Last modified by kai on 2024/09/06 10:00
<
From version < 57.1 >
edited by Edwin Chen
on 2022/10/21 10:47
To version < 50.16 >
edited by Xiaoling
on 2022/07/13 13:47
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -9,25 +9,25 @@
9 9  
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 -* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 -* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
12 +* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
13 +* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 15  (((
16 16  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17 17  
18 -
19 -
20 20  )))
21 21  
22 22  = 2. How to use AT Commands or Downlink command =
23 23  
24 24  
25 -* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
26 -* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
23 +* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 +* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
27 27  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
28 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
29 29  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
30 30  
29 +
30 +
31 31  = 3. Support End Node and firmware version =
32 32  
33 33  
... ... @@ -102,8 +102,10 @@
102 102  )))
103 103  )))
104 104  
105 +
105 105  = 4. System Management Commands =
106 106  
108 +
107 107  == 4.1 Change Uplink Interval ==
108 108  
109 109  
... ... @@ -133,12 +133,14 @@
133 133  )))
134 134  
135 135  (((
136 -If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
138 +If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
137 137  )))
138 138  
139 -* **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
140 -* **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
141 +* **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
142 +* **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
141 141  
144 +
145 +
142 142  == 4.2 Reboot End Node ==
143 143  
144 144  
... ... @@ -147,10 +147,10 @@
147 147  
148 148  (% style="color:blue" %)**AT Command: ATZ**
149 149  
150 -(% border="1" style="background-color:#ffffcc; color:green; width:546px" %)
151 -|=(% colspan="3" style="width: 543px;" %)ATZ: Trig a reset of the MCU
152 -|(% style="width:157px" %)**Command Example**|(% style="width:92px" %)**Function**|(% style="width:294px" %)**Response**
153 -|(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
154 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
155 +|=(% colspan="3" %)ATZ: Trig a reset of the MCU
156 +|**Command Example**|**Function**|**Response**
157 +|ATZ|Reset MCU|(((
154 154  Device reset and show booting info
155 155  
156 156  LSN50 Device/LoRa ST Module
... ... @@ -164,6 +164,7 @@
164 164  <followed by the Tx and Rx information>
165 165  )))
166 166  
171 +
167 167  (% style="color:blue" %)**Downlink Command: 0x04**
168 168  
169 169  (((
... ... @@ -173,7 +173,6 @@
173 173  (((
174 174  If the downlink payload=**04FF**, the end node will reboot.
175 175  
176 -
177 177  
178 178  )))
179 179  
... ... @@ -185,10 +185,10 @@
185 185  
186 186  (% style="color:blue" %)**AT Command: AT+FDR**
187 187  
188 -(% border="1" style="background-color:#ffffcc; color:green; width:789px" %)
189 -|=(% colspan="3" style="width: 786px;" %)Reset to factory default
190 -|(% style="width:154px" %)**Command Example**|(% style="width:175px" %)**Function**|(% style="width:456px" %)**Response**
191 -|(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
192 +(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
193 +|=(% colspan="3" style="width: 828px;" %)Reset to factory default
194 +|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
195 +|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
192 192  Device reset to factory default parameters and show booting info
193 193  
194 194  LSN50 Device/LoRa ST Module
... ... @@ -202,6 +202,7 @@
202 202  Please set the parameters or reset Device to apply change
203 203  )))
204 204  
209 +
205 205  (% style="color:blue" %)**Downlink Command: 0x04**
206 206  
207 207  (((
... ... @@ -213,7 +213,6 @@
213 213  )))
214 214  
215 215  
216 -
217 217  == 4.4 Show Firmware Version ==
218 218  
219 219  
... ... @@ -222,15 +222,16 @@
222 222  
223 223  (% style="color:blue" %)**AT Command: AT+VER**
224 224  
225 -(% border="1" style="background-color:#ffffcc; color:green; width:542px" %)
226 -|=(% colspan="3" style="width: 539px;" %)AT+VER: Image Version and Frequency Band
