Last modified by kai on 2024/09/06 10:00
<
From version < 58.2 >
edited by Xiaoling
on 2022/12/02 13:45
To version < 50.13 >
edited by Xiaoling
on 2022/07/13 13:39
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -9,12 +9,11 @@
9 9  
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 -* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 -* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
12 +* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
13 +* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 15  (((
16 16  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17 -
18 18  
19 19  )))
20 20  
... ... @@ -21,10 +21,10 @@
21 21  = 2. How to use AT Commands or Downlink command =
22 22  
23 23  
24 -* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
25 -* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
23 +* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 +* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
26 26  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
27 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
28 28  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
29 29  
30 30  
... ... @@ -106,12 +106,12 @@
106 106  
107 107  = 4. System Management Commands =
108 108  
108 +
109 109  == 4.1 Change Uplink Interval ==
110 110  
111 111  
112 112  Feature: Change LoRaWAN End Node Transmit Interval.
113 113  
114 -
115 115  (% style="color:blue" %)**AT Command: AT+TDC**
116 116  
117 117  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
... ... @@ -135,12 +135,14 @@
135 135  )))
136 136  
137 137  (((
138 -If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
137 +If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
139 139  )))
140 140  
141 -* **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
142 -* **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
140 +* **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
141 +* **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
143 143  
143 +
144 +
144 144  == 4.2 Reboot End Node ==
145 145  
146 146  
... ... @@ -149,10 +149,11 @@
149 149  
150 150  (% style="color:blue" %)**AT Command: ATZ**
151 151  
152 -(% border="1" style="background-color:#ffffcc; color:green; width:546px" %)
153 -|=(% colspan="3" style="width: 543px;" %)ATZ: Trig a reset of the MCU
154 -|(% style="width:157px" %)**Command Example**|(% style="width:92px" %)**Function**|(% style="width:294px" %)**Response**
155 -|(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
153 +
154 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
155 +|=(% colspan="3" %)ATZ: Trig a reset of the MCU
156 +|**Command Example**|**Function**|**Response**
157 +|ATZ|Reset MCU|(((
156 156  Device reset and show booting info
157 157  
158 158  LSN50 Device/LoRa ST Module
... ... @@ -166,6 +166,7 @@
166 166  <followed by the Tx and Rx information>
167 167  )))
168 168  
171 +
169 169  (% style="color:blue" %)**Downlink Command: 0x04**
170 170  
171 171  (((
... ... @@ -175,7 +175,6 @@
175 175  (((
176 176  If the downlink payload=**04FF**, the end node will reboot.
177 177  
178 -
179 179  
180 180  )))
181 181  
... ... @@ -184,13 +184,12 @@
184 184  
185 185  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
186 186  
187 -
188 188  (% style="color:blue" %)**AT Command: AT+FDR**
189 189  
190 -(% border="1" style="background-color:#ffffcc; color:green; width:789px" %)
191 -|=(% colspan="3" style="width: 786px;" %)Reset to factory default
192 -|(% style="width:154px" %)**Command Example**|(% style="width:175px" %)**Function**|(% style="width:456px" %)**Response**
193 -|(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
191 +(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
192 +|=(% colspan="3" style="width: 828px;" %)Reset to factory default
193 +|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
194 +|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
194 194  Device reset to factory default parameters and show booting info
195 195  
196 196  LSN50 Device/LoRa ST Module
... ... @@ -204,6 +204,7 @@
204 204  Please set the parameters or reset Device to apply change
205 205  )))
206 206  
208 +
207 207  (% style="color:blue" %)**Downlink Command: 0x04**
208 208  
209 209  (((
... ... @@ -215,7 +215,6 @@
215 215  )))
216 216  
217 217  
218 -
219 219  == 4.4 Show Firmware Version ==
220 220  
221 221  
... ... @@ -224,15 +224,17 @@
224 224  
225 225  (% style="color:blue" %)**AT Command: AT+VER**
226 226  
227 -(% border="1" style="background-color:#ffffcc; color:green; width:542px" %)
228 -|=(% colspan="3" style="width: 539px;" %)AT+VER: Image Version and Frequency Band
229 -|(% style="width:157px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:86px" %)**Response**
230 -|(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
228 +
229 +(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
230 +|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
231 +|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
232 +|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
231 231  1.3 EU868
232 232  
233 233  OK
234 234  )))
235 235  
238 +
236 236  (% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
237 237  
238 238  (((
... ... @@ -257,6 +257,7 @@
257 257  (((
258 258  
259 259  
263 +
260 260  **yy: Frequency Band:**
261 261  )))
262 262  
... ... @@ -274,6 +274,7 @@
274 274  (((
275 275  
276 276  
281 +
277 277  **zz: Subband**
278 278  )))
279 279  
... ... @@ -280,15 +280,14 @@
280 280  firmware version: v1.1.0 ~-~-> 110
281 281  
282 282  
283 -
284 284  == 4.5 Show System Configure ==
285 285  
286 -
287 287  Feature: Show All configure. No downlink command yet.
