Last modified by kai on 2024/09/06 10:00
<
From version < 7.4 >
edited by Xiaoling
on 2022/05/11 09:32
To version < 7.9 >
edited by Xiaoling
on 2022/05/11 11:31
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -23,9 +23,8 @@
23 23  
24 24  = 3. Support End Node and firmware version =
25 25  
26 -
27 -(% border="1" style="background-color:#ffffcc; color:green; width:995.222px" %)
28 -|=(% colspan="3" style="width: 992px;" %) Dragino STM32 base hardware Firmware / LoRaWAN stack list
26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
29 29  |(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
30 30  |(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
31 31  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
... ... @@ -47,11 +47,11 @@
47 47  
48 48  (% class="box infomessage" %)
49 49  (((
50 -AT Command: AT+TDC
49 +**AT Command: AT+TDC**
51 51  )))
52 52  
53 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
54 -|=(% colspan="3" style="width: 724px;" %) AT+TDC
52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %)
53 +|=(% colspan="3" style="width: 724px;" %)AT+TDC
55 55  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
56 56  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
57 57  OK
... ... @@ -62,7 +62,9 @@
62 62  Set transmit interval to 60000ms = 60 seconds
63 63  )))
64 64  
64 +{{info}}
65 65  **Downlink Command: 0x01**
66 +{{/info}}
66 66  
67 67  Format: Command Code (0x01) followed by 3 bytes time value.
68 68  
... ... @@ -76,13 +76,12 @@
76 76  Feature: Reboot End Node to perform a new OTAA or ABP Join.
77 77  
78 78  {{info}}
79 -AT Command: ATZ
80 +**AT Command: ATZ**
80 80  {{/info}}
81 81  
82 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 -|=(% colspan="3" %) ATZ: Trig a reset of the MCU
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
84 +|=(% colspan="3" %)ATZ: Trig a reset of the MCU
84 84  |**Command Example**|**Function**|**Response**
85 -~)~)~)
86 86  |ATZ|Reset MCU|(((
87 87  Device reset and show booting info
88 88  
... ... @@ -97,35 +97,46 @@
97 97  <followed by the Tx and Rx information>
98 98  )))
99 99  
100 -Downlink Command: 0x04
100 +{{info}}
101 +**Downlink Command: 0x04**
102 +{{/info}}
101 101  
102 102  Format: Command Code (0x04) followed by FF.
103 103  
104 -If the downlink payload=04FF, the end node will reboot.
106 +If the downlink payload=**04FF**, the end node will reboot.
105 105  
106 106  == 4.3 Reset to factory Default ==
107 107  
108 108  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
109 109  
110 -AT Command: AT+FDR
112 +{{info}}
113 +**AT Command: AT+FDR**
114 +{{/info}}
111 111  
112 -|=(% colspan="3" %)Reset to factory default
113 -|**Command Example**|**Function**|**Response**
114 -|AT+FDR|Reset to factory default|Device reset to factory default parameters and show booting info
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
117 +|=(% colspan="3" style="width: 828px;" %)Reset to factory default
118 +|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
119 +|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
120 +Device reset to factory default parameters and show booting info
115 115  
116 -{{{LSN50 Device/LoRa ST Module
122 +LSN50 Device/LoRa ST Module
123 +
117 117  Image Version: XX
125 +
118 118  Frequency Band: XX
127 +
119 119  DevEui= XX XX XX XX XX XX XX XX
129 +
120 120  Please set the parameters or reset Device to apply change
121 -}}}
131 +)))
122 122  
133 +{{info}}
134 +**Downlink Command: 0x04**
135 +{{/info}}
123 123  
124 -Downlink Command: 0x04
125 -
126 126  Format: Command Code (0x04) followed by FE.
127 127  
128 -If the downlink payload=04FE, Reset Parameters to Factory Default, Keys Reserve.
139 +If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
129 129  
130 130  
131 131  == 4.4 Show Firmware Version ==
... ... @@ -132,30 +132,34 @@
132 132  
133 133  Feature: Show firmware version. No downlink command yet.
