Skip to Content
Last modified by Mengting Qiu on 2025/07/08 16:32
From version 81.1
edited by Mengting Qiu
on 2025/07/01 15:11
Change comment: There is no comment for this version
To version 60.4
edited by Xiaoling
on 2023/03/27 13:59
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.ting
1 +XWiki.Xiaoling
Content
... ... @@ -10,7 +10,6 @@
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 12  * (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 -
14 14  * (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
15 15  
16 16  (((
... ... @@ -18,13 +18,10 @@
18 18  )))
19 19  
20 20  
21 -
22 -
23 23  = 2. How to use AT Commands or Downlink command =
24 24  
25 25  
26 -* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of **[[Dragino Products User Manual>>http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20LoRaWAN%20End%20Nodes/]]**.
27 -
23 +* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
28 28  * **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
29 29  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
30 30  ** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
... ... @@ -35,11 +35,18 @@
35 35  = 3. Support End Node and firmware version =
36 36  
37 37  
34 +(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
35 +|=(% colspan="3" style="width: 963px;" %)(((
38 38  Dragino STM32 base hardware Firmware / LoRaWAN stack list
39 -
40 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:966px" %)
41 -|(% style="background-color:#4f81bd; color:white; width:187px" %)**Model**|(% style="background-color:#4f81bd; color:white; width:330px" %)**Description**|(% style="background-color:#4f81bd; color:white; width:445px" %)**Firmware Version <~-~-> Stack Version**
37 +)))
42 42  |(% style="width:187px" %)(((
39 +**Model**
40 +)))|(% style="width:330px" %)(((
41 +**Description**
42 +)))|(% style="width:445px" %)(((
43 +**Firmware Version <~-~-> Stack Version**
44 +)))
45 +|(% style="width:187px" %)(((
43 43  [[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
44 44  )))|(% style="width:330px" %)(((
45 45  Open Source Generic LoRaWAN Sensor Node
... ... @@ -111,8 +111,9 @@
111 111  
112 112  (% style="color:blue" %)**AT Command: AT+TDC**
113 113  
114 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:727.222px" %)
115 -|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:329px" %)**Response**
117 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
118 +|=(% colspan="3" style="width: 724px;" %)AT+TDC
119 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
116 116  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
117 117  OK
118 118  
... ... @@ -123,6 +123,8 @@
123 123  )))
124 124  
125 125  (((
130 +
131 +
126 126  (% style="color:blue" %)**Downlink Command: 0x01**
127 127  
128 128  Format: Command Code (0x01) followed by 3 bytes time value.
... ... @@ -133,7 +133,6 @@
133 133  )))
134 134  
135 135  * **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
136 -
137 137  * **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
138 138  
139 139  (% style="display:none" %) (%%)
... ... @@ -144,10 +144,11 @@
144 144  Feature: Reboot End Node to perform a new OTAA or ABP Join.
145 145  
146 146  
147 -(% style="color:blue" %)**AT Command: ATZ  ~/~/ **(%%)Trig a reset of the MCU
152 +(% style="color:blue" %)**AT Command: ATZ**
148 148  
149 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:546px" %)
150 -|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:92px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:294px" %)**Response**
154 +(% border="1" style="background-color:#ffffcc; color:green; width:546px" %)
155 +|=(% colspan="3" style="width: 543px;" %)ATZ: Trig a reset of the MCU
156 +|(% style="width:157px" %)**Command Example**|(% style="width:92px" %)**Function**|(% style="width:294px" %)**Response**
151 151  |(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
152 152  Device reset and show booting info
153 153  
... ... @@ -179,10 +179,11 @@
179 179  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
180 180  
181 181  
182 -(% style="color:blue" %)**AT Command: AT+FDR  ~/~/  **(%%)Reset to factory default
188 +(% style="color:blue" %)**AT Command: AT+FDR**
183 183  
184 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:789px" %)
185 -|(% style="background-color:#4f81bd; color:white; width:154px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:175px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:456px" %)**Response**
190 +(% border="1" style="background-color:#ffffcc; color:green; width:789px" %)
191 +|=(% colspan="3" style="width: 786px;" %)Reset to factory default
192 +|(% style="width:154px" %)**Command Example**|(% style="width:175px" %)**Function**|(% style="width:456px" %)**Response**
186 186  |(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
187 187  Device reset to factory default parameters and show booting info
188 188  
... ... @@ -214,10 +214,11 @@
214 214  Feature: Show firmware version. No downlink command yet.
215 215  
216 216  
217 -(% style="color:blue" %)**AT Command: AT+VER  ~/~/   **(%%)Image Version and Frequency Band
224 +(% style="color:blue" %)**AT Command: AT+VER**
218 218  
219 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:542px" %)
220 -|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:86px" %)**Response**
226 +(% border="1" style="background-color:#ffffcc; color:green; width:542px" %)
227 +|=(% colspan="3" style="width: 539px;" %)AT+VER: Image Version and Frequency Band
228 +|(% style="width:157px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:86px" %)**Response**
221 221  |(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
222 222  1.3 EU868
223 223  
... ... @@ -227,17 +227,17 @@
227 227  (% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
228 228  
229 229  (((
230 -Format: Command Code (0x26) followed by 1 byte.
238 +Downlink Format: 0x26
231 231  )))
232 232  
233 233  (((
234 -If the downlink payload=**2601, **Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes(  FPort= 5 usually).
