Last modified by kai on 2024/09/06 10:00
<
From version < 63.36 >
edited by Xiaoling
on 2023/05/29 14:19
To version < 64.1 >
edited by Bei Jinggeng
on 2023/07/25 15:35
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Xiaoling
1 +XWiki.Bei
Content
... ... @@ -10,6 +10,7 @@
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 12  * (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 +
13 13  * (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 15  (((
... ... @@ -21,6 +21,7 @@
21 21  
22 22  
23 23  * **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
25 +
24 24  * **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
25 25  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 26  ** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
... ... @@ -34,13 +34,7 @@
34 34  Dragino STM32 base hardware Firmware / LoRaWAN stack list
35 35  
36 36  (% border="1" cellspacing="4" style="background-color:#f2f2f2; width:966px" %)
37 -|(% style="background-color:#4f81bd; color:white; width:187px" %)(((
38 -**Model**
39 -)))|(% style="background-color:#4f81bd; color:white; width:330px" %)(((
40 -**Description**
41 -)))|(% style="background-color:#4f81bd; color:white; width:445px" %)(((
42 -**Firmware Version <~-~-> Stack Version**
43 -)))
39 +|(% style="background-color:#4f81bd; color:white; width:187px" %)**Model**|(% style="background-color:#4f81bd; color:white; width:330px" %)**Description**|(% style="background-color:#4f81bd; color:white; width:445px" %)**Firmware Version <~-~-> Stack Version**
44 44  |(% style="width:187px" %)(((
45 45  [[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
46 46  )))|(% style="width:330px" %)(((
... ... @@ -113,8 +113,8 @@
113 113  
114 114  (% style="color:blue" %)**AT Command: AT+TDC**
115 115  
116 -(% border="1" style="background-color:#f2f2f2; width:727.222px" %)
117 -|(% style="background-color:#4F81BD;color:white; width:165px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:227px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:329px" %)**Response**
112 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:727.222px" %)
113 +|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:329px" %)**Response**
118 118  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
119 119  OK
120 120  
... ... @@ -125,8 +125,6 @@
125 125  )))
126 126  
127 127  (((
128 -
129 -
130 130  (% style="color:blue" %)**Downlink Command: 0x01**
131 131  
132 132  Format: Command Code (0x01) followed by 3 bytes time value.
... ... @@ -137,6 +137,7 @@
137 137  )))
138 138  
139 139  * **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
134 +
140 140  * **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
141 141  
142 142  (% style="display:none" %) (%%)
... ... @@ -147,11 +147,10 @@
147 147  Feature: Reboot End Node to perform a new OTAA or ABP Join.
148 148  
149 149  
150 -(% style="color:blue" %)**AT Command: ATZ**
145 +(% style="color:blue" %)**AT Command: ATZ  ~/~/ **(%%)Trig a reset of the MCU
151 151  
152 -(% border="1" style="background-color:#f2f2f2; width:546px" %)
153 -|=(% colspan="3" style="width: 543px;background-color:#D9E2F3;color:#0070C0" %)ATZ: Trig a reset of the MCU
154 -|(% style="color:#0070c0; width:157px" %)**Command Example**|(% style="color:#0070c0; width:92px" %)**Function**|(% style="color:#0070c0; width:294px" %)**Response**
147 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:546px" %)
148 +|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:92px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:294px" %)**Response**
155 155  |(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
156 156  Device reset and show booting info
157 157  
... ... @@ -183,11 +183,10 @@
183 183  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
184 184  
185 185  
186 -(% style="color:blue" %)**AT Command: AT+FDR**
180 +(% style="color:blue" %)**AT Command: AT+FDR  ~/~/  **(%%)Reset to factory default
187 187  
188 -(% border="1" style="background-color:#f2f2f2; width:789px" %)
189 -|=(% colspan="3" style="width: 786px;background-color:#D9E2F3;color:#0070C0" %)Reset to factory default
190 -|(% style="color:#0070c0; width:154px" %)**Command Example**|(% style="color:#0070c0; width:175px" %)**Function**|(% style="color:#0070c0; width:456px" %)**Response**
182 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:789px" %)
183 +|(% style="background-color:#4f81bd; color:white; width:154px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:175px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:456px" %)**Response**
191 191  |(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
192 192  Device reset to factory default parameters and show booting info
193 193  
... ... @@ -219,11 +219,10 @@
219 219  Feature: Show firmware version. No downlink command yet.
220 220  
221 221  
222 -(% style="color:blue" %)**AT Command: AT+VER**
215 +(% style="color:blue" %)**AT Command: AT+VER  ~/~/   **(%%)Image Version and Frequency Band
223 223  
224 -(% border="1" style="background-color:#f2f2f2; width:542px" %)
225 -|=(% colspan="3" style="width: 539px;background-color:#D9E2F3;color:#0070C0" %)AT+VER: Image Version and Frequency Band
226 -|(% style="color:#0070c0; width:157px" %)**Command Example**|(% style="color:#0070c0; width:295px" %)**Function**|(% style="color:#0070c0; width:86px" %)**Response**
217 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:542px" %)
218 +|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:86px" %)**Response**
227 227  |(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
228 228  1.3 EU868
229 229  
... ... @@ -243,7 +243,7 @@
243 243  (((
244 244  
245 245  
246 -**xx: Software Type:**
238 +(% style="color:#037691" %)**xx: Software Type:**
247 247  )))
248 248  
249 249  * 0x00 01: LGT92 Version
... ... @@ -253,7 +253,7 @@
253 253  (((
254 254  
255 255  
256 -**yy: Frequency Band:**
248 +(% style="color:#037691" %)**yy: Frequency Band:**
257 257  )))
258 258  
259 259  * 0x01: EU868
... ... @@ -270,7 +270,7 @@
270 270  (((
271 271  
272 272  
273 -**zz: Subband**
265 +(% style="color:#037691" %)**zz: Subband**
274 274  )))
275 275  
276 276  firmware version: v1.1.0 ~-~-> 110
... ... @@ -282,11 +282,10 @@
282 282  Feature: Show All configure. No downlink command yet.
