Last modified by kai on 2024/09/06 10:00
<
From version < 60.9 >
edited by Xiaoling
on 2023/03/27 14:07
To version < 63.43 >
edited by Xiaoling
on 2023/05/29 15:19
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -10,6 +10,7 @@
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 12  * (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 +
13 13  * (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 15  (((
... ... @@ -21,6 +21,7 @@
21 21  
22 22  
23 23  * **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
25 +
24 24  * **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
25 25  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 26  ** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
... ... @@ -31,18 +31,11 @@
31 31  = 3. Support End Node and firmware version =
32 32  
33 33  
34 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
35 -|=(% colspan="3" style="width: 963px;" %)(((
36 36  Dragino STM32 base hardware Firmware / LoRaWAN stack list
37 -)))
37 +
38 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:966px" %)
39 +|(% style="background-color:#4f81bd; color:white; width:187px" %)**Model**|(% style="background-color:#4f81bd; color:white; width:330px" %)**Description**|(% style="background-color:#4f81bd; color:white; width:445px" %)**Firmware Version <~-~-> Stack Version**
38 38  |(% style="width:187px" %)(((
39 -**Model**
40 -)))|(% style="width:330px" %)(((
41 -**Description**
42 -)))|(% style="width:445px" %)(((
43 -**Firmware Version <~-~-> Stack Version**
44 -)))
45 -|(% style="width:187px" %)(((
46 46  [[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
47 47  )))|(% style="width:330px" %)(((
48 48  Open Source Generic LoRaWAN Sensor Node
... ... @@ -114,9 +114,8 @@
114 114  
115 115  (% style="color:blue" %)**AT Command: AT+TDC**
116 116  
117 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
118 -|=(% colspan="3" style="width: 724px;" %)AT+TDC
119 -|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
112 +(% border="1" style="background-color:#f2f2f2; width:727.222px" %)
113 +|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:329px" %)**Response**
120 120  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
121 121  OK
122 122  
... ... @@ -127,8 +127,6 @@
127 127  )))
128 128  
129 129  (((
130 -
131 -
132 132  (% style="color:blue" %)**Downlink Command: 0x01**
133 133  
134 134  Format: Command Code (0x01) followed by 3 bytes time value.
... ... @@ -139,6 +139,7 @@
139 139  )))
140 140  
141 141  * **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
134 +
142 142  * **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
143 143  
144 144  (% style="display:none" %) (%%)
... ... @@ -149,11 +149,10 @@
149 149  Feature: Reboot End Node to perform a new OTAA or ABP Join.
150 150  
151 151  
152 -(% style="color:blue" %)**AT Command: ATZ**
145 +(% style="color:blue" %)**AT Command: ATZ  ~/~/ **(%%)Trig a reset of the MCU
153 153  
154 -(% border="1" style="background-color:#ffffcc; color:green; width:546px" %)
155 -|=(% colspan="3" style="width: 543px;" %)ATZ: Trig a reset of the MCU
156 -|(% style="width:157px" %)**Command Example**|(% style="width:92px" %)**Function**|(% style="width:294px" %)**Response**
147 +(% border="1" style="background-color:#f2f2f2; width:546px" %)
148 +|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:92px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:294px" %)**Response**
157 157  |(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
158 158  Device reset and show booting info
159 159  
... ... @@ -185,11 +185,10 @@
185 185  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
186 186  
187 187  
188 -(% style="color:blue" %)**AT Command: AT+FDR**
180 +(% style="color:blue" %)**AT Command: AT+FDR  ~/~/  **(%%)Reset to factory default
189 189  
190 -(% border="1" style="background-color:#ffffcc; color:green; width:789px" %)
191 -|=(% colspan="3" style="width: 786px;" %)Reset to factory default
192 -|(% style="width:154px" %)**Command Example**|(% style="width:175px" %)**Function**|(% style="width:456px" %)**Response**
182 +(% border="1" style="background-color:#f2f2f2; width:789px" %)
183 +|(% style="background-color:#4f81bd; color:white; width:154px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:175px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:456px" %)**Response**
193 193  |(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
194 194  Device reset to factory default parameters and show booting info
195 195  
... ... @@ -221,11 +221,10 @@
221 221  Feature: Show firmware version. No downlink command yet.
