Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -9,25 +9,26 @@
9	9
10	10	Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11	11
12		-* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13		-* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
	12	+* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
	13	+* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
14	14
15	15	(((
16	16	**This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
	17	+
17	17	)))
18	18
19		-
20	20	= 2. How to use AT Commands or Downlink command =
21	21
22	22
23		-* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24		-* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
	23	+* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
	24	+* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
25	25	** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26		-** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
	26	+** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
27	27	** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
28	28
29		-(% style="display:none" %) (%%)
30	30
	30	+
	31	+
31	31	= 3. Support End Node and firmware version =
32	32
33	33
...	...	@@ -102,10 +102,12 @@
102	102	)))
103	103	)))
104	104
105		-(% style="display:none" %) (%%)
106	106
	107	+
	108	+
107	107	= 4. System Management Commands =
108	108
	111	+
109	109	== 4.1 Change Uplink Interval ==
110	110
111	111
...	...	@@ -135,14 +135,15 @@
135	135	)))
136	136
137	137	(((
138		-If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
	141	+If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
139	139	)))
140	140
141		-* **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
142		-* **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
	144	+* **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
	145	+* **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
143	143
144		-(% style="display:none" %) (%%)
145	145
	148	+
	149	+
146	146	== 4.2 Reboot End Node ==
147	147
148	148
...	...	@@ -151,10 +151,10 @@
151	151
152	152	(% style="color:blue" %)**AT Command: ATZ**
153	153
154		-(% border="1" style="background-color:#ffffcc; color:green; width:546px" %)
155		-|=(% colspan="3" style="width: 543px;" %)ATZ: Trig a reset of the MCU
156		-|(% style="width:157px" %)**Command Example**|(% style="width:92px" %)**Function**|(% style="width:294px" %)**Response**
157		-|(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
	158	+(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
	159	+|=(% colspan="3" %)ATZ: Trig a reset of the MCU
	160	+|**Command Example**|**Function**|**Response**
	161	+|ATZ|Reset MCU|(((
158	158	Device reset and show booting info
159	159
160	160	LSN50 Device/LoRa ST Module
...	...	@@ -175,10 +175,11 @@
175	175	)))
176	176
177	177	(((
178		-If the downlink payload=**04FF**, the end node will reboot.
	182	+If the downlink payload=**04FF**, the end node will reboot.
	183	+
	184	+
179	179	)))
180	180
181		-
182	182	== 4.3 Reset to factory Default ==
183	183
184	184
...	...	@@ -187,10 +187,10 @@
187	187
188	188	(% style="color:blue" %)**AT Command: AT+FDR**
189	189
190		-(% border="1" style="background-color:#ffffcc; color:green; width:789px" %)
191		-|=(% colspan="3" style="width: 786px;" %)Reset to factory default
192		-|(% style="width:154px" %)**Command Example**|(% style="width:175px" %)**Function**|(% style="width:456px" %)**Response**
193		-|(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
	195	+(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
	196	+|=(% colspan="3" style="width: 828px;" %)Reset to factory default
	197	+|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
	198	+|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
194	194	Device reset to factory default parameters and show booting info
195	195
196	196	LSN50 Device/LoRa ST Module
...	...	@@ -223,10 +223,10 @@
223	223
224	224	(% style="color:blue" %)**AT Command: AT+VER**
225	225
226		-(% border="1" style="background-color:#ffffcc; color:green; width:542px" %)
227		-|=(% colspan="3" style="width: 539px;" %)AT+VER: Image Version and Frequency Band
228		-|(% style="width:157px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:86px" %)**Response**
229		-|(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
	231	+(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
	232	+|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
	233	+|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
	234	+|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
230	230	1.3 EU868
231	231
232	232	OK
...	...	@@ -245,6 +245,7 @@
245	245	(((
246	246
247	247
	253	+
248	248	**xx: Software Type:**
249	249	)))
250	250
...	...	@@ -291,17 +291,23 @@
291	291	|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
292	292	|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
293	293	AT+DEUI = XX XX XX XX XX XX XX XX
	300	+
294	294	AT+DADDR=XXXXXXXX
	302	+
295	295	……….
