Last modified by kai on 2024/09/06 10:00
<
From version < 60.5 >
edited by Xiaoling
on 2023/03/27 14:01
To version < 50.5 >
edited by Xiaoling
on 2022/07/13 12:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -9,25 +9,25 @@
9 9  
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 -* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 -* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
12 +* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
13 +* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 15  (((
16 16  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17 +
17 17  )))
18 18  
19 -
20 20  = 2. How to use AT Commands or Downlink command =
21 21  
22 22  
23 -* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 -* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
23 +* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 +* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
25 25  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
27 27  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
28 28  
29 -(% style="display:none" %) (%%)
30 30  
30 +
31 31  = 3. Support End Node and firmware version =
32 32  
33 33  
... ... @@ -102,16 +102,16 @@
102 102  )))
103 103  )))
104 104  
105 -(% style="display:none" %) (%%)
106 106  
106 +
107 107  = 4. System Management Commands =
108 108  
109 +
109 109  == 4.1 Change Uplink Interval ==
110 110  
111 111  
112 112  Feature: Change LoRaWAN End Node Transmit Interval.
113 113  
114 -
115 115  (% style="color:blue" %)**AT Command: AT+TDC**
116 116  
117 117  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
... ... @@ -135,14 +135,14 @@
135 135  )))
136 136  
137 137  (((
138 -If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
138 +If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
139 139  )))
140 140  
141 -* **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
142 -* **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
141 +* **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
142 +* **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
143 143  
144 -(% style="display:none" %) (%%)
145 145  
145 +
146 146  == 4.2 Reboot End Node ==
147 147  
148 148  
... ... @@ -151,10 +151,11 @@
151 151  
152 152  (% style="color:blue" %)**AT Command: ATZ**
153 153  
154 -(% border="1" style="background-color:#ffffcc; color:green; width:546px" %)
155 -|=(% colspan="3" style="width: 543px;" %)ATZ: Trig a reset of the MCU
156 -|(% style="width:157px" %)**Command Example**|(% style="width:92px" %)**Function**|(% style="width:294px" %)**Response**
157 -|(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
154 +
155 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
156 +|=(% colspan="3" %)ATZ: Trig a reset of the MCU
157 +|**Command Example**|**Function**|**Response**
158 +|ATZ|Reset MCU|(((
158 158  Device reset and show booting info
159 159  
160 160  LSN50 Device/LoRa ST Module
... ... @@ -168,29 +168,31 @@
168 168  <followed by the Tx and Rx information>
169 169  )))
170 170  
172 +
171 171  (% style="color:blue" %)**Downlink Command: 0x04**
172 172  
175 +
173 173  (((
174 174  Format: Command Code (0x04) followed by FF.
175 175  )))
176 176  
177 177  (((
178 -If the downlink payload=**04FF**, the end node will reboot.
181 +If the downlink payload=**04FF**, the end node will reboot.
182 +
183 +
179 179  )))
180 180  
181 -
182 182  == 4.3 Reset to factory Default ==
183 183  
184 184  
185 185  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
186 186  
187 -
188 188  (% style="color:blue" %)**AT Command: AT+FDR**
189 189  
190 -(% border="1" style="background-color:#ffffcc; color:green; width:789px" %)
191 -|=(% colspan="3" style="width: 786px;" %)Reset to factory default
192 -|(% style="width:154px" %)**Command Example**|(% style="width:175px" %)**Function**|(% style="width:456px" %)**Response**
193 -|(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
193 +(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
194 +|=(% colspan="3" style="width: 828px;" %)Reset to factory default
195 +|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
196 +|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
194 194  Device reset to factory default parameters and show booting info
195 195  
196 196  LSN50 Device/LoRa ST Module
... ... @@ -204,8 +204,10 @@
204 204  Please set the parameters or reset Device to apply change
205 205  )))
206 206  
210 +
207 207  (% style="color:blue" %)**Downlink Command: 0x04**
208 208  
213 +
209 209  (((
210 210  Format: Command Code (0x04) followed by FE.
211 211  )))
... ... @@ -217,23 +217,25 @@
217 217  
218 218  == 4.4 Show Firmware Version ==
219 219  
220 -
221 221  Feature: Show firmware version. No downlink command yet.
