Last modified by kai on 2024/09/06 10:00
<
From version < 63.43 >
edited by Xiaoling
on 2023/05/29 15:19
To version < 63.39 >
edited by Xiaoling
on 2023/05/29 14:36
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -10,7 +10,6 @@
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 12  * (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 -
14 14  * (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
15 15  
16 16  (((
... ... @@ -22,7 +22,6 @@
22 22  
23 23  
24 24  * **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
25 -
26 26  * **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
27 27  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
28 28  ** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
... ... @@ -36,7 +36,10 @@
36 36  Dragino STM32 base hardware Firmware / LoRaWAN stack list
37 37  
38 38  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:966px" %)
39 -|(% style="background-color:#4f81bd; color:white; width:187px" %)**Model**|(% style="background-color:#4f81bd; color:white; width:330px" %)**Description**|(% style="background-color:#4f81bd; color:white; width:445px" %)**Firmware Version <~-~-> Stack Version**
37 +|(% style="background-color:#4f81bd; color:white; width:187px" %)(((
38 +**Model**)))|(% style="background-color:#4f81bd; color:white; width:330px" %)(((
39 +**Description**)))|(% style="background-color:#4f81bd; color:white; width:445px" %)(((
40 +**Firmware Version <~-~-> Stack Version**)))
40 40  |(% style="width:187px" %)(((
41 41  [[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
42 42  )))|(% style="width:330px" %)(((
... ... @@ -110,7 +110,7 @@
110 110  (% style="color:blue" %)**AT Command: AT+TDC**
111 111  
112 112  (% border="1" style="background-color:#f2f2f2; width:727.222px" %)
113 -|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:329px" %)**Response**
114 +|(% style="background-color:#4F81BD;color:white; width:165px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:227px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:329px" %)**Response**
114 114  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
115 115  OK
116 116  
... ... @@ -121,6 +121,8 @@
121 121  )))
122 122  
123 123  (((
125 +
126 +
124 124  (% style="color:blue" %)**Downlink Command: 0x01**
125 125  
126 126  Format: Command Code (0x01) followed by 3 bytes time value.
... ... @@ -131,7 +131,6 @@
131 131  )))
132 132  
133 133  * **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
134 -
135 135  * **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
136 136  
137 137  (% style="display:none" %) (%%)
... ... @@ -142,10 +142,11 @@
142 142  Feature: Reboot End Node to perform a new OTAA or ABP Join.
143 143  
144 144  
145 -(% style="color:blue" %)**AT Command: ATZ  ~/~/ **(%%)Trig a reset of the MCU
147 +(% style="color:blue" %)**AT Command: ATZ**
146 146  
147 147  (% border="1" style="background-color:#f2f2f2; width:546px" %)
148 -|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:92px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:294px" %)**Response**
150 +|=(% colspan="3" style="width: 543px;background-color:#D9E2F3;color:#0070C0" %)ATZ: Trig a reset of the MCU
151 +|(% style="background-color:#4F81BD;color:white; width:157px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:92px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:294px" %)**Response**
149 149  |(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
150 150  Device reset and show booting info
151 151  
... ... @@ -177,10 +177,11 @@
177 177  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
178 178  
179 179  
180 -(% style="color:blue" %)**AT Command: AT+FDR  ~/~/  **(%%)Reset to factory default
183 +(% style="color:blue" %)**AT Command: AT+FDR**
181 181  
182 182  (% border="1" style="background-color:#f2f2f2; width:789px" %)
183 -|(% style="background-color:#4f81bd; color:white; width:154px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:175px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:456px" %)**Response**
186 +|=(% colspan="3" style="width: 786px;background-color:#D9E2F3;color:#0070C0" %)Reset to factory default
187 +|(% style="background-color:#4F81BD;color:white; width:154px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:175px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:456px" %)**Response**
184 184  |(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
185 185  Device reset to factory default parameters and show booting info
186 186  
... ... @@ -212,10 +212,11 @@
212 212  Feature: Show firmware version. No downlink command yet.
