Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -9,25 +9,27 @@
9	9
10	10	Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11	11
12		-* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13		-* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
	12	+* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
	13	+* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
14	14
15	15	(((
16	16	**This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
	17	+
	18	+
	19	+
17	17	)))
18	18
19		-
20	20	= 2. How to use AT Commands or Downlink command =
21	21
22	22
23		-* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24		-* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
	25	+* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
	26	+* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
25	25	** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26		-** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
	28	+** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
27	27	** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
28	28
29		-(% style="display:none" %) (%%)
30	30
	32	+
31	31	= 3. Support End Node and firmware version =
32	32
33	33
...	...	@@ -102,8 +102,12 @@
102	102	)))
103	103	)))
104	104
	107	+
	108	+
	109	+
105	105	= 4. System Management Commands =
106	106
	112	+
107	107	== 4.1 Change Uplink Interval ==
108	108
109	109
...	...	@@ -133,12 +133,16 @@
133	133	)))
134	134
135	135	(((
136		-If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
	142	+If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
137	137	)))
138	138
139	139	* **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
140	140	* **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
141	141
	148	+
	149	+
	150	+
	151	+
142	142	== 4.2 Reboot End Node ==
143	143
144	144
...	...	@@ -173,6 +173,7 @@
173	173	(((
174	174	If the downlink payload=**04FF**, the end node will reboot.
175	175
	186	+
176	176
177	177	)))
178	178
...	...	@@ -212,6 +212,7 @@
212	212	)))
213	213
214	214
	226	+
215	215	== 4.4 Show Firmware Version ==
216	216
217	217
...	...	@@ -242,6 +242,7 @@
242	242	(((
243	243
244	244
	257	+
245	245	**xx: Software Type:**
246	246	)))
247	247
...	...	@@ -275,6 +275,7 @@
275	275	firmware version: v1.1.0 ~-~-> 110
276	276
277	277
	291	+
278	278	== 4.5 Show System Configure ==
279	279
280	280
...	...	@@ -300,8 +300,12 @@
300	300	OK
301	301	)))
302	302
	317	+
	318	+
	319	+
303	303	= 5. Keys, IDs and EUIs management =
304	304
	322	+
305	305	== 5.1 Application EUI ==
306	306
307	307
...	...	@@ -318,6 +318,9 @@
318	318	)))
319	319	|(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
320	320
	339	+
	340	+
	341	+
321	321	== 5.2 Application Key ==
322	322
323	323
...	...	@@ -334,6 +334,9 @@
334	334	)))
335	335	|(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
336	336
	358	+
	359	+
	360	+
337	337	== 5.3 Application Session Key ==
338	338
339	339
...	...	@@ -352,6 +352,9 @@
352	352	OK
353	353	)))
354	354
	379	+
	380	+
	381	+
355	355	== 5.4 Device Address ==
356	356
357	357
...	...	@@ -370,6 +370,9 @@
370	370	)))
371	371	|(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
372	372
	400	+
	401	+
	402	+
373	373	== 5.5 Device EUI ==
374	374
375	375
...	...	@@ -388,6 +388,9 @@
388	388	OK
389	389	)))
390	390
	421	+
	422	+
	423	+
391	391	== 5.6 Network ID ==
392	392
393	393
...	...	@@ -404,6 +404,9 @@
404	404	)))
405	405	|(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
406	406
	440	+
	441	+
	442	+
407	407	== 5.7 Network Session Key ==
408	408
409	409
...	...	@@ -420,10 +420,15 @@
420	420	)))
421	421	|(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
422	422
	459	+
	460	+
	461	+
423	423	= 6. Joining and sending date on LoRaWAN network =
424	424
	464	+
425	425	== 6.1 Confirm Mode ==
426	426
	467	+
427	427	=== 6.1.1  AT+CFM command before DR-LWS007 software stack ===
428	428
429	429
...	...	@@ -450,6 +450,9 @@
450	450	* **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
451	451	* **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
452	452
	494	+
	495	+
	496	+
453	453	=== 6.1.2  AT+CFM command since DR-LWS007 software stack ===
454	454
455	455
...	...	@@ -495,6 +495,9 @@
495	495	* **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
496	496	* **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
497	497
	542	+
	543	+
	544	+
498	498	== 6.2 Confirm Status ==
499	499
500	500
...	...	@@ -503,13 +503,16 @@
503	503
504	504	(% style="color:blue" %)**AT Command: AT+CFS**
505	505
506		-(% border="1" style="background-color:#ffffcc; color:green; width:463px" %)
507		-|=(% colspan="3" style="width: 460px;" %)AT+CFS
508		-|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:107px" %)**Response**
509		-|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
