Last modified by kai on 2024/09/06 10:00
<
From version < 60.4 >
edited by Xiaoling
on 2023/03/27 13:59
To version < 50.4 >
edited by Xiaoling
on 2022/07/13 11:50
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -9,25 +9,25 @@
9 9  
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 -* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 -* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
12 +* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
13 +* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 15  (((
16 16  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17 +
17 17  )))
18 18  
19 -
20 20  = 2. How to use AT Commands or Downlink command =
21 21  
22 22  
23 -* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 -* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
23 +* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 +* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
25 25  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
27 27  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
28 28  
29 -(% style="display:none" %) (%%)
30 30  
30 +
31 31  = 3. Support End Node and firmware version =
32 32  
33 33  
... ... @@ -102,18 +102,21 @@
102 102  )))
103 103  )))
104 104  
105 -(% style="display:none" %) (%%)
106 106  
106 +
107 107  = 4. System Management Commands =
108 108  
109 +
109 109  == 4.1 Change Uplink Interval ==
110 110  
111 111  
112 112  Feature: Change LoRaWAN End Node Transmit Interval.
113 113  
115 +(% class="box infomessage" %)
116 +(((
117 +**AT Command: AT+TDC**
118 +)))
114 114  
115 -(% style="color:blue" %)**AT Command: AT+TDC**
116 -
117 117  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
118 118  |=(% colspan="3" style="width: 724px;" %)AT+TDC
119 119  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
... ... @@ -126,35 +126,35 @@
126 126  Set transmit interval to 60000ms = 60 seconds
127 127  )))
128 128  
129 -(((
130 -
132 +{{info}}
133 +**Downlink Command: 0x01**
134 +{{/info}}
131 131  
132 -(% style="color:blue" %)**Downlink Command: 0x01**
133 -
136 +(((
134 134  Format: Command Code (0x01) followed by 3 bytes time value.
135 135  )))
136 136  
137 137  (((
138 -If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
141 +If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
139 139  )))
140 140  
141 -* **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
142 -* **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
144 +* **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
145 +* **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
143 143  
144 -(% style="display:none" %) (%%)
145 145  
148 +
146 146  == 4.2 Reboot End Node ==
147 147  
148 -
149 149  Feature: Reboot End Node to perform a new OTAA or ABP Join.
150 150  
153 +{{info}}
154 +**AT Command: ATZ**
155 +{{/info}}
151 151  
152 -(% style="color:blue" %)**AT Command: ATZ**
153 -
154 -(% border="1" style="background-color:#ffffcc; color:green; width:546px" %)
155 -|=(% colspan="3" style="width: 543px;" %)ATZ: Trig a reset of the MCU
156 -|(% style="width:157px" %)**Command Example**|(% style="width:92px" %)**Function**|(% style="width:294px" %)**Response**
157 -|(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
157 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
158 +|=(% colspan="3" %)ATZ: Trig a reset of the MCU
159 +|**Command Example**|**Function**|**Response**
160 +|ATZ|Reset MCU|(((
158 158  Device reset and show booting info
159 159  
160 160  LSN50 Device/LoRa ST Module
... ... @@ -168,7 +168,9 @@
168 168  <followed by the Tx and Rx information>
169 169  )))
170 170  
171 -(% style="color:blue" %)**Downlink Command: 0x04**
174 +{{info}}
175 +**Downlink Command: 0x04**
176 +{{/info}}
172 172  
173 173  (((
174 174  Format: Command Code (0x04) followed by FF.
... ... @@ -175,22 +175,23 @@
175 175  )))
176 176  
177 177  (((
178 -If the downlink payload=**04FF**, the end node will reboot.
183 +If the downlink payload=**04FF**, the end node will reboot.
184 +
185 +
179 179  )))
180 180  
181 -
182 182  == 4.3 Reset to factory Default ==
183 183  
184 -
185 185  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
186 186  
192 +{{info}}
193 +**AT Command: AT+FDR**
194 +{{/info}}
187 187  
188 -(% style="color:blue" %)**AT Command: AT+FDR**
189 -
190 -(% border="1" style="background-color:#ffffcc; color:green; width:789px" %)
191 -|=(% colspan="3" style="width: 786px;" %)Reset to factory default
192 -|(% style="width:154px" %)**Command Example**|(% style="width:175px" %)**Function**|(% style="width:456px" %)**Response**
193 -|(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
196 +(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
197 +|=(% colspan="3" style="width: 828px;" %)Reset to factory default
198 +|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
199 +|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
194 194  Device reset to factory default parameters and show booting info
195 195  
196 196  LSN50 Device/LoRa ST Module
... ... @@ -204,7 +204,9 @@
204 204  Please set the parameters or reset Device to apply change
205 205  )))
206 206  
207 -(% style="color:blue" %)**Downlink Command: 0x04**
213 +{{info}}
214 +**Downlink Command: 0x04**
215 +{{/info}}
208 208  
209 209  (((
210 210  Format: Command Code (0x04) followed by FE.
