Last modified by kai on 2024/09/06 10:00
<
From version < 60.11 >
edited by Xiaoling
on 2023/03/27 14:10
To version < 50.15 >
edited by Xiaoling
on 2022/07/13 13:41
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -9,25 +9,25 @@
9 9  
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 -* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 -* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
12 +* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
13 +* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 15  (((
16 16  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17 +
17 17  )))
18 18  
19 -
20 20  = 2. How to use AT Commands or Downlink command =
21 21  
22 22  
23 -* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 -* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
23 +* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 +* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
25 25  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
27 27  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
28 28  
29 -(% style="display:none" %) (%%)
30 30  
30 +
31 31  = 3. Support End Node and firmware version =
32 32  
33 33  
... ... @@ -102,10 +102,10 @@
102 102  )))
103 103  )))
104 104  
105 -(% style="display:none" %) (%%)
106 106  
107 107  = 4. System Management Commands =
108 108  
108 +
109 109  == 4.1 Change Uplink Interval ==
110 110  
111 111  
... ... @@ -135,14 +135,14 @@
135 135  )))
136 136  
137 137  (((
138 -If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
138 +If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
139 139  )))
140 140  
141 -* **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
142 -* **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
141 +* **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
142 +* **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
143 143  
144 -(% style="display:none" %) (%%)
145 145  
145 +
146 146  == 4.2 Reboot End Node ==
147 147  
148 148  
... ... @@ -151,10 +151,10 @@
151 151  
152 152  (% style="color:blue" %)**AT Command: ATZ**
153 153  
154 -(% border="1" style="background-color:#ffffcc; color:green; width:546px" %)
155 -|=(% colspan="3" style="width: 543px;" %)ATZ: Trig a reset of the MCU
156 -|(% style="width:157px" %)**Command Example**|(% style="width:92px" %)**Function**|(% style="width:294px" %)**Response**
157 -|(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
154 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
155 +|=(% colspan="3" %)ATZ: Trig a reset of the MCU
156 +|**Command Example**|**Function**|**Response**
157 +|ATZ|Reset MCU|(((
158 158  Device reset and show booting info
159 159  
160 160  LSN50 Device/LoRa ST Module
... ... @@ -168,6 +168,7 @@
168 168  <followed by the Tx and Rx information>
169 169  )))
170 170  
171 +
171 171  (% style="color:blue" %)**Downlink Command: 0x04**
172 172  
173 173  (((
... ... @@ -175,10 +175,11 @@
175 175  )))
176 176  
177 177  (((
178 -If the downlink payload=**04FF**, the end node will reboot.
179 +If the downlink payload=**04FF**, the end node will reboot.
180 +
181 +
179 179  )))
180 180  
181 -
182 182  == 4.3 Reset to factory Default ==
183 183  
184 184  
... ... @@ -187,10 +187,10 @@
187 187  
188 188  (% style="color:blue" %)**AT Command: AT+FDR**
189 189  
190 -(% border="1" style="background-color:#ffffcc; color:green; width:789px" %)
191 -|=(% colspan="3" style="width: 786px;" %)Reset to factory default
192 -|(% style="width:154px" %)**Command Example**|(% style="width:175px" %)**Function**|(% style="width:456px" %)**Response**
193 -|(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
192 +(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
193 +|=(% colspan="3" style="width: 828px;" %)Reset to factory default
194 +|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
195 +|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
194 194  Device reset to factory default parameters and show booting info
195 195  
196 196  LSN50 Device/LoRa ST Module
... ... @@ -204,6 +204,7 @@
204 204  Please set the parameters or reset Device to apply change
205 205  )))
206 206  
209 +
207 207  (% style="color:blue" %)**Downlink Command: 0x04**
208 208  
209 209  (((
... ... @@ -223,15 +223,16 @@
223 223  
224 224  (% style="color:blue" %)**AT Command: AT+VER**
225 225  
226 -(% border="1" style="background-color:#ffffcc; color:green; width:542px" %)
227 -|=(% colspan="3" style="width: 539px;" %)AT+VER: Image Version and Frequency Band
228 -|(% style="width:157px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:86px" %)**Response**
229 -|(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
229 +(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
230 +|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
231 +|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
232 +|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
230 230  1.3 EU868
231 231  
232 232  OK
233 233  )))
234 234  
238 +
235 235  (% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
236 236  
237 237  (((
... ... @@ -245,6 +245,7 @@
245 245  (((
246 246  
247 247  
252 +
248 248  **xx: Software Type:**
249 249  )))
250 250  
... ... @@ -255,6 +255,7 @@
255 255  (((
256 256  
257 257  
263 +
258 258  **yy: Frequency Band:**
259 259  )))
260 260  
... ... @@ -272,6 +272,7 @@
272 272  (((
273 273  
274 274  
281 +
275 275  **zz: Subband**
276 276  )))
277 277  
... ... @@ -291,17 +291,23 @@
291 291  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
292 292  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
293 293  AT+DEUI = XX XX XX XX XX XX XX XX
301 +
294 294  AT+DADDR=XXXXXXXX
303 +
295 295  ……….
