Last modified by kai on 2024/09/06 10:00
<
From version < 63.1 >
edited by Edwin Chen
on 2023/04/05 11:31
To version < 63.45 >
edited by Xiaoling
on 2023/05/29 16:00
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -10,6 +10,7 @@
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 12  * (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 +
13 13  * (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 15  (((
... ... @@ -21,6 +21,7 @@
21 21  
22 22  
23 23  * **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
25 +
24 24  * **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
25 25  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 26  ** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
... ... @@ -31,18 +31,11 @@
31 31  = 3. Support End Node and firmware version =
32 32  
33 33  
34 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
35 -|=(% colspan="3" style="width: 963px;" %)(((
36 36  Dragino STM32 base hardware Firmware / LoRaWAN stack list
37 -)))
37 +
38 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:966px" %)
39 +|(% style="background-color:#4f81bd; color:white; width:187px" %)**Model**|(% style="background-color:#4f81bd; color:white; width:330px" %)**Description**|(% style="background-color:#4f81bd; color:white; width:445px" %)**Firmware Version <~-~-> Stack Version**
38 38  |(% style="width:187px" %)(((
39 -**Model**
40 -)))|(% style="width:330px" %)(((
41 -**Description**
42 -)))|(% style="width:445px" %)(((
43 -**Firmware Version <~-~-> Stack Version**
44 -)))
45 -|(% style="width:187px" %)(((
46 46  [[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
47 47  )))|(% style="width:330px" %)(((
48 48  Open Source Generic LoRaWAN Sensor Node
... ... @@ -114,9 +114,8 @@
114 114  
115 115  (% style="color:blue" %)**AT Command: AT+TDC**
116 116  
117 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
118 -|=(% colspan="3" style="width: 724px;" %)AT+TDC
119 -|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
112 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:727.222px" %)
113 +|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:329px" %)**Response**
120 120  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
121 121  OK
122 122  
... ... @@ -127,8 +127,6 @@
127 127  )))
128 128  
129 129  (((
130 -
131 -
132 132  (% style="color:blue" %)**Downlink Command: 0x01**
133 133  
134 134  Format: Command Code (0x01) followed by 3 bytes time value.
... ... @@ -139,6 +139,7 @@
139 139  )))
140 140  
141 141  * **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
134 +
142 142  * **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
143 143  
144 144  (% style="display:none" %) (%%)
... ... @@ -149,11 +149,10 @@
149 149  Feature: Reboot End Node to perform a new OTAA or ABP Join.
150 150  
151 151  
152 -(% style="color:blue" %)**AT Command: ATZ**
145 +(% style="color:blue" %)**AT Command: ATZ  ~/~/ **(%%)Trig a reset of the MCU
153 153  
154 -(% border="1" style="background-color:#ffffcc; color:green; width:546px" %)
155 -|=(% colspan="3" style="width: 543px;" %)ATZ: Trig a reset of the MCU
156 -|(% style="width:157px" %)**Command Example**|(% style="width:92px" %)**Function**|(% style="width:294px" %)**Response**
147 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:546px" %)
148 +|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:92px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:294px" %)**Response**
157 157  |(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
158 158  Device reset and show booting info
159 159  
... ... @@ -185,11 +185,10 @@
185 185  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
186 186  
187 187  
188 -(% style="color:blue" %)**AT Command: AT+FDR**
180 +(% style="color:blue" %)**AT Command: AT+FDR  ~/~/  **(%%)Reset to factory default
189 189  
190 -(% border="1" style="background-color:#ffffcc; color:green; width:789px" %)
191 -|=(% colspan="3" style="width: 786px;" %)Reset to factory default
192 -|(% style="width:154px" %)**Command Example**|(% style="width:175px" %)**Function**|(% style="width:456px" %)**Response**
182 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:789px" %)
183 +|(% style="background-color:#4f81bd; color:white; width:154px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:175px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:456px" %)**Response**
193 193  |(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
194 194  Device reset to factory default parameters and show booting info
195 195  
... ... @@ -221,11 +221,10 @@
221 221  Feature: Show firmware version. No downlink command yet.