227 -|(% style="width:157px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:86px" %)**Response**
228 -|(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
229 +(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
230 +|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
231 +|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
232 +|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
229 229  1.3 EU868
230 230  
231 231  OK
232 232  )))
233 233  
238 +
234 234  (% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
235 235  
236 236  (((
... ... @@ -255,6 +255,7 @@
255 255  (((
256 256  
257 257  
263 +
258 258  **yy: Frequency Band:**
259 259  )))
260 260  
... ... @@ -272,6 +272,7 @@
272 272  (((
273 273  
274 274  
281 +
275 275  **zz: Subband**
276 276  )))
277 277  
... ... @@ -278,7 +278,6 @@
278 278  firmware version: v1.1.0 ~-~-> 110
279 279  
280 280  
281 -
282 282  == 4.5 Show System Configure ==
283 283  
284 284  
... ... @@ -304,8 +304,11 @@
304 304  OK
305 305  )))
306 306  
313 +
314 +
307 307  = 5. Keys, IDs and EUIs management =
308 308  
317 +
309 309  == 5.1 Application EUI ==
310 310  
311 311  
... ... @@ -322,6 +322,8 @@
322 322  )))
323 323  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
324 324  
334 +
335 +
325 325  == 5.2 Application Key ==
326 326  
327 327  
... ... @@ -338,6 +338,8 @@
338 338  )))
339 339  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
340 340  
352 +
353 +
341 341  == 5.3 Application Session Key ==
342 342  
343 343  
... ... @@ -356,6 +356,8 @@
356 356  OK
357 357  )))
358 358  
372 +
373 +
359 359  == 5.4 Device Address ==
360 360  
361 361  
... ... @@ -374,6 +374,8 @@
374 374  )))
375 375  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
376 376  
392 +
393 +
377 377  == 5.5 Device EUI ==
378 378  
379 379  
... ... @@ -392,6 +392,8 @@
392 392  OK
393 393  )))
394 394  
412 +
413 +
395 395  == 5.6 Network ID ==
396 396  
397 397  
... ... @@ -408,6 +408,8 @@
408 408  )))
409 409  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
410 410  
430 +
431 +
411 411  == 5.7 Network Session Key ==
412 412  
413 413  
... ... @@ -424,10 +424,14 @@
424 424  )))
425 425  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
426 426  
448 +
449 +
427 427  = 6. Joining and sending date on LoRaWAN network =
428 428  
452 +
429 429  == 6.1 Confirm Mode ==
430 430  
455 +
431 431  === 6.1.1  AT+CFM command before DR-LWS007 software stack ===
432 432  
433 433  
... ... @@ -445,6 +445,7 @@
445 445  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
446 446  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
447 447  
473 +
448 448  (% style="color:blue" %)**Downlink Command: 0x05**
449 449  
450 450  Format: Command Code (0x05) followed by 2 bytes mode value.
... ... @@ -451,9 +451,12 @@
451 451  
452 452  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
453 453  
454 -* **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
455 -* **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
480 +* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
481 +* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
456 456  
483 +
484 +
485 +
457 457  === 6.1.2  AT+CFM command since DR-LWS007 software stack ===
458 458  
459 459  
... ... @@ -490,6 +490,7 @@
490 490  OK
491 491  )))
492 492  
522 +
493 493  (% style="color:blue" %)**Downlink Command: 0x05**
494 494  
495 495  Format: Command Code (0x05) followed by 2 bytes mode value.
... ... @@ -496,9 +496,12 @@
496 496  
497 497  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
498 498  
499 -* **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
500 -* **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
529 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
530 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
501 501  
532 +
533 +
534 +
502 502  == 6.2 Confirm Status ==
503 503  
504 504  
... ... @@ -514,6 +514,8 @@
514 514  OK
515 515  )))
516 516  
550 +
551 +
517 517  == 6.3 Join LoRa® Network ==
518 518  
519 519  
... ... @@ -531,6 +531,8 @@
531 531  While Error in format, return AT_BUSY_ERROR
532 532  )))
533 533  
569 +
570 +
534 534  == 6.4 LoRa® Network Join Mode ==
535 535  
536 536  
... ... @@ -548,6 +548,7 @@
548 548  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
549 549  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
550 550  
588 +
551 551  (% style="color:blue" %)**Downlink Command: 0x20**
552 552  
553 553  Format: Command Code (0x20) followed by 1 bytes mode value.