134 134  
135 -AT Command: AT+VER
146 +{{info}}
147 +**AT Command: AT+VER**
148 +{{/info}}
136 136  
150 +(% style="background-color:#ffffcc; color:green" %)
137 137  |=(% colspan="3" %)AT+VER: Image Version and Frequency Band
138 138  |**Command Example**|**Function**|**Response**
139 -|AT+VER=?|Show Image version and Frequency Band|
153 +|AT+VER=?|Show Image version and Frequency Band|(((
154 +1.3 EU868
140 140  
141 -{{{1.3 EU868
142 142  OK
143 -}}}
157 +)))
144 144  
159 +{{info}}
160 +**Downlink Command: 0x26 (Valid in 006 stack)**
161 +{{/info}}
145 145  
146 -Downlink Command: 0x26 (Valid in 006 stack)
147 -
148 148  Downlink Format: 0x26
149 149  
150 150  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
151 151  
152 -xx: Software Type:
167 +**xx: Software Type:**
153 153  
154 154  * 0x00 01: LGT92 Version
155 155  * 0x00 02: LBT1
156 156  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
157 157  
158 -yy: Frequency Band:
173 +**yy: Frequency Band:**
159 159  
160 160  * 0x01: EU868
161 161  * 0x02: US915
... ... @@ -168,7 +168,7 @@
168 168  * 0x09: AS923-2
169 169  * 0xa0: AS923-3
170 170  
171 -zz: Subband
186 +**zz: Subband**
172 172  
173 173  firmware version: v1.1.0 ~-~-> 110
174 174  
... ... @@ -177,21 +177,27 @@
177 177  
178 178  Feature: Show All configure. No downlink command yet.
179 179  
180 -AT Command: AT+CFG
195 +{{info}}
196 +**AT Command: AT+CFG**
197 +{{/info}}
181 181  
182 -|=(% colspan="3" %)AT+CFG: Print all configurations
183 -|**Command Example**|**Function**|**Response**
184 -|AT+CFG|Show all configures|
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
200 +|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
201 +|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
202 +|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
203 +AT+DEUI = XX XX XX XX XX XX XX XX
185 185  
186 -{{{AT+DEUI = XX XX XX XX XX XX XX XX
187 187  AT+DADDR=XXXXXXXX
206 +
188 188  ……….
208 +
189 189  AT+RX2WTO=X
210 +
190 190  AT+CHS=868100000
212 +
191 191  OK
192 -}}}
214 +)))
193 193  
194 -
195 195  = 5. Keys, IDs and EUIs management =
196 196  
197 197  == 5.1 Application EUI ==
... ... @@ -198,40 +198,49 @@
198 198  
199 199  Feature: Get or Set the Application EUI.
200 200  
201 -AT Command: AT+APPEUI
222 +{{info}}
223 +**AT Command: AT+APPEUI**
224 +{{/info}}
202 202  
203 -|=(% colspan="3" %)AT+APPEUI
204 -|**Command Example**|**Function**|**Response**
205 -|AT+APPEUI=?|Get the Application EUI|00 b3 d5 00 00 00 00 00(((
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
227 +|=(% colspan="3" style="width: 683px;" %)AT+APPEUI
228 +|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
229 +|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
206 206  OK
207 207  )))
208 -|AT+APPEUI=00 b3 d5 7e f0 00 4d 34|Set the Application EUI|OK
232 +|(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
209 209  
210 210  == 5.2 Application Key ==
211 211  
212 212  Feature: Get or Set the Application Key.
213 213  
214 -AT Command: AT+APPKEY
238 +{{info}}
239 +**AT Command: AT+APPKEY**
240 +{{/info}}
215 215  
216 -|=(% colspan="3" %)AT+APPKEY
217 -|**Command Example**|**Function**|**Response**
218 -|AT+APPKEY=?|Get the Application Key|00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
243 +|=(% colspan="3" style="width: 973px;" %)AT+APPKEY
244 +|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
245 +|(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
219 219  OK
220 220  )))
221 -|AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|Set the Application Key.|OK
248 +|(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
222 222  
223 223  == 5.3 Application Session Key ==
224 224  
225 225  Feature: Get or Set the Application Session Key.