305 +
296 296  AT+RX2WTO=X
307 +
297 297  AT+CHS=868100000
309 +
298 298  OK
299 299  )))
300 300  
301 -(% style="display:none" %) (%%)
302 302  
314 +
303 303  = 5. Keys, IDs and EUIs management =
304 304  
317 +
305 305  == 5.1 Application EUI ==
306 306  
307 307  
... ... @@ -318,8 +318,8 @@
318 318  )))
319 319  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
320 320  
321 -(% style="display:none" %) (%%)
322 322  
335 +
323 323  == 5.2 Application Key ==
324 324  
325 325  
... ... @@ -336,16 +336,16 @@
336 336  )))
337 337  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
338 338  
339 -(% style="display:none" %) (%%)
340 340  
353 +
341 341  == 5.3 Application Session Key ==
342 342  
343 -
344 344  Feature: Get or Set the Application Session Key.
345 345  
346 346  
347 347  (% style="color:blue" %)**AT Command: AT+APPSKEY**
348 348  
361 +
349 349  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
350 350  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
351 351  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -356,16 +356,14 @@
356 356  OK
357 357  )))
358 358  
359 -(% style="display:none" %) (%%)
360 -
361 361  == 5.4 Device Address ==
362 362  
363 -
364 364  Feature: Get or Set the Device Address.
365 365  
366 366  
367 367  (% style="color:blue" %)**AT Command: AT+DADDR**
368 368  
379 +
369 369  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
370 370  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
371 371  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -376,16 +376,14 @@
376 376  )))
377 377  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
378 378  
379 -(% style="display:none" %) (%%)
380 -
381 381  == 5.5 Device EUI ==
382 382  
383 -
384 384  Feature: Get or Set the Device EUI.
385 385  
386 386  
387 387  (% style="color:blue" %)**AT Command: AT+DEUI**
388 388  
397 +
389 389  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
390 390  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
391 391  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -396,16 +396,14 @@
396 396  OK
397 397  )))
398 398  
399 -(% style="display:none" %) (%%)
400 -
401 401  == 5.6 Network ID ==
402 402  
403 -
404 404  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
405 405  
406 406  
407 407  (% style="color:blue" %)**AT Command: AT+NWKID**
408 408  
415 +
409 409  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
410 410  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
411 411  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -414,16 +414,14 @@
414 414  )))
415 415  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
416 416  
417 -(% style="display:none" %) (%%)
418 -
419 419  == 5.7 Network Session Key ==
420 420  
421 -
422 422  Feature: Get or Set the Network Session Key
423 423  
424 424  
425 425  (% style="color:blue" %)**AT Command: AT+NWKSKEY**
426 426  
431 +
427 427  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
428 428  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
429 429  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -432,20 +432,18 @@
432 432  )))
433 433  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
434 434  
435 -(% style="display:none" %) (%%)
436 -
437 437  = 6. Joining and sending date on LoRaWAN network =
438 438  
439 439  == 6.1 Confirm Mode ==
440 440  
441 -=== 6.1.1  AT+CFM command before DR-LWS007 software stack ===
444 +=== AT+CFM command before DR-LWS007 software stack ===
442 442  
443 -
444 444  Feature: Get or Set the confirmation mode (0-1).
