Last modified by kai on 2024/09/06 10:00
<
From version < 60.9 >
edited by Xiaoling
on 2023/03/27 14:07
To version < 52.4 >
edited by Xiaoling
on 2022/08/12 15:58
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -9,25 +9,27 @@
9 9  
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 -* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 -* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
12 +* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
13 +* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 15  (((
16 16  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17 +
18 +
19 +
17 17  )))
18 18  
19 -
20 20  = 2. How to use AT Commands or Downlink command =
21 21  
22 22  
23 -* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 -* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
25 +* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
26 +* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
25 25  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
28 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
27 27  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
28 28  
29 -(% style="display:none" %) (%%)
30 30  
32 +
31 31  = 3. Support End Node and firmware version =
32 32  
33 33  
... ... @@ -102,10 +102,12 @@
102 102  )))
103 103  )))
104 104  
105 -(% style="display:none" %) (%%)
106 106  
108 +
109 +
107 107  = 4. System Management Commands =
108 108  
112 +
109 109  == 4.1 Change Uplink Interval ==
110 110  
111 111  
... ... @@ -135,14 +135,16 @@
135 135  )))
136 136  
137 137  (((
138 -If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
142 +If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
139 139  )))
140 140  
141 141  * **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
142 142  * **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
143 143  
144 -(% style="display:none" %) (%%)
145 145  
149 +
150 +
151 +
146 146  == 4.2 Reboot End Node ==
147 147  
148 148  
... ... @@ -175,10 +175,12 @@
175 175  )))
176 176  
177 177  (((
178 -If the downlink payload=**04FF**, the end node will reboot.
179 -)))
184 +If the downlink payload=**04FF**, the end node will reboot.
180 180  
181 181  
187 +
188 +)))
189 +
182 182  == 4.3 Reset to factory Default ==
183 183  
184 184  
... ... @@ -215,6 +215,7 @@
215 215  )))
216 216  
217 217  
226 +
218 218  == 4.4 Show Firmware Version ==
219 219  
220 220  
... ... @@ -245,6 +245,7 @@
245 245  (((
246 246  
247 247  
257 +
248 248  **xx: Software Type:**
249 249  )))
250 250  
... ... @@ -278,6 +278,7 @@
278 278  firmware version: v1.1.0 ~-~-> 110
279 279  
280 280  
291 +
281 281  == 4.5 Show System Configure ==
282 282  
283 283  
... ... @@ -303,8 +303,12 @@
303 303  OK
304 304  )))
305 305  
317 +
318 +
319 +
306 306  = 5. Keys, IDs and EUIs management =
307 307  
322 +
308 308  == 5.1 Application EUI ==
309 309  
310 310  
... ... @@ -321,8 +321,9 @@
321 321  )))
322 322  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
323 323  
324 -(% style="display:none" %) (%%)
325 325  
340 +
341 +
326 326  == 5.2 Application Key ==
327 327  
328 328  
... ... @@ -339,8 +339,9 @@
339 339  )))
340 340  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
341 341  
342 -(% style="display:none" %) (%%)
343 343  
359 +
360 +
344 344  == 5.3 Application Session Key ==
345 345  
346 346  
... ... @@ -359,8 +359,9 @@
359 359  OK
360 360  )))
361 361  
362 -(% style="display:none" %) (%%)
363 363  
380 +
381 +
364 364  == 5.4 Device Address ==
365 365  
366 366  
... ... @@ -379,8 +379,9 @@
379 379  )))
380 380  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
381 381  
382 -(% style="display:none" %) (%%)
383 383  
401 +
402 +
384 384  == 5.5 Device EUI ==
385 385  
386 386  
... ... @@ -399,8 +399,6 @@
399 399  OK
400 400  )))
401 401  
402 -(% style="display:none" %) (%%)
403 -
404 404  == 5.6 Network ID ==
405 405  
406 406  
... ... @@ -417,8 +417,6 @@
417 417  )))
418 418  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
419 419  
420 -(% style="display:none" %) (%%)
421 -
422 422  == 5.7 Network Session Key ==
423 423  
424 424  
... ... @@ -435,12 +435,12 @@
435 435  )))
