Last modified by kai on 2024/09/06 10:00
<
From version < 54.1 >
edited by Edwin Chen
on 2022/10/16 07:37
To version < 63.40 >
edited by Xiaoling
on 2023/05/29 14:50
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -14,34 +14,31 @@
14 14  
15 15  (((
16 16  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17 -
18 -
19 -
20 20  )))
21 21  
19 +
22 22  = 2. How to use AT Commands or Downlink command =
23 23  
24 24  
25 -* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
26 -* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 +* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 +* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
27 27  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
28 28  ** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
29 29  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
30 30  
29 +(% style="display:none" %) (%%)
31 31  
32 -
33 33  = 3. Support End Node and firmware version =
34 34  
35 35  
36 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
37 -|=(% colspan="3" style="width: 963px;" %)(((
38 38  Dragino STM32 base hardware Firmware / LoRaWAN stack list
39 -)))
40 -|(% style="width:187px" %)(((
35 +
36 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:966px" %)
37 +|(% style="background-color:#4f81bd; color:white; width:187px" %)(((
41 41  **Model**
42 -)))|(% style="width:330px" %)(((
39 +)))|(% style="background-color:#4f81bd; color:white; width:330px" %)(((
43 43  **Description**
44 -)))|(% style="width:445px" %)(((
41 +)))|(% style="background-color:#4f81bd; color:white; width:445px" %)(((
45 45  **Firmware Version <~-~-> Stack Version**
46 46  )))
47 47  |(% style="width:187px" %)(((
... ... @@ -104,8 +104,8 @@
104 104  )))
105 105  )))
106 106  
104 +(% style="display:none" %) (%%)
107 107  
108 -
109 109  = 4. System Management Commands =
110 110  
111 111  == 4.1 Change Uplink Interval ==
... ... @@ -116,9 +116,8 @@
116 116  
117 117  (% style="color:blue" %)**AT Command: AT+TDC**
118 118  
119 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
120 -|=(% colspan="3" style="width: 724px;" %)AT+TDC
121 -|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
116 +(% border="1" style="background-color:#f2f2f2; width:727.222px" %)
117 +|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:329px" %)**Response**
122 122  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
123 123  OK
124 124  
... ... @@ -129,8 +129,6 @@
129 129  )))
130 130  
131 131  (((
132 -
133 -
134 134  (% style="color:blue" %)**Downlink Command: 0x01**
135 135  
136 136  Format: Command Code (0x01) followed by 3 bytes time value.
... ... @@ -143,8 +143,8 @@
143 143  * **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
144 144  * **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
145 145  
140 +(% style="display:none" %) (%%)
146 146  
147 -
148 148  == 4.2 Reboot End Node ==
149 149  
150 150  
... ... @@ -151,11 +151,10 @@
151 151  Feature: Reboot End Node to perform a new OTAA or ABP Join.
152 152  
153 153  
154 -(% style="color:blue" %)**AT Command: ATZ**
148 +(% style="color:blue" %)**AT Command: ATZ  ~/~/ **(%%)Trig a reset of the MCU
155 155  
156 -(% border="1" style="background-color:#ffffcc; color:green; width:546px" %)
157 -|=(% colspan="3" style="width: 543px;" %)ATZ: Trig a reset of the MCU
158 -|(% style="width:157px" %)**Command Example**|(% style="width:92px" %)**Function**|(% style="width:294px" %)**Response**
150 +(% border="1" style="background-color:#f2f2f2; width:546px" %)
151 +|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:92px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:294px" %)**Response**
159 159  |(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
160 160  Device reset and show booting info
161 161  
... ... @@ -177,12 +177,10 @@
177 177  )))
178 178  
179 179  (((
180 -If the downlink payload=**04FF**, the end node will reboot.
181 -
182 -
183 -
173 +If the downlink payload=**04FF**, the end node will reboot.
184 184  )))
185 185  
176 +
186 186  == 4.3 Reset to factory Default ==
187 187  
188 188  
... ... @@ -189,11 +189,10 @@
189 189  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
190 190  
191 191  
192 -(% style="color:blue" %)**AT Command: AT+FDR**
183 +(% style="color:blue" %)**AT Command: AT+FDR  ~/~/  **(%%)Reset to factory default
193 193  
194 -(% border="1" style="background-color:#ffffcc; color:green; width:789px" %)
195 -|=(% colspan="3" style="width: 786px;" %)Reset to factory default
196 -|(% style="width:154px" %)**Command Example**|(% style="width:175px" %)**Function**|(% style="width:456px" %)**Response**
185 +(% border="1" style="background-color:#f2f2f2; width:789px" %)
186 +|(% style="background-color:#4f81bd; color:white; width:154px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:175px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:456px" %)**Response**
197 197  |(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
198 198  Device reset to factory default parameters and show booting info
199 199  
... ... @@ -219,7 +219,6 @@
219 219  )))
220 220  
221 221  
222 -
223 223  == 4.4 Show Firmware Version ==
224 224  
225 225  
... ... @@ -226,11 +226,10 @@
226 226  Feature: Show firmware version. No downlink command yet.