445 445  
446 446  
447 447  (% style="color:blue" %)**AT Command: AT+CFM**
448 448  
451 +
449 449  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
450 450  |=(% colspan="3" style="width: 707px;" %)AT+CFM
451 451  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -461,16 +461,15 @@
461 461  
462 462  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
463 463  
464 -* **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
465 -* **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
467 +* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
468 +* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
466 466  
467 -(% style="display:none" %) (%%)
470 +=== AT+CFM command since DR-LWS007 software stack ===
468 468  
469 -=== 6.1.2  AT+CFM command since DR-LWS007 software stack ===
470 470  
471 -
472 472  (% style="color:blue" %)**AT Command: AT+CFM**
473 473  
475 +
474 474  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
475 475  |=(% colspan="3" style="width: 707px;" %)AT+CFM
476 476  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -504,58 +504,54 @@
504 504  
505 505  (% style="color:blue" %)**Downlink Command: 0x05**
506 506  
509 +
507 507  Format: Command Code (0x05) followed by 2 bytes mode value.
508 508  
509 509  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
510 510  
511 -* **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
512 -* **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
514 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
515 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
513 513  
514 -(% style="display:none" %) (%%)
515 -
516 516  == 6.2 Confirm Status ==
517 517  
518 -
519 519  Feature: Get confirmation status of the last AT+SEND (0-1).
520 520  
521 521  
522 522  (% style="color:blue" %)**AT Command: AT+CFS**
523 523  
524 -(% border="1" style="background-color:#ffffcc; color:green; width:463px" %)
525 -|=(% colspan="3" style="width: 460px;" %)AT+CFS
526 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:107px" %)**Response**
527 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
524 +
525 +(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
526 +|=(% colspan="3" style="width: 531px;" %)AT+CFS
527 +|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
528 +|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
528 528  OK
529 529  )))
530 530  
531 -(% style="display:none" %) (%%)
532 -
533 533  == 6.3 Join LoRa® Network ==
534 534  
535 -
536 536  Feature: Join network.
537 537  
538 538  
539 539  (% style="color:blue" %)**AT Command: AT+JOIN**
540 540  
539 +
541 541  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
542 542  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
543 543  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
544 544  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
545 545  OK
545 +
546 546  While Error in format, return AT_BUSY_ERROR
547 547  )))
548 548  
549 -(% style="display:none" %) (%%)
550 -
551 551  == 6.4 LoRa® Network Join Mode ==
552 552  
553 -
554 554  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
555 555  
556 556  
557 557  (% style="color:blue" %)**AT Command: AT+NJM**
558 558  
556 +
559 559  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
560 560  |=(% colspan="3" style="width: 750px;" %)AT+NJM
561 561  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -567,23 +567,22 @@
567 567  
568 568  (% style="color:blue" %)**Downlink Command: 0x20**
569 569  
568 +
570 570  Format: Command Code (0x20) followed by 1 bytes mode value.
571 571  
572 572  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
573 573  
574 -* **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
575 -* **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
573 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
574 +* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
576 576  
577 -(% style="display:none" %) (%%)
578 -
579 579  == 6.5 LoRa® Network Join Status ==
580 580  
581 -
582 582  Feature: LoRa® Network Join Status.
583 583  
584 584  
585 585  (% style="color:blue" %)**AT Command: AT+NJS**
586 586  
583 +
587 587  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
588 588  |=(% colspan="3" style="width: 495px;" %)AT+NJS
589 589  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -591,16 +591,14 @@
591 591  OK
592 592  )))
593 593  
594 -(% style="display:none" %) (%%)
595 -
596 596  == 6.6 Print Last Received Data in Raw Format ==
597 597  
598 -
599 599  Feature: Print Last Received Data in Raw Format<port:data>.
600 600  
601 601  
602 602  (% style="color:blue" %)**AT Command: AT+RECV**
603 603  
598 +
604 604  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
605 605  |=(% colspan="3" style="width: 584px;" %)AT+RECV
606 606  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -608,16 +608,14 @@
608 608  OK
609 609  )))
610 610  
611 -(% style="display:none" %) (%%)
612 -
613 613  == 6.7 Print Last Received Data in Binary Format ==
614 614  
615 -
616 616  Feature: Print Last Received Data in Binary Format<port:data>.