213 213  
214 214  
215 -(% style="color:blue" %)**AT Command: AT+VER  ~/~/   **(%%)Image Version and Frequency Band
219 +(% style="color:blue" %)**AT Command: AT+VER**
216 216  
217 217  (% border="1" style="background-color:#f2f2f2; width:542px" %)
218 -|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:86px" %)**Response**
222 +|=(% colspan="3" style="width: 539px;background-color:#D9E2F3;color:#0070C0" %)AT+VER: Image Version and Frequency Band
223 +|(% style="background-color:#4F81BD;color:white; width:157px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:295px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:86px" %)**Response**
219 219  |(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
220 220  1.3 EU868
221 221  
... ... @@ -235,7 +235,7 @@
235 235  (((
236 236  
237 237  
238 -(% style="color:#037691" %)**xx: Software Type:**
243 +**xx: Software Type:**
239 239  )))
240 240  
241 241  * 0x00 01: LGT92 Version
... ... @@ -245,7 +245,7 @@
245 245  (((
246 246  
247 247  
248 -(% style="color:#037691" %)**yy: Frequency Band:**
253 +**yy: Frequency Band:**
249 249  )))
250 250  
251 251  * 0x01: EU868
... ... @@ -262,7 +262,7 @@
262 262  (((
263 263  
264 264  
265 -(% style="color:#037691" %)**zz: Subband**
270 +**zz: Subband**
266 266  )))
267 267  
268 268  firmware version: v1.1.0 ~-~-> 110
... ... @@ -274,10 +274,11 @@
274 274  Feature: Show All configure. No downlink command yet.
275 275  
276 276  
277 -(% style="color:blue" %)**AT Command: AT+CFG  ~/~/ **(%%)Print all configurations
282 +(% style="color:blue" %)**AT Command: AT+CFG**
278 278  
279 279  (% border="1" style="background-color:#f2f2f2; width:599.222px" %)
280 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:154px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:280px" %)**Response**
285 +|=(% colspan="3" style="width: 596px;background-color:#D9E2F3;color:#0070C0" %)AT+CFG: Print all configurations
286 +|(% style="background-color:#4F81BD;color:white; width:160px" %)**Command Example**|(% style="background-color:#4F81BD;color:white0; width:154px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:280px" %)**Response**
281 281  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
282 282  AT+DEUI = XX XX XX XX XX XX XX XX
283 283  AT+DADDR=XXXXXXXX
... ... @@ -300,7 +300,8 @@
300 300  (% style="color:blue" %)**AT Command: AT+APPEUI**
301 301  
302 302  (% border="1" style="background-color:#f2f2f2; width:686.222px" %)
303 -|(% style="background-color:#4f81bd; color:white; width:305px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:186px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:191px" %)**Response**
309 +|=(% colspan="3" style="width: 683px;background-color:#D9E2F3;color:#0070C0" %)AT+APPEUI
310 +|(% style="background-color:#4F81BD;color:white; width:305px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:186px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:191px" %)**Response**
304 304  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
305 305  OK
306 306  )))
... ... @@ -317,7 +317,8 @@
317 317  (% style="color:blue" %)**AT Command: AT+APPKEY**
318 318  
319 319  (% border="1" style="background-color:#f2f2f2; width:976.222px" %)
320 -|(% style="background-color:#4f81bd; color:white; width:441px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:180px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:350px" %)**Response**
327 +|=(% colspan="3" style="width: 973px;background-color:#D9E2F3;color:#0070C0" %)AT+APPKEY
328 +|(% style="background-color:#4F81BD;color:white; width:441px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:180px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:350px" %)**Response**
321 321  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
322 322  OK
323 323  )))
... ... @@ -334,7 +334,8 @@
334 334  (% style="color:blue" %)**AT Command: AT+APPSKEY**
335 335  
336 336  (% border="1" style="background-color:#f2f2f2; width:1040.22px" %)
337 -|(% style="background-color:#4f81bd; color:white; width:451px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:231px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:354px" %)**Response**
345 +|=(% colspan="3" style="width: 1037px;background-color:#D9E2F3;color:#0070C0" %)AT+APPSKEY
346 +|(% style="background-color:#4F81BD;color:white; width:451px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:231px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:354px" %)**Response**
338 338  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
339 339  OK
340 340  )))
... ... @@ -353,7 +353,8 @@
353 353  (% style="color:blue" %)**AT Command: AT+DADDR**
354 354  
355 355  (% border="1" style="background-color:#f2f2f2; width:795.222px" %)
356 -|(% style="background-color:#4f81bd; color:white; width:192px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:241px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:359px" %)**Response**
365 +|=(% colspan="3" style="width: 792px;background-color:#D9E2F3;color:#0070C0" %)AT+DADDR
366 +|(% style="background-color:#4F81BD;color:white; width:192px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:241px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:359px" %)**Response**
357 357  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
358 358  A8 40 41 FF
359 359  
... ... @@ -372,7 +372,8 @@
372 372  (% style="color:blue" %)**AT Command: AT+DEUI**
373 373  
374 374  (% border="1" style="background-color:#f2f2f2; width:1035.22px" %)
375 -|(% style="background-color:#4f81bd; color:white; width:250px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:634px" %)**Response**
385 +|=(% colspan="3" style="width: 1032px;background-color:#D9E2F3;color:#0070C0" %)AT+DEUI
386 +|(% style="background-color:#4F81BD;color:white; width:250px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:147px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:634px" %)**Response**