227 227  
228 228  
229 -(% style="color:blue" %)**AT Command: AT+VER**
218 +(% style="color:blue" %)**AT Command: AT+VER  ~/~/   **(%%)Image Version and Frequency Band
230 230  
231 -(% border="1" style="background-color:#ffffcc; color:green; width:542px" %)
232 -|=(% colspan="3" style="width: 539px;" %)AT+VER: Image Version and Frequency Band
233 -|(% style="width:157px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:86px" %)**Response**
220 +(% border="1" style="background-color:#f2f2f2; width:542px" %)
221 +|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:86px" %)**Response**
234 234  |(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
235 235  1.3 EU868
236 236  
... ... @@ -250,8 +250,7 @@
250 250  (((
251 251  
252 252  
253 -
254 -**xx: Software Type:**
241 +(% style="color:#037691" %)**xx: Software Type:**
255 255  )))
256 256  
257 257  * 0x00 01: LGT92 Version
... ... @@ -261,7 +261,7 @@
261 261  (((
262 262  
263 263  
264 -**yy: Frequency Band:**
251 +(% style="color:#037691" %)**yy: Frequency Band:**
265 265  )))
266 266  
267 267  * 0x01: EU868
... ... @@ -278,13 +278,12 @@
278 278  (((
279 279  
280 280  
281 -**zz: Subband**
268 +(% style="color:#037691" %)**zz: Subband**
282 282  )))
283 283  
284 284  firmware version: v1.1.0 ~-~-> 110
285 285  
286 286  
287 -
288 288  == 4.5 Show System Configure ==
289 289  
290 290  
... ... @@ -291,27 +291,21 @@
291 291  Feature: Show All configure. No downlink command yet.
292 292  
293 293  
294 -(% style="color:blue" %)**AT Command: AT+CFG**
280 +(% style="color:blue" %)**AT Command: AT+CFG  ~/~/ **(%%)Print all configurations
295 295  
296 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
297 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
298 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
282 +(% border="1" style="background-color:#f2f2f2; width:599.222px" %)
283 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:154px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:280px" %)**Response**
299 299  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
300 300  AT+DEUI = XX XX XX XX XX XX XX XX
301 -
302 302  AT+DADDR=XXXXXXXX
303 -
304 304  ……….
305 -
306 306  AT+RX2WTO=X
307 -
308 308  AT+CHS=868100000
309 -
310 310  OK
311 311  )))
312 312  
293 +(% style="display:none" %) (%%)
313 313  
314 -
315 315  = 5. Keys, IDs and EUIs management =
316 316  
317 317  == 5.1 Application EUI ==
... ... @@ -322,16 +322,15 @@
322 322  
323 323  (% style="color:blue" %)**AT Command: AT+APPEUI**
324 324  
325 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
326 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI
327 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
305 +(% border="1" style="background-color:#f2f2f2; width:686.222px" %)
306 +|(% style="background-color:#4f81bd; color:white; width:305px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:186px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:191px" %)**Response**
328 328  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
329 329  OK
330 330  )))
331 331  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
332 332  
312 +(% style="display:none" %) (%%)
333 333  
334 -
335 335  == 5.2 Application Key ==
336 336  
337 337  
... ... @@ -340,16 +340,15 @@
340 340  
341 341  (% style="color:blue" %)**AT Command: AT+APPKEY**
342 342  
343 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
344 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY
345 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
322 +(% border="1" style="background-color:#f2f2f2; width:976.222px" %)
323 +|(% style="background-color:#4f81bd; color:white; width:441px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:180px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:350px" %)**Response**
346 346  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
347 347  OK
348 348  )))
349 349  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
350 350  
329 +(% style="display:none" %) (%%)
351 351  
352 -
353 353  == 5.3 Application Session Key ==
354 354  
355 355  
... ... @@ -358,9 +358,8 @@
358 358  
359 359  (% style="color:blue" %)**AT Command: AT+APPSKEY**
360 360  
361 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
362 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
363 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
339 +(% border="1" style="background-color:#f2f2f2; width:1040.22px" %)
340 +|(% style="background-color:#4f81bd; color:white; width:451px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:231px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:354px" %)**Response**
364 364  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
365 365  OK
366 366  )))
... ... @@ -368,8 +368,8 @@
368 368  OK
369 369  )))
370 370  
348 +(% style="display:none" %) (%%)
371 371  
372 -
373 373  == 5.4 Device Address ==
374 374  
375 375  
... ... @@ -378,9 +378,8 @@
378 378  
379 379  (% style="color:blue" %)**AT Command: AT+DADDR**
380 380  
381 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
382 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR
383 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
358 +(% border="1" style="background-color:#f2f2f2; width:795.222px" %)
359 +|(% style="background-color:#4f81bd; color:white; width:192px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:241px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:359px" %)**Response**
384 384  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
385 385  A8 40 41 FF
386 386  
... ... @@ -388,8 +388,8 @@
388 388  )))
389 389  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
390 390  
367 +(% style="display:none" %) (%%)
391 391  
392 -
393 393  == 5.5 Device EUI ==
394 394  
395 395  
... ... @@ -398,9 +398,8 @@
398 398  
399 399  (% style="color:blue" %)**AT Command: AT+DEUI**
400 400  
401 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
402 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI
403 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
377 +(% border="1" style="background-color:#f2f2f2; width:1035.22px" %)