617 617  
618 618  
619 619  (% style="color:blue" %)**AT Command: AT+RECVB**
620 620  
613 +
621 621  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
622 622  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
623 623  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -625,54 +625,53 @@
625 625  OK
626 626  )))
627 627  
628 -(% style="display:none" %) (%%)
629 -
630 630  == 6.8 Send Text Data ==
631 631  
632 -
633 633  Feature: Send Text Data<port:data>.
634 634  
635 635  
636 636  (% style="color:blue" %)**AT Command: AT+SEND**
637 637  
628 +
638 638  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
639 639  |=(% colspan="3" style="width: 988px;" %)AT+SEND
640 640  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
641 641  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
642 642  While Error in format, return
634 +
643 643  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
636 +
637 +
644 644  )))
645 645  
646 -(% style="display:none" %) (%%)
647 -
648 648  == 6.9 Send Hexadecimal Data ==
649 649  
650 -
651 651  Feature: Send hexadecimal data along with the application port.
652 652  
653 653  
654 654  (% style="color:blue" %)**AT Command: AT+SENDB**
655 655  
656 -(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
657 -|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
658 -|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
659 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
660 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
661 -AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
662 -)))
663 663  
664 -(% style="display:none" %) (%%)
648 +(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
649 +|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
650 +|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
651 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
652 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
653 +AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
665 665  
655 +
656 +)))
657 +
666 666  = 7. LoRaWAN network management =
667 667  
668 668  == 7.1 Adaptive Data Rate ==
669 669  
670 -
671 671  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
672 672  
673 673  
674 674  (% style="color:blue" %)**AT Command: AT+ADR**
675 675  
667 +
676 676  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
677 677  |=(% colspan="3" style="width: 680px;" %)AT+ADR
678 678  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -686,21 +686,21 @@
686 686  
687 687  (% style="color:blue" %)**Downlink Command: 0x22**
688 688  
689 -If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
690 690  
691 -* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
692 -* **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
693 693  
694 -(% style="display:none" %) (%%)
683 +If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
695 695  
685 +* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
686 +* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
687 +
696 696  == 7.2 LoRa® Class ==
697 697  
698 -
699 699  Feature: Get or Set the Device Class(Currently only support class A, class C).
700 700  
701 701  
702 -(% style="color:blue" %)**AT Command:  AT+CLASS**
693 +(% style="color:blue" %)**AT Command:AT+CLASS**
703 703  
695 +
704 704  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
705 705  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
706 706  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -711,15 +711,13 @@
711 711  
712 712  )))
713 713  
714 -(% style="display:none" %) (%%)
715 -
716 716  == 7.3 Duty Cycle Setting ==
717 717  
708 +Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
718 718  
719 -Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
720 720  
711 +(% style="color:blue" %)**AT Command:AT+DCS**
721 721  
722 -(% style="color:blue" %)**AT Command:  AT+DCS**
723 723  
724 724  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
725 725  |=(% colspan="3" style="width: 512px;" %)AT+DCS
... ... @@ -731,21 +731,14 @@
731 731  
732 732  )))
733 733  
734 -(% style="display:none" %) (%%)
735 -
736 736  == 7.4 Data Rate ==
737 737  
726 +Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
738 738  
739 -Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
740 740  
741 -(% style="color:red" %)
742 -**Notice:**
743 -
744 -* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
745 -* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
746 -
747 747  (% style="color:blue" %)**AT Command: AT+DR**
748 748  
731 +
749 749  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
750 750  |=(% colspan="3" style="width: 463px;" %)AT+DR
751 751  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -758,21 +758,21 @@
758 758  
759 759  (% style="color:blue" %)**Downlink Command: 0x2200aaFF**
760 760  
761 -If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
762 762  
763 -* **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
764 -* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
765 765  
766 -(% style="display:none" %) (%%)
746 +If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
767 767  
748 +* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
749 +* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
750 +
768 768  == 7.5 Frame Counter Downlink ==
769 769  
770 -
771 771  Feature: Get or Set the Frame Counter Downlink.