... ... @@ -554,9 +554,12 @@
554 554  
555 555  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
556 556  
557 -* **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
558 -* **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
595 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
596 +* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
559 559  
598 +
599 +
600 +
560 560  == 6.5 LoRa® Network Join Status ==
561 561  
562 562  
... ... @@ -572,6 +572,8 @@
572 572  OK
573 573  )))
574 574  
616 +
617 +
575 575  == 6.6 Print Last Received Data in Raw Format ==
576 576  
577 577  
... ... @@ -587,6 +587,8 @@
587 587  OK
588 588  )))
589 589  
633 +
634 +
590 590  == 6.7 Print Last Received Data in Binary Format ==
591 591  
592 592  
... ... @@ -602,6 +602,8 @@
602 602  OK
603 603  )))
604 604  
650 +
651 +
605 605  == 6.8 Send Text Data ==
606 606  
607 607  
... ... @@ -621,6 +621,8 @@
621 621  
622 622  )))
623 623  
671 +
672 +
624 624  == 6.9 Send Hexadecimal Data ==
625 625  
626 626  
... ... @@ -629,18 +629,21 @@
629 629  
630 630  (% style="color:blue" %)**AT Command: AT+SENDB**
631 631  
632 -(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
633 -|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
634 -|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
635 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
636 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
681 +(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
682 +|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
683 +|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
684 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
685 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
637 637  AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
638 638  
639 639  
640 640  )))
641 641  
691 +
692 +
642 642  = 7. LoRaWAN network management =
643 643  
695 +
644 644  == 7.1 Adaptive Data Rate ==
645 645  
646 646  
... ... @@ -662,19 +662,21 @@
662 662  
663 663  (% style="color:blue" %)**Downlink Command: 0x22**
664 664  
717 +
718 +
665 665  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
666 666  
667 -* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
668 -* **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
721 +* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
722 +* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
669 669  
670 670  == 7.2 LoRa® Class ==
671 671  
672 -
673 673  Feature: Get or Set the Device Class(Currently only support class A, class C).
674 674  
675 675  
676 -(% style="color:blue" %)**AT Command:  AT+CLASS**
729 +(% style="color:blue" %)**AT Command:AT+CLASS**
677 677  
731 +
678 678  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
679 679  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
680 680  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -687,11 +687,11 @@
687 687  
688 688  == 7.3 Duty Cycle Setting ==
689 689  
744 +Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
690 690  
691 -Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
692 692  
747 +(% style="color:blue" %)**AT Command:AT+DCS**
693 693  
694 -(% style="color:blue" %)**AT Command:  AT+DCS**
695 695  
696 696  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
697 697  |=(% colspan="3" style="width: 512px;" %)AT+DCS
... ... @@ -705,17 +705,12 @@
705 705  
706 706  == 7.4 Data Rate ==
707 707  
762 +Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
708 708  
709 -Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
710 710  
711 -(% style="color:red" %)
712 -**Notice:**
713 -
714 -* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
715 -* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
716 -
717 717  (% style="color:blue" %)**AT Command: AT+DR**
718 718  
767 +
719 719  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
720 720  |=(% colspan="3" style="width: 463px;" %)AT+DR
721 721  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -728,19 +728,21 @@
728 728  
729 729  (% style="color:blue" %)**Downlink Command: 0x2200aaFF**
730 730  
780 +
781 +
731 731  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
732 732  
733 -* **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
734 -* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
784 +* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
785 +* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
735 735  
736 736  == 7.5 Frame Counter Downlink ==
737 737  
738 -
739 739  Feature: Get or Set the Frame Counter Downlink.
740 740  
741 741  
742 -(% style="color:blue" %)**AT Command:  AT+FCD**
792 +(% style="color:blue" %)**AT Command:AT+FCD**
743 743  
794 +
744 744  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
745 745  |=(% colspan="3" style="width: 690px;" %)AT+FCD
746 746  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -749,6 +749,8 @@
749 749  )))
750 750  |(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
751 751  OK
803 +
804 +
752 752  )))
753 753  
754 754  == 7.6 Frame Counter Uplink ==
... ... @@ -756,8 +756,9 @@
756 756  Feature: Get or Set the Frame Counter Uplink.