222 222  
223 223  
224 -(% style="color:blue" %)**AT Command: AT+VER**
215 +(% style="color:blue" %)**AT Command: AT+VER  ~/~/   **(%%)Image Version and Frequency Band
225 225  
226 -(% border="1" style="background-color:#ffffcc; color:green; width:542px" %)
227 -|=(% colspan="3" style="width: 539px;" %)AT+VER: Image Version and Frequency Band
228 -|(% style="width:157px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:86px" %)**Response**
217 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:542px" %)
218 +|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:86px" %)**Response**
229 229  |(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
230 230  1.3 EU868
231 231  
... ... @@ -245,7 +245,7 @@
245 245  (((
246 246  
247 247  
248 -**xx: Software Type:**
238 +(% style="color:#037691" %)**xx: Software Type:**
249 249  )))
250 250  
251 251  * 0x00 01: LGT92 Version
... ... @@ -255,7 +255,7 @@
255 255  (((
256 256  
257 257  
258 -**yy: Frequency Band:**
248 +(% style="color:#037691" %)**yy: Frequency Band:**
259 259  )))
260 260  
261 261  * 0x01: EU868
... ... @@ -272,7 +272,7 @@
272 272  (((
273 273  
274 274  
275 -**zz: Subband**
265 +(% style="color:#037691" %)**zz: Subband**
276 276  )))
277 277  
278 278  firmware version: v1.1.0 ~-~-> 110
... ... @@ -284,11 +284,10 @@
284 284  Feature: Show All configure. No downlink command yet.
285 285  
286 286  
287 -(% style="color:blue" %)**AT Command: AT+CFG**
277 +(% style="color:blue" %)**AT Command: AT+CFG  ~/~/ **(%%)Print all configurations
288 288  
289 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
290 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
291 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
279 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:599.222px" %)
280 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:154px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:280px" %)**Response**
292 292  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
293 293  AT+DEUI = XX XX XX XX XX XX XX XX
294 294  AT+DADDR=XXXXXXXX
... ... @@ -310,13 +310,12 @@
310 310  
311 311  (% style="color:blue" %)**AT Command: AT+APPEUI**
312 312  
313 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
314 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI
315 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
316 -|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
302 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:643px" %)
303 +|(% style="background-color:#4f81bd; color:white; width:272px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:182px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:184px" %)**Response**
304 +|(% style="width:272px" %)AT+APPEUI=?|(% style="width:182px" %)Get the Application EUI|(% style="width:184px" %)00 b3 d5 00 00 00 00 00(((
317 317  OK
318 318  )))
319 -|(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
307 +|(% style="width:272px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:182px" %)Set the Application EUI|(% style="width:184px" %)OK
320 320  
321 321  (% style="display:none" %) (%%)
322 322  
... ... @@ -328,9 +328,8 @@
328 328  
329 329  (% style="color:blue" %)**AT Command: AT+APPKEY**
330 330  
331 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
332 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY
333 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
319 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:976.222px" %)
320 +|(% style="background-color:#4f81bd; color:white; width:441px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:180px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:350px" %)**Response**
334 334  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
335 335  OK
336 336  )))
... ... @@ -346,9 +346,8 @@
346 346  
347 347  (% style="color:blue" %)**AT Command: AT+APPSKEY**
348 348  
349 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
350 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
351 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
336 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1040.22px" %)
337 +|(% style="background-color:#4f81bd; color:white; width:451px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:231px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:354px" %)**Response**
352 352  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
353 353  OK
354 354  )))
... ... @@ -366,9 +366,8 @@
366 366  
367 367  (% style="color:blue" %)**AT Command: AT+DADDR**
368 368  
369 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
370 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR
371 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
355 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:795.222px" %)
356 +|(% style="background-color:#4f81bd; color:white; width:192px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:241px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:359px" %)**Response**
372 372  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
373 373  A8 40 41 FF
374 374  
... ... @@ -386,9 +386,8 @@
386 386  
387 387  (% style="color:blue" %)**AT Command: AT+DEUI**
388 388  
389 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
390 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI
391 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
374 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1035.22px" %)
375 +|(% style="background-color:#4f81bd; color:white; width:250px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:634px" %)**Response**
392 392  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
393 393  OK
394 394  )))
... ... @@ -406,9 +406,8 @@
406 406  
407 407  (% style="color:blue" %)**AT Command: AT+NWKID**