772 772  
773 773  
774 -(% style="color:blue" %)**AT Command:  AT+FCD**
756 +(% style="color:blue" %)**AT Command:AT+FCD**
775 775  
758 +
776 776  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
777 777  |=(% colspan="3" style="width: 690px;" %)AT+FCD
778 778  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -781,6 +781,8 @@
781 781  )))
782 782  |(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
783 783  OK
767 +
768 +
784 784  )))
785 785  
786 786  == 7.6 Frame Counter Uplink ==
... ... @@ -788,8 +788,9 @@
788 788  Feature: Get or Set the Frame Counter Uplink.
789 789  
790 790  
791 -(% style="color:blue" %)**AT Command:  AT+FCU**
776 +(% style="color:blue" %)**AT Command:AT+FCU**
792 792  
778 +
793 793  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
794 794  |=(% colspan="3" style="width: 531px;" %)AT+FCU
795 795  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -800,16 +800,14 @@
800 800  
801 801  )))
802 802  
803 -(% style="display:none" %) (%%)
804 -
805 805  == 7.7 Join Accept Delay1 ==
806 806  
807 -
808 808  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
809 809  
810 810  
811 -(% style="color:blue" %)**AT Command:  AT+JN1DL**
794 +(% style="color:blue" %)**AT Command:AT+JN1DL**
812 812  
796 +
813 813  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
814 814  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
815 815  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -820,16 +820,14 @@
820 820  
821 821  )))
822 822  
823 -(% style="display:none" %) (%%)
824 -
825 825  == 7.8 Join Accept Delay2 ==
826 826  
827 -
828 828  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
829 829  
830 830  
831 -(% style="color:blue" %)**AT Command:  AT+JN2DL**
812 +(% style="color:blue" %)**AT Command:AT+JN2DL**
832 832  
814 +
833 833  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
834 834  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
835 835  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -840,18 +840,16 @@
840 840  
841 841  )))
842 842  
843 -(% style="display:none" %) (%%)
844 -
845 845  == 7.9 Public Network Mode ==
846 846  
847 -
848 848  Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
849 849  
850 -(% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
829 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
851 851  
852 852  
853 -(% style="color:blue" %)**AT Command:  AT+PNM**
832 +(% style="color:blue" %)**AT Command:AT+PNM**
854 854  
834 +
855 855  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
856 856  |=(% colspan="3" style="width: 664px;" %)AT+PNM
857 857  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -869,16 +869,14 @@
869 869  )))
870 870  |(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
871 871  
872 -(% style="display:none" %) (%%)
873 -
874 874  == 7.10 Receive Delay1 ==
875 875  
876 -
877 877  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
878 878  
879 879  
880 -(% style="color:blue" %)**AT Command: AT+RX1DL**
857 +(% style="color:blue" %)**AT Command:AT+RX1DL**
881 881  
859 +
882 882  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
883 883  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
884 884  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -889,16 +889,14 @@
889 889  
890 890  )))
891 891  
892 -(% style="display:none" %) (%%)
893 -
894 894  == 7.11 Receive Delay2 ==
895 895  
896 -
897 897  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
898 898  
899 899  
900 -(% style="color:blue" %)**AT Command: AT+RX2DL**
875 +(% style="color:blue" %)**AT Command:AT+RX2DL**
901 901  
877 +
902 902  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
903 903  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
904 904  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -909,16 +909,14 @@
909 909  
910 910  )))
911 911  
912 -(% style="display:none" %) (%%)
913 -
914 914  == 7.12 Rx2 Window Data Rate ==
915 915  
916 -
917 917  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
918 918  
919 919  
920 -(% style="color:blue" %)**AT Command:  AT+RX2DR**
893 +(% style="color:blue" %)**AT Command:AT+RX2DR**
921 921  
895 +
922 922  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
923 923  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
924 924  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -929,16 +929,14 @@
929 929  
930 930  )))
931 931  
932 -(% style="display:none" %) (%%)
933 -
934 934  == 7.13 Rx2 Window Frequency ==
935 935  
936 -
937 937  Feature: Get or Set the Rx2 window frequency
938 938  
939 939  
940 -(% style="color:blue" %)**AT Command:  AT+RX2FQ**
911 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
941 941  
913 +
942 942  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
943 943  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
944 944  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -949,17 +949,13 @@
949 949  
950 950  )))
951 951  
952 -(% style="display:none" %) (%%)
953 -
954 954  == 7.14 Transmit Power ==
955 955  
956 -
957 957  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
958 958  
959 -(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
960 960  
929 +(% style="color:blue" %)**AT Command:AT+TXP**
961 961  
962 -(% style="color:blue" %)**AT Command:  AT+TXP**
963 963  
964 964  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
965 965  |=(% colspan="3" style="width: 462px;" %)AT+TXP
... ... @@ -975,19 +975,17 @@
975 975  
976 976  If the downlink payload=22000100, it means setting the TXP to 0.
