Last modified by kai on 2024/09/06 10:00
<
From version < 55.1 >
edited by Edwin Chen
on 2022/10/16 07:43
To version < 63.37 >
edited by Xiaoling
on 2023/05/29 14:22
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -14,36 +14,31 @@
14 14  
15 15  (((
16 16  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17 -
18 -
19 -
20 20  )))
21 21  
19 +
22 22  = 2. How to use AT Commands or Downlink command =
23 23  
24 24  
25 -* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
26 -* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 +* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 +* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
27 27  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
28 28  ** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
29 29  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
30 30  
29 +(% style="display:none" %) (%%)
31 31  
32 32  = 3. Support End Node and firmware version =
33 33  
34 34  
35 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
36 -|=(% colspan="3" style="width: 963px;" %)(((
37 37  Dragino STM32 base hardware Firmware / LoRaWAN stack list
38 -)))
35 +
36 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:966px" %)
37 +|(% style="background-color:#4f81bd; color:white; width:187px" %)(((
38 +**Model**)))|(% style="background-color:#4f81bd; color:white; width:330px" %)(((
39 +**Description**)))|(% style="background-color:#4f81bd; color:white; width:445px" %)(((
40 +**Firmware Version <~-~-> Stack Version**)))
39 39  |(% style="width:187px" %)(((
40 -**Model**
41 -)))|(% style="width:330px" %)(((
42 -**Description**
43 -)))|(% style="width:445px" %)(((
44 -**Firmware Version <~-~-> Stack Version**
45 -)))
46 -|(% style="width:187px" %)(((
47 47  [[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
48 48  )))|(% style="width:330px" %)(((
49 49  Open Source Generic LoRaWAN Sensor Node
... ... @@ -103,6 +103,7 @@
103 103  )))
104 104  )))
105 105  
101 +(% style="display:none" %) (%%)
106 106  
107 107  = 4. System Management Commands =
108 108  
... ... @@ -114,9 +114,8 @@
114 114  
115 115  (% style="color:blue" %)**AT Command: AT+TDC**
116 116  
117 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
118 -|=(% colspan="3" style="width: 724px;" %)AT+TDC
119 -|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
113 +(% border="1" style="background-color:#f2f2f2; width:727.222px" %)
114 +|(% style="background-color:#4F81BD;color:white; width:165px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:227px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:329px" %)**Response**
120 120  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
121 121  OK
122 122  
... ... @@ -141,6 +141,7 @@
141 141  * **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
142 142  * **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
143 143  
139 +(% style="display:none" %) (%%)
144 144  
145 145  == 4.2 Reboot End Node ==
146 146  
... ... @@ -150,9 +150,9 @@
150 150  
151 151  (% style="color:blue" %)**AT Command: ATZ**
152 152  
153 -(% border="1" style="background-color:#ffffcc; color:green; width:546px" %)
154 -|=(% colspan="3" style="width: 543px;" %)ATZ: Trig a reset of the MCU
155 -|(% style="width:157px" %)**Command Example**|(% style="width:92px" %)**Function**|(% style="width:294px" %)**Response**
149 +(% border="1" style="background-color:#f2f2f2; width:546px" %)
150 +|=(% colspan="3" style="width: 543px;background-color:#D9E2F3;color:#0070C0" %)ATZ: Trig a reset of the MCU
151 +|(% style="color:#0070c0; width:157px" %)**Command Example**|(% style="color:#0070c0; width:92px" %)**Function**|(% style="color:#0070c0; width:294px" %)**Response**
156 156  |(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
157 157  Device reset and show booting info
158 158  
... ... @@ -174,12 +174,10 @@
174 174  )))
175 175  
176 176  (((
177 -If the downlink payload=**04FF**, the end node will reboot.
178 -
179 -
180 -
173 +If the downlink payload=**04FF**, the end node will reboot.
181 181  )))
182 182  
176 +
183 183  == 4.3 Reset to factory Default ==
184 184  
185 185  
... ... @@ -188,9 +188,9 @@
188 188  
189 189  (% style="color:blue" %)**AT Command: AT+FDR**
190 190  
191 -(% border="1" style="background-color:#ffffcc; color:green; width:789px" %)
192 -|=(% colspan="3" style="width: 786px;" %)Reset to factory default
193 -|(% style="width:154px" %)**Command Example**|(% style="width:175px" %)**Function**|(% style="width:456px" %)**Response**
185 +(% border="1" style="background-color:#f2f2f2; width:789px" %)
186 +|=(% colspan="3" style="width: 786px;background-color:#D9E2F3;color:#0070C0" %)Reset to factory default
187 +|(% style="color:#0070c0; width:154px" %)**Command Example**|(% style="color:#0070c0; width:175px" %)**Function**|(% style="color:#0070c0; width:456px" %)**Response**
194 194  |(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
195 195  Device reset to factory default parameters and show booting info
196 196  
... ... @@ -216,7 +216,6 @@
216 216  )))
217 217  
218 218  
219 -
220 220  == 4.4 Show Firmware Version ==
221 221  
222 222  
... ... @@ -225,9 +225,9 @@
225 225  
226 226  (% style="color:blue" %)**AT Command: AT+VER**
227 227  
228 -(% border="1" style="background-color:#ffffcc; color:green; width:542px" %)
229 -|=(% colspan="3" style="width: 539px;" %)AT+VER: Image Version and Frequency Band
230 -|(% style="width:157px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:86px" %)**Response**
221 +(% border="1" style="background-color:#f2f2f2; width:542px" %)
222 +|=(% colspan="3" style="width: 539px;background-color:#D9E2F3;color:#0070C0" %)AT+VER: Image Version and Frequency Band
223 +|(% style="color:#0070c0; width:157px" %)**Command Example**|(% style="color:#0070c0; width:295px" %)**Function**|(% style="color:#0070c0; width:86px" %)**Response**
231 231  |(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
232 232  1.3 EU868
233 233  
... ... @@ -247,7 +247,6 @@
247 247  (((
248 248  
249 249  
250 -
251 251  **xx: Software Type:**
252 252  )))
253 253  
... ... @@ -281,7 +281,6 @@
281 281  firmware version: v1.1.0 ~-~-> 110
282 282  
283 283  
284 -
285 285  == 4.5 Show System Configure ==
286 286  
287 287  
... ... @@ -290,23 +290,19 @@
290 290  
291 291  (% style="color:blue" %)**AT Command: AT+CFG**
292 292  
293 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
294 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
295 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
284 +(% border="1" style="background-color:#f2f2f2; width:599.222px" %)
285 +|=(% colspan="3" style="width: 596px;background-color:#D9E2F3;color:#0070C0" %)AT+CFG: Print all configurations
286 +|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:154px" %)**Function**|(% style="color:#0070c0; width:280px" %)**Response**
296 296  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
297 297  AT+DEUI = XX XX XX XX XX XX XX XX
298 -
299 299  AT+DADDR=XXXXXXXX
300 -
301 301  ……….
