Last modified by kai on 2024/09/06 10:00
<
From version < 58.3 >
edited by Xiaoling
on 2022/12/02 13:51
To version < 63.42 >
edited by Xiaoling
on 2023/05/29 14:57
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -10,39 +10,34 @@
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 12  * (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 +
13 13  * (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 15  (((
16 16  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17 -
18 -
19 19  )))
20 20  
20 +
21 21  = 2. How to use AT Commands or Downlink command =
22 22  
23 23  
24 24  * **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
25 +
25 25  * **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
26 26  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
27 27  ** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
28 28  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
29 29  
31 +(% style="display:none" %) (%%)
30 30  
31 31  = 3. Support End Node and firmware version =
32 32  
33 33  
34 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
35 -|=(% colspan="3" style="width: 963px;" %)(((
36 36  Dragino STM32 base hardware Firmware / LoRaWAN stack list
37 -)))
37 +
38 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:966px" %)
39 +|(% style="background-color:#4f81bd; color:white; width:187px" %)**Model**|(% style="background-color:#4f81bd; color:white; width:330px" %)**Description**|(% style="background-color:#4f81bd; color:white; width:445px" %)**Firmware Version <~-~-> Stack Version**
38 38  |(% style="width:187px" %)(((
39 -**Model**
40 -)))|(% style="width:330px" %)(((
41 -**Description**
42 -)))|(% style="width:445px" %)(((
43 -**Firmware Version <~-~-> Stack Version**
44 -)))
45 -|(% style="width:187px" %)(((
46 46  [[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
47 47  )))|(% style="width:330px" %)(((
48 48  Open Source Generic LoRaWAN Sensor Node
... ... @@ -102,8 +102,8 @@
102 102  )))
103 103  )))
104 104  
100 +(% style="display:none" %) (%%)
105 105  
106 -
107 107  = 4. System Management Commands =
108 108  
109 109  == 4.1 Change Uplink Interval ==
... ... @@ -114,9 +114,8 @@
114 114  
115 115  (% style="color:blue" %)**AT Command: AT+TDC**
116 116  
117 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
118 -|=(% colspan="3" style="width: 724px;" %)AT+TDC
119 -|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
112 +(% border="1" style="background-color:#f2f2f2; width:727.222px" %)
113 +|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:329px" %)**Response**
120 120  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
121 121  OK
122 122  
... ... @@ -127,8 +127,6 @@
127 127  )))
128 128  
129 129  (((
130 -
131 -
132 132  (% style="color:blue" %)**Downlink Command: 0x01**
133 133  
134 134  Format: Command Code (0x01) followed by 3 bytes time value.
... ... @@ -139,10 +139,11 @@
139 139  )))
140 140  
141 141  * **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
134 +
142 142  * **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
143 143  
137 +(% style="display:none" %) (%%)
144 144  
145 -
146 146  == 4.2 Reboot End Node ==
147 147  
148 148  
... ... @@ -149,11 +149,10 @@
149 149  Feature: Reboot End Node to perform a new OTAA or ABP Join.
150 150  
151 151  
152 -(% style="color:blue" %)**AT Command: ATZ**
145 +(% style="color:blue" %)**AT Command: ATZ  ~/~/ **(%%)Trig a reset of the MCU
153 153  
154 -(% border="1" style="background-color:#ffffcc; color:green; width:546px" %)
155 -|=(% colspan="3" style="width: 543px;" %)ATZ: Trig a reset of the MCU
156 -|(% style="width:157px" %)**Command Example**|(% style="width:92px" %)**Function**|(% style="width:294px" %)**Response**
147 +(% border="1" style="background-color:#f2f2f2; width:546px" %)
148 +|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:92px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:294px" %)**Response**
157 157  |(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
158 158  Device reset and show booting info
159 159  
... ... @@ -175,11 +175,10 @@
175 175  )))
176 176  
177 177  (((
178 -If the downlink payload=**04FF**, the end node will reboot.
179 -
180 -
170 +If the downlink payload=**04FF**, the end node will reboot.
181 181  )))
182 182  
173 +
183 183  == 4.3 Reset to factory Default ==
184 184  
185 185  
... ... @@ -186,11 +186,10 @@
186 186  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
187 187  
188 188  
189 -(% style="color:blue" %)**AT Command: AT+FDR**
180 +(% style="color:blue" %)**AT Command: AT+FDR  ~/~/  **(%%)Reset to factory default
190 190  
191 -(% border="1" style="background-color:#ffffcc; color:green; width:789px" %)
192 -|=(% colspan="3" style="width: 786px;" %)Reset to factory default
193 -|(% style="width:154px" %)**Command Example**|(% style="width:175px" %)**Function**|(% style="width:456px" %)**Response**
182 +(% border="1" style="background-color:#f2f2f2; width:789px" %)
183 +|(% style="background-color:#4f81bd; color:white; width:154px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:175px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:456px" %)**Response**
194 194  |(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
195 195  Device reset to factory default parameters and show booting info
196 196  
... ... @@ -222,11 +222,10 @@
222 222  Feature: Show firmware version. No downlink command yet.
