJTDC**
1364		-
1365		-(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:889px" %)
1366		-|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:357px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
1367		-|(% style="width:165px" %)AT+RJTDC=?|(% style="width:357px" %)Show the ReJoin data transmission interval in min|(% style="width:361px" %)(((
1368		-20 (Default)
1369		-
1370		-
1371		-(((
1372		-OK
1373		-
1374		-the interval is 20 min
1375		-)))
1376		-)))
1377		-|(% style="width:165px" %)AT+RJTDC=60|(% style="width:357px" %)Set the ReJoin data transmission interval in min|(% style="width:361px" %)OK(((
1378		-Set the ReJoin data transmission interval to 60 min
1379		-)))
1380		-
1381		-(% style="color:blue" %)**Downlink Command: 0x26**
1382		-
1383		-Format: Command Code (0x26) followed by 2 bytes mode value.
1384		-
1385		-If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1386		-
1387		-* **Example 1:** Downlink Payload: 26000A  ~/~/  Set AT+RJTDC=10
1388		-
1389		-* **Example 2: **Downlink Payload: 260002  ~/~/  Set AT+RJTDC=2
1390		-
1391		-(% style="display:none" %) (%%)
1392		-
1393	1393	= 8. AT Commands Combination =
1394	1394
1395	1395	== 8.1 Set a fix RX2DR for downlink window ==
1396	1396
	1130	+* **AT+ADR=0 **~-~-> Disable ADR first
	1131	+* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
1397	1397
1398		-* (% style="color:blue" %)**AT+ADR=0             **(%%) **~/~/**  Disable ADR first
1399		-
1400		-* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~/~/**  Set xxxx to your wanted DataRate
1401		-
1402		-(% style="display:none" %) (%%)
1403		-
1404	1404	== 8.2 Use Downlink Command to set a fix uplink DR ==
1405	1405
	1135	+{{info}}
	1136	+**Downlink Command: 0x22000500**
	1137	+{{/info}}
1406	1406
1407		-(% style="color:blue" %)**Downlink Command: 0x22000500**
	1139	+Same as:
1408	1408
1409		-**Same as:**
1410		-
1411		-* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1412		-
1413		-* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1414		-
1415		-* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1416		-
1417		-
	1141	+* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
	1142	+* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
	1143	+* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]

image-20240906095336-1.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.kai

Size

...	...	@@ -1,1 +1,0 @@
1		-111.0 KB

Content

image-20240906095433-2.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.kai

Size

...	...	@@ -1,1 +1,0 @@
1		-113.2 KB

Content

image-20240906095527-3.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.kai

Size

...	...	@@ -1,1 +1,0 @@
1		-111.6 KB

Content

image-20240906095619-4.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.kai

Size

...	...	@@ -1,1 +1,0 @@
1		-112.4 KB

Content

image-20240906095726-5.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.kai

Size

...	...	@@ -1,1 +1,0 @@
1		-114.0 KB

Content

image-20240906095811-6.png

Author

...	...	@@ -1,1 +1,0 @@
1		-XWiki.kai

Size

...	...	@@ -1,1 +1,0 @@
1		-112.8 KB

Content