302 -
303 303  AT+RX2WTO=X
304 -
305 305  AT+CHS=868100000
306 -
307 307  OK
308 308  )))
309 309  
296 +(% style="display:none" %) (%%)
310 310  
311 311  = 5. Keys, IDs and EUIs management =
312 312  
... ... @@ -318,14 +318,15 @@
318 318  
319 319  (% style="color:blue" %)**AT Command: AT+APPEUI**
320 320  
321 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
322 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI
323 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
308 +(% border="1" style="background-color:#f2f2f2; width:686.222px" %)
309 +|=(% colspan="3" style="width: 683px;background-color:#D9E2F3;color:#0070C0" %)AT+APPEUI
310 +|(% style="color:#0070c0; width:305px" %)**Command Example**|(% style="color:#0070c0; width:186px" %)**Function**|(% style="color:#0070c0; width:191px" %)**Response**
324 324  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
325 325  OK
326 326  )))
327 327  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
328 328  
316 +(% style="display:none" %) (%%)
329 329  
330 330  == 5.2 Application Key ==
331 331  
... ... @@ -335,14 +335,15 @@
335 335  
336 336  (% style="color:blue" %)**AT Command: AT+APPKEY**
337 337  
338 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
339 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY
340 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
326 +(% border="1" style="background-color:#f2f2f2; width:976.222px" %)
327 +|=(% colspan="3" style="width: 973px;background-color:#D9E2F3;color:#0070C0" %)AT+APPKEY
328 +|(% style="color:#0070c0; width:441px" %)**Command Example**|(% style="color:#0070c0; width:180px" %)**Function**|(% style="color:#0070c0; width:350px" %)**Response**
341 341  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
342 342  OK
343 343  )))
344 344  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
345 345  
334 +(% style="display:none" %) (%%)
346 346  
347 347  == 5.3 Application Session Key ==
348 348  
... ... @@ -352,9 +352,9 @@
352 352  
353 353  (% style="color:blue" %)**AT Command: AT+APPSKEY**
354 354  
355 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
356 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
357 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
344 +(% border="1" style="background-color:#f2f2f2; width:1040.22px" %)
345 +|=(% colspan="3" style="width: 1037px;background-color:#D9E2F3;color:#0070C0" %)AT+APPSKEY
346 +|(% style="color:#0070c0; width:451px" %)**Command Example**|(% style="color:#0070c0; width:231px" %)**Function**|(% style="color:#0070c0; width:354px" %)**Response**
358 358  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
359 359  OK
360 360  )))
... ... @@ -362,6 +362,7 @@
362 362  OK
363 363  )))
364 364  
354 +(% style="display:none" %) (%%)
365 365  
366 366  == 5.4 Device Address ==
367 367  
... ... @@ -371,9 +371,9 @@
371 371  
372 372  (% style="color:blue" %)**AT Command: AT+DADDR**
373 373  
374 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
375 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR
376 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
364 +(% border="1" style="background-color:#f2f2f2; width:795.222px" %)
365 +|=(% colspan="3" style="width: 792px;background-color:#D9E2F3;color:#0070C0" %)AT+DADDR
366 +|(% style="color:#0070c0; width:192px" %)**Command Example**|(% style="color:#0070c0; width:241px" %)**Function**|(% style="color:#0070c0; width:359px" %)**Response**
377 377  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
378 378  A8 40 41 FF
379 379  
... ... @@ -381,6 +381,7 @@
381 381  )))
382 382  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
383 383  
374 +(% style="display:none" %) (%%)
384 384  
385 385  == 5.5 Device EUI ==
386 386  
... ... @@ -390,9 +390,9 @@
390 390  
391 391  (% style="color:blue" %)**AT Command: AT+DEUI**
392 392  
393 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
394 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI
395 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
384 +(% border="1" style="background-color:#f2f2f2; width:1035.22px" %)
385 +|=(% colspan="3" style="width: 1032px;background-color:#D9E2F3;color:#0070C0" %)AT+DEUI
386 +|(% style="color:#0070c0; width:250px" %)**Command Example**|(% style="color:#0070c0; width:147px" %)**Function**|(% style="color:#0070c0; width:634px" %)**Response**
396 396  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
397 397  OK
398 398  )))
... ... @@ -400,6 +400,7 @@
400 400  OK
401 401  )))
402 402  
394 +(% style="display:none" %) (%%)
403 403  
404 404  == 5.6 Network ID ==
405 405  
... ... @@ -409,14 +409,15 @@
409 409  
410 410  (% style="color:blue" %)**AT Command: AT+NWKID**
411 411  
412 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
413 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID
414 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
404 +(% border="1" style="background-color:#f2f2f2; width:448.222px" %)
405 +|=(% colspan="3" style="width: 445px;background-color:#D9E2F3;color:#0070C0" %)AT+NWKID
406 +|(% style="color:#0070c0; width:191px" %)**Command Example**|(% style="color:#0070c0; width:153px" %)**Function**|(% style="color:#0070c0; width:101px" %)**Response**
415 415  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
416 416  OK
417 417  )))
418 418  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
419 419  
412 +(% style="display:none" %) (%%)
420 420  
421 421  == 5.7 Network Session Key ==
422 422  
... ... @@ -426,14 +426,15 @@
426 426  
427 427  (% style="color:blue" %)**AT Command: AT+NWKSKEY**
428 428  
429 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
430 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
431 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