	304	+
296	296	AT+RX2WTO=X
	306	+
297	297	AT+CHS=868100000
	308	+
298	298	OK
299	299	)))
300	300
301		-(% style="display:none" %) (%%)
302	302
	313	+
303	303	= 5. Keys, IDs and EUIs management =
304	304
	316	+
305	305	== 5.1 Application EUI ==
306	306
307	307
...	...	@@ -318,8 +318,8 @@
318	318	)))
319	319	|(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
320	320
321		-(% style="display:none" %) (%%)
322	322
	334	+
323	323	== 5.2 Application Key ==
324	324
325	325
...	...	@@ -336,8 +336,8 @@
336	336	)))
337	337	|(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
338	338
339		-(% style="display:none" %) (%%)
340	340
	352	+
341	341	== 5.3 Application Session Key ==
342	342
343	343
...	...	@@ -356,8 +356,8 @@
356	356	OK
357	357	)))
358	358
359		-(% style="display:none" %) (%%)
360	360
	372	+
361	361	== 5.4 Device Address ==
362	362
363	363
...	...	@@ -376,8 +376,8 @@
376	376	)))
377	377	|(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
378	378
379		-(% style="display:none" %) (%%)
380	380
	392	+
381	381	== 5.5 Device EUI ==
382	382
383	383
...	...	@@ -396,8 +396,8 @@
396	396	OK
397	397	)))
398	398
399		-(% style="display:none" %) (%%)
400	400
	412	+
401	401	== 5.6 Network ID ==
402	402
403	403
...	...	@@ -414,8 +414,8 @@
414	414	)))
415	415	|(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
416	416
417		-(% style="display:none" %) (%%)
418	418
	430	+
419	419	== 5.7 Network Session Key ==
420	420
421	421
...	...	@@ -432,12 +432,14 @@
432	432	)))
433	433	|(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
434	434
435		-(% style="display:none" %) (%%)
436	436
	448	+
437	437	= 6. Joining and sending date on LoRaWAN network =
438	438
	451	+
439	439	== 6.1 Confirm Mode ==
440	440
	454	+
441	441	=== 6.1.1  AT+CFM command before DR-LWS007 software stack ===
442	442
443	443
...	...	@@ -461,11 +461,12 @@
461	461
462	462	If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
463	463
464		-* **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
465		-* **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
	478	+* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
	479	+* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
466	466
467		-(% style="display:none" %) (%%)
468	468
	482	+
	483	+
469	469	=== 6.1.2  AT+CFM command since DR-LWS007 software stack ===
470	470
471	471
...	...	@@ -508,11 +508,12 @@
508	508
509	509	If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
510	510
511		-* **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
512		-* **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
	526	+* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
	527	+* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
513	513
514		-(% style="display:none" %) (%%)
515	515
	530	+
	531	+
516	516	== 6.2 Confirm Status ==
517	517
518	518
...	...	@@ -521,15 +521,15 @@
521	521
522	522	(% style="color:blue" %)**AT Command: AT+CFS**
523	523
524		-(% border="1" style="background-color:#ffffcc; color:green; width:463px" %)
525		-|=(% colspan="3" style="width: 460px;" %)AT+CFS
526		-|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:107px" %)**Response**
527		-|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
	540	+(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
	541	+|=(% colspan="3" style="width: 531px;" %)AT+CFS
	542	+|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
	543	+|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
528	528	OK
529	529	)))
530	530
531		-(% style="display:none" %) (%%)
532	532
	548	+
533	533	== 6.3 Join LoRa® Network ==
534	534
535	535
...	...	@@ -543,11 +543,12 @@
543	543	|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
544	544	|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
545	545	OK
	562	+
546	546	While Error in format, return AT_BUSY_ERROR
547	547	)))
548	548
549		-(% style="display:none" %) (%%)
550	550
	567	+
551	551	== 6.4 LoRa® Network Join Mode ==
552	552
553	553
...	...	@@ -571,11 +571,12 @@
571	571
572	572	If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
573	573
574		-* **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
575		-* **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
	591	+* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
	592	+* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
576	576
577		-(% style="display:none" %) (%%)
578	578
	595	+
	596	+
579	579	== 6.5 LoRa® Network Join Status ==
580	580
581	581
...	...	@@ -591,8 +591,8 @@
591	591	OK
592	592	)))
593	593
594		-(% style="display:none" %) (%%)
595	595
	613	+
596	596	== 6.6 Print Last Received Data in Raw Format ==