222 222  
223 223  
224 -(% style="color:blue" %)**AT Command: AT+VER**
215 +(% style="color:blue" %)**AT Command: AT+VER  ~/~/   **(%%)Image Version and Frequency Band
225 225  
226 -(% border="1" style="background-color:#ffffcc; color:green; width:542px" %)
227 -|=(% colspan="3" style="width: 539px;" %)AT+VER: Image Version and Frequency Band
228 -|(% style="width:157px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:86px" %)**Response**
217 +(% border="1" style="background-color:#f2f2f2; width:542px" %)
218 +|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:86px" %)**Response**
229 229  |(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
230 230  1.3 EU868
231 231  
... ... @@ -245,7 +245,7 @@
245 245  (((
246 246  
247 247  
248 -**xx: Software Type:**
238 +(% style="color:#037691" %)**xx: Software Type:**
249 249  )))
250 250  
251 251  * 0x00 01: LGT92 Version
... ... @@ -255,7 +255,7 @@
255 255  (((
256 256  
257 257  
258 -**yy: Frequency Band:**
248 +(% style="color:#037691" %)**yy: Frequency Band:**
259 259  )))
260 260  
261 261  * 0x01: EU868
... ... @@ -272,7 +272,7 @@
272 272  (((
273 273  
274 274  
275 -**zz: Subband**
265 +(% style="color:#037691" %)**zz: Subband**
276 276  )))
277 277  
278 278  firmware version: v1.1.0 ~-~-> 110
... ... @@ -284,25 +284,21 @@
284 284  Feature: Show All configure. No downlink command yet.
285 285  
286 286  
287 -(% style="color:blue" %)**AT Command: AT+CFG**
277 +(% style="color:blue" %)**AT Command: AT+CFG  ~/~/ **(%%)Print all configurations
288 288  
289 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
290 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
291 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
279 +(% border="1" style="background-color:#f2f2f2; width:599.222px" %)
280 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:154px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:280px" %)**Response**
292 292  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
293 293  AT+DEUI = XX XX XX XX XX XX XX XX
294 -
295 295  AT+DADDR=XXXXXXXX
296 -
297 297  ……….
298 -
299 299  AT+RX2WTO=X
300 -
301 301  AT+CHS=868100000
302 -
303 303  OK
304 304  )))
305 305  
290 +(% style="display:none" %) (%%)
291 +
306 306  = 5. Keys, IDs and EUIs management =
307 307  
308 308  == 5.1 Application EUI ==
... ... @@ -313,9 +313,8 @@
313 313  
314 314  (% style="color:blue" %)**AT Command: AT+APPEUI**
315 315  
316 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
317 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI
318 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
302 +(% border="1" style="background-color:#f2f2f2; width:686.222px" %)
303 +|(% style="background-color:#4f81bd; color:white; width:305px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:186px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:191px" %)**Response**
319 319  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
320 320  OK
321 321  )))
... ... @@ -331,9 +331,8 @@
331 331  
332 332  (% style="color:blue" %)**AT Command: AT+APPKEY**
333 333  
334 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
335 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY
336 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
319 +(% border="1" style="background-color:#f2f2f2; width:976.222px" %)
320 +|(% style="background-color:#4f81bd; color:white; width:441px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:180px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:350px" %)**Response**
337 337  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
338 338  OK
339 339  )))
... ... @@ -349,9 +349,8 @@
349 349  
350 350  (% style="color:blue" %)**AT Command: AT+APPSKEY**
351 351  
352 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
353 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
354 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
336 +(% border="1" style="background-color:#f2f2f2; width:1040.22px" %)
337 +|(% style="background-color:#4f81bd; color:white; width:451px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:231px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:354px" %)**Response**
355 355  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
356 356  OK
357 357  )))
... ... @@ -369,9 +369,8 @@
369 369  
370 370  (% style="color:blue" %)**AT Command: AT+DADDR**
371 371  
372 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
373 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR
374 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
355 +(% border="1" style="background-color:#f2f2f2; width:795.222px" %)
356 +|(% style="background-color:#4f81bd; color:white; width:192px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:241px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:359px" %)**Response**
375 375  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
376 376  A8 40 41 FF
377 377  
... ... @@ -389,9 +389,8 @@
389 389  
390 390  (% style="color:blue" %)**AT Command: AT+DEUI**
391 391  
392 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
393 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI
394 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
374 +(% border="1" style="background-color:#f2f2f2; width:1035.22px" %)
375 +|(% style="background-color:#4f81bd; color:white; width:250px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:634px" %)**Response**