408 408  
409 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
410 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID
411 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
393 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:448.222px" %)
394 +|(% style="background-color:#4f81bd; color:white; width:191px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:153px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
412 412  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
413 413  OK
414 414  )))
... ... @@ -424,9 +424,8 @@
424 424  
425 425  (% style="color:blue" %)**AT Command: AT+NWKSKEY**
426 426  
427 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
428 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
429 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
410 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1017.22px" %)
411 +|(% style="background-color:#4f81bd; color:white; width:455px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:215px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:343px" %)**Response**
430 430  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
431 431  OK
432 432  )))
... ... @@ -446,9 +446,8 @@
446 446  
447 447  (% style="color:blue" %)**AT Command: AT+CFM**
448 448  
449 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
450 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
451 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
431 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:710.222px" %)
432 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:205px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:346px" %)**Response**
452 452  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
453 453  OK
454 454  )))
... ... @@ -462,6 +462,7 @@
462 462  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
463 463  
464 464  * **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
446 +
465 465  * **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
466 466  
467 467  (% style="display:none" %) (%%)
... ... @@ -471,14 +471,13 @@
471 471  
472 472  (% style="color:blue" %)**AT Command: AT+CFM**
473 473  
474 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
475 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
476 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
456 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:462px" %)
457 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
477 477  |(% style="width:160px" %)(((
478 478  AT+CFM=1,0,0
479 479  
480 480  value1
481 -)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
462 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:100px" %)(((
482 482  1
483 483  
484 484  OK
... ... @@ -487,7 +487,7 @@
487 487  AT+CFM=0,?,0
488 488  
489 489  value2
490 -)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
471 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:100px" %)(((
491 491  0~~7
492 492  
493 493  OK
... ... @@ -496,7 +496,7 @@
496 496  AT+CFM=0,0,1
497 497  
498 498  value3
499 -)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
480 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:100px" %)(((
500 500  1
501 501  
502 502  OK
... ... @@ -509,6 +509,7 @@
509 509  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
510 510  
511 511  * **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
493 +
512 512  * **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
513 513  
514 514  (% style="display:none" %) (%%)
... ... @@ -521,9 +521,8 @@
521 521  
522 522  (% style="color:blue" %)**AT Command: AT+CFS**
523 523  
524 -(% border="1" style="background-color:#ffffcc; color:green; width:463px" %)
525 -|=(% colspan="3" style="width: 460px;" %)AT+CFS
526 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:107px" %)**Response**
506 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:463px" %)
507 +|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
527 527  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
528 528  OK
529 529  )))
... ... @@ -538,9 +538,8 @@
538 538  
539 539  (% style="color:blue" %)**AT Command: AT+JOIN**
540 540  
541 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
542 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN
543 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
522 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:647.222px" %)
523 +|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:334px" %)**Response**
544 544  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
545 545  OK
546 546  While Error in format, return AT_BUSY_ERROR
... ... @@ -556,9 +556,8 @@
556 556  
557 557  (% style="color:blue" %)**AT Command: AT+NJM**
558 558  
559 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
560 -|=(% colspan="3" style="width: 750px;" %)AT+NJM
561 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
539 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:753.222px" %)
540 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
562 562  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
563 563  OK
564 564  )))
... ... @@ -572,6 +572,7 @@
572 572  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
573 573  
574 574  * **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
554 +
575 575  * **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
576 576  
577 577  (% style="display:none" %) (%%)
... ... @@ -584,10 +584,9 @@
584 584  
585 585  (% style="color:blue" %)**AT Command: AT+NJS**
586 586  
587 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
588 -|=(% colspan="3" style="width: 495px;" %)AT+NJS
589 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
590 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
567 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:435px" %)