226 226  
227 -AT Command: AT+APPSKEY
254 +{{info}}
255 +**AT Command: AT+APPSKEY**
256 +{{/info}}
228 228  
229 -|=(% colspan="3" %)AT+APPSKEY
230 -|**Command Example**|**Function**|**Response**
231 -|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
259 +|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
260 +|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
261 +|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
232 232  OK
233 233  )))
234 -|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)(((
264 +|(% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)(((
235 235  OK
236 236  )))
237 237  
... ... @@ -239,29 +239,35 @@
239 239  
240 240  Feature: Get or Set the Device Address.
241 241  
242 -AT Command: AT+DADDR
272 +{{info}}
273 +**AT Command: AT+DADDR**
274 +{{/info}}
243 243  
244 -|=(% colspan="3" %)AT+DADDR
245 -|**Command Example**|**Function**|**Response**
246 -|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)(((
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
277 +|=(% colspan="3" style="width: 792px;" %)AT+DADDR
278 +|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
279 +|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
247 247  A8 40 41 FF
248 248  
249 249  OK
250 250  )))
251 -|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK
284 +|(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
252 252  
253 253  == 5.5 Device EUI ==
254 254  
255 255  Feature: Get or Set the Device EUI.
256 256  
257 -AT Command: AT+DEUI
290 +{{info}}
291 +**AT Command: AT+DEUI**
292 +{{/info}}
258 258  
259 -|=(% colspan="3" %)AT+DEUI
260 -|**Command Example**|**Function**|**Response**
261 -|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55(((
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
295 +|=(% colspan="3" style="width: 1032px;" %)AT+DEUI
296 +|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
297 +|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
262 262  OK
263 263  )))
264 -|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((
300 +|(% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((
265 265  OK
266 266  )))
267 267  
... ... @@ -269,27 +269,33 @@
269 269  
270 270  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
271 271  
272 -AT Command: AT+NWKID
308 +{{info}}
309 +**AT Command: AT+NWKID**
310 +{{/info}}
273 273  
274 -|=(% colspan="3" %)AT+NWKID
275 -|**Command Example**|**Function**|**Response**
276 -|AT+NWKID=?|Get the Network ID.|a8 40 41 ff(((
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
313 +|=(% colspan="3" style="width: 445px;" %)AT+NWKID
314 +|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
315 +|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
277 277  OK
278 278  )))
279 -|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK
318 +|(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
280 280  
281 281  == 5.7 Network Session Key ==
282 282  
283 283  Feature: Get or Set the Network Session Key
284 284  
285 -AT Command: AT+NWKSKEY
324 +{{info}}
325 +**AT Command: AT+NWKSKEY**
326 +{{/info}}
286 286  
287 -|=(% colspan="3" %)AT+NWKSKEY
288 -|**Command Example**|**Function**|**Response**
289 -|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
329 +|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
330 +|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
331 +|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
290 290  OK
291 291  )))
292 -|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK
334 +|(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
293 293  
294 294  = 6. Joining and sending date on LoRaWAN network =
295 295  
... ... @@ -297,15 +297,18 @@
297 297  
298 298  Feature: Get or Set the confirmation mode (0-1).
299 299  
300 -AT Command: AT+CFM
342 +{{info}}
343 +**AT Command: AT+CFM**
344 +{{/info}}
301 301  
302 -|=(% colspan="3" %)AT+CFM
303 -|**Command Example**|**Function**|**Response**
304 -|AT+CFM=?|Get the confirmation mode|0(((
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
347 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
348 +|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
349 +|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
305 305  OK
306 306  )))
307 -|AT+CFM=1|Set the confirmation mode|OK
308 -|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR
352 +|(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
353 +|(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
309 309  
310 310  Downlink Command: 0x05
311 311  
... ... @@ -320,11 +320,14 @@
320 320  
321 321  Feature: Get confirmation status of the last AT+SEND (0-1).