395 395  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
396 396  OK
397 397  )))
... ... @@ -409,9 +409,8 @@
409 409  
410 410  (% style="color:blue" %)**AT Command: AT+NWKID**
411 411  
412 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
413 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID
414 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
393 +(% border="1" style="background-color:#f2f2f2; width:448.222px" %)
394 +|(% style="background-color:#4f81bd; color:white; width:191px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:153px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
415 415  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
416 416  OK
417 417  )))
... ... @@ -427,9 +427,8 @@
427 427  
428 428  (% style="color:blue" %)**AT Command: AT+NWKSKEY**
429 429  
430 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
431 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
432 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
410 +(% border="1" style="background-color:#f2f2f2; width:1017.22px" %)
411 +|(% style="background-color:#4f81bd; color:white; width:455px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:215px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:343px" %)**Response**
433 433  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
434 434  OK
435 435  )))
... ... @@ -449,9 +449,8 @@
449 449  
450 450  (% style="color:blue" %)**AT Command: AT+CFM**
451 451  
452 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
453 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
454 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
431 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
432 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:205px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:346px" %)**Response**
455 455  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
456 456  OK
457 457  )))
... ... @@ -465,6 +465,7 @@
465 465  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
466 466  
467 467  * **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
446 +
468 468  * **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
469 469  
470 470  (% style="display:none" %) (%%)
... ... @@ -474,9 +474,8 @@
474 474  
475 475  (% style="color:blue" %)**AT Command: AT+CFM**
476 476  
477 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
478 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
479 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
456 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
457 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
480 480  |(% style="width:160px" %)(((
481 481  AT+CFM=1,0,0
482 482  
... ... @@ -512,6 +512,7 @@
512 512  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
513 513  
514 514  * **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
493 +
515 515  * **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
516 516  
517 517  (% style="display:none" %) (%%)
... ... @@ -524,13 +524,14 @@
524 524  
525 525  (% style="color:blue" %)**AT Command: AT+CFS**
526 526  
527 -(% border="1" style="background-color:#ffffcc; color:green; width:463px" %)
528 -|=(% colspan="3" style="width: 460px;" %)AT+CFS
529 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:107px" %)**Response**
506 +(% border="1" style="background-color:#f2f2f2; width:463px" %)
507 +|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
530 530  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
531 531  OK
532 532  )))
533 533  
512 +(% style="display:none" %) (%%)
513 +
534 534  == 6.3 Join LoRa® Network ==
535 535  
536 536  
... ... @@ -539,15 +539,15 @@
539 539  
540 540  (% style="color:blue" %)**AT Command: AT+JOIN**
541 541  
542 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
543 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN
544 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
522 +(% border="1" style="background-color:#f2f2f2; width:647.222px" %)
523 +|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:334px" %)**Response**
545 545  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
546 546  OK
547 -
548 548  While Error in format, return AT_BUSY_ERROR
549 549  )))
550 550  
529 +(% style="display:none" %) (%%)
530 +
551 551  == 6.4 LoRa® Network Join Mode ==
552 552  
553 553  
... ... @@ -556,9 +556,8 @@
556 556  
557 557  (% style="color:blue" %)**AT Command: AT+NJM**
558 558  
559 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
560 -|=(% colspan="3" style="width: 750px;" %)AT+NJM
561 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
539 +(% border="1" style="background-color:#f2f2f2; width:753.222px" %)
540 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
562 562  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
563 563  OK
564 564  )))
... ... @@ -572,6 +572,7 @@
572 572  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
573 573  
574 574  * **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
554 +
575 575  * **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
576 576  
577 577  (% style="display:none" %) (%%)
... ... @@ -584,9 +584,8 @@
584 584  
585 585  (% style="color:blue" %)**AT Command: AT+NJS**
586 586  
587 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
588 -|=(% colspan="3" style="width: 495px;" %)AT+NJS
589 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
