Last modified by kai on 2024/09/06 10:00
<
From version < 7.9 >
edited by Xiaoling
on 2022/05/11 11:31
To version < 7.4 >
edited by Xiaoling
on 2022/05/11 09:32
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -23,8 +23,9 @@
23 23  
24 24  = 3. Support End Node and firmware version =
25 25  
26 -(% style="background-color:#ffffcc; color:green; width:995.222px" %)
27 -|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
26 +
27 +(% border="1" style="background-color:#ffffcc; color:green; width:995.222px" %)
28 +|=(% colspan="3" style="width: 992px;" %) Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 28  |(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 29  |(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
30 30  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
... ... @@ -46,11 +46,11 @@
46 46  
47 47  (% class="box infomessage" %)
48 48  (((
49 -**AT Command: AT+TDC**
50 +AT Command: AT+TDC
50 50  )))
51 51  
52 -(% style="background-color:#ffffcc; color:green; width:727.222px" %)
53 -|=(% colspan="3" style="width: 724px;" %)AT+TDC
53 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
54 +|=(% colspan="3" style="width: 724px;" %) AT+TDC
54 54  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
55 55  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
56 56  OK
... ... @@ -61,9 +61,7 @@
61 61  Set transmit interval to 60000ms = 60 seconds
62 62  )))
63 63  
64 -{{info}}
65 65  **Downlink Command: 0x01**
66 -{{/info}}
67 67  
68 68  Format: Command Code (0x01) followed by 3 bytes time value.
69 69  
... ... @@ -77,12 +77,13 @@
77 77  Feature: Reboot End Node to perform a new OTAA or ABP Join.
78 78  
79 79  {{info}}
80 -**AT Command: ATZ**
79 +AT Command: ATZ
81 81  {{/info}}
82 82  
83 -(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
84 -|=(% colspan="3" %)ATZ: Trig a reset of the MCU
82 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +|=(% colspan="3" %) ATZ: Trig a reset of the MCU
85 85  |**Command Example**|**Function**|**Response**
85 +~)~)~)
86 86  |ATZ|Reset MCU|(((
87 87  Device reset and show booting info
88 88  
... ... @@ -97,46 +97,35 @@
97 97  <followed by the Tx and Rx information>
98 98  )))
99 99  
100 -{{info}}
101 -**Downlink Command: 0x04**
102 -{{/info}}
100 +Downlink Command: 0x04
103 103  
104 104  Format: Command Code (0x04) followed by FF.
105 105  
106 -If the downlink payload=**04FF**, the end node will reboot.
104 +If the downlink payload=04FF, the end node will reboot.
107 107  
108 108  == 4.3 Reset to factory Default ==
109 109  
110 110  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
111 111  
112 -{{info}}
113 -**AT Command: AT+FDR**
114 -{{/info}}
110 +AT Command: AT+FDR
115 115  
116 -(% style="background-color:#ffffcc; color:green; width:831.222px" %)
117 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default
118 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
119 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
120 -Device reset to factory default parameters and show booting info
112 +|=(% colspan="3" %)Reset to factory default
113 +|**Command Example**|**Function**|**Response**
114 +|AT+FDR|Reset to factory default|Device reset to factory default parameters and show booting info
121 121  
122 -LSN50 Device/LoRa ST Module
123 -
116 +{{{LSN50 Device/LoRa ST Module
124 124  Image Version: XX
125 -
126 126  Frequency Band: XX
127 -
128 128  DevEui= XX XX XX XX XX XX XX XX
129 -
130 130  Please set the parameters or reset Device to apply change
131 -)))
121 +}}}
132 132  
133 -{{info}}
134 -**Downlink Command: 0x04**
135 -{{/info}}
136 136  
124 +Downlink Command: 0x04
125 +
137 137  Format: Command Code (0x04) followed by FE.
138 138  
139 -If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
128 +If the downlink payload=04FE, Reset Parameters to Factory Default, Keys Reserve.
140 140  
141 141  
142 142  == 4.4 Show Firmware Version ==
... ... @@ -143,34 +143,30 @@
143 143  
144 144  Feature: Show firmware version. No downlink command yet.
