Changes for page End Device AT Commands and Downlink Command
Last modified by kai on 2024/09/06 10:00
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 2 added, 0 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,8 +1,9 @@ 1 -Contens 1 + **Contents：** 2 2 3 3 {{toc/}} 4 4 5 5 6 + 6 6 = 1. Introduction = 7 7 8 8 Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands: ... ... @@ -10,48 +10,95 @@ 10 10 * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device. 11 11 * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device. 12 12 14 +((( 13 13 **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.** 14 14 17 +))) 15 15 16 16 = 2. How to use AT Commands or Downlink command = 17 17 18 18 * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]] 19 19 * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command: 20 -** Use HEX format to send a downlink: [[TTN v3>> url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]21 -** Use Base64 format to send a downlink: [[Chirpstack>> url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].22 -** See use note for more serves [[Servers Note>> url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]23 +** Use HEX format to send a downlink: [[TTN v3>>doc:Main.Notes for TTN.WebHome]] 24 +** Use Base64 format to send a downlink: [[Chirpstack>>doc:Main.Notes for ChirpStack.WebHome]]. 25 +** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server) 23 23 24 -= 3. Support End Node and firmware version = 25 25 26 26 27 - (%style="background-color:#ffffcc;color:green;width:1039.22px" %)28 - |(% colspan="3" style="width:1036px" %)** Dragino STM32 base hardware Firmware / LoRaWAN stack list**29 - |(%style="width:216px"%)**Model**|(%style="width:346px" %)**Description**|(%style="width:472px" %)**Firmware Version <~-~-> Stack Version**30 -|(% style="width:216px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:346px"%)Open Source Generic LoRaWAN Sensor Node|(% style="width:472px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((31 - LSN50v1.7.0<~-~->DR-LWS-005;~-~->Supportsincethisversion29 += 3. Support End Node and firmware version = 30 + 31 +(% border="1" style="background-color:#ffffcc; color:green; width:966px" %) 32 +|=(% colspan="3" style="width: 963px;" %)((( 33 +Dragino STM32 base hardware Firmware / LoRaWAN stack list 32 32 ))) 33 -|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 34 -|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 35 -|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 36 -|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 35 +|(% style="width:187px" %)((( 36 +**Model** 37 +)))|(% style="width:330px" %)((( 38 +**Description** 39 +)))|(% style="width:445px" %)((( 40 +**Firmware Version <~-~-> Stack Version** 41 +))) 42 +|(% style="width:187px" %)((( 43 +[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]], 44 +)))|(% style="width:330px" %)((( 45 +Open Source Generic LoRaWAN Sensor Node 46 +)))|(% style="width:445px" %)((( 47 +((( 48 +LSN50 v1.6.0 <~-~-> DR-LWS-003; 49 +))) 37 37 38 - 39 - 40 -(% border="1" style="background-color:#ffffcc; color:green; width:942.222px" %) 41 -|=(% colspan="3" style="width: 939px;" %) Dragino STM32 base hardware Firmware / LoRaWAN stack list 42 -|(% style="width:187px" %)**Model**|(% style="width:306px" %)**Description**|(% style="width:443px" %)**Firmware Version <~-~-> Stack Version** 43 -|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:306px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:443px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 51 +((( 52 +((( 44 44 LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 45 45 ))) 46 -|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:306px" %)LoRaWAN GPS Tracker|(% style="width:443px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;((( 55 +))) 56 +))) 57 +|(% style="width:187px" %)((( 58 +[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]], 59 +)))|(% style="width:330px" %)((( 60 +LoRaWAN GPS Tracker 61 +)))|(% style="width:445px" %)((( 62 +((( 63 +LGT92 v1.6.3 <~-~-> DR-LWS-003; 64 +))) 65 + 66 +((( 67 +((( 47 47 LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version 48 48 ))) 49 -|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:306px" %)LoRaWAN BLE Indoor Tracker|(% style="width:443px" %)LBT1 v1.0 <~-~-> DR-LWS-005; 50 -|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:306px" %)LoRaWAN RS485 Modbus Converter|(% style="width:443px" %)RS485-LN v1.3 <~-~-> DR-LWS-005; 51 -|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:306px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:443px" %)LHT65 v1.7 <~-~-> DR-LWS-003;((( 70 +))) 71 +))) 72 +|(% style="width:187px" %)((( 73 +[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]], 74 +)))|(% style="width:330px" %)((( 75 +LoRaWAN BLE Indoor Tracker 76 +)))|(% style="width:445px" %)((( 77 +LBT1 v1.0 <~-~-> DR-LWS-005; 78 +))) 79 +|(% style="width:187px" %)((( 80 +[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]], 81 +)))|(% style="width:330px" %)((( 82 +LoRaWAN RS485 Modbus Converter 83 +)))|(% style="width:445px" %)((( 84 +RS485-LN v1.3 <~-~-> DR-LWS-005; 85 +))) 86 +|(% style="width:187px" %)((( 87 +[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]], 88 +)))|(% style="width:330px" %)((( 89 +LoRaWAN Temperature & Humidity Sensor 90 +)))|(% style="width:445px" %)((( 91 +((( 92 +LHT65 v1.7 <~-~-> DR-LWS-003; 93 +))) 94 + 95 +((( 96 +((( 52 52 LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version 53 53 ))) 99 +))) 100 +))) 54 54 102 + 55 55 = 4. System Management Commands = 56 56 57 57 == 4.1 Change Uplink Interval == ... ... @@ -60,11 +60,11 @@ 60 60 61 61 (% class="box infomessage" %) 62 62 ((( 63 -AT Command: AT+TDC 111 +**AT Command: AT+TDC** 64 64 ))) 65 65 66 66 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 67 -|=(% colspan="3" style="width: 724px;" %) 115 +|=(% colspan="3" style="width: 724px;" %)AT+TDC 68 68 |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response** 69 69 |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000((( 70 70 OK ... ... @@ -75,27 +75,34 @@ 75 75 Set transmit interval to 60000ms = 60 seconds 76 76 ))) 77 77 126 +{{info}} 78 78 **Downlink Command: 0x01** 128 +{{/info}} 79 79 130 +((( 80 80 Format: Command Code (0x01) followed by 3 bytes time value. 