	553	+(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
	554	+|=(% colspan="3" style="width: 531px;" %)AT+CFS
	555	+|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
	556	+|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
510	510	OK
511	511	)))
512	512
	560	+
	561	+
	562	+
513	513	== 6.3 Join LoRa® Network ==
514	514
515	515
...	...	@@ -527,6 +527,9 @@
527	527	While Error in format, return AT_BUSY_ERROR
528	528	)))
529	529
	580	+
	581	+
	582	+
530	530	== 6.4 LoRa® Network Join Mode ==
531	531
532	532
...	...	@@ -553,6 +553,9 @@
553	553	* **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
554	554	* **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
555	555
	609	+
	610	+
	611	+
556	556	== 6.5 LoRa® Network Join Status ==
557	557
558	558
...	...	@@ -568,6 +568,9 @@
568	568	OK
569	569	)))
570	570
	627	+
	628	+
	629	+
571	571	== 6.6 Print Last Received Data in Raw Format ==
572	572
573	573
...	...	@@ -583,6 +583,9 @@
583	583	OK
584	584	)))
585	585
	645	+
	646	+
	647	+
586	586	== 6.7 Print Last Received Data in Binary Format ==
587	587
588	588
...	...	@@ -598,6 +598,9 @@
598	598	OK
599	599	)))
600	600
	663	+
	664	+
	665	+
601	601	== 6.8 Send Text Data ==
602	602
603	603
...	...	@@ -617,6 +617,9 @@
617	617
618	618	)))
619	619
	685	+
	686	+
	687	+
620	620	== 6.9 Send Hexadecimal Data ==
621	621
622	622
...	...	@@ -625,18 +625,22 @@
625	625
626	626	(% style="color:blue" %)**AT Command: AT+SENDB**
627	627
628		-(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
629		-|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
630		-|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
631		-|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
632		-|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
	696	+(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
	697	+|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
	698	+|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
	699	+|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
	700	+|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
633	633	AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
634	634
635	635
636	636	)))
637	637
	706	+
	707	+
	708	+
638	638	= 7. LoRaWAN network management =
639	639
	711	+
640	640	== 7.1 Adaptive Data Rate ==
641	641
642	642
...	...	@@ -663,6 +663,10 @@
663	663	* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
664	664	* **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
665	665
	738	+
	739	+
	740	+
	741	+
666	666	== 7.2 LoRa® Class ==
667	667
668	668
...	...	@@ -669,7 +669,7 @@
669	669	Feature: Get or Set the Device Class(Currently only support class A, class C).
670	670
671	671
672		-(% style="color:blue" %)**AT Command:  AT+CLASS**
	748	+(% style="color:blue" %)**AT Command:AT+CLASS**
673	673
674	674	(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
675	675	|=(% colspan="3" style="width: 504px;" %)AT+CLASS
...	...	@@ -681,13 +681,16 @@
681	681
682	682	)))
683	683
	760	+
	761	+
	762	+
684	684	== 7.3 Duty Cycle Setting ==
685	685
686	686
687		-Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
	766	+Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
688	688
689	689
690		-(% style="color:blue" %)**AT Command:  AT+DCS**
	769	+(% style="color:blue" %)**AT Command:AT+DCS**
691	691
692	692	(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
693	693	|=(% colspan="3" style="width: 512px;" %)AT+DCS
...	...	@@ -699,17 +699,15 @@
699	699
700	700	)))
701	701
702		-== 7.4 Data Rate ==
703	703
704	704
705		-Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
706	706
707		-(% style="color:red" %)
708		-**Notice:**
	784	+== 7.4 Data Rate ==
709	709
710		-* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
711		-* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
712	712
	787	+Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
	788	+
	789	+
713	713	(% style="color:blue" %)**AT Command: AT+DR**
714	714
715	715	(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
...	...	@@ -729,6 +729,10 @@
729	729	* **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
730	730	* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
731	731
	809	+
	810	+
	811	+
	812	+
732	732	== 7.5 Frame Counter Downlink ==
733	733
734	734
...	...	@@ -735,7 +735,7 @@
735	735	Feature: Get or Set the Frame Counter Downlink.
736	736
737	737
738		-(% style="color:blue" %)**AT Command:  AT+FCD**
	819	+(% style="color:blue" %)**AT Command:AT+FCD**
739	739
740	740	(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
741	741	|=(% colspan="3" style="width: 690px;" %)AT+FCD
...	...	@@ -747,12 +747,15 @@
747	747	OK
748	748	)))
749	749
	831	+
	832	+
	833	+
750	750	== 7.6 Frame Counter Uplink ==
751	751
752	752	Feature: Get or Set the Frame Counter Uplink.
