Summary

• Page properties (1 modified, 0 added, 0 removed)
• Attachments (0 modified, 2 added, 0 removed)
  • image-20220511120050-1.png
  • image-20220526162535-1.png

Details

Page properties

Content

...	...	@@ -1,57 +1,121 @@
1		-Contens
	1	+ **Table of** **Contents：**
2	2
3	3	{{toc/}}
4	4
5	5
	6	+
6	6	= 1. Introduction =
7	7
	9	+
8	8	Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
9	9
10	10	* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
11	11	* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
12	12
	15	+(((
13	13	**This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
14	14
	18	+)))
15	15
16	16	= 2. How to use AT Commands or Downlink command =
17	17
	22	+
18	18	* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
19	19	* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
20		-** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21		-** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22		-** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
	25	+** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
	26	+** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
	27	+** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
23	23
	29	+
	30	+
24	24	= 3. Support End Node and firmware version =
25	25
26	26
27		-(% border="1" style="background-color:#ffffcc; color:green; width:995.222px" %)
28		-|=(% colspan="3" style="width: 992px;" %) Dragino STM32 base hardware Firmware / LoRaWAN stack list
29		-|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
30		-|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
	34	+(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
	35	+|=(% colspan="3" style="width: 963px;" %)(((
	36	+Dragino STM32 base hardware Firmware / LoRaWAN stack list
	37	+)))
	38	+|(% style="width:187px" %)(((
	39	+**Model**
	40	+)))|(% style="width:330px" %)(((
	41	+**Description**
	42	+)))|(% style="width:445px" %)(((
	43	+**Firmware Version <~-~-> Stack Version**
	44	+)))
	45	+|(% style="width:187px" %)(((
	46	+[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
	47	+)))|(% style="width:330px" %)(((
	48	+Open Source Generic LoRaWAN Sensor Node
	49	+)))|(% style="width:445px" %)(((
	50	+(((
	51	+LSN50 v1.6.0 <~-~-> DR-LWS-003;
	52	+)))
	53	+
	54	+(((
	55	+(((
31	31	LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
32	32	)))
33		-|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
	58	+)))
	59	+)))
	60	+|(% style="width:187px" %)(((
	61	+[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
	62	+)))|(% style="width:330px" %)(((
	63	+LoRaWAN GPS Tracker
	64	+)))|(% style="width:445px" %)(((
	65	+(((
	66	+LGT92 v1.6.3 <~-~-> DR-LWS-003;
	67	+)))
	68	+
	69	+(((
	70	+(((
34	34	LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
35	35	)))
36		-|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
37		-|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
38		-|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
	73	+)))
	74	+)))
	75	+|(% style="width:187px" %)(((
	76	+[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
	77	+)))|(% style="width:330px" %)(((
	78	+LoRaWAN BLE Indoor Tracker
	79	+)))|(% style="width:445px" %)(((
	80	+LBT1 v1.0 <~-~-> DR-LWS-005;
	81	+)))
	82	+|(% style="width:187px" %)(((
	83	+[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
	84	+)))|(% style="width:330px" %)(((
	85	+LoRaWAN RS485 Modbus Converter
	86	+)))|(% style="width:445px" %)(((
	87	+RS485-LN v1.3 <~-~-> DR-LWS-005;
	88	+)))
	89	+|(% style="width:187px" %)(((
	90	+[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
	91	+)))|(% style="width:330px" %)(((
	92	+LoRaWAN Temperature & Humidity Sensor
	93	+)))|(% style="width:445px" %)(((
	94	+(((
	95	+LHT65 v1.7 <~-~-> DR-LWS-003;
	96	+)))
	97	+
	98	+(((
	99	+(((
39	39	LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
40	40	)))
	102	+)))
	103	+)))
41	41
	105	+
42	42	= 4. System Management Commands =
43	43
	108	+
44	44	== 4.1 Change Uplink Interval ==
45	45
	111	+
46	46	Feature: Change LoRaWAN End Node Transmit Interval.
47	47
48		-(% class="box infomessage" %)
49		-(((
50		-AT Command: AT+TDC
51		-)))
52	52
	115	+(% style="color:blue" %)**AT Command: AT+TDC**
	116	+
53	53	(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
54		-|=(% colspan="3" style="width: 724px;" %) AT+TDC
	118	+|=(% colspan="3" style="width: 724px;" %)AT+TDC
55	55	|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
56	56	|(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
57	57	OK
...	...	@@ -62,27 +62,34 @@
62	62	Set transmit interval to 60000ms = 60 seconds
63	63	)))
64	64
65		-**Downlink Command: 0x01**
	129	+(((
	130	+
66	66
	132	+(% style="color:blue" %)**Downlink Command: 0x01**
	133	+
67	67	Format: Command Code (0x01) followed by 3 bytes time value.
	135	+)))
68	68
	137	+(((
69	69	If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
	139	+)))
70	70
71	71	* **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
72	72	* **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
73	73
	144	+
	145	+
74	74	== 4.2 Reboot End Node ==
75	75
	148	+
76	76	Feature: Reboot End Node to perform a new OTAA or ABP Join.
77	77
78		-{{info}}
79		-AT Command: ATZ
80		-{{/info}}
81	81
	152	+(% style="color:blue" %)**AT Command: ATZ**
	153	+
82	82	(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83		-|=(% colspan="3" %) ATZ: Trig a reset of the MCU
	155	+|=(% colspan="3" %)ATZ: Trig a reset of the MCU
84	84	|**Command Example**|**Function**|**Response**
85		-~)~)~)
86	86	|ATZ|Reset MCU|(((
87	87	Device reset and show booting info
88	88
...	...	@@ -97,66 +97,102 @@
97	97	<followed by the Tx and Rx information>
98	98	)))
99	99
100		-Downlink Command: 0x04
101	101
	172	+(% style="color:blue" %)**Downlink Command: 0x04**
	173	+
	174	+(((
102	102	Format: Command Code (0x04) followed by FF.