145 145  
146 -{{info}}
147 -**AT Command: AT+VER**
148 -{{/info}}
135 +AT Command: AT+VER
149 149  
150 -(% style="background-color:#ffffcc; color:green" %)
151 151  |=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 152  |**Command Example**|**Function**|**Response**
153 -|AT+VER=?|Show Image version and Frequency Band|(((
154 -1.3 EU868
139 +|AT+VER=?|Show Image version and Frequency Band|
155 155  
141 +{{{1.3 EU868
156 156  OK
157 -)))
143 +}}}
158 158  
159 -{{info}}
160 -**Downlink Command: 0x26 (Valid in 006 stack)**
161 -{{/info}}
162 162  
146 +Downlink Command: 0x26 (Valid in 006 stack)
147 +
163 163  Downlink Format: 0x26
164 164  
165 165  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
166 166  
167 -**xx: Software Type:**
152 +xx: Software Type:
168 168  
169 169  * 0x00 01: LGT92 Version
170 170  * 0x00 02: LBT1
171 171  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
172 172  
173 -**yy: Frequency Band:**
158 +yy: Frequency Band:
174 174  
175 175  * 0x01: EU868
176 176  * 0x02: US915
... ... @@ -183,7 +183,7 @@
183 183  * 0x09: AS923-2
184 184  * 0xa0: AS923-3
185 185  
186 -**zz: Subband**
171 +zz: Subband
187 187  
188 188  firmware version: v1.1.0 ~-~-> 110
189 189  
... ... @@ -192,27 +192,21 @@
192 192  
193 193  Feature: Show All configure. No downlink command yet.
194 194  
195 -{{info}}
196 -**AT Command: AT+CFG**
197 -{{/info}}
180 +AT Command: AT+CFG
198 198  
199 -(% style="background-color:#ffffcc; color:green; width:599.222px" %)
200 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
201 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
202 -|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
203 -AT+DEUI = XX XX XX XX XX XX XX XX
182 +|=(% colspan="3" %)AT+CFG: Print all configurations
183 +|**Command Example**|**Function**|**Response**
184 +|AT+CFG|Show all configures|
204 204  
186 +{{{AT+DEUI = XX XX XX XX XX XX XX XX
205 205  AT+DADDR=XXXXXXXX
206 -
207 207  ……….
208 -
209 209  AT+RX2WTO=X
210 -
211 211  AT+CHS=868100000
212 -
213 213  OK
214 -)))
192 +}}}
215 215  
194 +
216 216  = 5. Keys, IDs and EUIs management =
217 217  
218 218  == 5.1 Application EUI ==
... ... @@ -219,49 +219,40 @@
219 219  
220 220  Feature: Get or Set the Application EUI.
221 221  
222 -{{info}}
223 -**AT Command: AT+APPEUI**
224 -{{/info}}
201 +AT Command: AT+APPEUI
225 225  
226 -(% style="background-color:#ffffcc; color:green; width:686.222px" %)
227 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI
228 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
229 -|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
203 +|=(% colspan="3" %)AT+APPEUI
204 +|**Command Example**|**Function**|**Response**
205 +|AT+APPEUI=?|Get the Application EUI|00 b3 d5 00 00 00 00 00(((
230 230  OK
231 231  )))
232 -|(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
208 +|AT+APPEUI=00 b3 d5 7e f0 00 4d 34|Set the Application EUI|OK
233 233  
234 234  == 5.2 Application Key ==
235 235  
236 236  Feature: Get or Set the Application Key.
237 237  
238 -{{info}}
239 -**AT Command: AT+APPKEY**
240 -{{/info}}
214 +AT Command: AT+APPKEY
241 241  
242 -(% style="background-color:#ffffcc; color:green; width:976.222px" %)
243 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY
244 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
245 -|(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
216 +|=(% colspan="3" %)AT+APPKEY
217 +|**Command Example**|**Function**|**Response**
218 +|AT+APPKEY=?|Get the Application Key|00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
246 246  OK
247 247  )))
248 -|(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
221 +|AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|Set the Application Key.|OK
249 249  
250 250  == 5.3 Application Session Key ==
251 251  
252 252  Feature: Get or Set the Application Session Key.