378 +|(% style="background-color:#4f81bd; color:white; width:250px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:634px" %)**Response**
404 404  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
405 405  OK
406 406  )))
... ... @@ -408,8 +408,8 @@
408 408  OK
409 409  )))
410 410  
386 +(% style="display:none" %) (%%)
411 411  
412 -
413 413  == 5.6 Network ID ==
414 414  
415 415  
... ... @@ -418,16 +418,15 @@
418 418  
419 419  (% style="color:blue" %)**AT Command: AT+NWKID**
420 420  
421 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
422 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID
423 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
396 +(% border="1" style="background-color:#f2f2f2; width:448.222px" %)
397 +|(% style="background-color:#4f81bd; color:white; width:191px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:153px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
424 424  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
425 425  OK
426 426  )))
427 427  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
428 428  
403 +(% style="display:none" %) (%%)
429 429  
430 -
431 431  == 5.7 Network Session Key ==
432 432  
433 433  
... ... @@ -436,16 +436,15 @@
436 436  
437 437  (% style="color:blue" %)**AT Command: AT+NWKSKEY**
438 438  
439 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
440 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
441 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
413 +(% border="1" style="background-color:#f2f2f2; width:1017.22px" %)
414 +|(% style="background-color:#4f81bd; color:white; width:455px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:215px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:343px" %)**Response**
442 442  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
443 443  OK
444 444  )))
445 445  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
446 446  
420 +(% style="display:none" %) (%%)
447 447  
448 -
449 449  = 6. Joining and sending date on LoRaWAN network =
450 450  
451 451  == 6.1 Confirm Mode ==
... ... @@ -458,9 +458,8 @@
458 458  
459 459  (% style="color:blue" %)**AT Command: AT+CFM**
460 460  
461 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
462 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
463 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
434 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
435 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:205px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:346px" %)**Response**
464 464  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
465 465  OK
466 466  )))
... ... @@ -476,16 +476,15 @@
476 476  * **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
477 477  * **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
478 478  
451 +(% style="display:none" %) (%%)
479 479  
480 -
481 481  === 6.1.2  AT+CFM command since DR-LWS007 software stack ===
482 482  
483 483  
484 484  (% style="color:blue" %)**AT Command: AT+CFM**
485 485  
486 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
487 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
488 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
458 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
459 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
489 489  |(% style="width:160px" %)(((
490 490  AT+CFM=1,0,0
491 491  
... ... @@ -523,8 +523,8 @@
523 523  * **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
524 524  * **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
525 525  
497 +(% style="display:none" %) (%%)
526 526  
527 -
528 528  == 6.2 Confirm Status ==
529 529  
530 530  
... ... @@ -533,15 +533,14 @@
533 533  
534 534  (% style="color:blue" %)**AT Command: AT+CFS**
535 535  
536 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
537 -|=(% colspan="3" style="width: 531px;" %)AT+CFS
538 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
539 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
507 +(% border="1" style="background-color:#f2f2f2; width:463px" %)
508 +|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
509 +|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
540 540  OK
541 541  )))
542 542  
513 +(% style="display:none" %) (%%)
543 543  
544 -
545 545  == 6.3 Join LoRa® Network ==
546 546  
547 547  
... ... @@ -550,17 +550,15 @@
550 550  
551 551  (% style="color:blue" %)**AT Command: AT+JOIN**
552 552  
553 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
554 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN
555 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
523 +(% border="1" style="background-color:#f2f2f2; width:647.222px" %)
524 +|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:334px" %)**Response**
556 556  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
557 557  OK
558 -
559 559  While Error in format, return AT_BUSY_ERROR
560 560  )))
561 561  
530 +(% style="display:none" %) (%%)
562 562  
563 -
564 564  == 6.4 LoRa® Network Join Mode ==
565 565  
566 566  
... ... @@ -569,9 +569,8 @@
569 569  
570 570  (% style="color:blue" %)**AT Command: AT+NJM**
571 571  
572 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
573 -|=(% colspan="3" style="width: 750px;" %)AT+NJM
574 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
540 +(% border="1" style="background-color:#f2f2f2; width:753.222px" %)
541 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
575 575  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
576 576  OK
577 577  )))
... ... @@ -587,8 +587,8 @@
587 587  * **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
588 588  * **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
589 589  
557 +(% style="display:none" %) (%%)
590 590  
591 -
592 592  == 6.5 LoRa® Network Join Status ==
593 593  
594 594  
... ... @@ -597,15 +597,14 @@
597 597  
598 598  (% style="color:blue" %)**AT Command: AT+NJS**
599 599  
600 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
601 -|=(% colspan="3" style="width: 495px;" %)AT+NJS
602 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
567 +(% border="1" style="background-color:#f2f2f2; width:498.222px" %)
