Last modified by kai on 2024/09/06 10:00
<
From version < 51.22 >
edited by Xiaoling
on 2022/07/13 14:32
To version < 60.5 >
edited by Xiaoling
on 2023/03/27 14:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -9,26 +9,25 @@
9 9  
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 -* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
13 -* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
12 +* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 +* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 15  (((
16 16  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17 -
18 18  )))
19 19  
19 +
20 20  = 2. How to use AT Commands or Downlink command =
21 21  
22 22  
23 -* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 -* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 +* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 +* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
25 25  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
27 27  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
28 28  
29 +(% style="display:none" %) (%%)
29 29  
30 -
31 -
32 32  = 3. Support End Node and firmware version =
33 33  
34 34  
... ... @@ -103,12 +103,10 @@
103 103  )))
104 104  )))
105 105  
105 +(% style="display:none" %) (%%)
106 106  
107 -
108 -
109 109  = 4. System Management Commands =
110 110  
111 -
112 112  == 4.1 Change Uplink Interval ==
113 113  
114 114  
... ... @@ -138,15 +138,14 @@
138 138  )))
139 139  
140 140  (((
141 -If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
138 +If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
142 142  )))
143 143  
144 144  * **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
145 145  * **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
146 146  
144 +(% style="display:none" %) (%%)
147 147  
148 -
149 -
150 150  == 4.2 Reboot End Node ==
151 151  
152 152  
... ... @@ -155,10 +155,10 @@
155 155  
156 156  (% style="color:blue" %)**AT Command: ATZ**
157 157  
158 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
159 -|=(% colspan="3" %)ATZ: Trig a reset of the MCU
160 -|**Command Example**|**Function**|**Response**
161 -|ATZ|Reset MCU|(((
154 +(% border="1" style="background-color:#ffffcc; color:green; width:546px" %)
155 +|=(% colspan="3" style="width: 543px;" %)ATZ: Trig a reset of the MCU
156 +|(% style="width:157px" %)**Command Example**|(% style="width:92px" %)**Function**|(% style="width:294px" %)**Response**
157 +|(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
162 162  Device reset and show booting info
163 163  
164 164  LSN50 Device/LoRa ST Module
... ... @@ -172,7 +172,6 @@
172 172  <followed by the Tx and Rx information>
173 173  )))
174 174  
175 -
176 176  (% style="color:blue" %)**Downlink Command: 0x04**
177 177  
178 178  (((
... ... @@ -180,11 +180,10 @@
180 180  )))
181 181  
182 182  (((
183 -If the downlink payload=**04FF**, the end node will reboot.
184 -
185 -
178 +If the downlink payload=**04FF**, the end node will reboot.
186 186  )))
187 187  
181 +
188 188  == 4.3 Reset to factory Default ==
189 189  
190 190  
... ... @@ -193,10 +193,10 @@
193 193  
194 194  (% style="color:blue" %)**AT Command: AT+FDR**
195 195  
196 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
197 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default
198 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
199 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
190 +(% border="1" style="background-color:#ffffcc; color:green; width:789px" %)
191 +|=(% colspan="3" style="width: 786px;" %)Reset to factory default
192 +|(% style="width:154px" %)**Command Example**|(% style="width:175px" %)**Function**|(% style="width:456px" %)**Response**
193 +|(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
200 200  Device reset to factory default parameters and show booting info
201 201  
202 202  LSN50 Device/LoRa ST Module
... ... @@ -210,7 +210,6 @@
210 210  Please set the parameters or reset Device to apply change
211 211  )))
212 212  
213 -
214 214  (% style="color:blue" %)**Downlink Command: 0x04**
215 215  
216 216  (((
... ... @@ -230,16 +230,15 @@
230 230  
231 231  (% style="color:blue" %)**AT Command: AT+VER**
232 232  
233 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
234 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
235 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
236 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
226 +(% border="1" style="background-color:#ffffcc; color:green; width:542px" %)
227 +|=(% colspan="3" style="width: 539px;" %)AT+VER: Image Version and Frequency Band