253 253  
254 -{{info}}
255 -**AT Command: AT+APPSKEY**
256 -{{/info}}
227 +AT Command: AT+APPSKEY
257 257  
258 -(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
259 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
260 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
261 -|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
229 +|=(% colspan="3" %)AT+APPSKEY
230 +|**Command Example**|**Function**|**Response**
231 +|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
262 262  OK
263 263  )))
264 -|(% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)(((
234 +|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)(((
265 265  OK
266 266  )))
267 267  
... ... @@ -269,35 +269,29 @@
269 269  
270 270  Feature: Get or Set the Device Address.
271 271  
272 -{{info}}
273 -**AT Command: AT+DADDR**
274 -{{/info}}
242 +AT Command: AT+DADDR
275 275  
276 -(% style="background-color:#ffffcc; color:green; width:795.222px" %)
277 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR
278 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
279 -|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
244 +|=(% colspan="3" %)AT+DADDR
245 +|**Command Example**|**Function**|**Response**
246 +|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)(((
280 280  A8 40 41 FF
281 281  
282 282  OK
283 283  )))
284 -|(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
251 +|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK
285 285  
286 286  == 5.5 Device EUI ==
287 287  
288 288  Feature: Get or Set the Device EUI.
289 289  
290 -{{info}}
291 -**AT Command: AT+DEUI**
292 -{{/info}}
257 +AT Command: AT+DEUI
293 293  
294 -(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
295 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI
296 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
297 -|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
259 +|=(% colspan="3" %)AT+DEUI
260 +|**Command Example**|**Function**|**Response**
261 +|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55(((
298 298  OK
299 299  )))
300 -|(% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((
264 +|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((
301 301  OK
302 302  )))
303 303  
... ... @@ -305,33 +305,27 @@
305 305  
306 306  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
307 307  
308 -{{info}}
309 -**AT Command: AT+NWKID**
310 -{{/info}}
272 +AT Command: AT+NWKID
311 311  
312 -(% style="background-color:#ffffcc; color:green; width:448.222px" %)
313 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID
314 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
315 -|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
274 +|=(% colspan="3" %)AT+NWKID
275 +|**Command Example**|**Function**|**Response**
276 +|AT+NWKID=?|Get the Network ID.|a8 40 41 ff(((
316 316  OK
317 317  )))
318 -|(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
279 +|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK
319 319  
320 320  == 5.7 Network Session Key ==
321 321  
322 322  Feature: Get or Set the Network Session Key
323 323  
324 -{{info}}
325 -**AT Command: AT+NWKSKEY**
326 -{{/info}}
285 +AT Command: AT+NWKSKEY
327 327  
328 -(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
329 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
330 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
331 -|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
287 +|=(% colspan="3" %)AT+NWKSKEY
288 +|**Command Example**|**Function**|**Response**
289 +|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
332 332  OK
333 333  )))
334 -|(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
292 +|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK
335 335  
336 336  = 6. Joining and sending date on LoRaWAN network =
337 337  
... ... @@ -339,18 +339,15 @@
339 339  
340 340  Feature: Get or Set the confirmation mode (0-1).
341 341  
342 -{{info}}
343 -**AT Command: AT+CFM**
344 -{{/info}}
300 +AT Command: AT+CFM
345 345  
346 -(% style="background-color:#ffffcc; color:green; width:710.222px" %)
347 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
348 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
349 -|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
302 +|=(% colspan="3" %)AT+CFM
303 +|**Command Example**|**Function**|**Response**
304 +|AT+CFM=?|Get the confirmation mode|0(((
350 350  OK
351 351  )))
352 -|(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
353 -|(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
307 +|AT+CFM=1|Set the confirmation mode|OK
308 +|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR
354 354  
355 355  Downlink Command: 0x05
356 356  
... ... @@ -365,14 +365,11 @@
365 365  
366 366  Feature: Get confirmation status of the last AT+SEND (0-1).