977 977  
978 -* **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
979 -* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+TXP=0.
946 +* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
947 +* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
980 980  
981 -(% style="display:none" %) (%%)
982 -
983 983  == 7.15 RSSI of the Last Received Packet ==
984 984  
985 -
986 986  Feature: Get or Set the Rx2 window frequency
987 987  
988 988  
989 989  (% style="color:blue" %)**AT Command:AT+RSSI**
990 990  
956 +
991 991  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
992 992  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
993 993  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -995,16 +995,14 @@
995 995  OK
996 996  )))
997 997  
998 -(% style="display:none" %) (%%)
999 -
1000 1000  == 7.16 SNR of the Last Received Packet ==
1001 1001  
1002 -
1003 1003  Feature: Get the SNR of the last received packet
1004 1004  
1005 1005  
1006 -(% style="color:blue" %)**AT Command:  AT+SNR**
969 +(% style="color:blue" %)**AT Command:AT+SNR**
1007 1007  
971 +
1008 1008  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
1009 1009  |=(% colspan="3" style="width: 568px;" %)AT+SNR
1010 1010  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -1012,16 +1012,14 @@
1012 1012  OK
1013 1013  )))
1014 1014  
1015 -(% style="display:none" %) (%%)
1016 -
1017 1017  == 7.17 Application Port ==
1018 1018  
1019 -
1020 1020  Feature: Get or set the application port.
1021 1021  
1022 1022  
1023 1023  (% style="color:blue" %)**AT Command: AT+PORT**
1024 1024  
986 +
1025 1025  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
1026 1026  |=(% colspan="3" style="width: 497px;" %)AT+PORT
1027 1027  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
... ... @@ -1032,23 +1032,22 @@
1032 1032  
1033 1033  (% style="color:blue" %)**Downlink Command: 0x23**
1034 1034  
997 +
1035 1035  Format: Command Code (0x23) followed by 1 bytes port value.
1036 1036  
1037 1037  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
1038 1038  
1039 -* **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1040 -* **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1002 +* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
1003 +* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
1041 1041  
1042 -(% style="display:none" %) (%%)
1043 -
1044 1044  == 7.18 Single Channel Mode ==
1045 1045  
1046 -
1047 1047  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
1048 1048  
1049 1049  
1050 1050  (% style="color:blue" %)**AT Command: AT+CHS**
1051 1051  
1012 +
1052 1052  (% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
1053 1053  |=(% colspan="3" style="width: 600px;" %)AT+CHS
1054 1054  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -1057,16 +1057,14 @@
1057 1057  )))
1058 1058  |(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
1059 1059  
1060 -(% style="display:none" %) (%%)
1061 -
1062 1062  == 7.19 Eight Channel Mode ==
1063 1063  
1064 -
1065 1065  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1066 1066  
1067 1067  
1068 1068  (% style="color:blue" %)**AT Command: AT+CHE**
1069 1069  
1028 +
1070 1070  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1071 1071  |=(% colspan="3" style="width: 707px;" %)AT+CHE
1072 1072  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -1077,25 +1077,24 @@
1077 1077  )))
1078 1078  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1079 1079  
1080 -(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
1039 +(% style="color:blue" %)**Downlink Command: 0x24**
1081 1081  
1041 +
1082 1082  Format: Command Code (0x24) followed by 1 bytes channel value.