567 +(% border="1" style="background-color:#f2f2f2; width:498.222px" %)
568 +|(% style="background-color:#4f81bd; color:white; width:169px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:164px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:161px" %)**Response**
590 590  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
591 591  OK
592 592  )))
... ... @@ -601,9 +601,8 @@
601 601  
602 602  (% style="color:blue" %)**AT Command: AT+RECV**
603 603  
604 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
605 -|=(% colspan="3" style="width: 584px;" %)AT+RECV
606 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
583 +(% border="1" style="background-color:#f2f2f2; width:587.222px" %)
584 +|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:150px" %)**Response**
607 607  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
608 608  OK
609 609  )))
... ... @@ -618,9 +618,8 @@
618 618  
619 619  (% style="color:blue" %)**AT Command: AT+RECVB**
620 620  
621 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
622 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB
623 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
599 +(% border="1" style="background-color:#f2f2f2; width:793.222px" %)
600 +|(% style="background-color:#4f81bd; color:white; width:173px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:497px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:120px" %)**Response**
624 624  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
625 625  OK
626 626  )))
... ... @@ -635,9 +635,8 @@
635 635  
636 636  (% style="color:blue" %)**AT Command: AT+SEND**
637 637  
638 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
639 -|=(% colspan="3" style="width: 988px;" %)AT+SEND
640 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
615 +(% border="1" style="background-color:#f2f2f2; width:991.222px" %)
616 +|(% style="background-color:#4f81bd; color:white; width:201px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:340px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:446px" %)**Response**
641 641  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
642 642  While Error in format, return
643 643  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
... ... @@ -653,11 +653,10 @@
653 653  
654 654  (% style="color:blue" %)**AT Command: AT+SENDB**
655 655  
656 -(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
657 -|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
658 -|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
659 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
660 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
632 +(% border="1" style="width:974px" %)
633 +|(% style="background-color:#4f81bd; color:white; width:257px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:394px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:318px" %)**Response**
634 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)OK
635 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)While Error in format, return(((
661 661  AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
662 662  )))
663 663  
... ... @@ -673,14 +673,13 @@
673 673  
674 674  (% style="color:blue" %)**AT Command: AT+ADR**
675 675  
676 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
677 -|=(% colspan="3" style="width: 680px;" %)AT+ADR
678 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
679 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
651 +(% border="1" style="width:643px" %)
652 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:266px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:209px" %)**Response**
653 +|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:209px" %)1(((
680 680  OK
681 681  )))
682 -|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK
683 -|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((
656 +|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)OK
657 +|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)While Error in format, return(((
684 684  AT_PARAM_ERROR
685 685  )))
686 686  
... ... @@ -689,6 +689,7 @@
689 689  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
690 690  
691 691  * **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
666 +
692 692  * **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
693 693  
694 694  (% style="display:none" %) (%%)
... ... @@ -701,9 +701,8 @@
701 701  
702 702  (% style="color:blue" %)**AT Command:  AT+CLASS**
703 703  
704 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
705 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS
706 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
679 +(% border="1" style="background-color:#f2f2f2; width:507.222px" %)
680 +|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:166px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:175px" %)**Response**
707 707  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
708 708  OK
709 709  )))
... ... @@ -711,19 +711,23 @@
711 711  
712 712  )))
713 713  
714 -(% style="display:none" %) (%%)
688 +(% style="display:none" %)
715 715  
690 +(% style="color:red" %)**Notice:**
691 +
692 +* Run AT+FDR before running AT+CLASS=C
693 +* After change to Class=C, Before OTAA Join Successfule, the end node will still shows to use CLASS=A for OTAA Joined. It will use CLASS=C after OTAA Join Succeccful.