422 +(% border="1" style="background-color:#f2f2f2; width:1017.22px" %)
423 +|=(% colspan="3" style="width: 1014px;background-color:#D9E2F3;;color:#0070C0" %)AT+NWKSKEY
424 +|(% style="color:#0070c0; width:455px" %)**Command Example**|(% style="color:#0070c0; width:215px" %)**Function**|(% style="color:#0070c0; width:343px" %)**Response**
432 432  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
433 433  OK
434 434  )))
435 435  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
436 436  
430 +(% style="display:none" %) (%%)
437 437  
438 438  = 6. Joining and sending date on LoRaWAN network =
439 439  
... ... @@ -447,9 +447,9 @@
447 447  
448 448  (% style="color:blue" %)**AT Command: AT+CFM**
449 449  
450 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
451 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
452 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
444 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
445 +|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+CFM
446 +|(% style="color:#0070c0; width:155px" %)**Command Example**|(% style="color:#0070c0; width:205px" %)**Function**|(% style="color:#0070c0; width:346px" %)**Response**
453 453  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
454 454  OK
455 455  )))
... ... @@ -465,6 +465,7 @@
465 465  * **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
466 466  * **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
467 467  
462 +(% style="display:none" %) (%%)
468 468  
469 469  === 6.1.2  AT+CFM command since DR-LWS007 software stack ===
470 470  
... ... @@ -471,9 +471,9 @@
471 471  
472 472  (% style="color:blue" %)**AT Command: AT+CFM**
473 473  
474 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
475 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
476 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
469 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
470 +|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+CFM
471 +|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:198px" %)**Function**|(% style="color:#0070c0; width:349px" %)**Response**
477 477  |(% style="width:160px" %)(((
478 478  AT+CFM=1,0,0
479 479  
... ... @@ -511,6 +511,7 @@
511 511  * **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
512 512  * **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
513 513  
509 +(% style="display:none" %) (%%)
514 514  
515 515  == 6.2 Confirm Status ==
516 516  
... ... @@ -520,13 +520,14 @@
520 520  
521 521  (% style="color:blue" %)**AT Command: AT+CFS**
522 522  
523 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
524 -|=(% colspan="3" style="width: 531px;" %)AT+CFS
525 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
526 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
519 +(% border="1" style="background-color:#f2f2f2; width:463px" %)
520 +|=(% colspan="3" style="width: 460px;background-color:#D9E2F3;color:#0070C0" %)AT+CFS
521 +|(% style="color:#0070c0; width:156px" %)**Command Example**|(% style="color:#0070c0; width:193px" %)**Function**|(% style="color:#0070c0; width:107px" %)**Response**
522 +|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
527 527  OK
528 528  )))
529 529  
526 +(% style="display:none" %) (%%)
530 530  
531 531  == 6.3 Join LoRa® Network ==
532 532  
... ... @@ -536,15 +536,15 @@
536 536  
537 537  (% style="color:blue" %)**AT Command: AT+JOIN**
538 538  
539 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
540 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN
541 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
536 +(% border="1" style="background-color:#f2f2f2; width:647.222px" %)
537 +|=(% colspan="3" style="width: 644px;background-color:#D9E2F3;color:#0070C0" %)AT+JOIN
538 +|(% style="color:#0070c0; width:163px" %)**Command Example**|(% style="color:#0070c0; width:147px" %)**Function**|(% style="color:#0070c0; width:334px" %)**Response**
542 542  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
543 543  OK
544 -
545 545  While Error in format, return AT_BUSY_ERROR
546 546  )))
547 547  
544 +(% style="display:none" %) (%%)
548 548  
549 549  == 6.4 LoRa® Network Join Mode ==
550 550  
... ... @@ -554,9 +554,9 @@
554 554  
555 555  (% style="color:blue" %)**AT Command: AT+NJM**
556 556  
557 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
558 -|=(% colspan="3" style="width: 750px;" %)AT+NJM
559 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
554 +(% border="1" style="background-color:#f2f2f2; width:753.222px" %)
555 +|=(% colspan="3" style="width: 750px;background-color:#D9E2F3;color:#0070C0" %)AT+NJM
556 +|(% style="color:#0070c0; width:162px" %)**Command Example**|(% style="color:#0070c0; width:227px" %)**Function**|(% style="color:#0070c0; width:361px" %)**Response**
560 560  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
561 561  OK
562 562  )))
... ... @@ -572,6 +572,7 @@
572 572  * **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
573 573  * **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
574 574  
572 +(% style="display:none" %) (%%)
575 575  
576 576  == 6.5 LoRa® Network Join Status ==
577 577  
... ... @@ -581,13 +581,14 @@
581 581  
582 582  (% style="color:blue" %)**AT Command: AT+NJS**
583 583  
584 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
585 -|=(% colspan="3" style="width: 495px;" %)AT+NJS
586 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
582 +(% border="1" style="background-color:#f2f2f2; width:498.222px" %)
583 +|=(% colspan="3" style="width: 495px;background-color:#D9E2F3;color:#0070C0" %)AT+NJS
584 +|(% style="color:#0070c0; width:169px" %)**Command Example**|(% style="color:#0070c0; width:164px" %)**Function**|(% style="color:#0070c0; width:161px" %)**Response**