	176	+)))
103	103
104		-If the downlink payload=04FF, the end node will reboot.
	178	+(((
	179	+If the downlink payload=**04FF**, the end node will reboot.
105	105
	181	+
	182	+)))
	183	+
106	106	== 4.3 Reset to factory Default ==
107	107
	186	+
108	108	Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
109	109
110		-AT Command: AT+FDR
111	111
112		-|=(% colspan="3" %)Reset to factory default
113		-|**Command Example**|**Function**|**Response**
114		-|AT+FDR|Reset to factory default|Device reset to factory default parameters and show booting info
	190	+(% style="color:blue" %)**AT Command: AT+FDR**
115	115
116		-{{{LSN50 Device/LoRa ST Module
	192	+(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
	193	+|=(% colspan="3" style="width: 828px;" %)Reset to factory default
	194	+|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
	195	+|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
	196	+Device reset to factory default parameters and show booting info
	197	+
	198	+LSN50 Device/LoRa ST Module
	199	+
117	117	Image Version: XX
	201	+
118	118	Frequency Band: XX
	203	+
119	119	DevEui= XX XX XX XX XX XX XX XX
	205	+
120	120	Please set the parameters or reset Device to apply change
121		-}}}
	207	+)))
122	122
123	123
124		-Downlink Command: 0x04
	210	+(% style="color:blue" %)**Downlink Command: 0x04**
125	125
	212	+(((
126	126	Format: Command Code (0x04) followed by FE.
	214	+)))
127	127
128		-If the downlink payload=04FE, Reset Parameters to Factory Default, Keys Reserve.
	216	+(((
	217	+If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
	218	+)))
129	129
130	130
131	131	== 4.4 Show Firmware Version ==
132	132
	223	+
133	133	Feature: Show firmware version. No downlink command yet.
134	134
135		-AT Command: AT+VER
136	136
137		-|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
138		-|**Command Example**|**Function**|**Response**
139		-|AT+VER=?|Show Image version and Frequency Band|
	227	+(% style="color:blue" %)**AT Command: AT+VER**
140	140
141		-{{{1.3 EU868
	229	+(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
	230	+|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
	231	+|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
	232	+|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
	233	+1.3 EU868
	234	+
142	142	OK
143		-}}}
	236	+)))
144	144
145	145
146		-Downlink Command: 0x26 (Valid in 006 stack)
	239	+(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
147	147
	241	+(((
148	148	Downlink Format: 0x26
	243	+)))
149	149
	245	+(((
150	150	Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
	247	+)))
151	151
152		-xx: Software Type:
	249	+(((
	250	+
153	153
	252	+
	253	+**xx: Software Type:**
	254	+)))
	255	+
154	154	* 0x00 01: LGT92 Version
155	155	* 0x00 02: LBT1
156	156	* 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
157	157
158		-yy: Frequency Band:
	260	+(((
	261	+
159	159
	263	+
	264	+**yy: Frequency Band:**
	265	+)))
	266	+
160	160	* 0x01: EU868
161	161	* 0x02: US915
162	162	* 0x03: IN865
...	...	@@ -168,147 +168,204 @@
168	168	* 0x09: AS923-2
169	169	* 0xa0: AS923-3
170	170
171		-zz: Subband
	278	+(((
	279	+
172	172
	281	+
	282	+**zz: Subband**
	283	+)))
	284	+
173	173	firmware version: v1.1.0 ~-~-> 110
174	174
175	175
176	176	== 4.5 Show System Configure ==
177	177
	290	+
178	178	Feature: Show All configure. No downlink command yet.
179	179
180		-AT Command: AT+CFG
181	181
182		-|=(% colspan="3" %)AT+CFG: Print all configurations
183		-|**Command Example**|**Function**|**Response**
184		-|AT+CFG|Show all configures|
	294	+(% style="color:blue" %)**AT Command: AT+CFG**
185	185
186		-{{{AT+DEUI = XX XX XX XX XX XX XX XX
	296	+(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
	297	+|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
	298	+|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
	299	+|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
	300	+AT+DEUI = XX XX XX XX XX XX XX XX
	301	+
187	187	AT+DADDR=XXXXXXXX
	303	+
188	188	……….
	305	+
189	189	AT+RX2WTO=X
	307	+
190	190	AT+CHS=868100000
	309	+
191	191	OK
192		-}}}
	311	+)))
193	193
194	194
	314	+
195	195	= 5. Keys, IDs and EUIs management =
196	196
	317	+
197	197	== 5.1 Application EUI ==
198	198
	320	+
199	199	Feature: Get or Set the Application EUI.
200	200
201		-AT Command: AT+APPEUI
202	202
203		-|=(% colspan="3" %)AT+APPEUI
204		-|**Command Example**|**Function**|**Response**
205		-|AT+APPEUI=?|Get the Application EUI|00 b3 d5 00 00 00 00 00(((
	324	+(% style="color:blue" %)**AT Command: AT+APPEUI**
	325	+
	326	+(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
	327	+|=(% colspan="3" style="width: 683px;" %)AT+APPEUI
	328	+|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
	329	+|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
206	206	OK
207	207	)))
208		-|AT+APPEUI=00 b3 d5 7e f0 00 4d 34|Set the Application EUI|OK
	332	+|(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
209	209
	334	+
	335	+
210	210	== 5.2 Application Key ==
211	211
	338	+
212	212	Feature: Get or Set the Application Key.
213	213
214		-AT Command: AT+APPKEY
215	215
216		-|=(% colspan="3" %)AT+APPKEY
217		-|**Command Example**|**Function**|**Response**
218		-|AT+APPKEY=?|Get the Application Key|00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
	342	+(% style="color:blue" %)**AT Command: AT+APPKEY**
	343	+
	344	+(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
	345	+|=(% colspan="3" style="width: 973px;" %)AT+APPKEY
	346	+|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
	347	+|(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
219	219	OK
220	220	)))
221		-|AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|Set the Application Key.|OK
	350	+|(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
222	222
	352	+
	353	+
223	223	== 5.3 Application Session Key ==
224	224
	356	+
225	225	Feature: Get or Set the Application Session Key.