376 376  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
377 377  OK
378 378  )))
... ... @@ -391,7 +391,8 @@
391 391  (% style="color:blue" %)**AT Command: AT+NWKID**
392 392  
393 393  (% border="1" style="background-color:#f2f2f2; width:448.222px" %)
394 -|(% style="background-color:#4f81bd; color:white; width:191px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:153px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
405 +|=(% colspan="3" style="width: 445px;background-color:#D9E2F3;color:#0070C0" %)AT+NWKID
406 +|(% style="background-color:#4F81BD;color:white; width:191px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:153px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:101px" %)**Response**
395 395  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
396 396  OK
397 397  )))
... ... @@ -408,7 +408,8 @@
408 408  (% style="color:blue" %)**AT Command: AT+NWKSKEY**
409 409  
410 410  (% border="1" style="background-color:#f2f2f2; width:1017.22px" %)
411 -|(% style="background-color:#4f81bd; color:white; width:455px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:215px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:343px" %)**Response**
423 +|=(% colspan="3" style="width: 1014px;background-color:#D9E2F3;;color:#0070C0" %)AT+NWKSKEY
424 +|(% style="background-color:#4F81BD;color:white; width:455px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:215px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:343px" %)**Response**
412 412  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
413 413  OK
414 414  )))
... ... @@ -429,7 +429,8 @@
429 429  (% style="color:blue" %)**AT Command: AT+CFM**
430 430  
431 431  (% border="1" style="background-color:#f2f2f2; width:710.222px" %)
432 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:205px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:346px" %)**Response**
445 +|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+CFM
446 +|(% style="background-color:#4F81BD;color:white; width:155px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:205px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:346px" %)**Response**
433 433  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
434 434  OK
435 435  )))
... ... @@ -443,7 +443,6 @@
443 443  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
444 444  
445 445  * **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
446 -
447 447  * **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
448 448  
449 449  (% style="display:none" %) (%%)
... ... @@ -454,7 +454,8 @@
454 454  (% style="color:blue" %)**AT Command: AT+CFM**
455 455  
456 456  (% border="1" style="background-color:#f2f2f2; width:710.222px" %)
457 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
470 +|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+CFM
471 +|(% style="background-color:#4F81BD;color:white; width:160px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:198px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:349px" %)**Response**
458 458  |(% style="width:160px" %)(((
459 459  AT+CFM=1,0,0
460 460  
... ... @@ -490,7 +490,6 @@
490 490  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
491 491  
492 492  * **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
493 -
494 494  * **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
495 495  
496 496  (% style="display:none" %) (%%)
... ... @@ -504,7 +504,8 @@
504 504  (% style="color:blue" %)**AT Command: AT+CFS**
505 505  
506 506  (% border="1" style="background-color:#f2f2f2; width:463px" %)
507 -|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
520 +|=(% colspan="3" style="width: 460px;background-color:#D9E2F3;color:#0070C0" %)AT+CFS
521 +|(% style="background-color:#4F81BD;color:white; width:156px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:193px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:107px" %)**Response**
508 508  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
509 509  OK
510 510  )))
... ... @@ -520,7 +520,8 @@
520 520  (% style="color:blue" %)**AT Command: AT+JOIN**
521 521  
522 522  (% border="1" style="background-color:#f2f2f2; width:647.222px" %)
523 -|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:334px" %)**Response**
537 +|=(% colspan="3" style="width: 644px;background-color:#D9E2F3;color:#0070C0" %)AT+JOIN
538 +|(% style="background-color:#4F81BD;color:white; width:163px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:147px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:334px" %)**Response**
524 524  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
525 525  OK
526 526  While Error in format, return AT_BUSY_ERROR
... ... @@ -537,7 +537,8 @@
537 537  (% style="color:blue" %)**AT Command: AT+NJM**
538 538  
539 539  (% border="1" style="background-color:#f2f2f2; width:753.222px" %)
540 -|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
555 +|=(% colspan="3" style="width: 750px;background-color:#D9E2F3;color:#0070C0" %)AT+NJM
556 +|(% style="background-color:#4F81BD;color:white; width:162px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:227px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:361px" %)**Response**
541 541  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
542 542  OK
543 543  )))
... ... @@ -551,7 +551,6 @@
551 551  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
552 552  
553 553  * **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
554 -
555 555  * **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
556 556  
557 557  (% style="display:none" %) (%%)
... ... @@ -565,7 +565,8 @@
565 565  (% style="color:blue" %)**AT Command: AT+NJS**
566 566  
567 567  (% border="1" style="background-color:#f2f2f2; width:498.222px" %)
568 -|(% style="background-color:#4f81bd; color:white; width:169px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:164px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:161px" %)**Response**
