Last modified by kai on 2024/09/06 10:00
<
From version < 63.45 >
edited by Xiaoling
on 2023/05/29 16:00
To version < 63.31 >
edited by Xiaoling
on 2023/04/19 16:08
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -10,7 +10,6 @@
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 12  * (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 -
14 14  * (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
15 15  
16 16  (((
... ... @@ -22,7 +22,6 @@
22 22  
23 23  
24 24  * **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
25 -
26 26  * **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
27 27  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
28 28  ** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
... ... @@ -33,10 +33,17 @@
33 33  = 3. Support End Node and firmware version =
34 34  
35 35  
34 +(% border="1" style="background-color:#F2F2F2; width:966px" %)
35 +|=(% colspan="3" style="width: 963px;background-color:#D9E2F3;color:#0070C0" %)(((
36 36  Dragino STM32 base hardware Firmware / LoRaWAN stack list
37 -
38 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:966px" %)
39 -|(% style="background-color:#4f81bd; color:white; width:187px" %)**Model**|(% style="background-color:#4f81bd; color:white; width:330px" %)**Description**|(% style="background-color:#4f81bd; color:white; width:445px" %)**Firmware Version <~-~-> Stack Version**
37 +)))
38 +|(% style="width:187px;color:#0070C0" %)(((
39 +**Model**
40 +)))|(% style="width:330px;color:#0070C0" %)(((
41 +**Description**
42 +)))|(% style="width:445px;color:#0070C0" %)(((
43 +**Firmware Version <~-~-> Stack Version**
44 +)))
40 40  |(% style="width:187px" %)(((
41 41  [[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
42 42  )))|(% style="width:330px" %)(((
... ... @@ -109,8 +109,9 @@
109 109  
110 110  (% style="color:blue" %)**AT Command: AT+TDC**
111 111  
112 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:727.222px" %)
113 -|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:329px" %)**Response**
117 +(% border="1" style="background-color:#F2F2F2; width:727.222px" %)
118 +|=(% colspan="3" style="width: 724px;background-color:#D9E2F3;color:#0070C0" %)AT+TDC
119 +|(% style="width:165px;color:#0070C0" %)**Command Example**|(% style="width:227px;color:#0070C0" %)**Function**|(% style="width:329px;color:#0070C0" %)**Response**
114 114  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
115 115  OK
116 116  
... ... @@ -121,6 +121,8 @@
121 121  )))
122 122  
123 123  (((
130 +
131 +
124 124  (% style="color:blue" %)**Downlink Command: 0x01**
125 125  
126 126  Format: Command Code (0x01) followed by 3 bytes time value.
... ... @@ -131,7 +131,6 @@
131 131  )))
132 132  
133 133  * **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
134 -
135 135  * **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
136 136  
137 137  (% style="display:none" %) (%%)
... ... @@ -142,10 +142,11 @@
142 142  Feature: Reboot End Node to perform a new OTAA or ABP Join.
143 143  
144 144  
145 -(% style="color:blue" %)**AT Command: ATZ  ~/~/ **(%%)Trig a reset of the MCU
152 +(% style="color:blue" %)**AT Command: ATZ**
146 146  
147 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:546px" %)
148 -|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:92px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:294px" %)**Response**
154 +(% border="1" style="background-color:#F2F2F2; width:546px" %)
155 +|=(% colspan="3" style="width: 543px;background-color:#D9E2F3;color:#0070C0" %)ATZ: Trig a reset of the MCU
156 +|(% style="width:157px;color:#0070C0" %)**Command Example**|(% style="width:92px;color:#0070C0" %)**Function**|(% style="width:294px;color:#0070C0" %)**Response**
149 149  |(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
150 150  Device reset and show booting info
151 151  
... ... @@ -177,10 +177,11 @@
177 177  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
178 178  
179 179  
180 -(% style="color:blue" %)**AT Command: AT+FDR  ~/~/  **(%%)Reset to factory default
188 +(% style="color:blue" %)**AT Command: AT+FDR**
181 181  
182 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:789px" %)
183 -|(% style="background-color:#4f81bd; color:white; width:154px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:175px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:456px" %)**Response**
190 +(% border="1" style="background-color:#F2F2F2; width:789px" %)
191 +|=(% colspan="3" style="width: 786px;background-color:#D9E2F3;color:#0070C0" %)Reset to factory default
192 +|(% style="width:154px;color:#0070C0" %)**Command Example**|(% style="width:175px;color:#0070C0" %)**Function**|(% style="width:456px;color:#0070C0" %)**Response**
184 184  |(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
185 185  Device reset to factory default parameters and show booting info
186 186  
... ... @@ -212,10 +212,11 @@
212 212  Feature: Show firmware version. No downlink command yet.