... ... @@ -217,22 +217,24 @@
217 217  
218 218  == 4.4 Show Firmware Version ==
219 219  
220 -
221 221  Feature: Show firmware version. No downlink command yet.
222 222  
230 +{{info}}
231 +**AT Command: AT+VER**
232 +{{/info}}
223 223  
224 -(% style="color:blue" %)**AT Command: AT+VER**
225 -
226 -(% border="1" style="background-color:#ffffcc; color:green; width:542px" %)
227 -|=(% colspan="3" style="width: 539px;" %)AT+VER: Image Version and Frequency Band
228 -|(% style="width:157px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:86px" %)**Response**
229 -|(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
234 +(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
235 +|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
236 +|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
237 +|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
230 230  1.3 EU868
231 231  
232 232  OK
233 233  )))
234 234  
235 -(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
243 +{{info}}
244 +**Downlink Command: 0x26 (Valid in 006 stack)**
245 +{{/info}}
236 236  
237 237  (((
238 238  Downlink Format: 0x26
... ... @@ -243,8 +243,6 @@
243 243  )))
244 244  
245 245  (((
246 -
247 -
248 248  **xx: Software Type:**
249 249  )))
250 250  
... ... @@ -253,8 +253,6 @@
253 253  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
254 254  
255 255  (((
256 -
257 -
258 258  **yy: Frequency Band:**
259 259  )))
260 260  
... ... @@ -270,8 +270,6 @@
270 270  * 0xa0: AS923-3
271 271  
272 272  (((
273 -
274 -
275 275  **zz: Subband**
276 276  )))
277 277  
... ... @@ -280,12 +280,12 @@
280 280  
281 281  == 4.5 Show System Configure ==
282 282  
283 -
284 284  Feature: Show All configure. No downlink command yet.
285 285  
289 +{{info}}
290 +**AT Command: AT+CFG**
291 +{{/info}}
286 286  
287 -(% style="color:blue" %)**AT Command: AT+CFG**
288 -
289 289  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
290 290  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
291 291  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -307,12 +307,12 @@
307 307  
308 308  == 5.1 Application EUI ==
309 309  
310 -
311 311  Feature: Get or Set the Application EUI.
312 312  
316 +{{info}}
317 +**AT Command: AT+APPEUI**
318 +{{/info}}
313 313  
314 -(% style="color:blue" %)**AT Command: AT+APPEUI**
315 -
316 316  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
317 317  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
318 318  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -321,16 +321,14 @@
321 321  )))
322 322  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
323 323  
324 -(% style="display:none" %) (%%)
325 -
326 326  == 5.2 Application Key ==
327 327  
328 -
329 329  Feature: Get or Set the Application Key.
330 330  
332 +{{info}}
333 +**AT Command: AT+APPKEY**
334 +{{/info}}
331 331  
332 -(% style="color:blue" %)**AT Command: AT+APPKEY**
333 -
334 334  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
335 335  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
336 336  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -339,16 +339,14 @@
339 339  )))
340 340  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
341 341  
342 -(% style="display:none" %) (%%)
343 -
344 344  == 5.3 Application Session Key ==
345 345  
346 -
347 347  Feature: Get or Set the Application Session Key.
348 348  
348 +{{info}}
349 +**AT Command: AT+APPSKEY**
350 +{{/info}}
349 349  
350 -(% style="color:blue" %)**AT Command: AT+APPSKEY**
351 -
352 352  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
353 353  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
354 354  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -359,16 +359,14 @@
359 359  OK
360 360  )))
361 361  
362 -(% style="display:none" %) (%%)
363 -
364 364  == 5.4 Device Address ==
365 365  
366 -
367 367  Feature: Get or Set the Device Address.
368 368  
366 +{{info}}
367 +**AT Command: AT+DADDR**
368 +{{/info}}
369 369  
370 -(% style="color:blue" %)**AT Command: AT+DADDR**
371 -
372 372  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
373 373  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
374 374  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -379,16 +379,14 @@
379 379  )))
380 380  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
381 381  
382 -(% style="display:none" %) (%%)
383 -
384 384  == 5.5 Device EUI ==
385 385  
386 -
387 387  Feature: Get or Set the Device EUI.