597	597
598	598
...	...	@@ -608,8 +608,8 @@
608	608	OK
609	609	)))
610	610
611		-(% style="display:none" %) (%%)
612	612
	630	+
613	613	== 6.7 Print Last Received Data in Binary Format ==
614	614
615	615
...	...	@@ -625,8 +625,8 @@
625	625	OK
626	626	)))
627	627
628		-(% style="display:none" %) (%%)
629	629
	647	+
630	630	== 6.8 Send Text Data ==
631	631
632	632
...	...	@@ -640,11 +640,14 @@
640	640	|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
641	641	|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
642	642	While Error in format, return
	661	+
643	643	AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
	663	+
	664	+
644	644	)))
645	645
646		-(% style="display:none" %) (%%)
647	647
	668	+
648	648	== 6.9 Send Hexadecimal Data ==
649	649
650	650
...	...	@@ -653,18 +653,21 @@
653	653
654	654	(% style="color:blue" %)**AT Command: AT+SENDB**
655	655
656		-(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
657		-|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
658		-|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
659		-|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
660		-|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
661		-AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
	677	+(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
	678	+|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
	679	+|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
	680	+|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
	681	+|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
	682	+AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
	683	+
	684	+
662	662	)))
663	663
664		-(% style="display:none" %) (%%)
665	665
	688	+
666	666	= 7. LoRaWAN network management =
667	667
	691	+
668	668	== 7.1 Adaptive Data Rate ==
669	669
670	670
...	...	@@ -684,15 +684,17 @@
684	684	AT_PARAM_ERROR
685	685	)))
686	686
	711	+
687	687	(% style="color:blue" %)**Downlink Command: 0x22**
688	688
689	689	If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
690	690
691		-* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
692		-* **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
	716	+* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
	717	+* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
693	693
694		-(% style="display:none" %) (%%)
695	695
	720	+
	721	+
696	696	== 7.2 LoRa® Class ==
697	697
698	698
...	...	@@ -699,7 +699,7 @@
699	699	Feature: Get or Set the Device Class(Currently only support class A, class C).
700	700
701	701
702		-(% style="color:blue" %)**AT Command:  AT+CLASS**
	728	+(% style="color:blue" %)**AT Command:AT+CLASS**
703	703
704	704	(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
705	705	|=(% colspan="3" style="width: 504px;" %)AT+CLASS
...	...	@@ -711,15 +711,15 @@
711	711
712	712	)))
713	713
714		-(% style="display:none" %) (%%)
715	715
	741	+
716	716	== 7.3 Duty Cycle Setting ==
717	717
718	718
719		-Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
	745	+Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
720	720
721	721
722		-(% style="color:blue" %)**AT Command:  AT+DCS**
	748	+(% style="color:blue" %)**AT Command:AT+DCS**
723	723
724	724	(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
725	725	|=(% colspan="3" style="width: 512px;" %)AT+DCS
...	...	@@ -731,19 +731,14 @@
731	731
732	732	)))
733	733
734		-(% style="display:none" %) (%%)
735	735
	761	+
736	736	== 7.4 Data Rate ==
737	737
738	738
739		-Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
	765	+Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
740	740
741		-(% style="color:red" %)
742		-**Notice:**
743	743
744		-* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
745		-* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
746		-
747	747	(% style="color:blue" %)**AT Command: AT+DR**
748	748
749	749	(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
...	...	@@ -756,15 +756,17 @@
756	756
757	757	)))
758	758
	780	+
759	759	(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
760	760
761	761	If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
762	762
763		-* **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
764		-* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
	785	+* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
	786	+* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
765	765
766		-(% style="display:none" %) (%%)
767	767
	789	+
	790	+
768	768	== 7.5 Frame Counter Downlink ==
769	769
770	770
...	...	@@ -771,7 +771,7 @@
771	771	Feature: Get or Set the Frame Counter Downlink.