223 223  
224 224  
225 -(% style="color:blue" %)**AT Command: AT+VER**
215 +(% style="color:blue" %)**AT Command: AT+VER  ~/~/   **(%%)Image Version and Frequency Band
226 226  
227 -(% border="1" style="background-color:#ffffcc; color:green; width:542px" %)
228 -|=(% colspan="3" style="width: 539px;" %)AT+VER: Image Version and Frequency Band
229 -|(% style="width:157px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:86px" %)**Response**
217 +(% border="1" style="background-color:#f2f2f2; width:542px" %)
218 +|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:86px" %)**Response**
230 230  |(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
231 231  1.3 EU868
232 232  
... ... @@ -246,7 +246,7 @@
246 246  (((
247 247  
248 248  
249 -**xx: Software Type:**
238 +(% style="color:#037691" %)**xx: Software Type:**
250 250  )))
251 251  
252 252  * 0x00 01: LGT92 Version
... ... @@ -256,7 +256,7 @@
256 256  (((
257 257  
258 258  
259 -**yy: Frequency Band:**
248 +(% style="color:#037691" %)**yy: Frequency Band:**
260 260  )))
261 261  
262 262  * 0x01: EU868
... ... @@ -273,7 +273,7 @@
273 273  (((
274 274  
275 275  
276 -**zz: Subband**
265 +(% style="color:#037691" %)**zz: Subband**
277 277  )))
278 278  
279 279  firmware version: v1.1.0 ~-~-> 110
... ... @@ -285,27 +285,21 @@
285 285  Feature: Show All configure. No downlink command yet.
286 286  
287 287  
288 -(% style="color:blue" %)**AT Command: AT+CFG**
277 +(% style="color:blue" %)**AT Command: AT+CFG  ~/~/ **(%%)Print all configurations
289 289  
290 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
291 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
292 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
279 +(% border="1" style="background-color:#f2f2f2; width:599.222px" %)
280 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:154px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:280px" %)**Response**
293 293  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
294 294  AT+DEUI = XX XX XX XX XX XX XX XX
295 -
296 296  AT+DADDR=XXXXXXXX
297 -
298 298  ……….
299 -
300 300  AT+RX2WTO=X
301 -
302 302  AT+CHS=868100000
303 -
304 304  OK
305 305  )))
306 306  
290 +(% style="display:none" %) (%%)
307 307  
308 -
309 309  = 5. Keys, IDs and EUIs management =
310 310  
311 311  == 5.1 Application EUI ==
... ... @@ -316,16 +316,15 @@
316 316  
317 317  (% style="color:blue" %)**AT Command: AT+APPEUI**
318 318  
319 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
320 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI
321 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
302 +(% border="1" style="background-color:#f2f2f2; width:686.222px" %)
303 +|(% style="background-color:#4f81bd; color:white; width:305px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:186px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:191px" %)**Response**
322 322  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
323 323  OK
324 324  )))
325 325  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
326 326  
309 +(% style="display:none" %) (%%)
327 327  
328 -
329 329  == 5.2 Application Key ==
330 330  
331 331  
... ... @@ -334,16 +334,15 @@
334 334  
335 335  (% style="color:blue" %)**AT Command: AT+APPKEY**
336 336  
337 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
338 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY
339 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
319 +(% border="1" style="background-color:#f2f2f2; width:976.222px" %)
320 +|(% style="background-color:#4f81bd; color:white; width:441px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:180px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:350px" %)**Response**
340 340  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
341 341  OK
342 342  )))
343 343  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
344 344  
326 +(% style="display:none" %) (%%)
345 345  
346 -
347 347  == 5.3 Application Session Key ==
348 348  
349 349  
... ... @@ -352,9 +352,8 @@
352 352  
353 353  (% style="color:blue" %)**AT Command: AT+APPSKEY**
354 354  
355 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
356 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
357 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
336 +(% border="1" style="background-color:#f2f2f2; width:1040.22px" %)
337 +|(% style="background-color:#4f81bd; color:white; width:451px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:231px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:354px" %)**Response**
358 358  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
359 359  OK
360 360  )))
... ... @@ -362,8 +362,8 @@
362 362  OK
363 363  )))
364 364  
345 +(% style="display:none" %) (%%)
365 365  
366 -
367 367  == 5.4 Device Address ==
368 368  
369 369  
... ... @@ -372,9 +372,8 @@
372 372  
373 373  (% style="color:blue" %)**AT Command: AT+DADDR**
374 374  
375 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
376 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR
377 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
355 +(% border="1" style="background-color:#f2f2f2; width:795.222px" %)
356 +|(% style="background-color:#4f81bd; color:white; width:192px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:241px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:359px" %)**Response**
378 378  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
379 379  A8 40 41 FF
380 380  
... ... @@ -382,8 +382,8 @@
382 382  )))
383 383  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
384 384  
364 +(% style="display:none" %) (%%)
385 385  
386 -
387 387  == 5.5 Device EUI ==
388 388  
389 389  
... ... @@ -392,9 +392,8 @@
392 392  
393 393  (% style="color:blue" %)**AT Command: AT+DEUI**
394 394  
395 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
396 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI
397 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
374 +(% border="1" style="background-color:#f2f2f2; width:1035.22px" %)
375 +|(% style="background-color:#4f81bd; color:white; width:250px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:634px" %)**Response**
398 398  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
399 399  OK