568 +|(% style="background-color:#4f81bd; color:white; width:169px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:164px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:97px" %)**Response**
569 +|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:97px" %)0(((
591 591  OK
592 592  )))
593 593  
... ... @@ -601,10 +601,9 @@
601 601  
602 602  (% style="color:blue" %)**AT Command: AT+RECV**
603 603  
604 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
605 -|=(% colspan="3" style="width: 584px;" %)AT+RECV
606 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
607 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
583 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:543px" %)
584 +|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
585 +|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:104px" %)0:(((
608 608  OK
609 609  )))
610 610  
... ... @@ -618,9 +618,8 @@
618 618  
619 619  (% style="color:blue" %)**AT Command: AT+RECVB**
620 620  
621 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
622 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB
623 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
599 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:793.222px" %)
600 +|(% style="background-color:#4f81bd; color:white; width:173px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:497px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:120px" %)**Response**
624 624  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
625 625  OK
626 626  )))
... ... @@ -635,9 +635,8 @@
635 635  
636 636  (% style="color:blue" %)**AT Command: AT+SEND**
637 637  
638 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
639 -|=(% colspan="3" style="width: 988px;" %)AT+SEND
640 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
615 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:991.222px" %)
616 +|(% style="background-color:#4f81bd; color:white; width:201px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:340px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:446px" %)**Response**
641 641  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
642 642  While Error in format, return
643 643  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
... ... @@ -653,11 +653,10 @@
653 653  
654 654  (% style="color:blue" %)**AT Command: AT+SENDB**
655 655  
656 -(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
657 -|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
658 -|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
659 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
660 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
632 +(% border="1" cellspacing="4" style="width:974px" %)
633 +|(% style="background-color:#4f81bd; color:white; width:257px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:394px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:318px" %)**Response**
634 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)OK
635 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)While Error in format, return(((
661 661  AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
662 662  )))
663 663  
... ... @@ -673,14 +673,13 @@
673 673  
674 674  (% style="color:blue" %)**AT Command: AT+ADR**
675 675  
676 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
677 -|=(% colspan="3" style="width: 680px;" %)AT+ADR
678 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
679 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
651 +(% border="1" cellspacing="4" style="width:643px" %)
652 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:266px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:209px" %)**Response**
653 +|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:209px" %)1(((
680 680  OK
681 681  )))
682 -|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK
683 -|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((
656 +|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)OK
657 +|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)While Error in format, return(((
684 684  AT_PARAM_ERROR
685 685  )))
686 686  
... ... @@ -689,6 +689,7 @@
689 689  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
690 690  
691 691  * **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
666 +
692 692  * **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
693 693  
694 694  (% style="display:none" %) (%%)
... ... @@ -701,13 +701,12 @@
701 701  
702 702  (% style="color:blue" %)**AT Command:  AT+CLASS**
703 703  
704 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
705 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS
706 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
707 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
679 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:428px" %)
680 +|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:166px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:94px" %)**Response**
681 +|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:94px" %)A(((
708 708  OK
709 709  )))
710 -|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((
684 +|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:94px" %)OK(((
711 711  
712 712  )))
713 713  
... ... @@ -718,18 +718,16 @@
718 718  * Run AT+FDR before running AT+CLASS=C
719 719  * After change to Class=C, Before OTAA Join Successfule, the end node will still shows to use CLASS=A for OTAA Joined. It will use CLASS=C after OTAA Join Succeccful.
720 720  
721 -
722 722  == 7.3 Duty Cycle Setting ==
723 723  
724 724  
725 -Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
698 +Feature: Get or Set the ETSI Duty Cycle setting** : 0**=disable, **1**=enable - Only for testing.