772	772
773	773
774		-(% style="color:blue" %)**AT Command:  AT+FCD**
	797	+(% style="color:blue" %)**AT Command:AT+FCD**
775	775
776	776	(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
777	777	|=(% colspan="3" style="width: 690px;" %)AT+FCD
...	...	@@ -783,14 +783,14 @@
783	783	OK
784	784	)))
785	785
786		-(% style="display:none" %) (%%)
787	787
	810	+
788	788	== 7.6 Frame Counter Uplink ==
789	789
790	790	Feature: Get or Set the Frame Counter Uplink.
791	791
792	792
793		-(% style="color:blue" %)**AT Command:  AT+FCU**
	816	+(% style="color:blue" %)**AT Command:AT+FCU**
794	794
795	795	(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
796	796	|=(% colspan="3" style="width: 531px;" %)AT+FCU
...	...	@@ -802,8 +802,8 @@
802	802
803	803	)))
804	804
805		-(% style="display:none" %) (%%)
806	806
	829	+
807	807	== 7.7 Join Accept Delay1 ==
808	808
809	809
...	...	@@ -810,7 +810,7 @@
810	810	Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
811	811
812	812
813		-(% style="color:blue" %)**AT Command:  AT+JN1DL**
	836	+(% style="color:blue" %)**AT Command:AT+JN1DL**
814	814
815	815	(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
816	816	|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
...	...	@@ -822,15 +822,14 @@
822	822
823	823	)))
824	824
825		-(% style="display:none" %) (%%)
826	826
	849	+
827	827	== 7.8 Join Accept Delay2 ==
828	828
829		-
830	830	Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
831	831
832	832
833		-(% style="color:blue" %)**AT Command:  AT+JN2DL**
	855	+(% style="color:blue" %)**AT Command:AT+JN2DL**
834	834
835	835	(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
836	836	|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
...	...	@@ -842,17 +842,17 @@
842	842
843	843	)))
844	844
845		-(% style="display:none" %) (%%)
846	846
	868	+
847	847	== 7.9 Public Network Mode ==
848	848
849	849
850	850	Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
851	851
852		-(% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
	874	+(% style="color:red" %)Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
853	853
854	854
855		-(% style="color:blue" %)**AT Command:  AT+PNM**
	877	+(% style="color:blue" %)**AT Command:AT+PNM**
856	856
857	857	(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
858	858	|=(% colspan="3" style="width: 664px;" %)AT+PNM
...	...	@@ -871,8 +871,8 @@
871	871	)))
872	872	|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
873	873
874		-(% style="display:none" %) (%%)
875	875
	897	+
876	876	== 7.10 Receive Delay1 ==
877	877
878	878
...	...	@@ -879,7 +879,7 @@
879	879	Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
880	880
881	881
882		-(% style="color:blue" %)**AT Command: AT+RX1DL**
	904	+(% style="color:blue" %)**AT Command:AT+RX1DL**
883	883
884	884	(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
885	885	|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
...	...	@@ -891,8 +891,8 @@
891	891
892	892	)))
893	893
894		-(% style="display:none" %) (%%)
895	895
	917	+
896	896	== 7.11 Receive Delay2 ==
897	897
898	898
...	...	@@ -899,7 +899,7 @@
899	899	Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
900	900
901	901
902		-(% style="color:blue" %)**AT Command: AT+RX2DL**
	924	+(% style="color:blue" %)**AT Command:AT+RX2DL**
903	903
904	904	(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
905	905	|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
...	...	@@ -911,8 +911,8 @@
911	911
912	912	)))
913	913
914		-(% style="display:none" %) (%%)
915	915
	937	+
916	916	== 7.12 Rx2 Window Data Rate ==
917	917
918	918
...	...	@@ -919,7 +919,7 @@
919	919	Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
920	920
921	921
922		-(% style="color:blue" %)**AT Command:  AT+RX2DR**
	944	+(% style="color:blue" %)**AT Command:AT+RX2DR**
923	923
924	924	(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
925	925	|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