132 +))) 81 81 134 +((( 82 82 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01. 136 +))) 83 83 84 84 * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds 85 85 * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds 86 86 141 + 142 + 87 87 == 4.2 Reboot End Node == 88 88 89 89 Feature: Reboot End Node to perform a new OTAA or ABP Join. 90 90 91 91 {{info}} 92 -AT Command: ATZ 148 +**AT Command: ATZ** 93 93 {{/info}} 94 94 95 95 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 96 -|=(% colspan="3" %) 152 +|=(% colspan="3" %)ATZ: Trig a reset of the MCU 97 97 |**Command Example**|**Function**|**Response** 98 -~)~)~) 99 99 |ATZ|Reset MCU|((( 100 100 Device reset and show booting info 101 101 ... ... @@ -110,35 +110,56 @@ 110 110 <followed by the Tx and Rx information> 111 111 ))) 112 112 113 -Downlink Command: 0x04 168 +{{info}} 169 +**Downlink Command: 0x04** 170 +{{/info}} 114 114 172 +((( 115 115 Format: Command Code (0x04) followed by FF. 174 +))) 116 116 117 -If the downlink payload=04FF, the end node will reboot. 176 +((( 177 +If the downlink payload=**04FF**, the end node will reboot. 118 118 179 + 180 +))) 181 + 119 119 == 4.3 Reset to factory Default == 120 120 121 121 Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command. 122 122 123 -AT Command: AT+FDR 186 +{{info}} 187 +**AT Command: AT+FDR** 188 +{{/info}} 124 124 125 -|=(% colspan="3" %)Reset to factory default 126 -|**Command Example**|**Function**|**Response** 127 -|AT+FDR|Reset to factory default|Device reset to factory default parameters and show booting info 190 +(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %) 191 +|=(% colspan="3" style="width: 828px;" %)Reset to factory default 192 +|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response** 193 +|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)((( 194 +Device reset to factory default parameters and show booting info 128 128 129 -{{{LSN50 Device/LoRa ST Module 196 +LSN50 Device/LoRa ST Module 197 + 130 130 Image Version: XX 199 + 131 131 Frequency Band: XX 201 + 132 132 DevEui= XX XX XX XX XX XX XX XX 203 + 133 133 Please set the parameters or reset Device to apply change 134 - }}}205 +))) 135 135 207 +{{info}} 208 +**Downlink Command: 0x04** 209 +{{/info}} 136 136 137 -Downlink Command: 0x04 138 - 211 +((( 139 139 Format: Command Code (0x04) followed by FE. 213 +))) 140 140 141 -If the downlink payload=04FE, Reset Parameters to Factory Default, Keys Reserve. 215 +((( 216 +If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve. 217 +))) 142 142 143 143 144 144 == 4.4 Show Firmware Version == ... ... @@ -145,30 +145,42 @@ 145 145 146 146 Feature: Show firmware version. No downlink command yet. 147 147 148 -AT Command: AT+VER 224 +{{info}} 225 +**AT Command: AT+VER** 226 +{{/info}} 149 149 150 -|=(% colspan="3" %)AT+VER: Image Version and Frequency Band 151 -|**Command Example**|**Function**|**Response** 152 -|AT+VER=?|Show Image version and Frequency Band| 228 +(% border="1" style="background-color:#ffffcc; color:green; width:586px" %) 229 +|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band 230 +|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response** 231 +|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)((( 232 +1.3 EU868 153 153 154 -{{{1.3 EU868 155 155 OK 156 - }}}235 +))) 157 157 237 +{{info}} 238 +**Downlink Command: 0x26 (Valid in 006 stack)** 239 +{{/info}} 158 158 159 -Downlink Command: 0x26 (Valid in 006 stack) 160 - 241 +((( 161 161 Downlink Format: 0x26 243 +))) 162 162 245 +((( 163 163 Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes 247 +))) 164 164 165 -xx: Software Type: 249 +((( 250 +**xx: Software Type:** 251 +))) 166 166 167 167 * 0x00 01: LGT92 Version 168 168 * 0x00 02: LBT1 169 169 * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01 170 170 171 -yy: Frequency Band: 257 +((( 258 +**yy: Frequency Band:** 259 +))) 172 172 173 173 * 0x01: EU868 174 174 * 0x02: US915 ... ... @@ -181,7 +181,9 @@ 181 181 * 0x09: AS923-2 182 182 * 0xa0: AS923-3 183 183 184 -zz: Subband 272 +((( 273 +**zz: Subband** 274 +))) 185 185 186 186 firmware version: v1.1.0 ~-~-> 110 187 187 ... ... @@ -190,21 +190,29 @@ 190 190 191 191 Feature: Show All configure. No downlink command yet. 192 192 193 -AT Command: AT+CFG 283 +{{info}} 284 +**AT Command: AT+CFG** 285 +{{/info}} 194 194 195 -|=(% colspan="3" %)AT+CFG: Print all configurations 196 -|**Command Example**|**Function**|**Response** 197 -|AT+CFG|Show all configures| 287 +(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %) 288 +|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations 289 +|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response** 290 +|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)((( 291 +AT+DEUI = XX XX XX XX XX XX XX XX 198 198 199 -{{{AT+DEUI = XX XX XX XX XX XX XX XX 200 200 AT+DADDR=XXXXXXXX 294 + 201 201 ………. 296 + 202 202 AT+RX2WTO=X 298 + 203 203 AT+CHS=868100000 300 + 204 204 OK 205 - }}}302 +))) 206 206 207 207 305 + 208 208 = 5. Keys, IDs and EUIs management = 209 209 210 210 == 5.1 Application EUI == ... ... @@ -211,99 +211,129 @@ 211 211 212 212 Feature: Get or Set the Application EUI. 213 213 214 -AT Command: AT+APPEUI 312 +{{info}} 313 +**AT Command: AT+APPEUI** 314 +{{/info}} 215 215 216 -|=(% colspan="3" %)AT+APPEUI 217 -|**Command Example**|**Function**|**Response** 218 -|AT+APPEUI=?