388 388  
384 +{{info}}
385 +**AT Command: AT+DEUI**
386 +{{/info}}
389 389  
390 -(% style="color:blue" %)**AT Command: AT+DEUI**
391 -
392 392  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
393 393  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
394 394  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -399,16 +399,14 @@
399 399  OK
400 400  )))
401 401  
402 -(% style="display:none" %) (%%)
403 -
404 404  == 5.6 Network ID ==
405 405  
406 -
407 407  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
408 408  
402 +{{info}}
403 +**AT Command: AT+NWKID**
404 +{{/info}}
409 409  
410 -(% style="color:blue" %)**AT Command: AT+NWKID**
411 -
412 412  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
413 413  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
414 414  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -417,16 +417,14 @@
417 417  )))
418 418  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
419 419  
420 -(% style="display:none" %) (%%)
421 -
422 422  == 5.7 Network Session Key ==
423 423  
424 -
425 425  Feature: Get or Set the Network Session Key
426 426  
418 +{{info}}
419 +**AT Command: AT+NWKSKEY**
420 +{{/info}}
427 427  
428 -(% style="color:blue" %)**AT Command: AT+NWKSKEY**
429 -
430 430  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
431 431  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
432 432  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -435,20 +435,18 @@
435 435  )))
436 436  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
437 437  
438 -(% style="display:none" %) (%%)
439 -
440 440  = 6. Joining and sending date on LoRaWAN network =
441 441  
442 442  == 6.1 Confirm Mode ==
443 443  
444 -=== 6.1.1  AT+CFM command before DR-LWS007 software stack ===
434 +=== AT+CFM command before DR-LWS007 software stack ===
445 445  
446 -
447 447  Feature: Get or Set the confirmation mode (0-1).
448 448  
438 +{{info}}
439 +**AT Command: AT+CFM**
440 +{{/info}}
449 449  
450 -(% style="color:blue" %)**AT Command: AT+CFM**
451 -
452 452  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
453 453  |=(% colspan="3" style="width: 707px;" %)AT+CFM
454 454  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -458,22 +458,21 @@
458 458  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
459 459  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
460 460  
461 -(% style="color:blue" %)**Downlink Command: 0x05**
451 +Downlink Command: 0x05
462 462  
463 463  Format: Command Code (0x05) followed by 2 bytes mode value.
464 464  
465 465  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
466 466  
467 -* **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
468 -* **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
457 +* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
458 +* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
469 469  
470 -(% style="display:none" %) (%%)
460 +=== AT+CFM command since DR-LWS007 software stack ===
471 471  
472 -=== 6.1.2  AT+CFM command since DR-LWS007 software stack ===
462 +{{info}}
463 +**AT Command: AT+CFM**
464 +{{/info}}
473 473  
474 -
475 -(% style="color:blue" %)**AT Command: AT+CFM**
476 -
477 477  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
478 478  |=(% colspan="3" style="width: 707px;" %)AT+CFM
479 479  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -505,40 +505,40 @@
505 505  OK
506 506  )))
507 507  
508 -(% style="color:blue" %)**Downlink Command: 0x05**
497 +{{info}}
498 +**Downlink Command: 0x05**
499 +{{/info}}
509 509  
510 510  Format: Command Code (0x05) followed by 2 bytes mode value.
511 511  
512 512  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
513 513  
514 -* **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
515 -* **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
505 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
506 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
516 516  
517 -(% style="display:none" %) (%%)
518 -
519 519  == 6.2 Confirm Status ==
520 520  
521 -
522 522  Feature: Get confirmation status of the last AT+SEND (0-1).
523 523  
512 +{{info}}
513 +**AT Command: AT+CFS**
514 +{{/info}}
524 524  
525 -(% style="color:blue" %)**AT Command: AT+CFS**
526 -
527 -(% border="1" style="background-color:#ffffcc; color:green; width:463px" %)
528 -|=(% colspan="3" style="width: 460px;" %)AT+CFS
529 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:107px" %)**Response**
530 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
516 +(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
517 +|=(% colspan="3" style="width: 531px;" %)AT+CFS
518 +|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
519 +|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
531 531  OK
532 532  )))
533 533  
534 534  == 6.3 Join LoRa® Network ==
535 535  
536 -
537 537  Feature: Join network.