283 283  
284 284  
285 -(% style="color:blue" %)**AT Command: AT+CFG**
277 +(% style="color:blue" %)**AT Command: AT+CFG  ~/~/ **(%%)Print all configurations
286 286  
287 -(% border="1" style="background-color:#f2f2f2; width:599.222px" %)
288 -|=(% colspan="3" style="width: 596px;background-color:#D9E2F3;color:#0070C0" %)AT+CFG: Print all configurations
289 -|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:154px" %)**Function**|(% style="color:#0070c0; width:280px" %)**Response**
279 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:599.222px" %)
280 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:154px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:280px" %)**Response**
290 290  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
291 291  AT+DEUI = XX XX XX XX XX XX XX XX
292 292  AT+DADDR=XXXXXXXX
... ... @@ -308,13 +308,12 @@
308 308  
309 309  (% style="color:blue" %)**AT Command: AT+APPEUI**
310 310  
311 -(% border="1" style="background-color:#f2f2f2; width:686.222px" %)
312 -|=(% colspan="3" style="width: 683px;background-color:#D9E2F3;color:#0070C0" %)AT+APPEUI
313 -|(% style="color:#0070c0; width:305px" %)**Command Example**|(% style="color:#0070c0; width:186px" %)**Function**|(% style="color:#0070c0; width:191px" %)**Response**
314 -|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
302 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:643px" %)
303 +|(% style="background-color:#4f81bd; color:white; width:272px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:182px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:184px" %)**Response**
304 +|(% style="width:272px" %)AT+APPEUI=?|(% style="width:182px" %)Get the Application EUI|(% style="width:184px" %)00 b3 d5 00 00 00 00 00(((
315 315  OK
316 316  )))
317 -|(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
307 +|(% style="width:272px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:182px" %)Set the Application EUI|(% style="width:184px" %)OK
318 318  
319 319  (% style="display:none" %) (%%)
320 320  
... ... @@ -326,9 +326,8 @@
326 326  
327 327  (% style="color:blue" %)**AT Command: AT+APPKEY**
328 328  
329 -(% border="1" style="background-color:#f2f2f2; width:976.222px" %)
330 -|=(% colspan="3" style="width: 973px;background-color:#D9E2F3;color:#0070C0" %)AT+APPKEY
331 -|(% style="color:#0070c0; width:441px" %)**Command Example**|(% style="color:#0070c0; width:180px" %)**Function**|(% style="color:#0070c0; width:350px" %)**Response**
319 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:976.222px" %)
320 +|(% style="background-color:#4f81bd; color:white; width:441px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:180px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:350px" %)**Response**
332 332  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
333 333  OK
334 334  )))
... ... @@ -344,9 +344,8 @@
344 344  
345 345  (% style="color:blue" %)**AT Command: AT+APPSKEY**
346 346  
347 -(% border="1" style="background-color:#f2f2f2; width:1040.22px" %)
348 -|=(% colspan="3" style="width: 1037px;background-color:#D9E2F3;color:#0070C0" %)AT+APPSKEY
349 -|(% style="color:#0070c0; width:451px" %)**Command Example**|(% style="color:#0070c0; width:231px" %)**Function**|(% style="color:#0070c0; width:354px" %)**Response**
336 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1040.22px" %)
337 +|(% style="background-color:#4f81bd; color:white; width:451px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:231px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:354px" %)**Response**
350 350  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
351 351  OK
352 352  )))
... ... @@ -364,9 +364,8 @@
364 364  
365 365  (% style="color:blue" %)**AT Command: AT+DADDR**
366 366  
367 -(% border="1" style="background-color:#f2f2f2; width:795.222px" %)
368 -|=(% colspan="3" style="width: 792px;background-color:#D9E2F3;color:#0070C0" %)AT+DADDR
369 -|(% style="color:#0070c0; width:192px" %)**Command Example**|(% style="color:#0070c0; width:241px" %)**Function**|(% style="color:#0070c0; width:359px" %)**Response**
355 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:795.222px" %)
356 +|(% style="background-color:#4f81bd; color:white; width:192px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:241px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:359px" %)**Response**
370 370  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
371 371  A8 40 41 FF
372 372  
... ... @@ -384,9 +384,8 @@
384 384  
385 385  (% style="color:blue" %)**AT Command: AT+DEUI**
386 386  
387 -(% border="1" style="background-color:#f2f2f2; width:1035.22px" %)
388 -|=(% colspan="3" style="width: 1032px;background-color:#D9E2F3;color:#0070C0" %)AT+DEUI
389 -|(% style="color:#0070c0; width:250px" %)**Command Example**|(% style="color:#0070c0; width:147px" %)**Function**|(% style="color:#0070c0; width:634px" %)**Response**
374 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1035.22px" %)
375 +|(% style="background-color:#4f81bd; color:white; width:250px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:634px" %)**Response**
390 390  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
391 391  OK
392 392  )))
... ... @@ -404,9 +404,8 @@
404 404  
405 405  (% style="color:blue" %)**AT Command: AT+NWKID**
406 406  
407 -(% border="1" style="background-color:#f2f2f2; width:448.222px" %)
408 -|=(% colspan="3" style="width: 445px;background-color:#D9E2F3;color:#0070C0" %)AT+NWKID
409 -|(% style="color:#0070c0; width:191px" %)**Command Example**|(% style="color:#0070c0; width:153px" %)**Function**|(% style="color:#0070c0; width:101px" %)**Response**
393 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:448.222px" %)
394 +|(% style="background-color:#4f81bd; color:white; width:191px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:153px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
410 410  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
411 411  OK
412 412  )))
... ... @@ -422,9 +422,8 @@
422 422  
423 423  (% style="color:blue" %)**AT Command: AT+NWKSKEY**
424 424  
425 -(% border="1" style="background-color:#f2f2f2; width:1017.22px" %)
426 -|=(% colspan="3" style="width: 1014px;background-color:#D9E2F3;;color:#0070C0" %)AT+NWKSKEY
427 -|(% style="color:#0070c0; width:455px" %)**Command Example**|(% style="color:#0070c0; width:215px" %)**Function**|(% style="color:#0070c0; width:343px" %)**Response**
410 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1017.22px" %)
411 +|(% style="background-color:#4f81bd; color:white; width:455px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:215px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:343px" %)**Response**
428 428  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
429 429  OK
430 430  )))
... ... @@ -444,9 +444,8 @@
444 444  
445 445  (% style="color:blue" %)**AT Command: AT+CFM**
446 446  
447 -(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
448 -|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+CFM
449 -|(% style="color:#0070c0; width:155px" %)**Command Example**|(% style="color:#0070c0; width:205px" %)**Function**|(% style="color:#0070c0; width:346px" %)**Response**