587 587  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
588 588  OK
589 589  )))
590 590  
589 +(% style="display:none" %) (%%)
591 591  
592 592  == 6.6 Print Last Received Data in Raw Format ==
593 593  
... ... @@ -597,13 +597,14 @@
597 597  
598 598  (% style="color:blue" %)**AT Command: AT+RECV**
599 599  
600 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
601 -|=(% colspan="3" style="width: 584px;" %)AT+RECV
602 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
599 +(% border="1" style="background-color:#f2f2f2; width:587.222px" %)
600 +|=(% colspan="3" style="width: 584px;background-color:#D9E2F3;color:#0070C0" %)AT+RECV
601 +|(% style="color:#0070c0; width:161px" %)**Command Example**|(% style="color:#0070c0; width:272px" %)**Function**|(% style="color:#0070c0; width:150px" %)**Response**
603 603  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
604 604  OK
605 605  )))
606 606  
606 +(% style="display:none" %) (%%)
607 607  
608 608  == 6.7 Print Last Received Data in Binary Format ==
609 609  
... ... @@ -613,13 +613,14 @@
613 613  
614 614  (% style="color:blue" %)**AT Command: AT+RECVB**
615 615  
616 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
617 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB
618 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
616 +(% border="1" style="background-color:#f2f2f2; width:793.222px" %)
617 +|=(% colspan="3" style="width: 790px;background-color:#D9E2F3;color:#0070C0" %)AT+RECVB
618 +|(% style="color:#0070c0; width:173px" %)**Command Example**|(% style="color:#0070c0; width:497px" %)**Function**|(% style="color:#0070c0; width:120px" %)**Response**
619 619  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
620 620  OK
621 621  )))
622 622  
623 +(% style="display:none" %) (%%)
623 623  
624 624  == 6.8 Send Text Data ==
625 625  
... ... @@ -629,17 +629,15 @@
629 629  
630 630  (% style="color:blue" %)**AT Command: AT+SEND**
631 631  
632 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
633 -|=(% colspan="3" style="width: 988px;" %)AT+SEND
634 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
633 +(% border="1" style="background-color:#f2f2f2; width:991.222px" %)
634 +|=(% colspan="3" style="width: 988px;background-color:#D9E2F3;color:#0070C0" %)AT+SEND
635 +|(% style="color:#0070c0; width:201px" %)**Command Example**|(% style="color:#0070c0; width:340px" %)**Function**|(% style="color:#0070c0; width:446px" %)**Response**
635 635  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
636 636  While Error in format, return
637 -
638 638  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
639 -
640 -
641 641  )))
642 642  
641 +(% style="display:none" %) (%%)
643 643  
644 644  == 6.9 Send Hexadecimal Data ==
645 645  
... ... @@ -649,16 +649,15 @@
649 649  
650 650  (% style="color:blue" %)**AT Command: AT+SENDB**
651 651  
652 -(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
653 -|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
654 -|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
651 +(% border="1" style="background-color:f2f2f2; width:1101px" %)
652 +|=(% colspan="3" style="width: 1098px;background-color:#D9E2F3;color:#0070C0" %)AT+SENDB
653 +|(% style="color:#0070c0; width:257px" %)**Command Example**|(% style="color:#0070c0; width:394px" %)**Function**|(% style="color:#0070c0; width:446px" %)**Response**
655 655  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
656 656  |(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
657 -AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
658 -
659 -
656 +AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
660 660  )))
661 661  
659 +(% style="display:none" %) (%%)
662 662  
663 663  = 7. LoRaWAN network management =
664 664  
... ... @@ -670,9 +670,9 @@
670 670  
671 671  (% style="color:blue" %)**AT Command: AT+ADR**
672 672  
673 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
674 -|=(% colspan="3" style="width: 680px;" %)AT+ADR
675 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
671 +(% border="1" style="background-color:f2f2f2; width:683.222px" %)
672 +|=(% colspan="3" style="width: 680px;background-color:#D9E2F3;color:#0070C0" %)AT+ADR
673 +|(% style="color:#0070c0; width:162px" %)**Command Example**|(% style="color:#0070c0; width:266px" %)**Function**|(% style="color:#0070c0; width:250px" %)**Response**
676 676  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
677 677  OK
678 678  )))
... ... @@ -688,6 +688,7 @@
688 688  * **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
689 689  * **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
690 690  
689 +(% style="display:none" %) (%%)
691 691  
692 692  == 7.2 LoRa® Class ==
693 693  
... ... @@ -697,9 +697,9 @@
697 697  
698 698  (% style="color:blue" %)**AT Command:  AT+CLASS**
699 699  
700 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
701 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS
702 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
699 +(% border="1" style="background-color:#f2f2f2; width:507.222px" %)
700 +|=(% colspan="3" style="width: 504px;background-color:#D9E2F3;color:#0070C0" %)AT+CLASS
701 +|(% style="color:#0070c0; width:163px" %)**Command Example**|(% style="color:#0070c0; width:166px" %)**Function**|(% style="color:#0070c0; width:175px" %)**Response**
703 703  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
704 704  OK
705 705  )))
... ... @@ -707,7 +707,13 @@
707 707  
708 708  )))
709 709  
709 +(% style="display:none" %)
710 710  
711 +(% style="color:red" %)**Notice:**
712 +
713 +* Run AT+FDR before running AT+CLASS=C
714 +* After change to Class=C, Before OTAA Join Successfule, the end node will still shows to use CLASS=A for OTAA Joined. It will use CLASS=C after OTAA Join Succeccful.