538 538  
527 +{{info}}
528 +**AT Command: AT+JOIN**
529 +{{/info}}
539 539  
540 -(% style="color:blue" %)**AT Command: AT+JOIN**
541 -
542 542  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
543 543  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
544 544  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -550,12 +550,12 @@
550 550  
551 551  == 6.4 LoRa® Network Join Mode ==
552 552  
553 -
554 554  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
555 555  
544 +{{info}}
545 +**AT Command: AT+NJM**
546 +{{/info}}
556 556  
557 -(% style="color:blue" %)**AT Command: AT+NJM**
558 -
559 559  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
560 560  |=(% colspan="3" style="width: 750px;" %)AT+NJM
561 561  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -565,25 +565,25 @@
565 565  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
566 566  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
567 567  
568 -(% style="color:blue" %)**Downlink Command: 0x20**
557 +{{info}}
558 +**Downlink Command: 0x20**
559 +{{/info}}
569 569  
570 570  Format: Command Code (0x20) followed by 1 bytes mode value.
571 571  
572 572  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
573 573  
574 -* **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
575 -* **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
565 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
566 +* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
576 576  
577 -(% style="display:none" %) (%%)
578 -
579 579  == 6.5 LoRa® Network Join Status ==
580 580  
581 -
582 582  Feature: LoRa® Network Join Status.
583 583  
572 +{{info}}
573 +**AT Command: AT+NJS**
574 +{{/info}}
584 584  
585 -(% style="color:blue" %)**AT Command: AT+NJS**
586 -
587 587  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
588 588  |=(% colspan="3" style="width: 495px;" %)AT+NJS
589 589  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -591,16 +591,14 @@
591 591  OK
592 592  )))
593 593  
594 -(% style="display:none" %) (%%)
595 -
596 596  == 6.6 Print Last Received Data in Raw Format ==
597 597  
598 -
599 599  Feature: Print Last Received Data in Raw Format<port:data>.
600 600  
587 +{{info}}
588 +**AT Command: AT+RECV**
589 +{{/info}}
601 601  
602 -(% style="color:blue" %)**AT Command: AT+RECV**
603 -
604 604  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
605 605  |=(% colspan="3" style="width: 584px;" %)AT+RECV
606 606  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -608,16 +608,14 @@
608 608  OK
609 609  )))
610 610  
611 -(% style="display:none" %) (%%)
612 -
613 613  == 6.7 Print Last Received Data in Binary Format ==
614 614  
615 -
616 616  Feature: Print Last Received Data in Binary Format<port:data>.
617 617  
602 +{{info}}
603 +**AT Command: AT+RECVB**
604 +{{/info}}
618 618  
619 -(% style="color:blue" %)**AT Command: AT+RECVB**
620 -
621 621  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
622 622  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
623 623  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -625,54 +625,53 @@
625 625  OK
626 626  )))
627 627  
628 -(% style="display:none" %) (%%)
629 -
630 630  == 6.8 Send Text Data ==
631 631  
632 -
633 633  Feature: Send Text Data<port:data>.
634 634  
617 +{{info}}
618 +**AT Command: AT+SEND**
619 +{{/info}}
635 635  
636 -(% style="color:blue" %)**AT Command: AT+SEND**
637 -
638 638  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
639 639  |=(% colspan="3" style="width: 988px;" %)AT+SEND
640 640  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
641 641  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
642 642  While Error in format, return
626 +
643 643  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
628 +
629 +
644 644  )))
645 645  
646 -(% style="display:none" %) (%%)
647 -
648 648  == 6.9 Send Hexadecimal Data ==
649 649  
650 -
651 651  Feature: Send hexadecimal data along with the application port.
652 652  
636 +{{info}}
637 +**AT Command: AT+SENDB**
638 +{{/info}}
653 653  
654 -(% style="color:blue" %)**AT Command: AT+SENDB**
640 +(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
641 +|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
642 +|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
643 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
644 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
645 +AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
655 655  
656 -(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
657 -|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
658 -|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
659 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
660 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
661 -AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
647 +
662 662  )))
663 663  
664 -(% style="display:none" %) (%%)
665 -
666 666  = 7. LoRaWAN network management =
667 667  
668 668  == 7.1 Adaptive Data Rate ==
669 669  
670 -
671 671  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
672 672  
656 +{{info}}
657 +**AT Command: AT+ADR**
658 +{{/info}}
673 673  
674 -(% style="color:blue" %)**AT Command: AT+ADR**
675 -
676 676  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
677 677  |=(% colspan="3" style="width: 680px;" %)AT+ADR
678 678  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -684,23 +684,24 @@
684 684  AT_PARAM_ERROR
685 685  )))
686 686  
687 -(% style="color:blue" %)**Downlink Command: 0x22**
671 +{{info}}
672 +**Downlink Command: 0x22**
673 +{{/info}}
688 688  
675 +
689 689  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
690 690  
691 -* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
692 -* **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
678 +* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
679 +* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
693 693  
694 -(% style="display:none" %) (%%)
695 -
696 696  == 7.2 LoRa® Class ==
697 697  
698 -
699 699  Feature: Get or Set the Device Class(Currently only support class A, class C).