431 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:710.222px" %)
432 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:205px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:346px" %)**Response**
450 450  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
451 451  OK
452 452  )))
... ... @@ -460,6 +460,7 @@
460 460  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
461 461  
462 462  * **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
446 +
463 463  * **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
464 464  
465 465  (% style="display:none" %) (%%)
... ... @@ -469,14 +469,13 @@
469 469  
470 470  (% style="color:blue" %)**AT Command: AT+CFM**
471 471  
472 -(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
473 -|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+CFM
474 -|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:198px" %)**Function**|(% style="color:#0070c0; width:349px" %)**Response**
456 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:462px" %)
457 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
475 475  |(% style="width:160px" %)(((
476 476  AT+CFM=1,0,0
477 477  
478 478  value1
479 -)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
462 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:100px" %)(((
480 480  1
481 481  
482 482  OK
... ... @@ -485,7 +485,7 @@
485 485  AT+CFM=0,?,0
486 486  
487 487  value2
488 -)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
471 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:100px" %)(((
489 489  0~~7
490 490  
491 491  OK
... ... @@ -494,7 +494,7 @@
494 494  AT+CFM=0,0,1
495 495  
496 496  value3
497 -)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
480 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:100px" %)(((
498 498  1
499 499  
500 500  OK
... ... @@ -507,6 +507,7 @@
507 507  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
508 508  
509 509  * **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
493 +
510 510  * **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
511 511  
512 512  (% style="display:none" %) (%%)
... ... @@ -519,9 +519,8 @@
519 519  
520 520  (% style="color:blue" %)**AT Command: AT+CFS**
521 521  
522 -(% border="1" style="background-color:#f2f2f2; width:463px" %)
523 -|=(% colspan="3" style="width: 460px;background-color:#D9E2F3;color:#0070C0" %)AT+CFS
524 -|(% style="color:#0070c0; width:156px" %)**Command Example**|(% style="color:#0070c0; width:193px" %)**Function**|(% style="color:#0070c0; width:107px" %)**Response**
506 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:463px" %)
507 +|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
525 525  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
526 526  OK
527 527  )))
... ... @@ -536,9 +536,8 @@
536 536  
537 537  (% style="color:blue" %)**AT Command: AT+JOIN**
538 538  
539 -(% border="1" style="background-color:#f2f2f2; width:647.222px" %)
540 -|=(% colspan="3" style="width: 644px;background-color:#D9E2F3;color:#0070C0" %)AT+JOIN
541 -|(% style="color:#0070c0; width:163px" %)**Command Example**|(% style="color:#0070c0; width:147px" %)**Function**|(% style="color:#0070c0; width:334px" %)**Response**
522 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:647.222px" %)
523 +|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:334px" %)**Response**
542 542  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
543 543  OK
544 544  While Error in format, return AT_BUSY_ERROR
... ... @@ -554,9 +554,8 @@
554 554  
555 555  (% style="color:blue" %)**AT Command: AT+NJM**
556 556  
557 -(% border="1" style="background-color:#f2f2f2; width:753.222px" %)
558 -|=(% colspan="3" style="width: 750px;background-color:#D9E2F3;color:#0070C0" %)AT+NJM
559 -|(% style="color:#0070c0; width:162px" %)**Command Example**|(% style="color:#0070c0; width:227px" %)**Function**|(% style="color:#0070c0; width:361px" %)**Response**
539 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:753.222px" %)
540 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
560 560  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
561 561  OK
562 562  )))
... ... @@ -570,6 +570,7 @@
570 570  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
571 571  
572 572  * **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
554 +
573 573  * **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
574 574  
575 575  (% style="display:none" %) (%%)
... ... @@ -582,10 +582,9 @@
582 582  
583 583  (% style="color:blue" %)**AT Command: AT+NJS**
584 584  
585 -(% border="1" style="background-color:#f2f2f2; width:498.222px" %)
586 -|=(% colspan="3" style="width: 495px;background-color:#D9E2F3;color:#0070C0" %)AT+NJS
587 -|(% style="color:#0070c0; width:169px" %)**Command Example**|(% style="color:#0070c0; width:164px" %)**Function**|(% style="color:#0070c0; width:161px" %)**Response**
588 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
567 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:435px" %)
568 +|(% style="background-color:#4f81bd; color:white; width:169px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:164px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:97px" %)**Response**
569 +|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:97px" %)0(((
589 589  OK
590 590  )))
591 591  
... ... @@ -599,10 +599,9 @@
599 599  
600 600  (% style="color:blue" %)**AT Command: AT+RECV**
601 601  
602 -(% border="1" style="background-color:#f2f2f2; width:587.222px" %)
603 -|=(% colspan="3" style="width: 584px;background-color:#D9E2F3;color:#0070C0" %)AT+RECV
604 -|(% style="color:#0070c0; width:161px" %)**Command Example**|(% style="color:#0070c0; width:272px" %)**Function**|(% style="color:#0070c0; width:150px" %)**Response**
605 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
583 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:543px" %)
584 +|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
585 +|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:104px" %)0:(((
606 606  OK
607 607  )))
608 608  
... ... @@ -616,9 +616,8 @@
616 616  
617 617  (% style="color:blue" %)**AT Command: AT+RECVB**
618 618  
619 -(% border="1" style="background-color:#f2f2f2; width:793.222px" %)
620 -|=(% colspan="3" style="width: 790px;background-color:#D9E2F3;color:#0070C0" %)AT+RECVB
621 -|(% style="color:#0070c0; width:173px" %)**Command Example**|(% style="color:#0070c0; width:497px" %)**Function**|(% style="color:#0070c0; width:120px" %)**Response**
599 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:793.222px" %)
600 +|(% style="background-color:#4f81bd; color:white; width:173px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:497px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:120px" %)**Response**
622 622  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
623 623  OK
624 624  )))
... ... @@ -625,7 +625,7 @@
625 625  
626 626  (% style="display:none" %) (%%)
627 627  
628 -== 6.8 Send Text Data ==
607 +== 6.8 Send Text Data（Note: The format of this command of LA66 is subject to the manual） ==
629 629  
630 630  
631 631  Feature: Send Text Data<port:data>.