367 367  
368 -{{info}}
369 -**AT Command: AT+CFS**
370 -{{/info}}
323 +AT Command: AT+CFS
371 371  
372 -(% style="background-color:#ffffcc; color:green; width:534.222px" %)
373 -|=(% colspan="3" style="width: 531px;" %)AT+CFS
374 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
375 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
325 +|=(% colspan="3" %)AT+CFS
326 +|**Command Example**|**Function**|**Response**
327 +|AT+CFS=?|Get confirmation status|0(((
376 376  OK
377 377  )))
378 378  
... ... @@ -380,14 +380,11 @@
380 380  
381 381  Feature: Join network.
382 382  
383 -{{info}}
384 -**AT Command: AT+JOIN**
385 -{{/info}}
335 +AT Command: AT+JOIN
386 386  
387 -(% style="background-color:#ffffcc; color:green; width:647.222px" %)
388 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN
389 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
390 -|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
337 +|=(% colspan="3" %)AT+JOIN
338 +|**Command Example**|**Function**|**Response**
339 +|AT+JOIN ?|Get imformation.|AT+JOIN: Join network(((
391 391  OK
392 392  
393 393  While Error in format, return AT_BUSY_ERROR
... ... @@ -397,42 +397,34 @@
397 397  
398 398  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
399 399  
400 -{{info}}
401 -**AT Command: AT+NJM**
402 -{{/info}}
349 +AT Command: AT+NJM
403 403  
404 -(% style="background-color:#ffffcc; color:green; width:753.222px" %)
405 -|=(% colspan="3" style="width: 750px;" %)AT+NJM
406 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
407 -|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
351 +|=(% colspan="3" %)AT+NJM
352 +|**Command Example**|**Function**|**Response**
353 +|AT+NJM=?|Get the Network Join Mode|1(((
408 408  OK
409 409  )))
410 -|(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
411 -|(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
356 +|AT+NJM=0|Set the Network Join Mode|OK
357 +|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR
412 412  
413 -{{info}}
414 -**Downlink Command: 0x20**
415 -{{/info}}
359 +Downlink Command: 0x20
416 416  
417 417  Format: Command Code (0x20) followed by 1 bytes mode value.
418 418  
419 419  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
420 420  
421 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
422 -* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
365 +* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O
366 +* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1
423 423  
424 424  == 6.5 LoRa® Network Join Status ==
425 425  
426 426  Feature: LoRa® Network Join Status.
427 427  
428 -{{info}}
429 -**AT Command: AT+NJS**
430 -{{/info}}
372 +AT Command: AT+NJS
431 431  
432 -(% style="background-color:#ffffcc; color:green; width:498.222px" %)
433 -|=(% colspan="3" style="width: 495px;" %)AT+NJS
434 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
435 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
374 +|=(% colspan="3" %)AT+NJS
375 +|**Command Example**|**Function**|**Response**
376 +|AT+NJS=?|Get the join status.|0(((
436 436  OK
437 437  )))
438 438  
... ... @@ -440,14 +440,11 @@
440 440  
441 441  Feature: Print Last Received Data in Raw Format<port:data>.
442 442  
443 -{{info}}
444 -**AT Command: AT+RECV**
445 -{{/info}}
384 +AT Command: AT+RECV
446 446  
447 -(% style="background-color:#ffffcc; color:green; width:587.222px" %)
448 -|=(% colspan="3" style="width: 584px;" %)AT+RECV
449 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
450 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
386 +|=(% colspan="3" %)AT+RECV
387 +|**Command Example**|**Function**|**Response**
388 +|AT+RECV=?|print last received data in raw format.|0:(((
451 451  OK
452 452  )))
453 453  
... ... @@ -455,14 +455,11 @@
455 455  
456 456  Feature: Print Last Received Data in Binary Format<port:data>.
457 457  
458 -{{info}}
459 -**AT Command: AT+RECVB**
460 -{{/info}}
396 +AT Command: AT+RECVB
461 461  
462 -(% style="background-color:#ffffcc; color:green; width:793.222px" %)
463 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB
464 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
465 -|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
398 +|=(% colspan="3" %)AT+RECVB
399 +|**Command Example**|**Function**|**Response**
400 +|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010(((
466 466  OK
467 467  )))
468 468  
... ... @@ -470,14 +470,11 @@
470 470  
471 471  Feature: Send Text Data<port:data>.