...	...	@@ -931,8 +931,8 @@
931	931
932	932	)))
933	933
934		-(% style="display:none" %) (%%)
935	935
	957	+
936	936	== 7.13 Rx2 Window Frequency ==
937	937
938	938
...	...	@@ -939,7 +939,7 @@
939	939	Feature: Get or Set the Rx2 window frequency
940	940
941	941
942		-(% style="color:blue" %)**AT Command:  AT+RX2FQ**
	964	+(% style="color:blue" %)**AT Command:AT+RX2FQ**
943	943
944	944	(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
945	945	|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
...	...	@@ -951,18 +951,16 @@
951	951
952	952	)))
953	953
954		-(% style="display:none" %) (%%)
955	955
	977	+
956	956	== 7.14 Transmit Power ==
957	957
958	958
959	959	Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
960	960
961		-(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
962	962
	984	+(% style="color:blue" %)**AT Command:AT+TXP**
963	963
964		-(% style="color:blue" %)**AT Command:  AT+TXP**
965		-
966	966	(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
967	967	|=(% colspan="3" style="width: 462px;" %)AT+TXP
968	968	|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
...	...	@@ -973,15 +973,17 @@
973	973
974	974	)))
975	975
	996	+
976	976	Downlink Payload. The 4th byte of 0x22 downlink.
977	977
978	978	If the downlink payload=22000100, it means setting the TXP to 0.
979	979
980		-* **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
981		-* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+TXP=0.
	1001	+* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
	1002	+* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
982	982
983		-(% style="display:none" %) (%%)
984	984
	1005	+
	1006	+
985	985	== 7.15 RSSI of the Last Received Packet ==
986	986
987	987
...	...	@@ -997,8 +997,8 @@
997	997	OK
998	998	)))
999	999
1000		-(% style="display:none" %) (%%)
1001	1001
	1023	+
1002	1002	== 7.16 SNR of the Last Received Packet ==
1003	1003
1004	1004
...	...	@@ -1005,7 +1005,7 @@
1005	1005	Feature: Get the SNR of the last received packet
1006	1006
1007	1007
1008		-(% style="color:blue" %)**AT Command:  AT+SNR**
	1030	+(% style="color:blue" %)**AT Command:AT+SNR**
1009	1009
1010	1010	(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
1011	1011	|=(% colspan="3" style="width: 568px;" %)AT+SNR
...	...	@@ -1014,8 +1014,8 @@
1014	1014	OK
1015	1015	)))
1016	1016
1017		-(% style="display:none" %) (%%)
1018	1018
	1040	+
1019	1019	== 7.17 Application Port ==
1020	1020
1021	1021
...	...	@@ -1032,6 +1032,7 @@
1032	1032	)))
1033	1033	|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
1034	1034
	1057	+
1035	1035	(% style="color:blue" %)**Downlink Command: 0x23**
1036	1036
1037	1037	Format: Command Code (0x23) followed by 1 bytes port value.
...	...	@@ -1038,11 +1038,11 @@
1038	1038
1039	1039	If the downlink payload=2301, it means set the application port to 1, while type code is 23.
1040	1040
1041		-* **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1042		-* **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
	1064	+* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
	1065	+* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
1043	1043
1044		-(% style="display:none" %) (%%)
1045	1045
	1068	+
1046	1046	== 7.18 Single Channel Mode ==
1047	1047
1048	1048
...	...	@@ -1059,11 +1059,10 @@
1059	1059	)))
1060	1060	|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
1061	1061
1062		-(% style="display:none" %) (%%)
1063	1063
	1086	+
1064	1064	== 7.19 Eight Channel Mode ==
1065	1065
1066		-
1067	1067	Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1068	1068
1069	1069
...	...	@@ -1079,17 +1079,19 @@
1079	1079	)))
1080	1080	|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1081	1081
1082		-(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
1083	1083
	1105	+(% style="color:blue" %)**Downlink Command: 0x24**
	1106	+
1084	1084	Format: Command Code (0x24) followed by 1 bytes channel value.