... ... @@ -633,9 +633,8 @@
633 633  
634 634  (% style="color:blue" %)**AT Command: AT+SEND**
635 635  
636 -(% border="1" style="background-color:#f2f2f2; width:991.222px" %)
637 -|=(% colspan="3" style="width: 988px;background-color:#D9E2F3;color:#0070C0" %)AT+SEND
638 -|(% style="color:#0070c0; width:201px" %)**Command Example**|(% style="color:#0070c0; width:340px" %)**Function**|(% style="color:#0070c0; width:446px" %)**Response**
615 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:991.222px" %)
616 +|(% style="background-color:#4f81bd; color:white; width:201px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:340px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:446px" %)**Response**
639 639  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
640 640  While Error in format, return
641 641  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
... ... @@ -643,7 +643,7 @@
643 643  
644 644  (% style="display:none" %) (%%)
645 645  
646 -== 6.9 Send Hexadecimal Data ==
624 +== 6.9 Send Hexadecimal Data（Note: The format of this command of LA66 is subject to the manual） ==
647 647  
648 648  
649 649  Feature: Send hexadecimal data along with the application port.
... ... @@ -651,11 +651,10 @@
651 651  
652 652  (% style="color:blue" %)**AT Command: AT+SENDB**
653 653  
654 -(% border="1" style="background-color:f2f2f2; width:1101px" %)
655 -|=(% colspan="3" style="width: 1098px;background-color:#D9E2F3;color:#0070C0" %)AT+SENDB
656 -|(% style="color:#0070c0; width:257px" %)**Command Example**|(% style="color:#0070c0; width:394px" %)**Function**|(% style="color:#0070c0; width:446px" %)**Response**
657 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
658 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
632 +(% border="1" cellspacing="4" style="width:974px" %)
633 +|(% style="background-color:#4f81bd; color:white; width:257px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:394px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:318px" %)**Response**
634 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)OK
635 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)While Error in format, return(((
659 659  AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
660 660  )))
661 661  
... ... @@ -671,14 +671,13 @@
671 671  
672 672  (% style="color:blue" %)**AT Command: AT+ADR**
673 673  
674 -(% border="1" style="background-color:f2f2f2; width:683.222px" %)
675 -|=(% colspan="3" style="width: 680px;background-color:#D9E2F3;color:#0070C0" %)AT+ADR
676 -|(% style="color:#0070c0; width:162px" %)**Command Example**|(% style="color:#0070c0; width:266px" %)**Function**|(% style="color:#0070c0; width:250px" %)**Response**
677 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
651 +(% border="1" cellspacing="4" style="width:643px" %)
652 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:266px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:209px" %)**Response**
653 +|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:209px" %)1(((
678 678  OK
679 679  )))
680 -|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK
681 -|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((
656 +|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)OK
657 +|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)While Error in format, return(((
682 682  AT_PARAM_ERROR
683 683  )))
684 684  
... ... @@ -687,6 +687,7 @@
687 687  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
688 688  
689 689  * **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
666 +
690 690  * **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
691 691  
692 692  (% style="display:none" %) (%%)
... ... @@ -699,13 +699,12 @@
699 699  
700 700  (% style="color:blue" %)**AT Command:  AT+CLASS**
701 701  
702 -(% border="1" style="background-color:#f2f2f2; width:507.222px" %)
703 -|=(% colspan="3" style="width: 504px;background-color:#D9E2F3;color:#0070C0" %)AT+CLASS
704 -|(% style="color:#0070c0; width:163px" %)**Command Example**|(% style="color:#0070c0; width:166px" %)**Function**|(% style="color:#0070c0; width:175px" %)**Response**
705 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
679 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:428px" %)
680 +|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:166px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:94px" %)**Response**
681 +|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:94px" %)A(((
706 706  OK
707 707  )))
708 -|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((
684 +|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:94px" %)OK(((
709 709  
710 710  )))
711 711  
... ... @@ -719,14 +719,13 @@
719 719  == 7.3 Duty Cycle Setting ==
720 720  
721 721  
722 -Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
698 +Feature: Get or Set the ETSI Duty Cycle setting** : 0**=disable, **1**=enable - Only for testing.