715 +
711 711  == 7.3 Duty Cycle Setting ==
712 712  
713 713  
... ... @@ -716,9 +716,9 @@
716 716  
717 717  (% style="color:blue" %)**AT Command:  AT+DCS**
718 718  
719 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
720 -|=(% colspan="3" style="width: 512px;" %)AT+DCS
721 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
724 +(% border="1" style="background-color:#f2f2f2; width:515.222px" %)
725 +|=(% colspan="3" style="width: 512px;background-color:#D9E2F3;color:#0070C0" %)AT+DCS
726 +|(% style="color:#0070c0; width:165px" %)**Command Example**|(% style="color:#0070c0; width:239px" %)**Function**|(% style="color:#0070c0; width:107px" %)**Response**
722 722  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
723 723  OK
724 724  )))
... ... @@ -726,6 +726,7 @@
726 726  
727 727  )))
728 728  
734 +(% style="display:none" %) (%%)
729 729  
730 730  == 7.4 Data Rate ==
731 731  
... ... @@ -736,14 +736,13 @@
736 736  **Notice:**
737 737  
738 738  * User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
739 -* Data Rate specifies Spreading Factor. The mapping various in different frequency band. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
745 +* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
740 740  
741 -
742 742  (% style="color:blue" %)**AT Command: AT+DR**
743 743  
744 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
745 -|=(% colspan="3" style="width: 463px;" %)AT+DR
746 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
749 +(% border="1" style="background-color:#f2f2f2; width:466.222px" %)
750 +|=(% colspan="3" style="width: 463px;background-color:#D9E2F3;color:#0070C0" %)AT+DR
751 +|(% style="color:#0070c0; width:156px" %)**Command Example**|(% style="color:#0070c0; width:167px" %)**Function**|(% style="color:#0070c0; width:140px" %)**Response**
747 747  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
748 748  OK
749 749  )))
... ... @@ -758,6 +758,7 @@
758 758  * **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
759 759  * **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
760 760  
766 +(% style="display:none" %) (%%)
761 761  
762 762  == 7.5 Frame Counter Downlink ==
763 763  
... ... @@ -767,9 +767,9 @@
767 767  
768 768  (% style="color:blue" %)**AT Command:  AT+FCD**
769 769  
770 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
771 -|=(% colspan="3" style="width: 690px;" %)AT+FCD
772 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
776 +(% border="1" style="background-color:#f2f2f2; width:693.222px" %)
777 +|=(% colspan="3" style="width: 690px;background-color:#D9E2F3;color:#0070C0" %)AT+FCD
778 +|(% style="color:#0070c0; width:162px" %)**Command Example**|(% style="color:#0070c0; width:258px" %)**Function**|(% style="color:#0070c0; width:269px" %)**Response**
773 773  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
774 774  OK
775 775  )))
... ... @@ -777,6 +777,7 @@
777 777  OK
778 778  )))
779 779  
786 +(% style="display:none" %) (%%)
780 780  
781 781  == 7.6 Frame Counter Uplink ==
782 782  
... ... @@ -785,9 +785,9 @@
785 785  
786 786  (% style="color:blue" %)**AT Command:  AT+FCU**
787 787  
788 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
789 -|=(% colspan="3" style="width: 531px;" %)AT+FCU
790 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
795 +(% border="1" style="background-color:#f2f2f2; width:534.222px" %)
796 +|=(% colspan="3" style="width: 531px;background-color:#D9E2F3;color:#0070C0" %)AT+FCU
797 +|(% style="color:#0070c0; width:177px" %)**Command Example**|(% style="color:#0070c0; width:239px" %)**Function**|(% style="color:#0070c0; width:113px" %)**Response**
791 791  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
792 792  OK
793 793  )))
... ... @@ -795,6 +795,7 @@
795 795  
796 796  )))
797 797  
805 +(% style="display:none" %) (%%)
798 798  
799 799  == 7.7 Join Accept Delay1 ==
800 800  
... ... @@ -804,9 +804,9 @@
804 804  
805 805  (% style="color:blue" %)**AT Command:  AT+JN1DL**
806 806  
807 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
808 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
809 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
815 +(% border="1" style="background-color:#f2f2f2; width:537.222px" %)
816 +|=(% colspan="3" style="width: 534px;background-color:#D9E2F3;color:#0070C0" %)AT+JN1DL
817 +|(% style="color:#0070c0; width:164px" %)**Command Example**|(% style="color:#0070c0; width:229px" %)**Function**|(% style="color:#0070c0; width:140px" %)**Response**
810 810  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
811 811  OK
812 812  )))
... ... @@ -814,6 +814,7 @@
814 814  
815 815  )))
816 816  
825 +(% style="display:none" %) (%%)
817 817  
818 818  == 7.8 Join Accept Delay2 ==
819 819  
... ... @@ -823,9 +823,9 @@
823 823  
824 824  (% style="color:blue" %)**AT Command:  AT+JN2DL**
825 825  
826 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
827 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
828 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
835 +(% border="1" style="background-color:#f2f2f2; width:538.222px" %)
836 +|=(% colspan="3" style="width: 535px;background-color:#D9E2F3;color:#0070C0" %)AT+JN2DL
837 +|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:228px" %)**Function**|(% style="color:#0070c0; width:146px" %)**Response**
829 829  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
830 830  OK
831 831  )))
... ... @@ -833,6 +833,7 @@
833 833  
834 834  )))
835 835  
845 +(% style="display:none" %) (%%)
836 836  
837 837  == 7.9 Public Network Mode ==
838 838  
... ... @@ -844,9 +844,9 @@
844 844  
845 845  (% style="color:blue" %)**AT Command:  AT+PNM**
846 846  
847 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
848 -|=(% colspan="3" style="width: 664px;" %)AT+PNM
849 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
857 +(% border="1" style="background-color:#f2f2f2; width:667.222px" %)
858 +|=(% colspan="3" style="width: 664px;background-color:#D9E2F3;color:#0070C0" %)AT+PNM
859 +|(% style="color:#0070c0; width:166px" %)**Command Example**|(% style="color:#0070c0; width:225px" %)**Function**|(% style="color:#0070c0; width:272px" %)**Response**
850 850  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
851 851  OK
852 852  )))
... ... @@ -861,6 +861,7 @@
861 861  )))
862 862  |(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
863 863  
874 +(% style="display:none" %) (%%)
864 864  
865 865  == 7.10 Receive Delay1 ==
866 866  
... ... @@ -870,9 +870,9 @@
870 870  
871 871  (% style="color:blue" %)**AT Command: AT+RX1DL**
872 872  
873 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