213 213  
214 214  
215 -(% style="color:blue" %)**AT Command: AT+VER  ~/~/   **(%%)Image Version and Frequency Band
224 +(% style="color:blue" %)**AT Command: AT+VER**
216 216  
217 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:542px" %)
218 -|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:86px" %)**Response**
226 +(% border="1" style="background-color:#f2f2f2; width:542px" %)
227 +|=(% colspan="3" style="width: 539px;background-color:#D9E2F3;color:#0070C0" %)AT+VER: Image Version and Frequency Band
228 +|(% style="width:157px;color:#0070C0" %)**Command Example**|(% style="width:295px;color:#0070C0" %)**Function**|(% style="width:86px;color:#0070C0" %)**Response**
219 219  |(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
220 220  1.3 EU868
221 221  
... ... @@ -235,7 +235,7 @@
235 235  (((
236 236  
237 237  
238 -(% style="color:#037691" %)**xx: Software Type:**
248 +**xx: Software Type:**
239 239  )))
240 240  
241 241  * 0x00 01: LGT92 Version
... ... @@ -245,7 +245,7 @@
245 245  (((
246 246  
247 247  
248 -(% style="color:#037691" %)**yy: Frequency Band:**
258 +**yy: Frequency Band:**
249 249  )))
250 250  
251 251  * 0x01: EU868
... ... @@ -262,7 +262,7 @@
262 262  (((
263 263  
264 264  
265 -(% style="color:#037691" %)**zz: Subband**
275 +**zz: Subband**
266 266  )))
267 267  
268 268  firmware version: v1.1.0 ~-~-> 110
... ... @@ -274,10 +274,11 @@
274 274  Feature: Show All configure. No downlink command yet.
275 275  
276 276  
277 -(% style="color:blue" %)**AT Command: AT+CFG  ~/~/ **(%%)Print all configurations
287 +(% style="color:blue" %)**AT Command: AT+CFG**
278 278  
279 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:599.222px" %)
280 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:154px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:280px" %)**Response**
289 +(% border="1" style="background-color:#f2f2f2; width:599.222px" %)
290 +|=(% colspan="3" style="width: 596px;background-color:#D9E2F3;color:#0070C0" %)AT+CFG: Print all configurations
291 +|(% style="width:160px;color:#0070C0" %)**Command Example**|(% style="width:154px;color:#0070C0" %)**Function**|(% style="width:280px;color:#0070C0" %)**Response**
281 281  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
282 282  AT+DEUI = XX XX XX XX XX XX XX XX
283 283  AT+DADDR=XXXXXXXX
... ... @@ -299,12 +299,13 @@
299 299  
300 300  (% style="color:blue" %)**AT Command: AT+APPEUI**
301 301  
302 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:643px" %)
303 -|(% style="background-color:#4f81bd; color:white; width:272px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:182px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:184px" %)**Response**
304 -|(% style="width:272px" %)AT+APPEUI=?|(% style="width:182px" %)Get the Application EUI|(% style="width:184px" %)00 b3 d5 00 00 00 00 00(((
313 +(% border="1" style="background-color:#f2f2f2; width:686.222px" %)
314 +|=(% colspan="3" style="width: 683px;background-color:#D9E2F3;color:#0070C0" %)AT+APPEUI
315 +|(% style="width:305px;color:#0070C0" %)**Command Example**|(% style="width:186px;color:#0070C0" %)**Function**|(% style="width:191px;color:#0070C0" %)**Response**
316 +|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
305 305  OK
306 306  )))
307 -|(% style="width:272px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:182px" %)Set the Application EUI|(% style="width:184px" %)OK
319 +|(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
308 308  
309 309  (% style="display:none" %) (%%)
310 310  
... ... @@ -316,8 +316,9 @@
316 316  
317 317  (% style="color:blue" %)**AT Command: AT+APPKEY**
318 318  
319 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:976.222px" %)
320 -|(% style="background-color:#4f81bd; color:white; width:441px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:180px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:350px" %)**Response**
331 +(% border="1" style="background-color:#f2f2f2; width:976.222px" %)
332 +|=(% colspan="3" style="width: 973px;background-color:#D9E2F3;color:#0070C0" %)AT+APPKEY
333 +|(% style="width:441px;color:#0070C0" %)**Command Example**|(% style="width:180px;color:#0070C0" %)**Function**|(% style="width:350px;color:#0070C0" %)**Response**
321 321  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
322 322  OK
323 323  )))
... ... @@ -333,8 +333,9 @@
333 333  
334 334  (% style="color:blue" %)**AT Command: AT+APPSKEY**
335 335  
336 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1040.22px" %)
337 -|(% style="background-color:#4f81bd; color:white; width:451px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:231px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:354px" %)**Response**
349 +(% border="1" style="background-color:#f2f2f2; width:1040.22px" %)
350 +|=(% colspan="3" style="width: 1037px;background-color:#D9E2F3;color:#0070C0" %)AT+APPSKEY
351 +|(% style="width:451px;color:#0070C0" %)**Command Example**|(% style="width:231px;color:#0070C0" %)**Function**|(% style="width:354px;color:#0070C0" %)**Response**
338 338  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
339 339  OK
340 340  )))
... ... @@ -352,8 +352,9 @@
352 352  
353 353  (% style="color:blue" %)**AT Command: AT+DADDR**
354 354  
355 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:795.222px" %)
356 -|(% style="background-color:#4f81bd; color:white; width:192px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:241px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:359px" %)**Response**
369 +(% border="1" style="background-color:#f2f2f2; width:795.222px" %)
370 +|=(% colspan="3" style="width: 792px;background-color:#D9E2F3;color:#0070C0" %)AT+DADDR
371 +|(% style="width:192px;color:#0070C0" %)**Command Example**|(% style="width:241px;color:#0070C0" %)**Function**|(% style="width:359px;color:#0070C0" %)**Response**