723 723  
724 724  
725 725  (% style="color:blue" %)**AT Command:  AT+DCS**
726 726  
727 -(% border="1" style="background-color:#f2f2f2; width:515.222px" %)
728 -|=(% colspan="3" style="width: 512px;background-color:#D9E2F3;color:#0070C0" %)AT+DCS
729 -|(% style="color:#0070c0; width:165px" %)**Command Example**|(% style="color:#0070c0; width:239px" %)**Function**|(% style="color:#0070c0; width:107px" %)**Response**
703 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515.222px" %)
704 +|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
730 730  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
731 731  OK
732 732  )))
... ... @@ -745,17 +745,17 @@
745 745  **Notice:**
746 746  
747 747  * User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
723 +
748 748  * Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
749 749  
750 750  (% style="color:blue" %)**AT Command: AT+DR**
751 751  
752 -(% border="1" style="background-color:#f2f2f2; width:466.222px" %)
753 -|=(% colspan="3" style="width: 463px;background-color:#D9E2F3;color:#0070C0" %)AT+DR
754 -|(% style="color:#0070c0; width:156px" %)**Command Example**|(% style="color:#0070c0; width:167px" %)**Function**|(% style="color:#0070c0; width:140px" %)**Response**
755 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
728 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:409px" %)
729 +|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
730 +|(% style="width:156px" %)AT+DR=?|(% style="width:147px" %)Get the Data Rate.|(% style="width:100px" %)5(((
756 756  OK
757 757  )))
758 -|(% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((
733 +|(% style="width:156px" %)AT+DR=2|(% style="width:147px" %)Set the Data Rate.|(% style="width:100px" %)OK(((
759 759  
760 760  )))
761 761  
... ... @@ -764,6 +764,7 @@
764 764  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
765 765  
766 766  * **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
742 +
767 767  * **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
768 768  
769 769  (% style="display:none" %) (%%)
... ... @@ -776,9 +776,8 @@
776 776  
777 777  (% style="color:blue" %)**AT Command:  AT+FCD**
778 778  
779 -(% border="1" style="background-color:#f2f2f2; width:693.222px" %)
780 -|=(% colspan="3" style="width: 690px;background-color:#D9E2F3;color:#0070C0" %)AT+FCD
781 -|(% style="color:#0070c0; width:162px" %)**Command Example**|(% style="color:#0070c0; width:258px" %)**Function**|(% style="color:#0070c0; width:269px" %)**Response**
755 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:693.222px" %)
756 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:258px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:269px" %)**Response**
782 782  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
783 783  OK
784 784  )))
... ... @@ -795,9 +795,8 @@
795 795  
796 796  (% style="color:blue" %)**AT Command:  AT+FCU**
797 797  
798 -(% border="1" style="background-color:#f2f2f2; width:534.222px" %)
799 -|=(% colspan="3" style="width: 531px;background-color:#D9E2F3;color:#0070C0" %)AT+FCU
800 -|(% style="color:#0070c0; width:177px" %)**Command Example**|(% style="color:#0070c0; width:239px" %)**Function**|(% style="color:#0070c0; width:113px" %)**Response**
773 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:534.222px" %)
774 +|(% style="background-color:#4f81bd; color:white; width:177px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
801 801  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
802 802  OK
803 803  )))
... ... @@ -815,9 +815,8 @@
815 815  
816 816  (% style="color:blue" %)**AT Command:  AT+JN1DL**
817 817  
818 -(% border="1" style="background-color:#f2f2f2; width:537.222px" %)
819 -|=(% colspan="3" style="width: 534px;background-color:#D9E2F3;color:#0070C0" %)AT+JN1DL
820 -|(% style="color:#0070c0; width:164px" %)**Command Example**|(% style="color:#0070c0; width:229px" %)**Function**|(% style="color:#0070c0; width:140px" %)**Response**
792 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:537.222px" %)
793 +|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:229px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:140px" %)**Response**
821 821  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
822 822  OK
823 823  )))
... ... @@ -835,9 +835,8 @@
835 835  
836 836  (% style="color:blue" %)**AT Command:  AT+JN2DL**
837 837  
838 -(% border="1" style="background-color:#f2f2f2; width:538.222px" %)
839 -|=(% colspan="3" style="width: 535px;background-color:#D9E2F3;color:#0070C0" %)AT+JN2DL
840 -|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:228px" %)**Function**|(% style="color:#0070c0; width:146px" %)**Response**
811 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:538.222px" %)
812 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:228px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:146px" %)**Response**
841 841  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
842 842  OK
843 843  )))
... ... @@ -857,9 +857,8 @@
857 857  
858 858  (% style="color:blue" %)**AT Command:  AT+PNM**
859 859  
860 -(% border="1" style="background-color:#f2f2f2; width:667.222px" %)
861 -|=(% colspan="3" style="width: 664px;background-color:#D9E2F3;color:#0070C0" %)AT+PNM
862 -|(% style="color:#0070c0; width:166px" %)**Command Example**|(% style="color:#0070c0; width:225px" %)**Function**|(% style="color:#0070c0; width:272px" %)**Response**
832 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:667.222px" %)
833 +|(% style="background-color:#4f81bd; color:white; width:166px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:225px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Response**
863 863  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
864 864  OK
865 865  )))
... ... @@ -884,9 +884,8 @@
884 884  
885 885  (% style="color:blue" %)**AT Command: AT+RX1DL**
886 886  
887 -(% border="1" style="background-color:#f2f2f2; width:408.222px" %)
888 -|=(% colspan="3" style="width: 405px;background-color:#D9E2F3;color:#0070C0" %)AT+RX1DL
889 -|(% style="color:#0070c0; width:155px" %)**Command Example**|(% style="color:#0070c0; width:128px" %)**Function**|(% style="color:#0070c0; width:122px" %)**Response**
858 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:408.222px" %)
859 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:122px" %)**Response**
890 890  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
891 891  OK
892 892  )))
... ... @@ -904,9 +904,8 @@
904 904  
905 905  (% style="color:blue" %)**AT Command: AT+RX2DL**
906 906  
907 -(% border="1" style="background-color:#f2f2f2; width:481.222px" %)
908 -|=(% colspan="3" style="width: 478px;background-color:#D9E2F3;color:#0070C0" %)AT+RX2DL
909 -|(% style="color:#0070c0; width:175px" %)**Command Example**|(% style="color:#0070c0; width:152px" %)**Function**|(% style="color:#0070c0; width:150px" %)**Response**
877 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:481.222px" %)