874 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
875 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
884 +(% border="1" style="background-color:#f2f2f2; width:408.222px" %)
885 +|=(% colspan="3" style="width: 405px;background-color:#D9E2F3;color:#0070C0" %)AT+RX1DL
886 +|(% style="color:#0070c0; width:155px" %)**Command Example**|(% style="color:#0070c0; width:128px" %)**Function**|(% style="color:#0070c0; width:122px" %)**Response**
876 876  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
877 877  OK
878 878  )))
... ... @@ -880,6 +880,7 @@
880 880  
881 881  )))
882 882  
894 +(% style="display:none" %) (%%)
883 883  
884 884  == 7.11 Receive Delay2 ==
885 885  
... ... @@ -889,9 +889,9 @@
889 889  
890 890  (% style="color:blue" %)**AT Command: AT+RX2DL**
891 891  
892 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
893 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
894 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
904 +(% border="1" style="background-color:#f2f2f2; width:481.222px" %)
905 +|=(% colspan="3" style="width: 478px;background-color:#D9E2F3;color:#0070C0" %)AT+RX2DL
906 +|(% style="color:#0070c0; width:175px" %)**Command Example**|(% style="color:#0070c0; width:152px" %)**Function**|(% style="color:#0070c0; width:150px" %)**Response**
895 895  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
896 896  OK
897 897  )))
... ... @@ -899,6 +899,7 @@
899 899  
900 900  )))
901 901  
914 +(% style="display:none" %) (%%)
902 902  
903 903  == 7.12 Rx2 Window Data Rate ==
904 904  
... ... @@ -908,9 +908,9 @@
908 908  
909 909  (% style="color:blue" %)**AT Command:  AT+RX2DR**
910 910  
911 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
912 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
913 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
924 +(% border="1" style="background-color:#f2f2f2; width:525.222px" %)
925 +|=(% colspan="3" style="width: 522px;background-color:#D9E2F3;color:#0070C0" %)AT+RX2DR
926 +|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:232px" %)**Function**|(% style="color:#0070c0; width:130px" %)**Response**
914 914  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
915 915  OK
916 916  )))
... ... @@ -918,6 +918,7 @@
918 918  
919 919  )))
920 920  
934 +(% style="display:none" %) (%%)
921 921  
922 922  == 7.13 Rx2 Window Frequency ==
923 923  
... ... @@ -927,9 +927,9 @@
927 927  
928 928  (% style="color:blue" %)**AT Command:  AT+RX2FQ**
929 929  
930 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
931 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
932 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
944 +(% border="1" style="background-color:#f2f2f2; width:587.222px" %)
945 +|=(% colspan="3" style="width: 584px;background-color:#D9E2F3;color:#0070C0" %)AT+RX2FQ
946 +|(% style="color:#0070c0; width:183px" %)**Command Example**|(% style="color:#0070c0; width:240px" %)**Function**|(% style="color:#0070c0; width:160px" %)**Response**
933 933  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
934 934  OK
935 935  )))
... ... @@ -937,6 +937,7 @@
937 937  
938 938  )))
939 939  
954 +(% style="display:none" %) (%%)
940 940  
941 941  == 7.14 Transmit Power ==
942 942  
... ... @@ -948,9 +948,9 @@
948 948  
949 949  (% style="color:blue" %)**AT Command:  AT+TXP**
950 950  
951 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
952 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
953 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
966 +(% border="1" style="background-color:#f2f2f2; width:465.222px" %)
967 +|=(% colspan="3" style="width: 462px;background-color:#D9E2F3;color:#0070C0" %)AT+TXP
968 +|(% style="color:#0070c0; width:161px" %)**Command Example**|(% style="color:#0070c0; width:189px" %)**Function**|(% style="color:#0070c0; width:112px" %)**Response**
954 954  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
955 955  OK
956 956  )))
... ... @@ -963,8 +963,9 @@
963 963  If the downlink payload=22000100, it means setting the TXP to 0.
964 964  
965 965  * **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
966 -* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+TXP=0.
981 +* **Example 2**: Downlink Payload: **22000000**  ~/~/ Set AT+TXP=0.
967 967  
983 +(% style="display:none" %) (%%)
968 968  
969 969  == 7.15 RSSI of the Last Received Packet ==
970 970  
... ... @@ -974,13 +974,14 @@
974 974  
975 975  (% style="color:blue" %)**AT Command:AT+RSSI**
976 976  
977 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
978 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
979 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
993 +(% border="1" style="background-color:#f2f2f2; width:557.222px" %)
994 +|=(% colspan="3" style="width: 554px;background-color:#D9E2F3;color:#0070C0" %)AT+RSSI
995 +|(% style="color:#0070c0; width:164px" %)**Command Example**|(% style="color:#0070c0; width:289px" %)**Function**|(% style="color:#0070c0; width:100px" %)**Response**
980 980  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
981 981  OK
982 982  )))
983 983  
1000 +(% style="display:none" %) (%%)
984 984  
985 985  == 7.16 SNR of the Last Received Packet ==
986 986  
... ... @@ -990,13 +990,14 @@
990 990  
991 991  (% style="color:blue" %)**AT Command:  AT+SNR**
992 992  
993 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
994 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
995 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
1010 +(% border="1" style="background-color:#f2f2f2; width:571.222px" %)
1011 +|=(% colspan="3" style="width: 568px;background-color:#D9E2F3;color:#0070C0" %)AT+SNR
1012 +|(% style="color:#0070c0; width:164px" %)**Command Example**|(% style="color:#0070c0; width:290px" %)**Function**|(% style="color:#0070c0; width:113px" %)**Response**
996 996  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
997 997  OK
998 998  )))
999 999  
1017 +(% style="display:none" %) (%%)
1000 1000  
1001 1001  == 7.17 Application Port ==
1002 1002  
... ... @@ -1006,9 +1006,9 @@
1006 1006  
1007 1007  (% style="color:blue" %)**AT Command: AT+PORT**
1008 1008  
1009 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
1010 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
1011 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
1027 +(% border="1" style="background-color:#f2f2f2; width:500.222px" %)
1028 +|=(% colspan="3" style="width: 497px;background-color:#D9E2F3;color:#0070C0" %)AT+PORT
1029 +|(% style="color:#0070c0; width:157px" %)**Command Example**|(% style="color:#0070c0; width:204px" %)**Function**|(% style="color:#0070c0; width:135px" %)**Response**
1012 1012  |(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