436 436  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
437 437  
438 -(% style="display:none" %) (%%)
439 -
440 440  = 6. Joining and sending date on LoRaWAN network =
441 441  
455 +
442 442  == 6.1 Confirm Mode ==
443 443  
458 +
444 444  === 6.1.1  AT+CFM command before DR-LWS007 software stack ===
445 445  
446 446  
... ... @@ -467,7 +467,6 @@
467 467  * **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
468 468  * **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
469 469  
470 -(% style="display:none" %) (%%)
471 471  
472 472  === 6.1.2  AT+CFM command since DR-LWS007 software stack ===
473 473  
... ... @@ -514,7 +514,6 @@
514 514  * **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
515 515  * **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
516 516  
517 -(% style="display:none" %) (%%)
518 518  
519 519  == 6.2 Confirm Status ==
520 520  
... ... @@ -524,10 +524,10 @@
524 524  
525 525  (% style="color:blue" %)**AT Command: AT+CFS**
526 526  
527 -(% border="1" style="background-color:#ffffcc; color:green; width:463px" %)
528 -|=(% colspan="3" style="width: 460px;" %)AT+CFS
529 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:107px" %)**Response**
530 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
540 +(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
541 +|=(% colspan="3" style="width: 531px;" %)AT+CFS
542 +|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
543 +|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
531 531  OK
532 532  )))
533 533  
... ... @@ -574,7 +574,6 @@
574 574  * **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
575 575  * **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
576 576  
577 -(% style="display:none" %) (%%)
578 578  
579 579  == 6.5 LoRa® Network Join Status ==
580 580  
... ... @@ -591,8 +591,6 @@
591 591  OK
592 592  )))
593 593  
594 -(% style="display:none" %) (%%)
595 -
596 596  == 6.6 Print Last Received Data in Raw Format ==
597 597  
598 598  
... ... @@ -608,8 +608,6 @@
608 608  OK
609 609  )))
610 610  
611 -(% style="display:none" %) (%%)
612 -
613 613  == 6.7 Print Last Received Data in Binary Format ==
614 614  
615 615  
... ... @@ -625,8 +625,6 @@
625 625  OK
626 626  )))
627 627  
628 -(% style="display:none" %) (%%)
629 -
630 630  == 6.8 Send Text Data ==
631 631  
632 632  
... ... @@ -640,11 +640,12 @@
640 640  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
641 641  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
642 642  While Error in format, return
649 +
643 643  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
651 +
652 +
644 644  )))
645 645  
646 -(% style="display:none" %) (%%)
647 -
648 648  == 6.9 Send Hexadecimal Data ==
649 649  
650 650  
... ... @@ -653,18 +653,19 @@
653 653  
654 654  (% style="color:blue" %)**AT Command: AT+SENDB**
655 655  
656 -(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
657 -|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
658 -|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
659 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
660 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
661 -AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
663 +(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
664 +|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
665 +|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
666 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
667 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
668 +AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
669 +
670 +
662 662  )))
663 663  
664 -(% style="display:none" %) (%%)
665 -
666 666  = 7. LoRaWAN network management =
667 667  
675 +
668 668  == 7.1 Adaptive Data Rate ==
669 669  
670 670  
... ... @@ -691,8 +691,6 @@
691 691  * **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
692 692  * **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
693 693  
694 -(% style="display:none" %) (%%)
695 -
696 696  == 7.2 LoRa® Class ==
697 697  
698 698  
... ... @@ -699,7 +699,7 @@
699 699  Feature: Get or Set the Device Class(Currently only support class A, class C).