753	753
754	754
755		-(% style="color:blue" %)**AT Command:  AT+FCU**
	839	+(% style="color:blue" %)**AT Command:AT+FCU**
756	756
757	757	(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
758	758	|=(% colspan="3" style="width: 531px;" %)AT+FCU
...	...	@@ -764,6 +764,9 @@
764	764
765	765	)))
766	766
	851	+
	852	+
	853	+
767	767	== 7.7 Join Accept Delay1 ==
768	768
769	769
...	...	@@ -770,7 +770,7 @@
770	770	Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
771	771
772	772
773		-(% style="color:blue" %)**AT Command:  AT+JN1DL**
	860	+(% style="color:blue" %)**AT Command:AT+JN1DL**
774	774
775	775	(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
776	776	|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
...	...	@@ -782,13 +782,15 @@
782	782
783	783	)))
784	784
785		-== 7.8 Join Accept Delay2 ==
786	786
787	787
	874	+
	875	+== 7.8 Join Accept Delay2 ==
	876	+
788	788	Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
789	789
790	790
791		-(% style="color:blue" %)**AT Command:  AT+JN2DL**
	880	+(% style="color:blue" %)**AT Command:AT+JN2DL**
792	792
793	793	(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
794	794	|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
...	...	@@ -800,6 +800,9 @@
800	800
801	801	)))
802	802
	892	+
	893	+
	894	+
803	803	== 7.9 Public Network Mode ==
804	804
805	805
...	...	@@ -808,7 +808,7 @@
808	808	(% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
809	809
810	810
811		-(% style="color:blue" %)**AT Command:  AT+PNM**
	903	+(% style="color:blue" %)**AT Command:AT+PNM**
812	812
813	813	(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
814	814	|=(% colspan="3" style="width: 664px;" %)AT+PNM
...	...	@@ -827,6 +827,9 @@
827	827	)))
828	828	|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
829	829
	922	+
	923	+
	924	+
830	830	== 7.10 Receive Delay1 ==
831	831
832	832
...	...	@@ -833,7 +833,7 @@
833	833	Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
834	834
835	835
836		-(% style="color:blue" %)**AT Command: AT+RX1DL**
	931	+(% style="color:blue" %)**AT Command:AT+RX1DL**
837	837
838	838	(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
839	839	|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
...	...	@@ -845,6 +845,9 @@
845	845
846	846	)))
847	847
	943	+
	944	+
	945	+
848	848	== 7.11 Receive Delay2 ==
849	849
850	850
...	...	@@ -851,7 +851,7 @@
851	851	Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
852	852
853	853
854		-(% style="color:blue" %)**AT Command: AT+RX2DL**
	952	+(% style="color:blue" %)**AT Command:AT+RX2DL**
855	855
856	856	(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
857	857	|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
...	...	@@ -863,6 +863,9 @@
863	863
864	864	)))
865	865
	964	+
	965	+
	966	+
866	866	== 7.12 Rx2 Window Data Rate ==
867	867
868	868
...	...	@@ -869,7 +869,7 @@
869	869	Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
870	870
871	871
872		-(% style="color:blue" %)**AT Command:  AT+RX2DR**
	973	+(% style="color:blue" %)**AT Command:AT+RX2DR**
873	873
874	874	(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
875	875	|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
...	...	@@ -881,6 +881,9 @@
881	881
882	882	)))
883	883
	985	+
	986	+
	987	+
884	884	== 7.13 Rx2 Window Frequency ==
885	885
886	886
...	...	@@ -887,7 +887,7 @@
887	887	Feature: Get or Set the Rx2 window frequency
888	888
889	889
890		-(% style="color:blue" %)**AT Command:  AT+RX2FQ**
	994	+(% style="color:blue" %)**AT Command:AT+RX2FQ**
891	891
892	892	(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
893	893	|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
...	...	@@ -899,15 +899,18 @@
899	899
900	900	)))
901	901
	1006	+
	1007	+
	1008	+
902	902	== 7.14 Transmit Power ==
903	903
904	904
905	905	Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
906	906
907		-(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
	1014	+Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor
908	908
909	909
910		-(% style="color:blue" %)**AT Command:  AT+TXP**
	1017	+(% style="color:blue" %)**AT Command:AT+TXP**
911	911
912	912	(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
913	913	|=(% colspan="3" style="width: 462px;" %)AT+TXP
...	...	@@ -926,6 +926,9 @@
926	926	* **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
927	927	* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+TXP=0.