1013 1013  OK
1014 1014  )))
... ... @@ -1023,6 +1023,7 @@
1023 1023  * **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1024 1024  * **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1025 1025  
1044 +(% style="display:none" %) (%%)
1026 1026  
1027 1027  == 7.18 Single Channel Mode ==
1028 1028  
... ... @@ -1032,14 +1032,15 @@
1032 1032  
1033 1033  (% style="color:blue" %)**AT Command: AT+CHS**
1034 1034  
1035 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
1036 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
1037 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
1054 +(% border="1" style="background-color:#f2f2f2; width:603.222px" %)
1055 +|=(% colspan="3" style="width: 600px;background-color:#D9E2F3;color:#0070C0" %)AT+CHS
1056 +|(% style="color:#0070c0; width:182px" %)**Command Example**|(% style="color:#0070c0; width:295px" %)**Function**|(% style="color:#0070c0; width:122px" %)**Response**
1038 1038  |(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
1039 1039  OK
1040 1040  )))
1041 1041  |(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
1042 1042  
1062 +(% style="display:none" %) (%%)
1043 1043  
1044 1044  == 7.19 Eight Channel Mode ==
1045 1045  
... ... @@ -1049,9 +1049,9 @@
1049 1049  
1050 1050  (% style="color:blue" %)**AT Command: AT+CHE**
1051 1051  
1052 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1053 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
1054 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1072 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
1073 +|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+CHE
1074 +|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:198px" %)**Function**|(% style="color:#0070c0; width:349px" %)**Response**
1055 1055  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
1056 1056  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
1057 1057  
... ... @@ -1059,7 +1059,7 @@
1059 1059  )))
1060 1060  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1061 1061  
1062 -(% style="color:blue" %)**Downlink Command: 0x24**
1082 +(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
1063 1063  
1064 1064  Format: Command Code (0x24) followed by 1 bytes channel value.
1065 1065  
... ... @@ -1068,6 +1068,7 @@
1068 1068  * **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1069 1069  * **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1070 1070  
1091 +(% style="display:none" %) (%%)
1071 1071  
1072 1072  == 7.20 Get or Set RXwindows1 timeout ==
1073 1073  
... ... @@ -1077,33 +1077,27 @@
1077 1077  
1078 1078  (% style="color:blue" %)**AT Command: AT+RX1WTO**
1079 1079  
1080 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1081 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1082 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1101 +(% border="1" style="background-color:#f2f2f2; width:460.222px" %)
1102 +|=(% colspan="3" style="width: 457px;background-color:#D9E2F3;color:#0070C0" %)AT+ RX1WTO
1103 +|(% style="color:#0070c0; width:163px" %)**Command Example**|(% style="color:#0070c0; width:201px" %)**Function**|(% style="color:#0070c0; width:93px" %)**Response**
1083 1083  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
1084 1084  OK
1085 1085  )))
1086 1086  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1087 1087  
1088 -(((
1089 -
1109 +(% style="display:none" %) (%%)
1090 1090  
1091 -
1111 +(((
1092 1092  (% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1093 -
1094 -
1095 1095  )))
1096 1096  
1097 1097  [[image:image-20220526162535-1.png]]
1098 1098  
1099 -
1100 1100  (((
1101 1101  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1102 -
1103 -
1104 -
1105 1105  )))
1106 1106  
1121 +
1107 1107  == 7.21 Get or Set RXwindows2 timeout ==
1108 1108  
1109 1109  
... ... @@ -1112,14 +1112,15 @@
1112 1112  
1113 1113  (% style="color:blue" %)**AT Command: AT+RX2WTO**
1114 1114  
1115 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1116 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1117 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1130 +(% border="1" style="background-color:#f2f2f2; width:497.222px" %)
1131 +|=(% colspan="3" style="width: 494px;background-color:#D9E2F3;color:#0070C0" %)AT+ RX2WTO
1132 +|(% style="color:#0070c0; width:190px" %)**Command Example**|(% style="color:#0070c0; width:199px" %)**Function**|(% style="color:#0070c0; width:104px" %)**Response**
1118 1118  |(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
1119 1119  OK
1120 1120  )))
1121 1121  |(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1122 1122  
1138 +(% style="display:none" %) (%%)
1123 1123  
1124 1124  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1125 1125  
... ... @@ -1129,9 +1129,9 @@
1129 1129  
1130 1130  (% style="color:blue" %)**AT Command: AT+DWELLT**
1131 1131  
1132 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1133 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1134 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1148 +(% border="1" style="background-color:#f2f2f2; width:497.222px" %)
1149 +|=(% colspan="3" style="width: 494px;background-color:#D9E2F3;color:#0070C0" %)AT+DWELLT
1150 +|(% style="color:#0070c0; width:183px" %)**Command Example**|(% style="color:#0070c0; width:179px" %)**Function**|(% style="color:#0070c0; width:131px" %)**Response**
1135 1135  |(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
1136 1136  OK
1137 1137  )))
... ... @@ -1146,6 +1146,7 @@
1146 1146  * **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1147 1147  * **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1148 1148  
1165 +(% style="display:none" %) (%%)
1149 1149  
1150 1150  == 7.23 Set Packet Receiving Response Level ==
1151 1151  
... ... @@ -1153,7 +1153,7 @@
1153 1153  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1154 1154  
1155 1155  
1156 -**RPL value:**
1173 +(% style="color:blue" %)**RPL value:**
1157 1157  
1158 1158  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1159 1159  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
... ... @@ -1161,7 +1161,7 @@
1161 1161  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1162 1162  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1163 1163  
1164 -**Case Analyes:**
1181 +(% style="color:blue" %)**Case Analyes:**
1165 1165  
1166 1166  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1167 1167  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
... ... @@ -1169,9 +1169,9 @@
1169 1169  
1170 1170  (% style="color:blue" %)**AT Command: AT+RPL**
1171 1171  