400 400  )))
... ... @@ -402,8 +402,8 @@
402 402  OK
403 403  )))
404 404  
383 +(% style="display:none" %) (%%)
405 405  
406 -
407 407  == 5.6 Network ID ==
408 408  
409 409  
... ... @@ -412,16 +412,15 @@
412 412  
413 413  (% style="color:blue" %)**AT Command: AT+NWKID**
414 414  
415 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
416 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID
417 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
393 +(% border="1" style="background-color:#f2f2f2; width:448.222px" %)
394 +|(% style="background-color:#4f81bd; color:white; width:191px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:153px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
418 418  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
419 419  OK
420 420  )))
421 421  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
422 422  
400 +(% style="display:none" %) (%%)
423 423  
424 -
425 425  == 5.7 Network Session Key ==
426 426  
427 427  
... ... @@ -430,16 +430,15 @@
430 430  
431 431  (% style="color:blue" %)**AT Command: AT+NWKSKEY**
432 432  
433 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
434 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
435 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
410 +(% border="1" style="background-color:#f2f2f2; width:1017.22px" %)
411 +|(% style="background-color:#4f81bd; color:white; width:455px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:215px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:343px" %)**Response**
436 436  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
437 437  OK
438 438  )))
439 439  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
440 440  
417 +(% style="display:none" %) (%%)
441 441  
442 -
443 443  = 6. Joining and sending date on LoRaWAN network =
444 444  
445 445  == 6.1 Confirm Mode ==
... ... @@ -452,9 +452,8 @@
452 452  
453 453  (% style="color:blue" %)**AT Command: AT+CFM**
454 454  
455 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
456 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
457 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
431 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
432 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:205px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:346px" %)**Response**
458 458  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
459 459  OK
460 460  )))
... ... @@ -468,18 +468,18 @@
468 468  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
469 469  
470 470  * **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
446 +
471 471  * **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
472 472  
449 +(% style="display:none" %) (%%)
473 473  
474 -
475 475  === 6.1.2  AT+CFM command since DR-LWS007 software stack ===
476 476  
477 477  
478 478  (% style="color:blue" %)**AT Command: AT+CFM**
479 479  
480 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
481 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
482 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
456 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
457 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
483 483  |(% style="width:160px" %)(((
484 484  AT+CFM=1,0,0
485 485  
... ... @@ -515,10 +515,11 @@
515 515  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
516 516  
517 517  * **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
493 +
518 518  * **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
519 519  
496 +(% style="display:none" %) (%%)
520 520  
521 -
522 522  == 6.2 Confirm Status ==
523 523  
524 524  
... ... @@ -527,15 +527,14 @@
527 527  
528 528  (% style="color:blue" %)**AT Command: AT+CFS**
529 529  
530 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
531 -|=(% colspan="3" style="width: 531px;" %)AT+CFS
532 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
533 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
506 +(% border="1" style="background-color:#f2f2f2; width:463px" %)
507 +|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
508 +|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
534 534  OK
535 535  )))
536 536  
512 +(% style="display:none" %) (%%)
537 537  
538 -
539 539  == 6.3 Join LoRa® Network ==
540 540  
541 541  
... ... @@ -544,17 +544,15 @@
544 544  
545 545  (% style="color:blue" %)**AT Command: AT+JOIN**
546 546  
547 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
548 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN
549 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
522 +(% border="1" style="background-color:#f2f2f2; width:647.222px" %)
523 +|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:334px" %)**Response**
550 550  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
551 551  OK
552 -
553 553  While Error in format, return AT_BUSY_ERROR
554 554  )))
555 555  
529 +(% style="display:none" %) (%%)
556 556  
557 -
558 558  == 6.4 LoRa® Network Join Mode ==
559 559  
560 560  
... ... @@ -563,9 +563,8 @@
563 563  
564 564  (% style="color:blue" %)**AT Command: AT+NJM**
565 565  
566 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
567 -|=(% colspan="3" style="width: 750px;" %)AT+NJM
568 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
539 +(% border="1" style="background-color:#f2f2f2; width:753.222px" %)
540 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
569 569  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
570 570  OK
571 571  )))
... ... @@ -579,10 +579,11 @@
579 579  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
580 580  
581 581  * **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
554 +
582 582  * **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
583 583  
557 +(% style="display:none" %) (%%)
584 584  
585 -
586 586  == 6.5 LoRa® Network Join Status ==
587 587  
588 588  
... ... @@ -591,15 +591,14 @@
591 591  
592 592  (% style="color:blue" %)**AT Command: AT+NJS**
593 593  
594 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
595 -|=(% colspan="3" style="width: 495px;" %)AT+NJS
596 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
567 +(% border="1" style="background-color:#f2f2f2; width:498.222px" %)
