Last modified by kai on 2024/09/06 10:00
<
From version < 51.18 >
edited by Xiaoling
on 2022/07/13 14:14
To version < 63.36 >
edited by Xiaoling
on 2023/05/29 14:19
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -9,38 +9,36 @@
9 9  
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 -* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
13 -* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
12 +* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 +* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 15  (((
16 16  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17 -
18 18  )))
19 19  
19 +
20 20  = 2. How to use AT Commands or Downlink command =
21 21  
22 22  
23 -* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 -* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 +* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 +* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
25 25  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
27 27  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
28 28  
29 +(% style="display:none" %) (%%)
29 29  
30 -
31 -
32 32  = 3. Support End Node and firmware version =
33 33  
34 34  
35 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
36 -|=(% colspan="3" style="width: 963px;" %)(((
37 37  Dragino STM32 base hardware Firmware / LoRaWAN stack list
38 -)))
39 -|(% style="width:187px" %)(((
35 +
36 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:966px" %)
37 +|(% style="background-color:#4f81bd; color:white; width:187px" %)(((
40 40  **Model**
41 -)))|(% style="width:330px" %)(((
39 +)))|(% style="background-color:#4f81bd; color:white; width:330px" %)(((
42 42  **Description**
43 -)))|(% style="width:445px" %)(((
41 +)))|(% style="background-color:#4f81bd; color:white; width:445px" %)(((
44 44  **Firmware Version <~-~-> Stack Version**
45 45  )))
46 46  |(% style="width:187px" %)(((
... ... @@ -103,12 +103,10 @@
103 103  )))
104 104  )))
105 105  
104 +(% style="display:none" %) (%%)
106 106  
107 -
108 -
109 109  = 4. System Management Commands =
110 110  
111 -
112 112  == 4.1 Change Uplink Interval ==
113 113  
114 114  
... ... @@ -117,9 +117,8 @@
117 117  
118 118  (% style="color:blue" %)**AT Command: AT+TDC**
119 119  
120 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
121 -|=(% colspan="3" style="width: 724px;" %)AT+TDC
122 -|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
116 +(% border="1" style="background-color:#f2f2f2; width:727.222px" %)
117 +|(% style="background-color:#4F81BD;color:white; width:165px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:227px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:329px" %)**Response**
123 123  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
124 124  OK
125 125  
... ... @@ -138,15 +138,14 @@
138 138  )))
139 139  
140 140  (((
141 -If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
136 +If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
142 142  )))
143 143  
144 -* **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
145 -* **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
139 +* **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
140 +* **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
146 146  
142 +(% style="display:none" %) (%%)
147 147  
148 -
149 -
150 150  == 4.2 Reboot End Node ==
151 151  
152 152  
... ... @@ -155,10 +155,10 @@
155 155  
156 156  (% style="color:blue" %)**AT Command: ATZ**
157 157  
158 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
159 -|=(% colspan="3" %)ATZ: Trig a reset of the MCU
160 -|**Command Example**|**Function**|**Response**
161 -|ATZ|Reset MCU|(((
152 +(% border="1" style="background-color:#f2f2f2; width:546px" %)
153 +|=(% colspan="3" style="width: 543px;background-color:#D9E2F3;color:#0070C0" %)ATZ: Trig a reset of the MCU
154 +|(% style="color:#0070c0; width:157px" %)**Command Example**|(% style="color:#0070c0; width:92px" %)**Function**|(% style="color:#0070c0; width:294px" %)**Response**
155 +|(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
162 162  Device reset and show booting info
163 163  
164 164  LSN50 Device/LoRa ST Module
... ... @@ -179,11 +179,10 @@
179 179  )))
180 180  
181 181  (((
182 -If the downlink payload=**04FF**, the end node will reboot.
183 -
184 -
176 +If the downlink payload=**04FF**, the end node will reboot.