|Get the Application EUI|00 b3 d5 00 00 00 00 00((( 316 +(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %) 317 +|=(% colspan="3" style="width: 683px;" %)AT+APPEUI 318 +|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response** 319 +|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00((( 219 219 OK 220 220 ))) 221 -|AT+APPEUI=00 b3 d5 7e f0 00 4d 34|Set the Application EUI|OK 322 +|(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK 222 222 324 + 325 + 223 223 == 5.2 Application Key == 224 224 225 225 Feature: Get or Set the Application Key. 226 226 227 -AT Command: AT+APPKEY 330 +{{info}} 331 +**AT Command: AT+APPKEY** 332 +{{/info}} 228 228 229 -|=(% colspan="3" %)AT+APPKEY 230 -|**Command Example**|**Function**|**Response** 231 -|AT+APPKEY=?|Get the Application Key|00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 334 +(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %) 335 +|=(% colspan="3" style="width: 973px;" %)AT+APPKEY 336 +|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response** 337 +|(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 232 232 OK 233 233 ))) 234 -|AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|Set the Application Key .|OK340 +|(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK 235 235 342 + 343 + 236 236 == 5.3 Application Session Key == 237 237 238 238 Feature: Get or Set the Application Session Key. 239 239 240 -AT Command: AT+APPSKEY 348 +{{info}} 349 +**AT Command: AT+APPSKEY** 350 +{{/info}} 241 241 242 -|=(% colspan="3" %)AT+APPSKEY 243 -|**Command Example**|**Function**|**Response** 244 -|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 352 +(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %) 353 +|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY 354 +|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response** 355 +|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 245 245 OK 246 246 ))) 247 -|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key .|(While Error in format, return AT_PARAM_ERROR)(((358 +|(% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)((( 248 248 OK 249 249 ))) 250 250 362 + 251 251 == 5.4 Device Address == 252 252 253 253 Feature: Get or Set the Device Address. 254 254 255 -AT Command: AT+DADDR 367 +{{info}} 368 +**AT Command: AT+DADDR** 369 +{{/info}} 256 256 257 -|=(% colspan="3" %)AT+DADDR 258 -|**Command Example**|**Function**|**Response** 259 -|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 371 +(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %) 372 +|=(% colspan="3" style="width: 792px;" %)AT+DADDR 373 +|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response** 374 +|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)((( 260 260 A8 40 41 FF 261 261 262 262 OK 263 263 ))) 264 -|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK 379 +|(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK 265 265 381 + 266 266 == 5.5 Device EUI == 267 267 268 268 Feature: Get or Set the Device EUI. 269 269 270 -AT Command: AT+DEUI 386 +{{info}} 387 +**AT Command: AT+DEUI** 388 +{{/info}} 271 271 272 -|=(% colspan="3" %)AT+DEUI 273 -|**Command Example**|**Function**|**Response** 274 -|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55((( 390 +(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %) 391 +|=(% colspan="3" style="width: 1032px;" %)AT+DEUI 392 +|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response** 393 +|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55((( 275 275 OK 276 276 ))) 277 -|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)((( 396 +|(% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)((( 278 278 OK 279 279 ))) 280 280 400 + 281 281 == 5.6 Network ID == 282 282 283 283 Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection) 284 284 285 -AT Command: AT+NWKID 405 +{{info}} 406 +**AT Command: AT+NWKID** 407 +{{/info}} 286 286 287 -|=(% colspan="3" %)AT+NWKID 288 -|**Command Example**|**Function**|**Response** 289 -|AT+NWKID=?|Get the Network ID.|a8 40 41 ff((( 409 +(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %) 410 +|=(% colspan="3" style="width: 445px;" %)AT+NWKID 411 +|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response** 412 +|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff((( 290 290 OK 291 291 ))) 292 -|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK 415 +|(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK 293 293 417 + 294 294 == 5.7 Network Session Key == 295 295 296 296 Feature: Get or Set the Network Session Key 297 297 298 -AT Command: AT+NWKSKEY 422 +{{info}} 423 +**AT Command: AT+NWKSKEY** 424 +{{/info}} 299 299 300 -|=(% colspan="3" %)AT+NWKSKEY 301 -|**Command Example**|**Function**|**Response** 302 -|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 426 +(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %) 427 +|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY 428 +|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response** 429 +|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 303 303 OK 304 304 ))) 305 -|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK 432 +|(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK 306 306 434 + 307 307 = 6. Joining and sending date on LoRaWAN network = 308 308 309 309 == 6.1 Confirm Mode == ... ... @@ -310,15 +310,18 @@ 310 310 311 311 Feature: Get or Set the confirmation mode (0-1). 312 312 313 -AT Command: AT+CFM 441 +{{info}} 442 +**AT Command: AT+CFM** 443 +{{/info}} 314 314 315 -|=(% colspan="3" %)AT+CFM 316 -|**Command Example**|**Function**|**Response** 317 -|AT+CFM=?|Get the confirmation mode|0((( 445 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 446 +|=(% colspan="3" style="width: 707px;" %)AT+CFM 447 +|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response** 448 +|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0((( 318 318 OK 319 319 ))) 320 -|AT+CFM=1|Set the confirmation mode|OK 321 -|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR 451 +|(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK 452 +|(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR 322 322 323 323 Downlink Command: 0x05 324 324 ... ... @@ -329,100 +329,130 @@ 329 329 * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1 330 330 * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0 331 331 463 + 332 332 == 6.2 Confirm Status == 333 333 334 334 Feature: Get confirmation status of the last AT+SEND (0-1). 