222 222  
223 223  
224 224  (% style="color:blue" %)**AT Command: AT+VER**
225 225  
226 -(% border="1" style="background-color:#ffffcc; color:green; width:542px" %)
227 -|=(% colspan="3" style="width: 539px;" %)AT+VER: Image Version and Frequency Band
228 -|(% style="width:157px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:86px" %)**Response**
229 -|(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
230 +
231 +(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
232 +|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
233 +|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
234 +|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
230 230  1.3 EU868
231 231  
232 232  OK
233 233  )))
234 234  
240 +
235 235  (% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
236 236  
243 +
237 237  (((
238 238  Downlink Format: 0x26
239 239  )))
... ... @@ -243,8 +243,6 @@
243 243  )))
244 244  
245 245  (((
246 -
247 -
248 248  **xx: Software Type:**
249 249  )))
250 250  
... ... @@ -253,8 +253,6 @@
253 253  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
254 254  
255 255  (((
256 -
257 -
258 258  **yy: Frequency Band:**
259 259  )))
260 260  
... ... @@ -270,8 +270,6 @@
270 270  * 0xa0: AS923-3
271 271  
272 272  (((
273 -
274 -
275 275  **zz: Subband**
276 276  )))
277 277  
... ... @@ -280,12 +280,12 @@
280 280  
281 281  == 4.5 Show System Configure ==
282 282  
283 -
284 284  Feature: Show All configure. No downlink command yet.
285 285  
286 286  
287 287  (% style="color:blue" %)**AT Command: AT+CFG**
288 288  
289 +
289 289  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
290 290  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
291 291  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -307,12 +307,12 @@
307 307  
308 308  == 5.1 Application EUI ==
309 309  
310 -
311 311  Feature: Get or Set the Application EUI.
312 312  
313 313  
314 314  (% style="color:blue" %)**AT Command: AT+APPEUI**
315 315  
316 +
316 316  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
317 317  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
318 318  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -321,16 +321,14 @@
321 321  )))
322 322  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
323 323  
324 -(% style="display:none" %) (%%)
325 -
326 326  == 5.2 Application Key ==
327 327  
328 -
329 329  Feature: Get or Set the Application Key.
330 330  
331 331  
332 332  (% style="color:blue" %)**AT Command: AT+APPKEY**
333 333  
332 +
334 334  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
335 335  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
336 336  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -339,16 +339,14 @@
339 339  )))
340 340  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
341 341  
342 -(% style="display:none" %) (%%)
343 -
344 344  == 5.3 Application Session Key ==
345 345  
346 -
347 347  Feature: Get or Set the Application Session Key.
348 348  
349 349  
350 350  (% style="color:blue" %)**AT Command: AT+APPSKEY**
351 351  
348 +
352 352  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
353 353  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
354 354  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -359,16 +359,14 @@
359 359  OK
360 360  )))
361 361  
362 -(% style="display:none" %) (%%)
363 -
364 364  == 5.4 Device Address ==
365 365  
366 -
367 367  Feature: Get or Set the Device Address.
368 368  
369 369  
370 370  (% style="color:blue" %)**AT Command: AT+DADDR**
371 371  
366 +
372 372  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
373 373  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
374 374  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -379,16 +379,14 @@
379 379  )))
380 380  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
381 381  
382 -(% style="display:none" %) (%%)
383 -
384 384  == 5.5 Device EUI ==
385 385  
386 -
387 387  Feature: Get or Set the Device EUI.
388 388  
389 389  
390 390  (% style="color:blue" %)**AT Command: AT+DEUI**
391 391  
384 +
392 392  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
393 393  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
394 394  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -399,16 +399,14 @@
399 399  OK
400 400  )))
401 401  
402 -(% style="display:none" %) (%%)
403 -
404 404  == 5.6 Network ID ==
405 405  
406 -
407 407  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
408 408  
409 409  
410 410  (% style="color:blue" %)**AT Command: AT+NWKID**
411 411  
402 +
412 412  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
413 413  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
414 414  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -417,16 +417,14 @@
417 417  )))
418 418  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
419 419  
420 -(% style="display:none" %) (%%)
421 -
422 422  == 5.7 Network Session Key ==
423 423  
424 -
425 425  Feature: Get or Set the Network Session Key
426 426  
427 427  
428 428  (% style="color:blue" %)**AT Command: AT+NWKSKEY**
429 429  
418 +
430 430  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
431 431  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
432 432  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -435,20 +435,18 @@
435 435  )))
436 436  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
437 437  
438 -(% style="display:none" %) (%%)
439 -
440 440  = 6. Joining and sending date on LoRaWAN network =
441 441  
442 442  == 6.1 Confirm Mode ==
443 443  
444 -=== 6.1.1  AT+CFM command before DR-LWS007 software stack ===
431 +=== AT+CFM command before DR-LWS007 software stack ===
445 445  
446 -
447 447  Feature: Get or Set the confirmation mode (0-1).