242 +Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
235 235  )))
236 236  
237 237  (((
238 238  
239 239  
240 -(% style="color:#037691" %)**xx: Software Type:**
248 +**xx: Software Type:**
241 241  )))
242 242  
243 243  * 0x00 01: LGT92 Version
... ... @@ -247,7 +247,7 @@
247 247  (((
248 248  
249 249  
250 -(% style="color:#037691" %)**yy: Frequency Band:**
258 +**yy: Frequency Band:**
251 251  )))
252 252  
253 253  * 0x01: EU868
... ... @@ -257,14 +257,14 @@
257 257  * 0x05: KZ865
258 258  * 0x06: RU864
259 259  * 0x07: AS923
260 -* 0x08: AS923-2
261 -* 0x09: AS923-3
262 -* 0xa0: AS923-4
268 +* 0x08: AS923-1
269 +* 0x09: AS923-2
270 +* 0xa0: AS923-3
263 263  
264 264  (((
265 265  
266 266  
267 -(% style="color:#037691" %)**zz: Subband**
275 +**zz: Subband**
268 268  )))
269 269  
270 270  firmware version: v1.1.0 ~-~-> 110
... ... @@ -276,65 +276,25 @@
276 276  Feature: Show All configure. No downlink command yet.
277 277  
278 278  
279 -(% style="color:blue" %)**AT Command: AT+CFG  ~/~/ **(%%)Print all configurations
287 +(% style="color:blue" %)**AT Command: AT+CFG**
280 280  
281 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:599.222px" %)
282 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:154px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:280px" %)**Response**
289 +(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
290 +|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
291 +|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
283 283  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
284 284  AT+DEUI = XX XX XX XX XX XX XX XX
294 +
285 285  AT+DADDR=XXXXXXXX
296 +
286 286  ……….
298 +
287 287  AT+RX2WTO=X
300 +
288 288  AT+CHS=868100000
289 -OK
290 -)))
291 291  
292 -(% style="display:none" %) (%%)
293 -
294 -== 4.6 Get or Set time synchronization method ==
295 -
296 -
297 -Feature: Set the system time synchronization.
298 -
299 -(% style="color:blue" %)**AT Command: AT+SYNCMOD**
300 -
301 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:727.222px" %)
302 -|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:329px" %)**Response**
303 -|(% style="width:165px" %)AT+SYNCMOD=?|(% style="width:227px" %)Show curren|(% style="width:329px" %)(((
304 -AT+SYNCMOD=?
305 -
306 -1,0
307 -
308 -(((
309 309  OK
310 310  )))
311 -)))
312 -|(% style="width:165px" %)AT+TDC=60000|(% style="width:227px" %)Set Transmit Interval|(% style="width:329px" %)OK(((
313 -Set transmit interval to 60000ms = 60 seconds
314 -)))
315 315  
316 - AT+SYNCMOD=1,bb 
317 -
318 -* (((
319 -1: Set the system time synchronization
320 -)))
321 -
322 - bb:  Set local time (24 zones): -12~~12
323 -
324 -* (((
325 -Example: AT+SYNCMOD=1,8  ~/~/Set the time to UTC+8 time display.
326 -)))
327 -* (((
328 -Downlink payload：28 01 xx
329 -
330 -Example:  downlink 0x280108 ~-~-~-~-->AT+SYNCMOD=1,8
331 -)))
332 -
333 -Note: This command takes effect after the node is reset, or after downlink 0x2601(query device status).
334 -
335 -
336 -
337 -
338 338  = 5. Keys, IDs and EUIs management =
339 339  
340 340  == 5.1 Application EUI ==
... ... @@ -345,12 +345,13 @@
345 345  
346 346  (% style="color:blue" %)**AT Command: AT+APPEUI**
347 347  
348 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:643px" %)
349 -|(% style="background-color:#4f81bd; color:white; width:272px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:182px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:184px" %)**Response**
350 -|(% style="width:272px" %)AT+APPEUI=?|(% style="width:182px" %)Get the Application EUI|(% style="width:184px" %)00 b3 d5 00 00 00 00 00(((
316 +(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
317 +|=(% colspan="3" style="width: 683px;" %)AT+APPEUI
318 +|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
319 +|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
351 351  OK
352 352  )))
353 -|(% style="width:272px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:182px" %)Set the Application EUI|(% style="width:184px" %)OK
322 +|(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
354 354  
355 355  (% style="display:none" %) (%%)
356 356  
... ... @@ -362,8 +362,9 @@
362 362  
363 363  (% style="color:blue" %)**AT Command: AT+APPKEY**
364 364  
365 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:976.222px" %)
366 -|(% style="background-color:#4f81bd; color:white; width:441px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:180px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:350px" %)**Response**
334 +(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
335 +|=(% colspan="3" style="width: 973px;" %)AT+APPKEY
336 +|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
367 367  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
368 368  OK
369 369  )))
... ... @@ -379,8 +379,9 @@
379 379  
380 380  (% style="color:blue" %)**AT Command: AT+APPSKEY**
381 381  
382 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1040.22px" %)
383 -|(% style="background-color:#4f81bd; color:white; width:451px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:231px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:354px" %)**Response**
352 +(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
353 +|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
354 +|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
384 384  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
385 385  OK
386 386  )))
... ... @@ -398,8 +398,9 @@
398 398  
399 399  (% style="color:blue" %)**AT Command: AT+DADDR**
400 400  
401 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:795.222px" %)
402 -|(% style="background-color:#4f81bd; color:white; width:192px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:241px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:359px" %)**Response**
372 +(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
373 +|=(% colspan="3" style="width: 792px;" %)AT+DADDR
374 +|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
403 403  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
404 404  A8 40 41 FF
405 405  
... ... @@ -417,8 +417,9 @@
417 417  
418 418  (% style="color:blue" %)**AT Command: AT+DEUI**
419 419  
420 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1035.22px" %)
421 -|(% style="background-color:#4f81bd; color:white; width:250px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:634px" %)**Response**
392 +(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
393 +|=(% colspan="3" style="width: 1032px;" %)AT+DEUI
394 +|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
422 422  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
423 423  OK
424 424  )))
... ... @@ -436,8 +436,9 @@
436 436  
437 437  (% style="color:blue" %)**AT Command: AT+NWKID**
438 438  
439 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:448.222px" %)
440 -|(% style="background-color:#4f81bd; color:white; width:191px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:153px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
412 +(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
413 +|=(% colspan="3" style="width: 445px;" %)AT+NWKID
414 +|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
441 441  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
442 442  OK
443 443  )))
... ... @@ -453,8 +453,9 @@
453 453  
454 454  (% style="color:blue" %)**AT Command: AT+NWKSKEY**
455 455  
456 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1017.22px" %)
457 -|(% style="background-color:#4f81bd; color:white; width:455px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:215px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:343px" %)**Response**
430 +(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
431 +|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
432 +|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
458 458  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
459 459  OK
460 460  )))
... ... @@ -474,8 +474,9 @@
474 474  
475 475  (% style="color:blue" %)**AT Command: AT+CFM**
476 476  
477 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:710.222px" %)
478 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:205px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:346px" %)**Response**
452 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
453 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
454 +|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
479 479  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
480 480  OK
481 481  )))
... ... @@ -484,12 +484,11 @@
484 484  
485 485  (% style="color:blue" %)**Downlink Command: 0x05**
486 486  
487 -Format: Command Code (0x05) followed by 1 byte mode value.