568 +|(% style="background-color:#4f81bd; color:white; width:169px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:164px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:161px" %)**Response**
597 597  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
598 598  OK
599 599  )))
600 600  
573 +(% style="display:none" %) (%%)
601 601  
602 -
603 603  == 6.6 Print Last Received Data in Raw Format ==
604 604  
605 605  
... ... @@ -608,15 +608,14 @@
608 608  
609 609  (% style="color:blue" %)**AT Command: AT+RECV**
610 610  
611 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
612 -|=(% colspan="3" style="width: 584px;" %)AT+RECV
613 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
583 +(% border="1" style="background-color:#f2f2f2; width:587.222px" %)
584 +|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:150px" %)**Response**
614 614  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
615 615  OK
616 616  )))
617 617  
589 +(% style="display:none" %) (%%)
618 618  
619 -
620 620  == 6.7 Print Last Received Data in Binary Format ==
621 621  
622 622  
... ... @@ -625,15 +625,14 @@
625 625  
626 626  (% style="color:blue" %)**AT Command: AT+RECVB**
627 627  
628 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
629 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB
630 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
599 +(% border="1" style="background-color:#f2f2f2; width:793.222px" %)
600 +|(% style="background-color:#4f81bd; color:white; width:173px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:497px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:120px" %)**Response**
631 631  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
632 632  OK
633 633  )))
634 634  
605 +(% style="display:none" %) (%%)
635 635  
636 -
637 637  == 6.8 Send Text Data ==
638 638  
639 639  
... ... @@ -642,19 +642,15 @@
642 642  
643 643  (% style="color:blue" %)**AT Command: AT+SEND**
644 644  
645 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
646 -|=(% colspan="3" style="width: 988px;" %)AT+SEND
647 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
615 +(% border="1" style="background-color:#f2f2f2; width:991.222px" %)
616 +|(% style="background-color:#4f81bd; color:white; width:201px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:340px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:446px" %)**Response**
648 648  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
649 649  While Error in format, return
650 -
651 651  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
652 -
653 -
654 654  )))
655 655  
622 +(% style="display:none" %) (%%)
656 656  
657 -
658 658  == 6.9 Send Hexadecimal Data ==
659 659  
660 660  
... ... @@ -663,18 +663,15 @@
663 663  
664 664  (% style="color:blue" %)**AT Command: AT+SENDB**
665 665  
666 -(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
667 -|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
668 -|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
669 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
670 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
671 -AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
672 -
673 -
632 +(% border="1" style="width:974px" %)
633 +|(% style="background-color:#4f81bd; color:white; width:257px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:394px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:318px" %)**Response**
634 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)OK
635 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)While Error in format, return(((
636 +AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
674 674  )))
675 675  
639 +(% style="display:none" %) (%%)
676 676  
677 -
678 678  = 7. LoRaWAN network management =
679 679  
680 680  == 7.1 Adaptive Data Rate ==
... ... @@ -685,14 +685,13 @@
685 685  
686 686  (% style="color:blue" %)**AT Command: AT+ADR**
687 687  
688 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
689 -|=(% colspan="3" style="width: 680px;" %)AT+ADR
690 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
691 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
651 +(% border="1" style="width:643px" %)
652 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:266px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:209px" %)**Response**
653 +|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:209px" %)1(((
692 692  OK
693 693  )))
694 -|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK
695 -|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((
656 +|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)OK
657 +|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)While Error in format, return(((
696 696  AT_PARAM_ERROR
697 697  )))
698 698  
... ... @@ -701,10 +701,11 @@
701 701  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
702 702  
703 703  * **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
666 +
704 704  * **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
705 705  
669 +(% style="display:none" %) (%%)
706 706  
707 -
708 708  == 7.2 LoRa® Class ==
709 709  
710 710  
... ... @@ -713,9 +713,8 @@
713 713  
714 714  (% style="color:blue" %)**AT Command:  AT+CLASS**
715 715  
716 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
717 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS
718 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
679 +(% border="1" style="background-color:#f2f2f2; width:507.222px" %)
680 +|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:166px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:175px" %)**Response**
719 719  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
720 720  OK
721 721  )))
... ... @@ -723,19 +723,23 @@
723 723  
724 724  )))
725 725  
688 +(% style="display:none" %)
726 726  
690 +(% style="color:red" %)**Notice:**
727 727  
692 +* Run AT+FDR before running AT+CLASS=C
693 +* After change to Class=C, Before OTAA Join Successfule, the end node will still shows to use CLASS=A for OTAA Joined. It will use CLASS=C after OTAA Join Succeccful.
694 +
728 728  == 7.3 Duty Cycle Setting ==
729 729  
730 730  
731 -Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
698 +Feature: Get or Set the ETSI Duty Cycle setting** : 0**=disable, **1**=enable - Only for testing.