335 335 336 -AT Command: AT+CFS 468 +{{info}} 469 +**AT Command: AT+CFS** 470 +{{/info}} 337 337 338 -|=(% colspan="3" %)AT+CFS 339 -|**Command Example**|**Function**|**Response** 340 -|AT+CFS=?|Get confirmation status|0((( 472 +(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 473 +|=(% colspan="3" style="width: 531px;" %)AT+CFS 474 +|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response** 475 +|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0((( 341 341 OK 342 342 ))) 343 343 479 + 344 344 == 6.3 Join LoRa® Network == 345 345 346 346 Feature: Join network. 347 347 348 -AT Command: AT+JOIN 484 +{{info}} 485 +**AT Command: AT+JOIN** 486 +{{/info}} 349 349 350 -|=(% colspan="3" %)AT+JOIN 351 -|**Command Example**|**Function**|**Response** 352 -|AT+JOIN ?|Get imformation.|AT+JOIN: Join network((( 488 +(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %) 489 +|=(% colspan="3" style="width: 644px;" %)AT+JOIN 490 +|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response** 491 +|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network((( 353 353 OK 354 354 355 355 While Error in format, return AT_BUSY_ERROR 356 356 ))) 357 357 497 + 358 358 == 6.4 LoRa® Network Join Mode == 359 359 360 360 Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA). 361 361 362 -AT Command: AT+NJM 502 +{{info}} 503 +**AT Command: AT+NJM** 504 +{{/info}} 363 363 364 -|=(% colspan="3" %)AT+NJM 365 -|**Command Example**|**Function**|**Response** 366 -|AT+NJM=?|Get the Network Join Mode|1((( 506 +(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %) 507 +|=(% colspan="3" style="width: 750px;" %)AT+NJM 508 +|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response** 509 +|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1((( 367 367 OK 368 368 ))) 369 -|AT+NJM=0|Set the Network Join Mode|OK 370 -|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR 512 +|(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK 513 +|(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR 371 371 372 -Downlink Command: 0x20 515 +{{info}} 516 +**Downlink Command: 0x20** 517 +{{/info}} 373 373 374 374 Format: Command Code (0x20) followed by 1 bytes mode value. 375 375 376 376 If the downlink payload=2000, it means set the Network Join Mode, while type code is 20. 377 377 378 -* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O 379 -* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1 523 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O 524 +* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1 380 380 526 + 381 381 == 6.5 LoRa® Network Join Status == 382 382 383 383 Feature: LoRa® Network Join Status. 384 384 385 -AT Command: AT+NJS 531 +{{info}} 532 +**AT Command: AT+NJS** 533 +{{/info}} 386 386 387 -|=(% colspan="3" %)AT+NJS 388 -|**Command Example**|**Function**|**Response** 389 -|AT+NJS=?|Get the join status.|0((( 535 +(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %) 536 +|=(% colspan="3" style="width: 495px;" %)AT+NJS 537 +|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response** 538 +|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0((( 390 390 OK 391 391 ))) 392 392 542 + 393 393 == 6.6 Print Last Received Data in Raw Format == 394 394 395 395 Feature: Print Last Received Data in Raw Format<port:data>. 396 396 397 -AT Command: AT+RECV 547 +{{info}} 548 +**AT Command: AT+RECV** 549 +{{/info}} 398 398 399 -|=(% colspan="3" %)AT+RECV 400 -|**Command Example**|**Function**|**Response** 401 -|AT+RECV=?|print last received data in raw format.|0:((( 551 +(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 552 +|=(% colspan="3" style="width: 584px;" %)AT+RECV 553 +|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response** 554 +|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:((( 402 402 OK 403 403 ))) 404 404 558 + 405 405 == 6.7 Print Last Received Data in Binary Format == 406 406 407 407 Feature: Print Last Received Data in Binary Format<port:data>. 408 408 409 -AT Command: AT+RECVB 563 +{{info}} 564 +**AT Command: AT+RECVB** 565 +{{/info}} 410 410 411 -|=(% colspan="3" %)AT+RECVB 412 -|**Command Example**|**Function**|**Response** 413 -|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010((( 567 +(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %) 568 +|=(% colspan="3" style="width: 790px;" %)AT+RECVB 569 +|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response** 570 +|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010((( 414 414 OK 415 415 ))) 416 416 574 + 417 417 == 6.8 Send Text Data == 418 418 419 419 Feature: Send Text Data<port:data>. 420 420 421 -AT Command: AT+SEND 579 +{{info}} 580 +**AT Command: AT+SEND** 581 +{{/info}} 422 422 423 -|=(% colspan="3" %)AT+SEND 424 -|**Command Example**|**Function**|**Response** 425 -|AT+SEND=12:hello world|Send text data along with the application port.|OK((( 583 +(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %) 584 +|=(% colspan="3" style="width: 988px;" %)AT+SEND 585 +|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response** 586 +|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK((( 426 426 While Error in format, return 427 427 428 428 AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED ... ... @@ -430,21 +430,26 @@ 430 430 431 431 ))) 432 432 594 + 433 433 == 6.9 Send Hexadecimal Data == 434 434 435 435 Feature: Send hexadecimal data along with the application port. 436 436 437 -AT Command: AT+SENDB 599 +{{info}} 600 +**AT Command: AT+SENDB** 601 +{{/info}} 438 438 439 -|=(% colspan="3" %)AT+SENDB 440 -|**Command Example**|**Function**|**Response** 441 -|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK 442 -|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return((( 603 +(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %) 604 +|=(% colspan="3" style="width: 1117px;" %)AT+SENDB 605 +|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response** 606 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK 607 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return((( 443 443 AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED 444 444 445 445 446 446 ))) 447 447 613 + 448 448 = 7. LoRaWAN network management = 449 449 450 450 == 7.1 Adaptive Data Rate == ... ... @@ -451,231 +451,289 @@ 451 451 452 452 Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on). 