448 448  
449 449  
450 450  (% style="color:blue" %)**AT Command: AT+CFM**
451 451  
438 +
452 452  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
453 453  |=(% colspan="3" style="width: 707px;" %)AT+CFM
454 454  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -464,16 +464,15 @@
464 464  
465 465  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
466 466  
467 -* **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
468 -* **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
454 +* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
455 +* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
469 469  
470 -(% style="display:none" %) (%%)
457 +=== AT+CFM command since DR-LWS007 software stack ===
471 471  
472 -=== 6.1.2  AT+CFM command since DR-LWS007 software stack ===
473 473  
474 -
475 475  (% style="color:blue" %)**AT Command: AT+CFM**
476 476  
462 +
477 477  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
478 478  |=(% colspan="3" style="width: 707px;" %)AT+CFM
479 479  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -505,40 +505,40 @@
505 505  OK
506 506  )))
507 507  
494 +
508 508  (% style="color:blue" %)**Downlink Command: 0x05**
509 509  
497 +
510 510  Format: Command Code (0x05) followed by 2 bytes mode value.
511 511  
512 512  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
513 513  
514 -* **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
515 -* **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
502 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
503 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
516 516  
517 -(% style="display:none" %) (%%)
518 -
519 519  == 6.2 Confirm Status ==
520 520  
521 -
522 522  Feature: Get confirmation status of the last AT+SEND (0-1).
523 523  
524 524  
525 525  (% style="color:blue" %)**AT Command: AT+CFS**
526 526  
527 -(% border="1" style="background-color:#ffffcc; color:green; width:463px" %)
528 -|=(% colspan="3" style="width: 460px;" %)AT+CFS
529 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:107px" %)**Response**
530 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
512 +
513 +(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
514 +|=(% colspan="3" style="width: 531px;" %)AT+CFS
515 +|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
516 +|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
531 531  OK
532 532  )))
533 533  
534 534  == 6.3 Join LoRa® Network ==
535 535  
536 -
537 537  Feature: Join network.
538 538  
539 539  
540 540  (% style="color:blue" %)**AT Command: AT+JOIN**
541 541  
527 +
542 542  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
543 543  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
544 544  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -550,12 +550,12 @@
550 550  
551 551  == 6.4 LoRa® Network Join Mode ==
552 552  
553 -
554 554  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
555 555  
556 556  
557 557  (% style="color:blue" %)**AT Command: AT+NJM**
558 558  
544 +
559 559  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
560 560  |=(% colspan="3" style="width: 750px;" %)AT+NJM
561 561  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -565,25 +565,25 @@
565 565  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
566 566  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
567 567  
554 +
568 568  (% style="color:blue" %)**Downlink Command: 0x20**
569 569  
557 +
570 570  Format: Command Code (0x20) followed by 1 bytes mode value.
571 571  
572 572  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
573 573  
574 -* **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
575 -* **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
562 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
563 +* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
576 576  
577 -(% style="display:none" %) (%%)
578 -
579 579  == 6.5 LoRa® Network Join Status ==
580 580  
581 -
582 582  Feature: LoRa® Network Join Status.
583 583  
584 584  
585 585  (% style="color:blue" %)**AT Command: AT+NJS**
586 586  
572 +
587 587  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
588 588  |=(% colspan="3" style="width: 495px;" %)AT+NJS
589 589  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -591,16 +591,14 @@
591 591  OK
592 592  )))
593 593  
594 -(% style="display:none" %) (%%)
595 -
596 596  == 6.6 Print Last Received Data in Raw Format ==
597 597  
598 -
599 599  Feature: Print Last Received Data in Raw Format<port:data>.