726 726  
727 727  
728 728  (% style="color:blue" %)**AT Command:  AT+DCS**
729 729  
730 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
731 -|=(% colspan="3" style="width: 512px;" %)AT+DCS
732 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
703 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515.222px" %)
704 +|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
733 733  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
734 734  OK
735 735  )))
... ... @@ -748,17 +748,17 @@
748 748  **Notice:**
749 749  
750 750  * User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
723 +
751 751  * Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
752 752  
753 753  (% style="color:blue" %)**AT Command: AT+DR**
754 754  
755 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
756 -|=(% colspan="3" style="width: 463px;" %)AT+DR
757 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
758 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
728 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:409px" %)
729 +|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
730 +|(% style="width:156px" %)AT+DR=?|(% style="width:147px" %)Get the Data Rate.|(% style="width:100px" %)5(((
759 759  OK
760 760  )))
761 -|(% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((
733 +|(% style="width:156px" %)AT+DR=2|(% style="width:147px" %)Set the Data Rate.|(% style="width:100px" %)OK(((
762 762  
763 763  )))
764 764  
... ... @@ -767,6 +767,7 @@
767 767  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
768 768  
769 769  * **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
742 +
770 770  * **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
771 771  
772 772  (% style="display:none" %) (%%)
... ... @@ -779,9 +779,8 @@
779 779  
780 780  (% style="color:blue" %)**AT Command:  AT+FCD**
781 781  
782 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
783 -|=(% colspan="3" style="width: 690px;" %)AT+FCD
784 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
755 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:693.222px" %)
756 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:258px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:269px" %)**Response**
785 785  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
786 786  OK
787 787  )))
... ... @@ -798,9 +798,8 @@
798 798  
799 799  (% style="color:blue" %)**AT Command:  AT+FCU**
800 800  
801 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
802 -|=(% colspan="3" style="width: 531px;" %)AT+FCU
803 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
773 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:534.222px" %)
774 +|(% style="background-color:#4f81bd; color:white; width:177px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
804 804  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
805 805  OK
806 806  )))
... ... @@ -818,9 +818,8 @@
818 818  
819 819  (% style="color:blue" %)**AT Command:  AT+JN1DL**
820 820  
821 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
822 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
823 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
792 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:537.222px" %)
793 +|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:229px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:140px" %)**Response**
824 824  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
825 825  OK
826 826  )))
... ... @@ -838,9 +838,8 @@
838 838  
839 839  (% style="color:blue" %)**AT Command:  AT+JN2DL**
840 840  
841 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
842 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
843 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
811 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:538.222px" %)
812 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:228px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:146px" %)**Response**
844 844  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
845 845  OK
846 846  )))
... ... @@ -860,9 +860,8 @@
860 860  
861 861  (% style="color:blue" %)**AT Command:  AT+PNM**
862 862  
863 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
864 -|=(% colspan="3" style="width: 664px;" %)AT+PNM
865 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
832 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:667.222px" %)
833 +|(% style="background-color:#4f81bd; color:white; width:166px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:225px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Response**
866 866  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
867 867  OK
868 868  )))
... ... @@ -887,9 +887,8 @@
887 887  
888 888  (% style="color:blue" %)**AT Command: AT+RX1DL**
889 889  
890 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
891 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
892 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
858 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:408.222px" %)
859 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:122px" %)**Response**
893 893  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
894 894  OK
895 895  )))
... ... @@ -907,9 +907,8 @@
907 907  
908 908  (% style="color:blue" %)**AT Command: AT+RX2DL**
909 909  
910 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
911 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
912 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
877 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:481.222px" %)
878 +|(% style="background-color:#4f81bd; color:white; width:175px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:152px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:150px" %)**Response**
913 913  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
914 914  OK
915 915  )))
... ... @@ -927,9 +927,8 @@
927 927  
928 928  (% style="color:blue" %)**AT Command:  AT+RX2DR**
929 929  
930 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
931 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
932 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
896 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:525.222px" %)
897 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:232px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:130px" %)**Response**
933 933  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
934 934  OK
935 935  )))
... ... @@ -947,9 +947,8 @@
947 947  
948 948  (% style="color:blue" %)**AT Command:  AT+RX2FQ**
949 949  
950 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
951 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
952 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
915 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:587.222px" %)
916 +|(% style="background-color:#4f81bd; color:white; width:183px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:240px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:160px" %)**Response**
953 953  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
954 954  OK
955 955  )))
... ... @@ -969,9 +969,8 @@
969 969  
970 970  (% style="color:blue" %)**AT Command:  AT+TXP**
971 971  
972 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
973 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
974 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
936 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:465.222px" %)
937 +|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:189px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:112px" %)**Response**
975 975  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
976 976  OK
977 977  )))
... ... @@ -984,6 +984,7 @@
984 984  If the downlink payload=22000100, it means setting the TXP to 0.