185 185  )))
186 186  
179 +
187 187  == 4.3 Reset to factory Default ==
188 188  
189 189  
... ... @@ -192,10 +192,10 @@
192 192  
193 193  (% style="color:blue" %)**AT Command: AT+FDR**
194 194  
195 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
196 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default
197 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
198 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
188 +(% border="1" style="background-color:#f2f2f2; width:789px" %)
189 +|=(% colspan="3" style="width: 786px;background-color:#D9E2F3;color:#0070C0" %)Reset to factory default
190 +|(% style="color:#0070c0; width:154px" %)**Command Example**|(% style="color:#0070c0; width:175px" %)**Function**|(% style="color:#0070c0; width:456px" %)**Response**
191 +|(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
199 199  Device reset to factory default parameters and show booting info
200 200  
201 201  LSN50 Device/LoRa ST Module
... ... @@ -228,10 +228,10 @@
228 228  
229 229  (% style="color:blue" %)**AT Command: AT+VER**
230 230  
231 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
232 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
233 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
234 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
224 +(% border="1" style="background-color:#f2f2f2; width:542px" %)
225 +|=(% colspan="3" style="width: 539px;background-color:#D9E2F3;color:#0070C0" %)AT+VER: Image Version and Frequency Band
226 +|(% style="color:#0070c0; width:157px" %)**Command Example**|(% style="color:#0070c0; width:295px" %)**Function**|(% style="color:#0070c0; width:86px" %)**Response**
227 +|(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
235 235  1.3 EU868
236 236  
237 237  OK
... ... @@ -250,7 +250,6 @@
250 250  (((
251 251  
252 252  
253 -
254 254  **xx: Software Type:**
255 255  )))
256 256  
... ... @@ -292,28 +292,22 @@
292 292  
293 293  (% style="color:blue" %)**AT Command: AT+CFG**
294 294  
295 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
296 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
297 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
287 +(% border="1" style="background-color:#f2f2f2; width:599.222px" %)
288 +|=(% colspan="3" style="width: 596px;background-color:#D9E2F3;color:#0070C0" %)AT+CFG: Print all configurations
289 +|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:154px" %)**Function**|(% style="color:#0070c0; width:280px" %)**Response**
298 298  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
299 299  AT+DEUI = XX XX XX XX XX XX XX XX
300 -
301 301  AT+DADDR=XXXXXXXX
302 -
303 303  ……….
304 -
305 305  AT+RX2WTO=X
306 -
307 307  AT+CHS=868100000
308 -
309 309  OK
310 310  )))
311 311  
299 +(% style="display:none" %) (%%)
312 312  
313 -
314 314  = 5. Keys, IDs and EUIs management =
315 315  
316 -
317 317  == 5.1 Application EUI ==
318 318  
319 319  
... ... @@ -322,16 +322,16 @@
322 322  
323 323  (% style="color:blue" %)**AT Command: AT+APPEUI**
324 324  
325 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
326 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI
327 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
311 +(% border="1" style="background-color:#f2f2f2; width:686.222px" %)
312 +|=(% colspan="3" style="width: 683px;background-color:#D9E2F3;color:#0070C0" %)AT+APPEUI
313 +|(% style="color:#0070c0; width:305px" %)**Command Example**|(% style="color:#0070c0; width:186px" %)**Function**|(% style="color:#0070c0; width:191px" %)**Response**
328 328  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
329 329  OK
330 330  )))
331 331  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
332 332  
319 +(% style="display:none" %) (%%)
333 333  
334 -
335 335  == 5.2 Application Key ==
336 336  
337 337  
... ... @@ -340,16 +340,16 @@
340 340  
341 341  (% style="color:blue" %)**AT Command: AT+APPKEY**
342 342  
343 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
344 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY
345 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
329 +(% border="1" style="background-color:#f2f2f2; width:976.222px" %)
330 +|=(% colspan="3" style="width: 973px;background-color:#D9E2F3;color:#0070C0" %)AT+APPKEY
331 +|(% style="color:#0070c0; width:441px" %)**Command Example**|(% style="color:#0070c0; width:180px" %)**Function**|(% style="color:#0070c0; width:350px" %)**Response**
346 346  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
347 347  OK
348 348  )))
349 349  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
350 350  
337 +(% style="display:none" %) (%%)
351 351  
352 -
353 353  == 5.3 Application Session Key ==
354 354  
355 355  
... ... @@ -358,9 +358,9 @@
358 358  
359 359  (% style="color:blue" %)**AT Command: AT+APPSKEY**
360 360  
361 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
362 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
363 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
347 +(% border="1" style="background-color:#f2f2f2; width:1040.22px" %)
348 +|=(% colspan="3" style="width: 1037px;background-color:#D9E2F3;color:#0070C0" %)AT+APPSKEY
349 +|(% style="color:#0070c0; width:451px" %)**Command Example**|(% style="color:#0070c0; width:231px" %)**Function**|(% style="color:#0070c0; width:354px" %)**Response**