228 +|(% style="width:157px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:86px" %)**Response**
229 +|(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
237 237  1.3 EU868
238 238  
239 239  OK
240 240  )))
241 241  
242 -
243 243  (% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
244 244  
245 245  (((
... ... @@ -253,7 +253,6 @@
253 253  (((
254 254  
255 255  
256 -
257 257  **xx: Software Type:**
258 258  )))
259 259  
... ... @@ -312,11 +312,8 @@
312 312  OK
313 313  )))
314 314  
315 -
316 -
317 317  = 5. Keys, IDs and EUIs management =
318 318  
319 -
320 320  == 5.1 Application EUI ==
321 321  
322 322  
... ... @@ -333,8 +333,8 @@
333 333  )))
334 334  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
335 335  
324 +(% style="display:none" %) (%%)
336 336  
337 -
338 338  == 5.2 Application Key ==
339 339  
340 340  
... ... @@ -351,8 +351,8 @@
351 351  )))
352 352  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
353 353  
342 +(% style="display:none" %) (%%)
354 354  
355 -
356 356  == 5.3 Application Session Key ==
357 357  
358 358  
... ... @@ -371,8 +371,8 @@
371 371  OK
372 372  )))
373 373  
362 +(% style="display:none" %) (%%)
374 374  
375 -
376 376  == 5.4 Device Address ==
377 377  
378 378  
... ... @@ -391,8 +391,8 @@
391 391  )))
392 392  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
393 393  
382 +(% style="display:none" %) (%%)
394 394  
395 -
396 396  == 5.5 Device EUI ==
397 397  
398 398  
... ... @@ -411,8 +411,8 @@
411 411  OK
412 412  )))
413 413  
402 +(% style="display:none" %) (%%)
414 414  
415 -
416 416  == 5.6 Network ID ==
417 417  
418 418  
... ... @@ -429,8 +429,8 @@
429 429  )))
430 430  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
431 431  
420 +(% style="display:none" %) (%%)
432 432  
433 -
434 434  == 5.7 Network Session Key ==
435 435  
436 436  
... ... @@ -447,14 +447,12 @@
447 447  )))
448 448  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
449 449  
438 +(% style="display:none" %) (%%)
450 450  
451 -
452 452  = 6. Joining and sending date on LoRaWAN network =
453 453  
454 -
455 455  == 6.1 Confirm Mode ==
456 456  
457 -
458 458  === 6.1.1  AT+CFM command before DR-LWS007 software stack ===
459 459  
460 460  
... ... @@ -472,7 +472,6 @@
472 472  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
473 473  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
474 474  
475 -
476 476  (% style="color:blue" %)**Downlink Command: 0x05**
477 477  
478 478  Format: Command Code (0x05) followed by 2 bytes mode value.
... ... @@ -482,9 +482,8 @@
482 482  * **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
483 483  * **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
484 484  
470 +(% style="display:none" %) (%%)
485 485  
486 -
487 -
488 488  === 6.1.2  AT+CFM command since DR-LWS007 software stack ===
489 489  
490 490  
... ... @@ -521,7 +521,6 @@
521 521  OK
522 522  )))
523 523  
524 -
525 525  (% style="color:blue" %)**Downlink Command: 0x05**
526 526  
527 527  Format: Command Code (0x05) followed by 2 bytes mode value.
... ... @@ -531,9 +531,8 @@
531 531  * **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
532 532  * **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
533 533  
517 +(% style="display:none" %) (%%)
534 534  
535 -
536 -
537 537  == 6.2 Confirm Status ==
538 538  
539 539  
... ... @@ -542,15 +542,13 @@
542 542  
543 543  (% style="color:blue" %)**AT Command: AT+CFS**
544 544  
545 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
546 -|=(% colspan="3" style="width: 531px;" %)AT+CFS
547 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
548 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
527 +(% border="1" style="background-color:#ffffcc; color:green; width:463px" %)
528 +|=(% colspan="3" style="width: 460px;" %)AT+CFS
529 +|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:107px" %)**Response**
530 +|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
549 549  OK
550 550  )))
551 551  
552 -
553 -
554 554  == 6.3 Join LoRa® Network ==
555 555  
556 556  
... ... @@ -568,8 +568,6 @@
568 568  While Error in format, return AT_BUSY_ERROR
569 569  )))
570 570  
571 -
572 -
573 573  == 6.4 LoRa® Network Join Mode ==
574 574  
575 575  
... ... @@ -587,7 +587,6 @@
587 587  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
588 588  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
589 589  
590 -
591 591  (% style="color:blue" %)**Downlink Command: 0x20**
592 592  
593 593  Format: Command Code (0x20) followed by 1 bytes mode value.