732 732  
733 733  
734 734  (% style="color:blue" %)**AT Command:  AT+DCS**
735 735  
736 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
737 -|=(% colspan="3" style="width: 512px;" %)AT+DCS
738 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
703 +(% border="1" style="background-color:#f2f2f2; width:515.222px" %)
704 +|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
739 739  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
740 740  OK
741 741  )))
... ... @@ -743,8 +743,8 @@
743 743  
744 744  )))
745 745  
712 +(% style="display:none" %) (%%)
746 746  
747 -
748 748  == 7.4 Data Rate ==
749 749  
750 750  
... ... @@ -754,13 +754,13 @@
754 754  **Notice:**
755 755  
756 756  * User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
723 +
757 757  * Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
758 758  
759 759  (% style="color:blue" %)**AT Command: AT+DR**
760 760  
761 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
762 -|=(% colspan="3" style="width: 463px;" %)AT+DR
763 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
728 +(% border="1" style="background-color:#f2f2f2; width:466.222px" %)
729 +|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:167px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:140px" %)**Response**
764 764  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
765 765  OK
766 766  )))
... ... @@ -773,10 +773,11 @@
773 773  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
774 774  
775 775  * **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
742 +
776 776  * **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
777 777  
745 +(% style="display:none" %) (%%)
778 778  
779 -
780 780  == 7.5 Frame Counter Downlink ==
781 781  
782 782  
... ... @@ -785,9 +785,8 @@
785 785  
786 786  (% style="color:blue" %)**AT Command:  AT+FCD**
787 787  
788 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
789 -|=(% colspan="3" style="width: 690px;" %)AT+FCD
790 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
755 +(% border="1" style="background-color:#f2f2f2; width:693.222px" %)
756 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:258px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:269px" %)**Response**
791 791  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
792 792  OK
793 793  )))
... ... @@ -795,8 +795,8 @@
795 795  OK
796 796  )))
797 797  
764 +(% style="display:none" %) (%%)
798 798  
799 -
800 800  == 7.6 Frame Counter Uplink ==
801 801  
802 802  Feature: Get or Set the Frame Counter Uplink.
... ... @@ -804,9 +804,8 @@
804 804  
805 805  (% style="color:blue" %)**AT Command:  AT+FCU**
806 806  
807 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
808 -|=(% colspan="3" style="width: 531px;" %)AT+FCU
809 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
773 +(% border="1" style="background-color:#f2f2f2; width:534.222px" %)
774 +|(% style="background-color:#4f81bd; color:white; width:177px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
810 810  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
811 811  OK
812 812  )))
... ... @@ -814,8 +814,8 @@
814 814  
815 815  )))
816 816  
782 +(% style="display:none" %) (%%)
817 817  
818 -
819 819  == 7.7 Join Accept Delay1 ==
820 820  
821 821  
... ... @@ -824,9 +824,8 @@
824 824  
825 825  (% style="color:blue" %)**AT Command:  AT+JN1DL**
826 826  
827 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
828 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
829 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
792 +(% border="1" style="background-color:#f2f2f2; width:537.222px" %)
793 +|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:229px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:140px" %)**Response**
830 830  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
831 831  OK
832 832  )))
... ... @@ -834,8 +834,8 @@
834 834  
835 835  )))
836 836  
801 +(% style="display:none" %) (%%)
837 837  
838 -
839 839  == 7.8 Join Accept Delay2 ==
840 840  
841 841  
... ... @@ -844,9 +844,8 @@
844 844  
845 845  (% style="color:blue" %)**AT Command:  AT+JN2DL**
846 846  
847 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
848 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
849 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
811 +(% border="1" style="background-color:#f2f2f2; width:538.222px" %)
812 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:228px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:146px" %)**Response**
850 850  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
851 851  OK
852 852  )))
... ... @@ -854,8 +854,8 @@
854 854  
855 855  )))
856 856  
820 +(% style="display:none" %) (%%)
857 857  
858 -
859 859  == 7.9 Public Network Mode ==
860 860  
861 861  
... ... @@ -866,9 +866,8 @@
866 866  
867 867  (% style="color:blue" %)**AT Command:  AT+PNM**
868 868  
869 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
870 -|=(% colspan="3" style="width: 664px;" %)AT+PNM
871 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
832 +(% border="1" style="background-color:#f2f2f2; width:667.222px" %)
833 +|(% style="background-color:#4f81bd; color:white; width:166px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:225px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Response**
872 872  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
873 873  OK
874 874  )))
... ... @@ -883,8 +883,8 @@
883 883  )))
884 884  |(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
885 885  
848 +(% style="display:none" %) (%%)
886 886  
887 -
888 888  == 7.10 Receive Delay1 ==
889 889  
890 890  
... ... @@ -893,9 +893,8 @@
893 893  
894 894  (% style="color:blue" %)**AT Command: AT+RX1DL**
895 895  
896 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
897 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
898 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
858 +(% border="1" style="background-color:#f2f2f2; width:408.222px" %)
859 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:122px" %)**Response**
899 899  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
900 900  OK
901 901  )))
... ... @@ -903,8 +903,8 @@
903 903  
904 904  )))
905 905  
867 +(% style="display:none" %) (%%)
906 906  
907 -
908 908  == 7.11 Receive Delay2 ==
909 909  
910 910  
... ... @@ -913,9 +913,8 @@
913 913  
914 914  (% style="color:blue" %)**AT Command: AT+RX2DL**
915 915  
916 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
917 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
918 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