463 +Format: Command Code (0x05) followed by 2 bytes mode value.
488 488  
489 489  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
490 490  
491 491  * **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
492 -
493 493  * **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
494 494  
495 495  (% style="display:none" %) (%%)
... ... @@ -499,13 +499,14 @@
499 499  
500 500  (% style="color:blue" %)**AT Command: AT+CFM**
501 501  
502 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:462px" %)
503 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
477 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
478 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
479 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
504 504  |(% style="width:160px" %)(((
505 505  AT+CFM=1,0,0
506 506  
507 507  value1
508 -)))|(% style="width:198px" %)confirmed uplink|(% style="width:100px" %)(((
484 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
509 509  1
510 510  
511 511  OK
... ... @@ -514,7 +514,7 @@
514 514  AT+CFM=0,?,0
515 515  
516 516  value2
517 -)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:100px" %)(((
493 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
518 518  0~~7
519 519  
520 520  OK
... ... @@ -523,7 +523,7 @@
523 523  AT+CFM=0,0,1
524 524  
525 525  value3
526 -)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:100px" %)(((
502 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
527 527  1
528 528  
529 529  OK
... ... @@ -531,12 +531,11 @@
531 531  
532 532  (% style="color:blue" %)**Downlink Command: 0x05**
533 533  
534 -Format: Command Code (0x05) followed by 3 bytes mode value.
510 +Format: Command Code (0x05) followed by 2 bytes mode value.
535 535  
536 536  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
537 537  
538 538  * **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
539 -
540 540  * **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
541 541  
542 542  (% style="display:none" %) (%%)
... ... @@ -549,14 +549,13 @@
549 549  
550 550  (% style="color:blue" %)**AT Command: AT+CFS**
551 551  
552 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:463px" %)
553 -|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
527 +(% border="1" style="background-color:#ffffcc; color:green; width:463px" %)
528 +|=(% colspan="3" style="width: 460px;" %)AT+CFS
529 +|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:107px" %)**Response**
554 554  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
555 555  OK
556 556  )))
557 557  
558 -(% style="display:none" %) (%%)
559 -
560 560  == 6.3 Join LoRa® Network ==
561 561  
562 562  
... ... @@ -565,15 +565,15 @@
565 565  
566 566  (% style="color:blue" %)**AT Command: AT+JOIN**
567 567  
568 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:647.222px" %)
569 -|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:334px" %)**Response**
542 +(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
543 +|=(% colspan="3" style="width: 644px;" %)AT+JOIN
544 +|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
570 570  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
571 571  OK
547 +
572 572  While Error in format, return AT_BUSY_ERROR
573 573  )))
574 574  
575 -(% style="display:none" %) (%%)
576 -
577 577  == 6.4 LoRa® Network Join Mode ==
578 578  
579 579  
... ... @@ -582,8 +582,9 @@
582 582  
583 583  (% style="color:blue" %)**AT Command: AT+NJM**
584 584  
585 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:753.222px" %)
586 -|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
559 +(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
560 +|=(% colspan="3" style="width: 750px;" %)AT+NJM
561 +|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
587 587  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
588 588  OK
589 589  )))
... ... @@ -597,7 +597,6 @@
597 597  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
598 598  
599 599  * **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
600 -
601 601  * **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
602 602  
603 603  (% style="display:none" %) (%%)
... ... @@ -610,9 +610,10 @@
610 610  
611 611  (% style="color:blue" %)**AT Command: AT+NJS**
612 612  
613 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:435px" %)
614 -|(% style="background-color:#4f81bd; color:white; width:169px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:164px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:97px" %)**Response**
615 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:97px" %)0(((
587 +(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
588 +|=(% colspan="3" style="width: 495px;" %)AT+NJS
589 +|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
590 +|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
616 616  OK
617 617  )))
618 618  
... ... @@ -626,9 +626,10 @@
626 626  
627 627  (% style="color:blue" %)**AT Command: AT+RECV**
628 628  
629 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:543px" %)
630 -|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
631 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:104px" %)0:(((
604 +(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
605 +|=(% colspan="3" style="width: 584px;" %)AT+RECV
606 +|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
607 +|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
632 632  OK
633 633  )))
634 634  
... ... @@ -642,8 +642,9 @@
642 642  
643 643  (% style="color:blue" %)**AT Command: AT+RECVB**
644 644  
645 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:793.222px" %)
646 -|(% style="background-color:#4f81bd; color:white; width:173px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:497px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:120px" %)**Response**
621 +(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
622 +|=(% colspan="3" style="width: 790px;" %)AT+RECVB
623 +|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
647 647  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
648 648  OK
649 649  )))
... ... @@ -650,7 +650,7 @@
650 650  
651 651  (% style="display:none" %) (%%)
652 652  
653 -== 6.8 Send Text Data（Note: The format of this command of LA66 is subject to the manual） ==
630 +== 6.8 Send Text Data ==
654 654  
655 655  
656 656  Feature: Send Text Data<port:data>.