... ... @@ -594,12 +594,11 @@
594 594  
595 595  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
596 596  
597 -* **Example 1: **Downlink Payload: **2000  ** ~/~/ Set AT+NJM=0
574 +* **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
598 598  * **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
599 599  
577 +(% style="display:none" %) (%%)
600 600  
601 -
602 -
603 603  == 6.5 LoRa® Network Join Status ==
604 604  
605 605  
... ... @@ -615,8 +615,8 @@
615 615  OK
616 616  )))
617 617  
594 +(% style="display:none" %) (%%)
618 618  
619 -
620 620  == 6.6 Print Last Received Data in Raw Format ==
621 621  
622 622  
... ... @@ -632,8 +632,8 @@
632 632  OK
633 633  )))
634 634  
611 +(% style="display:none" %) (%%)
635 635  
636 -
637 637  == 6.7 Print Last Received Data in Binary Format ==
638 638  
639 639  
... ... @@ -649,8 +649,8 @@
649 649  OK
650 650  )))
651 651  
628 +(% style="display:none" %) (%%)
652 652  
653 -
654 654  == 6.8 Send Text Data ==
655 655  
656 656  
... ... @@ -664,14 +664,11 @@
664 664  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
665 665  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
666 666  While Error in format, return
667 -
668 668  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
669 -
670 -
671 671  )))
672 672  
646 +(% style="display:none" %) (%%)
673 673  
674 -
675 675  == 6.9 Send Hexadecimal Data ==
676 676  
677 677  
... ... @@ -680,21 +680,18 @@
680 680  
681 681  (% style="color:blue" %)**AT Command: AT+SENDB**
682 682  
683 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
684 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
685 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
686 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
687 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
688 -AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
689 -
690 -
656 +(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
657 +|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
658 +|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
659 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
660 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
661 +AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
691 691  )))
692 692  
664 +(% style="display:none" %) (%%)
693 693  
694 -
695 695  = 7. LoRaWAN network management =
696 696  
697 -
698 698  == 7.1 Adaptive Data Rate ==
699 699  
700 700  
... ... @@ -714,7 +714,6 @@
714 714  AT_PARAM_ERROR
715 715  )))
716 716  
717 -
718 718  (% style="color:blue" %)**Downlink Command: 0x22**
719 719  
720 720  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
... ... @@ -722,9 +722,8 @@
722 722  * **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
723 723  * **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
724 724  
694 +(% style="display:none" %) (%%)
725 725  
726 -
727 -
728 728  == 7.2 LoRa® Class ==
729 729  
730 730  
... ... @@ -731,7 +731,7 @@
731 731  Feature: Get or Set the Device Class(Currently only support class A, class C).
732 732  
733 733  
734 -(% style="color:blue" %)**AT Command:AT+CLASS**
702 +(% style="color:blue" %)**AT Command:  AT+CLASS**
735 735  
736 736  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
737 737  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
... ... @@ -740,18 +740,17 @@
740 740  OK
741 741  )))
742 742  |(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((
743 -
744 744  )))
745 745  
713 +(% style="display:none" %) (%%)
746 746  
747 -
748 748  == 7.3 Duty Cycle Setting ==
749 749  
750 750  
751 -Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
718 +Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
752 752  
753 753  
754 -(% style="color:blue" %)**AT Command:AT+DCS**
721 +(% style="color:blue" %)**AT Command:  AT+DCS**
755 755  
756 756  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
757 757  |=(% colspan="3" style="width: 512px;" %)AT+DCS
... ... @@ -760,17 +760,21 @@
760 760  OK
761 761  )))
762 762  |(% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((
763 -
764 764  )))
765 765  
732 +(% style="display:none" %) (%%)
766 766  
767 -
768 768  == 7.4 Data Rate ==
769 769  
770 770  
771 -Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
737 +Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
772 772  
739 +(% style="color:red" %)
740 +**Notice:**
773 773  
742 +* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
743 +* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
744 +
774 774  (% style="color:blue" %)**AT Command: AT+DR**
775 775  
776 776  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
... ... @@ -783,7 +783,6 @@
783 783  
784 784  )))
785 785  
786 -
787 787  (% style="color:blue" %)**Downlink Command: 0x2200aaFF**
788 788  
789 789  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
... ... @@ -791,9 +791,8 @@
791 791  * **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
792 792  * **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
793 793  
764 +(% style="display:none" %) (%%)
794 794  
795 -
796 -
797 797  == 7.5 Frame Counter Downlink ==
798 798  
799 799  
... ... @@ -800,7 +800,7 @@
800 800  Feature: Get or Set the Frame Counter Downlink.