700 700  
701 701  
702 -(% style="color:blue" %)**AT Command:  AT+CLASS**
708 +(% style="color:blue" %)**AT Command:AT+CLASS**
703 703  
704 704  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
705 705  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
... ... @@ -711,15 +711,13 @@
711 711  
712 712  )))
713 713  
714 -(% style="display:none" %) (%%)
715 -
716 716  == 7.3 Duty Cycle Setting ==
717 717  
718 718  
719 -Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
723 +Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
720 720  
721 721  
722 -(% style="color:blue" %)**AT Command:  AT+DCS**
726 +(% style="color:blue" %)**AT Command:AT+DCS**
723 723  
724 724  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
725 725  |=(% colspan="3" style="width: 512px;" %)AT+DCS
... ... @@ -731,19 +731,12 @@
731 731  
732 732  )))
733 733  
734 -(% style="display:none" %) (%%)
735 -
736 736  == 7.4 Data Rate ==
737 737  
738 738  
739 -Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
741 +Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
740 740  
741 -(% style="color:red" %)
742 -**Notice:**
743 743  
744 -* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
745 -* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
746 -
747 747  (% style="color:blue" %)**AT Command: AT+DR**
748 748  
749 749  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
... ... @@ -763,8 +763,6 @@
763 763  * **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
764 764  * **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
765 765  
766 -(% style="display:none" %) (%%)
767 -
768 768  == 7.5 Frame Counter Downlink ==
769 769  
770 770  
... ... @@ -771,7 +771,7 @@
771 771  Feature: Get or Set the Frame Counter Downlink.
772 772  
773 773  
774 -(% style="color:blue" %)**AT Command:  AT+FCD**
769 +(% style="color:blue" %)**AT Command:AT+FCD**
775 775  
776 776  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
777 777  |=(% colspan="3" style="width: 690px;" %)AT+FCD
... ... @@ -788,7 +788,7 @@
788 788  Feature: Get or Set the Frame Counter Uplink.
789 789  
790 790  
791 -(% style="color:blue" %)**AT Command:  AT+FCU**
786 +(% style="color:blue" %)**AT Command:AT+FCU**
792 792  
793 793  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
794 794  |=(% colspan="3" style="width: 531px;" %)AT+FCU
... ... @@ -800,8 +800,6 @@
800 800  
801 801  )))
802 802  
803 -(% style="display:none" %) (%%)
804 -
805 805  == 7.7 Join Accept Delay1 ==
806 806  
807 807  
... ... @@ -808,7 +808,7 @@
808 808  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
809 809  
810 810  
811 -(% style="color:blue" %)**AT Command:  AT+JN1DL**
804 +(% style="color:blue" %)**AT Command:AT+JN1DL**
812 812  
813 813  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
814 814  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
... ... @@ -820,15 +820,12 @@
820 820  
821 821  )))
822 822  
823 -(% style="display:none" %) (%%)
824 -
825 825  == 7.8 Join Accept Delay2 ==
826 826  
827 -
828 828  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
829 829  
830 830  
831 -(% style="color:blue" %)**AT Command:  AT+JN2DL**
821 +(% style="color:blue" %)**AT Command:AT+JN2DL**
832 832  
833 833  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
834 834  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
... ... @@ -840,8 +840,6 @@
840 840  
841 841  )))
842 842  
843 -(% style="display:none" %) (%%)
844 -
845 845  == 7.9 Public Network Mode ==
846 846  
847 847  
... ... @@ -850,7 +850,7 @@
850 850  (% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
851 851  
852 852  
853 -(% style="color:blue" %)**AT Command:  AT+PNM**
841 +(% style="color:blue" %)**AT Command:AT+PNM**
854 854  
855 855  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
856 856  |=(% colspan="3" style="width: 664px;" %)AT+PNM
... ... @@ -869,8 +869,6 @@
869 869  )))
870 870  |(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
871 871  
872 -(% style="display:none" %) (%%)
873 -
874 874  == 7.10 Receive Delay1 ==
875 875  
876 876  
... ... @@ -877,7 +877,7 @@
877 877  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
878 878  
879 879  
880 -(% style="color:blue" %)**AT Command: AT+RX1DL**