453 453 620 +{{info}} 621 +**AT Command: AT+ADR** 622 +{{/info}} 454 454 455 -AT Command: AT+ADR 456 - 457 -|=(% colspan="3" %)AT+ADR 458 -|**Command Example**|**Function**|**Response** 459 -|AT+ADR=?|Get the Adaptive Data Rate setting.|1((( 624 +(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %) 625 +|=(% colspan="3" style="width: 680px;" %)AT+ADR 626 +|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response** 627 +|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1((( 460 460 OK 461 461 ))) 462 -|AT+ADR=0|Set the Adaptive Data Rate setting.|OK 463 -|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return((( 630 +|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK 631 +|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return((( 464 464 AT_PARAM_ERROR 465 465 ))) 466 466 467 -Downlink Command: 0x22 635 +{{info}} 636 +**Downlink Command: 0x22** 637 +{{/info}} 468 468 469 469 470 470 If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22. 471 471 472 -* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1. 473 -* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0. 642 +* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1. 643 +* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0. 474 474 645 + 475 475 == 7.2 LoRa® Class == 476 476 477 477 Feature: Get or Set the Device Class(Currently only support class A, class C). 478 478 479 -AT Command:AT+CLASS 650 +{{info}} 651 +**AT Command:AT+CLASS** 652 +{{/info}} 480 480 481 -|=(% colspan="3" %)AT+CLASS 482 -|**Command Example**|**Function**|**Response** 483 -|AT+CLASS=?|Get the Device Class.|A((( 654 +(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %) 655 +|=(% colspan="3" style="width: 504px;" %)AT+CLASS 656 +|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response** 657 +|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A((( 484 484 OK 485 485 ))) 486 -|AT+CLASS=C|Set the Device Class.|OK((( 660 +|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK((( 487 487 488 488 ))) 489 489 664 + 490 490 == 7.3 Duty Cycle Setting == 491 491 492 492 Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing. 493 493 494 -AT Command:AT+DCS 669 +{{info}} 670 +**AT Command:AT+DCS** 671 +{{/info}} 495 495 496 -|=(% colspan="3" %)AT+DCS 497 -|**Command Example**|**Function**|**Response** 498 -|AT+DCS=?|Get the ETSI Duty Cycle setting.|1((( 673 +(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %) 674 +|=(% colspan="3" style="width: 512px;" %)AT+DCS 675 +|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response** 676 +|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1((( 499 499 OK 500 500 ))) 501 -|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK((( 679 +|(% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK((( 502 502 503 503 ))) 504 504 683 + 505 505 == 7.4 Data Rate == 506 506 507 507 Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server 508 508 509 -AT Command: AT+DR 688 +{{info}} 689 +**AT Command: AT+DR** 690 +{{/info}} 510 510 511 -|=(% colspan="3" %)AT+DR 512 -|**Command Example**|**Function**|**Response** 513 -|AT+DR=?|Get the Data Rate.|5((( 692 +(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %) 693 +|=(% colspan="3" style="width: 463px;" %)AT+DR 694 +|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response** 695 +|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5((( 514 514 OK 515 515 ))) 516 -|AT+DR=2|Set the Data Rate.|OK((( 698 +|(% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK((( 517 517 518 518 ))) 519 519 520 -Downlink Command: 0x2200aaFF 702 +{{info}} 703 +**Downlink Command: 0x2200aaFF** 704 +{{/info}} 521 521 522 522 523 523 If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF. 524 524 525 -* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1. 526 -* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0. 709 +* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1. 710 +* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0. 527 527 712 + 528 528 == 7.5 Frame Counter Downlink == 529 529 530 530 Feature: Get or Set the Frame Counter Downlink. 531 531 532 -AT Command:AT+FCD 717 +{{info}} 718 +**AT Command:AT+FCD** 719 +{{/info}} 533 533 534 -|=(% colspan="3" %)AT+FCD 535 -|**Command Example**|**Function**|**Response** 536 -|AT+FCD=?|Get the Frame Counter Downlink.|0((( 721 +(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %) 722 +|=(% colspan="3" style="width: 690px;" %)AT+FCD 723 +|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response** 724 +|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0((( 537 537 OK 538 538 ))) 539 -|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)((( 727 +|(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)((( 540 540 OK 541 541 542 542 543 543 ))) 544 544 733 + 545 545 == 7.6 Frame Counter Uplink == 546 546 547 547 Feature: Get or Set the Frame Counter Uplink. 548 548 549 -AT Command:AT+FCU 738 +{{info}} 739 +**AT Command:AT+FCU** 740 +{{/info}} 550 550 551 -|=(% colspan="3" %)AT+FCU 552 -|**Command Example**|**Function**|**Response** 553 -|AT+FCU=?|Get the Frame Counter Uplink.|0((( 742 +(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 743 +|=(% colspan="3" style="width: 531px;" %)AT+FCU 744 +|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response** 745 +|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0((( 554 554 OK 555 555 ))) 556 -|AT+FCU=10|Set the Frame Counter Uplink.