700 700  
685 +{{info}}
686 +**AT Command:AT+CLASS**
687 +{{/info}}
701 701  
702 -(% style="color:blue" %)**AT Command:  AT+CLASS**
703 -
704 704  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
705 705  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
706 706  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -708,18 +708,17 @@
708 708  OK
709 709  )))
710 710  |(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((
696 +
711 711  )))
712 712  
713 -(% style="display:none" %) (%%)
714 -
715 715  == 7.3 Duty Cycle Setting ==
716 716  
701 +Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
717 717  
718 -Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
703 +{{info}}
704 +**AT Command:AT+DCS**
705 +{{/info}}
719 719  
720 -
721 -(% style="color:blue" %)**AT Command:  AT+DCS**
722 -
723 723  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
724 724  |=(% colspan="3" style="width: 512px;" %)AT+DCS
725 725  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -727,23 +727,17 @@
727 727  OK
728 728  )))
729 729  |(% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((
714 +
730 730  )))
731 731  
732 -(% style="display:none" %) (%%)
733 -
734 734  == 7.4 Data Rate ==
735 735  
719 +Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
736 736  
737 -Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
721 +{{info}}
722 +**AT Command: AT+DR**
723 +{{/info}}
738 738  
739 -(% style="color:red" %)
740 -**Notice:**
741 -
742 -* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
743 -* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
744 -
745 -(% style="color:blue" %)**AT Command: AT+DR**
746 -
747 747  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
748 748  |=(% colspan="3" style="width: 463px;" %)AT+DR
749 749  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -754,23 +754,24 @@
754 754  
755 755  )))
756 756  
757 -(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
735 +{{info}}
736 +**Downlink Command: 0x2200aaFF**
737 +{{/info}}
758 758  
739 +
759 759  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
760 760  
761 -* **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
762 -* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
742 +* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
743 +* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
763 763  
764 -(% style="display:none" %) (%%)
765 -
766 766  == 7.5 Frame Counter Downlink ==
767 767  
768 -
769 769  Feature: Get or Set the Frame Counter Downlink.
770 770  
749 +{{info}}
750 +**AT Command:AT+FCD**
751 +{{/info}}
771 771  
772 -(% style="color:blue" %)**AT Command:  AT+FCD**
773 -
774 774  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
775 775  |=(% colspan="3" style="width: 690px;" %)AT+FCD
776 776  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -779,6 +779,8 @@
779 779  )))
780 780  |(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
781 781  OK
761 +
762 +
782 782  )))
783 783  
784 784  == 7.6 Frame Counter Uplink ==
... ... @@ -785,9 +785,10 @@
785 785  
786 786  Feature: Get or Set the Frame Counter Uplink.
787 787  
769 +{{info}}
770 +**AT Command:AT+FCU**
771 +{{/info}}
788 788  
789 -(% style="color:blue" %)**AT Command:  AT+FCU**
790 -
791 791  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
792 792  |=(% colspan="3" style="width: 531px;" %)AT+FCU
793 793  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -800,12 +800,12 @@
800 800  
801 801  == 7.7 Join Accept Delay1 ==
802 802  
803 -
804 804  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
805 805  
787 +{{info}}
788 +**AT Command:AT+JN1DL**
789 +{{/info}}
806 806  
807 -(% style="color:blue" %)**AT Command:  AT+JN1DL**
808 -
809 809  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
810 810  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
811 811  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -818,12 +818,12 @@
818 818  
819 819  == 7.8 Join Accept Delay2 ==
820 820  
821 -
822 822  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
823 823  
805 +{{info}}
806 +**AT Command:AT+JN2DL**
807 +{{/info}}
824 824  
825 -(% style="color:blue" %)**AT Command:  AT+JN2DL**
826 -
827 827  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
828 828  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
829 829  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -836,14 +836,14 @@
836 836  
837 837  == 7.9 Public Network Mode ==
838 838  
839 -
840 840  Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
841 841  
842 -(% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
823 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
843 843  
825 +{{info}}
826 +**AT Command:AT+PNM**
827 +{{/info}}
844 844  