801 801  
802 802  
803 -(% style="color:blue" %)**AT Command:AT+FCD**
772 +(% style="color:blue" %)**AT Command:  AT+FCD**
804 804  
805 805  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
806 806  |=(% colspan="3" style="width: 690px;" %)AT+FCD
... ... @@ -812,14 +812,12 @@
812 812  OK
813 813  )))
814 814  
815 -
816 -
817 817  == 7.6 Frame Counter Uplink ==
818 818  
819 819  Feature: Get or Set the Frame Counter Uplink.
820 820  
821 821  
822 -(% style="color:blue" %)**AT Command:AT+FCU**
789 +(% style="color:blue" %)**AT Command:  AT+FCU**
823 823  
824 824  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
825 825  |=(% colspan="3" style="width: 531px;" %)AT+FCU
... ... @@ -828,11 +828,10 @@
828 828  OK
829 829  )))
830 830  |(% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((
831 -
832 832  )))
833 833  
800 +(% style="display:none" %) (%%)
834 834  
835 -
836 836  == 7.7 Join Accept Delay1 ==
837 837  
838 838  
... ... @@ -839,7 +839,7 @@
839 839  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
840 840  
841 841  
842 -(% style="color:blue" %)**AT Command:AT+JN1DL**
808 +(% style="color:blue" %)**AT Command:  AT+JN1DL**
843 843  
844 844  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
845 845  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
... ... @@ -848,17 +848,17 @@
848 848  OK
849 849  )))
850 850  |(% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((
851 -
852 852  )))
853 853  
819 +(% style="display:none" %) (%%)
854 854  
855 -
856 856  == 7.8 Join Accept Delay2 ==
857 857  
823 +
858 858  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
859 859  
860 860  
861 -(% style="color:blue" %)**AT Command:AT+JN2DL**
827 +(% style="color:blue" %)**AT Command:  AT+JN2DL**
862 862  
863 863  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
864 864  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
... ... @@ -867,20 +867,19 @@
867 867  OK
868 868  )))
869 869  |(% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((
870 -
871 871  )))
872 872  
838 +(% style="display:none" %) (%%)
873 873  
874 -
875 875  == 7.9 Public Network Mode ==
876 876  
877 877  
878 878  Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
879 879  
880 -(% style="color:red" %)Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
845 +(% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
881 881  
882 882  
883 -(% style="color:blue" %)**AT Command:AT+PNM**
848 +(% style="color:blue" %)**AT Command:  AT+PNM**
884 884  
885 885  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
886 886  |=(% colspan="3" style="width: 664px;" %)AT+PNM
... ... @@ -899,8 +899,6 @@
899 899  )))
900 900  |(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
901 901  
902 -
903 -
904 904  == 7.10 Receive Delay1 ==
905 905  
906 906  
... ... @@ -907,7 +907,7 @@
907 907  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
908 908  
909 909  
910 -(% style="color:blue" %)**AT Command:AT+RX1DL**
873 +(% style="color:blue" %)**AT Command: AT+RX1DL**
911 911  
912 912  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
913 913  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
... ... @@ -919,8 +919,6 @@
919 919  
920 920  )))
921 921  
922 -
923 -
924 924  == 7.11 Receive Delay2 ==
925 925  
926 926  
... ... @@ -927,7 +927,7 @@
927 927  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
928 928  
929 929  
930 -(% style="color:blue" %)**AT Command:AT+RX2DL**
891 +(% style="color:blue" %)**AT Command: AT+RX2DL**
931 931  
932 932  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
933 933  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
... ... @@ -939,8 +939,6 @@
939 939  
940 940  )))
941 941  
942 -
943 -
944 944  == 7.12 Rx2 Window Data Rate ==
945 945  
946 946  
... ... @@ -947,7 +947,7 @@
947 947  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
948 948  
949 949  
950 -(% style="color:blue" %)**AT Command:AT+RX2DR**
909 +(% style="color:blue" %)**AT Command:  AT+RX2DR**
951 951  
952 952  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
953 953  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
... ... @@ -959,8 +959,6 @@
959 959  
960 960  )))
961 961  
962 -
963 -
964 964  == 7.13 Rx2 Window Frequency ==
965 965  
966 966  
... ... @@ -967,7 +967,7 @@
967 967  Feature: Get or Set the Rx2 window frequency
968 968  
969 969  
970 -(% style="color:blue" %)**AT Command:AT+RX2FQ**
927 +(% style="color:blue" %)**AT Command:  AT+RX2FQ**
971 971  
972 972  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
973 973  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
... ... @@ -979,16 +979,16 @@
979 979  
980 980  )))
981 981  
982 -
983 -
984 984  == 7.14 Transmit Power ==
985 985  
986 986  
987 987  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
988 988  
944 +(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
989 989  
990 -(% style="color:blue" %)**AT Command:AT+TXP**
991 991  
947 +(% style="color:blue" %)**AT Command:  AT+TXP**
948 +
992 992  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
993 993  |=(% colspan="3" style="width: 462px;" %)AT+TXP
994 994  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -999,7 +999,6 @@
999 999  
1000 1000  )))
1001 1001  
1002 -
1003 1003  Downlink Payload. The 4th byte of 0x22 downlink.