226	226
227		-AT Command: AT+APPSKEY
228	228
229		-|=(% colspan="3" %)AT+APPSKEY
230		-|**Command Example**|**Function**|**Response**
231		-|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
	360	+(% style="color:blue" %)**AT Command: AT+APPSKEY**
	361	+
	362	+(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
	363	+|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
	364	+|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
	365	+|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
232	232	OK
233	233	)))
234		-|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)(((
	368	+|(% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)(((
235	235	OK
236	236	)))
237	237
	372	+
	373	+
238	238	== 5.4 Device Address ==
239	239
	376	+
240	240	Feature: Get or Set the Device Address.
241	241
242		-AT Command: AT+DADDR
243	243
244		-|=(% colspan="3" %)AT+DADDR
245		-|**Command Example**|**Function**|**Response**
246		-|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)(((
	380	+(% style="color:blue" %)**AT Command: AT+DADDR**
	381	+
	382	+(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
	383	+|=(% colspan="3" style="width: 792px;" %)AT+DADDR
	384	+|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
	385	+|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
247	247	A8 40 41 FF
248	248
249	249	OK
250	250	)))
251		-|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK
	390	+|(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
252	252
	392	+
	393	+
253	253	== 5.5 Device EUI ==
254	254
	396	+
255	255	Feature: Get or Set the Device EUI.
256	256
257		-AT Command: AT+DEUI
258	258
259		-|=(% colspan="3" %)AT+DEUI
260		-|**Command Example**|**Function**|**Response**
261		-|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55(((
	400	+(% style="color:blue" %)**AT Command: AT+DEUI**
	401	+
	402	+(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
	403	+|=(% colspan="3" style="width: 1032px;" %)AT+DEUI
	404	+|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
	405	+|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
262	262	OK
263	263	)))
264		-|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((
	408	+|(% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((
265	265	OK
266	266	)))
267	267
	412	+
	413	+
268	268	== 5.6 Network ID ==
269	269
	416	+
270	270	Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
271	271
272		-AT Command: AT+NWKID
273	273
274		-|=(% colspan="3" %)AT+NWKID
275		-|**Command Example**|**Function**|**Response**
276		-|AT+NWKID=?|Get the Network ID.|a8 40 41 ff(((
	420	+(% style="color:blue" %)**AT Command: AT+NWKID**
	421	+
	422	+(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
	423	+|=(% colspan="3" style="width: 445px;" %)AT+NWKID
	424	+|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
	425	+|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
277	277	OK
278	278	)))
279		-|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK
	428	+|(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
280	280
	430	+
	431	+
281	281	== 5.7 Network Session Key ==
282	282
	434	+
283	283	Feature: Get or Set the Network Session Key
284	284
285		-AT Command: AT+NWKSKEY
286	286
287		-|=(% colspan="3" %)AT+NWKSKEY
288		-|**Command Example**|**Function**|**Response**
289		-|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
	438	+(% style="color:blue" %)**AT Command: AT+NWKSKEY**
	439	+
	440	+(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
	441	+|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
	442	+|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
	443	+|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
290	290	OK
291	291	)))
292		-|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK
	446	+|(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
293	293
	448	+
	449	+
294	294	= 6. Joining and sending date on LoRaWAN network =
295	295
	452	+
296	296	== 6.1 Confirm Mode ==
297	297
	455	+
	456	+=== 6.1.1  AT+CFM command before DR-LWS007 software stack ===
	457	+
	458	+
298	298	Feature: Get or Set the confirmation mode (0-1).
299	299
300		-AT Command: AT+CFM
301	301
302		-|=(% colspan="3" %)AT+CFM
303		-|**Command Example**|**Function**|**Response**
304		-|AT+CFM=?|Get the confirmation mode|0(((
	462	+(% style="color:blue" %)**AT Command: AT+CFM**
	463	+
	464	+(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
	465	+|=(% colspan="3" style="width: 707px;" %)AT+CFM
	466	+|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
	467	+|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
305	305	OK
306	306	)))
307		-|AT+CFM=1|Set the confirmation mode|OK
308		-|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR
	470	+|(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
	471	+|(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
309	309
310		-Downlink Command: 0x05
311	311
	474	+(% style="color:blue" %)**Downlink Command: 0x05**
	475	+
312	312	Format: Command Code (0x05) followed by 2 bytes mode value.
313	313
314	314	If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
...	...	@@ -316,100 +316,187 @@
316	316	* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
317	317	* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
318	318
	483	+
	484	+
	485	+
	486	+=== 6.1.2  AT+CFM command since DR-LWS007 software stack ===
	487	+
	488	+
	489	+(% style="color:blue" %)**AT Command: AT+CFM**
	490	+
	491	+(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
	492	+|=(% colspan="3" style="width: 707px;" %)AT+CFM
	493	+|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
	494	+|(% style="width:160px" %)(((
	495	+AT+CFM=1,0,0
	496	+
	497	+value1
	498	+)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
	499	+1
	500	+
	501	+OK
	502	+)))
	503	+|(% style="width:160px" %)(((
	504	+AT+CFM=0,?,0
	505	+
	506	+value2
	507	+)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
	508	+0~~7
	509	+
	510	+OK
	511	+)))
	512	+|(% style="width:160px" %)(((
	513	+AT+CFM=0,0,1
	514	+
	515	+value3
	516	+)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
	517	+1
	518	+
	519	+OK
	520	+)))
	521	+
	522	+
	523	+(% style="color:blue" %)**Downlink Command: 0x05**
	524	+
	525	+Format: Command Code (0x05) followed by 2 bytes mode value.