357 357  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
358 358  A8 40 41 FF
359 359  
... ... @@ -371,8 +371,9 @@
371 371  
372 372  (% style="color:blue" %)**AT Command: AT+DEUI**
373 373  
374 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1035.22px" %)
375 -|(% style="background-color:#4f81bd; color:white; width:250px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:634px" %)**Response**
389 +(% border="1" style="background-color:#f2f2f2; width:1035.22px" %)
390 +|=(% colspan="3" style="width: 1032px;background-color:#D9E2F3;color:#0070C0" %)AT+DEUI
391 +|(% style="width:250px;color:#0070C0" %)**Command Example**|(% style="width:147px;color:#0070C0" %)**Function**|(% style="width:634px;color:#0070C0" %)**Response**
376 376  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
377 377  OK
378 378  )))
... ... @@ -390,8 +390,9 @@
390 390  
391 391  (% style="color:blue" %)**AT Command: AT+NWKID**
392 392  
393 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:448.222px" %)
394 -|(% style="background-color:#4f81bd; color:white; width:191px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:153px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
409 +(% border="1" style="background-color:#f2f2f2; width:448.222px" %)
410 +|=(% colspan="3" style="width: 445px;background-color:#D9E2F3;color:#0070C0" %)AT+NWKID
411 +|(% style="width:191px;color:#0070C0" %)**Command Example**|(% style="width:153px;color:#0070C0" %)**Function**|(% style="width:101px;color:#0070C0" %)**Response**
395 395  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
396 396  OK
397 397  )))
... ... @@ -407,8 +407,9 @@
407 407  
408 408  (% style="color:blue" %)**AT Command: AT+NWKSKEY**
409 409  
410 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1017.22px" %)
411 -|(% style="background-color:#4f81bd; color:white; width:455px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:215px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:343px" %)**Response**
427 +(% border="1" style="background-color:#f2f2f2; width:1017.22px" %)
428 +|=(% colspan="3" style="width: 1014px;background-color:#D9E2F3;;color:#0070C0" %)AT+NWKSKEY
429 +|(% style="width:455px;color:#0070C0" %)**Command Example**|(% style="width:215px;color:#0070C0" %)**Function**|(% style="width:343px;color:#0070C0" %)**Response**
412 412  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
413 413  OK
414 414  )))
... ... @@ -428,8 +428,9 @@
428 428  
429 429  (% style="color:blue" %)**AT Command: AT+CFM**
430 430  
431 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:710.222px" %)
432 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:205px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:346px" %)**Response**
449 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
450 +|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+CFM
451 +|(% style="width:155px;color:#0070C0" %)**Command Example**|(% style="width:205px;color:#0070C0" %)**Function**|(% style="width:346px;color:#0070C0" %)**Response**
433 433  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
434 434  OK
435 435  )))
... ... @@ -443,7 +443,6 @@
443 443  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
444 444  
445 445  * **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
446 -
447 447  * **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
448 448  
449 449  (% style="display:none" %) (%%)
... ... @@ -453,13 +453,14 @@
453 453  
454 454  (% style="color:blue" %)**AT Command: AT+CFM**
455 455  
456 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:462px" %)
457 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
474 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
475 +|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+CFM
476 +|(% style="width:160px;color:#0070C0" %)**Command Example**|(% style="width:198px;color:#0070C0" %)**Function**|(% style="width:349px;color:#0070C0" %)**Response**
458 458  |(% style="width:160px" %)(((
459 459  AT+CFM=1,0,0
460 460  
461 461  value1
462 -)))|(% style="width:198px" %)confirmed uplink|(% style="width:100px" %)(((
481 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
463 463  1
464 464  
465 465  OK
... ... @@ -468,7 +468,7 @@
468 468  AT+CFM=0,?,0
469 469  
470 470  value2
471 -)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:100px" %)(((
490 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
472 472  0~~7
473 473  
474 474  OK
... ... @@ -477,7 +477,7 @@
477 477  AT+CFM=0,0,1
478 478  
479 479  value3
480 -)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:100px" %)(((
499 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
481 481  1
482 482  
483 483  OK
... ... @@ -490,7 +490,6 @@
490 490  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
491 491  
492 492  * **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
493 -
494 494  * **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
495 495  
496 496  (% style="display:none" %) (%%)
... ... @@ -503,8 +503,9 @@
503 503  
504 504  (% style="color:blue" %)**AT Command: AT+CFS**
505 505  
506 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:463px" %)
507 -|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
524 +(% border="1" style="background-color:#f2f2f2; width:463px" %)
525 +|=(% colspan="3" style="width: 460px;background-color:#D9E2F3;color:#0070C0" %)AT+CFS
526 +|(% style="width:156px;color:#0070C0" %)**Command Example**|(% style="width:193px;color:#0070C0" %)**Function**|(% style="width:107px;color:#0070C0" %)**Response**
508 508  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
509 509  OK
510 510  )))
... ... @@ -519,8 +519,9 @@
519 519  
520 520  (% style="color:blue" %)**AT Command: AT+JOIN**
521 521  
522 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:647.222px" %)
523 -|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:334px" %)**Response**
541 +(% border="1" style="background-color:#f2f2f2; width:647.222px" %)