1004 1004  
1005 1005  If the downlink payload=22000100, it means setting the TXP to 0.
... ... @@ -1007,9 +1007,6 @@
1007 1007  * **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
1008 1008  * **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+TXP=0.
1009 1009  
1010 -
1011 -
1012 -
1013 1013  == 7.15 RSSI of the Last Received Packet ==
1014 1014  
1015 1015  
... ... @@ -1025,8 +1025,6 @@
1025 1025  OK
1026 1026  )))
1027 1027  
1028 -
1029 -
1030 1030  == 7.16 SNR of the Last Received Packet ==
1031 1031  
1032 1032  
... ... @@ -1033,7 +1033,7 @@
1033 1033  Feature: Get the SNR of the last received packet
1034 1034  
1035 1035  
1036 -(% style="color:blue" %)**AT Command:AT+SNR**
987 +(% style="color:blue" %)**AT Command:  AT+SNR**
1037 1037  
1038 1038  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
1039 1039  |=(% colspan="3" style="width: 568px;" %)AT+SNR
... ... @@ -1042,8 +1042,6 @@
1042 1042  OK
1043 1043  )))
1044 1044  
1045 -
1046 -
1047 1047  == 7.17 Application Port ==
1048 1048  
1049 1049  
... ... @@ -1060,7 +1060,6 @@
1060 1060  )))
1061 1061  |(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
1062 1062  
1063 -
1064 1064  (% style="color:blue" %)**Downlink Command: 0x23**
1065 1065  
1066 1066  Format: Command Code (0x23) followed by 1 bytes port value.
... ... @@ -1070,8 +1070,6 @@
1070 1070  * **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1071 1071  * **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1072 1072  
1073 -
1074 -
1075 1075  == 7.18 Single Channel Mode ==
1076 1076  
1077 1077  
... ... @@ -1088,10 +1088,9 @@
1088 1088  )))
1089 1089  |(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
1090 1090  
1091 -
1092 -
1093 1093  == 7.19 Eight Channel Mode ==
1094 1094  
1039 +
1095 1095  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1096 1096  
1097 1097  
... ... @@ -1107,9 +1107,8 @@
1107 1107  )))
1108 1108  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1109 1109  
1055 +(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
1110 1110  
1111 -(% style="color:blue" %)**Downlink Command: 0x24**
1112 -
1113 1113  Format: Command Code (0x24) followed by 1 bytes channel value.
1114 1114  
1115 1115  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
... ... @@ -1117,9 +1117,6 @@
1117 1117  * **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1118 1118  * **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1119 1119  
1120 -
1121 -
1122 -
1123 1123  == 7.20 Get or Set RXwindows1 timeout ==
1124 1124  
1125 1125  
... ... @@ -1139,8 +1139,9 @@
1139 1139  (((
1140 1140  
1141 1141  
1142 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1143 1143  
1084 +(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1085 +
1144 1144  
1145 1145  )))
1146 1146  
... ... @@ -1169,8 +1169,6 @@
1169 1169  )))
1170 1170  |(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1171 1171  
1172 -
1173 -
1174 1174  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1175 1175  
1176 1176  
... ... @@ -1187,7 +1187,6 @@
1187 1187  )))
1188 1188  |(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
1189 1189  
1190 -
1191 1191  (% style="color:blue" %)**Downlink Command: 0x25**
1192 1192  
1193 1193  Format: Command Code (0x25) followed by 1 bytes state value.