600 600  
601 601  
602 602  (% style="color:blue" %)**AT Command: AT+RECV**
603 603  
587 +
604 604  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
605 605  |=(% colspan="3" style="width: 584px;" %)AT+RECV
606 606  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -608,16 +608,14 @@
608 608  OK
609 609  )))
610 610  
611 -(% style="display:none" %) (%%)
612 -
613 613  == 6.7 Print Last Received Data in Binary Format ==
614 614  
615 -
616 616  Feature: Print Last Received Data in Binary Format<port:data>.
617 617  
618 618  
619 619  (% style="color:blue" %)**AT Command: AT+RECVB**
620 620  
602 +
621 621  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
622 622  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
623 623  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -625,54 +625,53 @@
625 625  OK
626 626  )))
627 627  
628 -(% style="display:none" %) (%%)
629 -
630 630  == 6.8 Send Text Data ==
631 631  
632 -
633 633  Feature: Send Text Data<port:data>.
634 634  
635 635  
636 636  (% style="color:blue" %)**AT Command: AT+SEND**
637 637  
617 +
638 638  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
639 639  |=(% colspan="3" style="width: 988px;" %)AT+SEND
640 640  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
641 641  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
642 642  While Error in format, return
623 +
643 643  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
625 +
626 +
644 644  )))
645 645  
646 -(% style="display:none" %) (%%)
647 -
648 648  == 6.9 Send Hexadecimal Data ==
649 649  
650 -
651 651  Feature: Send hexadecimal data along with the application port.
652 652  
653 653  
654 654  (% style="color:blue" %)**AT Command: AT+SENDB**
655 655  
656 -(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
657 -|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
658 -|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
659 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
660 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
661 -AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
662 -)))
663 663  
664 -(% style="display:none" %) (%%)
637 +(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
638 +|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
639 +|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
640 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
641 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
642 +AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
665 665  
644 +
645 +)))
646 +
666 666  = 7. LoRaWAN network management =
667 667  
668 668  == 7.1 Adaptive Data Rate ==
669 669  
670 -
671 671  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
672 672  
673 673  
674 674  (% style="color:blue" %)**AT Command: AT+ADR**
675 675  
656 +
676 676  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
677 677  |=(% colspan="3" style="width: 680px;" %)AT+ADR
678 678  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -684,23 +684,24 @@
684 684  AT_PARAM_ERROR
685 685  )))
686 686  
668 +
687 687  (% style="color:blue" %)**Downlink Command: 0x22**
688 688  
689 -If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
690 690  
691 -* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
692 -* **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
693 693  
694 -(% style="display:none" %) (%%)
673 +If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
695 695  
675 +* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
676 +* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
677 +
696 696  == 7.2 LoRa® Class ==
697 697  
698 -
699 699  Feature: Get or Set the Device Class(Currently only support class A, class C).
700 700  
701 701  
702 -(% style="color:blue" %)**AT Command:  AT+CLASS**
683 +(% style="color:blue" %)**AT Command:AT+CLASS**
703 703  
685 +
704 704  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
705 705  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
706 706  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -708,17 +708,16 @@
708 708  OK
709 709  )))
710 710  |(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((
693 +
711 711  )))
712 712  
713 -(% style="display:none" %) (%%)
714 -
715 715  == 7.3 Duty Cycle Setting ==
716 716  
698 +Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
717 717  
718 -Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
719 719  
701 +(% style="color:blue" %)**AT Command:AT+DCS**
720 720  
721 -(% style="color:blue" %)**AT Command:  AT+DCS**
722 722  
723 723  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
724 724  |=(% colspan="3" style="width: 512px;" %)AT+DCS
... ... @@ -727,23 +727,17 @@
727 727  OK
728 728  )))
729 729  |(% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((
711 +
730 730  )))
731 731  
732 -(% style="display:none" %) (%%)
733 -
734 734  == 7.4 Data Rate ==
735 735  
716 +Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
736 736  
737 -Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
738 738  
739 -(% style="color:red" %)
740 -**Notice:**
741 -
742 -* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
743 -* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
744 -
745 745  (% style="color:blue" %)**AT Command: AT+DR**
746 746  
721 +
747 747  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
748 748  |=(% colspan="3" style="width: 463px;" %)AT+DR
749 749  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -754,23 +754,24 @@
754 754  
755 755  )))
756 756  
732 +
757 757  (% style="color:blue" %)**Downlink Command: 0x2200aaFF**
758 758  
759 -If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
760 760  
761 -* **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
762 -* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
763 763  
764 -(% style="display:none" %) (%%)
737 +If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
765 765  
739 +* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
740 +* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
741 +
766 766  == 7.5 Frame Counter Downlink ==
767 767  
768 -
769 769  Feature: Get or Set the Frame Counter Downlink.