542 +|=(% colspan="3" style="width: 644px;background-color:#D9E2F3;color:#0070C0" %)AT+JOIN
543 +|(% style="width:163px;color:#0070C0" %)**Command Example**|(% style="width:147px;color:#0070C0" %)**Function**|(% style="width:334px;color:#0070C0" %)**Response**
524 524  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
525 525  OK
526 526  While Error in format, return AT_BUSY_ERROR
... ... @@ -536,8 +536,9 @@
536 536  
537 537  (% style="color:blue" %)**AT Command: AT+NJM**
538 538  
539 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:753.222px" %)
540 -|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
559 +(% border="1" style="background-color:#f2f2f2; width:753.222px" %)
560 +|=(% colspan="3" style="width: 750px;background-color:#D9E2F3;color:#0070C0" %)AT+NJM
561 +|(% style="width:162px;color:#0070C0" %)**Command Example**|(% style="width:227px;color:#0070C0" %)**Function**|(% style="width:361px;color:#0070C0" %)**Response**
541 541  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
542 542  OK
543 543  )))
... ... @@ -551,7 +551,6 @@
551 551  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
552 552  
553 553  * **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
554 -
555 555  * **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
556 556  
557 557  (% style="display:none" %) (%%)
... ... @@ -564,9 +564,10 @@
564 564  
565 565  (% style="color:blue" %)**AT Command: AT+NJS**
566 566  
567 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:435px" %)
568 -|(% style="background-color:#4f81bd; color:white; width:169px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:164px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:97px" %)**Response**
569 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:97px" %)0(((
587 +(% border="1" style="background-color:#f2f2f2; width:498.222px" %)
588 +|=(% colspan="3" style="width: 495px;background-color:#D9E2F3;color:#0070C0" %)AT+NJS
589 +|(% style="width:169px;color:#0070C0" %)**Command Example**|(% style="width:164px;color:#0070C0" %)**Function**|(% style="width:161px;color:#0070C0" %)**Response**
590 +|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
570 570  OK
571 571  )))
572 572  
... ... @@ -580,9 +580,10 @@
580 580  
581 581  (% style="color:blue" %)**AT Command: AT+RECV**
582 582  
583 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:543px" %)
584 -|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
585 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:104px" %)0:(((
604 +(% border="1" style="background-color:#f2f2f2; width:587.222px" %)
605 +|=(% colspan="3" style="width: 584px;background-color:#D9E2F3;color:#0070C0" %)AT+RECV
606 +|(% style="width:161px;color:#0070C0" %)**Command Example**|(% style="width:272px;color:#0070C0" %)**Function**|(% style="width:150px;color:#0070C0" %)**Response**
607 +|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
586 586  OK
587 587  )))
588 588  
... ... @@ -596,8 +596,9 @@
596 596  
597 597  (% style="color:blue" %)**AT Command: AT+RECVB**
598 598  
599 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:793.222px" %)
600 -|(% style="background-color:#4f81bd; color:white; width:173px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:497px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:120px" %)**Response**
621 +(% border="1" style="background-color:#f2f2f2; width:793.222px" %)
622 +|=(% colspan="3" style="width: 790px;background-color:#D9E2F3;color:#0070C0" %)AT+RECVB
623 +|(% style="width:173px;color:#0070C0" %)**Command Example**|(% style="width:497px;color:#0070C0" %)**Function**|(% style="width:120px;color:#0070C0" %)**Response**
601 601  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
602 602  OK
603 603  )))
... ... @@ -612,8 +612,9 @@
612 612  
613 613  (% style="color:blue" %)**AT Command: AT+SEND**
614 614  
615 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:991.222px" %)
616 -|(% style="background-color:#4f81bd; color:white; width:201px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:340px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:446px" %)**Response**
638 +(% border="1" style="background-color:#f2f2f2; width:991.222px" %)
639 +|=(% colspan="3" style="width: 988px;background-color:#D9E2F3;color:#0070C0" %)AT+SEND
640 +|(% style="width:201px;color:#0070C0" %)**Command Example**|(% style="width:340px;color:#0070C0" %)**Function**|(% style="width:446px;color:#0070C0" %)**Response**
617 617  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
618 618  While Error in format, return
619 619  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
... ... @@ -629,10 +629,11 @@
629 629  
630 630  (% style="color:blue" %)**AT Command: AT+SENDB**
631 631  
632 -(% border="1" cellspacing="4" style="width:974px" %)
633 -|(% style="background-color:#4f81bd; color:white; width:257px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:394px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:318px" %)**Response**
634 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)OK
635 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)While Error in format, return(((
656 +(% border="1" style="background-color:f2f2f2; width:1101px" %)
657 +|=(% colspan="3" style="width: 1098px;background-color:#D9E2F3;color:#0070C0" %)AT+SENDB
658 +|(% style="width:257px;color:#0070C0" %)**Command Example**|(% style="width:394px;color:#0070C0" %)**Function**|(% style="width:446px;color:#0070C0" %)**Response**
659 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
660 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
636 636  AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
637 637  )))
638 638  
... ... @@ -648,13 +648,14 @@
648 648  
649 649  (% style="color:blue" %)**AT Command: AT+ADR**
650 650  
651 -(% border="1" cellspacing="4" style="width:643px" %)