364 364  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
365 365  OK
366 366  )))
... ... @@ -368,8 +368,8 @@
368 368  OK
369 369  )))
370 370  
357 +(% style="display:none" %) (%%)
371 371  
372 -
373 373  == 5.4 Device Address ==
374 374  
375 375  
... ... @@ -378,9 +378,9 @@
378 378  
379 379  (% style="color:blue" %)**AT Command: AT+DADDR**
380 380  
381 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
382 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR
383 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
367 +(% border="1" style="background-color:#f2f2f2; width:795.222px" %)
368 +|=(% colspan="3" style="width: 792px;background-color:#D9E2F3;color:#0070C0" %)AT+DADDR
369 +|(% style="color:#0070c0; width:192px" %)**Command Example**|(% style="color:#0070c0; width:241px" %)**Function**|(% style="color:#0070c0; width:359px" %)**Response**
384 384  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
385 385  A8 40 41 FF
386 386  
... ... @@ -388,8 +388,8 @@
388 388  )))
389 389  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
390 390  
377 +(% style="display:none" %) (%%)
391 391  
392 -
393 393  == 5.5 Device EUI ==
394 394  
395 395  
... ... @@ -398,9 +398,9 @@
398 398  
399 399  (% style="color:blue" %)**AT Command: AT+DEUI**
400 400  
401 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
402 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI
403 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
387 +(% border="1" style="background-color:#f2f2f2; width:1035.22px" %)
388 +|=(% colspan="3" style="width: 1032px;background-color:#D9E2F3;color:#0070C0" %)AT+DEUI
389 +|(% style="color:#0070c0; width:250px" %)**Command Example**|(% style="color:#0070c0; width:147px" %)**Function**|(% style="color:#0070c0; width:634px" %)**Response**
404 404  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
405 405  OK
406 406  )))
... ... @@ -408,8 +408,8 @@
408 408  OK
409 409  )))
410 410  
397 +(% style="display:none" %) (%%)
411 411  
412 -
413 413  == 5.6 Network ID ==
414 414  
415 415  
... ... @@ -418,16 +418,16 @@
418 418  
419 419  (% style="color:blue" %)**AT Command: AT+NWKID**
420 420  
421 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
422 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID
423 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
407 +(% border="1" style="background-color:#f2f2f2; width:448.222px" %)
408 +|=(% colspan="3" style="width: 445px;background-color:#D9E2F3;color:#0070C0" %)AT+NWKID
409 +|(% style="color:#0070c0; width:191px" %)**Command Example**|(% style="color:#0070c0; width:153px" %)**Function**|(% style="color:#0070c0; width:101px" %)**Response**
424 424  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
425 425  OK
426 426  )))
427 427  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
428 428  
415 +(% style="display:none" %) (%%)
429 429  
430 -
431 431  == 5.7 Network Session Key ==
432 432  
433 433  
... ... @@ -436,22 +436,20 @@
436 436  
437 437  (% style="color:blue" %)**AT Command: AT+NWKSKEY**
438 438  
439 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
440 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
441 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
425 +(% border="1" style="background-color:#f2f2f2; width:1017.22px" %)
426 +|=(% colspan="3" style="width: 1014px;background-color:#D9E2F3;;color:#0070C0" %)AT+NWKSKEY
427 +|(% style="color:#0070c0; width:455px" %)**Command Example**|(% style="color:#0070c0; width:215px" %)**Function**|(% style="color:#0070c0; width:343px" %)**Response**
442 442  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
443 443  OK
444 444  )))
445 445  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
446 446  
433 +(% style="display:none" %) (%%)
447 447  
448 -
449 449  = 6. Joining and sending date on LoRaWAN network =
450 450  
451 -
452 452  == 6.1 Confirm Mode ==
453 453  
454 -
455 455  === 6.1.1  AT+CFM command before DR-LWS007 software stack ===
456 456  
457 457  
... ... @@ -460,9 +460,9 @@
460 460  
461 461  (% style="color:blue" %)**AT Command: AT+CFM**
462 462  
463 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
447 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
448 +|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+CFM
449 +|(% style="color:#0070c0; width:155px" %)**Command Example**|(% style="color:#0070c0; width:205px" %)**Function**|(% style="color:#0070c0; width:346px" %)**Response**
466 466  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
467 467  OK
468 468  )))
... ... @@ -475,20 +475,19 @@
475 475  
476 476  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
477 477  
478 -* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
479 -* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
462 +* **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
463 +* **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
480 480  
465 +(% style="display:none" %) (%%)
481 481  
482 -
483 -
484 484  === 6.1.2  AT+CFM command since DR-LWS007 software stack ===
485 485  
486 486  
487 487  (% style="color:blue" %)**AT Command: AT+CFM**
488 488  
489 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
490 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
491 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