770 770  
771 771  
772 -(% style="color:blue" %)**AT Command:  AT+FCD**
747 +(% style="color:blue" %)**AT Command:AT+FCD**
773 773  
749 +
774 774  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
775 775  |=(% colspan="3" style="width: 690px;" %)AT+FCD
776 776  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -779,6 +779,8 @@
779 779  )))
780 780  |(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
781 781  OK
758 +
759 +
782 782  )))
783 783  
784 784  == 7.6 Frame Counter Uplink ==
... ... @@ -786,8 +786,9 @@
786 786  Feature: Get or Set the Frame Counter Uplink.
787 787  
788 788  
789 -(% style="color:blue" %)**AT Command:  AT+FCU**
767 +(% style="color:blue" %)**AT Command:AT+FCU**
790 790  
769 +
791 791  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
792 792  |=(% colspan="3" style="width: 531px;" %)AT+FCU
793 793  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -795,18 +795,17 @@
795 795  OK
796 796  )))
797 797  |(% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((
777 +
798 798  )))
799 799  
800 -(% style="display:none" %) (%%)
801 -
802 802  == 7.7 Join Accept Delay1 ==
803 803  
804 -
805 805  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
806 806  
807 807  
808 -(% style="color:blue" %)**AT Command:  AT+JN1DL**
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
809 809  
787 +
810 810  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
811 811  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
812 812  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -814,18 +814,17 @@
814 814  OK
815 815  )))
816 816  |(% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((
795 +
817 817  )))
818 818  
819 -(% style="display:none" %) (%%)
820 -
821 821  == 7.8 Join Accept Delay2 ==
822 822  
823 -
824 824  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
825 825  
826 826  
827 -(% style="color:blue" %)**AT Command:  AT+JN2DL**
803 +(% style="color:blue" %)**AT Command:AT+JN2DL**
828 828  
805 +
829 829  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
830 830  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
831 831  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -833,20 +833,19 @@
833 833  OK
834 834  )))
835 835  |(% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((
813 +
836 836  )))
837 837  
838 -(% style="display:none" %) (%%)
839 -
840 840  == 7.9 Public Network Mode ==
841 841  
842 -
843 843  Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
844 844  
845 -(% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
820 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
846 846  
847 847  
848 -(% style="color:blue" %)**AT Command:  AT+PNM**
823 +(% style="color:blue" %)**AT Command:AT+PNM**
849 849  
825 +
850 850  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
851 851  |=(% colspan="3" style="width: 664px;" %)AT+PNM
852 852  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -866,12 +866,12 @@
866 866  
867 867  == 7.10 Receive Delay1 ==
868 868  
869 -
870 870  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
871 871  
872 872  
873 -(% style="color:blue" %)**AT Command: AT+RX1DL**
848 +(% style="color:blue" %)**AT Command:AT+RX1DL**
874 874  
850 +
875 875  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
876 876  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
877 877  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -884,12 +884,12 @@
884 884  
885 885  == 7.11 Receive Delay2 ==
886 886  
887 -
888 888  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
889 889  
890 890  
891 -(% style="color:blue" %)**AT Command: AT+RX2DL**
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
892 892  
868 +
893 893  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
894 894  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
895 895  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -902,12 +902,12 @@
902 902  
903 903  == 7.12 Rx2 Window Data Rate ==
904 904  
905 -
906 906  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
907 907  
908 908  
909 -(% style="color:blue" %)**AT Command:  AT+RX2DR**
884 +(% style="color:blue" %)**AT Command:AT+RX2DR**
910 910  
886 +
911 911  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
912 912  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
913 913  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -920,12 +920,12 @@
920 920  
921 921  == 7.13 Rx2 Window Frequency ==
922 922  
923 -
924 924  Feature: Get or Set the Rx2 window frequency
925 925  
926 926  
927 -(% style="color:blue" %)**AT Command:  AT+RX2FQ**
902 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
928 928  
904 +
929 929  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
930 930  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
931 931  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -938,13 +938,11 @@
938 938  
939 939  == 7.14 Transmit Power ==
940 940  
941 -
942 942  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
943 943  
944 -(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
945 945  
920 +(% style="color:blue" %)**AT Command:AT+TXP**
946 946  
947 -(% style="color:blue" %)**AT Command:  AT+TXP**
948 948  
949 949  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
950 950  |=(% colspan="3" style="width: 462px;" %)AT+TXP
... ... @@ -960,17 +960,17 @@
960 960  
961 961  If the downlink payload=22000100, it means setting the TXP to 0.