652 -|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:266px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:209px" %)**Response**
653 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:209px" %)1(((
676 +(% border="1" style="background-color:f2f2f2; width:683.222px" %)
677 +|=(% colspan="3" style="width: 680px;background-color:#D9E2F3;color:#0070C0" %)AT+ADR
678 +|(% style="width:162px;color:#0070C0" %)**Command Example**|(% style="width:266px;color:#0070C0" %)**Function**|(% style="width:250px;color:#0070C0" %)**Response**
679 +|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
654 654  OK
655 655  )))
656 -|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)OK
657 -|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)While Error in format, return(((
682 +|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK
683 +|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((
658 658  AT_PARAM_ERROR
659 659  )))
660 660  
... ... @@ -663,7 +663,6 @@
663 663  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
664 664  
665 665  * **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
666 -
667 667  * **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
668 668  
669 669  (% style="display:none" %) (%%)
... ... @@ -676,12 +676,13 @@
676 676  
677 677  (% style="color:blue" %)**AT Command:  AT+CLASS**
678 678  
679 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:428px" %)
680 -|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:166px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:94px" %)**Response**
681 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:94px" %)A(((
704 +(% border="1" style="background-color:#f2f2f2; width:507.222px" %)
705 +|=(% colspan="3" style="width: 504px;background-color:#D9E2F3;color:#0070C0" %)AT+CLASS
706 +|(% style="width:163px;color:#0070C0" %)**Command Example**|(% style="width:166px;color:#0070C0" %)**Function**|(% style="width:175px;color:#0070C0" %)**Response**
707 +|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
682 682  OK
683 683  )))
684 -|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:94px" %)OK(((
710 +|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((
685 685  
686 686  )))
687 687  
... ... @@ -695,13 +695,14 @@
695 695  == 7.3 Duty Cycle Setting ==
696 696  
697 697  
698 -Feature: Get or Set the ETSI Duty Cycle setting** : 0**=disable, **1**=enable - Only for testing.
724 +Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
699 699  
700 700  
701 701  (% style="color:blue" %)**AT Command:  AT+DCS**
702 702  
703 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515.222px" %)
704 -|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
729 +(% border="1" style="background-color:#f2f2f2; width:515.222px" %)
730 +|=(% colspan="3" style="width: 512px;background-color:#D9E2F3;color:#0070C0" %)AT+DCS
731 +|(% style="width:165px;color:#0070C0" %)**Command Example**|(% style="width:239px;color:#0070C0" %)**Function**|(% style="width:107px;color:#0070C0" %)**Response**
705 705  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
706 706  OK
707 707  )))
... ... @@ -720,17 +720,17 @@
720 720  **Notice:**
721 721  
722 722  * User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
723 -
724 724  * Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
725 725  
726 726  (% style="color:blue" %)**AT Command: AT+DR**
727 727  
728 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:409px" %)
729 -|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
730 -|(% style="width:156px" %)AT+DR=?|(% style="width:147px" %)Get the Data Rate.|(% style="width:100px" %)5(((
754 +(% border="1" style="background-color:#f2f2f2; width:466.222px" %)
755 +|=(% colspan="3" style="width: 463px;background-color:#D9E2F3;color:#0070C0" %)AT+DR
756 +|(% style="width:156px;color:#0070C0" %)**Command Example**|(% style="width:167px;color:#0070C0" %)**Function**|(% style="width:140px;color:#0070C0" %)**Response**
757 +|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
731 731  OK
732 732  )))
733 -|(% style="width:156px" %)AT+DR=2|(% style="width:147px" %)Set the Data Rate.|(% style="width:100px" %)OK(((
760 +|(% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((
734 734  
735 735  )))
736 736  
... ... @@ -739,7 +739,6 @@
739 739  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
740 740  
741 741  * **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
742 -
743 743  * **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
744 744  
745 745  (% style="display:none" %) (%%)
... ... @@ -752,8 +752,9 @@
752 752  
753 753  (% style="color:blue" %)**AT Command:  AT+FCD**
754 754  
755 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:693.222px" %)
756 -|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:258px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:269px" %)**Response**
781 +(% border="1" style="background-color:#f2f2f2; width:693.222px" %)
782 +|=(% colspan="3" style="width: 690px;background-color:#D9E2F3;color:#0070C0" %)AT+FCD
783 +|(% style="width:162px;color:#0070C0" %)**Command Example**|(% style="width:258px;color:#0070C0" %)**Function**|(% style="width:269px;color:#0070C0" %)**Response**
757 757  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
758 758  OK
759 759  )))
... ... @@ -770,8 +770,9 @@
770 770  
771 771  (% style="color:blue" %)**AT Command:  AT+FCU**
772 772  
773 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:534.222px" %)
774 -|(% style="background-color:#4f81bd; color:white; width:177px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
800 +(% border="1" style="background-color:#f2f2f2; width:534.222px" %)
801 +|=(% colspan="3" style="width: 531px;background-color:#D9E2F3;color:#0070C0" %)AT+FCU
802 +|(% style="width:177px;color:#0070C0" %)**Command Example**|(% style="width:239px;color:#0070C0" %)**Function**|(% style="width:113px;color:#0070C0" %)**Response**