568 +|(% style="background-color:#4f81bd; color:white; width:169px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:164px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:161px" %)**Response**
603 603  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
604 604  OK
605 605  )))
606 606  
573 +(% style="display:none" %) (%%)
607 607  
608 -
609 609  == 6.6 Print Last Received Data in Raw Format ==
610 610  
611 611  
... ... @@ -614,15 +614,14 @@
614 614  
615 615  (% style="color:blue" %)**AT Command: AT+RECV**
616 616  
617 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
618 -|=(% colspan="3" style="width: 584px;" %)AT+RECV
619 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
583 +(% border="1" style="background-color:#f2f2f2; width:587.222px" %)
584 +|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:150px" %)**Response**
620 620  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
621 621  OK
622 622  )))
623 623  
589 +(% style="display:none" %) (%%)
624 624  
625 -
626 626  == 6.7 Print Last Received Data in Binary Format ==
627 627  
628 628  
... ... @@ -631,15 +631,14 @@
631 631  
632 632  (% style="color:blue" %)**AT Command: AT+RECVB**
633 633  
634 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
635 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB
636 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
599 +(% border="1" style="background-color:#f2f2f2; width:793.222px" %)
600 +|(% style="background-color:#4f81bd; color:white; width:173px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:497px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:120px" %)**Response**
637 637  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
638 638  OK
639 639  )))
640 640  
605 +(% style="display:none" %) (%%)
641 641  
642 -
643 643  == 6.8 Send Text Data ==
644 644  
645 645  
... ... @@ -648,19 +648,15 @@
648 648  
649 649  (% style="color:blue" %)**AT Command: AT+SEND**
650 650  
651 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
652 -|=(% colspan="3" style="width: 988px;" %)AT+SEND
653 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
615 +(% border="1" style="background-color:#f2f2f2; width:991.222px" %)
616 +|(% style="background-color:#4f81bd; color:white; width:201px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:340px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:446px" %)**Response**
654 654  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
655 655  While Error in format, return
656 -
657 657  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
658 -
659 -
660 660  )))
661 661  
622 +(% style="display:none" %) (%%)
662 662  
663 -
664 664  == 6.9 Send Hexadecimal Data ==
665 665  
666 666  
... ... @@ -669,18 +669,15 @@
669 669  
670 670  (% style="color:blue" %)**AT Command: AT+SENDB**
671 671  
672 -(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
673 -|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
674 -|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
675 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
676 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
677 -AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
678 -
679 -
632 +(% border="1" style="width:974px" %)
633 +|(% style="background-color:#4f81bd; color:white; width:257px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:394px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:318px" %)**Response**
634 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)OK
635 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)While Error in format, return(((
636 +AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
680 680  )))
681 681  
639 +(% style="display:none" %) (%%)
682 682  
683 -
684 684  = 7. LoRaWAN network management =
685 685  
686 686  == 7.1 Adaptive Data Rate ==
... ... @@ -691,14 +691,13 @@
691 691  
692 692  (% style="color:blue" %)**AT Command: AT+ADR**
693 693  
694 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
695 -|=(% colspan="3" style="width: 680px;" %)AT+ADR
696 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
697 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
651 +(% border="1" style="width:643px" %)
652 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:266px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:209px" %)**Response**
653 +|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:209px" %)1(((
698 698  OK
699 699  )))
700 -|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK
701 -|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((
656 +|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)OK
657 +|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)While Error in format, return(((
702 702  AT_PARAM_ERROR
703 703  )))
704 704  
... ... @@ -709,8 +709,8 @@
709 709  * **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
710 710  * **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
711 711  
668 +(% style="display:none" %) (%%)
712 712  
713 -
714 714  == 7.2 LoRa® Class ==
715 715  
716 716  
... ... @@ -719,9 +719,8 @@
719 719  
720 720  (% style="color:blue" %)**AT Command:  AT+CLASS**
721 721  
722 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
723 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS
724 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
678 +(% border="1" style="background-color:#f2f2f2; width:507.222px" %)
679 +|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:166px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:175px" %)**Response**
725 725  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
726 726  OK
727 727  )))
... ... @@ -729,19 +729,23 @@
729 729  
730 730  )))
731 731  
687 +(% style="display:none" %)
732 732  
689 +(% style="color:red" %)**Notice:**
733 733  
691 +* Run AT+FDR before running AT+CLASS=C
692 +* After change to Class=C, Before OTAA Join Successfule, the end node will still shows to use CLASS=A for OTAA Joined. It will use CLASS=C after OTAA Join Succeccful.
693 +
734 734  == 7.3 Duty Cycle Setting ==
735 735  
736 736  
737 -Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
697 +Feature: Get or Set the ETSI Duty Cycle setting** : 0**=disable, **1**=enable - Only for testing.