878 +|(% style="background-color:#4f81bd; color:white; width:175px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:152px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:150px" %)**Response**
910 910  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
911 911  OK
912 912  )))
... ... @@ -924,9 +924,8 @@
924 924  
925 925  (% style="color:blue" %)**AT Command:  AT+RX2DR**
926 926  
927 -(% border="1" style="background-color:#f2f2f2; width:525.222px" %)
928 -|=(% colspan="3" style="width: 522px;background-color:#D9E2F3;color:#0070C0" %)AT+RX2DR
929 -|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:232px" %)**Function**|(% style="color:#0070c0; width:130px" %)**Response**
896 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:525.222px" %)
897 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:232px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:130px" %)**Response**
930 930  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
931 931  OK
932 932  )))
... ... @@ -944,9 +944,8 @@
944 944  
945 945  (% style="color:blue" %)**AT Command:  AT+RX2FQ**
946 946  
947 -(% border="1" style="background-color:#f2f2f2; width:587.222px" %)
948 -|=(% colspan="3" style="width: 584px;background-color:#D9E2F3;color:#0070C0" %)AT+RX2FQ
949 -|(% style="color:#0070c0; width:183px" %)**Command Example**|(% style="color:#0070c0; width:240px" %)**Function**|(% style="color:#0070c0; width:160px" %)**Response**
915 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:587.222px" %)
916 +|(% style="background-color:#4f81bd; color:white; width:183px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:240px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:160px" %)**Response**
950 950  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
951 951  OK
952 952  )))
... ... @@ -966,9 +966,8 @@
966 966  
967 967  (% style="color:blue" %)**AT Command:  AT+TXP**
968 968  
969 -(% border="1" style="background-color:#f2f2f2; width:465.222px" %)
970 -|=(% colspan="3" style="width: 462px;background-color:#D9E2F3;color:#0070C0" %)AT+TXP
971 -|(% style="color:#0070c0; width:161px" %)**Command Example**|(% style="color:#0070c0; width:189px" %)**Function**|(% style="color:#0070c0; width:112px" %)**Response**
936 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:465.222px" %)
937 +|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:189px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:112px" %)**Response**
972 972  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
973 973  OK
974 974  )))
... ... @@ -981,6 +981,7 @@
981 981  If the downlink payload=22000100, it means setting the TXP to 0.
982 982  
983 983  * **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
950 +
984 984  * **Example 2**: Downlink Payload: **22000000**  ~/~/ Set AT+TXP=0.
985 985  
986 986  (% style="display:none" %) (%%)
... ... @@ -993,9 +993,8 @@
993 993  
994 994  (% style="color:blue" %)**AT Command:AT+RSSI**
995 995  
996 -(% border="1" style="background-color:#f2f2f2; width:557.222px" %)
997 -|=(% colspan="3" style="width: 554px;background-color:#D9E2F3;color:#0070C0" %)AT+RSSI
998 -|(% style="color:#0070c0; width:164px" %)**Command Example**|(% style="color:#0070c0; width:289px" %)**Function**|(% style="color:#0070c0; width:100px" %)**Response**
963 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:557.222px" %)
964 +|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:289px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
999 999  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
1000 1000  OK
1001 1001  )))
... ... @@ -1010,9 +1010,8 @@
1010 1010  
1011 1011  (% style="color:blue" %)**AT Command:  AT+SNR**
1012 1012  
1013 -(% border="1" style="background-color:#f2f2f2; width:571.222px" %)
1014 -|=(% colspan="3" style="width: 568px;background-color:#D9E2F3;color:#0070C0" %)AT+SNR
1015 -|(% style="color:#0070c0; width:164px" %)**Command Example**|(% style="color:#0070c0; width:290px" %)**Function**|(% style="color:#0070c0; width:113px" %)**Response**
979 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:571.222px" %)
980 +|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:290px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
1016 1016  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
1017 1017  OK
1018 1018  )))
... ... @@ -1027,13 +1027,12 @@
1027 1027  
1028 1028  (% style="color:blue" %)**AT Command: AT+PORT**
1029 1029  
1030 -(% border="1" style="background-color:#f2f2f2; width:500.222px" %)
1031 -|=(% colspan="3" style="width: 497px;background-color:#D9E2F3;color:#0070C0" %)AT+PORT
1032 -|(% style="color:#0070c0; width:157px" %)**Command Example**|(% style="color:#0070c0; width:204px" %)**Function**|(% style="color:#0070c0; width:135px" %)**Response**
1033 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
995 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:459px" %)
996 +|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
997 +|(% style="width:157px" %)AT+PORT=?|(% style="width:193px" %)Get the application port|(% style="width:104px" %)21(((
1034 1034  OK
1035 1035  )))
1036 -|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
1000 +|(% style="width:157px" %)AT+PORT=21|(% style="width:193px" %)Set the application port|(% style="width:104px" %)OK
1037 1037  
1038 1038  (% style="color:blue" %)**Downlink Command: 0x23**
1039 1039  
... ... @@ -1042,6 +1042,7 @@
1042 1042  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
1043 1043  
1044 1044  * **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1009 +
1045 1045  * **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1046 1046  
1047 1047  (% style="display:none" %) (%%)
... ... @@ -1054,13 +1054,12 @@
1054 1054  
1055 1055  (% style="color:blue" %)**AT Command: AT+CHS**
1056 1056  
1057 -(% border="1" style="background-color:#f2f2f2; width:603.222px" %)
1058 -|=(% colspan="3" style="width: 600px;background-color:#D9E2F3;color:#0070C0" %)AT+CHS
1059 -|(% style="color:#0070c0; width:182px" %)**Command Example**|(% style="color:#0070c0; width:295px" %)**Function**|(% style="color:#0070c0; width:122px" %)**Response**
1060 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
1022 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:584px" %)
1023 +|(% style="background-color:#4f81bd; color:white; width:182px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
1024 +|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:101px" %)0(((
1061 1061  OK
1062 1062  )))
1063 -|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
1027 +|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:101px" %)OK
1064 1064  
1065 1065  (% style="display:none" %) (%%)
1066 1066  
... ... @@ -1072,9 +1072,8 @@
1072 1072  
1073 1073  (% style="color:blue" %)**AT Command: AT+CHE**
1074 1074  
1075 -(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
1076 -|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+CHE