775 775  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
776 776  OK
777 777  )))
... ... @@ -789,8 +789,9 @@
789 789  
790 790  (% style="color:blue" %)**AT Command:  AT+JN1DL**
791 791  
792 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:537.222px" %)
793 -|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:229px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:140px" %)**Response**
820 +(% border="1" style="background-color:#f2f2f2; width:537.222px" %)
821 +|=(% colspan="3" style="width: 534px;background-color:#D9E2F3;color:#0070C0" %)AT+JN1DL
822 +|(% style="width:164px;color:#0070C0" %)**Command Example**|(% style="width:229px;color:#0070C0" %)**Function**|(% style="width:140px;color:#0070C0" %)**Response**
794 794  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
795 795  OK
796 796  )))
... ... @@ -808,8 +808,9 @@
808 808  
809 809  (% style="color:blue" %)**AT Command:  AT+JN2DL**
810 810  
811 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:538.222px" %)
812 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:228px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:146px" %)**Response**
840 +(% border="1" style="background-color:#f2f2f2; width:538.222px" %)
841 +|=(% colspan="3" style="width: 535px;background-color:#D9E2F3;color:#0070C0" %)AT+JN2DL
842 +|(% style="width:160px;color:#0070C0" %)**Command Example**|(% style="width:228px;color:#0070C0" %)**Function**|(% style="width:146px;color:#0070C0" %)**Response**
813 813  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
814 814  OK
815 815  )))
... ... @@ -829,8 +829,9 @@
829 829  
830 830  (% style="color:blue" %)**AT Command:  AT+PNM**
831 831  
832 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:667.222px" %)
833 -|(% style="background-color:#4f81bd; color:white; width:166px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:225px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Response**
862 +(% border="1" style="background-color:#f2f2f2; width:667.222px" %)
863 +|=(% colspan="3" style="width: 664px;background-color:#D9E2F3;color:#0070C0" %)AT+PNM
864 +|(% style="width:166px;color:#0070C0" %)**Command Example**|(% style="width:225px;color:#0070C0" %)**Function**|(% style="width:272px;color:#0070C0" %)**Response**
834 834  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
835 835  OK
836 836  )))
... ... @@ -855,8 +855,9 @@
855 855  
856 856  (% style="color:blue" %)**AT Command: AT+RX1DL**
857 857  
858 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:408.222px" %)
859 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:122px" %)**Response**
889 +(% border="1" style="background-color:#f2f2f2; width:408.222px" %)
890 +|=(% colspan="3" style="width: 405px;background-color:#D9E2F3;color:#0070C0" %)AT+RX1DL
891 +|(% style="width:155px;color:#0070C0" %)**Command Example**|(% style="width:128px;color:#0070C0" %)**Function**|(% style="width:122px;color:#0070C0" %)**Response**
860 860  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
861 861  OK
862 862  )))
... ... @@ -874,8 +874,9 @@
874 874  
875 875  (% style="color:blue" %)**AT Command: AT+RX2DL**
876 876  
877 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:481.222px" %)
878 -|(% style="background-color:#4f81bd; color:white; width:175px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:152px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:150px" %)**Response**
909 +(% border="1" style="background-color:#f2f2f2; width:481.222px" %)
910 +|=(% colspan="3" style="width: 478px;background-color:#D9E2F3;color:#0070C0" %)AT+RX2DL
911 +|(% style="width:175px;color:#0070C0" %)**Command Example**|(% style="width:152px;color:#0070C0" %)**Function**|(% style="width:150px;color:#0070C0" %)**Response**
879 879  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
880 880  OK
881 881  )))
... ... @@ -893,8 +893,9 @@
893 893  
894 894  (% style="color:blue" %)**AT Command:  AT+RX2DR**
895 895  
896 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:525.222px" %)
897 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:232px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:130px" %)**Response**
929 +(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
930 +|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
931 +|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
898 898  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
899 899  OK
900 900  )))
... ... @@ -912,8 +912,9 @@
912 912  
913 913  (% style="color:blue" %)**AT Command:  AT+RX2FQ**
914 914  
915 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:587.222px" %)
916 -|(% style="background-color:#4f81bd; color:white; width:183px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:240px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:160px" %)**Response**
949 +(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
950 +|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
951 +|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
917 917  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
918 918  OK
919 919  )))
... ... @@ -933,8 +933,9 @@
933 933  
934 934  (% style="color:blue" %)**AT Command:  AT+TXP**
935 935  
936 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:465.222px" %)
937 -|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:189px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:112px" %)**Response**
971 +(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
972 +|=(% colspan="3" style="width: 462px;" %)AT+TXP
973 +|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
938 938  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
939 939  OK
940 940  )))
... ... @@ -947,7 +947,6 @@
947 947  If the downlink payload=22000100, it means setting the TXP to 0.
948 948  
949 949  * **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
950 -
951 951  * **Example 2**: Downlink Payload: **22000000**  ~/~/ Set AT+TXP=0.