738 738  
739 739  
740 740  (% style="color:blue" %)**AT Command:  AT+DCS**
741 741  
742 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
743 -|=(% colspan="3" style="width: 512px;" %)AT+DCS
744 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
702 +(% border="1" style="background-color:#f2f2f2; width:515.222px" %)
703 +|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
745 745  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
746 746  OK
747 747  )))
... ... @@ -749,8 +749,8 @@
749 749  
750 750  )))
751 751  
711 +(% style="display:none" %) (%%)
752 752  
753 -
754 754  == 7.4 Data Rate ==
755 755  
756 756  
... ... @@ -757,14 +757,15 @@
757 757  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
758 758  
759 759  (% style="color:red" %)
760 -Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server.
761 -(%%)
719 +**Notice:**
762 762  
721 +* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
722 +* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
723 +
763 763  (% style="color:blue" %)**AT Command: AT+DR**
764 764  
765 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
766 -|=(% colspan="3" style="width: 463px;" %)AT+DR
767 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
726 +(% border="1" style="background-color:#f2f2f2; width:466.222px" %)
727 +|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:167px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:140px" %)**Response**
768 768  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
769 769  OK
770 770  )))
... ... @@ -779,8 +779,8 @@
779 779  * **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
780 780  * **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
781 781  
742 +(% style="display:none" %) (%%)
782 782  
783 -
784 784  == 7.5 Frame Counter Downlink ==
785 785  
786 786  
... ... @@ -789,9 +789,8 @@
789 789  
790 790  (% style="color:blue" %)**AT Command:  AT+FCD**
791 791  
792 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
793 -|=(% colspan="3" style="width: 690px;" %)AT+FCD
794 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
752 +(% border="1" style="background-color:#f2f2f2; width:693.222px" %)
753 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:258px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:269px" %)**Response**
795 795  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
796 796  OK
797 797  )))
... ... @@ -799,8 +799,8 @@
799 799  OK
800 800  )))
801 801  
761 +(% style="display:none" %) (%%)
802 802  
803 -
804 804  == 7.6 Frame Counter Uplink ==
805 805  
806 806  Feature: Get or Set the Frame Counter Uplink.
... ... @@ -808,9 +808,8 @@
808 808  
809 809  (% style="color:blue" %)**AT Command:  AT+FCU**
810 810  
811 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
812 -|=(% colspan="3" style="width: 531px;" %)AT+FCU
813 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
770 +(% border="1" style="background-color:#f2f2f2; width:534.222px" %)
771 +|(% style="background-color:#4f81bd; color:white; width:177px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
814 814  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
815 815  OK
816 816  )))
... ... @@ -818,8 +818,8 @@
818 818  
819 819  )))
820 820  
779 +(% style="display:none" %) (%%)
821 821  
822 -
823 823  == 7.7 Join Accept Delay1 ==
824 824  
825 825  
... ... @@ -828,9 +828,8 @@
828 828  
829 829  (% style="color:blue" %)**AT Command:  AT+JN1DL**
830 830  
831 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
832 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
833 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
789 +(% border="1" style="background-color:#f2f2f2; width:537.222px" %)
790 +|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:229px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:140px" %)**Response**
834 834  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
835 835  OK
836 836  )))
... ... @@ -838,8 +838,8 @@
838 838  
839 839  )))
840 840  
798 +(% style="display:none" %) (%%)
841 841  
842 -
843 843  == 7.8 Join Accept Delay2 ==
844 844  
845 845  
... ... @@ -848,9 +848,8 @@
848 848  
849 849  (% style="color:blue" %)**AT Command:  AT+JN2DL**
850 850  
851 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
852 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
853 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
808 +(% border="1" style="background-color:#f2f2f2; width:538.222px" %)
809 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:228px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:146px" %)**Response**
854 854  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
855 855  OK
856 856  )))
... ... @@ -858,8 +858,8 @@
858 858  
859 859  )))
860 860  
817 +(% style="display:none" %) (%%)
861 861  
862 -
863 863  == 7.9 Public Network Mode ==
864 864  
865 865  
... ... @@ -870,9 +870,8 @@
870 870  
871 871  (% style="color:blue" %)**AT Command:  AT+PNM**
872 872  
873 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
874 -|=(% colspan="3" style="width: 664px;" %)AT+PNM
875 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
829 +(% border="1" style="background-color:#f2f2f2; width:667.222px" %)
830 +|(% style="background-color:#4f81bd; color:white; width:166px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:225px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Response**
876 876  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
877 877  OK
878 878  )))
... ... @@ -887,8 +887,8 @@
887 887  )))
888 888  |(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
889 889  
845 +(% style="display:none" %) (%%)
890 890  
891 -
892 892  == 7.10 Receive Delay1 ==
893 893  
894 894  
... ... @@ -897,9 +897,8 @@
897 897  
898 898  (% style="color:blue" %)**AT Command: AT+RX1DL**
899 899  
900 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
901 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
902 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
855 +(% border="1" style="background-color:#f2f2f2; width:408.222px" %)
856 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:122px" %)**Response**
903 903  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
904 904  OK
905 905  )))
... ... @@ -907,8 +907,8 @@
907 907  
908 908  )))
909 909  
864 +(% style="display:none" %) (%%)
910 910  
911 -
912 912  == 7.11 Receive Delay2 ==
913 913  
914 914  
... ... @@ -917,9 +917,8 @@
917 917  
918 918  (% style="color:blue" %)**AT Command: AT+RX2DL**
919 919  
920 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
921 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
922 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
874 +(% border="1" style="background-color:#f2f2f2; width:481.222px" %)
875 +|(% style="background-color:#4f81bd; color:white; width:175px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:152px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:150px" %)**Response**