877 +(% border="1" style="background-color:#f2f2f2; width:481.222px" %)
878 +|(% style="background-color:#4f81bd; color:white; width:175px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:152px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:150px" %)**Response**
919 919  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
920 920  OK
921 921  )))
... ... @@ -923,8 +923,8 @@
923 923  
924 924  )))
925 925  
886 +(% style="display:none" %) (%%)
926 926  
927 -
928 928  == 7.12 Rx2 Window Data Rate ==
929 929  
930 930  
... ... @@ -933,9 +933,8 @@
933 933  
934 934  (% style="color:blue" %)**AT Command:  AT+RX2DR**
935 935  
936 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
937 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
938 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
896 +(% border="1" style="background-color:#f2f2f2; width:525.222px" %)
897 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:232px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:130px" %)**Response**
939 939  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
940 940  OK
941 941  )))
... ... @@ -943,8 +943,8 @@
943 943  
944 944  )))
945 945  
905 +(% style="display:none" %) (%%)
946 946  
947 -
948 948  == 7.13 Rx2 Window Frequency ==
949 949  
950 950  
... ... @@ -953,9 +953,8 @@
953 953  
954 954  (% style="color:blue" %)**AT Command:  AT+RX2FQ**
955 955  
956 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
957 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
958 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
915 +(% border="1" style="background-color:#f2f2f2; width:587.222px" %)
916 +|(% style="background-color:#4f81bd; color:white; width:183px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:240px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:160px" %)**Response**
959 959  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
960 960  OK
961 961  )))
... ... @@ -963,8 +963,8 @@
963 963  
964 964  )))
965 965  
924 +(% style="display:none" %) (%%)
966 966  
967 -
968 968  == 7.14 Transmit Power ==
969 969  
970 970  
... ... @@ -975,9 +975,8 @@
975 975  
976 976  (% style="color:blue" %)**AT Command:  AT+TXP**
977 977  
978 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
979 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
980 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
936 +(% border="1" style="background-color:#f2f2f2; width:465.222px" %)
937 +|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:189px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:112px" %)**Response**
981 981  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
982 982  OK
983 983  )))
... ... @@ -990,9 +990,10 @@
990 990  If the downlink payload=22000100, it means setting the TXP to 0.
991 991  
992 992  * **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
993 -* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+TXP=0.
994 994  
951 +* **Example 2**: Downlink Payload: **22000000**  ~/~/ Set AT+TXP=0.
995 995  
953 +(% style="display:none" %) (%%)
996 996  
997 997  == 7.15 RSSI of the Last Received Packet ==
998 998  
... ... @@ -1002,15 +1002,14 @@
1002 1002  
1003 1003  (% style="color:blue" %)**AT Command:AT+RSSI**
1004 1004  
1005 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
1006 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
1007 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
963 +(% border="1" style="background-color:#f2f2f2; width:557.222px" %)
964 +|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:289px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
1008 1008  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
1009 1009  OK
1010 1010  )))
1011 1011  
969 +(% style="display:none" %) (%%)
1012 1012  
1013 -
1014 1014  == 7.16 SNR of the Last Received Packet ==
1015 1015  
1016 1016  
... ... @@ -1019,15 +1019,14 @@
1019 1019  
1020 1020  (% style="color:blue" %)**AT Command:  AT+SNR**
1021 1021  
1022 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
1023 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
1024 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
979 +(% border="1" style="background-color:#f2f2f2; width:571.222px" %)
980 +|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:290px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
1025 1025  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
1026 1026  OK
1027 1027  )))
1028 1028  
985 +(% style="display:none" %) (%%)
1029 1029  
1030 -
1031 1031  == 7.17 Application Port ==
1032 1032  
1033 1033  
... ... @@ -1036,9 +1036,8 @@
1036 1036  
1037 1037  (% style="color:blue" %)**AT Command: AT+PORT**
1038 1038  
1039 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
1040 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
1041 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
995 +(% border="1" style="background-color:#f2f2f2; width:500.222px" %)
996 +|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:204px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Response**
1042 1042  |(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
1043 1043  OK
1044 1044  )))
... ... @@ -1051,10 +1051,11 @@
1051 1051  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
1052 1052  
1053 1053  * **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1009 +
1054 1054  * **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1055 1055  
1012 +(% style="display:none" %) (%%)
1056 1056  
1057 -
1058 1058  == 7.18 Single Channel Mode ==
1059 1059  
1060 1060  
... ... @@ -1063,16 +1063,15 @@
1063 1063  
1064 1064  (% style="color:blue" %)**AT Command: AT+CHS**
1065 1065  
1066 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
1067 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
1068 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
1022 +(% border="1" style="background-color:#f2f2f2; width:603.222px" %)
1023 +|(% style="background-color:#4f81bd; color:white; width:182px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:122px" %)**Response**
1069 1069  |(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
1070 1070  OK
1071 1071  )))
1072 1072  |(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
1073 1073  
1029 +(% style="display:none" %) (%%)
1074 1074  
1075 -
1076 1076  == 7.19 Eight Channel Mode ==
1077 1077  
1078 1078  
... ... @@ -1081,9 +1081,8 @@
1081 1081  
1082 1082  (% style="color:blue" %)**AT Command: AT+CHE**
1083 1083  
1084 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1085 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