... ... @@ -658,8 +658,9 @@
658 658  
659 659  (% style="color:blue" %)**AT Command: AT+SEND**
660 660  
661 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:991.222px" %)
662 -|(% style="background-color:#4f81bd; color:white; width:201px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:340px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:446px" %)**Response**
638 +(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
639 +|=(% colspan="3" style="width: 988px;" %)AT+SEND
640 +|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
663 663  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
664 664  While Error in format, return
665 665  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
... ... @@ -667,7 +667,7 @@
667 667  
668 668  (% style="display:none" %) (%%)
669 669  
670 -== 6.9 Send Hexadecimal Data（Note: The format of this command of LA66 is subject to the manual） ==
648 +== 6.9 Send Hexadecimal Data ==
671 671  
672 672  
673 673  Feature: Send hexadecimal data along with the application port.
... ... @@ -675,10 +675,11 @@
675 675  
676 676  (% style="color:blue" %)**AT Command: AT+SENDB**
677 677  
678 -(% border="1" cellspacing="4" style="width:974px" %)
679 -|(% style="background-color:#4f81bd; color:white; width:257px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:394px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:318px" %)**Response**
680 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)OK
681 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)While Error in format, return(((
656 +(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
657 +|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
658 +|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
659 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
660 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
682 682  AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
683 683  )))
684 684  
... ... @@ -694,13 +694,14 @@
694 694  
695 695  (% style="color:blue" %)**AT Command: AT+ADR**
696 696  
697 -(% border="1" cellspacing="4" style="width:643px" %)
698 -|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:266px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:209px" %)**Response**
699 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:209px" %)1(((
676 +(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
677 +|=(% colspan="3" style="width: 680px;" %)AT+ADR
678 +|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
679 +|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
700 700  OK
701 701  )))
702 -|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)OK
703 -|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)While Error in format, return(((
682 +|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK
683 +|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((
704 704  AT_PARAM_ERROR
705 705  )))
706 706  
... ... @@ -709,7 +709,6 @@
709 709  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
710 710  
711 711  * **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
712 -
713 713  * **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
714 714  
715 715  (% style="display:none" %) (%%)
... ... @@ -722,37 +722,32 @@
722 722  
723 723  (% style="color:blue" %)**AT Command:  AT+CLASS**
724 724  
725 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:428px" %)
726 -|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:166px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:94px" %)**Response**
727 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:94px" %)A(((
704 +(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
705 +|=(% colspan="3" style="width: 504px;" %)AT+CLASS
706 +|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
707 +|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
728 728  OK
729 729  )))
730 -|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:94px" %)OK(((
731 -
710 +|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((
732 732  )))
733 733  
734 -(% style="display:none" %)
713 +(% style="display:none" %) (%%)
735 735  
736 -(% style="color:red" %)**Notice:**
737 -
738 -* Run AT+FDR before running AT+CLASS=C
739 -* After change to Class=C, Before OTAA Join Successfule, the end node will still shows to use CLASS=A for OTAA Joined. It will use CLASS=C after OTAA Join Succeccful.
740 -
741 741  == 7.3 Duty Cycle Setting ==
742 742  
743 743  
744 -Feature: Get or Set the ETSI Duty Cycle setting** : 0**=disable, **1**=enable - Only for testing.
718 +Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
745 745  
746 746  
747 747  (% style="color:blue" %)**AT Command:  AT+DCS**
748 748  
749 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515.222px" %)
750 -|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
723 +(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
724 +|=(% colspan="3" style="width: 512px;" %)AT+DCS
725 +|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
751 751  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
752 752  OK
753 753  )))
754 754  |(% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((
755 -
756 756  )))
757 757  
758 758  (% style="display:none" %) (%%)
... ... @@ -766,17 +766,17 @@
766 766  **Notice:**
767 767  
768 768  * User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
769 -
770 770  * Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
771 771  
772 772  (% style="color:blue" %)**AT Command: AT+DR**
773 773  
774 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:409px" %)
775 -|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
776 -|(% style="width:156px" %)AT+DR=?|(% style="width:147px" %)Get the Data Rate.|(% style="width:100px" %)5(((
747 +(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
748 +|=(% colspan="3" style="width: 463px;" %)AT+DR
749 +|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
750 +|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
777 777  OK
778 778  )))
779 -|(% style="width:156px" %)AT+DR=2|(% style="width:147px" %)Set the Data Rate.|(% style="width:100px" %)OK(((
753 +|(% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((
780 780  
781 781  )))
782 782  
... ... @@ -785,7 +785,6 @@
785 785  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
786 786  
787 787  * **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
788 -
789 789  * **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
790 790  
791 791  (% style="display:none" %) (%%)
... ... @@ -798,8 +798,9 @@
798 798  
799 799  (% style="color:blue" %)**AT Command:  AT+FCD**
800 800  
801 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:693.222px" %)
802 -|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:258px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:269px" %)**Response**
774 +(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
775 +|=(% colspan="3" style="width: 690px;" %)AT+FCD
776 +|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
803 803  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
804 804  OK
805 805  )))
... ... @@ -807,8 +807,6 @@
807 807  OK
808 808  )))
809 809  
810 -(% style="display:none" %) (%%)
811 -
812 812  == 7.6 Frame Counter Uplink ==
813 813  
814 814  Feature: Get or Set the Frame Counter Uplink.