1085	1085
1086	1086	If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1087	1087
1088		-* **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1089		-* **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
	1111	+* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
	1112	+* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
1090	1090
1091		-(% style="display:none" %) (%%)
1092	1092
	1115	+
	1116	+
1093	1093	== 7.20 Get or Set RXwindows1 timeout ==
1094	1094
1095	1095
...	...	@@ -1106,19 +1106,23 @@
1106	1106	)))
1107	1107	|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1108	1108
1109		-(% style="display:none" %) (%%)
1110		-
1111	1111	(((
1112		-(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
	1134	+
	1135	+
	1136	+**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
	1137	+
	1138	+
1113	1113	)))
1114	1114
1115	1115	[[image:image-20220526162535-1.png]]
1116	1116
	1143	+
1117	1117	(((
1118	1118	Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
	1146	+
	1147	+
1119	1119	)))
1120	1120
1121		-
1122	1122	== 7.21 Get or Set RXwindows2 timeout ==
1123	1123
1124	1124
...	...	@@ -1135,8 +1135,8 @@
1135	1135	)))
1136	1136	|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1137	1137
1138		-(% style="display:none" %) (%%)
1139	1139
	1167	+
1140	1140	== 7.22 Setting up uplinkdwelltime (as923, au915) ==
1141	1141
1142	1142
...	...	@@ -1153,6 +1153,7 @@
1153	1153	)))
1154	1154	|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
1155	1155
	1184	+
1156	1156	(% style="color:blue" %)**Downlink Command: 0x25**
1157	1157
1158	1158	Format: Command Code (0x25) followed by 1 bytes state value.
...	...	@@ -1159,11 +1159,12 @@
1159	1159
1160	1160	If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1161	1161
1162		-* **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1163		-* **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
	1191	+* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
	1192	+* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1164	1164
1165		-(% style="display:none" %) (%%)
1166	1166
	1195	+
	1196	+
1167	1167	== 7.23 Set Packet Receiving Response Level ==
1168	1168
1169	1169
...	...	@@ -1178,6 +1178,7 @@
1178	1178	* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1179	1179	* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1180	1180
	1211	+
1181	1181	**Case Analyes:**
1182	1182
1183	1183	* For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
...	...	@@ -1184,6 +1184,7 @@
1184	1184	* For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1185	1185	* For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1186	1186
	1218	+
1187	1187	(% style="color:blue" %)**AT Command: AT+RPL**
1188	1188
1189	1189	(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
...	...	@@ -1194,6 +1194,7 @@
1194	1194	)))
1195	1195	|(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
1196	1196
	1229	+
1197	1197	(% style="color:blue" %)**Downlink Command: 0x21**
1198	1198
1199	1199	Format: Command Code (0x21) followed by 1 bytes level value.
...	...	@@ -1200,32 +1200,30 @@
1200	1200
1201	1201	If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1202	1202
1203		-* **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1204		-* **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
	1236	+* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
	1237	+* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1205	1205
1206		-(% style="display:none" %) (%%)
1207	1207
	1240	+
	1241	+
1208	1208	== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1209	1209
1210	1210
1211	1211	(% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1212	1212
1213		-(% border="1" style="background-color:#ffffcc; color:green; width:589px" %)
1214		-|=(% colspan="3" style="width: 586px;" %)AT+**SETMAXNBTRANS**
1215		-|(% style="width:227px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:87px" %)**Response**
1216		-|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
	1247	+(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
	1248	+|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
	1249	+|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
	1250	+|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1217	1217	OK
1218	1218	)))
1219		-|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1220		-value2: 0: uplink fcnt doesn't change for each NBTrans;
1221		-
1222		-1: uplink fcnt increase by 1 for each NBTrans.