322 322  
323 -AT Command: AT+CFS
368 +{{info}}
369 +**AT Command: AT+CFS**
370 +{{/info}}
324 324  
325 -|=(% colspan="3" %)AT+CFS
326 -|**Command Example**|**Function**|**Response**
327 -|AT+CFS=?|Get confirmation status|0(((
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
373 +|=(% colspan="3" style="width: 531px;" %)AT+CFS
374 +|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
375 +|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
328 328  OK
329 329  )))
330 330  
... ... @@ -332,11 +332,14 @@
332 332  
333 333  Feature: Join network.
334 334  
335 -AT Command: AT+JOIN
383 +{{info}}
384 +**AT Command: AT+JOIN**
385 +{{/info}}
336 336  
337 -|=(% colspan="3" %)AT+JOIN
338 -|**Command Example**|**Function**|**Response**
339 -|AT+JOIN ?|Get imformation.|AT+JOIN: Join network(((
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
388 +|=(% colspan="3" style="width: 644px;" %)AT+JOIN
389 +|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
390 +|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
340 340  OK
341 341  
342 342  While Error in format, return AT_BUSY_ERROR
... ... @@ -346,34 +346,42 @@
346 346  
347 347  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
348 348  
349 -AT Command: AT+NJM
400 +{{info}}
401 +**AT Command: AT+NJM**
402 +{{/info}}
350 350  
351 -|=(% colspan="3" %)AT+NJM
352 -|**Command Example**|**Function**|**Response**
353 -|AT+NJM=?|Get the Network Join Mode|1(((
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
405 +|=(% colspan="3" style="width: 750px;" %)AT+NJM
406 +|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
407 +|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
354 354  OK
355 355  )))
356 -|AT+NJM=0|Set the Network Join Mode|OK
357 -|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR
410 +|(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
411 +|(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
358 358  
359 -Downlink Command: 0x20
413 +{{info}}
414 +**Downlink Command: 0x20**
415 +{{/info}}
360 360  
361 361  Format: Command Code (0x20) followed by 1 bytes mode value.
362 362  
363 363  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
364 364  
365 -* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O
366 -* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1
421 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
422 +* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
367 367  
368 368  == 6.5 LoRa® Network Join Status ==
369 369  
370 370  Feature: LoRa® Network Join Status.
371 371  
372 -AT Command: AT+NJS
428 +{{info}}
429 +**AT Command: AT+NJS**
430 +{{/info}}
373 373  
374 -|=(% colspan="3" %)AT+NJS
375 -|**Command Example**|**Function**|**Response**
376 -|AT+NJS=?|Get the join status.|0(((
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
433 +|=(% colspan="3" style="width: 495px;" %)AT+NJS
434 +|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
435 +|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
377 377  OK
378 378  )))
379 379  
... ... @@ -381,11 +381,14 @@
381 381  
382 382  Feature: Print Last Received Data in Raw Format<port:data>.
383 383  
384 -AT Command: AT+RECV
443 +{{info}}
444 +**AT Command: AT+RECV**
445 +{{/info}}
385 385  
386 -|=(% colspan="3" %)AT+RECV
387 -|**Command Example**|**Function**|**Response**
388 -|AT+RECV=?|print last received data in raw format.|0:(((
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
448 +|=(% colspan="3" style="width: 584px;" %)AT+RECV
449 +|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
450 +|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
389 389  OK
390 390  )))
391 391  
... ... @@ -393,11 +393,14 @@
393 393  
394 394  Feature: Print Last Received Data in Binary Format<port:data>.
395 395  
396 -AT Command: AT+RECVB
458 +{{info}}
459 +**AT Command: AT+RECVB**
460 +{{/info}}
397 397  
398 -|=(% colspan="3" %)AT+RECVB
399 -|**Command Example**|**Function**|**Response**
400 -|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010(((
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
463 +|=(% colspan="3" style="width: 790px;" %)AT+RECVB
464 +|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
465 +|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
401 401  OK
402 402  )))
403 403  
... ... @@ -405,11 +405,14 @@
405 405  
406 406  Feature: Send Text Data<port:data>.