1086 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1039 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
1040 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
1087 1087  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
1088 1088  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
1089 1089  
... ... @@ -1098,10 +1098,11 @@
1098 1098  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1099 1099  
1100 1100  * **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1055 +
1101 1101  * **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1102 1102  
1058 +(% style="display:none" %) (%%)
1103 1103  
1104 -
1105 1105  == 7.20 Get or Set RXwindows1 timeout ==
1106 1106  
1107 1107  
... ... @@ -1110,32 +1110,26 @@
1110 1110  
1111 1111  (% style="color:blue" %)**AT Command: AT+RX1WTO**
1112 1112  
1113 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1114 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1115 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1068 +(% border="1" style="background-color:#f2f2f2; width:460.222px" %)
1069 +|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:201px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:93px" %)**Response**
1116 1116  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
1117 1117  OK
1118 1118  )))
1119 1119  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1120 1120  
1121 -(((
1122 -
1075 +(% style="display:none" %) (%%)
1123 1123  
1124 -
1077 +(((
1125 1125  (% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1126 -
1127 -
1128 1128  )))
1129 1129  
1130 1130  [[image:image-20220526162535-1.png]]
1131 1131  
1132 -
1133 1133  (((
1134 1134  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1135 -
1136 -
1137 1137  )))
1138 1138  
1087 +
1139 1139  == 7.21 Get or Set RXwindows2 timeout ==
1140 1140  
1141 1141  
... ... @@ -1144,16 +1144,15 @@
1144 1144  
1145 1145  (% style="color:blue" %)**AT Command: AT+RX2WTO**
1146 1146  
1147 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1148 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1149 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1096 +(% border="1" style="background-color:#f2f2f2; width:497.222px" %)
1097 +|(% style="background-color:#4f81bd; color:white; width:190px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:199px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
1150 1150  |(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
1151 1151  OK
1152 1152  )))
1153 1153  |(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1154 1154  
1103 +(% style="display:none" %) (%%)
1155 1155  
1156 -
1157 1157  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1158 1158  
1159 1159  
... ... @@ -1162,9 +1162,8 @@
1162 1162  
1163 1163  (% style="color:blue" %)**AT Command: AT+DWELLT**
1164 1164  
1165 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1166 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1167 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1113 +(% border="1" style="background-color:#f2f2f2; width:497.222px" %)
1114 +|(% style="background-color:#4f81bd; color:white; width:183px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:179px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:131px" %)**Response**
1168 1168  |(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
1169 1169  OK
1170 1170  )))
... ... @@ -1177,10 +1177,11 @@
1177 1177  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1178 1178  
1179 1179  * **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1127 +
1180 1180  * **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1181 1181  
1130 +(% style="display:none" %) (%%)
1182 1182  
1183 -
1184 1184  == 7.23 Set Packet Receiving Response Level ==
1185 1185  
1186 1186  
... ... @@ -1187,25 +1187,30 @@
1187 1187  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1188 1188  
1189 1189  
1190 -**RPL value:**
1138 +(% style="color:blue" %)**RPL value:**
1191 1191  
1192 1192  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1141 +
1193 1193  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1143 +
1194 1194  * **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1145 +
1195 1195  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1147 +
1196 1196  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1197 1197  
1198 -**Case Analyes:**
1150 +(% style="color:blue" %)**Case Analyes:**
1199 1199  
1200 1200  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1153 +
1201 1201  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1155 +
1202 1202  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1203 1203  
1204 1204  (% style="color:blue" %)**AT Command: AT+RPL**
1205 1205  
1206 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1207 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1208 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1160 +(% border="1" style="background-color:#f2f2f2; width:536.222px" %)
1161 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:263px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:109px" %)**Response**
1209 1209  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
1210 1210  OK
1211 1211  )))
... ... @@ -1218,22 +1218,22 @@
1218 1218  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1219 1219  
1220 1220  * **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1174 +
1221 1221  * **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1222 1222  
1177 +(% style="display:none" %) (%%)
1223 1223  
1224 -
1225 1225  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1226 1226  
1227 1227  
1228 1228  (% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1229 1229  
1230 -(% border="1" style="background-color:#ffffcc; color:green; width:589px" %)
1231 -|=(% colspan="3" style="width: 586px;" %)AT+**SETMAXNBTRANS**
1232 -|(% style="width:227px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:87px" %)**Response**
1233 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1184 +(% border="1" style="background-color:#f2f2f2; width:589px" %)
1185 +|(% style="background-color:#4f81bd; color:white; width:227px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:300px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:87px" %)**Response**
1186 +|(% style="width:227px" %)AT+SETMAXNBTRANS=1，0|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1234 1234  OK
1235 1235  )))
1236 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1189 +|(% style="width:227px" %)AT+SETMAXNBTRANS=？，1|(% style="width:300px" %)(((
1237 1237  value2: 0: uplink fcnt doesn't change for each NBTrans;
1238 1238  
1239 1239  1: uplink fcnt increase by 1 for each NBTrans.