1223		-)))|(% style="width:87px" %)(((
	1253	+|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1224	1224	1
1225	1225
1226	1226	OK
1227	1227	)))
1228	1228
	1259	+
1229	1229	(% style="color:blue" %)**Downlink Command: 0x33**
1230	1230
1231	1231	Format: Command Code (0x33) followed by 2 bytes mode value.
...	...	@@ -1232,21 +1232,16 @@
1232	1232
1233	1233	If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1234	1234
1235		-* Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1236		-* Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
	1266	+* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
	1267	+* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1237	1237
1238		-(% style="display:none" %) (%%)
1239	1239
	1270	+
1240	1240	== 7.25 Device offline rejoining （LWS007) ==
1241	1241
1242	1242
1243	1243	(% style="color:blue" %)**AT Command: AT+DDETECT**
1244	1244
1245		-AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
1246		-
1247		-* ACK_Timout_1: Unit: min
1248		-* ACK_Timout_2: Unit: min
1249		-
1250	1250	(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1251	1251	|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1252	1252	|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
...	...	@@ -1278,20 +1278,17 @@
1278	1278	OK
1279	1279	)))
1280	1280
1281		-(% style="color:blue" %)**Downlink Command: 0x32**
1282	1282
	1308	+(% style="color:blue" %)**Downlink Command: 0x33**
	1309	+
1283	1283	Format: Command Code (0x32) followed by 2 bytes mode value.
1284	1284
1285		-If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
	1312	+If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1286	1286
1287		-* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1288		-** 0x01 : Flag
1289		-** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1290		-** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
1291		-** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
	1314	+* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1292	1292
1293		-(% style="display:none" %) (%%)
1294	1294
	1317	+
1295	1295	== 7.26 Request the server to send an ACK ==
1296	1296
1297	1297
...	...	@@ -1305,11 +1305,12 @@
1305	1305	)))
1306	1306	|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1307	1307	0
	1331	+
1308	1308	OK
1309	1309	)))
1310	1310
1311		-(% style="display:none" %) (%%)
1312	1312
	1336	+
1313	1313	== 7.27 Adjust network rejoining interval ==
1314	1314
1315	1315
...	...	@@ -1318,15 +1318,16 @@
1318	1318	(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1319	1319	|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1320	1320	|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1321		-|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
	1345	+|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1322	1322	OK
1323	1323
1324		-the interval is 30 min
	1348	+the interval is 30000ms = 30s
1325	1325	)))
1326		-|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1327		-Set the ReJoin data transmission interval to 60 min
	1350	+|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
	1351	+Set the ReJoin data transmission interval to 60000ms = 60 seconds
1328	1328	)))
1329	1329
	1354	+
1330	1330	(% style="color:blue" %)**Downlink Command: 0x26**
1331	1331
1332	1332	Format: Command Code (0x26) followed by 2 bytes mode value.
...	...	@@ -1333,21 +1333,21 @@
1333	1333
1334	1334	If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1335	1335
1336		-* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1337		-* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
	1361	+* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
	1362	+* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1338	1338
1339		-(% style="display:none" %) (%%)
1340	1340
	1365	+
1341	1341	= 8. AT Commands Combination =
1342	1342
	1368	+
1343	1343	== 8.1 Set a fix RX2DR for downlink window ==
1344	1344
1345	1345
1346		-* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
	1372	+* **AT+ADR=0             ** **~-~->**  Disable ADR first
	1373	+* **AT+RX2DR=xxxx**  **~-~->**  Set xxxx to your wanted DataRate
1347	1347
1348		-* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1349	1349
1350		-(% style="display:none" %) (%%)
1351	1351
1352	1352	== 8.2 Use Downlink Command to set a fix uplink DR ==
1353	1353
...	...	@@ -1356,10 +1356,6 @@
1356	1356
1357	1357	**Same as:**
1358	1358
1359		-* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1360		-
1361		-* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1362		-
1363		-* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1364		-
1365		-
	1384	+* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
	1385	+* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
	1386	+* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]