288 288  
289 289  
290 290  (% style="color:blue" %)**AT Command: AT+CFG**
291 291  
295 +
292 292  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
293 293  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
294 294  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -310,12 +310,12 @@
310 310  
311 311  == 5.1 Application EUI ==
312 312  
313 -
314 314  Feature: Get or Set the Application EUI.
315 315  
316 316  
317 317  (% style="color:blue" %)**AT Command: AT+APPEUI**
318 318  
322 +
319 319  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
320 320  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
321 321  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -326,12 +326,12 @@
326 326  
327 327  == 5.2 Application Key ==
328 328  
329 -
330 330  Feature: Get or Set the Application Key.
331 331  
332 332  
333 333  (% style="color:blue" %)**AT Command: AT+APPKEY**
334 334  
338 +
335 335  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
336 336  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
337 337  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -342,12 +342,12 @@
342 342  
343 343  == 5.3 Application Session Key ==
344 344  
345 -
346 346  Feature: Get or Set the Application Session Key.
347 347  
348 348  
349 349  (% style="color:blue" %)**AT Command: AT+APPSKEY**
350 350  
354 +
351 351  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
352 352  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
353 353  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -360,12 +360,12 @@
360 360  
361 361  == 5.4 Device Address ==
362 362  
363 -
364 364  Feature: Get or Set the Device Address.
365 365  
366 366  
367 367  (% style="color:blue" %)**AT Command: AT+DADDR**
368 368  
372 +
369 369  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
370 370  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
371 371  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -378,12 +378,12 @@
378 378  
379 379  == 5.5 Device EUI ==
380 380  
381 -
382 382  Feature: Get or Set the Device EUI.
383 383  
384 384  
385 385  (% style="color:blue" %)**AT Command: AT+DEUI**
386 386  
390 +
387 387  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
388 388  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
389 389  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -396,12 +396,12 @@
396 396  
397 397  == 5.6 Network ID ==
398 398  
399 -
400 400  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
401 401  
402 402  
403 403  (% style="color:blue" %)**AT Command: AT+NWKID**
404 404  
408 +
405 405  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
406 406  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
407 407  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -412,12 +412,12 @@
412 412  
413 413  == 5.7 Network Session Key ==
414 414  
415 -
416 416  Feature: Get or Set the Network Session Key
417 417  
418 418  
419 419  (% style="color:blue" %)**AT Command: AT+NWKSKEY**
420 420  
424 +
421 421  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
422 422  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
423 423  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -430,14 +430,14 @@
430 430  
431 431  == 6.1 Confirm Mode ==
432 432  
433 -=== 6.1.1  AT+CFM command before DR-LWS007 software stack ===
437 +=== AT+CFM command before DR-LWS007 software stack ===
434 434  
435 -
436 436  Feature: Get or Set the confirmation mode (0-1).