985 985  
986 986  * **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
950 +
987 987  * **Example 2**: Downlink Payload: **22000000**  ~/~/ Set AT+TXP=0.
988 988  
989 989  (% style="display:none" %) (%%)
... ... @@ -996,9 +996,8 @@
996 996  
997 997  (% style="color:blue" %)**AT Command:AT+RSSI**
998 998  
999 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
1000 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
1001 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
963 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:557.222px" %)
964 +|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:289px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
1002 1002  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
1003 1003  OK
1004 1004  )))
... ... @@ -1013,9 +1013,8 @@
1013 1013  
1014 1014  (% style="color:blue" %)**AT Command:  AT+SNR**
1015 1015  
1016 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
1017 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
1018 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
979 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:571.222px" %)
980 +|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:290px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
1019 1019  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
1020 1020  OK
1021 1021  )))
... ... @@ -1030,13 +1030,12 @@
1030 1030  
1031 1031  (% style="color:blue" %)**AT Command: AT+PORT**
1032 1032  
1033 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
1034 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
1035 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
1036 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
995 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:459px" %)
996 +|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
997 +|(% style="width:157px" %)AT+PORT=?|(% style="width:193px" %)Get the application port|(% style="width:104px" %)21(((
1037 1037  OK
1038 1038  )))
1039 -|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
1000 +|(% style="width:157px" %)AT+PORT=21|(% style="width:193px" %)Set the application port|(% style="width:104px" %)OK
1040 1040  
1041 1041  (% style="color:blue" %)**Downlink Command: 0x23**
1042 1042  
... ... @@ -1045,6 +1045,7 @@
1045 1045  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
1046 1046  
1047 1047  * **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1009 +
1048 1048  * **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1049 1049  
1050 1050  (% style="display:none" %) (%%)
... ... @@ -1057,13 +1057,12 @@
1057 1057  
1058 1058  (% style="color:blue" %)**AT Command: AT+CHS**
1059 1059  
1060 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
1061 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
1062 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
1063 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
1022 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:584px" %)
1023 +|(% style="background-color:#4f81bd; color:white; width:182px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
1024 +|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:101px" %)0(((
1064 1064  OK
1065 1065  )))
1066 -|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
1027 +|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:101px" %)OK
1067 1067  
1068 1068  (% style="display:none" %) (%%)
1069 1069  
... ... @@ -1075,9 +1075,8 @@
1075 1075  
1076 1076  (% style="color:blue" %)**AT Command: AT+CHE**
1077 1077  
1078 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1079 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
1080 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1039 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:710.222px" %)
1040 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
1081 1081  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
1082 1082  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
1083 1083  
... ... @@ -1092,6 +1092,7 @@
1092 1092  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1093 1093  
1094 1094  * **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1055 +
1095 1095  * **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1096 1096  
1097 1097  (% style="display:none" %) (%%)
... ... @@ -1104,9 +1104,8 @@
1104 1104  
1105 1105  (% style="color:blue" %)**AT Command: AT+RX1WTO**
1106 1106  
1107 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1108 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1109 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1068 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:460.222px" %)
1069 +|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:201px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:93px" %)**Response**
1110 1110  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
1111 1111  OK
1112 1112  )))
... ... @@ -1133,13 +1133,12 @@
1133 1133  
1134 1134  (% style="color:blue" %)**AT Command: AT+RX2WTO**