1077 -|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:198px" %)**Function**|(% style="color:#0070c0; width:349px" %)**Response**
1039 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:710.222px" %)
1040 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
1078 1078  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
1079 1079  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
1080 1080  
... ... @@ -1089,6 +1089,7 @@
1089 1089  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1090 1090  
1091 1091  * **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1055 +
1092 1092  * **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1093 1093  
1094 1094  (% style="display:none" %) (%%)
... ... @@ -1101,9 +1101,8 @@
1101 1101  
1102 1102  (% style="color:blue" %)**AT Command: AT+RX1WTO**
1103 1103  
1104 -(% border="1" style="background-color:#f2f2f2; width:460.222px" %)
1105 -|=(% colspan="3" style="width: 457px;background-color:#D9E2F3;color:#0070C0" %)AT+ RX1WTO
1106 -|(% style="color:#0070c0; width:163px" %)**Command Example**|(% style="color:#0070c0; width:201px" %)**Function**|(% style="color:#0070c0; width:93px" %)**Response**
1068 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:460.222px" %)
1069 +|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:201px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:93px" %)**Response**
1107 1107  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
1108 1108  OK
1109 1109  )))
... ... @@ -1130,13 +1130,12 @@
1130 1130  
1131 1131  (% style="color:blue" %)**AT Command: AT+RX2WTO**
1132 1132  
1133 -(% border="1" style="background-color:#f2f2f2; width:497.222px" %)
1134 -|=(% colspan="3" style="width: 494px;background-color:#D9E2F3;color:#0070C0" %)AT+ RX2WTO
1135 -|(% style="color:#0070c0; width:190px" %)**Command Example**|(% style="color:#0070c0; width:199px" %)**Function**|(% style="color:#0070c0; width:104px" %)**Response**
1136 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
1096 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:448px" %)
1097 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:192px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:90px" %)**Response**
1098 +|(% style="width:162px" %)AT+RX2WTO=?|(% style="width:192px" %)Get RXwindows2 timeout|(% style="width:90px" %)7(((
1137 1137  OK
1138 1138  )))
1139 -|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1101 +|(% style="width:162px" %)AT+RX2WTO=20|(% style="width:192px" %)Set RXwindows2 timeout|(% style="width:90px" %)OK
1140 1140  
1141 1141  (% style="display:none" %) (%%)
1142 1142  
... ... @@ -1148,13 +1148,12 @@
1148 1148  
1149 1149  (% style="color:blue" %)**AT Command: AT+DWELLT**
1150 1150  
1151 -(% border="1" style="background-color:#f2f2f2; width:497.222px" %)
1152 -|=(% colspan="3" style="width: 494px;background-color:#D9E2F3;color:#0070C0" %)AT+DWELLT
1153 -|(% style="color:#0070c0; width:183px" %)**Command Example**|(% style="color:#0070c0; width:179px" %)**Function**|(% style="color:#0070c0; width:131px" %)**Response**
1154 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
1113 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:419px" %)
1114 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:157px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:95px" %)**Response**
1115 +|(% style="width:162px" %)AT+DWELLT=?|(% style="width:157px" %)Get uplinkdwelltime|(% style="width:95px" %)1(((
1155 1155  OK
1156 1156  )))
1157 -|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
1118 +|(% style="width:162px" %)AT+DWELLT=0|(% style="width:157px" %)Set uplinkdwelltime|(% style="width:95px" %)OK
1158 1158  
1159 1159  (% style="color:blue" %)**Downlink Command: 0x25**
1160 1160  
... ... @@ -1163,6 +1163,7 @@
1163 1163  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1164 1164  
1165 1165  * **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1127 +
1166 1166  * **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1167 1167  
1168 1168  (% style="display:none" %) (%%)
... ... @@ -1176,22 +1176,27 @@
1176 1176  (% style="color:blue" %)**RPL value:**
1177 1177  
1178 1178  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1141 +
1179 1179  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1143 +
1180 1180  * **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1145 +
1181 1181  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1147 +
1182 1182  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1183 1183  
1184 1184  (% style="color:blue" %)**Case Analyes:**
1185 1185  
1186 1186  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1153 +
1187 1187  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1155 +
1188 1188  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1189 1189  
1190 1190  (% style="color:blue" %)**AT Command: AT+RPL**
1191 1191  
1192 -(% border="1" style="background-color:#f2f2f2; width:536.222px" %)
1193 -|=(% colspan="3" style="width: 533px;background-color:#D9E2F3;color:#0070C0" %)AT+RPL
1194 -|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:263px" %)**Function**|(% style="color:#0070c0; width:109px" %)**Response**
1160 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:536.222px" %)
1161 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:263px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:109px" %)**Response**
1195 1195  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
1196 1196  OK
1197 1197  )))
... ... @@ -1204,6 +1204,7 @@
1204 1204  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1205 1205  
1206 1206  * **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1174 +
1207 1207  * **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1208 1208  
1209 1209  (% style="display:none" %) (%%)
... ... @@ -1213,13 +1213,12 @@
1213 1213  
1214 1214  (% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1215 1215  
1216 -(% border="1" style="background-color:#f2f2f2; width:589px" %)
1217 -|=(% colspan="3" style="width: 586px;background-color:#D9E2F3;color:#0070C0" %)AT+**SETMAXNBTRANS**
1218 -|(% style="color:#0070c0; width:227px" %)**Command Example**|(% style="color:#0070c0; width:300px" %)**Function**|(% style="color:#0070c0; width:87px" %)**Response**
1219 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1184 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:589px" %)
1185 +|(% style="background-color:#4f81bd; color:white; width:227px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:300px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:87px" %)**Response**
1186 +|(% style="width:227px" %)AT+SETMAXNBTRANS=1，0|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1220 1220  OK
1221 1221  )))
1222 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1189 +|(% style="width:227px" %)AT+SETMAXNBTRANS=？，1|(% style="width:300px" %)(((
1223 1223  value2: 0: uplink fcnt doesn't change for each NBTrans;
1224 1224  
1225 1225  1: uplink fcnt increase by 1 for each NBTrans.