... ... @@ -1197,9 +1197,6 @@
1197 1197  * **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1198 1198  * **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1199 1199  
1200 -
1201 -
1202 -
1203 1203  == 7.23 Set Packet Receiving Response Level ==
1204 1204  
1205 1205  
... ... @@ -1214,7 +1214,6 @@
1214 1214  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1215 1215  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1216 1216  
1217 -
1218 1218  **Case Analyes:**
1219 1219  
1220 1220  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
... ... @@ -1221,7 +1221,6 @@
1221 1221  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1222 1222  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1223 1223  
1224 -
1225 1225  (% style="color:blue" %)**AT Command: AT+RPL**
1226 1226  
1227 1227  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
... ... @@ -1232,7 +1232,6 @@
1232 1232  )))
1233 1233  |(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
1234 1234  
1235 -
1236 1236  (% style="color:blue" %)**Downlink Command: 0x21**
1237 1237  
1238 1238  Format: Command Code (0x21) followed by 1 bytes level value.
... ... @@ -1242,9 +1242,6 @@
1242 1242  * **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1243 1243  * **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1244 1244  
1245 -
1246 -
1247 -
1248 1248  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1249 1249  
1250 1250  
... ... @@ -1266,7 +1266,6 @@
1266 1266  OK
1267 1267  )))
1268 1268  
1269 -
1270 1270  (% style="color:blue" %)**Downlink Command: 0x33**
1271 1271  
1272 1272  Format: Command Code (0x33) followed by 2 bytes mode value.
... ... @@ -1276,13 +1276,16 @@
1276 1276  * Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1277 1277  * Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1278 1278  
1279 -
1280 -
1281 1281  == 7.25 Device offline rejoining （LWS007) ==
1282 1282  
1283 1283  
1284 1284  (% style="color:blue" %)**AT Command: AT+DDETECT**
1285 1285  
1213 +AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
1214 +
1215 +* ACK_Timout_1: Unit: min
1216 +* ACK_Timout_2: Unit: min
1217 +
1286 1286  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1287 1287  |=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1288 1288  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -1314,17 +1314,18 @@
1314 1314  OK
1315 1315  )))
1316 1316  
1249 +(% style="color:blue" %)**Downlink Command: 0x32**
1317 1317  
1318 -(% style="color:blue" %)**Downlink Command: 0x33**
1319 -
1320 1320  Format: Command Code (0x32) followed by 2 bytes mode value.
1321 1321  
1322 -If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1253 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1323 1323  
1324 -* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1255 +* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1256 +** 0x01 : Flag
1257 +** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1258 +** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
1259 +** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1325 1325  
1326 -
1327 -
1328 1328  == 7.26 Request the server to send an ACK ==
1329 1329  
1330 1330  
... ... @@ -1342,8 +1342,6 @@
1342 1342  OK
1343 1343  )))
1344 1344  
1345 -
1346 -
1347 1347  == 7.27 Adjust network rejoining interval ==
1348 1348  
1349 1349  
... ... @@ -1352,16 +1352,15 @@
1352 1352  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1353 1353  |=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1354 1354  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1355 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1286 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1356 1356  OK
1357 1357  
1358 -the interval is 30000ms = 30s
1289 +the interval is 30 min
1359 1359  )))
1360 -|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1361 -Set the ReJoin data transmission interval to 60000ms = 60 seconds
1291 +|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1292 +Set the ReJoin data transmission interval to 60 min
1362 1362  )))
1363 1363  
1364 -
1365 1365  (% style="color:blue" %)**Downlink Command: 0x26**
1366 1366  
1367 1367  Format: Command Code (0x26) followed by 2 bytes mode value.
... ... @@ -1371,19 +1371,14 @@
1371 1371  * **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1372 1372  * **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1373 1373  
1374 -
1375 -
1376 1376  = 8. AT Commands Combination =
1377 1377  
1378 -
1379 1379  == 8.1 Set a fix RX2DR for downlink window ==
1380 1380  
1381 1381  
1382 -* **AT+ADR=0             ** **~-~->**  Disable ADR first
1383 -* **AT+RX2DR=xxxx**  **~-~->**  Set xxxx to your wanted DataRate
1309 +* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1310 +* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1384 1384  
1385 -
1386 -
1387 1387  == 8.2 Use Downlink Command to set a fix uplink DR ==
1388 1388  
1389 1389  
... ... @@ -1394,3 +1394,5 @@
1394 1394  * AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1395 1395  * AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1396 1396  * AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1322 +
1323 +

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0