... ... @@ -1250,18 +1250,23 @@
1250 1250  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1251 1251  
1252 1252  * Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1206 +
1253 1253  * Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1254 1254  
1209 +(% style="display:none" %) (%%)
1255 1255  
1256 -
1257 1257  == 7.25 Device offline rejoining （LWS007) ==
1258 1258  
1259 1259  
1260 1260  (% style="color:blue" %)**AT Command: AT+DDETECT**
1261 1261  
1262 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1263 -|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1264 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1216 +AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
1217 +
1218 +* ACK_Timout_1: Unit: min
1219 +* ACK_Timout_2: Unit: min
1220 +
1221 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
1222 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
1265 1265  |(% style="width:160px" %)(((
1266 1266  AT+DDETECT=1,1440,2880
1267 1267  
... ... @@ -1290,15 +1290,20 @@
1290 1290  OK
1291 1291  )))
1292 1292  
1293 -(% style="color:blue" %)**Downlink Command: 0x33**
1251 +(% style="color:blue" %)**Downlink Command: 0x32**
1294 1294  
1295 1295  Format: Command Code (0x32) followed by 2 bytes mode value.
1296 1296  
1297 -If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1255 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1298 1298  
1299 -* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1257 +* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1300 1300  
1259 +** 0x01 : Flag
1260 +** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1261 +** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
1262 +** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1301 1301  
1264 +(% style="display:none" %) (%%)
1302 1302  
1303 1303  == 7.26 Request the server to send an ACK ==
1304 1304  
... ... @@ -1305,35 +1305,32 @@
1305 1305  
1306 1306  (% style="color:blue" %)**AT Command: AT+PNACKMD**
1307 1307  
1308 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1309 -|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1310 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1311 -|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1271 +(% border="1" style="background-color:#f2f2f2; width:536.222px" %)
1272 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:263px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:109px" %)**Response**
1273 +|(% style="width:160px" %)AT+PNACKMD=1|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1312 1312  OK
1313 1313  )))
1314 -|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1276 +|(% style="width:160px" %)AT+PNACKMD=0|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1315 1315  0
1316 -
1317 1317  OK
1318 1318  )))
1319 1319  
1281 +(% style="display:none" %) (%%)
1320 1320  
1321 -
1322 1322  == 7.27 Adjust network rejoining interval ==
1323 1323  
1324 1324  
1325 1325  (% style="color:blue" %)**AT Command: AT+RJTDC**
1326 1326  
1327 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1328 -|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1329 -|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1330 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1288 +(% border="1" style="background-color:#f2f2f2; width:727.222px" %)
1289 +|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:329px" %)**Response**
1290 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1331 1331  OK
1332 1332  
1333 -the interval is 30000ms = 30s
1293 +the interval is 30 min
1334 1334  )))
1335 -|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1336 -Set the ReJoin data transmission interval to 60000ms = 60 seconds
1295 +|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1296 +Set the ReJoin data transmission interval to 60 min
1337 1337  )))
1338 1338  
1339 1339  (% style="color:blue" %)**Downlink Command: 0x26**
... ... @@ -1342,10 +1342,11 @@
1342 1342  
1343 1343  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1344 1344  
1345 -* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1346 -* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1305 +* **Example 1:** Downlink Payload: 26000A  ~/~/  Set AT+RJTDC=10
1347 1347  
1307 +* **Example 2: **Downlink Payload: 260002  ~/~/  Set AT+RJTDC=2
1348 1348  
1309 +(% style="display:none" %) (%%)
1349 1349  
1350 1350  = 8. AT Commands Combination =
1351 1351  
... ... @@ -1352,10 +1352,11 @@
1352 1352  == 8.1 Set a fix RX2DR for downlink window ==
1353 1353  
1354 1354  
1355 -* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1356 -* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1316 +* (% style="color:blue" %)**AT+ADR=0             **(%%) **~/~/**  Disable ADR first
1357 1357  
1318 +* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~/~/**  Set xxxx to your wanted DataRate
1358 1358  
1320 +(% style="display:none" %) (%%)
1359 1359  
1360 1360  == 8.2 Use Downlink Command to set a fix uplink DR ==
1361 1361  
... ... @@ -1365,7 +1365,9 @@
1365 1365  **Same as:**
1366 1366  
1367 1367  * AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1330 +
1368 1368  * AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1332 +
1369 1369  * AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1370 1370  
1371 1371  

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0