|OK((( 748 +|(% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK((( 557 557 558 558 ))) 559 559 752 + 560 560 == 7.7 Join Accept Delay1 == 561 561 562 562 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms. 563 563 564 -AT Command:AT+JN1DL 757 +{{info}} 758 +**AT Command:AT+JN1DL** 759 +{{/info}} 565 565 566 -|=(% colspan="3" %)AT+JN1DL 567 -|**Command Example**|**Function**|**Response** 568 -|AT+JN1DL=?|Get the Join Accept Delay.|5000((( 761 +(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %) 762 +|=(% colspan="3" style="width: 534px;" %)AT+JN1DL 763 +|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response** 764 +|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000((( 569 569 OK 570 570 ))) 571 -|AT+JN1DL=10000|Set the Join Accept Delay.|OK((( 767 +|(% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK((( 572 572 573 573 ))) 574 574 771 + 575 575 == 7.8 Join Accept Delay2 == 576 576 577 577 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms. 578 578 579 -AT Command:AT+JN2DL 776 +{{info}} 777 +**AT Command:AT+JN2DL** 778 +{{/info}} 580 580 581 -|=(% colspan="3" %)AT+JN2DL 582 -|**Command Example**|**Function**|**Response** 583 -|AT+JN2DL=?|Get the Join Accept Delay.|6000((( 780 +(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %) 781 +|=(% colspan="3" style="width: 535px;" %)AT+JN2DL 782 +|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response** 783 +|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000((( 584 584 OK 585 585 ))) 586 -|AT+JN2DL=20000|Set the Join Accept Delay.|OK((( 786 +|(% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK((( 587 587 588 588 ))) 589 589 790 + 590 590 == 7.9 Public Network Mode == 591 591 592 592 Feature: Get or Set the public network mode. (0: off, 1: on) 593 593 594 -AT Command:AT+PNM 795 +{{info}} 796 +**AT Command:AT+PNM** 797 +{{/info}} 595 595 596 -|=(% colspan="3" %)AT+PNM 597 -|**Command Example**|**Function**|**Response** 598 -|AT+PNM=?|Get the public network mode.|1((( 799 +(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %) 800 +|=(% colspan="3" style="width: 664px;" %)AT+PNM 801 +|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response** 802 +|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1((( 599 599 OK 600 600 ))) 601 -|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)((( 805 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)((( 602 602 OK 603 603 604 604 605 605 ))) 606 606 811 + 607 607 == 7.10 Receive Delay1 == 608 608 609 609 Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms 610 610 611 -AT Command:AT+RX1DL 816 +{{info}} 817 +**AT Command:AT+RX1DL** 818 +{{/info}} 612 612 613 -|=(% colspan="3" %)AT+RX1DL 614 -|**Command Example**|**Function**|**Response** 615 -|AT+RX1DL=?|Get the delay.|1000((( 820 +(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %) 821 +|=(% colspan="3" style="width: 405px;" %)AT+RX1DL 822 +|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response** 823 +|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000((( 616 616 OK 617 617 ))) 618 -|AT+RX1DL=1500|Set the delay.|OK((( 826 +|(% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK((( 619 619 620 620 ))) 621 621 622 -== 7.11Receive Delay2 == 623 623 831 +== 7.11 Receive Delay2 == 832 + 624 624 Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms 625 625 626 -AT Command:AT+RX2DL 835 +{{info}} 836 +**AT Command:AT+RX2DL** 837 +{{/info}} 627 627 628 -|=(% colspan="3" %)AT+RX2DL 629 -|**Command Example**|**Function**|**Response** 630 -|AT+RX2DL=?|Get the delay.|2000((( 839 +(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %) 840 +|=(% colspan="3" style="width: 478px;" %)AT+RX2DL 841 +|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response** 842 +|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000((( 631 631 OK 632 632 ))) 633 -|AT+RX2DL=2500|Set the delay.|OK((( 845 +|(% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK((( 634 634 635 635 ))) 636 636 849 + 637 637 == 7.12 Rx2 Window Data Rate == 638 638 639 639 Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X) 640 640 641 -AT Command:AT+RX2DR 854 +{{info}} 855 +**AT Command:AT+RX2DR** 856 +{{/info}} 642 642 643 -|=(% colspan="3" %)AT+RX2DR 644 -|**Command Example**|**Function**|**Response** 645 -|AT+RX2DR=?|Get the Rx2 window data rate.|2((( 858 +(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %) 859 +|=(% colspan="3" style="width: 522px;" %)AT+RX2DR 860 +|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response** 861 +|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2((( 646 646 OK 647 647 ))) 648 -|AT+RX2DR=6|Set the Rx2 window data rate.|OK((( 864 +|(% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK((( 649 649 650 650 ))) 651 651 868 + 652 652 == 7.13 Rx2 Window Frequency == 653 653 654 654 Feature: Get or Set the Rx2 window frequency 655 655 656 -AT Command:AT+RX2FQ 873 +{{info}} 874 +**AT Command:AT+RX2FQ** 875 +{{/info}} 657 657 658 -|=(% colspan="3" %)AT+RX2FQ 659 -|**Command Example**|**Function**|**Response** 660 -|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000((( 877 +(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 878 +|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ 879 +|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response** 880 +|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000((( 661 661 OK 662 662 ))) 663 -|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK((( 883 +|(% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK((( 664 664 665 665 ))) 666 666 887 + 667 667 == 7.14 Transmit Power == 668 668 669 669 Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. ) 670 670 671 -AT Command:AT+TXP 892 +{{info}} 893 +**AT Command:AT+TXP** 894 +{{/info}} 672 672 673 -|=(% colspan="3" %)AT+TXP 674 -|**Command Example**|**Function**|**Response** 675 -|AT+TXP=?|Get the Transmit Power.