845 -(% style="color:blue" %)**AT Command:  AT+PNM**
846 -
847 847  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
848 848  |=(% colspan="3" style="width: 664px;" %)AT+PNM
849 849  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -863,12 +863,12 @@
863 863  
864 864  == 7.10 Receive Delay1 ==
865 865  
866 -
867 867  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
868 868  
850 +{{info}}
851 +**AT Command:AT+RX1DL**
852 +{{/info}}
869 869  
870 -(% style="color:blue" %)**AT Command: AT+RX1DL**
871 -
872 872  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
873 873  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
874 874  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -881,12 +881,12 @@
881 881  
882 882  == 7.11 Receive Delay2 ==
883 883  
884 -
885 885  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
886 886  
868 +{{info}}
869 +**AT Command:AT+RX2DL**
870 +{{/info}}
887 887  
888 -(% style="color:blue" %)**AT Command: AT+RX2DL**
889 -
890 890  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
891 891  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
892 892  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -899,12 +899,12 @@
899 899  
900 900  == 7.12 Rx2 Window Data Rate ==
901 901  
902 -
903 903  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
904 904  
886 +{{info}}
887 +**AT Command:AT+RX2DR**
888 +{{/info}}
905 905  
906 -(% style="color:blue" %)**AT Command:  AT+RX2DR**
907 -
908 908  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
909 909  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
910 910  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -917,12 +917,12 @@
917 917  
918 918  == 7.13 Rx2 Window Frequency ==
919 919  
920 -
921 921  Feature: Get or Set the Rx2 window frequency
922 922  
904 +{{info}}
905 +**AT Command:AT+RX2FQ**
906 +{{/info}}
923 923  
924 -(% style="color:blue" %)**AT Command:  AT+RX2FQ**
925 -
926 926  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
927 927  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
928 928  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -935,14 +935,12 @@
935 935  
936 936  == 7.14 Transmit Power ==
937 937  
938 -
939 939  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
940 940  
941 -(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
922 +{{info}}
923 +**AT Command:AT+TXP**
924 +{{/info}}
942 942  
943 -
944 -(% style="color:blue" %)**AT Command:  AT+TXP**
945 -
946 946  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
947 947  |=(% colspan="3" style="width: 462px;" %)AT+TXP
948 948  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -957,17 +957,17 @@
957 957  
958 958  If the downlink payload=22000100, it means setting the TXP to 0.
959 959  
960 -* **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
961 -* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+TXP=0.
940 +* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
941 +* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
962 962  
963 963  == 7.15 RSSI of the Last Received Packet ==
964 964  
965 -
966 966  Feature: Get or Set the Rx2 window frequency
967 967  
947 +{{info}}
948 +**AT Command:AT+RSSI**
949 +{{/info}}
968 968  
969 -(% style="color:blue" %)**AT Command:AT+RSSI**
970 -
971 971  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
972 972  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
973 973  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -977,12 +977,12 @@
977 977  
978 978  == 7.16 SNR of the Last Received Packet ==
979 979  
980 -
981 981  Feature: Get the SNR of the last received packet
982 982  
962 +{{info}}
963 +**AT Command:AT+SNR**
964 +{{/info}}
983 983  
984 -(% style="color:blue" %)**AT Command:  AT+SNR**
985 -
986 986  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
987 987  |=(% colspan="3" style="width: 568px;" %)AT+SNR
988 988  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -992,12 +992,12 @@
992 992  
993 993  == 7.17 Application Port ==
994 994  
995 -
996 996  Feature: Get or set the application port.
997 997  
977 +{{info}}
978 +**AT Command: AT+PORT**
979 +{{/info}}
998 998  
999 -(% style="color:blue" %)**AT Command: AT+PORT**
1000 -
1001 1001  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
1002 1002  |=(% colspan="3" style="width: 497px;" %)AT+PORT
1003 1003  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
... ... @@ -1006,23 +1006,25 @@
1006 1006  )))
1007 1007  |(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
1008 1008  
1009 -(% style="color:blue" %)**Downlink Command: 0x23**
989 +{{info}}
990 +**Downlink Command: 0x23**
991 +{{/info}}
1010 1010  
1011 1011  Format: Command Code (0x23) followed by 1 bytes port value.