... ... @@ -816,8 +816,9 @@
816 816  
817 817  (% style="color:blue" %)**AT Command:  AT+FCU**
818 818  
819 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:534.222px" %)
820 -|(% style="background-color:#4f81bd; color:white; width:177px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
791 +(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
792 +|=(% colspan="3" style="width: 531px;" %)AT+FCU
793 +|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
821 821  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
822 822  OK
823 823  )))
... ... @@ -825,8 +825,6 @@
825 825  
826 826  )))
827 827  
828 -(% style="display:none" %) (%%)
829 -
830 830  == 7.7 Join Accept Delay1 ==
831 831  
832 832  
... ... @@ -835,8 +835,9 @@
835 835  
836 836  (% style="color:blue" %)**AT Command:  AT+JN1DL**
837 837  
838 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:537.222px" %)
839 -|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:229px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:140px" %)**Response**
809 +(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
810 +|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
811 +|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
840 840  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
841 841  OK
842 842  )))
... ... @@ -844,8 +844,6 @@
844 844  
845 845  )))
846 846  
847 -(% style="display:none" %) (%%)
848 -
849 849  == 7.8 Join Accept Delay2 ==
850 850  
851 851  
... ... @@ -854,8 +854,9 @@
854 854  
855 855  (% style="color:blue" %)**AT Command:  AT+JN2DL**
856 856  
857 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:538.222px" %)
858 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:228px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:146px" %)**Response**
827 +(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
828 +|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
829 +|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
859 859  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
860 860  OK
861 861  )))
... ... @@ -863,8 +863,6 @@
863 863  
864 864  )))
865 865  
866 -(% style="display:none" %) (%%)
867 -
868 868  == 7.9 Public Network Mode ==
869 869  
870 870  
... ... @@ -875,8 +875,9 @@
875 875  
876 876  (% style="color:blue" %)**AT Command:  AT+PNM**
877 877  
878 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:667.222px" %)
879 -|(% style="background-color:#4f81bd; color:white; width:166px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:225px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Response**
847 +(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
848 +|=(% colspan="3" style="width: 664px;" %)AT+PNM
849 +|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
880 880  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
881 881  OK
882 882  )))
... ... @@ -891,8 +891,6 @@
891 891  )))
892 892  |(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
893 893  
894 -(% style="display:none" %) (%%)
895 -
896 896  == 7.10 Receive Delay1 ==
897 897  
898 898  
... ... @@ -901,8 +901,9 @@
901 901  
902 902  (% style="color:blue" %)**AT Command: AT+RX1DL**
903 903  
904 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:408.222px" %)
905 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:122px" %)**Response**
872 +(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
873 +|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
874 +|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
906 906  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
907 907  OK
908 908  )))
... ... @@ -910,8 +910,6 @@
910 910  
911 911  )))
912 912  
913 -(% style="display:none" %) (%%)
914 -
915 915  == 7.11 Receive Delay2 ==
916 916  
917 917  
... ... @@ -920,8 +920,9 @@
920 920  
921 921  (% style="color:blue" %)**AT Command: AT+RX2DL**
922 922  
923 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:481.222px" %)
924 -|(% style="background-color:#4f81bd; color:white; width:175px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:152px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:150px" %)**Response**
890 +(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
891 +|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
892 +|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
925 925  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
926 926  OK
927 927  )))
... ... @@ -929,8 +929,6 @@
929 929  
930 930  )))
931 931  
932 -(% style="display:none" %) (%%)
933 -
934 934  == 7.12 Rx2 Window Data Rate ==
935 935  
936 936  
... ... @@ -939,8 +939,9 @@
939 939  
940 940  (% style="color:blue" %)**AT Command:  AT+RX2DR**
941 941  
942 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:525.222px" %)
943 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:232px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:130px" %)**Response**
908 +(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
909 +|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
910 +|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
944 944  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
945 945  OK
946 946  )))
... ... @@ -948,8 +948,6 @@
948 948  
949 949  )))
950 950  
951 -(% style="display:none" %) (%%)
952 -
953 953  == 7.13 Rx2 Window Frequency ==
954 954  
955 955  
... ... @@ -958,8 +958,9 @@
958 958  
959 959  (% style="color:blue" %)**AT Command:  AT+RX2FQ**
960 960  
961 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:587.222px" %)
962 -|(% style="background-color:#4f81bd; color:white; width:183px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:240px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:160px" %)**Response**
926 +(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
927 +|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
928 +|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
963 963  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
964 964  OK
965 965  )))
... ... @@ -967,12 +967,10 @@
967 967  
968 968  )))
969 969  
970 -(% style="display:none" %) (%%)
971 -
972 972  == 7.14 Transmit Power ==
973 973  
974 974  
975 -Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dBm, 41 = 11dBm, …, 50 = 20dBm which is out of LoRaWAN spec. )
939 +Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
976 976  
977 977  (% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
978 978  
... ... @@ -979,8 +979,9 @@
979 979  
980 980  (% style="color:blue" %)**AT Command:  AT+TXP**
981 981  
982 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:465.222px" %)
983 -|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:189px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:112px" %)**Response**
946 +(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
947 +|=(% colspan="3" style="width: 462px;" %)AT+TXP
948 +|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
984 984  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
985 985  OK
986 986  )))
... ... @@ -993,11 +993,8 @@
993 993  If the downlink payload=22000100, it means setting the TXP to 0.