928	928
	1036	+
	1037	+
	1038	+
929	929	== 7.15 RSSI of the Last Received Packet ==
930	930
931	931
...	...	@@ -941,6 +941,9 @@
941	941	OK
942	942	)))
943	943
	1054	+
	1055	+
	1056	+
944	944	== 7.16 SNR of the Last Received Packet ==
945	945
946	946
...	...	@@ -947,7 +947,7 @@
947	947	Feature: Get the SNR of the last received packet
948	948
949	949
950		-(% style="color:blue" %)**AT Command:  AT+SNR**
	1063	+(% style="color:blue" %)**AT Command:AT+SNR**
951	951
952	952	(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
953	953	|=(% colspan="3" style="width: 568px;" %)AT+SNR
...	...	@@ -956,6 +956,9 @@
956	956	OK
957	957	)))
958	958
	1072	+
	1073	+
	1074	+
959	959	== 7.17 Application Port ==
960	960
961	961
...	...	@@ -981,6 +981,7 @@
981	981	* **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
982	982	* **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
983	983
	1100	+
984	984	== 7.18 Single Channel Mode ==
985	985
986	986
...	...	@@ -1015,7 +1015,7 @@
1015	1015	)))
1016	1016	|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1017	1017
1018		-(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
	1135	+(% style="color:blue" %)**Downlink Command: 0x24**
1019	1019
1020	1020	Format: Command Code (0x24) followed by 1 bytes channel value.
1021	1021
...	...	@@ -1024,6 +1024,7 @@
1024	1024	* **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1025	1025	* **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1026	1026
	1144	+
1027	1027	== 7.20 Get or Set RXwindows1 timeout ==
1028	1028
1029	1029
...	...	@@ -1043,9 +1043,8 @@
1043	1043	(((
1044	1044
1045	1045
	1164	+**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1046	1046
1047		-(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1048		-
1049	1049
1050	1050	)))
1051	1051
...	...	@@ -1099,6 +1099,7 @@
1099	1099	* **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1100	1100	* **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1101	1101
	1219	+
1102	1102	== 7.23 Set Packet Receiving Response Level ==
1103	1103
1104	1104
...	...	@@ -1138,6 +1138,7 @@
1138	1138	* **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1139	1139	* **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1140	1140
	1259	+
1141	1141	== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1142	1142
1143	1143
...	...	@@ -1168,16 +1168,12 @@
1168	1168	* Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1169	1169	* Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1170	1170
	1290	+
1171	1171	== 7.25 Device offline rejoining （LWS007) ==
1172	1172
1173	1173
1174	1174	(% style="color:blue" %)**AT Command: AT+DDETECT**
1175	1175
1176		-AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
1177		-
1178		-* ACK_Timout_1: Unit: min
1179		-* ACK_Timout_2: Unit: min
1180		-
1181	1181	(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1182	1182	|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1183	1183	|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
...	...	@@ -1209,18 +1209,15 @@
1209	1209	OK
1210	1210	)))
1211	1211
1212		-(% style="color:blue" %)**Downlink Command: 0x32**
	1327	+(% style="color:blue" %)**Downlink Command: 0x33**
1213	1213
1214	1214	Format: Command Code (0x32) followed by 2 bytes mode value.
1215	1215
1216		-If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
	1331	+If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1217	1217
1218		-* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1219		-** 0x01 : Flag
1220		-** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1221		-** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
1222		-** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
	1333	+* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1223	1223
	1335	+
1224	1224	== 7.26 Request the server to send an ACK ==
1225	1225
1226	1226
...	...	@@ -1246,13 +1246,13 @@
1246	1246	(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1247	1247	|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1248	1248	|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1249		-|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
	1361	+|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1250	1250	OK
1251	1251
1252		-the interval is 30 min
	1364	+the interval is 30000ms = 30s
1253	1253	)))
1254		-|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1255		-Set the ReJoin data transmission interval to 60 min
	1366	+|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
	1367	+Set the ReJoin data transmission interval to 60000ms = 60 seconds
1256	1256	)))
1257	1257
1258	1258	(% style="color:blue" %)**Downlink Command: 0x26**
...	...	@@ -1264,14 +1264,17 @@
1264	1264	* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1265	1265	* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1266	1266
	1379	+
1267	1267	= 8. AT Commands Combination =
1268	1268
	1382	+
1269	1269	== 8.1 Set a fix RX2DR for downlink window ==
1270	1270
1271	1271
1272		-* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1273		-* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
	1386	+* **AT+ADR=0             ** **~-~->**  Disable ADR first
	1387	+* **AT+RX2DR=xxxx**  **~-~->**  Set xxxx to your wanted DataRate
1274	1274
	1389	+
1275	1275	== 8.2 Use Downlink Command to set a fix uplink DR ==
1276	1276
1277	1277