694 +
716 716  == 7.3 Duty Cycle Setting ==
717 717  
718 718  
719 -Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
698 +Feature: Get or Set the ETSI Duty Cycle setting** : 0**=disable, **1**=enable - Only for testing.
720 720  
721 721  
722 722  (% style="color:blue" %)**AT Command:  AT+DCS**
723 723  
724 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
725 -|=(% colspan="3" style="width: 512px;" %)AT+DCS
726 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
703 +(% border="1" style="background-color:#f2f2f2; width:515.222px" %)
704 +|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
727 727  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
728 728  OK
729 729  )))
... ... @@ -742,13 +742,13 @@
742 742  **Notice:**
743 743  
744 744  * User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
723 +
745 745  * Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
746 746  
747 747  (% style="color:blue" %)**AT Command: AT+DR**
748 748  
749 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
750 -|=(% colspan="3" style="width: 463px;" %)AT+DR
751 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
728 +(% border="1" style="background-color:#f2f2f2; width:466.222px" %)
729 +|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:167px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:140px" %)**Response**
752 752  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
753 753  OK
754 754  )))
... ... @@ -761,6 +761,7 @@
761 761  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
762 762  
763 763  * **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
742 +
764 764  * **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
765 765  
766 766  (% style="display:none" %) (%%)
... ... @@ -773,9 +773,8 @@
773 773  
774 774  (% style="color:blue" %)**AT Command:  AT+FCD**
775 775  
776 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
777 -|=(% colspan="3" style="width: 690px;" %)AT+FCD
778 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
755 +(% border="1" style="background-color:#f2f2f2; width:693.222px" %)
756 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:258px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:269px" %)**Response**
779 779  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
780 780  OK
781 781  )))
... ... @@ -783,6 +783,8 @@
783 783  OK
784 784  )))
785 785  
764 +(% style="display:none" %) (%%)
765 +
786 786  == 7.6 Frame Counter Uplink ==
787 787  
788 788  Feature: Get or Set the Frame Counter Uplink.