1012 1012  
1013 1013  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
1014 1014  
1015 -* **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1016 -* **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
997 +* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
998 +* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
1017 1017  
1018 1018  == 7.18 Single Channel Mode ==
1019 1019  
1020 -
1021 1021  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
1022 1022  
1004 +{{info}}
1005 +**AT Command: AT+CHS**
1006 +{{/info}}
1023 1023  
1024 -(% style="color:blue" %)**AT Command: AT+CHS**
1025 -
1026 1026  (% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
1027 1027  |=(% colspan="3" style="width: 600px;" %)AT+CHS
1028 1028  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -1033,12 +1033,12 @@
1033 1033  
1034 1034  == 7.19 Eight Channel Mode ==
1035 1035  
1036 -
1037 1037  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1038 1038  
1020 +{{info}}
1021 +**AT Command: AT+CHE**
1022 +{{/info}}
1039 1039  
1040 -(% style="color:blue" %)**AT Command: AT+CHE**
1041 -
1042 1042  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1043 1043  |=(% colspan="3" style="width: 707px;" %)AT+CHE
1044 1044  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -1049,23 +1049,25 @@
1049 1049  )))
1050 1050  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1051 1051  
1052 -(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
1034 +{{info}}
1035 +**Downlink Command: 0x24**
1036 +{{/info}}
1053 1053  
1054 1054  Format: Command Code (0x24) followed by 1 bytes channel value.
1055 1055  
1056 1056  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1057 1057  
1058 -* **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1059 -* **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1042 +* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1043 +* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
1060 1060  
1061 1061  == 7.20 Get or Set RXwindows1 timeout ==
1062 1062  
1047 +Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1063 1063  
1064 -Feature: Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1049 +{{info}}
1050 +**AT Command: AT+RX1WTO**
1051 +{{/info}}
1065 1065  
1066 -
1067 -(% style="color:blue" %)**AT Command: AT+RX1WTO**
1068 -
1069 1069  (% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1070 1070  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1071 1071  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
... ... @@ -1075,17 +1075,11 @@
1075 1075  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1076 1076  
1077 1077  (((
1078 -
1079 -
1080 -
1081 -(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1082 -
1083 -
1062 +**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1084 1084  )))
1085 1085  
1086 1086  [[image:image-20220526162535-1.png]]
1087 1087  
1088 -
1089 1089  (((
1090 1090  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1091 1091  
... ... @@ -1094,12 +1094,12 @@
1094 1094  
1095 1095  == 7.21 Get or Set RXwindows2 timeout ==
1096 1096  
1075 +Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1097 1097  
1098 -Feature: Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1077 +{{info}}
1078 +**AT Command: AT+RX2WTO**
1079 +{{/info}}
1099 1099  
1100 -
1101 -(% style="color:blue" %)**AT Command: AT+RX2WTO**
1102 -
1103 1103  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1104 1104  |=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1105 1105  |(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
... ... @@ -1110,12 +1110,12 @@
1110 1110  
1111 1111  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1112 1112  
1113 -
1114 1114  Feature: Get or Set uplinkdwelltime
1115 1115  
1093 +{{info}}
1094 +**AT Command: AT+DWELLT**
1095 +{{/info}}
1116 1116  
1117 -(% style="color:blue" %)**AT Command: AT+DWELLT**
1118 -
1119 1119  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1120 1120  |=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1121 1121  |(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
... ... @@ -1124,23 +1124,23 @@
1124 1124  )))
1125 1125  |(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
1126 1126  
1127 -(% style="color:blue" %)**Downlink Command: 0x25**
1105 +{{info}}
1106 +**Downlink Command: 0x25**
1107 +{{/info}}
1128 1128  
1129 1129  Format: Command Code (0x25) followed by 1 bytes state value.
1130 1130  
1131 1131  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1132 1132  
1133 -* **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1134 -* **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1113 +* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1114 +* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1135 1135  
1136 1136  == 7.23 Set Packet Receiving Response Level ==
1137 1137  
1138 -
1139 1139  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1140 1140  
1120 +RPL value:
1141 1141  
1142 -**RPL value:**
1143 -
1144 1144  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1145 1145  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1146 1146  * **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
... ... @@ -1147,13 +1147,15 @@
1147 1147  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1148 1148  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1149 1149  
1150 -**Case Analyes:**
1128 +Case Analyes:
1151 1151  
1152 1152  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1153 1153  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1154 1154  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1155 1155  
1156 -(% style="color:blue" %)**AT Command: AT+RPL**
1134 +{{info}}
1135 +**AT Command: AT+RPL**
1136 +{{/info}}
1157 1157  
1158 1158  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1159 1159  |=(% colspan="3" style="width: 533px;" %)AT+RPL
... ... @@ -1163,55 +1163,52 @@
1163 1163  )))
1164 1164  |(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
1165 1165  
1166 -(% style="color:blue" %)**Downlink Command: 0x21**
1146 +{{info}}
1147 +**Downlink Command: 0x21**
1148 +{{/info}}
1167 1167  
1168 1168  Format: Command Code (0x21) followed by 1 bytes level value.