583 +|=(% colspan="3" style="width: 495px;background-color:#D9E2F3;color:#0070C0" %)AT+NJS
584 +|(% style="background-color:#4F81BD;color:white; width:169px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:164px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:161px" %)**Response**
569 569  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
570 570  OK
571 571  )))
... ... @@ -581,7 +581,8 @@
581 581  (% style="color:blue" %)**AT Command: AT+RECV**
582 582  
583 583  (% border="1" style="background-color:#f2f2f2; width:587.222px" %)
584 -|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:150px" %)**Response**
600 +|=(% colspan="3" style="width: 584px;background-color:#D9E2F3;color:#0070C0" %)AT+RECV
601 +|(% style="background-color:#4F81BD;color:white; width:161px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:272px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:150px" %)**Response**
585 585  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
586 586  OK
587 587  )))
... ... @@ -597,7 +597,8 @@
597 597  (% style="color:blue" %)**AT Command: AT+RECVB**
598 598  
599 599  (% border="1" style="background-color:#f2f2f2; width:793.222px" %)
600 -|(% style="background-color:#4f81bd; color:white; width:173px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:497px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:120px" %)**Response**
617 +|=(% colspan="3" style="width: 790px;background-color:#D9E2F3;color:#0070C0" %)AT+RECVB
618 +|(% style="background-color:#4F81BD;color:white; width:173px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:497px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:120px" %)**Response**
601 601  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
602 602  OK
603 603  )))
... ... @@ -613,7 +613,8 @@
613 613  (% style="color:blue" %)**AT Command: AT+SEND**
614 614  
615 615  (% border="1" style="background-color:#f2f2f2; width:991.222px" %)
616 -|(% style="background-color:#4f81bd; color:white; width:201px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:340px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:446px" %)**Response**
634 +|=(% colspan="3" style="width: 988px;background-color:#D9E2F3;color:#0070C0" %)AT+SEND
635 +|(% style="background-color:#4F81BD;color:white; width:201px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:340px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:446px" %)**Response**
617 617  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
618 618  While Error in format, return
619 619  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
... ... @@ -629,10 +629,11 @@
629 629  
630 630  (% style="color:blue" %)**AT Command: AT+SENDB**
631 631  
632 -(% border="1" style="width:974px" %)
633 -|(% style="background-color:#4f81bd; color:white; width:257px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:394px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:318px" %)**Response**
634 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)OK
635 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)While Error in format, return(((
651 +(% border="1" style="background-color:f2f2f2; width:1101px" %)
652 +|=(% colspan="3" style="width: 1098px;background-color:#D9E2F3;color:#0070C0" %)AT+SENDB
653 +|(% style="background-color:#4F81BD;color:white; width:257px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:394px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:446px" %)**Response**
654 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
655 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
636 636  AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
637 637  )))
638 638  
... ... @@ -648,13 +648,14 @@
648 648  
649 649  (% style="color:blue" %)**AT Command: AT+ADR**
650 650  
651 -(% border="1" style="width:643px" %)
652 -|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:266px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:209px" %)**Response**
653 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:209px" %)1(((
671 +(% border="1" style="background-color:f2f2f2; width:683.222px" %)
672 +|=(% colspan="3" style="width: 680px;background-color:#D9E2F3;color:#0070C0" %)AT+ADR
673 +|(% style="background-color:#4F81BD;color:white; width:162px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:266px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:250px" %)**Response**
674 +|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
654 654  OK
655 655  )))
656 -|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)OK
657 -|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)While Error in format, return(((
677 +|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK
678 +|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((
658 658  AT_PARAM_ERROR
659 659  )))
660 660  
... ... @@ -663,7 +663,6 @@
663 663  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
664 664  
665 665  * **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
666 -
667 667  * **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
668 668  
669 669  (% style="display:none" %) (%%)
... ... @@ -677,7 +677,8 @@
677 677  (% style="color:blue" %)**AT Command:  AT+CLASS**
678 678  
679 679  (% border="1" style="background-color:#f2f2f2; width:507.222px" %)
680 -|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:166px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:175px" %)**Response**
700 +|=(% colspan="3" style="width: 504px;background-color:#D9E2F3;color:#0070C0" %)AT+CLASS
701 +|(% style="background-color:#4F81BD;color:white; width:163px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:166px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:175px" %)**Response**
681 681  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
682 682  OK
683 683  )))
... ... @@ -695,13 +695,14 @@
695 695  == 7.3 Duty Cycle Setting ==
696 696  
697 697  
698 -Feature: Get or Set the ETSI Duty Cycle setting** : 0**=disable, **1**=enable - Only for testing.