|0((( 896 +(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %) 897 +|=(% colspan="3" style="width: 462px;" %)AT+TXP 898 +|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response** 899 +|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0((( 676 676 OK 677 677 ))) 678 -|AT+TXP=1|Set the Transmit Power.|OK((( 902 +|(% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK((( 679 679 680 680 ))) 681 681 ... ... @@ -683,146 +683,190 @@ 683 683 684 684 If the downlink payload=22000100, it means setting the TXP to 0. 685 685 686 -* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2. 687 -* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0. 910 +* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2. 911 +* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0. 688 688 913 + 689 689 == 7.15 RSSI of the Last Received Packet == 690 690 691 691 Feature: Get or Set the Rx2 window frequency 692 692 693 -AT Command:AT+RSSI 918 +{{info}} 919 +**AT Command:AT+RSSI** 920 +{{/info}} 694 694 695 -|=(% colspan="3" %)AT+RSSI 696 -|**Command Example**|**Function**|**Response** 697 -|AT+RSSI=?|Get the RSSI of the last received packet.|0((( 922 +(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %) 923 +|=(% colspan="3" style="width: 554px;" %)AT+RSSI 924 +|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response** 925 +|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0((( 698 698 OK 699 699 ))) 700 700 929 + 701 701 == 7.16 SNR of the Last Received Packet == 702 702 703 703 Feature: Get the SNR of the last received packet 704 704 705 -AT Command:AT+SNR 934 +{{info}} 935 +**AT Command:AT+SNR** 936 +{{/info}} 706 706 707 -|=(% colspan="3" %)AT+SNR 708 -|**Command Example**|**Function**|**Response** 709 -|AT+SNR=?|Get the RSSI of the last received packet.|0((( 938 +(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %) 939 +|=(% colspan="3" style="width: 568px;" %)AT+SNR 940 +|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response** 941 +|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0((( 710 710 OK 711 711 ))) 712 712 945 + 713 713 == 7.17 Application Port == 714 714 715 715 Feature: Get or set the application port. 716 716 717 -AT Command: AT+PORT 950 +{{info}} 951 +**AT Command: AT+PORT** 952 +{{/info}} 718 718 719 -|=(% colspan="3" %)AT+PORT 720 -|**Command Example**|**Function**|**Response** 721 -|AT+PORT=?|Get the application port|21((( 954 +(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %) 955 +|=(% colspan="3" style="width: 497px;" %)AT+PORT 956 +|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response** 957 +|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21((( 722 722 OK 723 723 ))) 724 -|AT+PORT=21|Set the application port|OK 960 +|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK 725 725 726 -Downlink Command: 0x23 962 +{{info}} 963 +**Downlink Command: 0x23** 964 +{{/info}} 727 727 728 728 Format: Command Code (0x23) followed by 1 bytes port value. 729 729 730 730 If the downlink payload=2301, it means set the application port to 1, while type code is 23. 731 731 732 -* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1 733 -* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5 970 +* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1 971 +* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5 734 734 973 + 735 735 == 7.18 Single Channel Mode == 736 736 737 737 Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode. 738 738 739 -AT Command: AT+CHS 978 +{{info}} 979 +**AT Command: AT+CHS** 980 +{{/info}} 740 740 741 -|=(% colspan="3" %)AT+CHS 742 -|**Command Example**|**Function**|**Response** 743 -|AT+CHS=?|Get Frequency for Single Channel Mode|0((( 982 +(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %) 983 +|=(% colspan="3" style="width: 600px;" %)AT+CHS 984 +|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response** 985 +|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0((( 744 744 OK 745 745 ))) 746 -|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK 988 +|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK 747 747 990 + 748 748 == 7.19 Eight Channel Mode == 749 749 750 750 Feature: Get or Set eight channels mode,Only for US915,AU915,CN470. 751 751 752 -AT Command: AT+CHE 995 +{{info}} 996 +**AT Command: AT+CHE** 997 +{{/info}} 753 753 754 -|=(% colspan="3" %)AT+CHE 755 -|**Command Example**|**Function**|**Response** 756 -|AT+CHE=?|Get eight channels mode|1((( 999 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 1000 +|=(% colspan="3" style="width: 707px;" %)AT+CHE 1001 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response** 1002 +|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1((( 757 757 902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7 758 758 759 759 OK 760 760 ))) 761 -|AT+CHE=1|Set eight channels mode|OK 1007 +|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK 762 762 763 -Downlink Command: 0x24 1009 +{{info}} 1010 +**Downlink Command: 0x24** 1011 +{{/info}} 764 764 765 765 Format: Command Code (0x24) followed by 1 bytes channel value. 766 766 767 767 If the downlink payload=2401, it means set channel mode to 1, while type code is 24. 768 768 769 -* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1 770 -* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5 1017 +* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1 1018 +* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5 771 771 1020 + 772 772 == 7.20 Get or Set RXwindows1 timeout == 773 773 774 774 Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255). 775 775 776 -AT Command: AT+RX1WTO 1025 +{{info}} 1026 +**AT Command: AT+RX1WTO** 1027 +{{/info}} 777 777 778 -|=(% colspan="3" %)AT+ RX1WTO 779 -|**Command Example**|**Function**|**Response** 780 -|AT+RX1WTO=?