1169 1169  
1170 1170  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1171 1171  
1172 -* **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1173 -* **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1154 +* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1155 +* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1174 1174  
1175 1175  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1176 1176  
1159 +{{info}}
1160 +**AT Command: AT+SETMAXNBTRANS **
1161 +{{/info}}
1177 1177  
1178 -(% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1179 -
1180 -(% border="1" style="background-color:#ffffcc; color:green; width:589px" %)
1181 -|=(% colspan="3" style="width: 586px;" %)AT+**SETMAXNBTRANS**
1182 -|(% style="width:227px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:87px" %)**Response**
1183 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1163 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1164 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1165 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1166 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1184 1184  OK
1185 1185  )))
1186 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1187 -value2: 0: uplink fcnt doesn't change for each NBTrans;
1188 -
1189 -1: uplink fcnt increase by 1 for each NBTrans.
1190 -)))|(% style="width:87px" %)(((
1169 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1191 1191  1
1192 1192  
1193 1193  OK
1194 1194  )))
1195 1195  
1196 -(% style="color:blue" %)**Downlink Command: 0x33**
1175 +{{info}}
1176 +**Downlink Command: 0x33**
1177 +{{/info}}
1197 1197  
1198 1198  Format: Command Code (0x33) followed by 2 bytes mode value.
1199 1199  
1200 1200  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1201 1201  
1202 -* Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1203 -* Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1183 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1184 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1204 1204  
1205 1205  == 7.25 Device offline rejoining （LWS007) ==
1206 1206  
1188 +{{info}}
1189 +**AT Command: AT+DDETECT**
1190 +{{/info}}
1207 1207  
1208 -(% style="color:blue" %)**AT Command: AT+DDETECT**
1209 -
1210 -AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
1211 -
1212 -* ACK_Timout_1: Unit: min
1213 -* ACK_Timout_2: Unit: min
1214 -
1215 1215  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1216 1216  |=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1217 1217  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -1243,23 +1243,22 @@
1243 1243  OK
1244 1244  )))
1245 1245  
1246 -(% style="color:blue" %)**Downlink Command: 0x32**
1223 +{{info}}
1224 +**Downlink Command: 0x33**
1225 +{{/info}}
1247 1247  
1248 1248  Format: Command Code (0x32) followed by 2 bytes mode value.
1249 1249  
1250 -If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1229 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1251 1251  
1252 -* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1253 -** 0x01 : Flag
1254 -** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1255 -** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
1256 -** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1231 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1257 1257  
1258 1258  == 7.26 Request the server to send an ACK ==
1259 1259  
1235 +{{info}}
1236 +**AT Command: AT+PNACKMD**
1237 +{{/info}}
1260 1260  
1261 -(% style="color:blue" %)**AT Command: AT+PNACKMD**
1262 -
1263 1263  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1264 1264  |=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1265 1265  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
... ... @@ -1274,47 +1274,49 @@
1274 1274  
1275 1275  == 7.27 Adjust network rejoining interval ==
1276 1276  
1253 +{{info}}
1254 +**AT Command: AT+RJTDC**
1255 +{{/info}}
1277 1277  
1278 -(% style="color:blue" %)**AT Command: AT+RJTDC**
1279 -
1280 1280  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1281 1281  |=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1282 1282  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1283 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1260 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1284 1284  OK
1285 1285  
1286 -the interval is 30 min
1263 +the interval is 30000ms = 30s
1287 1287  )))
1288 -|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1289 -Set the ReJoin data transmission interval to 60 min
1265 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1266 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1290 1290  )))
1291 1291  
1292 -(% style="color:blue" %)**Downlink Command: 0x26**
1269 +{{info}}
1270 +**Downlink Command: 0x26**
1271 +{{/info}}
1293 1293  
1294 1294  Format: Command Code (0x26) followed by 2 bytes mode value.
1295 1295  
1296 1296  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1297 1297  
1298 -* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1299 -* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1277 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1278 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1300 1300  
1301 1301  = 8. AT Commands Combination =
1302 1302  
1303 1303  == 8.1 Set a fix RX2DR for downlink window ==
1304 1304  
1284 +* **AT+ADR=0 **~-~-> Disable ADR first
1285 +* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
1305 1305  
1306 -* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1307 -* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1308 -
1309 1309  == 8.2 Use Downlink Command to set a fix uplink DR ==
1310 1310  
1289 +{{info}}
1290 +**Downlink Command: 0x22000500**
1291 +{{/info}}
1311 1311  
1312 -(% style="color:blue" %)**Downlink Command: 0x22000500**
1293 +Same as:
1313 1313  
1314 -**Same as:**
1315 -
1316 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1317 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1318 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1319 -
1320 -
1295 +* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1296 +* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1297 +* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1298 +~)~)~)

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0