962 962  
963 -* **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
964 -* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+TXP=0.
937 +* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
938 +* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
965 965  
966 966  == 7.15 RSSI of the Last Received Packet ==
967 967  
968 -
969 969  Feature: Get or Set the Rx2 window frequency
970 970  
971 971  
972 972  (% style="color:blue" %)**AT Command:AT+RSSI**
973 973  
947 +
974 974  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
975 975  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
976 976  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -980,12 +980,12 @@
980 980  
981 981  == 7.16 SNR of the Last Received Packet ==
982 982  
983 -
984 984  Feature: Get the SNR of the last received packet
985 985  
959 +{{info}}
960 +**AT Command:AT+SNR**
961 +{{/info}}
986 986  
987 -(% style="color:blue" %)**AT Command:  AT+SNR**
988 -
989 989  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
990 990  |=(% colspan="3" style="width: 568px;" %)AT+SNR
991 991  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -995,12 +995,12 @@
995 995  
996 996  == 7.17 Application Port ==
997 997  
998 -
999 999  Feature: Get or set the application port.
1000 1000  
974 +{{info}}
975 +**AT Command: AT+PORT**
976 +{{/info}}
1001 1001  
1002 -(% style="color:blue" %)**AT Command: AT+PORT**
1003 -
1004 1004  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
1005 1005  |=(% colspan="3" style="width: 497px;" %)AT+PORT
1006 1006  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
... ... @@ -1009,23 +1009,25 @@
1009 1009  )))
1010 1010  |(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
1011 1011  
1012 -(% style="color:blue" %)**Downlink Command: 0x23**
986 +{{info}}
987 +**Downlink Command: 0x23**
988 +{{/info}}
1013 1013  
1014 1014  Format: Command Code (0x23) followed by 1 bytes port value.
1015 1015  
1016 1016  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
1017 1017  
1018 -* **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1019 -* **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
994 +* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
995 +* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
1020 1020  
1021 1021  == 7.18 Single Channel Mode ==
1022 1022  
1023 -
1024 1024  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
1025 1025  
1001 +{{info}}
1002 +**AT Command: AT+CHS**
1003 +{{/info}}
1026 1026  
1027 -(% style="color:blue" %)**AT Command: AT+CHS**
1028 -
1029 1029  (% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
1030 1030  |=(% colspan="3" style="width: 600px;" %)AT+CHS
1031 1031  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -1036,12 +1036,12 @@
1036 1036  
1037 1037  == 7.19 Eight Channel Mode ==
1038 1038  
1039 -
1040 1040  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1041 1041  
1017 +{{info}}
1018 +**AT Command: AT+CHE**
1019 +{{/info}}
1042 1042  
1043 -(% style="color:blue" %)**AT Command: AT+CHE**
1044 -
1045 1045  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1046 1046  |=(% colspan="3" style="width: 707px;" %)AT+CHE
1047 1047  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -1052,23 +1052,25 @@
1052 1052  )))
1053 1053  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1054 1054  
1055 -(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
1031 +{{info}}
1032 +**Downlink Command: 0x24**
1033 +{{/info}}
1056 1056  
1057 1057  Format: Command Code (0x24) followed by 1 bytes channel value.