719 +Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
699 699  
700 700  
701 701  (% style="color:blue" %)**AT Command:  AT+DCS**
702 702  
703 703  (% border="1" style="background-color:#f2f2f2; width:515.222px" %)
704 -|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
725 +|=(% colspan="3" style="width: 512px;background-color:#D9E2F3;color:#0070C0" %)AT+DCS
726 +|(% style="background-color:#4F81BD;color:white; width:165px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:239px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:107px" %)**Response**
705 705  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
706 706  OK
707 707  )))
... ... @@ -720,13 +720,13 @@
720 720  **Notice:**
721 721  
722 722  * User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
723 -
724 724  * Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
725 725  
726 726  (% style="color:blue" %)**AT Command: AT+DR**
727 727  
728 728  (% border="1" style="background-color:#f2f2f2; width:466.222px" %)
729 -|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:167px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:140px" %)**Response**
750 +|=(% colspan="3" style="width: 463px;background-color:#D9E2F3;color:#0070C0" %)AT+DR
751 +|(% style="background-color:#4F81BD;color:white; width:156px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:167px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:140px" %)**Response**
730 730  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
731 731  OK
732 732  )))
... ... @@ -739,7 +739,6 @@
739 739  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
740 740  
741 741  * **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
742 -
743 743  * **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
744 744  
745 745  (% style="display:none" %) (%%)
... ... @@ -753,7 +753,8 @@
753 753  (% style="color:blue" %)**AT Command:  AT+FCD**
754 754  
755 755  (% border="1" style="background-color:#f2f2f2; width:693.222px" %)
756 -|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:258px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:269px" %)**Response**
777 +|=(% colspan="3" style="width: 690px;background-color:#D9E2F3;color:#0070C0" %)AT+FCD
778 +|(% style="background-color:#4F81BD;color:white; width:162px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:258px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:269px" %)**Response**
757 757  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
758 758  OK
759 759  )))
... ... @@ -771,7 +771,8 @@
771 771  (% style="color:blue" %)**AT Command:  AT+FCU**
772 772  
773 773  (% border="1" style="background-color:#f2f2f2; width:534.222px" %)
774 -|(% style="background-color:#4f81bd; color:white; width:177px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
796 +|=(% colspan="3" style="width: 531px;background-color:#D9E2F3;color:#0070C0" %)AT+FCU
797 +|(% style="background-color:#4F81BD;color:white; width:177px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:239px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:113px" %)**Response**
775 775  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
776 776  OK
777 777  )))
... ... @@ -790,7 +790,8 @@
790 790  (% style="color:blue" %)**AT Command:  AT+JN1DL**
791 791  
792 792  (% border="1" style="background-color:#f2f2f2; width:537.222px" %)
793 -|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:229px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:140px" %)**Response**
816 +|=(% colspan="3" style="width: 534px;background-color:#D9E2F3;color:#0070C0" %)AT+JN1DL
817 +|(% style="background-color:#4F81BD;color:white; width:164px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:229px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:140px" %)**Response**
794 794  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
795 795  OK
796 796  )))
... ... @@ -809,7 +809,8 @@
809 809  (% style="color:blue" %)**AT Command:  AT+JN2DL**
810 810  
811 811  (% border="1" style="background-color:#f2f2f2; width:538.222px" %)
812 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:228px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:146px" %)**Response**
836 +|=(% colspan="3" style="width: 535px;background-color:#D9E2F3;color:#0070C0" %)AT+JN2DL
837 +|(% style="background-color:#4F81BD;color:white; width:160px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:228px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:146px" %)**Response**
813 813  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
814 814  OK
815 815  )))
... ... @@ -830,7 +830,8 @@
830 830  (% style="color:blue" %)**AT Command:  AT+PNM**
831 831  
832 832  (% border="1" style="background-color:#f2f2f2; width:667.222px" %)
833 -|(% style="background-color:#4f81bd; color:white; width:166px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:225px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Response**
858 +|=(% colspan="3" style="width: 664px;background-color:#D9E2F3;color:#0070C0" %)AT+PNM
859 +|(% style="background-color:#4F81BD;color:white; width:166px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:225px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:272px" %)**Response**
834 834  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
835 835  OK
836 836  )))
... ... @@ -856,7 +856,8 @@
856 856  (% style="color:blue" %)**AT Command: AT+RX1DL**
857 857  
858 858  (% border="1" style="background-color:#f2f2f2; width:408.222px" %)
859 -|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:122px" %)**Response**
885 +|=(% colspan="3" style="width: 405px;background-color:#D9E2F3;color:#0070C0" %)AT+RX1DL
886 +|(% style="background-color:#4F81BD;color:white; width:155px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:128px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:122px" %)**Response**
860 860  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
861 861  OK
862 862  )))
... ... @@ -875,7 +875,8 @@
875 875  (% style="color:blue" %)**AT Command: AT+RX2DL**
876 876  
877 877  (% border="1" style="background-color:#f2f2f2; width:481.222px" %)