866 +(% style="color:blue" %)**AT Command:AT+RX1DL**
881 881  
882 882  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
883 883  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
... ... @@ -889,8 +889,6 @@
889 889  
890 890  )))
891 891  
892 -(% style="display:none" %) (%%)
893 -
894 894  == 7.11 Receive Delay2 ==
895 895  
896 896  
... ... @@ -897,7 +897,7 @@
897 897  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
898 898  
899 899  
900 -(% style="color:blue" %)**AT Command: AT+RX2DL**
884 +(% style="color:blue" %)**AT Command:AT+RX2DL**
901 901  
902 902  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
903 903  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
... ... @@ -909,8 +909,6 @@
909 909  
910 910  )))
911 911  
912 -(% style="display:none" %) (%%)
913 -
914 914  == 7.12 Rx2 Window Data Rate ==
915 915  
916 916  
... ... @@ -917,7 +917,7 @@
917 917  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
918 918  
919 919  
920 -(% style="color:blue" %)**AT Command:  AT+RX2DR**
902 +(% style="color:blue" %)**AT Command:AT+RX2DR**
921 921  
922 922  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
923 923  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
... ... @@ -929,8 +929,6 @@
929 929  
930 930  )))
931 931  
932 -(% style="display:none" %) (%%)
933 -
934 934  == 7.13 Rx2 Window Frequency ==
935 935  
936 936  
... ... @@ -937,7 +937,7 @@
937 937  Feature: Get or Set the Rx2 window frequency
938 938  
939 939  
940 -(% style="color:blue" %)**AT Command:  AT+RX2FQ**
920 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
941 941  
942 942  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
943 943  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
... ... @@ -949,17 +949,15 @@
949 949  
950 950  )))
951 951  
952 -(% style="display:none" %) (%%)
953 -
954 954  == 7.14 Transmit Power ==
955 955  
956 956  
957 957  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
958 958  
959 -(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
937 +Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor
960 960  
961 961  
962 -(% style="color:blue" %)**AT Command:  AT+TXP**
940 +(% style="color:blue" %)**AT Command:AT+TXP**
963 963  
964 964  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
965 965  |=(% colspan="3" style="width: 462px;" %)AT+TXP
... ... @@ -978,7 +978,6 @@
978 978  * **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
979 979  * **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+TXP=0.
980 980  
981 -(% style="display:none" %) (%%)
982 982  
983 983  == 7.15 RSSI of the Last Received Packet ==
984 984  
... ... @@ -995,8 +995,6 @@
995 995  OK
996 996  )))
997 997  
998 -(% style="display:none" %) (%%)
999 -
1000 1000  == 7.16 SNR of the Last Received Packet ==
1001 1001  
1002 1002  
... ... @@ -1003,7 +1003,7 @@
1003 1003  Feature: Get the SNR of the last received packet
1004 1004  
1005 1005  
1006 -(% style="color:blue" %)**AT Command:  AT+SNR**
981 +(% style="color:blue" %)**AT Command:AT+SNR**
1007 1007  
1008 1008  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
1009 1009  |=(% colspan="3" style="width: 568px;" %)AT+SNR
... ... @@ -1012,8 +1012,6 @@
1012 1012  OK
1013 1013  )))
1014 1014  
1015 -(% style="display:none" %) (%%)
1016 -
1017 1017  == 7.17 Application Port ==
1018 1018  
1019 1019  
... ... @@ -1039,7 +1039,6 @@
1039 1039  * **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1040 1040  * **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1041 1041  
1042 -(% style="display:none" %) (%%)
1043 1043  
1044 1044  == 7.18 Single Channel Mode ==
1045 1045  
... ... @@ -1057,8 +1057,6 @@
1057 1057  )))
1058 1058  |(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
1059 1059  
1060 -(% style="display:none" %) (%%)
1061 -
1062 1062  == 7.19 Eight Channel Mode ==
1063 1063  
1064 1064  
... ... @@ -1077,7 +1077,7 @@
1077 1077  )))
1078 1078  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1079 1079  
1080 -(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
1050 +(% style="color:blue" %)**Downlink Command: 0x24**
1081 1081  
1082 1082  Format: Command Code (0x24) followed by 1 bytes channel value.