757 757  
758 758  
759 -(% style="color:blue" %)**AT Command:  AT+FCU**
812 +(% style="color:blue" %)**AT Command:AT+FCU**
760 760  
814 +
761 761  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
762 762  |=(% colspan="3" style="width: 531px;" %)AT+FCU
763 763  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -770,12 +770,12 @@
770 770  
771 771  == 7.7 Join Accept Delay1 ==
772 772  
773 -
774 774  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
775 775  
776 776  
777 -(% style="color:blue" %)**AT Command:  AT+JN1DL**
830 +(% style="color:blue" %)**AT Command:AT+JN1DL**
778 778  
832 +
779 779  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
780 780  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
781 781  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -788,12 +788,12 @@
788 788  
789 789  == 7.8 Join Accept Delay2 ==
790 790  
791 -
792 792  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
793 793  
794 794  
795 -(% style="color:blue" %)**AT Command:  AT+JN2DL**
848 +(% style="color:blue" %)**AT Command:AT+JN2DL**
796 796  
850 +
797 797  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
798 798  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
799 799  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -806,14 +806,14 @@
806 806  
807 807  == 7.9 Public Network Mode ==
808 808  
809 -
810 810  Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
811 811  
812 -(% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
865 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
813 813  
814 814  
815 -(% style="color:blue" %)**AT Command:  AT+PNM**
868 +(% style="color:blue" %)**AT Command:AT+PNM**
816 816  
870 +
817 817  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
818 818  |=(% colspan="3" style="width: 664px;" %)AT+PNM
819 819  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -833,12 +833,12 @@
833 833  
834 834  == 7.10 Receive Delay1 ==
835 835  
836 -
837 837  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
838 838  
839 839  
840 -(% style="color:blue" %)**AT Command: AT+RX1DL**
893 +(% style="color:blue" %)**AT Command:AT+RX1DL**
841 841  
895 +
842 842  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
843 843  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
844 844  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -851,12 +851,12 @@
851 851  
852 852  == 7.11 Receive Delay2 ==
853 853  
854 -
855 855  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
856 856  
857 857  
858 -(% style="color:blue" %)**AT Command: AT+RX2DL**
911 +(% style="color:blue" %)**AT Command:AT+RX2DL**
859 859  
913 +
860 860  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
861 861  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
862 862  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -869,12 +869,12 @@
869 869  
870 870  == 7.12 Rx2 Window Data Rate ==
871 871  
872 -
873 873  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
874 874  
875 875  
876 -(% style="color:blue" %)**AT Command:  AT+RX2DR**
929 +(% style="color:blue" %)**AT Command:AT+RX2DR**
877 877  
931 +
878 878  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
879 879  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
880 880  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -887,12 +887,12 @@
887 887  
888 888  == 7.13 Rx2 Window Frequency ==
889 889  
890 -
891 891  Feature: Get or Set the Rx2 window frequency
892 892  
893 893  
894 -(% style="color:blue" %)**AT Command:  AT+RX2FQ**
947 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
895 895  
949 +
896 896  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
897 897  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
898 898  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -905,13 +905,11 @@
905 905  
906 906  == 7.14 Transmit Power ==
907 907  
908 -
909 909  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
910 910  
911 -(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
912 912  
965 +(% style="color:blue" %)**AT Command:AT+TXP**
913 913  
914 -(% style="color:blue" %)**AT Command:  AT+TXP**
915 915  
916 916  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
917 917  |=(% colspan="3" style="width: 462px;" %)AT+TXP
... ... @@ -927,17 +927,17 @@
927 927  
928 928  If the downlink payload=22000100, it means setting the TXP to 0.
929 929  
930 -* **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
931 -* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+TXP=0.
982 +* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
983 +* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
932 932  
933 933  == 7.15 RSSI of the Last Received Packet ==
934 934  
935 -
936 936  Feature: Get or Set the Rx2 window frequency
937 937  
938 938  
939 939  (% style="color:blue" %)**AT Command:AT+RSSI**
940 940  
992 +
941 941  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
942 942  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
943 943  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -947,12 +947,12 @@
947 947  
948 948  == 7.16 SNR of the Last Received Packet ==
949 949  
950 -
951 951  Feature: Get the SNR of the last received packet
952 952  
953 953  
954 -(% style="color:blue" %)**AT Command:  AT+SNR**
1005 +(% style="color:blue" %)**AT Command:AT+SNR**
955 955  
1007 +
956 956  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
957 957  |=(% colspan="3" style="width: 568px;" %)AT+SNR
958 958  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -962,12 +962,12 @@
962 962  
963 963  == 7.17 Application Port ==
964 964  
965 -
966 966  Feature: Get or set the application port.