923 923  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
924 924  OK
925 925  )))
... ... @@ -927,8 +927,8 @@
927 927  
928 928  )))
929 929  
883 +(% style="display:none" %) (%%)
930 930  
931 -
932 932  == 7.12 Rx2 Window Data Rate ==
933 933  
934 934  
... ... @@ -937,9 +937,8 @@
937 937  
938 938  (% style="color:blue" %)**AT Command:  AT+RX2DR**
939 939  
940 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
941 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
942 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
893 +(% border="1" style="background-color:#f2f2f2; width:525.222px" %)
894 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:232px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:130px" %)**Response**
943 943  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
944 944  OK
945 945  )))
... ... @@ -947,8 +947,8 @@
947 947  
948 948  )))
949 949  
902 +(% style="display:none" %) (%%)
950 950  
951 -
952 952  == 7.13 Rx2 Window Frequency ==
953 953  
954 954  
... ... @@ -957,9 +957,8 @@
957 957  
958 958  (% style="color:blue" %)**AT Command:  AT+RX2FQ**
959 959  
960 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
961 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
962 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
912 +(% border="1" style="background-color:#f2f2f2; width:587.222px" %)
913 +|(% style="background-color:#4f81bd; color:white; width:183px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:240px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:160px" %)**Response**
963 963  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
964 964  OK
965 965  )))
... ... @@ -967,8 +967,8 @@
967 967  
968 968  )))
969 969  
921 +(% style="display:none" %) (%%)
970 970  
971 -
972 972  == 7.14 Transmit Power ==
973 973  
974 974  
... ... @@ -979,9 +979,8 @@
979 979  
980 980  (% style="color:blue" %)**AT Command:  AT+TXP**
981 981  
982 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
983 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
984 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
933 +(% border="1" style="background-color:#f2f2f2; width:465.222px" %)
934 +|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:189px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:112px" %)**Response**
985 985  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
986 986  OK
987 987  )))
... ... @@ -994,10 +994,10 @@
994 994  If the downlink payload=22000100, it means setting the TXP to 0.
995 995  
996 996  * **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
997 -* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+TXP=0.
947 +* **Example 2**: Downlink Payload: **22000000**  ~/~/ Set AT+TXP=0.
998 998  
949 +(% style="display:none" %) (%%)
999 999  
1000 -
1001 1001  == 7.15 RSSI of the Last Received Packet ==
1002 1002  
1003 1003  
... ... @@ -1006,15 +1006,14 @@
1006 1006  
1007 1007  (% style="color:blue" %)**AT Command:AT+RSSI**
1008 1008  
1009 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
1010 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
1011 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
959 +(% border="1" style="background-color:#f2f2f2; width:557.222px" %)
960 +|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:289px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
1012 1012  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
1013 1013  OK
1014 1014  )))
1015 1015  
965 +(% style="display:none" %) (%%)
1016 1016  
1017 -
1018 1018  == 7.16 SNR of the Last Received Packet ==
1019 1019  
1020 1020  
... ... @@ -1023,15 +1023,14 @@
1023 1023  
1024 1024  (% style="color:blue" %)**AT Command:  AT+SNR**
1025 1025  
1026 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
1027 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
1028 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
975 +(% border="1" style="background-color:#f2f2f2; width:571.222px" %)
976 +|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:290px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
1029 1029  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
1030 1030  OK
1031 1031  )))
1032 1032  
981 +(% style="display:none" %) (%%)
1033 1033  
1034 -
1035 1035  == 7.17 Application Port ==
1036 1036  
1037 1037  
... ... @@ -1040,9 +1040,8 @@
1040 1040  
1041 1041  (% style="color:blue" %)**AT Command: AT+PORT**
1042 1042  
1043 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
1044 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
1045 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
991 +(% border="1" style="background-color:#f2f2f2; width:500.222px" %)
992 +|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:204px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Response**
1046 1046  |(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
1047 1047  OK
1048 1048  )))
... ... @@ -1057,8 +1057,8 @@
1057 1057  * **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1058 1058  * **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1059 1059  
1007 +(% style="display:none" %) (%%)
1060 1060  
1061 -
1062 1062  == 7.18 Single Channel Mode ==
1063 1063  
1064 1064  
... ... @@ -1067,16 +1067,15 @@
1067 1067  
1068 1068  (% style="color:blue" %)**AT Command: AT+CHS**
1069 1069  
1070 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
1071 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
1072 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
1017 +(% border="1" style="background-color:#f2f2f2; width:603.222px" %)
1018 +|(% style="background-color:#4f81bd; color:white; width:182px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:122px" %)**Response**
1073 1073  |(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
1074 1074  OK
1075 1075  )))
1076 1076  |(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
1077 1077  
1024 +(% style="display:none" %) (%%)
1078 1078  
1079 -
1080 1080  == 7.19 Eight Channel Mode ==
1081 1081  
1082 1082  
... ... @@ -1085,9 +1085,8 @@
1085 1085  
1086 1086  (% style="color:blue" %)**AT Command: AT+CHE**
1087 1087  
1088 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1089 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
1090 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1034 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
1035 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
1091 1091  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
1092 1092  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
1093 1093  
... ... @@ -1095,7 +1095,7 @@
1095 1095  )))
1096 1096  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1097 1097  
1098 -(% style="color:blue" %)**Downlink Command: 0x24**
1043 +(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
1099 1099  
1100 1100  Format: Command Code (0x24) followed by 1 bytes channel value.