994 994  
995 995  * **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
961 +* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+TXP=0.
996 996  
997 -* **Example 2**: Downlink Payload: **22000000**  ~/~/ Set AT+TXP=0.
998 -
999 -(% style="display:none" %) (%%)
1000 -
1001 1001  == 7.15 RSSI of the Last Received Packet ==
1002 1002  
1003 1003  
... ... @@ -1006,14 +1006,13 @@
1006 1006  
1007 1007  (% style="color:blue" %)**AT Command:AT+RSSI**
1008 1008  
1009 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:557.222px" %)
1010 -|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:289px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
971 +(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
972 +|=(% colspan="3" style="width: 554px;" %)AT+RSSI
973 +|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
1011 1011  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
1012 1012  OK
1013 1013  )))
1014 1014  
1015 -(% style="display:none" %) (%%)
1016 -
1017 1017  == 7.16 SNR of the Last Received Packet ==
1018 1018  
1019 1019  
... ... @@ -1022,14 +1022,13 @@
1022 1022  
1023 1023  (% style="color:blue" %)**AT Command:  AT+SNR**
1024 1024  
1025 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:571.222px" %)
1026 -|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:290px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
986 +(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
987 +|=(% colspan="3" style="width: 568px;" %)AT+SNR
988 +|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
1027 1027  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
1028 1028  OK
1029 1029  )))
1030 1030  
1031 -(% style="display:none" %) (%%)
1032 -
1033 1033  == 7.17 Application Port ==
1034 1034  
1035 1035  
... ... @@ -1038,12 +1038,13 @@
1038 1038  
1039 1039  (% style="color:blue" %)**AT Command: AT+PORT**
1040 1040  
1041 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:459px" %)
1042 -|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
1043 -|(% style="width:157px" %)AT+PORT=?|(% style="width:193px" %)Get the application port|(% style="width:104px" %)21(((
1001 +(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
1002 +|=(% colspan="3" style="width: 497px;" %)AT+PORT
1003 +|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
1004 +|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
1044 1044  OK
1045 1045  )))
1046 -|(% style="width:157px" %)AT+PORT=21|(% style="width:193px" %)Set the application port|(% style="width:104px" %)OK
1007 +|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
1047 1047  
1048 1048  (% style="color:blue" %)**Downlink Command: 0x23**
1049 1049  
... ... @@ -1052,11 +1052,8 @@
1052 1052  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
1053 1053  
1054 1054  * **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1055 -
1056 1056  * **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1057 1057  
1058 -(% style="display:none" %) (%%)
1059 -
1060 1060  == 7.18 Single Channel Mode ==
1061 1061  
1062 1062  
... ... @@ -1065,15 +1065,14 @@
1065 1065  
1066 1066  (% style="color:blue" %)**AT Command: AT+CHS**
1067 1067  
1068 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:584px" %)
1069 -|(% style="background-color:#4f81bd; color:white; width:182px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
1070 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:101px" %)0(((
1026 +(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
1027 +|=(% colspan="3" style="width: 600px;" %)AT+CHS
1028 +|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
1029 +|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
1071 1071  OK
1072 1072  )))
1073 -|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:101px" %)OK
1032 +|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
1074 1074  
1075 -(% style="display:none" %) (%%)
1076 -
1077 1077  == 7.19 Eight Channel Mode ==
1078 1078  
1079 1079  
... ... @@ -1082,8 +1082,9 @@
1082 1082  
1083 1083  (% style="color:blue" %)**AT Command: AT+CHE**
1084 1084  
1085 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:710.222px" %)
1086 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
1042 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1043 +|=(% colspan="3" style="width: 707px;" %)AT+CHE
1044 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1087 1087  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
1088 1088  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
1089 1089  
... ... @@ -1098,11 +1098,8 @@
1098 1098  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1099 1099  
1100 1100  * **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1101 -
1102 1102  * **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1103 1103  
1104 -(% style="display:none" %) (%%)
1105 -
1106 1106  == 7.20 Get or Set RXwindows1 timeout ==
1107 1107  
1108 1108  
... ... @@ -1111,41 +1111,32 @@
1111 1111  
1112 1112  (% style="color:blue" %)**AT Command: AT+RX1WTO**
1113 1113  
1114 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:460.222px" %)
1115 -|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:201px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:93px" %)**Response**
1069 +(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1070 +|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1071 +|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1116 1116  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
1117 1117  OK
1118 1118  )))
1119 1119  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1120 1120  
1121 -(% style="display:none" %) (%%)
1122 -
1123 1123  (((
1078 +
1079 +
1080 +
1124 1124  (% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1082 +
1083 +
1125 1125  )))
1126 1126  
1127 1127  [[image:image-20220526162535-1.png]]
1128 1128  
1088 +
1129 1129  (((
1130 1130  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1091 +
1092 +
1131 1131  )))
1132 1132  
1133 -**Example:**
1134 -~1. Set AT+RX1WTO=0, AT+RX1DL=5000, the window opening time is: 53.699ms
1135 -
1136 -[[image:image-20240906095336-1.png||height="404" width="759"]]
1137 -
1138 -
1139 -2. Set AT+RX1WTO=128, AT+RX1DL=5000, the window opening time is: 149.644ms