407 407  
408 -AT Command: AT+SEND
473 +{{info}}
474 +**AT Command: AT+SEND**
475 +{{/info}}
409 409  
410 -|=(% colspan="3" %)AT+SEND
411 -|**Command Example**|**Function**|**Response**
412 -|AT+SEND=12:hello world|Send text data along with the application port.|OK(((
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
478 +|=(% colspan="3" style="width: 988px;" %)AT+SEND
479 +|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
480 +|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
413 413  While Error in format, return
414 414  
415 415  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
... ... @@ -421,12 +421,15 @@
421 421  
422 422  Feature: Send hexadecimal data along with the application port.
423 423  
424 -AT Command: AT+SENDB
492 +{{info}}
493 +**AT Command: AT+SENDB**
494 +{{/info}}
425 425  
426 -|=(% colspan="3" %)AT+SENDB
427 -|**Command Example**|**Function**|**Response**
428 -|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK
429 -|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return(((
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
497 +|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
498 +|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
499 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
500 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
430 430  AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
431 431  
432 432  
... ... @@ -438,39 +438,46 @@
438 438  
439 439  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
440 440  
512 +{{info}}
513 +**AT Command: AT+ADR**
514 +{{/info}}
441 441  
442 -AT Command: AT+ADR
443 -
444 -|=(% colspan="3" %)AT+ADR
445 -|**Command Example**|**Function**|**Response**
446 -|AT+ADR=?|Get the Adaptive Data Rate setting.|1(((
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
517 +|=(% colspan="3" style="width: 680px;" %)AT+ADR
518 +|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
519 +|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
447 447  OK
448 448  )))
449 -|AT+ADR=0|Set the Adaptive Data Rate setting.|OK
450 -|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return(((
522 +|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK
523 +|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((
451 451  AT_PARAM_ERROR
452 452  )))
453 453  
454 -Downlink Command: 0x22
527 +{{info}}
528 +**Downlink Command: 0x22**
529 +{{/info}}
455 455  
456 456  
457 457  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
458 458  
459 -* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1.
460 -* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0.
534 +* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
535 +* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
461 461  
462 462  == 7.2 LoRa® Class ==
463 463  
464 464  Feature: Get or Set the Device Class(Currently only support class A, class C).
465 465  
466 -AT Command:AT+CLASS
541 +{{info}}
542 +**AT Command:AT+CLASS**
543 +{{/info}}
467 467  
468 -|=(% colspan="3" %)AT+CLASS
469 -|**Command Example**|**Function**|**Response**
470 -|AT+CLASS=?|Get the Device Class.|A(((
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
546 +|=(% colspan="3" style="width: 504px;" %)AT+CLASS
547 +|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
548 +|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
471 471  OK
472 472  )))
473 -|AT+CLASS=C|Set the Device Class.|OK(((
551 +|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((
474 474  
475 475  )))
476 476  
... ... @@ -478,14 +478,17 @@
478 478  
479 479  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
480 480  
481 -AT Command:AT+DCS
559 +{{info}}
560 +**AT Command:AT+DCS**
561 +{{/info}}
482 482  
483 -|=(% colspan="3" %)AT+DCS
484 -|**Command Example**|**Function**|**Response**
485 -|AT+DCS=?|Get the ETSI Duty Cycle setting.|1(((
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
564 +|=(% colspan="3" style="width: 512px;" %)AT+DCS
565 +|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
566 +|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
486 486  OK
487 487  )))
488 -|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK(((
569 +|(% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((
489 489  
490 490  )))
491 491  
... ... @@ -493,37 +493,45 @@
493 493  
494 494  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
495 495  
496 -AT Command: AT+DR
577 +{{info}}
578 +**AT Command: AT+DR**
579 +{{/info}}
497 497  
498 -|=(% colspan="3" %)AT+DR
499 -|**Command Example**|**Function**|**Response**
500 -|AT+DR=?|Get the Data Rate.|5(((
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
582 +|=(% colspan="3" style="width: 463px;" %)AT+DR
583 +|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
584 +|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
501 501  OK
502 502  )))
503 -|AT+DR=2|Set the Data Rate.|OK(((
587 +|(% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((
504 504  
505 505  )))
506 506  
507 -Downlink Command: 0x2200aaFF
591 +{{info}}
592 +**Downlink Command: 0x2200aaFF**
593 +{{/info}}
508 508  
509 509  
510 510  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
511 511  
512 -* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1.