472 472  
473 -{{info}}
474 -**AT Command: AT+SEND**
475 -{{/info}}
408 +AT Command: AT+SEND
476 476  
477 -(% style="background-color:#ffffcc; color:green; width:991.222px" %)
478 -|=(% colspan="3" style="width: 988px;" %)AT+SEND
479 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
480 -|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
410 +|=(% colspan="3" %)AT+SEND
411 +|**Command Example**|**Function**|**Response**
412 +|AT+SEND=12:hello world|Send text data along with the application port.|OK(((
481 481  While Error in format, return
482 482  
483 483  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
... ... @@ -489,15 +489,12 @@
489 489  
490 490  Feature: Send hexadecimal data along with the application port.
491 491  
492 -{{info}}
493 -**AT Command: AT+SENDB**
494 -{{/info}}
424 +AT Command: AT+SENDB
495 495  
496 -(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
497 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
498 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
499 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
500 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
426 +|=(% colspan="3" %)AT+SENDB
427 +|**Command Example**|**Function**|**Response**
428 +|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK
429 +|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return(((
501 501  AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
502 502  
503 503  
... ... @@ -509,46 +509,39 @@
509 509  
510 510  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
511 511  
512 -{{info}}
513 -**AT Command: AT+ADR**
514 -{{/info}}
515 515  
516 -(% style="background-color:#ffffcc; color:green; width:683.222px" %)
517 -|=(% colspan="3" style="width: 680px;" %)AT+ADR
518 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
519 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
442 +AT Command: AT+ADR
443 +
444 +|=(% colspan="3" %)AT+ADR
445 +|**Command Example**|**Function**|**Response**
446 +|AT+ADR=?|Get the Adaptive Data Rate setting.|1(((
520 520  OK
521 521  )))
522 -|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK
523 -|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((
449 +|AT+ADR=0|Set the Adaptive Data Rate setting.|OK
450 +|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return(((
524 524  AT_PARAM_ERROR
525 525  )))
526 526  
527 -{{info}}
528 -**Downlink Command: 0x22**
529 -{{/info}}
454 +Downlink Command: 0x22
530 530  
531 531  
532 532  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
533 533  
534 -* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
535 -* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
459 +* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1.
460 +* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0.
536 536  
537 537  == 7.2 LoRa® Class ==
538 538  
539 539  Feature: Get or Set the Device Class(Currently only support class A, class C).
540 540  
541 -{{info}}
542 -**AT Command:AT+CLASS**
543 -{{/info}}
466 +AT Command:AT+CLASS
544 544  
545 -(% style="background-color:#ffffcc; color:green; width:507.222px" %)
546 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS
547 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
548 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
468 +|=(% colspan="3" %)AT+CLASS
469 +|**Command Example**|**Function**|**Response**
470 +|AT+CLASS=?|Get the Device Class.|A(((
549 549  OK
550 550  )))
551 -|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((
473 +|AT+CLASS=C|Set the Device Class.|OK(((
552 552  
553 553  )))
554 554  
... ... @@ -556,17 +556,14 @@
556 556  
557 557  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
558 558  
559 -{{info}}
560 -**AT Command:AT+DCS**
561 -{{/info}}
481 +AT Command:AT+DCS
562 562  
563 -(% style="background-color:#ffffcc; color:green; width:515.222px" %)
564 -|=(% colspan="3" style="width: 512px;" %)AT+DCS
565 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
566 -|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
483 +|=(% colspan="3" %)AT+DCS
484 +|**Command Example**|**Function**|**Response**
485 +|AT+DCS=?|Get the ETSI Duty Cycle setting.|1(((
567 567  OK
568 568  )))
569 -|(% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((
488 +|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK(((
570 570  
571 571  )))
572 572  
... ... @@ -574,45 +574,37 @@
574 574  
575 575  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
576 576  
577 -{{info}}
578 -**AT Command: AT+DR**
579 -{{/info}}
496 +AT Command: AT+DR
580 580  
581 -(% style="background-color:#ffffcc; color:green; width:466.222px" %)
582 -|=(% colspan="3" style="width: 463px;" %)AT+DR
583 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
584 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
498 +|=(% colspan="3" %)AT+DR
499 +|**Command Example**|**Function**|**Response**
500 +|AT+DR=?|Get the Data Rate.|5(((
585 585  OK
586 586  )))
587 -|(% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((
503 +|AT+DR=2|Set the Data Rate.|OK(((
588 588  
589 589  )))
590 590  
591 -{{info}}
592 -**Downlink Command: 0x2200aaFF**
593 -{{/info}}
507 +Downlink Command: 0x2200aaFF
594 594  
595 595  
596 596  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
597 597  
598 -* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
599 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
512 +* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1.