1101 1101  
... ... @@ -1104,8 +1104,8 @@
1104 1104  * **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1105 1105  * **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1106 1106  
1052 +(% style="display:none" %) (%%)
1107 1107  
1108 -
1109 1109  == 7.20 Get or Set RXwindows1 timeout ==
1110 1110  
1111 1111  
... ... @@ -1114,33 +1114,26 @@
1114 1114  
1115 1115  (% style="color:blue" %)**AT Command: AT+RX1WTO**
1116 1116  
1117 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1118 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1119 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1062 +(% border="1" style="background-color:#f2f2f2; width:460.222px" %)
1063 +|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:201px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:93px" %)**Response**
1120 1120  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
1121 1121  OK
1122 1122  )))
1123 1123  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1124 1124  
1125 -(((
1126 -
1069 +(% style="display:none" %) (%%)
1127 1127  
1128 -
1071 +(((
1129 1129  (% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1130 -
1131 -
1132 1132  )))
1133 1133  
1134 1134  [[image:image-20220526162535-1.png]]
1135 1135  
1136 -
1137 1137  (((
1138 1138  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1139 -
1140 -
1141 -
1142 1142  )))
1143 1143  
1081 +
1144 1144  == 7.21 Get or Set RXwindows2 timeout ==
1145 1145  
1146 1146  
... ... @@ -1149,16 +1149,15 @@
1149 1149  
1150 1150  (% style="color:blue" %)**AT Command: AT+RX2WTO**
1151 1151  
1152 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1153 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1154 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1090 +(% border="1" style="background-color:#f2f2f2; width:497.222px" %)
1091 +|(% style="background-color:#4f81bd; color:white; width:190px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:199px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
1155 1155  |(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
1156 1156  OK
1157 1157  )))
1158 1158  |(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1159 1159  
1097 +(% style="display:none" %) (%%)
1160 1160  
1161 -
1162 1162  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1163 1163  
1164 1164  
... ... @@ -1167,9 +1167,8 @@
1167 1167  
1168 1168  (% style="color:blue" %)**AT Command: AT+DWELLT**
1169 1169  
1170 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1171 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1172 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1107 +(% border="1" style="background-color:#f2f2f2; width:497.222px" %)
1108 +|(% style="background-color:#4f81bd; color:white; width:183px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:179px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:131px" %)**Response**
1173 1173  |(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
1174 1174  OK
1175 1175  )))
... ... @@ -1184,8 +1184,8 @@
1184 1184  * **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1185 1185  * **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1186 1186  
1123 +(% style="display:none" %) (%%)
1187 1187  
1188 -
1189 1189  == 7.23 Set Packet Receiving Response Level ==
1190 1190  
1191 1191  
... ... @@ -1192,7 +1192,7 @@
1192 1192  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1193 1193  
1194 1194  
1195 -**RPL value:**
1131 +(% style="color:blue" %)**RPL value:**
1196 1196  
1197 1197  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1198 1198  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
... ... @@ -1200,7 +1200,7 @@
1200 1200  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1201 1201  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1202 1202  
1203 -**Case Analyes:**
1139 +(% style="color:blue" %)**Case Analyes:**
1204 1204  
1205 1205  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1206 1206  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
... ... @@ -1208,9 +1208,8 @@
1208 1208  
1209 1209  (% style="color:blue" %)**AT Command: AT+RPL**
1210 1210  
1211 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1212 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1213 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1147 +(% border="1" style="background-color:#f2f2f2; width:536.222px" %)
1148 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:263px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:109px" %)**Response**
1214 1214  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
1215 1215  OK
1216 1216  )))
... ... @@ -1225,20 +1225,19 @@
1225 1225  * **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1226 1226  * **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1227 1227  
1163 +(% style="display:none" %) (%%)
1228 1228  
1229 -
1230 1230  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1231 1231  
1232 1232  
1233 1233  (% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1234 1234  
1235 -(% border="1" style="background-color:#ffffcc; color:green; width:589px" %)
1236 -|=(% colspan="3" style="width: 586px;" %)AT+**SETMAXNBTRANS**
1237 -|(% style="width:227px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:87px" %)**Response**
1238 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1170 +(% border="1" style="background-color:#f2f2f2; width:589px" %)
1171 +|(% style="background-color:#4f81bd; color:white; width:227px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:300px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:87px" %)**Response**
1172 +|(% style="width:227px" %)AT+SETMAXNBTRANS=1，0|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1239 1239  OK
1240 1240  )))
1241 -|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1175 +|(% style="width:227px" %)AT+SETMAXNBTRANS=？，1|(% style="width:300px" %)(((
1242 1242  value2: 0: uplink fcnt doesn't change for each NBTrans;
1243 1243  
1244 1244  1: uplink fcnt increase by 1 for each NBTrans.