878 -|(% style="background-color:#4f81bd; color:white; width:175px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:152px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:150px" %)**Response**
905 +|=(% colspan="3" style="width: 478px;background-color:#D9E2F3;color:#0070C0" %)AT+RX2DL
906 +|(% style="background-color:#4F81BD;color:white; width:175px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:152px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:150px" %)**Response**
879 879  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
880 880  OK
881 881  )))
... ... @@ -894,7 +894,8 @@
894 894  (% style="color:blue" %)**AT Command:  AT+RX2DR**
895 895  
896 896  (% border="1" style="background-color:#f2f2f2; width:525.222px" %)
897 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:232px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:130px" %)**Response**
925 +|=(% colspan="3" style="width: 522px;background-color:#D9E2F3;color:#0070C0" %)AT+RX2DR
926 +|(% style="background-color:#4F81BD;color:white; width:160px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:232px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:130px" %)**Response**
898 898  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
899 899  OK
900 900  )))
... ... @@ -913,7 +913,8 @@
913 913  (% style="color:blue" %)**AT Command:  AT+RX2FQ**
914 914  
915 915  (% border="1" style="background-color:#f2f2f2; width:587.222px" %)
916 -|(% style="background-color:#4f81bd; color:white; width:183px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:240px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:160px" %)**Response**
945 +|=(% colspan="3" style="width: 584px;background-color:#D9E2F3;color:#0070C0" %)AT+RX2FQ
946 +|(% style="background-color:#4F81BD;color:white; width:183px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:240px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:160px" %)**Response**
917 917  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
918 918  OK
919 919  )))
... ... @@ -934,7 +934,8 @@
934 934  (% style="color:blue" %)**AT Command:  AT+TXP**
935 935  
936 936  (% border="1" style="background-color:#f2f2f2; width:465.222px" %)
937 -|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:189px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:112px" %)**Response**
967 +|=(% colspan="3" style="width: 462px;background-color:#D9E2F3;color:#0070C0" %)AT+TXP
968 +|(% style="background-color:#4F81BD;color:white; width:161px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:189px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:112px" %)**Response**
938 938  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
939 939  OK
940 940  )))
... ... @@ -947,7 +947,6 @@
947 947  If the downlink payload=22000100, it means setting the TXP to 0.
948 948  
949 949  * **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
950 -
951 951  * **Example 2**: Downlink Payload: **22000000**  ~/~/ Set AT+TXP=0.
952 952  
953 953  (% style="display:none" %) (%%)
... ... @@ -961,7 +961,8 @@
961 961  (% style="color:blue" %)**AT Command:AT+RSSI**
962 962  
963 963  (% border="1" style="background-color:#f2f2f2; width:557.222px" %)
964 -|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:289px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
994 +|=(% colspan="3" style="width: 554px;background-color:#D9E2F3;color:#0070C0" %)AT+RSSI
995 +|(% style="background-color:#4F81BD;color:white; width:164px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:289px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:100px" %)**Response**
965 965  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
966 966  OK
967 967  )))
... ... @@ -977,7 +977,8 @@
977 977  (% style="color:blue" %)**AT Command:  AT+SNR**
978 978  
979 979  (% border="1" style="background-color:#f2f2f2; width:571.222px" %)
980 -|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:290px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
1011 +|=(% colspan="3" style="width: 568px;background-color:#D9E2F3;color:#0070C0" %)AT+SNR
1012 +|(% style="background-color:#4F81BD;color:white; width:164px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:290px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:113px" %)**Response**
981 981  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
982 982  OK
983 983  )))
... ... @@ -993,7 +993,8 @@
993 993  (% style="color:blue" %)**AT Command: AT+PORT**
994 994  
995 995  (% border="1" style="background-color:#f2f2f2; width:500.222px" %)
996 -|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:204px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Response**
1028 +|=(% colspan="3" style="width: 497px;background-color:#D9E2F3;color:#0070C0" %)AT+PORT
1029 +|(% style="background-color:#4F81BD;color:white; width:157px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:204px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:135px" %)**Response**
997 997  |(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
998 998  OK
999 999  )))
... ... @@ -1006,7 +1006,6 @@
1006 1006  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
1007 1007  
1008 1008  * **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1009 -
1010 1010  * **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1011 1011  
1012 1012  (% style="display:none" %) (%%)
... ... @@ -1020,7 +1020,8 @@
1020 1020  (% style="color:blue" %)**AT Command: AT+CHS**
1021 1021  
1022 1022  (% border="1" style="background-color:#f2f2f2; width:603.222px" %)
1023 -|(% style="background-color:#4f81bd; color:white; width:182px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:122px" %)**Response**
1055 +|=(% colspan="3" style="width: 600px;background-color:#D9E2F3;color:#0070C0" %)AT+CHS
1056 +|(% style="background-color:#4F81BD;color:white; width:182px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:295px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:122px" %)**Response**
1024 1024  |(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
1025 1025  OK
1026 1026  )))
... ... @@ -1037,7 +1037,8 @@
1037 1037  (% style="color:blue" %)**AT Command: AT+CHE**
1038 1038  
1039 1039  (% border="1" style="background-color:#f2f2f2; width:710.222px" %)