967 967  
968 968  
969 969  (% style="color:blue" %)**AT Command: AT+PORT**
970 970  
1022 +
971 971  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
972 972  |=(% colspan="3" style="width: 497px;" %)AT+PORT
973 973  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
... ... @@ -978,21 +978,22 @@
978 978  
979 979  (% style="color:blue" %)**Downlink Command: 0x23**
980 980  
1033 +
981 981  Format: Command Code (0x23) followed by 1 bytes port value.
982 982  
983 983  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
984 984  
985 -* **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
986 -* **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1038 +* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
1039 +* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
987 987  
988 988  == 7.18 Single Channel Mode ==
989 989  
990 -
991 991  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
992 992  
993 993  
994 994  (% style="color:blue" %)**AT Command: AT+CHS**
995 995  
1048 +
996 996  (% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
997 997  |=(% colspan="3" style="width: 600px;" %)AT+CHS
998 998  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -1003,12 +1003,12 @@
1003 1003  
1004 1004  == 7.19 Eight Channel Mode ==
1005 1005  
1006 -
1007 1007  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1008 1008  
1009 1009  
1010 1010  (% style="color:blue" %)**AT Command: AT+CHE**
1011 1011  
1064 +
1012 1012  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1013 1013  |=(% colspan="3" style="width: 707px;" %)AT+CHE
1014 1014  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -1021,21 +1021,22 @@
1021 1021  
1022 1022  (% style="color:blue" %)**Downlink Command: 0x24**
1023 1023  
1077 +
1024 1024  Format: Command Code (0x24) followed by 1 bytes channel value.
1025 1025  
1026 1026  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1027 1027  
1028 -* **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1029 -* **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1082 +* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1083 +* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
1030 1030  
1031 1031  == 7.20 Get or Set RXwindows1 timeout ==
1032 1032  
1087 +Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1033 1033  
1034 -Feature: Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1035 1035  
1036 -
1037 1037  (% style="color:blue" %)**AT Command: AT+RX1WTO**
1038 1038  
1092 +
1039 1039  (% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1040 1040  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1041 1041  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
... ... @@ -1045,32 +1045,25 @@
1045 1045  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1046 1046  
1047 1047  (((
1048 -
1049 -
1050 -
1051 -(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1052 -
1053 -
1102 +**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1054 1054  )))
1055 1055  
1056 1056  [[image:image-20220526162535-1.png]]
1057 1057  
1058 -
1059 1059  (((
1060 1060  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1061 1061  
1062 -
1063 1063  
1064 1064  )))
1065 1065  
1066 1066  == 7.21 Get or Set RXwindows2 timeout ==
1067 1067  
1115 +Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1068 1068  
1069 -Feature: Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1070 1070  
1071 -
1072 1072  (% style="color:blue" %)**AT Command: AT+RX2WTO**
1073 1073  
1120 +
1074 1074  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1075 1075  |=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1076 1076  |(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
... ... @@ -1081,12 +1081,12 @@
1081 1081  
1082 1082  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1083 1083  
1084 -
1085 1085  Feature: Get or Set uplinkdwelltime
1086 1086  
1087 1087  
1088 1088  (% style="color:blue" %)**AT Command: AT+DWELLT**
1089 1089  
1136 +
1090 1090  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1091 1091  |=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1092 1092  |(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
... ... @@ -1097,21 +1097,20 @@
1097 1097  
1098 1098  (% style="color:blue" %)**Downlink Command: 0x25**
1099 1099  
1147 +
1100 1100  Format: Command Code (0x25) followed by 1 bytes state value.