	526	+
	527	+If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
	528	+
	529	+* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
	530	+* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
	531	+
	532	+
	533	+
	534	+
319	319	== 6.2 Confirm Status ==
320	320
	537	+
321	321	Feature: Get confirmation status of the last AT+SEND (0-1).
322	322
323		-AT Command: AT+CFS
324	324
325		-|=(% colspan="3" %)AT+CFS
326		-|**Command Example**|**Function**|**Response**
327		-|AT+CFS=?|Get confirmation status|0(((
	541	+(% style="color:blue" %)**AT Command: AT+CFS**
	542	+
	543	+(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
	544	+|=(% colspan="3" style="width: 531px;" %)AT+CFS
	545	+|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
	546	+|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
328	328	OK
329	329	)))
330	330
	550	+
	551	+
331	331	== 6.3 Join LoRa® Network ==
332	332
	554	+
333	333	Feature: Join network.
334	334
335		-AT Command: AT+JOIN
336	336
337		-|=(% colspan="3" %)AT+JOIN
338		-|**Command Example**|**Function**|**Response**
339		-|AT+JOIN ?|Get imformation.|AT+JOIN: Join network(((
	558	+(% style="color:blue" %)**AT Command: AT+JOIN**
	559	+
	560	+(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
	561	+|=(% colspan="3" style="width: 644px;" %)AT+JOIN
	562	+|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
	563	+|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
340	340	OK
341	341
342	342	While Error in format, return AT_BUSY_ERROR
343	343	)))
344	344
	569	+
	570	+
345	345	== 6.4 LoRa® Network Join Mode ==
346	346
	573	+
347	347	Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
348	348
349		-AT Command: AT+NJM
350	350
351		-|=(% colspan="3" %)AT+NJM
352		-|**Command Example**|**Function**|**Response**
353		-|AT+NJM=?|Get the Network Join Mode|1(((
	577	+(% style="color:blue" %)**AT Command: AT+NJM**
	578	+
	579	+(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
	580	+|=(% colspan="3" style="width: 750px;" %)AT+NJM
	581	+|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
	582	+|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
354	354	OK
355	355	)))
356		-|AT+NJM=0|Set the Network Join Mode|OK
357		-|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR
	585	+|(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
	586	+|(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
358	358
359		-Downlink Command: 0x20
360	360
	589	+(% style="color:blue" %)**Downlink Command: 0x20**
	590	+
361	361	Format: Command Code (0x20) followed by 1 bytes mode value.
362	362
363	363	If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
364	364
365		-* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O
366		-* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1
	595	+* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
	596	+* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
367	367
	598	+
	599	+
	600	+
368	368	== 6.5 LoRa® Network Join Status ==
369	369
	603	+
370	370	Feature: LoRa® Network Join Status.
371	371
372		-AT Command: AT+NJS
373	373
374		-|=(% colspan="3" %)AT+NJS
375		-|**Command Example**|**Function**|**Response**
376		-|AT+NJS=?|Get the join status.|0(((
	607	+(% style="color:blue" %)**AT Command: AT+NJS**
	608	+
	609	+(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
	610	+|=(% colspan="3" style="width: 495px;" %)AT+NJS
	611	+|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
	612	+|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
377	377	OK
378	378	)))
379	379
	616	+
	617	+
380	380	== 6.6 Print Last Received Data in Raw Format ==
381	381
	620	+
382	382	Feature: Print Last Received Data in Raw Format<port:data>.
383	383
384		-AT Command: AT+RECV
385	385
386		-|=(% colspan="3" %)AT+RECV
387		-|**Command Example**|**Function**|**Response**
388		-|AT+RECV=?|print last received data in raw format.|0:(((
	624	+(% style="color:blue" %)**AT Command: AT+RECV**
	625	+
	626	+(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
	627	+|=(% colspan="3" style="width: 584px;" %)AT+RECV
	628	+|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
	629	+|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
389	389	OK
390	390	)))
391	391
	633	+
	634	+
392	392	== 6.7 Print Last Received Data in Binary Format ==
393	393
	637	+
394	394	Feature: Print Last Received Data in Binary Format<port:data>.
395	395
396		-AT Command: AT+RECVB
397	397
398		-|=(% colspan="3" %)AT+RECVB
399		-|**Command Example**|**Function**|**Response**
400		-|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010(((
	641	+(% style="color:blue" %)**AT Command: AT+RECVB**
	642	+
	643	+(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
	644	+|=(% colspan="3" style="width: 790px;" %)AT+RECVB
	645	+|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
	646	+|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
401	401	OK
402	402	)))
403	403
	650	+
	651	+
404	404	== 6.8 Send Text Data ==
405	405
	654	+
406	406	Feature: Send Text Data<port:data>.
407	407
408		-AT Command: AT+SEND
409	409
410		-|=(% colspan="3" %)AT+SEND
411		-|**Command Example**|**Function**|**Response**
412		-|AT+SEND=12:hello world|Send text data along with the application port.|OK(((
	658	+(% style="color:blue" %)**AT Command: AT+SEND**
	659	+
	660	+(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
	661	+|=(% colspan="3" style="width: 988px;" %)AT+SEND
	662	+|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
	663	+|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
413	413	While Error in format, return
414	414
415	415	AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
...	...	@@ -417,60 +417,74 @@
417	417
418	418	)))
419	419
	671	+
	672	+
420	420	== 6.9 Send Hexadecimal Data ==
421	421
	675	+
422	422	Feature: Send hexadecimal data along with the application port.