437 437  
438 438  
439 439  (% style="color:blue" %)**AT Command: AT+CFM**
440 440  
444 +
441 441  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
442 442  |=(% colspan="3" style="width: 707px;" %)AT+CFM
443 443  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -453,14 +453,15 @@
453 453  
454 454  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
455 455  
456 -* **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
457 -* **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
460 +* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
461 +* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
458 458  
459 -=== 6.1.2  AT+CFM command since DR-LWS007 software stack ===
463 +=== AT+CFM command since DR-LWS007 software stack ===
460 460  
461 461  
462 462  (% style="color:blue" %)**AT Command: AT+CFM**
463 463  
468 +
464 464  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
465 465  |=(% colspan="3" style="width: 707px;" %)AT+CFM
466 466  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -494,21 +494,22 @@
494 494  
495 495  (% style="color:blue" %)**Downlink Command: 0x05**
496 496  
502 +
497 497  Format: Command Code (0x05) followed by 2 bytes mode value.
498 498  
499 499  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
500 500  
501 -* **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
502 -* **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
507 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
508 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
503 503  
504 504  == 6.2 Confirm Status ==
505 505  
506 -
507 507  Feature: Get confirmation status of the last AT+SEND (0-1).
508 508  
509 509  
510 510  (% style="color:blue" %)**AT Command: AT+CFS**
511 511  
517 +
512 512  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
513 513  |=(% colspan="3" style="width: 531px;" %)AT+CFS
514 514  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -518,12 +518,12 @@
518 518  
519 519  == 6.3 Join LoRa® Network ==
520 520  
521 -
522 522  Feature: Join network.
523 523  
524 524  
525 525  (% style="color:blue" %)**AT Command: AT+JOIN**
526 526  
532 +
527 527  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
528 528  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
529 529  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -535,12 +535,12 @@
535 535  
536 536  == 6.4 LoRa® Network Join Mode ==
537 537  
538 -
539 539  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
540 540  
541 541  
542 542  (% style="color:blue" %)**AT Command: AT+NJM**
543 543  
549 +
544 544  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
545 545  |=(% colspan="3" style="width: 750px;" %)AT+NJM
546 546  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -552,21 +552,22 @@
552 552  
553 553  (% style="color:blue" %)**Downlink Command: 0x20**
554 554  
561 +
555 555  Format: Command Code (0x20) followed by 1 bytes mode value.
556 556  
557 557  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
558 558  
559 -* **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
560 -* **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
566 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
567 +* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
561 561  
562 562  == 6.5 LoRa® Network Join Status ==
563 563  
564 -
565 565  Feature: LoRa® Network Join Status.
566 566  
567 567  
568 568  (% style="color:blue" %)**AT Command: AT+NJS**
569 569  
576 +
570 570  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
571 571  |=(% colspan="3" style="width: 495px;" %)AT+NJS
572 572  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -576,12 +576,12 @@
576 576  
577 577  == 6.6 Print Last Received Data in Raw Format ==
578 578  
579 -
580 580  Feature: Print Last Received Data in Raw Format<port:data>.
581 581  
582 582  
583 583  (% style="color:blue" %)**AT Command: AT+RECV**
584 584  
591 +
585 585  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
586 586  |=(% colspan="3" style="width: 584px;" %)AT+RECV
587 587  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -591,12 +591,12 @@
591 591  
592 592  == 6.7 Print Last Received Data in Binary Format ==
593 593  
594 -
595 595  Feature: Print Last Received Data in Binary Format<port:data>.
596 596  
597 597  
598 598  (% style="color:blue" %)**AT Command: AT+RECVB**
599 599  
606 +
600 600  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
601 601  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
602 602  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -606,12 +606,12 @@
606 606  
607 607  == 6.8 Send Text Data ==
608 608  
609 -
610 610  Feature: Send Text Data<port:data>.
611 611  
612 612  
613 613  (% style="color:blue" %)**AT Command: AT+SEND**
614 614  
621 +
615 615  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
616 616  |=(% colspan="3" style="width: 988px;" %)AT+SEND
617 617  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -625,17 +625,17 @@
625 625  
626 626  == 6.9 Send Hexadecimal Data ==
627 627  
628 -
629 629  Feature: Send hexadecimal data along with the application port.