513 -* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0.
598 +* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
599 +* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
514 514  
515 515  == 7.5 Frame Counter Downlink ==
516 516  
517 517  Feature: Get or Set the Frame Counter Downlink.
518 518  
519 -AT Command:AT+FCD
605 +{{info}}
606 +**AT Command:AT+FCD**
607 +{{/info}}
520 520  
521 -|=(% colspan="3" %)AT+FCD
522 -|**Command Example**|**Function**|**Response**
523 -|AT+FCD=?|Get the Frame Counter Downlink.|0(((
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
610 +|=(% colspan="3" style="width: 690px;" %)AT+FCD
611 +|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
612 +|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
524 524  OK
525 525  )))
526 -|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)(((
615 +|(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
527 527  OK
528 528  
529 529  
... ... @@ -533,14 +533,17 @@
533 533  
534 534  Feature: Get or Set the Frame Counter Uplink.
535 535  
536 -AT Command:AT+FCU
625 +{{info}}
626 +**AT Command:AT+FCU**
627 +{{/info}}
537 537  
538 -|=(% colspan="3" %)AT+FCU
539 -|**Command Example**|**Function**|**Response**
540 -|AT+FCU=?|Get the Frame Counter Uplink.|0(((
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
630 +|=(% colspan="3" style="width: 531px;" %)AT+FCU
631 +|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
632 +|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
541 541  OK
542 542  )))
543 -|AT+FCU=10|Set the Frame Counter Uplink.|OK(((
635 +|(% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((
544 544  
545 545  )))
546 546  
... ... @@ -548,14 +548,17 @@
548 548  
549 549  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
550 550  
551 -AT Command:AT+JN1DL
643 +{{info}}
644 +**AT Command:AT+JN1DL**
645 +{{/info}}
552 552  
553 -|=(% colspan="3" %)AT+JN1DL
554 -|**Command Example**|**Function**|**Response**
555 -|AT+JN1DL=?|Get the Join Accept Delay.|5000(((
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
648 +|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
649 +|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
650 +|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
556 556  OK
557 557  )))
558 -|AT+JN1DL=10000|Set the Join Accept Delay.|OK(((
653 +|(% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((
559 559  
560 560  )))
561 561  
... ... @@ -563,14 +563,17 @@
563 563  
564 564  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
565 565  
566 -AT Command:AT+JN2DL
661 +{{info}}
662 +**AT Command:AT+JN2DL**
663 +{{/info}}
567 567  
568 -|=(% colspan="3" %)AT+JN2DL
569 -|**Command Example**|**Function**|**Response**
570 -|AT+JN2DL=?|Get the Join Accept Delay.|6000(((
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
666 +|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
667 +|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
668 +|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
571 571  OK
572 572  )))
573 -|AT+JN2DL=20000|Set the Join Accept Delay.|OK(((
671 +|(% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((
574 574  
575 575  )))
576 576  
... ... @@ -578,14 +578,17 @@
578 578  
579 579  Feature: Get or Set the public network mode. (0: off, 1: on)
580 580  
581 -AT Command:AT+PNM
679 +{{info}}
680 +**AT Command:AT+PNM**
681 +{{/info}}
582 582  
583 -|=(% colspan="3" %)AT+PNM
584 -|**Command Example**|**Function**|**Response**
585 -|AT+PNM=?|Get the public network mode.|1(((
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
684 +|=(% colspan="3" style="width: 664px;" %)AT+PNM
685 +|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
686 +|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
586 586  OK
587 587  )))
588 -|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)(((
689 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
589 589  OK
590 590  
591 591  
... ... @@ -595,14 +595,17 @@
595 595  
596 596  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
597 597  
598 -AT Command:AT+RX1DL
699 +{{info}}
700 +**AT Command:AT+RX1DL**
701 +{{/info}}
599 599  
600 -|=(% colspan="3" %)AT+RX1DL
601 -|**Command Example**|**Function**|**Response**
602 -|AT+RX1DL=?|Get the delay.|1000(((
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
704 +|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
705 +|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
706 +|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
603 603  OK
604 604  )))
605 -|AT+RX1DL=1500|Set the delay.|OK(((
709 +|(% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((
606 606  
607 607  )))
608 608  
... ... @@ -610,14 +610,17 @@
610 610  