1140 -
1141 -[[image:image-20240906095433-2.png||height="403" width="756"]]
1142 -
1143 -
1144 -3. Set AT+RX1WTO=128, AT+RX1DL=5000, the window opening time is: 298.221ms
1145 -
1146 -[[image:image-20240906095527-3.png||height="400" width="749"]]
1147 -
1148 -
1149 1149  == 7.21 Get or Set RXwindows2 timeout ==
1150 1150  
1151 1151  
... ... @@ -1154,29 +1154,14 @@
1154 1154  
1155 1155  (% style="color:blue" %)**AT Command: AT+RX2WTO**
1156 1156  
1157 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:448px" %)
1158 -|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:192px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:90px" %)**Response**
1159 -|(% style="width:162px" %)AT+RX2WTO=?|(% style="width:192px" %)Get RXwindows2 timeout|(% style="width:90px" %)7(((
1103 +(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1104 +|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1105 +|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1106 +|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
1160 1160  OK
1161 1161  )))
1162 -|(% style="width:162px" %)AT+RX2WTO=20|(% style="width:192px" %)Set RXwindows2 timeout|(% style="width:90px" %)OK
1109 +|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1163 1163  
1164 -**Example:**
1165 -~1. Set AT+RX2WTO=0, AT+RX2DL=6000, the window opening time is: 48.435ms
1166 -
1167 -(% style="display:none" %) (%%) [[image:image-20240906095619-4.png||height="375" width="703"]]
1168 -
1169 -
1170 -2. Set AT+RX2WTO=128, AT+RX2DL=6000, the window opening time is: 3011ms
1171 -
1172 -[[image:image-20240906095726-5.png||height="381" width="714"]]
1173 -
1174 -
1175 -3. Set AT+RX2WTO=255, AT+RX2DL=6000, the window opening time is: 3009ms
1176 -
1177 -[[image:image-20240906095811-6.png||height="380" width="711"]]
1178 -
1179 -
1180 1180  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1181 1181  
1182 1182  
... ... @@ -1185,12 +1185,13 @@
1185 1185  
1186 1186  (% style="color:blue" %)**AT Command: AT+DWELLT**
1187 1187  
1188 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:419px" %)
1189 -|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:157px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:95px" %)**Response**
1190 -|(% style="width:162px" %)AT+DWELLT=?|(% style="width:157px" %)Get uplinkdwelltime|(% style="width:95px" %)1(((
1119 +(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1120 +|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1121 +|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1122 +|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
1191 1191  OK
1192 1192  )))
1193 -|(% style="width:162px" %)AT+DWELLT=0|(% style="width:157px" %)Set uplinkdwelltime|(% style="width:95px" %)OK
1125 +|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
1194 1194  
1195 1195  (% style="color:blue" %)**Downlink Command: 0x25**
1196 1196  
... ... @@ -1199,11 +1199,8 @@
1199 1199  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1200 1200  
1201 1201  * **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1202 -
1203 1203  * **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1204 1204  
1205 -(% style="display:none" %) (%%)
1206 -
1207 1207  == 7.23 Set Packet Receiving Response Level ==
1208 1208  
1209 1209  
... ... @@ -1210,30 +1210,25 @@
1210 1210  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1211 1211  
1212 1212  
1213 -(% style="color:blue" %)**RPL value:**
1142 +**RPL value:**
1214 1214  
1215 1215  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1216 -
1217 1217  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1218 -
1219 1219  * **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1220 -
1221 1221  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1222 -
1223 1223  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1224 1224  
1225 -(% style="color:blue" %)**Case Analyes:**
1150 +**Case Analyes:**
1226 1226  
1227 1227  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1228 -
1229 1229  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1230 -
1231 1231  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1232 1232  
1233 1233  (% style="color:blue" %)**AT Command: AT+RPL**
1234 1234  
1235 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:536.222px" %)
1236 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:263px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:109px" %)**Response**
1158 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1159 +|=(% colspan="3" style="width: 533px;" %)AT+RPL
1160 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1237 1237  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
1238 1238  OK
1239 1239  )))
... ... @@ -1246,22 +1246,20 @@
1246 1246  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1247 1247  
1248 1248  * **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1249 -
1250 1250  * **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1251 1251  
1252 -(% style="display:none" %) (%%)
1253 -
1254 1254  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1255 1255  
1256 1256  
1257 1257  (% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1258 1258  
1259 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:589px" %)
1260 -|(% style="background-color:#4f81bd; color:white; width:227px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:300px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:87px" %)**Response**
1261 -|(% style="width:227px" %)AT+SETMAXNBTRANS=1，0|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1180 +(% border="1" style="background-color:#ffffcc; color:green; width:589px" %)
1181 +|=(% colspan="3" style="width: 586px;" %)AT+**SETMAXNBTRANS**
1182 +|(% style="width:227px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:87px" %)**Response**
1183 +|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1262 1262  OK
1263 1263  )))
1264 -|(% style="width:227px" %)AT+SETMAXNBTRANS=？，1|(% style="width:300px" %)(((
1186 +|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1265 1265  value2: 0: uplink fcnt doesn't change for each NBTrans;
1266 1266  
1267 1267  1: uplink fcnt increase by 1 for each NBTrans.