630 630  
631 631  
632 632  (% style="color:blue" %)**AT Command: AT+SENDB**
633 633  
634 -(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
635 -|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
636 -|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
637 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
638 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
640 +
641 +(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
642 +|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
643 +|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
644 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
645 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
639 639  AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
640 640  
641 641  
... ... @@ -645,12 +645,12 @@
645 645  
646 646  == 7.1 Adaptive Data Rate ==
647 647  
648 -
649 649  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
650 650  
651 651  
652 652  (% style="color:blue" %)**AT Command: AT+ADR**
653 653  
660 +
654 654  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
655 655  |=(% colspan="3" style="width: 680px;" %)AT+ADR
656 656  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -664,19 +664,21 @@
664 664  
665 665  (% style="color:blue" %)**Downlink Command: 0x22**
666 666  
674 +
675 +
667 667  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
668 668  
669 -* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
670 -* **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
678 +* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
679 +* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
671 671  
672 672  == 7.2 LoRa® Class ==
673 673  
674 -
675 675  Feature: Get or Set the Device Class(Currently only support class A, class C).
676 676  
677 677  
678 -(% style="color:blue" %)**AT Command:  AT+CLASS**
686 +(% style="color:blue" %)**AT Command:AT+CLASS**
679 679  
688 +
680 680  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
681 681  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
682 682  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -689,11 +689,11 @@
689 689  
690 690  == 7.3 Duty Cycle Setting ==
691 691  
701 +Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
692 692  
693 -Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
694 694  
704 +(% style="color:blue" %)**AT Command:AT+DCS**
695 695  
696 -(% style="color:blue" %)**AT Command:  AT+DCS**
697 697  
698 698  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
699 699  |=(% colspan="3" style="width: 512px;" %)AT+DCS
... ... @@ -707,17 +707,12 @@
707 707  
708 708  == 7.4 Data Rate ==
709 709  
719 +Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
710 710  
711 -Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
712 712  
713 -(% style="color:red" %)
714 -**Notice:**
715 -
716 -* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
717 -* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
718 -
719 719  (% style="color:blue" %)**AT Command: AT+DR**
720 720  
724 +
721 721  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
722 722  |=(% colspan="3" style="width: 463px;" %)AT+DR
723 723  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -730,19 +730,21 @@
730 730  
731 731  (% style="color:blue" %)**Downlink Command: 0x2200aaFF**
732 732  
737 +
738 +
733 733  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
734 734  
735 -* **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
736 -* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
741 +* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
742 +* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
737 737  
738 738  == 7.5 Frame Counter Downlink ==
739 739  
740 -
741 741  Feature: Get or Set the Frame Counter Downlink.
742 742  
743 743  
744 -(% style="color:blue" %)**AT Command:  AT+FCD**
749 +(% style="color:blue" %)**AT Command:AT+FCD**
745 745  
751 +
746 746  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
747 747  |=(% colspan="3" style="width: 690px;" %)AT+FCD
748 748  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -751,6 +751,8 @@
751 751  )))
752 752  |(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
753 753  OK
760 +
761 +
754 754  )))
755 755  
756 756  == 7.6 Frame Counter Uplink ==
... ... @@ -758,8 +758,9 @@
758 758  Feature: Get or Set the Frame Counter Uplink.