1083 1083  
1084 1084  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1085 1085  
1086 -* **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1087 -* **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1046 +* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1047 +* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
1088 1088  
1089 -(% style="display:none" %) (%%)
1090 -
1091 1091  == 7.20 Get or Set RXwindows1 timeout ==
1092 1092  
1051 +Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1093 1093  
1094 -Feature: Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1095 1095  
1096 -
1097 1097  (% style="color:blue" %)**AT Command: AT+RX1WTO**
1098 1098  
1056 +
1099 1099  (% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1100 1100  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1101 1101  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
... ... @@ -1104,10 +1104,8 @@
1104 1104  )))
1105 1105  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1106 1106  
1107 -(% style="display:none" %) (%%)
1108 -
1109 1109  (((
1110 -(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1066 +**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1111 1111  )))
1112 1112  
1113 1113  [[image:image-20220526162535-1.png]]
... ... @@ -1114,17 +1114,18 @@
1114 1114  
1115 1115  (((
1116 1116  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1073 +
1074 +
1117 1117  )))
1118 1118  
1119 -
1120 1120  == 7.21 Get or Set RXwindows2 timeout ==
1121 1121  
1079 +Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1122 1122  
1123 -Feature: Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1124 1124  
1125 -
1126 1126  (% style="color:blue" %)**AT Command: AT+RX2WTO**
1127 1127  
1084 +
1128 1128  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1129 1129  |=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1130 1130  |(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
... ... @@ -1133,16 +1133,14 @@
1133 1133  )))
1134 1134  |(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1135 1135  
1136 -(% style="display:none" %) (%%)
1137 -
1138 1138  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1139 1139  
1140 -
1141 1141  Feature: Get or Set uplinkdwelltime
1142 1142  
1143 1143  
1144 1144  (% style="color:blue" %)**AT Command: AT+DWELLT**
1145 1145  
1100 +
1146 1146  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1147 1147  |=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1148 1148  |(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
... ... @@ -1153,23 +1153,20 @@
1153 1153  
1154 1154  (% style="color:blue" %)**Downlink Command: 0x25**
1155 1155  
1111 +
1156 1156  Format: Command Code (0x25) followed by 1 bytes state value.
1157 1157  
1158 1158  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1159 1159  
1160 -* **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1161 -* **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1116 +* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1117 +* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1162 1162  
1163 -(% style="display:none" %) (%%)
1164 -
1165 1165  == 7.23 Set Packet Receiving Response Level ==
1166 1166  
1167 -
1168 1168  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1169 1169  
1123 +RPL value:
1170 1170  
1171 -**RPL value:**
1172 -
1173 1173  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1174 1174  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1175 1175  * **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
... ... @@ -1176,7 +1176,7 @@
1176 1176  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1177 1177  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1178 1178  
1179 -**Case Analyes:**
1131 +Case Analyes:
1180 1180  
1181 1181  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1182 1182  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
... ... @@ -1184,6 +1184,7 @@
1184 1184  
1185 1185  (% style="color:blue" %)**AT Command: AT+RPL**
1186 1186  
1139 +
1187 1187  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1188 1188  |=(% colspan="3" style="width: 533px;" %)AT+RPL
1189 1189  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
... ... @@ -1194,31 +1194,27 @@
1194 1194  
1195 1195  (% style="color:blue" %)**Downlink Command: 0x21**
1196 1196  
1150 +
1197 1197  Format: Command Code (0x21) followed by 1 bytes level value.
1198 1198  
1199 1199  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1200 1200  
1201 -* **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1202 -* **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1155 +* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1156 +* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1203 1203  
1204 -(% style="display:none" %) (%%)
1205 -
1206 1206  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1207 1207  
1208 1208  
1209 1209  (% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1210 1210  
1211 -(% border="1" style="background-color:#ffffcc; color:green; width:589px" %)
1212 -|=(% colspan="3" style="width: 586px;" %)AT+**SETMAXNBTRANS**
1213 -|(% style="width:227px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:87px" %)**Response**
1214 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1163 +
1164 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1165 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1166 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1167 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1215 1215  OK
1216 1216  )))
1217 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1218 -value2: 0: uplink fcnt doesn't change for each NBTrans;
1219 -
1220 -1: uplink fcnt increase by 1 for each NBTrans.