952 952  
953 953  (% style="display:none" %) (%%)
... ... @@ -960,8 +960,9 @@
960 960  
961 961  (% style="color:blue" %)**AT Command:AT+RSSI**
962 962  
963 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:557.222px" %)
964 -|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:289px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
998 +(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
999 +|=(% colspan="3" style="width: 554px;" %)AT+RSSI
1000 +|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
965 965  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
966 966  OK
967 967  )))
... ... @@ -976,8 +976,9 @@
976 976  
977 977  (% style="color:blue" %)**AT Command:  AT+SNR**
978 978  
979 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:571.222px" %)
980 -|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:290px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
1015 +(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
1016 +|=(% colspan="3" style="width: 568px;" %)AT+SNR
1017 +|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
981 981  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
982 982  OK
983 983  )))
... ... @@ -992,12 +992,13 @@
992 992  
993 993  (% style="color:blue" %)**AT Command: AT+PORT**
994 994  
995 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:459px" %)
996 -|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
997 -|(% style="width:157px" %)AT+PORT=?|(% style="width:193px" %)Get the application port|(% style="width:104px" %)21(((
1032 +(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
1033 +|=(% colspan="3" style="width: 497px;" %)AT+PORT
1034 +|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
1035 +|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
998 998  OK
999 999  )))
1000 -|(% style="width:157px" %)AT+PORT=21|(% style="width:193px" %)Set the application port|(% style="width:104px" %)OK
1038 +|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
1001 1001  
1002 1002  (% style="color:blue" %)**Downlink Command: 0x23**
1003 1003  
... ... @@ -1006,7 +1006,6 @@
1006 1006  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
1007 1007  
1008 1008  * **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1009 -
1010 1010  * **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1011 1011  
1012 1012  (% style="display:none" %) (%%)
... ... @@ -1019,12 +1019,13 @@
1019 1019  
1020 1020  (% style="color:blue" %)**AT Command: AT+CHS**
1021 1021  
1022 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:584px" %)
1023 -|(% style="background-color:#4f81bd; color:white; width:182px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
1024 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:101px" %)0(((
1059 +(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
1060 +|=(% colspan="3" style="width: 600px;" %)AT+CHS
1061 +|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
1062 +|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
1025 1025  OK
1026 1026  )))
1027 -|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:101px" %)OK
1065 +|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
1028 1028  
1029 1029  (% style="display:none" %) (%%)
1030 1030  
... ... @@ -1036,8 +1036,9 @@
1036 1036  
1037 1037  (% style="color:blue" %)**AT Command: AT+CHE**
1038 1038  
1039 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:710.222px" %)
1040 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
1077 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1078 +|=(% colspan="3" style="width: 707px;" %)AT+CHE
1079 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1041 1041  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
1042 1042  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
1043 1043  
... ... @@ -1052,7 +1052,6 @@
1052 1052  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1053 1053  
1054 1054  * **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1055 -
1056 1056  * **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1057 1057  
1058 1058  (% style="display:none" %) (%%)
... ... @@ -1065,8 +1065,9 @@
1065 1065  
1066 1066  (% style="color:blue" %)**AT Command: AT+RX1WTO**
1067 1067  
1068 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:460.222px" %)
1069 -|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:201px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:93px" %)**Response**
1106 +(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1107 +|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1108 +|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1070 1070  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
1071 1071  OK
1072 1072  )))
... ... @@ -1093,12 +1093,13 @@
1093 1093  
1094 1094  (% style="color:blue" %)**AT Command: AT+RX2WTO**
1095 1095  
1096 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:448px" %)
1097 -|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:192px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:90px" %)**Response**
1098 -|(% style="width:162px" %)AT+RX2WTO=?|(% style="width:192px" %)Get RXwindows2 timeout|(% style="width:90px" %)7(((
1135 +(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1136 +|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1137 +|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1138 +|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
1099 1099  OK
1100 1100  )))
1101 -|(% style="width:162px" %)AT+RX2WTO=20|(% style="width:192px" %)Set RXwindows2 timeout|(% style="width:90px" %)OK
1141 +|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1102 1102  
1103 1103  (% style="display:none" %) (%%)
1104 1104  
... ... @@ -1110,12 +1110,13 @@
1110 1110  
1111 1111  (% style="color:blue" %)**AT Command: AT+DWELLT**
1112 1112  
1113 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:419px" %)
1114 -|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:157px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:95px" %)**Response**
1115 -|(% style="width:162px" %)AT+DWELLT=?|(% style="width:157px" %)Get uplinkdwelltime|(% style="width:95px" %)1(((
1153 +(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1154 +|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1155 +|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1156 +|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
1116 1116  OK
1117 1117  )))
1118 -|(% style="width:162px" %)AT+DWELLT=0|(% style="width:157px" %)Set uplinkdwelltime|(% style="width:95px" %)OK
1159 +|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
1119 1119  
1120 1120  (% style="color:blue" %)**Downlink Command: 0x25**
1121 1121  
... ... @@ -1124,7 +1124,6 @@
1124 1124  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1125 1125  
1126 1126  * **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1127 -
1128 1128  * **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1129 1129  
1130 1130  (% style="display:none" %) (%%)
... ... @@ -1135,30 +1135,25 @@
1135 1135  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1136 1136  
1137 1137  
1138 -(% style="color:blue" %)**RPL value:**
1178 +**RPL value:**
1139 1139  
1140 1140  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1141 -
1142 1142  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1143 -
1144 1144  * **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1145 -
1146 1146  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1147 -
1148 1148  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1149 1149  
1150 -(% style="color:blue" %)**Case Analyes:**
1186 +**Case Analyes:**
1151 1151  
1152 1152  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1153 -
1154 1154  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1155 -
1156 1156  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1157 1157  
1158 1158  (% style="color:blue" %)**AT Command: AT+RPL**
1159 1159  
1160 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:536.222px" %)
1161 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:263px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:109px" %)**Response**
1194 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1195 +|=(% colspan="3" style="width: 533px;" %)AT+RPL
1196 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1162 1162  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
1163 1163  OK
1164 1164  )))
... ... @@ -1171,7 +1171,6 @@
1171 1171  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1172 1172  
1173 1173  * **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1174 -
1175 1175  * **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1176 1176  
1177 1177  (% style="display:none" %) (%%)
... ... @@ -1181,12 +1181,13 @@
1181 1181  
1182 1182  (% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1183 1183  
1184 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:589px" %)
1185 -|(% style="background-color:#4f81bd; color:white; width:227px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:300px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:87px" %)**Response**
1186 -|(% style="width:227px" %)AT+SETMAXNBTRANS=1，0|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1218 +(% border="1" style="background-color:#ffffcc; color:green; width:589px" %)
1219 +|=(% colspan="3" style="width: 586px;" %)AT+**SETMAXNBTRANS**
1220 +|(% style="width:227px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:87px" %)**Response**
1221 +|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1187 1187  OK
1188 1188  )))
1189 -|(% style="width:227px" %)AT+SETMAXNBTRANS=？，1|(% style="width:300px" %)(((
1224 +|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1190 1190  value2: 0: uplink fcnt doesn't change for each NBTrans;
1191 1191  
1192 1192  1: uplink fcnt increase by 1 for each NBTrans.