1040 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
1073 +|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+CHE
1074 +|(% style="background-color:#4F81BD;color:white; width:160px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:198px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:349px" %)**Response**
1041 1041  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
1042 1042  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
1043 1043  
... ... @@ -1052,7 +1052,6 @@
1052 1052  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1053 1053  
1054 1054  * **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1055 -
1056 1056  * **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1057 1057  
1058 1058  (% style="display:none" %) (%%)
... ... @@ -1066,7 +1066,8 @@
1066 1066  (% style="color:blue" %)**AT Command: AT+RX1WTO**
1067 1067  
1068 1068  (% border="1" style="background-color:#f2f2f2; width:460.222px" %)
1069 -|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:201px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:93px" %)**Response**
1102 +|=(% colspan="3" style="width: 457px;background-color:#D9E2F3;color:#0070C0" %)AT+ RX1WTO
1103 +|(% style="background-color:#4F81BD;color:white; width:163px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:201px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:93px" %)**Response**
1070 1070  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
1071 1071  OK
1072 1072  )))
... ... @@ -1094,7 +1094,8 @@
1094 1094  (% style="color:blue" %)**AT Command: AT+RX2WTO**
1095 1095  
1096 1096  (% border="1" style="background-color:#f2f2f2; width:497.222px" %)
1097 -|(% style="background-color:#4f81bd; color:white; width:190px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:199px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
1131 +|=(% colspan="3" style="width: 494px;background-color:#D9E2F3;color:#0070C0" %)AT+ RX2WTO
1132 +|(% style="background-color:#4F81BD;color:white; width:190px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:199px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:104px" %)**Response**
1098 1098  |(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
1099 1099  OK
1100 1100  )))
... ... @@ -1111,7 +1111,8 @@
1111 1111  (% style="color:blue" %)**AT Command: AT+DWELLT**
1112 1112  
1113 1113  (% border="1" style="background-color:#f2f2f2; width:497.222px" %)
1114 -|(% style="background-color:#4f81bd; color:white; width:183px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:179px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:131px" %)**Response**
1149 +|=(% colspan="3" style="width: 494px;background-color:#D9E2F3;color:#0070C0" %)AT+DWELLT
1150 +|(% style="background-color:#4F81BD;color:white; width:183px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:179px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:131px" %)**Response**
1115 1115  |(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
1116 1116  OK
1117 1117  )))
... ... @@ -1124,7 +1124,6 @@
1124 1124  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1125 1125  
1126 1126  * **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1127 -
1128 1128  * **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1129 1129  
1130 1130  (% style="display:none" %) (%%)
... ... @@ -1138,27 +1138,22 @@
1138 1138  (% style="color:blue" %)**RPL value:**
1139 1139  
1140 1140  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1141 -
1142 1142  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1143 -
1144 1144  * **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1145 -
1146 1146  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1147 -
1148 1148  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1149 1149  
1150 1150  (% style="color:blue" %)**Case Analyes:**
1151 1151  
1152 1152  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1153 -
1154 1154  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1155 -
1156 1156  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1157 1157  
1158 1158  (% style="color:blue" %)**AT Command: AT+RPL**
1159 1159  
1160 1160  (% border="1" style="background-color:#f2f2f2; width:536.222px" %)
1161 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:263px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:109px" %)**Response**
1190 +|=(% colspan="3" style="width: 533px;background-color:#D9E2F3;color:#0070C0" %)AT+RPL
1191 +|(% style="background-color:#4F81BD;color:white; width:160px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:263px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:109px" %)**Response**
1162 1162  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
1163 1163  OK
1164 1164  )))
... ... @@ -1171,7 +1171,6 @@
1171 1171  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1172 1172  
1173 1173  * **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1174 -
1175 1175  * **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1176 1176  
1177 1177  (% style="display:none" %) (%%)
... ... @@ -1182,11 +1182,12 @@
1182 1182  (% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1183 1183  
1184 1184  (% border="1" style="background-color:#f2f2f2; width:589px" %)
1185 -|(% style="background-color:#4f81bd; color:white; width:227px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:300px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:87px" %)**Response**
1186 -|(% style="width:227px" %)AT+SETMAXNBTRANS=1，0|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1214 +|=(% colspan="3" style="width: 586px;background-color:#D9E2F3;color:#0070C0" %)AT+**SETMAXNBTRANS**
1215 +|(% style="background-color:#4F81BD;color:white; width:227px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:300px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:87px" %)**Response**
1216 +|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1187 1187  OK
1188 1188  )))
1189 -|(% style="width:227px" %)AT+SETMAXNBTRANS=？，1|(% style="width:300px" %)(((
1219 +|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1190 1190  value2: 0: uplink fcnt doesn't change for each NBTrans;
1191 1191  
1192 1192  1: uplink fcnt increase by 1 for each NBTrans.