... ... @@ -790,9 +790,8 @@
790 790  
791 791  (% style="color:blue" %)**AT Command:  AT+FCU**
792 792  
793 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
794 -|=(% colspan="3" style="width: 531px;" %)AT+FCU
795 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
773 +(% border="1" style="background-color:#f2f2f2; width:534.222px" %)
774 +|(% style="background-color:#4f81bd; color:white; width:177px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
796 796  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
797 797  OK
798 798  )))
... ... @@ -810,9 +810,8 @@
810 810  
811 811  (% style="color:blue" %)**AT Command:  AT+JN1DL**
812 812  
813 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
814 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
815 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
792 +(% border="1" style="background-color:#f2f2f2; width:537.222px" %)
793 +|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:229px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:140px" %)**Response**
816 816  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
817 817  OK
818 818  )))
... ... @@ -830,9 +830,8 @@
830 830  
831 831  (% style="color:blue" %)**AT Command:  AT+JN2DL**
832 832  
833 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
834 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
835 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
811 +(% border="1" style="background-color:#f2f2f2; width:538.222px" %)
812 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:228px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:146px" %)**Response**
836 836  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
837 837  OK
838 838  )))
... ... @@ -852,9 +852,8 @@
852 852  
853 853  (% style="color:blue" %)**AT Command:  AT+PNM**
854 854  
855 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
856 -|=(% colspan="3" style="width: 664px;" %)AT+PNM
857 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
832 +(% border="1" style="background-color:#f2f2f2; width:667.222px" %)
833 +|(% style="background-color:#4f81bd; color:white; width:166px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:225px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Response**
858 858  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
859 859  OK
860 860  )))
... ... @@ -879,9 +879,8 @@
879 879  
880 880  (% style="color:blue" %)**AT Command: AT+RX1DL**
881 881  
882 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
883 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
884 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
858 +(% border="1" style="background-color:#f2f2f2; width:408.222px" %)
859 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:122px" %)**Response**
885 885  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
886 886  OK
887 887  )))
... ... @@ -899,9 +899,8 @@
899 899  
900 900  (% style="color:blue" %)**AT Command: AT+RX2DL**
901 901  
902 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
903 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
904 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
877 +(% border="1" style="background-color:#f2f2f2; width:481.222px" %)
878 +|(% style="background-color:#4f81bd; color:white; width:175px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:152px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:150px" %)**Response**
905 905  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
906 906  OK
907 907  )))
... ... @@ -919,9 +919,8 @@
919 919  
920 920  (% style="color:blue" %)**AT Command:  AT+RX2DR**
921 921  
922 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
923 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
924 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
896 +(% border="1" style="background-color:#f2f2f2; width:525.222px" %)
897 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:232px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:130px" %)**Response**
925 925  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
926 926  OK
927 927  )))
... ... @@ -939,9 +939,8 @@
939 939  
940 940  (% style="color:blue" %)**AT Command:  AT+RX2FQ**
941 941  
942 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
943 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
944 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
915 +(% border="1" style="background-color:#f2f2f2; width:587.222px" %)
916 +|(% style="background-color:#4f81bd; color:white; width:183px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:240px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:160px" %)**Response**
945 945  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
946 946  OK
947 947  )))
... ... @@ -961,9 +961,8 @@
961 961  
962 962  (% style="color:blue" %)**AT Command:  AT+TXP**
963 963  
964 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
965 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
966 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
936 +(% border="1" style="background-color:#f2f2f2; width:465.222px" %)
937 +|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:189px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:112px" %)**Response**
967 967  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
968 968  OK
969 969  )))
... ... @@ -976,8 +976,9 @@
976 976  If the downlink payload=22000100, it means setting the TXP to 0.
977 977  
978 978  * **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
979 -* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+TXP=0.
980 980  
951 +* **Example 2**: Downlink Payload: **22000000**  ~/~/ Set AT+TXP=0.