... ... @@ -1203,7 +1203,6 @@
1203 1203  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1204 1204  
1205 1205  * Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1206 -
1207 1207  * Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1208 1208  
1209 1209  (% style="display:none" %) (%%)
... ... @@ -1218,13 +1218,14 @@
1218 1218  * ACK_Timout_1: Unit: min
1219 1219  * ACK_Timout_2: Unit: min
1220 1220  
1221 -(% border="1" style="background-color:#f2f2f2; width:562px" %)
1222 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
1255 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1256 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1257 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1223 1223  |(% style="width:160px" %)(((
1224 1224  AT+DDETECT=1,1440,2880
1225 1225  
1226 1226  value1
1227 -)))|(% style="width:272px" %)Enable online detect|(% style="width:89px" %)(((
1262 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1228 1228  1
1229 1229  
1230 1230  OK
... ... @@ -1233,7 +1233,7 @@
1233 1233  AT+DDETECT=1,?,2880
1234 1234  
1235 1235  value2
1236 -)))|(% style="width:272px" %)Online detection packet sending time|(% style="width:89px" %)(((
1271 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1237 1237  
1238 1238  
1239 1239  OK
... ... @@ -1242,7 +1242,7 @@
1242 1242  AT+DDETECT=1,1440,？
1243 1243  
1244 1244  value3
1245 -)))|(% style="width:272px" %)Process rejoin|(% style="width:89px" %)(((
1280 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1246 1246  
1247 1247  
1248 1248  OK
... ... @@ -1255,8 +1255,6 @@
1255 1255  If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1256 1256  
1257 1257  * **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1258 -
1259 -*
1260 1260  ** 0x01 : Flag
1261 1261  ** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1262 1262  ** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
... ... @@ -1269,12 +1269,13 @@
1269 1269  
1270 1270  (% style="color:blue" %)**AT Command: AT+PNACKMD**
1271 1271  
1272 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:889px" %)
1273 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:627px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
1274 -|(% style="width:160px" %)AT+PNACKMD=1|(% style="width:627px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:100px" %)1(((
1305 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1306 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1307 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1308 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1275 1275  OK
1276 1276  )))
1277 -|(% style="width:160px" %)AT+PNACKMD=0|(% style="width:627px" %)off request the server to send an ACK|(% style="width:100px" %)(((
1311 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1278 1278  0
1279 1279  OK
1280 1280  )))
... ... @@ -1286,14 +1286,15 @@
1286 1286  
1287 1287  (% style="color:blue" %)**AT Command: AT+RJTDC**
1288 1288  
1289 -(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:889px" %)
1290 -|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:357px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
1291 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:357px" %)Show the ReJoin data transmission interval in min|(% style="width:361px" %)30(((
1323 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1324 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1325 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1326 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1292 1292  OK
1293 1293  
1294 1294  the interval is 30 min
1295 1295  )))
1296 -|(% style="width:165px" %)AT+RJTDC=60|(% style="width:357px" %)Set the ReJoin data transmission interval in min|(% style="width:361px" %)OK(((
1331 +|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1297 1297  Set the ReJoin data transmission interval to 60 min
1298 1298  )))
1299 1299  
... ... @@ -1303,10 +1303,9 @@
1303 1303  
1304 1304  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1305 1305  
1306 -* **Example 1:** Downlink Payload: 26000A  ~/~/  Set AT+RJTDC=10
1341 +* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1342 +* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1307 1307  
1308 -* **Example 2: **Downlink Payload: 260002  ~/~/  Set AT+RJTDC=2
1309 -
1310 1310  (% style="display:none" %) (%%)
1311 1311  
1312 1312  = 8. AT Commands Combination =
... ... @@ -1314,9 +1314,9 @@
1314 1314  == 8.1 Set a fix RX2DR for downlink window ==
1315 1315  
1316 1316  
1317 -* (% style="color:blue" %)**AT+ADR=0             **(%%) **~/~/**  Disable ADR first
1351 +* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1318 1318  
1319 -* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~/~/**  Set xxxx to your wanted DataRate
1353 +* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1320 1320  
1321 1321  (% style="display:none" %) (%%)
1322 1322  

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0