1135 1135  
1136 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1137 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1138 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1139 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
1096 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:448px" %)
1097 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:192px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:90px" %)**Response**
1098 +|(% style="width:162px" %)AT+RX2WTO=?|(% style="width:192px" %)Get RXwindows2 timeout|(% style="width:90px" %)7(((
1140 1140  OK
1141 1141  )))
1142 -|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1101 +|(% style="width:162px" %)AT+RX2WTO=20|(% style="width:192px" %)Set RXwindows2 timeout|(% style="width:90px" %)OK
1143 1143  
1144 1144  (% style="display:none" %) (%%)
1145 1145  
... ... @@ -1151,13 +1151,12 @@
1151 1151  
1152 1152  (% style="color:blue" %)**AT Command: AT+DWELLT**
1153 1153  
1154 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1155 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1156 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1157 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
1113 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:419px" %)
1114 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:157px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:95px" %)**Response**
1115 +|(% style="width:162px" %)AT+DWELLT=?|(% style="width:157px" %)Get uplinkdwelltime|(% style="width:95px" %)1(((
1158 1158  OK
1159 1159  )))
1160 -|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
1118 +|(% style="width:162px" %)AT+DWELLT=0|(% style="width:157px" %)Set uplinkdwelltime|(% style="width:95px" %)OK
1161 1161  
1162 1162  (% style="color:blue" %)**Downlink Command: 0x25**
1163 1163  
... ... @@ -1166,6 +1166,7 @@
1166 1166  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1167 1167  
1168 1168  * **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1127 +
1169 1169  * **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1170 1170  
1171 1171  (% style="display:none" %) (%%)
... ... @@ -1176,25 +1176,30 @@
1176 1176  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1177 1177  
1178 1178  
1179 -**RPL value:**
1138 +(% style="color:blue" %)**RPL value:**
1180 1180  
1181 1181  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1141 +
1182 1182  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1143 +
1183 1183  * **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1145 +
1184 1184  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1147 +
1185 1185  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1186 1186  
1187 -**Case Analyes:**
1150 +(% style="color:blue" %)**Case Analyes:**
1188 1188  
1189 1189  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1153 +
1190 1190  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1155 +
1191 1191  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1192 1192  
1193 1193  (% style="color:blue" %)**AT Command: AT+RPL**
1194 1194  
1195 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1196 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1197 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1160 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:536.222px" %)
1161 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:263px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:109px" %)**Response**
1198 1198  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
1199 1199  OK
1200 1200  )))
... ... @@ -1207,6 +1207,7 @@
1207 1207  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1208 1208  
1209 1209  * **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1174 +
1210 1210  * **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1211 1211  
1212 1212  (% style="display:none" %) (%%)
... ... @@ -1216,13 +1216,12 @@
1216 1216  
1217 1217  (% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1218 1218  
1219 -(% border="1" style="background-color:#ffffcc; color:green; width:589px" %)
1220 -|=(% colspan="3" style="width: 586px;" %)AT+**SETMAXNBTRANS**
1221 -|(% style="width:227px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:87px" %)**Response**
1222 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1184 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:589px" %)
1185 +|(% style="background-color:#4f81bd; color:white; width:227px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:300px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:87px" %)**Response**
1186 +|(% style="width:227px" %)AT+SETMAXNBTRANS=1，0|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1223 1223  OK
1224 1224  )))
1225 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1189 +|(% style="width:227px" %)AT+SETMAXNBTRANS=？，1|(% style="width:300px" %)(((
1226 1226  value2: 0: uplink fcnt doesn't change for each NBTrans;
1227 1227  
1228 1228  1: uplink fcnt increase by 1 for each NBTrans.