513 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0.
600 600  
601 601  == 7.5 Frame Counter Downlink ==
602 602  
603 603  Feature: Get or Set the Frame Counter Downlink.
604 604  
605 -{{info}}
606 -**AT Command:AT+FCD**
607 -{{/info}}
519 +AT Command:AT+FCD
608 608  
609 -(% style="background-color:#ffffcc; color:green; width:693.222px" %)
610 -|=(% colspan="3" style="width: 690px;" %)AT+FCD
611 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
612 -|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
521 +|=(% colspan="3" %)AT+FCD
522 +|**Command Example**|**Function**|**Response**
523 +|AT+FCD=?|Get the Frame Counter Downlink.|0(((
613 613  OK
614 614  )))
615 -|(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
526 +|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)(((
616 616  OK
617 617  
618 618  
... ... @@ -622,17 +622,14 @@
622 622  
623 623  Feature: Get or Set the Frame Counter Uplink.
624 624  
625 -{{info}}
626 -**AT Command:AT+FCU**
627 -{{/info}}
536 +AT Command:AT+FCU
628 628  
629 -(% style="background-color:#ffffcc; color:green; width:534.222px" %)
630 -|=(% colspan="3" style="width: 531px;" %)AT+FCU
631 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
632 -|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
538 +|=(% colspan="3" %)AT+FCU
539 +|**Command Example**|**Function**|**Response**
540 +|AT+FCU=?|Get the Frame Counter Uplink.|0(((
633 633  OK
634 634  )))
635 -|(% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((
543 +|AT+FCU=10|Set the Frame Counter Uplink.|OK(((
636 636  
637 637  )))
638 638  
... ... @@ -640,17 +640,14 @@
640 640  
641 641  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
642 642  
643 -{{info}}
644 -**AT Command:AT+JN1DL**
645 -{{/info}}
551 +AT Command:AT+JN1DL
646 646  
647 -(% style="background-color:#ffffcc; color:green; width:537.222px" %)
648 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
649 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
650 -|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
553 +|=(% colspan="3" %)AT+JN1DL
554 +|**Command Example**|**Function**|**Response**
555 +|AT+JN1DL=?|Get the Join Accept Delay.|5000(((
651 651  OK
652 652  )))
653 -|(% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((
558 +|AT+JN1DL=10000|Set the Join Accept Delay.|OK(((
654 654  
655 655  )))
656 656  
... ... @@ -658,17 +658,14 @@
658 658  
659 659  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
660 660  
661 -{{info}}
662 -**AT Command:AT+JN2DL**
663 -{{/info}}
566 +AT Command:AT+JN2DL
664 664  
665 -(% style="background-color:#ffffcc; color:green; width:538.222px" %)
666 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
667 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
668 -|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
568 +|=(% colspan="3" %)AT+JN2DL
569 +|**Command Example**|**Function**|**Response**
570 +|AT+JN2DL=?|Get the Join Accept Delay.|6000(((
669 669  OK
670 670  )))
671 -|(% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((
573 +|AT+JN2DL=20000|Set the Join Accept Delay.|OK(((
672 672  
673 673  )))
674 674  
... ... @@ -676,17 +676,14 @@
676 676  
677 677  Feature: Get or Set the public network mode. (0: off, 1: on)
678 678  
679 -{{info}}
680 -**AT Command:AT+PNM**
681 -{{/info}}
581 +AT Command:AT+PNM
682 682  
683 -(% style="background-color:#ffffcc; color:green; width:667.222px" %)
684 -|=(% colspan="3" style="width: 664px;" %)AT+PNM
685 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
686 -|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
583 +|=(% colspan="3" %)AT+PNM
584 +|**Command Example**|**Function**|**Response**
585 +|AT+PNM=?|Get the public network mode.|1(((
687 687  OK
688 688  )))
689 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
588 +|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)(((
690 690  OK
691 691  
692 692  
... ... @@ -696,17 +696,14 @@
696 696  
697 697  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
698 698  
699 -{{info}}