423	423
424		-AT Command: AT+SENDB
425	425
426		-|=(% colspan="3" %)AT+SENDB
427		-|**Command Example**|**Function**|**Response**
428		-|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK
429		-|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return(((
	679	+(% style="color:blue" %)**AT Command: AT+SENDB**
	680	+
	681	+(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
	682	+|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
	683	+|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
	684	+|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
	685	+|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
430	430	AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
431	431
432	432
433	433	)))
434	434
	691	+
	692	+
435	435	= 7. LoRaWAN network management =
436	436
	695	+
437	437	== 7.1 Adaptive Data Rate ==
438	438
	698	+
439	439	Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
440	440
441	441
442		-AT Command: AT+ADR
	702	+(% style="color:blue" %)**AT Command: AT+ADR**
443	443
444		-|=(% colspan="3" %)AT+ADR
445		-|**Command Example**|**Function**|**Response**
446		-|AT+ADR=?|Get the Adaptive Data Rate setting.|1(((
	704	+(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
	705	+|=(% colspan="3" style="width: 680px;" %)AT+ADR
	706	+|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
	707	+|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
447	447	OK
448	448	)))
449		-|AT+ADR=0|Set the Adaptive Data Rate setting.|OK
450		-|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return(((
	710	+|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK
	711	+|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((
451	451	AT_PARAM_ERROR
452	452	)))
453	453
454		-Downlink Command: 0x22
	715	+(% style="color:blue" %)**Downlink Command: 0x22**
455	455
456	456
	718	+
457	457	If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
458	458
459		-* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1.
460		-* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0.
	721	+* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
	722	+* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
461	461
462	462	== 7.2 LoRa® Class ==
463	463
464	464	Feature: Get or Set the Device Class(Currently only support class A, class C).
465	465
466		-AT Command:AT+CLASS
467	467
468		-|=(% colspan="3" %)AT+CLASS
469		-|**Command Example**|**Function**|**Response**
470		-|AT+CLASS=?|Get the Device Class.|A(((
	729	+(% style="color:blue" %)**AT Command:AT+CLASS**
	730	+
	731	+
	732	+(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
	733	+|=(% colspan="3" style="width: 504px;" %)AT+CLASS
	734	+|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
	735	+|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
471	471	OK
472	472	)))
473		-|AT+CLASS=C|Set the Device Class.|OK(((
	738	+|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((
474	474
475	475	)))
476	476
...	...	@@ -478,14 +478,17 @@
478	478
479	479	Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
480	480
481		-AT Command:AT+DCS
482	482
483		-|=(% colspan="3" %)AT+DCS
484		-|**Command Example**|**Function**|**Response**
485		-|AT+DCS=?|Get the ETSI Duty Cycle setting.|1(((
	747	+(% style="color:blue" %)**AT Command:AT+DCS**
	748	+
	749	+
	750	+(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
	751	+|=(% colspan="3" style="width: 512px;" %)AT+DCS
	752	+|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
	753	+|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
486	486	OK
487	487	)))
488		-|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK(((
	756	+|(% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((
489	489
490	490	)))
491	491
...	...	@@ -493,37 +493,44 @@
493	493
494	494	Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
495	495
496		-AT Command: AT+DR
497	497
498		-|=(% colspan="3" %)AT+DR
499		-|**Command Example**|**Function**|**Response**
500		-|AT+DR=?|Get the Data Rate.|5(((
	765	+(% style="color:blue" %)**AT Command: AT+DR**
	766	+
	767	+
	768	+(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
	769	+|=(% colspan="3" style="width: 463px;" %)AT+DR
	770	+|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
	771	+|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
501	501	OK
502	502	)))
503		-|AT+DR=2|Set the Data Rate.|OK(((
	774	+|(% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((
504	504
505	505	)))
506	506
507		-Downlink Command: 0x2200aaFF
	778	+(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
508	508
509	509
	781	+
510	510	If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
511	511
512		-* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1.
513		-* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0.
	784	+* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
	785	+* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
514	514
515	515	== 7.5 Frame Counter Downlink ==
516	516
517	517	Feature: Get or Set the Frame Counter Downlink.
518	518
519		-AT Command:AT+FCD
520	520
521		-|=(% colspan="3" %)AT+FCD
522		-|**Command Example**|**Function**|**Response**
523		-|AT+FCD=?|Get the Frame Counter Downlink.|0(((
	792	+(% style="color:blue" %)**AT Command:AT+FCD**
	793	+
	794	+
	795	+(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
	796	+|=(% colspan="3" style="width: 690px;" %)AT+FCD
	797	+|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
	798	+|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
524	524	OK
525	525	)))
526		-|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)(((
	801	+|(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
527	527	OK
528	528
529	529
...	...	@@ -533,14 +533,17 @@
533	533
534	534	Feature: Get or Set the Frame Counter Uplink.
535	535
536		-AT Command:AT+FCU
537	537
538		-|=(% colspan="3" %)AT+FCU
539		-|**Command Example**|**Function**|**Response**
540		-|AT+FCU=?|Get the Frame Counter Uplink.|0(((
	812	+(% style="color:blue" %)**AT Command:AT+FCU**
	813	+
	814	+
	815	+(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
	816	+|=(% colspan="3" style="width: 531px;" %)AT+FCU
	817	+|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
	818	+|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
541	541	OK
542	542	)))
543		-|AT+FCU=10|Set the Frame Counter Uplink.|OK(((
	821	+|(% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((
544	544
545	545	)))
546	546
...	...	@@ -548,14 +548,17 @@
548	548
549	549	Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
550	550
551		-AT Command:AT+JN1DL
552	552
553		-|=(% colspan="3" %)AT+JN1DL
554		-|**Command Example**|**Function**|**Response**
555		-|AT+JN1DL=?|Get the Join Accept Delay.|5000(((
	830	+(% style="color:blue" %)**AT Command:AT+JN1DL**
	831	+
	832	+
	833	+(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
	834	+|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
	835	+|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
	836	+|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
556	556	OK
557	557	)))
558		-|AT+JN1DL=10000|Set the Join Accept Delay.|OK(((
	839	+|(% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((
559	559
560	560	)))
561	561
...	...	@@ -563,61 +563,80 @@
563	563
564	564	Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
565	565
566		-AT Command:AT+JN2DL
567	567
568		-|=(% colspan="3" %)AT+JN2DL
569		-|**Command Example**|**Function**|**Response**
570		-|AT+JN2DL=?|Get the Join Accept Delay.|6000(((
	848	+(% style="color:blue" %)**AT Command:AT+JN2DL**
	849	+
	850	+
	851	+(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
	852	+|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
	853	+|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
	854	+|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
571	571	OK
572	572	)))
573		-|AT+JN2DL=20000|Set the Join Accept Delay.|OK(((
	857	+|(% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((
574	574
575	575	)))
576	576
577	577	== 7.9 Public Network Mode ==
578	578
579		-Feature: Get or Set the public network mode. (0: off, 1: on)
	863	+Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
580	580
581		-AT Command:AT+PNM
	865	+Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
582	582
583		-|=(% colspan="3" %)AT+PNM
584		-|**Command Example**|**Function**|**Response**
585		-|AT+PNM=?|Get the public network mode.|1(((
	867	+
	868	+(% style="color:blue" %)**AT Command:AT+PNM**
	869	+
	870	+
	871	+(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
	872	+|=(% colspan="3" style="width: 664px;" %)AT+PNM
	873	+|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
	874	+|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
586	586	OK
587	587	)))
588		-|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)(((
	877	+|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
	878	+Set the public network mode.