1058 1058  
1059 1059  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1060 1060  
1061 -* **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1062 -* **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1039 +* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1040 +* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
1063 1063  
1064 1064  == 7.20 Get or Set RXwindows1 timeout ==
1065 1065  
1044 +Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1066 1066  
1067 -Feature: Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1046 +{{info}}
1047 +**AT Command: AT+RX1WTO**
1048 +{{/info}}
1068 1068  
1069 -
1070 -(% style="color:blue" %)**AT Command: AT+RX1WTO**
1071 -
1072 1072  (% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1073 1073  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1074 1074  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
... ... @@ -1078,17 +1078,11 @@
1078 1078  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1079 1079  
1080 1080  (((
1081 -
1082 -
1083 -
1084 -(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1085 -
1086 -
1059 +**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1087 1087  )))
1088 1088  
1089 1089  [[image:image-20220526162535-1.png]]
1090 1090  
1091 -
1092 1092  (((
1093 1093  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1094 1094  
... ... @@ -1097,12 +1097,12 @@
1097 1097  
1098 1098  == 7.21 Get or Set RXwindows2 timeout ==
1099 1099  
1072 +Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1100 1100  
1101 -Feature: Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1074 +{{info}}
1075 +**AT Command: AT+RX2WTO**
1076 +{{/info}}
1102 1102  
1103 -
1104 -(% style="color:blue" %)**AT Command: AT+RX2WTO**
1105 -
1106 1106  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1107 1107  |=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1108 1108  |(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
... ... @@ -1113,12 +1113,12 @@
1113 1113  
1114 1114  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1115 1115  
1116 -
1117 1117  Feature: Get or Set uplinkdwelltime
1118 1118  
1090 +{{info}}
1091 +**AT Command: AT+DWELLT**
1092 +{{/info}}
1119 1119  
1120 -(% style="color:blue" %)**AT Command: AT+DWELLT**
1121 -
1122 1122  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1123 1123  |=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1124 1124  |(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
... ... @@ -1127,23 +1127,23 @@
1127 1127  )))
1128 1128  |(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
1129 1129  
1130 -(% style="color:blue" %)**Downlink Command: 0x25**
1102 +{{info}}
1103 +**Downlink Command: 0x25**
1104 +{{/info}}
1131 1131  
1132 1132  Format: Command Code (0x25) followed by 1 bytes state value.
1133 1133  
1134 1134  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1135 1135  
1136 -* **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1137 -* **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1110 +* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1111 +* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1138 1138  
1139 1139  == 7.23 Set Packet Receiving Response Level ==
1140 1140  
1141 -
1142 1142  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1143 1143  
1117 +RPL value:
1144 1144  
1145 -**RPL value:**
1146 -
1147 1147  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1148 1148  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1149 1149  * **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
... ... @@ -1150,13 +1150,15 @@
1150 1150  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1151 1151  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1152 1152  
1153 -**Case Analyes:**
1125 +Case Analyes:
1154 1154  
1155 1155  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1156 1156  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1157 1157  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1158 1158  
1159 -(% style="color:blue" %)**AT Command: AT+RPL**
1131 +{{info}}
1132 +**AT Command: AT+RPL**
1133 +{{/info}}
1160 1160  
1161 1161  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1162 1162  |=(% colspan="3" style="width: 533px;" %)AT+RPL
... ... @@ -1166,55 +1166,52 @@
1166 1166  )))
1167 1167  |(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
1168 1168  
1169 -(% style="color:blue" %)**Downlink Command: 0x21**
1143 +{{info}}
1144 +**Downlink Command: 0x21**
1145 +{{/info}}
1170 1170  
1171 1171  Format: Command Code (0x21) followed by 1 bytes level value.
1172 1172  
1173 1173  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1174 1174  
1175 -* **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1176 -* **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1151 +* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1152 +* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1177 1177  
1178 1178  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1179 1179  
1156 +{{info}}
1157 +**AT Command: AT+SETMAXNBTRANS **
1158 +{{/info}}
1180 1180  
1181 -(% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1182 -
1183 -(% border="1" style="background-color:#ffffcc; color:green; width:589px" %)
1184 -|=(% colspan="3" style="width: 586px;" %)AT+**SETMAXNBTRANS**
1185 -|(% style="width:227px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:87px" %)**Response**
1186 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1160 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1161 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1162 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1163 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1187 1187  OK
1188 1188  )))
1189 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1190 -value2: 0: uplink fcnt doesn't change for each NBTrans;
1191 -
1192 -1: uplink fcnt increase by 1 for each NBTrans.