... ... @@ -1239,6 +1239,7 @@
1239 1239  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1240 1240  
1241 1241  * Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1206 +
1242 1242  * Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1243 1243  
1244 1244  (% style="display:none" %) (%%)
... ... @@ -1253,14 +1253,13 @@
1253 1253  * ACK_Timout_1: Unit: min
1254 1254  * ACK_Timout_2: Unit: min
1255 1255  
1256 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1257 -|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1258 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1221 +(% border="1" style="background-color:#f2f2f2; width:562px" %)
1222 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
1259 1259  |(% style="width:160px" %)(((
1260 1260  AT+DDETECT=1,1440,2880
1261 1261  
1262 1262  value1
1263 -)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1227 +)))|(% style="width:272px" %)Enable online detect|(% style="width:89px" %)(((
1264 1264  1
1265 1265  
1266 1266  OK
... ... @@ -1269,7 +1269,7 @@
1269 1269  AT+DDETECT=1,?,2880
1270 1270  
1271 1271  value2
1272 -)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1236 +)))|(% style="width:272px" %)Online detection packet sending time|(% style="width:89px" %)(((
1273 1273  
1274 1274  
1275 1275  OK
... ... @@ -1278,7 +1278,7 @@
1278 1278  AT+DDETECT=1,1440,？
1279 1279  
1280 1280  value3
1281 -)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1245 +)))|(% style="width:272px" %)Process rejoin|(% style="width:89px" %)(((
1282 1282  
1283 1283  
1284 1284  OK
... ... @@ -1291,6 +1291,8 @@
1291 1291  If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1292 1292  
1293 1293  * **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1258 +
1259 +*
1294 1294  ** 0x01 : Flag
1295 1295  ** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1296 1296  ** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
... ... @@ -1303,13 +1303,12 @@
1303 1303  
1304 1304  (% style="color:blue" %)**AT Command: AT+PNACKMD**
1305 1305  
1306 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1307 -|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1308 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1309 -|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1272 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:889px" %)
1273 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:627px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
1274 +|(% style="width:160px" %)AT+PNACKMD=1|(% style="width:627px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:100px" %)1(((
1310 1310  OK
1311 1311  )))
1312 -|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1277 +|(% style="width:160px" %)AT+PNACKMD=0|(% style="width:627px" %)off request the server to send an ACK|(% style="width:100px" %)(((
1313 1313  0
1314 1314  OK
1315 1315  )))
... ... @@ -1321,15 +1321,14 @@
1321 1321  
1322 1322  (% style="color:blue" %)**AT Command: AT+RJTDC**
1323 1323  
1324 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1325 -|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1326 -|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1327 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1289 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:889px" %)
1290 +|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:357px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
1291 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:357px" %)Show the ReJoin data transmission interval in min|(% style="width:361px" %)30(((
1328 1328  OK
1329 1329  
1330 1330  the interval is 30 min
1331 1331  )))
1332 -|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1296 +|(% style="width:165px" %)AT+RJTDC=60|(% style="width:357px" %)Set the ReJoin data transmission interval in min|(% style="width:361px" %)OK(((
1333 1333  Set the ReJoin data transmission interval to 60 min
1334 1334  )))
1335 1335  
... ... @@ -1339,9 +1339,10 @@
1339 1339  
1340 1340  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1341 1341  
1342 -* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1343 -* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1306 +* **Example 1:** Downlink Payload: 26000A  ~/~/  Set AT+RJTDC=10
1344 1344  
1308 +* **Example 2: **Downlink Payload: 260002  ~/~/  Set AT+RJTDC=2
1309 +
1345 1345  (% style="display:none" %) (%%)
1346 1346  
1347 1347  = 8. AT Commands Combination =
... ... @@ -1349,9 +1349,9 @@
1349 1349  == 8.1 Set a fix RX2DR for downlink window ==
1350 1350  
1351 1351  
1352 -* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1317 +* (% style="color:blue" %)**AT+ADR=0             **(%%) **~/~/**  Disable ADR first
1353 1353  
1354 -* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1319 +* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~/~/**  Set xxxx to your wanted DataRate
1355 1355  
1356 1356  (% style="display:none" %) (%%)
1357 1357  

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0