952 +
981 981  (% style="display:none" %) (%%)
982 982  
983 983  == 7.15 RSSI of the Last Received Packet ==
... ... @@ -988,9 +988,8 @@
988 988  
989 989  (% style="color:blue" %)**AT Command:AT+RSSI**
990 990  
991 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
992 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
993 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
963 +(% border="1" style="background-color:#f2f2f2; width:557.222px" %)
964 +|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:289px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
994 994  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
995 995  OK
996 996  )))
... ... @@ -1005,9 +1005,8 @@
1005 1005  
1006 1006  (% style="color:blue" %)**AT Command:  AT+SNR**
1007 1007  
1008 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
1009 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
1010 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
979 +(% border="1" style="background-color:#f2f2f2; width:571.222px" %)
980 +|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:290px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
1011 1011  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
1012 1012  OK
1013 1013  )))
... ... @@ -1022,9 +1022,8 @@
1022 1022  
1023 1023  (% style="color:blue" %)**AT Command: AT+PORT**
1024 1024  
1025 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
1026 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
1027 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
995 +(% border="1" style="background-color:#f2f2f2; width:500.222px" %)
996 +|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:204px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Response**
1028 1028  |(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
1029 1029  OK
1030 1030  )))
... ... @@ -1037,6 +1037,7 @@
1037 1037  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
1038 1038  
1039 1039  * **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1009 +
1040 1040  * **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1041 1041  
1042 1042  (% style="display:none" %) (%%)
... ... @@ -1049,9 +1049,8 @@
1049 1049  
1050 1050  (% style="color:blue" %)**AT Command: AT+CHS**
1051 1051  
1052 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
1053 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
1054 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
1022 +(% border="1" style="background-color:#f2f2f2; width:603.222px" %)
1023 +|(% style="background-color:#4f81bd; color:white; width:182px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:122px" %)**Response**
1055 1055  |(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
1056 1056  OK
1057 1057  )))
... ... @@ -1067,9 +1067,8 @@
1067 1067  
1068 1068  (% style="color:blue" %)**AT Command: AT+CHE**
1069 1069  
1070 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1071 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
1072 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1039 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
1040 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
1073 1073  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
1074 1074  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
1075 1075  
... ... @@ -1084,6 +1084,7 @@
1084 1084  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1085 1085  
1086 1086  * **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1055 +
1087 1087  * **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1088 1088  
1089 1089  (% style="display:none" %) (%%)
... ... @@ -1096,9 +1096,8 @@
1096 1096  
1097 1097  (% style="color:blue" %)**AT Command: AT+RX1WTO**
1098 1098  
1099 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1100 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1101 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1068 +(% border="1" style="background-color:#f2f2f2; width:460.222px" %)
1069 +|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:201px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:93px" %)**Response**
1102 1102  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
1103 1103  OK
1104 1104  )))
... ... @@ -1125,9 +1125,8 @@
1125 1125  
1126 1126  (% style="color:blue" %)**AT Command: AT+RX2WTO**
1127 1127  
1128 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1129 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1130 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1096 +(% border="1" style="background-color:#f2f2f2; width:497.222px" %)
1097 +|(% style="background-color:#4f81bd; color:white; width:190px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:199px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
1131 1131  |(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
1132 1132  OK
1133 1133  )))
... ... @@ -1143,9 +1143,8 @@
1143 1143  
1144 1144  (% style="color:blue" %)**AT Command: AT+DWELLT**
1145 1145  
1146 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1147 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1148 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1113 +(% border="1" style="background-color:#f2f2f2; width:497.222px" %)
1114 +|(% style="background-color:#4f81bd; color:white; width:183px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:179px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:131px" %)**Response**
1149 1149  |(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
1150 1150  OK
1151 1151  )))
... ... @@ -1158,6 +1158,7 @@
1158 1158  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1159 1159  
1160 1160  * **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1127 +
1161 1161  * **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1162 1162  
1163 1163  (% style="display:none" %) (%%)
... ... @@ -1168,25 +1168,30 @@
1168 1168  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1169 1169  
1170 1170  
1171 -**RPL value:**
1138 +(% style="color:blue" %)**RPL value:**
1172 1172  
1173 1173  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1141 +
1174 1174  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1143 +
1175 1175  * **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1145 +
1176 1176  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1147 +
1177 1177  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1178 1178  
1179 -**Case Analyes:**
1150 +(% style="color:blue" %)**Case Analyes:**
1180 1180  
1181 1181  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1153 +
1182 1182  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1155 +
1183 1183  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1184 1184  
1185 1185  (% style="color:blue" %)**AT Command: AT+RPL**
1186 1186  
1187 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1188 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1189 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1160 +(% border="1" style="background-color:#f2f2f2; width:536.222px" %)
1161 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:263px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:109px" %)**Response**
1190 1190  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
1191 1191  OK
1192 1192  )))
... ... @@ -1199,6 +1199,7 @@
1199 1199  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1200 1200  
1201 1201  * **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1174 +
1202 1202  * **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1203 1203  
1204 1204  (% style="display:none" %) (%%)
... ... @@ -1208,13 +1208,12 @@
1208 1208  
1209 1209  (% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1210 1210  
1211 -(% border="1" style="background-color:#ffffcc; color:green; width:589px" %)
1212 -|=(% colspan="3" style="width: 586px;" %)AT+**SETMAXNBTRANS**
1213 -|(% style="width:227px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:87px" %)**Response**
1214 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1184 +(% border="1" style="background-color:#f2f2f2; width:589px" %)
1185 +|(% style="background-color:#4f81bd; color:white; width:227px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:300px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:87px" %)**Response**
1186 +|(% style="width:227px" %)AT+SETMAXNBTRANS=1，0|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1215 1215  OK
1216 1216  )))
1217 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1189 +|(% style="width:227px" %)AT+SETMAXNBTRANS=？，1|(% style="width:300px" %)(((
1218 1218  value2: 0: uplink fcnt doesn't change for each NBTrans;
1219 1219  
1220 1220  1: uplink fcnt increase by 1 for each NBTrans.