	879	+
	880	+Set syncword=0x34
	881	+)))|(% style="width:272px" %)(System will write new value to PNM)(((
589	589	OK
590	590
591	591
592	592	)))
	886	+|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
593	593
594	594	== 7.10 Receive Delay1 ==
595	595
596	596	Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
597	597
598		-AT Command:AT+RX1DL
599	599
600		-|=(% colspan="3" %)AT+RX1DL
601		-|**Command Example**|**Function**|**Response**
602		-|AT+RX1DL=?|Get the delay.|1000(((
	893	+(% style="color:blue" %)**AT Command:AT+RX1DL**
	894	+
	895	+
	896	+(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
	897	+|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
	898	+|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
	899	+|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
603	603	OK
604	604	)))
605		-|AT+RX1DL=1500|Set the delay.|OK(((
	902	+|(% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((
606	606
607	607	)))
608	608
609		-== 7.11Receive Delay2 ==
	906	+== 7.11 Receive Delay2 ==
610	610
611	611	Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
612	612
613		-AT Command:AT+RX2DL
614	614
615		-|=(% colspan="3" %)AT+RX2DL
616		-|**Command Example**|**Function**|**Response**
617		-|AT+RX2DL=?|Get the delay.|2000(((
	911	+(% style="color:blue" %)**AT Command:AT+RX2DL**
	912	+
	913	+
	914	+(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
	915	+|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
	916	+|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
	917	+|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
618	618	OK
619	619	)))
620		-|AT+RX2DL=2500|Set the delay.|OK(((
	920	+|(% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((
621	621
622	622	)))
623	623
...	...	@@ -625,14 +625,17 @@
625	625
626	626	Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
627	627
628		-AT Command:AT+RX2DR
629	629
630		-|=(% colspan="3" %)AT+RX2DR
631		-|**Command Example**|**Function**|**Response**
632		-|AT+RX2DR=?|Get the Rx2 window data rate.|2(((
	929	+(% style="color:blue" %)**AT Command:AT+RX2DR**
	930	+
	931	+
	932	+(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
	933	+|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
	934	+|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
	935	+|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
633	633	OK
634	634	)))
635		-|AT+RX2DR=6|Set the Rx2 window data rate.|OK(((
	938	+|(% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((
636	636
637	637	)))
638	638
...	...	@@ -640,14 +640,17 @@
640	640
641	641	Feature: Get or Set the Rx2 window frequency
642	642
643		-AT Command:AT+RX2FQ
644	644
645		-|=(% colspan="3" %)AT+RX2FQ
646		-|**Command Example**|**Function**|**Response**
647		-|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000(((
	947	+(% style="color:blue" %)**AT Command:AT+RX2FQ**
	948	+
	949	+
	950	+(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
	951	+|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
	952	+|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
	953	+|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
648	648	OK
649	649	)))
650		-|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK(((
	956	+|(% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((
651	651
652	652	)))
653	653
...	...	@@ -655,14 +655,17 @@
655	655
656	656	Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
657	657
658		-AT Command:AT+TXP
659	659
660		-|=(% colspan="3" %)AT+TXP
661		-|**Command Example**|**Function**|**Response**
662		-|AT+TXP=?|Get the Transmit Power.|0(((
	965	+(% style="color:blue" %)**AT Command:AT+TXP**
	966	+
	967	+
	968	+(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
	969	+|=(% colspan="3" style="width: 462px;" %)AT+TXP
	970	+|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
	971	+|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
663	663	OK
664	664	)))
665		-|AT+TXP=1|Set the Transmit Power.|OK(((
	974	+|(% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((
666	666
667	667	)))
668	668
...	...	@@ -670,18 +670,21 @@
670	670
671	671	If the downlink payload=22000100, it means setting the TXP to 0.
672	672
673		-* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2.
674		-* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0.