700 -**AT Command:AT+RX1DL**
701 -{{/info}}
598 +AT Command:AT+RX1DL
702 702  
703 -(% style="background-color:#ffffcc; color:green; width:408.222px" %)
704 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
705 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
706 -|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
600 +|=(% colspan="3" %)AT+RX1DL
601 +|**Command Example**|**Function**|**Response**
602 +|AT+RX1DL=?|Get the delay.|1000(((
707 707  OK
708 708  )))
709 -|(% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((
605 +|AT+RX1DL=1500|Set the delay.|OK(((
710 710  
711 711  )))
712 712  
... ... @@ -714,17 +714,14 @@
714 714  
715 715  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
716 716  
717 -{{info}}
718 -**AT Command:AT+RX2DL**
719 -{{/info}}
613 +AT Command:AT+RX2DL
720 720  
721 -(% style="background-color:#ffffcc; color:green; width:481.222px" %)
722 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
723 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
724 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
615 +|=(% colspan="3" %)AT+RX2DL
616 +|**Command Example**|**Function**|**Response**
617 +|AT+RX2DL=?|Get the delay.|2000(((
725 725  OK
726 726  )))
727 -|(% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((
620 +|AT+RX2DL=2500|Set the delay.|OK(((
728 728  
729 729  )))
730 730  
... ... @@ -732,17 +732,14 @@
732 732  
733 733  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
734 734  
735 -{{info}}
736 -**AT Command:AT+RX2DR**
737 -{{/info}}
628 +AT Command:AT+RX2DR
738 738  
739 -(% style="background-color:#ffffcc; color:green; width:525.222px" %)
740 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
741 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
742 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
630 +|=(% colspan="3" %)AT+RX2DR
631 +|**Command Example**|**Function**|**Response**
632 +|AT+RX2DR=?|Get the Rx2 window data rate.|2(((
743 743  OK
744 744  )))
745 -|(% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((
635 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK(((
746 746  
747 747  )))
748 748  
... ... @@ -750,17 +750,14 @@
750 750  
751 751  Feature: Get or Set the Rx2 window frequency
752 752  
753 -{{info}}
754 -**AT Command:AT+RX2FQ**
755 -{{/info}}
643 +AT Command:AT+RX2FQ
756 756  
757 -(% style="background-color:#ffffcc; color:green; width:587.222px" %)
758 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
759 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
760 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
645 +|=(% colspan="3" %)AT+RX2FQ
646 +|**Command Example**|**Function**|**Response**
647 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000(((
761 761  OK
762 762  )))
763 -|(% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((
650 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK(((
764 764  
765 765  )))
766 766  
... ... @@ -768,17 +768,14 @@
768 768  
769 769  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
770 770  
771 -{{info}}
772 -**AT Command:AT+TXP**
773 -{{/info}}
658 +AT Command:AT+TXP
774 774  
775 -(% style="background-color:#ffffcc; color:green; width:465.222px" %)
776 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
777 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
778 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
660 +|=(% colspan="3" %)AT+TXP
661 +|**Command Example**|**Function**|**Response**
662 +|AT+TXP=?|Get the Transmit Power.|0(((
779 779  OK
780 780  )))
781 -|(% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((
665 +|AT+TXP=1|Set the Transmit Power.|OK(((
782 782  
783 783  )))
784 784  
... ... @@ -786,21 +786,18 @@
786 786  
787 787  If the downlink payload=22000100, it means setting the TXP to 0.
788 788  
789 -* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
790 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
673 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2.
674 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0.