... ... @@ -1278,11 +1278,8 @@
1278 1278  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1279 1279  
1280 1280  * Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1281 -
1282 1282  * Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1283 1283  
1284 -(% style="display:none" %) (%%)
1285 -
1286 1286  == 7.25 Device offline rejoining （LWS007) ==
1287 1287  
1288 1288  
... ... @@ -1291,16 +1291,16 @@
1291 1291  AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
1292 1292  
1293 1293  * ACK_Timout_1: Unit: min
1294 -
1295 1295  * ACK_Timout_2: Unit: min
1296 1296  
1297 -(% border="1" style="background-color:#f2f2f2; width:562px" %)
1298 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
1215 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1216 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1217 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1299 1299  |(% style="width:160px" %)(((
1300 1300  AT+DDETECT=1,1440,2880
1301 1301  
1302 1302  value1
1303 -)))|(% style="width:272px" %)Enable online detect|(% style="width:89px" %)(((
1222 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1304 1304  1
1305 1305  
1306 1306  OK
... ... @@ -1309,7 +1309,7 @@
1309 1309  AT+DDETECT=1,?,2880
1310 1310  
1311 1311  value2
1312 -)))|(% style="width:272px" %)Online detection packet sending time|(% style="width:89px" %)(((
1231 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1313 1313  
1314 1314  
1315 1315  OK
... ... @@ -1318,7 +1318,7 @@
1318 1318  AT+DDETECT=1,1440,？
1319 1319  
1320 1320  value3
1321 -)))|(% style="width:272px" %)Process rejoin|(% style="width:89px" %)(((
1240 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1322 1322  
1323 1323  
1324 1324  OK
... ... @@ -1331,55 +1331,42 @@
1331 1331  If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1332 1332  
1333 1333  * **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1253 +** 0x01 : Flag
1254 +** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1255 +** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
1256 +** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1334 1334  
1335 -*
1336 -** 0x01** : Flag**
1337 -
1338 - **0x05A0 **: ACK_Timout_1 : 1440minutes (24 hours)
1339 -
1340 - **0x0B40 **: ACK_Timout_2 : 2880minutes (48 hours)
1341 -
1342 -* **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1343 -
1344 -(% style="display:none" %) (%%)
1345 -
1346 1346  == 7.26 Request the server to send an ACK ==
1347 1347  
1348 1348  
1349 -Feature: Mode for sending data for which acknowledgment was not received. LoraWAN Network Server(eg. The Things NetWork/ChirpStack/AWS/...).
1350 -
1351 1351  (% style="color:blue" %)**AT Command: AT+PNACKMD**
1352 1352  
1353 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:889px" %)
1354 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:627px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
1355 -|(% style="width:160px" %)AT+PNACKMD=1|(% style="width:627px" %)If the node uploads the ACK as confirm, it will request the LoraWAN Network Server to send an ACK. If the LoraWAN Network Server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:100px" %)1(((
1263 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1264 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1265 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1266 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1356 1356  OK
1357 1357  )))
1358 -|(% style="width:160px" %)AT+PNACKMD=0|(% style="width:627px" %)off request the LoraWAN Network Server to send an ACK|(% style="width:100px" %)(((
1269 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1359 1359  0
1271 +
1360 1360  OK
1361 1361  )))
1362 1362  
1363 -(% style="display:none" %) (%%) (% style="color:blue" %)**Downlink Command: 0x34**
1364 -
1365 -0X34 01  ~/~/Same As AT+PNACKMD=1
1366 -
1367 -0x34 00  ~/~/Same As AT+PNACKMD=0
1368 -
1369 -
1370 1370  == 7.27 Adjust network rejoining interval ==
1371 1371  
1372 1372  
1373 1373  (% style="color:blue" %)**AT Command: AT+RJTDC**
1374 1374  
1375 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:889px" %)
1376 -|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:357px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
1377 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:357px" %)Show the ReJoin data transmission interval in min|(% style="width:361px" %)30(((
1280 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1281 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1282 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1283 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1378 1378  OK
1379 1379  
1380 1380  the interval is 30 min
1381 1381  )))
1382 -|(% style="width:165px" %)AT+RJTDC=60|(% style="width:357px" %)Set the ReJoin data transmission interval in min|(% style="width:361px" %)OK(((
1288 +|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1383 1383  Set the ReJoin data transmission interval to 60 min
1384 1384  )))
1385 1385  
... ... @@ -1389,23 +1389,17 @@
1389 1389  
1390 1390  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1391 1391  
1392 -* **Example 1:** Downlink Payload: 26000A  ~/~/  Set AT+RJTDC=10
1298 +* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1299 +* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1393 1393  
1394 -* **Example 2: **Downlink Payload: 260002  ~/~/  Set AT+RJTDC=2
1395 -
1396 -(% style="display:none" %) (%%)
1397 -
1398 1398  = 8. AT Commands Combination =
1399 1399  
1400 1400  == 8.1 Set a fix RX2DR for downlink window ==
1401 1401  
1402 1402  
1403 -* (% style="color:blue" %)**AT+ADR=0             **(%%) **~/~/**  Disable ADR first
1306 +* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1307 +* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1404 1404  
1405 -* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~/~/**  Set xxxx to your wanted DataRate
1406 -
1407 -(% style="display:none" %) (%%)
1408 -
1409 1409  == 8.2 Use Downlink Command to set a fix uplink DR ==
1410 1410  
1411 1411  
... ... @@ -1414,9 +1414,7 @@
1414 1414  **Same as:**
1415 1415  
1416 1416  * AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1417 -
1418 1418  * AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1419 -
1420 1420  * AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1421 1421  
1422 1422  
image-20240906095336-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.kai
Size
... ... @@ -1,1 +1,0 @@
1 -111.0 KB
Content
image-20240906095433-2.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.kai
Size
... ... @@ -1,1 +1,0 @@
1 -113.2 KB
Content
image-20240906095527-3.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.kai
Size
... ... @@ -1,1 +1,0 @@
1 -111.6 KB
Content
image-20240906095619-4.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.kai
Size
... ... @@ -1,1 +1,0 @@
1 -112.4 KB
Content
image-20240906095726-5.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.kai
Size
... ... @@ -1,1 +1,0 @@
1 -114.0 KB
Content
image-20240906095811-6.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.kai
Size
... ... @@ -1,1 +1,0 @@
1 -112.8 KB
Content