	982	+* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
	983	+* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
675	675
676	676	== 7.15 RSSI of the Last Received Packet ==
677	677
678	678	Feature: Get or Set the Rx2 window frequency
679	679
680		-AT Command:AT+RSSI
681	681
682		-|=(% colspan="3" %)AT+RSSI
683		-|**Command Example**|**Function**|**Response**
684		-|AT+RSSI=?|Get the RSSI of the last received packet.|0(((
	990	+(% style="color:blue" %)**AT Command:AT+RSSI**
	991	+
	992	+
	993	+(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
	994	+|=(% colspan="3" style="width: 554px;" %)AT+RSSI
	995	+|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
	996	+|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
685	685	OK
686	686	)))
687	687
...	...	@@ -689,11 +689,14 @@
689	689
690	690	Feature: Get the SNR of the last received packet
691	691
692		-AT Command:AT+SNR
693	693
694		-|=(% colspan="3" %)AT+SNR
695		-|**Command Example**|**Function**|**Response**
696		-|AT+SNR=?|Get the RSSI of the last received packet.|0(((
	1005	+(% style="color:blue" %)**AT Command:AT+SNR**
	1006	+
	1007	+
	1008	+(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
	1009	+|=(% colspan="3" style="width: 568px;" %)AT+SNR
	1010	+|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
	1011	+|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
697	697	OK
698	698	)))
699	699
...	...	@@ -701,114 +701,141 @@
701	701
702	702	Feature: Get or set the application port.
703	703
704		-AT Command: AT+PORT
705	705
706		-|=(% colspan="3" %)AT+PORT
707		-|**Command Example**|**Function**|**Response**
708		-|AT+PORT=?|Get the application port|21(((
	1020	+(% style="color:blue" %)**AT Command: AT+PORT**
	1021	+
	1022	+
	1023	+(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
	1024	+|=(% colspan="3" style="width: 497px;" %)AT+PORT
	1025	+|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
	1026	+|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
709	709	OK
710	710	)))
711		-|AT+PORT=21|Set the application port|OK
	1029	+|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
712	712
713		-Downlink Command: 0x23
	1031	+(% style="color:blue" %)**Downlink Command: 0x23**
714	714
	1033	+
715	715	Format: Command Code (0x23) followed by 1 bytes port value.
716	716
717	717	If the downlink payload=2301, it means set the application port to 1, while type code is 23.
718	718
719		-* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1
720		-* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5
	1038	+* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
	1039	+* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
721	721
722	722	== 7.18 Single Channel Mode ==
723	723
724	724	Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
725	725
726		-AT Command: AT+CHS
727	727
728		-|=(% colspan="3" %)AT+CHS
729		-|**Command Example**|**Function**|**Response**
730		-|AT+CHS=?|Get Frequency for Single Channel Mode|0(((
	1046	+(% style="color:blue" %)**AT Command: AT+CHS**
	1047	+
	1048	+
	1049	+(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
	1050	+|=(% colspan="3" style="width: 600px;" %)AT+CHS
	1051	+|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
	1052	+|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
731	731	OK
732	732	)))
733		-|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK
	1055	+|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
734	734
735	735	== 7.19 Eight Channel Mode ==
736	736
737	737	Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
738	738
739		-AT Command: AT+CHE
740	740
741		-|=(% colspan="3" %)AT+CHE
742		-|**Command Example**|**Function**|**Response**
743		-|AT+CHE=?|Get eight channels mode|1(((
	1062	+(% style="color:blue" %)**AT Command: AT+CHE**
	1063	+
	1064	+
	1065	+(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
	1066	+|=(% colspan="3" style="width: 707px;" %)AT+CHE
	1067	+|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
	1068	+|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
744	744	902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
745	745
746	746	OK
747	747	)))
748		-|AT+CHE=1|Set eight channels mode|OK
	1073	+|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
749	749
750		-Downlink Command: 0x24
	1075	+(% style="color:blue" %)**Downlink Command: 0x24**
751	751
	1077	+
752	752	Format: Command Code (0x24) followed by 1 bytes channel value.
753	753
754	754	If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
755	755
756		-* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1
757		-* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5
	1082	+* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
	1083	+* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
758	758
759	759	== 7.20 Get or Set RXwindows1 timeout ==
760	760
761	761	Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
762	762
763		-AT Command: AT+RX1WTO
764	764
765		-|=(% colspan="3" %)AT+ RX1WTO
766		-|**Command Example**|**Function**|**Response**
767		-|AT+RX1WTO=?|Get RXwindows1 timeout|14(((
	1090	+(% style="color:blue" %)**AT Command: AT+RX1WTO**
	1091	+
	1092	+
	1093	+(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
	1094	+|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
	1095	+|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
	1096	+|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
768	768	OK
769	769	)))
770		-|AT+RX1WTO=60|Set RXwindows1 timeout|OK
	1099	+|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
771	771
772		-AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
	1101	+(((
	1102	+**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
	1103	+)))
773	773
774		-[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
	1105	+[[image:image-20220526162535-1.png]]
775	775
	1107	+(((
776	776	Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
777	777
	1110	+
	1111	+)))
	1112	+
778	778	== 7.21 Get or Set RXwindows2 timeout ==
779	779
780	780	Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
781	781
782		-AT Command: AT+RX2WTO
783	783
784		-|=(% colspan="3" %)AT+ RX2WTO
785		-|**Command Example**|**Function**|**Response**
786		-|AT+RX2WTO=?|Get RXwindows2 timeout|7(((
	1118	+(% style="color:blue" %)**AT Command: AT+RX2WTO**
	1119	+
	1120	+
	1121	+(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
	1122	+|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
	1123	+|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
	1124	+|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
787	787	OK
788	788	)))
789		-|AT+RX2WTO=20|Set RXwindows2 timeout|OK
	1127	+|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
790	790
791	791	== 7.22 Setting up uplinkdwelltime (as923, au915) ==
792	792
793	793	Feature: Get or Set uplinkdwelltime
794	794
795		-AT Command: AT+DWELLT
796	796
797		-|=(% colspan="3" %)AT+DWELLT
798		-|**Command Example**|**Function**|**Response**
799		-|AT+DWELLT=?|Get uplinkdwelltime|1(((
	1134	+(% style="color:blue" %)**AT Command: AT+DWELLT**
	1135	+
	1136	+
	1137	+(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
	1138	+|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
	1139	+|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
	1140	+|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
800	800	OK
801	801	)))
802		-|AT+DWELLT=0|Set uplinkdwelltime|OK
	1143	+|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
803	803
804		-Downlink Command: 0x25
	1145	+(% style="color:blue" %)**Downlink Command: 0x25**
805	805
	1147	+
806	806	Format: Command Code (0x25) followed by 1 bytes state value.