... ... @@ -1203,7 +1203,6 @@
1203 1203  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1204 1204  
1205 1205  * Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1206 -
1207 1207  * Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1208 1208  
1209 1209  (% style="display:none" %) (%%)
... ... @@ -1219,7 +1219,8 @@
1219 1219  * ACK_Timout_2: Unit: min
1220 1220  
1221 1221  (% border="1" style="background-color:#f2f2f2; width:710.222px" %)
1222 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
1251 +|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+**DDETECT**
1252 +|(% style="background-color:#4F81BD;color:white; width:160px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:198px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:349px" %)**Response**
1223 1223  |(% style="width:160px" %)(((
1224 1224  AT+DDETECT=1,1440,2880
1225 1225  
... ... @@ -1255,7 +1255,6 @@
1255 1255  If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1256 1256  
1257 1257  * **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1258 -
1259 1259  ** 0x01 : Flag
1260 1260  ** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1261 1261  ** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
... ... @@ -1269,11 +1269,12 @@
1269 1269  (% style="color:blue" %)**AT Command: AT+PNACKMD**
1270 1270  
1271 1271  (% border="1" style="background-color:#f2f2f2; width:536.222px" %)
1272 -|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:263px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:109px" %)**Response**
1273 -|(% style="width:160px" %)AT+PNACKMD=1|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1301 +|=(% colspan="3" style="width: 533px;background-color:#D9E2F3;color:#0070C0" %)**AT+PNACKMD**
1302 +|(% style="background-color:#4F81BD;color:white; width:160px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:263px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:109px" %)**Response**
1303 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1274 1274  OK
1275 1275  )))
1276 -|(% style="width:160px" %)AT+PNACKMD=0|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1306 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1277 1277  0
1278 1278  OK
1279 1279  )))
... ... @@ -1286,7 +1286,8 @@
1286 1286  (% style="color:blue" %)**AT Command: AT+RJTDC**
1287 1287  
1288 1288  (% border="1" style="background-color:#f2f2f2; width:727.222px" %)
1289 -|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:329px" %)**Response**
1319 +|=(% colspan="3" style="width: 724px;background-color:#D9E2F3;color:#0070C0" %)AT+RJTDC
1320 +|(% style="background-color:#4F81BD;color:white; width:165px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:227px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:329px" %)**Response**
1290 1290  |(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1291 1291  OK
1292 1292  
... ... @@ -1302,10 +1302,9 @@
1302 1302  
1303 1303  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1304 1304  
1305 -* **Example 1:** Downlink Payload: 26000A  ~/~/  Set AT+RJTDC=10
1336 +* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1337 +* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1306 1306  
1307 -* **Example 2: **Downlink Payload: 260002  ~/~/  Set AT+RJTDC=2
1308 -
1309 1309  (% style="display:none" %) (%%)
1310 1310  
1311 1311  = 8. AT Commands Combination =
... ... @@ -1313,9 +1313,9 @@
1313 1313  == 8.1 Set a fix RX2DR for downlink window ==
1314 1314  
1315 1315  
1316 -* (% style="color:blue" %)**AT+ADR=0             **(%%) **~/~/**  Disable ADR first
1346 +* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1317 1317  
1318 -* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~/~/**  Set xxxx to your wanted DataRate
1348 +* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1319 1319  
1320 1320  (% style="display:none" %) (%%)
1321 1321  

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0