... ... @@ -1236,6 +1236,7 @@
1236 1236  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1237 1237  
1238 1238  * Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1206 +
1239 1239  * Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1240 1240  
1241 1241  (% style="display:none" %) (%%)
... ... @@ -1248,16 +1248,16 @@
1248 1248  AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
1249 1249  
1250 1250  * ACK_Timout_1: Unit: min
1219 +
1251 1251  * ACK_Timout_2: Unit: min
1252 1252  
1253 -(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
1254 -|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+**DDETECT**
1255 -|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:198px" %)**Function**|(% style="color:#0070c0; width:349px" %)**Response**
1222 +(% border="1" style="background-color:#f2f2f2; width:562px" %)
1223 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
1256 1256  |(% style="width:160px" %)(((
1257 1257  AT+DDETECT=1,1440,2880
1258 1258  
1259 1259  value1
1260 -)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1228 +)))|(% style="width:272px" %)Enable online detect|(% style="width:89px" %)(((
1261 1261  1
1262 1262  
1263 1263  OK
... ... @@ -1266,7 +1266,7 @@
1266 1266  AT+DDETECT=1,?,2880
1267 1267  
1268 1268  value2
1269 -)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1237 +)))|(% style="width:272px" %)Online detection packet sending time|(% style="width:89px" %)(((
1270 1270  
1271 1271  
1272 1272  OK
... ... @@ -1275,7 +1275,7 @@
1275 1275  AT+DDETECT=1,1440,？
1276 1276  
1277 1277  value3
1278 -)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1246 +)))|(% style="width:272px" %)Process rejoin|(% style="width:89px" %)(((
1279 1279  
1280 1280  
1281 1281  OK
... ... @@ -1288,11 +1288,16 @@
1288 1288  If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1289 1289  
1290 1290  * **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1291 -** 0x01 : Flag
1292 -** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1293 -** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
1294 -** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1295 1295  
1260 +*
1261 +** 0x01** : Flag**
1262 +
1263 + **0x05A0 **: ACK_Timout_1 : 1440minutes (24 hours)
1264 +
1265 + **0x0B40 **: ACK_Timout_2 : 2880minutes (48 hours)
1266 +
1267 +* **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1268 +
1296 1296  (% style="display:none" %) (%%)
1297 1297  
1298 1298  == 7.26 Request the server to send an ACK ==
... ... @@ -1300,13 +1300,12 @@
1300 1300  
1301 1301  (% style="color:blue" %)**AT Command: AT+PNACKMD**
1302 1302  
1303 -(% border="1" style="background-color:#f2f2f2; width:536.222px" %)
1304 -|=(% colspan="3" style="width: 533px;background-color:#D9E2F3;color:#0070C0" %)**AT+PNACKMD**
1305 -|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:263px" %)**Function**|(% style="color:#0070c0; width:109px" %)**Response**
1306 -|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1276 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:889px" %)
1277 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:627px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
1278 +|(% style="width:160px" %)AT+PNACKMD=1|(% style="width:627px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:100px" %)1(((
1307 1307  OK
1308 1308  )))
1309 -|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1281 +|(% style="width:160px" %)AT+PNACKMD=0|(% style="width:627px" %)off request the server to send an ACK|(% style="width:100px" %)(((
1310 1310  0
1311 1311  OK
1312 1312  )))
... ... @@ -1318,15 +1318,14 @@
1318 1318  
1319 1319  (% style="color:blue" %)**AT Command: AT+RJTDC**
1320 1320  
1321 -(% border="1" style="background-color:#f2f2f2; width:727.222px" %)
1322 -|=(% colspan="3" style="width: 724px;background-color:#D9E2F3;color:#0070C0" %)AT+RJTDC
1323 -|(% style="color:#0070c0; width:165px" %)**Command Example**|(% style="color:#0070c0; width:227px" %)**Function**|(% style="color:#0070c0; width:329px" %)**Response**
1324 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1293 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:889px" %)
1294 +|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:357px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
1295 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:357px" %)Show the ReJoin data transmission interval in min|(% style="width:361px" %)30(((
1325 1325  OK
1326 1326  
1327 1327  the interval is 30 min
1328 1328  )))
1329 -|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1300 +|(% style="width:165px" %)AT+RJTDC=60|(% style="width:357px" %)Set the ReJoin data transmission interval in min|(% style="width:361px" %)OK(((
1330 1330  Set the ReJoin data transmission interval to 60 min
1331 1331  )))
1332 1332  
... ... @@ -1336,9 +1336,10 @@
1336 1336  
1337 1337  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1338 1338  
1339 -* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1340 -* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1310 +* **Example 1:** Downlink Payload: 26000A  ~/~/  Set AT+RJTDC=10
1341 1341  
1312 +* **Example 2: **Downlink Payload: 260002  ~/~/  Set AT+RJTDC=2
1313 +
1342 1342  (% style="display:none" %) (%%)
1343 1343  
1344 1344  = 8. AT Commands Combination =
... ... @@ -1346,9 +1346,9 @@
1346 1346  == 8.1 Set a fix RX2DR for downlink window ==
1347 1347  
1348 1348  
1349 -* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1321 +* (% style="color:blue" %)**AT+ADR=0             **(%%) **~/~/**  Disable ADR first
1350 1350  
1351 -* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1323 +* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~/~/**  Set xxxx to your wanted DataRate
1352 1352  
1353 1353  (% style="display:none" %) (%%)
1354 1354  

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0