759 759  
760 760  
761 -(% style="color:blue" %)**AT Command:  AT+FCU**
769 +(% style="color:blue" %)**AT Command:AT+FCU**
762 762  
771 +
763 763  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
764 764  |=(% colspan="3" style="width: 531px;" %)AT+FCU
765 765  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -772,12 +772,12 @@
772 772  
773 773  == 7.7 Join Accept Delay1 ==
774 774  
775 -
776 776  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
777 777  
778 778  
779 -(% style="color:blue" %)**AT Command:  AT+JN1DL**
787 +(% style="color:blue" %)**AT Command:AT+JN1DL**
780 780  
789 +
781 781  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
782 782  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
783 783  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -790,12 +790,12 @@
790 790  
791 791  == 7.8 Join Accept Delay2 ==
792 792  
793 -
794 794  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
795 795  
796 796  
797 -(% style="color:blue" %)**AT Command:  AT+JN2DL**
805 +(% style="color:blue" %)**AT Command:AT+JN2DL**
798 798  
807 +
799 799  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
800 800  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
801 801  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -808,14 +808,14 @@
808 808  
809 809  == 7.9 Public Network Mode ==
810 810  
811 -
812 812  Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
813 813  
814 -(% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
822 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
815 815  
816 816  
817 -(% style="color:blue" %)**AT Command:  AT+PNM**
825 +(% style="color:blue" %)**AT Command:AT+PNM**
818 818  
827 +
819 819  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
820 820  |=(% colspan="3" style="width: 664px;" %)AT+PNM
821 821  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -835,12 +835,12 @@
835 835  
836 836  == 7.10 Receive Delay1 ==
837 837  
838 -
839 839  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
840 840  
841 841  
842 -(% style="color:blue" %)**AT Command: AT+RX1DL**
850 +(% style="color:blue" %)**AT Command:AT+RX1DL**
843 843  
852 +
844 844  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
845 845  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
846 846  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -853,12 +853,12 @@
853 853  
854 854  == 7.11 Receive Delay2 ==
855 855  
856 -
857 857  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
858 858  
859 859  
860 -(% style="color:blue" %)**AT Command: AT+RX2DL**
868 +(% style="color:blue" %)**AT Command:AT+RX2DL**
861 861  
870 +
862 862  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
863 863  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
864 864  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -871,12 +871,12 @@
871 871  
872 872  == 7.12 Rx2 Window Data Rate ==
873 873  
874 -
875 875  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
876 876  
877 877  
878 -(% style="color:blue" %)**AT Command:  AT+RX2DR**
886 +(% style="color:blue" %)**AT Command:AT+RX2DR**
879 879  
888 +
880 880  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
881 881  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
882 882  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -889,12 +889,12 @@
889 889  
890 890  == 7.13 Rx2 Window Frequency ==
891 891  
892 -
893 893  Feature: Get or Set the Rx2 window frequency
894 894  
895 895  
896 -(% style="color:blue" %)**AT Command:  AT+RX2FQ**
904 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
897 897  
906 +
898 898  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
899 899  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
900 900  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -907,13 +907,11 @@
907 907  
908 908  == 7.14 Transmit Power ==
909 909  
910 -
911 911  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
912 912  
913 -(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
914 914  
922 +(% style="color:blue" %)**AT Command:AT+TXP**
915 915  
916 -(% style="color:blue" %)**AT Command:  AT+TXP**
917 917  
918 918  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
919 919  |=(% colspan="3" style="width: 462px;" %)AT+TXP
... ... @@ -929,17 +929,17 @@
929 929  
930 930  If the downlink payload=22000100, it means setting the TXP to 0.
931 931  
932 -* **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
933 -* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+TXP=0.
939 +* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
940 +* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
934 934  
935 935  == 7.15 RSSI of the Last Received Packet ==
936 936  
937 -
938 938  Feature: Get or Set the Rx2 window frequency
939 939  
940 940  
941 941  (% style="color:blue" %)**AT Command:AT+RSSI**
942 942  
949 +
943 943  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
944 944  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
945 945  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -949,12 +949,12 @@
949 949  
950 950  == 7.16 SNR of the Last Received Packet ==
951 951  
952 -
953 953  Feature: Get the SNR of the last received packet
954 954  
955 955  
956 -(% style="color:blue" %)**AT Command:  AT+SNR**
962 +(% style="color:blue" %)**AT Command:AT+SNR**
957 957  
964 +
958 958  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
959 959  |=(% colspan="3" style="width: 568px;" %)AT+SNR
960 960  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -964,12 +964,12 @@
964 964  
965 965  == 7.17 Application Port ==
966 966  
967 -
968 968  Feature: Get or set the application port.
969 969  
970 970  
971 971  (% style="color:blue" %)**AT Command: AT+PORT**
972 972  
979 +
973 973  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
974 974  |=(% colspan="3" style="width: 497px;" %)AT+PORT
975 975  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
... ... @@ -980,21 +980,22 @@
980 980  
981 981  (% style="color:blue" %)**Downlink Command: 0x23**
982 982  
990 +
983 983  Format: Command Code (0x23) followed by 1 bytes port value.