... ... @@ -1257,16 +1257,20 @@
1257 1257  * Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1258 1258  * Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1259 1259  
1194 +(% style="display:none" %) (%%)
1260 1260  
1261 -
1262 1262  == 7.25 Device offline rejoining （LWS007) ==
1263 1263  
1264 1264  
1265 1265  (% style="color:blue" %)**AT Command: AT+DDETECT**
1266 1266  
1267 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1268 -|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1269 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1201 +AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
1202 +
1203 +* ACK_Timout_1: Unit: min
1204 +* ACK_Timout_2: Unit: min
1205 +
1206 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
1207 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
1270 1270  |(% style="width:160px" %)(((
1271 1271  AT+DDETECT=1,1440,2880
1272 1272  
... ... @@ -1295,50 +1295,51 @@
1295 1295  OK
1296 1296  )))
1297 1297  
1298 -(% style="color:blue" %)**Downlink Command: 0x33**
1236 +(% style="color:blue" %)**Downlink Command: 0x32**
1299 1299  
1300 1300  Format: Command Code (0x32) followed by 2 bytes mode value.
1301 1301  
1302 -If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1240 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1303 1303  
1304 -* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1242 +* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1243 +** 0x01 : Flag
1244 +** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1245 +** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
1246 +** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1305 1305  
1248 +(% style="display:none" %) (%%)
1306 1306  
1307 -
1308 1308  == 7.26 Request the server to send an ACK ==
1309 1309  
1310 1310  
1311 1311  (% style="color:blue" %)**AT Command: AT+PNACKMD**
1312 1312  
1313 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1314 -|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1315 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1316 -|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1255 +(% border="1" style="background-color:#f2f2f2; width:536.222px" %)
1256 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:263px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:109px" %)**Response**
1257 +|(% style="width:160px" %)AT+PNACKMD=1|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1317 1317  OK
1318 1318  )))
1319 -|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1260 +|(% style="width:160px" %)AT+PNACKMD=0|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1320 1320  0
1321 -
1322 1322  OK
1323 1323  )))
1324 1324  
1265 +(% style="display:none" %) (%%)
1325 1325  
1326 -
1327 1327  == 7.27 Adjust network rejoining interval ==
1328 1328  
1329 1329  
1330 1330  (% style="color:blue" %)**AT Command: AT+RJTDC**
1331 1331  
1332 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1333 -|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1334 -|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1335 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1272 +(% border="1" style="background-color:#f2f2f2; width:727.222px" %)
1273 +|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:329px" %)**Response**
1274 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1336 1336  OK
1337 1337  
1338 -the interval is 30000ms = 30s
1277 +the interval is 30 min
1339 1339  )))
1340 -|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1341 -Set the ReJoin data transmission interval to 60000ms = 60 seconds
1279 +|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1280 +Set the ReJoin data transmission interval to 60 min
1342 1342  )))
1343 1343  
1344 1344  (% style="color:blue" %)**Downlink Command: 0x26**
... ... @@ -1347,20 +1347,21 @@
1347 1347  
1348 1348  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1349 1349  
1350 -* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1351 -* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1289 +* **Example 1:** Downlink Payload: 26000A  ~/~/  Set AT+RJTDC=10
1290 +* **Example 2: **Downlink Payload: 260002  ~/~/  Set AT+RJTDC=2
1352 1352  
1292 +(% style="display:none" %) (%%)
1353 1353  
1354 -
1355 1355  = 8. AT Commands Combination =
1356 1356  
1357 1357  == 8.1 Set a fix RX2DR for downlink window ==
1358 1358  
1359 1359  
1360 -* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1361 -* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1299 +* (% style="color:blue" %)**AT+ADR=0             **(%%) **~/~/**  Disable ADR first
1362 1362  
1301 +* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~/~/**  Set xxxx to your wanted DataRate
1363 1363  
1303 +(% style="display:none" %) (%%)
1364 1364  
1365 1365  == 8.2 Use Downlink Command to set a fix uplink DR ==
1366 1366  
... ... @@ -1370,7 +1370,9 @@
1370 1370  **Same as:**
1371 1371  
1372 1372  * AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1313 +
1373 1373  * AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1315 +
1374 1374  * AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1375 1375  
1376 1376  

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0