611 611  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
612 612  
613 -AT Command:AT+RX2DL
717 +{{info}}
718 +**AT Command:AT+RX2DL**
719 +{{/info}}
614 614  
615 -|=(% colspan="3" %)AT+RX2DL
616 -|**Command Example**|**Function**|**Response**
617 -|AT+RX2DL=?|Get the delay.|2000(((
721 +(% style="background-color:#ffffcc; color:green; width:481.222px" %)
722 +|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
723 +|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
724 +|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
618 618  OK
619 619  )))
620 -|AT+RX2DL=2500|Set the delay.|OK(((
727 +|(% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((
621 621  
622 622  )))
623 623  
... ... @@ -625,14 +625,17 @@
625 625  
626 626  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
627 627  
628 -AT Command:AT+RX2DR
735 +{{info}}
736 +**AT Command:AT+RX2DR**
737 +{{/info}}
629 629  
630 -|=(% colspan="3" %)AT+RX2DR
631 -|**Command Example**|**Function**|**Response**
632 -|AT+RX2DR=?|Get the Rx2 window data rate.|2(((
739 +(% style="background-color:#ffffcc; color:green; width:525.222px" %)
740 +|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
741 +|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
742 +|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
633 633  OK
634 634  )))
635 -|AT+RX2DR=6|Set the Rx2 window data rate.|OK(((
745 +|(% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((
636 636  
637 637  )))
638 638  
... ... @@ -640,14 +640,17 @@
640 640  
641 641  Feature: Get or Set the Rx2 window frequency
642 642  
643 -AT Command:AT+RX2FQ
753 +{{info}}
754 +**AT Command:AT+RX2FQ**
755 +{{/info}}
644 644  
645 -|=(% colspan="3" %)AT+RX2FQ
646 -|**Command Example**|**Function**|**Response**
647 -|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000(((
757 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
758 +|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
759 +|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
760 +|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
648 648  OK
649 649  )))
650 -|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK(((
763 +|(% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((
651 651  
652 652  )))
653 653  
... ... @@ -655,14 +655,17 @@
655 655  
656 656  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
657 657  
658 -AT Command:AT+TXP
771 +{{info}}
772 +**AT Command:AT+TXP**
773 +{{/info}}
659 659  
660 -|=(% colspan="3" %)AT+TXP
661 -|**Command Example**|**Function**|**Response**
662 -|AT+TXP=?|Get the Transmit Power.|0(((
775 +(% style="background-color:#ffffcc; color:green; width:465.222px" %)
776 +|=(% colspan="3" style="width: 462px;" %)AT+TXP
777 +|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
778 +|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
663 663  OK
664 664  )))
665 -|AT+TXP=1|Set the Transmit Power.|OK(((
781 +|(% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((
666 666  
667 667  )))
668 668  
... ... @@ -670,18 +670,21 @@
670 670  
671 671  If the downlink payload=22000100, it means setting the TXP to 0.
672 672  
673 -* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2.
674 -* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0.
789 +* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
790 +* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
675 675  
676 676  == 7.15 RSSI of the Last Received Packet ==
677 677  
678 678  Feature: Get or Set the Rx2 window frequency
679 679  
680 -AT Command:AT+RSSI
796 +{{info}}
797 +**AT Command:AT+RSSI**
798 +{{/info}}
681 681  
682 -|=(% colspan="3" %)AT+RSSI
683 -|**Command Example**|**Function**|**Response**
684 -|AT+RSSI=?|Get the RSSI of the last received packet.|0(((
800 +(% style="background-color:#ffffcc; color:green; width:557.222px" %)
801 +|=(% colspan="3" style="width: 554px;" %)AT+RSSI
802 +|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
803 +|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
685 685  OK
686 686  )))
687 687  
... ... @@ -689,11 +689,14 @@
689 689  
690 690  Feature: Get the SNR of the last received packet
691 691  
692 -AT Command:AT+SNR
811 +{{info}}
812 +**AT Command:AT+SNR**
813 +{{/info}}
693 693  
694 -|=(% colspan="3" %)AT+SNR
695 -|**Command Example**|**Function**|**Response**
696 -|AT+SNR=?|Get the RSSI of the last received packet.|0(((
815 +(% style="background-color:#ffffcc; color:green; width:571.222px" %)
816 +|=(% colspan="3" style="width: 568px;" %)AT+SNR
817 +|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
818 +|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
697 697  OK
698 698  )))
699 699  
... ... @@ -701,73 +701,89 @@
701 701  
702 702  Feature: Get or set the application port.