... ... @@ -1231,6 +1231,7 @@
1231 1231  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1232 1232  
1233 1233  * Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1206 +
1234 1234  * Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1235 1235  
1236 1236  (% style="display:none" %) (%%)
... ... @@ -1245,9 +1245,8 @@
1245 1245  * ACK_Timout_1: Unit: min
1246 1246  * ACK_Timout_2: Unit: min
1247 1247  
1248 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1249 -|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1250 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1221 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
1222 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
1251 1251  |(% style="width:160px" %)(((
1252 1252  AT+DDETECT=1,1440,2880
1253 1253  
... ... @@ -1283,6 +1283,7 @@
1283 1283  If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1284 1284  
1285 1285  * **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1258 +
1286 1286  ** 0x01 : Flag
1287 1287  ** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1288 1288  ** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
... ... @@ -1295,13 +1295,12 @@
1295 1295  
1296 1296  (% style="color:blue" %)**AT Command: AT+PNACKMD**
1297 1297  
1298 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1299 -|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1300 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1301 -|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1271 +(% border="1" style="background-color:#f2f2f2; width:536.222px" %)
1272 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:263px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:109px" %)**Response**
1273 +|(% style="width:160px" %)AT+PNACKMD=1|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1302 1302  OK
1303 1303  )))
1304 -|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1276 +|(% style="width:160px" %)AT+PNACKMD=0|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1305 1305  0
1306 1306  OK
1307 1307  )))
... ... @@ -1313,9 +1313,8 @@
1313 1313  
1314 1314  (% style="color:blue" %)**AT Command: AT+RJTDC**
1315 1315  
1316 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1317 -|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1318 -|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1288 +(% border="1" style="background-color:#f2f2f2; width:727.222px" %)
1289 +|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:329px" %)**Response**
1319 1319  |(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1320 1320  OK
1321 1321  
... ... @@ -1331,9 +1331,10 @@
1331 1331  
1332 1332  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1333 1333  
1334 -* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1335 -* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1305 +* **Example 1:** Downlink Payload: 26000A  ~/~/  Set AT+RJTDC=10
1336 1336  
1307 +* **Example 2: **Downlink Payload: 260002  ~/~/  Set AT+RJTDC=2
1308 +
1337 1337  (% style="display:none" %) (%%)
1338 1338  
1339 1339  = 8. AT Commands Combination =
... ... @@ -1341,9 +1341,9 @@
1341 1341  == 8.1 Set a fix RX2DR for downlink window ==
1342 1342  
1343 1343  
1344 -* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1316 +* (% style="color:blue" %)**AT+ADR=0             **(%%) **~/~/**  Disable ADR first
1345 1345  
1346 -* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1318 +* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~/~/**  Set xxxx to your wanted DataRate
1347 1347  
1348 1348  (% style="display:none" %) (%%)
1349 1349  

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0