1083 1083  
... ... @@ -1086,7 +1086,6 @@
1086 1086  * **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1087 1087  * **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1088 1088  
1089 -(% style="display:none" %) (%%)
1090 1090  
1091 1091  == 7.20 Get or Set RXwindows1 timeout ==
1092 1092  
... ... @@ -1104,19 +1104,23 @@
1104 1104  )))
1105 1105  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1106 1106  
1107 -(% style="display:none" %) (%%)
1108 -
1109 1109  (((
1110 -(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1077 +
1078 +
1079 +**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1080 +
1081 +
1111 1111  )))
1112 1112  
1113 1113  [[image:image-20220526162535-1.png]]
1114 1114  
1086 +
1115 1115  (((
1116 1116  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1089 +
1090 +
1117 1117  )))
1118 1118  
1119 -
1120 1120  == 7.21 Get or Set RXwindows2 timeout ==
1121 1121  
1122 1122  
... ... @@ -1133,8 +1133,6 @@
1133 1133  )))
1134 1134  |(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1135 1135  
1136 -(% style="display:none" %) (%%)
1137 -
1138 1138  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1139 1139  
1140 1140  
... ... @@ -1160,7 +1160,6 @@
1160 1160  * **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1161 1161  * **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1162 1162  
1163 -(% style="display:none" %) (%%)
1164 1164  
1165 1165  == 7.23 Set Packet Receiving Response Level ==
1166 1166  
... ... @@ -1201,7 +1201,6 @@
1201 1201  * **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1202 1202  * **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1203 1203  
1204 -(% style="display:none" %) (%%)
1205 1205  
1206 1206  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1207 1207  
... ... @@ -1233,7 +1233,6 @@
1233 1233  * Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1234 1234  * Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1235 1235  
1236 -(% style="display:none" %) (%%)
1237 1237  
1238 1238  == 7.25 Device offline rejoining （LWS007) ==
1239 1239  
... ... @@ -1240,11 +1240,6 @@
1240 1240  
1241 1241  (% style="color:blue" %)**AT Command: AT+DDETECT**
1242 1242  
1243 -AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
1244 -
1245 -* ACK_Timout_1: Unit: min
1246 -* ACK_Timout_2: Unit: min
1247 -
1248 1248  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1249 1249  |=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1250 1250  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -1276,19 +1276,14 @@
1276 1276  OK
1277 1277  )))
1278 1278  
1279 -(% style="color:blue" %)**Downlink Command: 0x32**
1242 +(% style="color:blue" %)**Downlink Command: 0x33**
1280 1280  
1281 1281  Format: Command Code (0x32) followed by 2 bytes mode value.
1282 1282  
1283 -If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1246 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1284 1284  
1285 -* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1286 -** 0x01 : Flag
1287 -** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1288 -** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
1289 -** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1248 +* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1290 1290  
1291 -(% style="display:none" %) (%%)
1292 1292  
1293 1293  == 7.26 Request the server to send an ACK ==
1294 1294  
... ... @@ -1303,11 +1303,10 @@
1303 1303  )))
1304 1304  |(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1305 1305  0
1264 +
1306 1306  OK
1307 1307  )))
1308 1308  
1309 -(% style="display:none" %) (%%)
1310 -
1311 1311  == 7.27 Adjust network rejoining interval ==
1312 1312  
1313 1313  
... ... @@ -1316,13 +1316,13 @@
1316 1316  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1317 1317  |=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1318 1318  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1319 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1276 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1320 1320  OK
1321 1321  
1322 -the interval is 30 min
1279 +the interval is 30000ms = 30s
1323 1323  )))
1324 -|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1325 -Set the ReJoin data transmission interval to 60 min
1281 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1282 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1326 1326  )))
1327 1327  
1328 1328  (% style="color:blue" %)**Downlink Command: 0x26**
... ... @@ -1334,19 +1334,17 @@
1334 1334  * **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1335 1335  * **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1336 1336  
1337 -(% style="display:none" %) (%%)
1338 1338  
1339 1339  = 8. AT Commands Combination =
1340 1340  
1297 +
1341 1341  == 8.1 Set a fix RX2DR for downlink window ==
1342 1342  
1343 1343  
1344 -* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1301 +* **AT+ADR=0             ** **~-~->**  Disable ADR first
1302 +* **AT+RX2DR=xxxx**  **~-~->**  Set xxxx to your wanted DataRate
1345 1345  
1346 -* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1347 1347  
1348 -(% style="display:none" %) (%%)
1349 -
1350 1350  == 8.2 Use Downlink Command to set a fix uplink DR ==
1351 1351  
1352 1352  
... ... @@ -1355,9 +1355,7 @@
1355 1355  **Same as:**
1356 1356  
1357 1357  * AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1358 -
1359 1359  * AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1360 -
1361 1361  * AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1362 1362  
1363 1363  

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0