703 703  
704 -AT Command: AT+PORT
826 +{{info}}
827 +**AT Command: AT+PORT**
828 +{{/info}}
705 705  
706 -|=(% colspan="3" %)AT+PORT
707 -|**Command Example**|**Function**|**Response**
708 -|AT+PORT=?|Get the application port|21(((
830 +(% style="background-color:#ffffcc; color:green; width:500.222px" %)
831 +|=(% colspan="3" style="width: 497px;" %)AT+PORT
832 +|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
833 +|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
709 709  OK
710 710  )))
711 -|AT+PORT=21|Set the application port|OK
836 +|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
712 712  
713 -Downlink Command: 0x23
838 +{{info}}
839 +**Downlink Command: 0x23**
840 +{{/info}}
714 714  
715 715  Format: Command Code (0x23) followed by 1 bytes port value.
716 716  
717 717  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
718 718  
719 -* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1
720 -* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5
846 +* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
847 +* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
721 721  
722 722  == 7.18 Single Channel Mode ==
723 723  
724 724  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
725 725  
726 -AT Command: AT+CHS
853 +{{info}}
854 +**AT Command: AT+CHS**
855 +{{/info}}
727 727  
728 -|=(% colspan="3" %)AT+CHS
729 -|**Command Example**|**Function**|**Response**
730 -|AT+CHS=?|Get Frequency for Single Channel Mode|0(((
857 +(% style="background-color:#ffffcc; color:green; width:603.222px" %)
858 +|=(% colspan="3" style="width: 600px;" %)AT+CHS
859 +|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
860 +|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
731 731  OK
732 732  )))
733 -|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK
863 +|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
734 734  
735 735  == 7.19 Eight Channel Mode ==
736 736  
737 737  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
738 738  
739 -AT Command: AT+CHE
869 +{{info}}
870 +**AT Command: AT+CHE**
871 +{{/info}}
740 740  
741 -|=(% colspan="3" %)AT+CHE
742 -|**Command Example**|**Function**|**Response**
743 -|AT+CHE=?|Get eight channels mode|1(((
873 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
874 +|=(% colspan="3" style="width: 707px;" %)AT+CHE
875 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
876 +|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
744 744  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
745 745  
746 746  OK
747 747  )))
748 -|AT+CHE=1|Set eight channels mode|OK
881 +|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
749 749  
750 -Downlink Command: 0x24
883 +{{info}}
884 +**Downlink Command: 0x24**
885 +{{/info}}
751 751  
752 752  Format: Command Code (0x24) followed by 1 bytes channel value.
753 753  
754 754  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
755 755  
756 -* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1
757 -* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5
891 +* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
892 +* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
758 758  
759 759  == 7.20 Get or Set RXwindows1 timeout ==
760 760  
761 761  Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
762 762  
763 -AT Command: AT+RX1WTO
898 +{{info}}
899 +**AT Command: AT+RX1WTO**
900 +{{/info}}
764 764  
765 -|=(% colspan="3" %)AT+ RX1WTO
766 -|**Command Example**|**Function**|**Response**
767 -|AT+RX1WTO=?|Get RXwindows1 timeout|14(((
902 +(% style="background-color:#ffffcc; color:green; width:460.222px" %)
903 +|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
904 +|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
905 +|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
768 768  OK
769 769  )))
770 -|AT+RX1WTO=60|Set RXwindows1 timeout|OK
908 +|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
771 771  
772 772  AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
773 773  

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0