1101 1101  
1102 1102  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1103 1103  
1104 -* **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1105 -* **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1152 +* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1153 +* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1106 1106  
1107 1107  == 7.23 Set Packet Receiving Response Level ==
1108 1108  
1109 -
1110 1110  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1111 1111  
1159 +RPL value:
1112 1112  
1113 -**RPL value:**
1114 -
1115 1115  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1116 1116  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1117 1117  * **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
... ... @@ -1118,7 +1118,7 @@
1118 1118  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1119 1119  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1120 1120  
1121 -**Case Analyes:**
1167 +Case Analyes:
1122 1122  
1123 1123  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1124 1124  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
... ... @@ -1126,6 +1126,7 @@
1126 1126  
1127 1127  (% style="color:blue" %)**AT Command: AT+RPL**
1128 1128  
1175 +
1129 1129  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1130 1130  |=(% colspan="3" style="width: 533px;" %)AT+RPL
1131 1131  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
... ... @@ -1136,12 +1136,13 @@
1136 1136  
1137 1137  (% style="color:blue" %)**Downlink Command: 0x21**
1138 1138  
1186 +
1139 1139  Format: Command Code (0x21) followed by 1 bytes level value.
1140 1140  
1141 1141  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1142 1142  
1143 -* **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1144 -* **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1191 +* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1192 +* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1145 1145  
1146 1146  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1147 1147  
... ... @@ -1148,17 +1148,14 @@
1148 1148  
1149 1149  (% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1150 1150  
1151 -(% border="1" style="background-color:#ffffcc; color:green; width:589px" %)
1152 -|=(% colspan="3" style="width: 586px;" %)AT+**SETMAXNBTRANS**
1153 -|(% style="width:227px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:87px" %)**Response**
1154 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1199 +
1200 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1201 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1202 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1203 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1155 1155  OK
1156 1156  )))
1157 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1158 -value2: 0: uplink fcnt doesn't change for each NBTrans;
1159 -
1160 -1: uplink fcnt increase by 1 for each NBTrans.
1161 -)))|(% style="width:87px" %)(((
1206 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1162 1162  1
1163 1163  
1164 1164  OK
... ... @@ -1166,12 +1166,13 @@
1166 1166  
1167 1167  (% style="color:blue" %)**Downlink Command: 0x33**
1168 1168  
1214 +
1169 1169  Format: Command Code (0x33) followed by 2 bytes mode value.
1170 1170  
1171 1171  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1172 1172  
1173 -* Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1174 -* Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1219 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1220 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1175 1175  
1176 1176  == 7.25 Device offline rejoining （LWS007) ==
1177 1177  
... ... @@ -1178,6 +1178,7 @@
1178 1178  
1179 1179  (% style="color:blue" %)**AT Command: AT+DDETECT**
1180 1180  
1227 +
1181 1181  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1182 1182  |=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1183 1183  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -1211,11 +1211,12 @@
1211 1211  
1212 1212  (% style="color:blue" %)**Downlink Command: 0x33**
1213 1213  
1261 +
1214 1214  Format: Command Code (0x32) followed by 2 bytes mode value.
1215 1215  
1216 1216  If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1217 1217  
1218 -* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1266 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1219 1219  
1220 1220  == 7.26 Request the server to send an ACK ==
1221 1221  
... ... @@ -1222,6 +1222,7 @@
1222 1222  
1223 1223  (% style="color:blue" %)**AT Command: AT+PNACKMD**
1224 1224  
1273 +
1225 1225  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1226 1226  |=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1227 1227  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
... ... @@ -1239,6 +1239,7 @@
1239 1239  
1240 1240  (% style="color:blue" %)**AT Command: AT+RJTDC**
1241 1241  
1291 +
1242 1242  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1243 1243  |=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1244 1244  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
... ... @@ -1253,30 +1253,29 @@
1253 1253  
1254 1254  (% style="color:blue" %)**Downlink Command: 0x26**
1255 1255  
1306 +
1256 1256  Format: Command Code (0x26) followed by 2 bytes mode value.
1257 1257  
1258 1258  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1259 1259  
1260 -* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1261 -* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1311 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1312 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1262 1262  
1263 1263  = 8. AT Commands Combination =
1264 1264  
1265 1265  == 8.1 Set a fix RX2DR for downlink window ==
1266 1266  
1318 +* **AT+ADR=0 **~-~-> Disable ADR first
1319 +* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
1267 1267  
1268 -* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1269 -* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1270 -
1271 1271  == 8.2 Use Downlink Command to set a fix uplink DR ==
1272 1272  
1273 1273  
1274 1274  (% style="color:blue" %)**Downlink Command: 0x22000500**
1275 1275  
1276 -**Same as:**
1277 1277  
1278 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1279 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1280 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1327 +Same as:
1281 1281  
1282 -
1329 +* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1330 +* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1331 +* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0