984 984  
985 985  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
986 986  
987 -* **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
988 -* **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
995 +* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
996 +* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
989 989  
990 990  == 7.18 Single Channel Mode ==
991 991  
992 -
993 993  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
994 994  
995 995  
996 996  (% style="color:blue" %)**AT Command: AT+CHS**
997 997  
1005 +
998 998  (% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
999 999  |=(% colspan="3" style="width: 600px;" %)AT+CHS
1000 1000  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -1005,12 +1005,12 @@
1005 1005  
1006 1006  == 7.19 Eight Channel Mode ==
1007 1007  
1008 -
1009 1009  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1010 1010  
1011 1011  
1012 1012  (% style="color:blue" %)**AT Command: AT+CHE**
1013 1013  
1021 +
1014 1014  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1015 1015  |=(% colspan="3" style="width: 707px;" %)AT+CHE
1016 1016  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -1021,23 +1021,24 @@
1021 1021  )))
1022 1022  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1023 1023  
1024 -(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
1032 +(% style="color:blue" %)**Downlink Command: 0x24**
1025 1025  
1034 +
1026 1026  Format: Command Code (0x24) followed by 1 bytes channel value.
1027 1027  
1028 1028  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1029 1029  
1030 -* **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1031 -* **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1039 +* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1040 +* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
1032 1032  
1033 1033  == 7.20 Get or Set RXwindows1 timeout ==
1034 1034  
1044 +Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1035 1035  
1036 -Feature: Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1037 1037  
1038 -
1039 1039  (% style="color:blue" %)**AT Command: AT+RX1WTO**
1040 1040  
1049 +
1041 1041  (% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1042 1042  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1043 1043  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
... ... @@ -1047,32 +1047,25 @@
1047 1047  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1048 1048  
1049 1049  (((
1050 -
1051 -
1052 -
1053 -(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1054 -
1055 -
1059 +**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1056 1056  )))
1057 1057  
1058 1058  [[image:image-20220526162535-1.png]]
1059 1059  
1060 -
1061 1061  (((
1062 1062  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1063 1063  
1064 -
1065 1065  
1066 1066  )))
1067 1067  
1068 1068  == 7.21 Get or Set RXwindows2 timeout ==
1069 1069  
1072 +Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1070 1070  
1071 -Feature: Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1072 1072  
1073 -
1074 1074  (% style="color:blue" %)**AT Command: AT+RX2WTO**
1075 1075  
1077 +
1076 1076  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1077 1077  |=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1078 1078  |(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
... ... @@ -1083,12 +1083,12 @@
1083 1083  
1084 1084  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1085 1085  
1086 -
1087 1087  Feature: Get or Set uplinkdwelltime
1088 1088  
1089 1089  
1090 1090  (% style="color:blue" %)**AT Command: AT+DWELLT**
1091 1091  
1093 +
1092 1092  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1093 1093  |=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1094 1094  |(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
... ... @@ -1099,21 +1099,20 @@
1099 1099  
1100 1100  (% style="color:blue" %)**Downlink Command: 0x25**
1101 1101  
1104 +
1102 1102  Format: Command Code (0x25) followed by 1 bytes state value.
1103 1103  
1104 1104  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1105 1105  
1106 -* **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1107 -* **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1109 +* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1110 +* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1108 1108  
1109 1109  == 7.23 Set Packet Receiving Response Level ==
1110 1110  
1111 -
1112 1112  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1113 1113  
1116 +RPL value:
1114 1114  
1115 -**RPL value:**
1116 -
1117 1117  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1118 1118  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1119 1119  * **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
... ... @@ -1120,7 +1120,7 @@
1120 1120  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1121 1121  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1122 1122  
1123 -**Case Analyes:**
1124 +Case Analyes:
1124 1124  
1125 1125  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1126 1126  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
... ... @@ -1128,6 +1128,7 @@
1128 1128  
1129 1129  (% style="color:blue" %)**AT Command: AT+RPL**
1130 1130  
1132 +
1131 1131  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1132 1132  |=(% colspan="3" style="width: 533px;" %)AT+RPL
1133 1133  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
... ... @@ -1138,12 +1138,13 @@
1138 1138  
1139 1139  (% style="color:blue" %)**Downlink Command: 0x21**
1140 1140  
1143 +
1141 1141  Format: Command Code (0x21) followed by 1 bytes level value.