807	807
808	808	If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
809	809
810		-* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1
811		-* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0
	1152	+* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
	1153	+* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
812	812
813	813	== 7.23 Set Packet Receiving Response Level ==
814	814
...	...	@@ -816,11 +816,11 @@
816	816
817	817	RPL value:
818	818
819		-* AT+RPL=0: Device won't immediately reply any downlink commands from platform.
820		-* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
821		-* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
822		-* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
823		-* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
	1161	+* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
	1162	+* **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
	1163	+* **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
	1164	+* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
	1165	+* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
824	824
825	825	Case Analyes:
826	826
...	...	@@ -828,37 +828,162 @@
828	828	* For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
829	829	* For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
830	830
831		-AT Command: AT+RPL
	1173	+(% style="color:blue" %)**AT Command: AT+RPL**
832	832
833		-|=(% colspan="3" %)AT+RPL
834		-|**Command Example**|**Function**|**Response**
835		-|AT+RPL=?|Get packet receiving response level|1(((
	1175	+
	1176	+(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
	1177	+|=(% colspan="3" style="width: 533px;" %)AT+RPL
	1178	+|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
	1179	+|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
836	836	OK
837	837	)))
838		-|AT+RPL=0|Set packet receiving response level|OK
	1182	+|(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
839	839
840		-Downlink Command: 0x21
	1184	+(% style="color:blue" %)**Downlink Command: 0x21**
841	841
	1186	+
842	842	Format: Command Code (0x21) followed by 1 bytes level value.
843	843
844	844	If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
845	845
846		-* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1
847		-* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2
	1191	+* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
	1192	+* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
848	848
	1194	+== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
	1195	+
	1196	+
	1197	+(% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
	1198	+
	1199	+
	1200	+(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
	1201	+|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
	1202	+|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
	1203	+|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
	1204	+OK
	1205	+)))
	1206	+|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
	1207	+1
	1208	+
	1209	+OK
	1210	+)))
	1211	+
	1212	+(% style="color:blue" %)**Downlink Command: 0x33**
	1213	+
	1214	+
	1215	+Format: Command Code (0x33) followed by 2 bytes mode value.
	1216	+
	1217	+If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
	1218	+
	1219	+* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
	1220	+* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
	1221	+
	1222	+== 7.25 Device offline rejoining （LWS007) ==
	1223	+
	1224	+
	1225	+(% style="color:blue" %)**AT Command: AT+DDETECT**
	1226	+
	1227	+
	1228	+(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
	1229	+|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
	1230	+|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
	1231	+|(% style="width:160px" %)(((
	1232	+AT+DDETECT=1,1440,2880
	1233	+
	1234	+value1
	1235	+)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
	1236	+1
	1237	+
	1238	+OK
	1239	+)))
	1240	+|(% style="width:160px" %)(((
	1241	+AT+DDETECT=1,?,2880
	1242	+
	1243	+value2
	1244	+)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
	1245	+
	1246	+
	1247	+OK
	1248	+)))
	1249	+|(% style="width:160px" %)(((
	1250	+AT+DDETECT=1,1440,？
	1251	+
	1252	+value3
	1253	+)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
	1254	+
	1255	+
	1256	+OK
	1257	+)))
	1258	+
	1259	+(% style="color:blue" %)**Downlink Command: 0x33**
	1260	+
	1261	+
	1262	+Format: Command Code (0x32) followed by 2 bytes mode value.
	1263	+
	1264	+If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
	1265	+
	1266	+* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
	1267	+
	1268	+== 7.26 Request the server to send an ACK ==
	1269	+
	1270	+
	1271	+(% style="color:blue" %)**AT Command: AT+PNACKMD**
	1272	+
	1273	+
	1274	+(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
	1275	+|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
	1276	+|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
	1277	+|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
	1278	+OK
	1279	+)))
	1280	+|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
	1281	+0
	1282	+
	1283	+OK
	1284	+)))
	1285	+
	1286	+== 7.27 Adjust network rejoining interval ==
	1287	+
	1288	+
	1289	+(% style="color:blue" %)**AT Command: AT+RJTDC**
	1290	+
	1291	+
	1292	+(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
	1293	+|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
	1294	+|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
	1295	+|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
	1296	+OK
	1297	+
	1298	+the interval is 30000ms = 30s
	1299	+)))
	1300	+|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
	1301	+Set the ReJoin data transmission interval to 60000ms = 60 seconds
	1302	+)))
	1303	+
	1304	+(% style="color:blue" %)**Downlink Command: 0x26**
	1305	+
	1306	+
	1307	+Format: Command Code (0x26) followed by 2 bytes mode value.
	1308	+
	1309	+If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
	1310	+
	1311	+* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
	1312	+* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
	1313	+
849	849	= 8. AT Commands Combination =
850	850
851	851	== 8.1 Set a fix RX2DR for downlink window ==
852	852
853		-* AT+ADR=0 ~-~-> Disable ADR first
854		-* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate
	1318	+* **AT+ADR=0 **~-~-> Disable ADR first
	1319	+* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
855	855
856	856	== 8.2 Use Downlink Command to set a fix uplink DR ==
857	857
858		-Downlink Command: 0x22000500
859	859
	1324	+(% style="color:blue" %)**Downlink Command: 0x22000500**
	1325	+
	1326	+
860	860	Same as:
861	861
862		-* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]]
863		-* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
864		-* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
	1329	+* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
	1330	+* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
	1331	+* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]

image-20220511120050-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+136.3 KB

Content

image-20220526162535-1.png

Author

...	...	@@ -1,0 +1,1 @@
	1	+XWiki.Xiaoling

Size

...	...	@@ -1,0 +1,1 @@
	1	+149.4 KB

Content