1221 -)))|(% style="width:87px" %)(((
1170 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1222 1222  1
1223 1223  
1224 1224  OK
... ... @@ -1226,25 +1226,20 @@
1226 1226  
1227 1227  (% style="color:blue" %)**Downlink Command: 0x33**
1228 1228  
1178 +
1229 1229  Format: Command Code (0x33) followed by 2 bytes mode value.
1230 1230  
1231 1231  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1232 1232  
1233 -* Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1234 -* Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1183 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1184 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1235 1235  
1236 -(% style="display:none" %) (%%)
1237 -
1238 1238  == 7.25 Device offline rejoining （LWS007) ==
1239 1239  
1240 1240  
1241 1241  (% style="color:blue" %)**AT Command: AT+DDETECT**
1242 1242  
1243 -AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
1244 1244  
1245 -* ACK_Timout_1: Unit: min
1246 -* ACK_Timout_2: Unit: min
1247 -
1248 1248  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1249 1249  |=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1250 1250  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -1276,25 +1276,21 @@
1276 1276  OK
1277 1277  )))
1278 1278  
1279 -(% style="color:blue" %)**Downlink Command: 0x32**
1223 +(% style="color:blue" %)**Downlink Command: 0x33**
1280 1280  
1225 +
1281 1281  Format: Command Code (0x32) followed by 2 bytes mode value.
1282 1282  
1283 -If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1228 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1284 1284  
1285 -* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1286 -** 0x01 : Flag
1287 -** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1288 -** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
1289 -** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1230 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1290 1290  
1291 -(% style="display:none" %) (%%)
1292 -
1293 1293  == 7.26 Request the server to send an ACK ==
1294 1294  
1295 1295  
1296 1296  (% style="color:blue" %)**AT Command: AT+PNACKMD**
1297 1297  
1237 +
1298 1298  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1299 1299  |=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1300 1300  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
... ... @@ -1303,61 +1303,53 @@
1303 1303  )))
1304 1304  |(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1305 1305  0
1246 +
1306 1306  OK
1307 1307  )))
1308 1308  
1309 -(% style="display:none" %) (%%)
1310 -
1311 1311  == 7.27 Adjust network rejoining interval ==
1312 1312  
1313 1313  
1314 1314  (% style="color:blue" %)**AT Command: AT+RJTDC**
1315 1315  
1255 +
1316 1316  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1317 1317  |=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1318 1318  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1319 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1259 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1320 1320  OK
1321 1321  
1322 -the interval is 30 min
1262 +the interval is 30000ms = 30s
1323 1323  )))
1324 -|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1325 -Set the ReJoin data transmission interval to 60 min
1264 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1265 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1326 1326  )))
1327 1327  
1328 1328  (% style="color:blue" %)**Downlink Command: 0x26**
1329 1329  
1270 +
1330 1330  Format: Command Code (0x26) followed by 2 bytes mode value.
1331 1331  
1332 1332  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1333 1333  
1334 -* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1335 -* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1275 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1276 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1336 1336  
1337 -(% style="display:none" %) (%%)
1338 -
1339 1339  = 8. AT Commands Combination =
1340 1340  
1341 1341  == 8.1 Set a fix RX2DR for downlink window ==
1342 1342  
1282 +* **AT+ADR=0 **~-~-> Disable ADR first
1283 +* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
1343 1343  
1344 -* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1345 -
1346 -* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1347 -
1348 -(% style="display:none" %) (%%)
1349 -
1350 1350  == 8.2 Use Downlink Command to set a fix uplink DR ==
1351 1351  
1352 1352  
1353 1353  (% style="color:blue" %)**Downlink Command: 0x22000500**
1354 1354  
1355 -**Same as:**
1356 1356  
1357 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1291 +Same as:
1358 1358  
1359 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1360 -
1361 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1362 -
1363 -
1293 +* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1294 +* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1295 +* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0