1142 1142  
1143 1143  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1144 1144  
1145 -* **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1146 -* **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1148 +* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1149 +* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1147 1147  
1148 1148  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1149 1149  
... ... @@ -1150,17 +1150,14 @@
1150 1150  
1151 1151  (% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1152 1152  
1153 -(% border="1" style="background-color:#ffffcc; color:green; width:589px" %)
1154 -|=(% colspan="3" style="width: 586px;" %)AT+**SETMAXNBTRANS**
1155 -|(% style="width:227px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:87px" %)**Response**
1156 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1156 +
1157 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1158 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1159 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1160 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1157 1157  OK
1158 1158  )))
1159 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1160 -value2: 0: uplink fcnt doesn't change for each NBTrans;
1161 -
1162 -1: uplink fcnt increase by 1 for each NBTrans.
1163 -)))|(% style="width:87px" %)(((
1163 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1164 1164  1
1165 1165  
1166 1166  OK
... ... @@ -1168,12 +1168,13 @@
1168 1168  
1169 1169  (% style="color:blue" %)**Downlink Command: 0x33**
1170 1170  
1171 +
1171 1171  Format: Command Code (0x33) followed by 2 bytes mode value.
1172 1172  
1173 1173  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1174 1174  
1175 -* Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1176 -* Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1176 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1177 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1177 1177  
1178 1178  == 7.25 Device offline rejoining （LWS007) ==
1179 1179  
... ... @@ -1180,6 +1180,7 @@
1180 1180  
1181 1181  (% style="color:blue" %)**AT Command: AT+DDETECT**
1182 1182  
1184 +
1183 1183  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1184 1184  |=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1185 1185  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -1213,11 +1213,12 @@
1213 1213  
1214 1214  (% style="color:blue" %)**Downlink Command: 0x33**
1215 1215  
1218 +
1216 1216  Format: Command Code (0x32) followed by 2 bytes mode value.
1217 1217  
1218 1218  If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1219 1219  
1220 -* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1223 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1221 1221  
1222 1222  == 7.26 Request the server to send an ACK ==
1223 1223  
... ... @@ -1224,6 +1224,7 @@
1224 1224  
1225 1225  (% style="color:blue" %)**AT Command: AT+PNACKMD**
1226 1226  
1230 +
1227 1227  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1228 1228  |=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1229 1229  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
... ... @@ -1241,6 +1241,7 @@
1241 1241  
1242 1242  (% style="color:blue" %)**AT Command: AT+RJTDC**
1243 1243  
1248 +
1244 1244  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1245 1245  |=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1246 1246  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
... ... @@ -1255,30 +1255,29 @@
1255 1255  
1256 1256  (% style="color:blue" %)**Downlink Command: 0x26**
1257 1257  
1263 +
1258 1258  Format: Command Code (0x26) followed by 2 bytes mode value.
1259 1259  
1260 1260  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1261 1261  
1262 -* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1263 -* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1268 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1269 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1264 1264  
1265 1265  = 8. AT Commands Combination =
1266 1266  
1267 1267  == 8.1 Set a fix RX2DR for downlink window ==
1268 1268  
1275 +* **AT+ADR=0 **~-~-> Disable ADR first
1276 +* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
1269 1269  
1270 -* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1271 -* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1272 -
1273 1273  == 8.2 Use Downlink Command to set a fix uplink DR ==
1274 1274  
1275 1275  
1276 1276  (% style="color:blue" %)**Downlink Command: 0x22000500**
1277 1277  
1278 -**Same as:**
1279 1279  
1280 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1281 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1282 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1284 +Same as:
1283 1283  
1284 -
1286 +* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1287 +* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1288 +* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0