1172 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1173 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1174 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1189 +(% border="1" style="background-color:#f2f2f2; width:536.222px" %)
1190 +|=(% colspan="3" style="width: 533px;background-color:#D9E2F3;color:#0070C0" %)AT+RPL
1191 +|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:263px" %)**Function**|(% style="color:#0070c0; width:109px" %)**Response**
1175 1175  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
1176 1176  OK
1177 1177  )))
... ... @@ -1186,6 +1186,7 @@
1186 1186  * **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1187 1187  * **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1188 1188  
1206 +(% style="display:none" %) (%%)
1189 1189  
1190 1190  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1191 1191  
... ... @@ -1192,9 +1192,9 @@
1192 1192  
1193 1193  (% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1194 1194  
1195 -(% border="1" style="background-color:#ffffcc; color:green; width:589px" %)
1196 -|=(% colspan="3" style="width: 586px;" %)AT+**SETMAXNBTRANS**
1197 -|(% style="width:227px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:87px" %)**Response**
1213 +(% border="1" style="background-color:#f2f2f2; width:589px" %)
1214 +|=(% colspan="3" style="width: 586px;background-color:#D9E2F3;color:#0070C0" %)AT+**SETMAXNBTRANS**
1215 +|(% style="color:#0070c0; width:227px" %)**Command Example**|(% style="color:#0070c0; width:300px" %)**Function**|(% style="color:#0070c0; width:87px" %)**Response**
1198 1198  |(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1199 1199  OK
1200 1200  )))
... ... @@ -1217,6 +1217,7 @@
1217 1217  * Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1218 1218  * Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1219 1219  
1238 +(% style="display:none" %) (%%)
1220 1220  
1221 1221  == 7.25 Device offline rejoining （LWS007) ==
1222 1222  
... ... @@ -1223,9 +1223,14 @@
1223 1223  
1224 1224  (% style="color:blue" %)**AT Command: AT+DDETECT**
1225 1225  
1226 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1227 -|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1228 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1245 +AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
1246 +
1247 +* ACK_Timout_1: Unit: min
1248 +* ACK_Timout_2: Unit: min
1249 +
1250 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
1251 +|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+**DDETECT**
1252 +|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:198px" %)**Function**|(% style="color:#0070c0; width:349px" %)**Response**
1229 1229  |(% style="width:160px" %)(((
1230 1230  AT+DDETECT=1,1440,2880
1231 1231  
... ... @@ -1254,14 +1254,19 @@
1254 1254  OK
1255 1255  )))
1256 1256  
1257 -(% style="color:blue" %)**Downlink Command: 0x33**
1281 +(% style="color:blue" %)**Downlink Command: 0x32**
1258 1258  
1259 1259  Format: Command Code (0x32) followed by 2 bytes mode value.
1260 1260  
1261 -If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1285 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1262 1262  
1263 -* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1287 +* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1288 +** 0x01 : Flag
1289 +** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1290 +** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
1291 +** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1264 1264  
1293 +(% style="display:none" %) (%%)
1265 1265  
1266 1266  == 7.26 Request the server to send an ACK ==
1267 1267  
... ... @@ -1268,18 +1268,18 @@
1268 1268  
1269 1269  (% style="color:blue" %)**AT Command: AT+PNACKMD**
1270 1270  
1271 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1272 -|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1273 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1300 +(% border="1" style="background-color:#f2f2f2; width:536.222px" %)
1301 +|=(% colspan="3" style="width: 533px;background-color:#D9E2F3;color:#0070C0" %)**AT+PNACKMD**
1302 +|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:263px" %)**Function**|(% style="color:#0070c0; width:109px" %)**Response**
1274 1274  |(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1275 1275  OK
1276 1276  )))
1277 1277  |(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1278 1278  0
1279 -
1280 1280  OK
1281 1281  )))
1282 1282  
1311 +(% style="display:none" %) (%%)
1283 1283  
1284 1284  == 7.27 Adjust network rejoining interval ==
1285 1285  
... ... @@ -1286,16 +1286,16 @@
1286 1286  
1287 1287  (% style="color:blue" %)**AT Command: AT+RJTDC**
1288 1288  
1289 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1290 -|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1291 -|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1292 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1318 +(% border="1" style="background-color:#f2f2f2; width:727.222px" %)
1319 +|=(% colspan="3" style="width: 724px;background-color:#D9E2F3;color:#0070C0" %)AT+RJTDC
1320 +|(% style="color:#0070c0; width:165px" %)**Command Example**|(% style="color:#0070c0; width:227px" %)**Function**|(% style="color:#0070c0; width:329px" %)**Response**
1321 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1293 1293  OK
1294 1294  
1295 -the interval is 30000ms = 30s
1324 +the interval is 30 min
1296 1296  )))
1297 -|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1298 -Set the ReJoin data transmission interval to 60000ms = 60 seconds
1326 +|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1327 +Set the ReJoin data transmission interval to 60 min
1299 1299  )))
1300 1300  
1301 1301  (% style="color:blue" %)**Downlink Command: 0x26**
... ... @@ -1307,6 +1307,7 @@
1307 1307  * **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1308 1308  * **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1309 1309  
1339 +(% style="display:none" %) (%%)
1310 1310  
1311 1311  = 8. AT Commands Combination =
1312 1312  
... ... @@ -1314,8 +1314,10 @@
1314 1314  
1315 1315  
1316 1316  * (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1347 +
1317 1317  * (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1318 1318  
1350 +(% style="display:none" %) (%%)
1319 1319  
1320 1320  == 8.2 Use Downlink Command to set a fix uplink DR ==
1321 1321  
... ... @@ -1325,7 +1325,9 @@
1325 1325  **Same as:**
1326 1326  
1327 1327  * AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1360 +
1328 1328  * AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1362 +
1329 1329  * AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1330 1330  
1331 1331  

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0