1193 -)))|(% style="width:87px" %)(((
1166 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1194 1194  1
1195 1195  
1196 1196  OK
1197 1197  )))
1198 1198  
1199 -(% style="color:blue" %)**Downlink Command: 0x33**
1172 +{{info}}
1173 +**Downlink Command: 0x33**
1174 +{{/info}}
1200 1200  
1201 1201  Format: Command Code (0x33) followed by 2 bytes mode value.
1202 1202  
1203 1203  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1204 1204  
1205 -* Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1206 -* Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1180 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1181 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1207 1207  
1208 1208  == 7.25 Device offline rejoining （LWS007) ==
1209 1209  
1185 +{{info}}
1186 +**AT Command: AT+DDETECT**
1187 +{{/info}}
1210 1210  
1211 -(% style="color:blue" %)**AT Command: AT+DDETECT**
1212 -
1213 -AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
1214 -
1215 -* ACK_Timout_1: Unit: min
1216 -* ACK_Timout_2: Unit: min
1217 -
1218 1218  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1219 1219  |=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1220 1220  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -1246,23 +1246,22 @@
1246 1246  OK
1247 1247  )))
1248 1248  
1249 -(% style="color:blue" %)**Downlink Command: 0x32**
1220 +{{info}}
1221 +**Downlink Command: 0x33**
1222 +{{/info}}
1250 1250  
1251 1251  Format: Command Code (0x32) followed by 2 bytes mode value.
1252 1252  
1253 -If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1226 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1254 1254  
1255 -* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1256 -** 0x01 : Flag
1257 -** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1258 -** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
1259 -** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1228 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1260 1260  
1261 1261  == 7.26 Request the server to send an ACK ==
1262 1262  
1232 +{{info}}
1233 +**AT Command: AT+PNACKMD**
1234 +{{/info}}
1263 1263  
1264 -(% style="color:blue" %)**AT Command: AT+PNACKMD**
1265 -
1266 1266  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1267 1267  |=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1268 1268  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
... ... @@ -1277,47 +1277,49 @@
1277 1277  
1278 1278  == 7.27 Adjust network rejoining interval ==
1279 1279  
1250 +{{info}}
1251 +**AT Command: AT+RJTDC**
1252 +{{/info}}
1280 1280  
1281 -(% style="color:blue" %)**AT Command: AT+RJTDC**
1282 -
1283 1283  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1284 1284  |=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1285 1285  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1286 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1257 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1287 1287  OK
1288 1288  
1289 -the interval is 30 min
1260 +the interval is 30000ms = 30s
1290 1290  )))
1291 -|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1292 -Set the ReJoin data transmission interval to 60 min
1262 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1293 1293  )))
1294 1294  
1295 -(% style="color:blue" %)**Downlink Command: 0x26**
1266 +{{info}}
1267 +**Downlink Command: 0x26**
1268 +{{/info}}
1296 1296  
1297 1297  Format: Command Code (0x26) followed by 2 bytes mode value.
1298 1298  
1299 1299  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1300 1300  
1301 -* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1302 -* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1274 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1303 1303  
1304 1304  = 8. AT Commands Combination =
1305 1305  
1306 1306  == 8.1 Set a fix RX2DR for downlink window ==
1307 1307  
1281 +* **AT+ADR=0 **~-~-> Disable ADR first
1282 +* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
1308 1308  
1309 -* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1310 -* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1311 -
1312 1312  == 8.2 Use Downlink Command to set a fix uplink DR ==
1313 1313  
1286 +{{info}}
1287 +**Downlink Command: 0x22000500**
1288 +{{/info}}
1314 1314  
1315 -(% style="color:blue" %)**Downlink Command: 0x22000500**
1290 +Same as:
1316 1316  
1317 -**Same as:**
1318 -
1319 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1320 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1321 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1322 -
1323 -
1292 +* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1293 +* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1294 +* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1295 +~)~)~)

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0