791 791  
792 792  == 7.15 RSSI of the Last Received Packet ==
793 793  
794 794  Feature: Get or Set the Rx2 window frequency
795 795  
796 -{{info}}
797 -**AT Command:AT+RSSI**
798 -{{/info}}
680 +AT Command:AT+RSSI
799 799  
800 -(% style="background-color:#ffffcc; color:green; width:557.222px" %)
801 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
802 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
803 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
682 +|=(% colspan="3" %)AT+RSSI
683 +|**Command Example**|**Function**|**Response**
684 +|AT+RSSI=?|Get the RSSI of the last received packet.|0(((
804 804  OK
805 805  )))
806 806  
... ... @@ -808,14 +808,11 @@
808 808  
809 809  Feature: Get the SNR of the last received packet
810 810  
811 -{{info}}
812 -**AT Command:AT+SNR**
813 -{{/info}}
692 +AT Command:AT+SNR
814 814  
815 -(% style="background-color:#ffffcc; color:green; width:571.222px" %)
816 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
817 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
818 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
694 +|=(% colspan="3" %)AT+SNR
695 +|**Command Example**|**Function**|**Response**
696 +|AT+SNR=?|Get the RSSI of the last received packet.|0(((
819 819  OK
820 820  )))
821 821  
... ... @@ -823,89 +823,73 @@
823 823  
824 824  Feature: Get or set the application port.
825 825  
826 -{{info}}
827 -**AT Command: AT+PORT**
828 -{{/info}}
704 +AT Command: AT+PORT
829 829  
830 -(% style="background-color:#ffffcc; color:green; width:500.222px" %)
831 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
832 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
833 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
706 +|=(% colspan="3" %)AT+PORT
707 +|**Command Example**|**Function**|**Response**
708 +|AT+PORT=?|Get the application port|21(((
834 834  OK
835 835  )))
836 -|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
711 +|AT+PORT=21|Set the application port|OK
837 837  
838 -{{info}}
839 -**Downlink Command: 0x23**
840 -{{/info}}
713 +Downlink Command: 0x23
841 841  
842 842  Format: Command Code (0x23) followed by 1 bytes port value.
843 843  
844 844  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
845 845  
846 -* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
847 -* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
719 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1
720 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5
848 848  
849 849  == 7.18 Single Channel Mode ==
850 850  
851 851  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
852 852  
853 -{{info}}
854 -**AT Command: AT+CHS**
855 -{{/info}}
726 +AT Command: AT+CHS
856 856  
857 -(% style="background-color:#ffffcc; color:green; width:603.222px" %)
858 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
859 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
860 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
728 +|=(% colspan="3" %)AT+CHS
729 +|**Command Example**|**Function**|**Response**
730 +|AT+CHS=?|Get Frequency for Single Channel Mode|0(((
861 861  OK
862 862  )))
863 -|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
733 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK
864 864  
865 865  == 7.19 Eight Channel Mode ==
866 866  
867 867  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
868 868  
869 -{{info}}
870 -**AT Command: AT+CHE**
871 -{{/info}}
739 +AT Command: AT+CHE
872 872  
873 -(% style="background-color:#ffffcc; color:green; width:710.222px" %)
874 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
875 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
876 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
741 +|=(% colspan="3" %)AT+CHE
742 +|**Command Example**|**Function**|**Response**
743 +|AT+CHE=?|Get eight channels mode|1(((
877 877  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
878 878  
879 879  OK
880 880  )))
881 -|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
748 +|AT+CHE=1|Set eight channels mode|OK
882 882  
883 -{{info}}
884 -**Downlink Command: 0x24**
885 -{{/info}}
750 +Downlink Command: 0x24
886 886  
887 887  Format: Command Code (0x24) followed by 1 bytes channel value.
888 888  
889 889  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
890 890  
891 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
892 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
756 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1
757 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5
893 893  
894 894  == 7.20 Get or Set RXwindows1 timeout ==
895 895  
896 896  Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
897 897  
898 -{{info}}
899 -**AT Command: AT+RX1WTO**
900 -{{/info}}
763 +AT Command: AT+RX1WTO
901 901  
902 -(% style="background-color:#ffffcc; color:green; width:460.222px" %)
903 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
904 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
905 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
765 +|=(% colspan="3" %)AT+ RX1WTO
766 +|**Command Example**|**Function**|**Response**
767 +|AT+RX1WTO=?|Get RXwindows1 timeout|14(((
906 906  OK
907 907  )))
908 -|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
770 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK
909 909  
910 910  AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
911 911  

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0