|Get RXwindows1 timeout|14((( 1029 +(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %) 1030 +|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO 1031 +|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response** 1032 +|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14((( 781 781 OK 782 782 ))) 783 -|AT+RX1WTO=60|Set RXwindows1 timeout|OK 1035 +|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK 784 784 785 -AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1037 +((( 1038 +**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1039 +))) 786 786 787 -[[ ~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]1041 +[[image:image-20220526162535-1.png]] 788 788 1043 +((( 789 789 Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink. 790 790 1046 + 1047 +))) 1048 + 791 791 == 7.21 Get or Set RXwindows2 timeout == 792 792 793 793 Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255). 794 794 795 -AT Command: AT+RX2WTO 1053 +{{info}} 1054 +**AT Command: AT+RX2WTO** 1055 +{{/info}} 796 796 797 -|=(% colspan="3" %)AT+ RX2WTO 798 -|**Command Example**|**Function**|**Response** 799 -|AT+RX2WTO=?|Get RXwindows2 timeout|7((( 1057 +(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1058 +|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO 1059 +|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response** 1060 +|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7((( 800 800 OK 801 801 ))) 802 -|AT+RX2WTO=20|Set RXwindows2 timeout|OK 1063 +|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK 803 803 1065 + 804 804 == 7.22 Setting up uplinkdwelltime (as923, au915) == 805 805 806 806 Feature: Get or Set uplinkdwelltime 807 807 808 -AT Command: AT+DWELLT 1070 +{{info}} 1071 +**AT Command: AT+DWELLT** 1072 +{{/info}} 809 809 810 -|=(% colspan="3" %)AT+DWELLT 811 -|**Command Example**|**Function**|**Response** 812 -|AT+DWELLT=?|Get uplinkdwelltime|1((( 1074 +(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1075 +|=(% colspan="3" style="width: 494px;" %)AT+DWELLT 1076 +|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response** 1077 +|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1((( 813 813 OK 814 814 ))) 815 -|AT+DWELLT=0|Set uplinkdwelltime|OK 1080 +|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK 816 816 817 -Downlink Command: 0x25 1082 +{{info}} 1083 +**Downlink Command: 0x25** 1084 +{{/info}} 818 818 819 819 Format: Command Code (0x25) followed by 1 bytes state value. 820 820 821 821 If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25. 822 822 823 -* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1 824 -* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0 1090 +* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1 1091 +* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0 825 825 1093 + 826 826 == 7.23 Set Packet Receiving Response Level == 827 827 828 828 Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal. ... ... @@ -829,11 +829,11 @@ 829 829 830 830 RPL value: 831 831 832 -* AT+RPL=0: Device won't immediately reply any downlink commands from platform. 833 -* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00. 834 -* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command. 835 -* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command. 836 -* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands. 1100 +* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform. 1101 +* **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00. 1102 +* **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command. 1103 +* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command. 1104 +* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands. 837 837 838 838 Case Analyes: 839 839 ... ... @@ -841,37 +841,46 @@ 841 841 * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command. 842 842 * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command. 843 843 844 -AT Command: AT+RPL 1112 +{{info}} 1113 +**AT Command: AT+RPL** 1114 +{{/info}} 845 845 846 -|=(% colspan="3" %)AT+RPL 847 -|**Command Example**|**Function**|**Response** 848 -|AT+RPL=?|Get packet receiving response level|1((( 1116 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %) 1117 +|=(% colspan="3" style="width: 533px;" %)AT+RPL 1118 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response** 1119 +|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1((( 849 849 OK 850 850 ))) 851 -|AT+RPL=0|Set packet receiving response level|OK 1122 +|(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK 852 852 853 -Downlink Command: 0x21 1124 +{{info}} 1125 +**Downlink Command: 0x21** 1126 +{{/info}} 854 854 855 855 Format: Command Code (0x21) followed by 1 bytes level value. 856 856 857 857 If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21. 858 858 859 -* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1 860 -* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2 1132 +* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1 1133 +* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2 861 861 1135 + 862 862 = 8. AT Commands Combination = 863 863 864 864 == 8.1 Set a fix RX2DR for downlink window == 865 865 866 -* AT+ADR=0 ~-~-> Disable ADR first 867 -* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate 1140 +* **AT+ADR=0 **~-~-> Disable ADR first 1141 +* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate 868 868 1143 + 869 869 == 8.2 Use Downlink Command to set a fix uplink DR == 870 870 871 -Downlink Command: 0x22000500 1146 +{{info}} 1147 +**Downlink Command: 0x22000500** 1148 +{{/info}} 872 872 873 873 Same as: 874 874 875 -* AT+ADR=0 [[Reference>> url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]]876 -* AT+DR=5 [[Reference>> url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]877 -* AT+TXP=0 [[Reference>> url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]1152 +* AT+ADR=0 [[Reference>>||anchor="H7.1AdaptiveDataRate"]] 1153 +* AT+DR=5 [[Reference>>||anchor="H7.4DataRate"]] 1154 +* AT+TXP=0 [[Reference>>||anchor="H7.14TransmitPower"]]
- image-20220511120050-1.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Xiaoling - Size
-
... ... @@ -1,0 +1,1 @@ 1 +136.3 KB - Content
- image-20220526162535-1.png
-
- Author
-
... ... @@ -1,0 +1,1 @@ 1 +XWiki.Xiaoling - Size
-
... ... @@ -1,0 +1,1 @@ 1 +149.4 KB - Content