472 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
473 +|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+CFM
474 +|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:198px" %)**Function**|(% style="color:#0070c0; width:349px" %)**Response**
492 492  |(% style="width:160px" %)(((
493 493  AT+CFM=1,0,0
494 494  
... ... @@ -523,12 +523,11 @@
523 523  
524 524  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
525 525  
526 -* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
527 -* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
509 +* **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
510 +* **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
528 528  
512 +(% style="display:none" %) (%%)
529 529  
530 -
531 -
532 532  == 6.2 Confirm Status ==
533 533  
534 534  
... ... @@ -537,15 +537,15 @@
537 537  
538 538  (% style="color:blue" %)**AT Command: AT+CFS**
539 539  
540 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
541 -|=(% colspan="3" style="width: 531px;" %)AT+CFS
542 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
543 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
522 +(% border="1" style="background-color:#f2f2f2; width:463px" %)
523 +|=(% colspan="3" style="width: 460px;background-color:#D9E2F3;color:#0070C0" %)AT+CFS
524 +|(% style="color:#0070c0; width:156px" %)**Command Example**|(% style="color:#0070c0; width:193px" %)**Function**|(% style="color:#0070c0; width:107px" %)**Response**
525 +|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
544 544  OK
545 545  )))
546 546  
529 +(% style="display:none" %) (%%)
547 547  
548 -
549 549  == 6.3 Join LoRa® Network ==
550 550  
551 551  
... ... @@ -554,17 +554,16 @@
554 554  
555 555  (% style="color:blue" %)**AT Command: AT+JOIN**
556 556  
557 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
558 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN
559 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
539 +(% border="1" style="background-color:#f2f2f2; width:647.222px" %)
540 +|=(% colspan="3" style="width: 644px;background-color:#D9E2F3;color:#0070C0" %)AT+JOIN
541 +|(% style="color:#0070c0; width:163px" %)**Command Example**|(% style="color:#0070c0; width:147px" %)**Function**|(% style="color:#0070c0; width:334px" %)**Response**
560 560  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
561 561  OK
562 -
563 563  While Error in format, return AT_BUSY_ERROR
564 564  )))
565 565  
547 +(% style="display:none" %) (%%)
566 566  
567 -
568 568  == 6.4 LoRa® Network Join Mode ==
569 569  
570 570  
... ... @@ -573,9 +573,9 @@
573 573  
574 574  (% style="color:blue" %)**AT Command: AT+NJM**
575 575  
576 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
577 -|=(% colspan="3" style="width: 750px;" %)AT+NJM
578 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
557 +(% border="1" style="background-color:#f2f2f2; width:753.222px" %)
558 +|=(% colspan="3" style="width: 750px;background-color:#D9E2F3;color:#0070C0" %)AT+NJM
559 +|(% style="color:#0070c0; width:162px" %)**Command Example**|(% style="color:#0070c0; width:227px" %)**Function**|(% style="color:#0070c0; width:361px" %)**Response**
579 579  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
580 580  OK
581 581  )))
... ... @@ -588,12 +588,11 @@
588 588  
589 589  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
590 590  
591 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
592 -* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
572 +* **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
573 +* **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
593 593  
575 +(% style="display:none" %) (%%)
594 594  
595 -
596 -
597 597  == 6.5 LoRa® Network Join Status ==
598 598  
599 599  
... ... @@ -602,15 +602,15 @@
602 602  
603 603  (% style="color:blue" %)**AT Command: AT+NJS**
604 604  
605 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
606 -|=(% colspan="3" style="width: 495px;" %)AT+NJS
607 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
585 +(% border="1" style="background-color:#f2f2f2; width:498.222px" %)
586 +|=(% colspan="3" style="width: 495px;background-color:#D9E2F3;color:#0070C0" %)AT+NJS
587 +|(% style="color:#0070c0; width:169px" %)**Command Example**|(% style="color:#0070c0; width:164px" %)**Function**|(% style="color:#0070c0; width:161px" %)**Response**
608 608  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
609 609  OK
610 610  )))
611 611  
592 +(% style="display:none" %) (%%)
612 612  
613 -
614 614  == 6.6 Print Last Received Data in Raw Format ==
615 615  
616 616  
... ... @@ -619,15 +619,15 @@
619 619  
620 620  (% style="color:blue" %)**AT Command: AT+RECV**
621 621  
622 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
623 -|=(% colspan="3" style="width: 584px;" %)AT+RECV
624 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
602 +(% border="1" style="background-color:#f2f2f2; width:587.222px" %)
603 +|=(% colspan="3" style="width: 584px;background-color:#D9E2F3;color:#0070C0" %)AT+RECV
604 +|(% style="color:#0070c0; width:161px" %)**Command Example**|(% style="color:#0070c0; width:272px" %)**Function**|(% style="color:#0070c0; width:150px" %)**Response**
625 625  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
626 626  OK
627 627  )))
628 628  
609 +(% style="display:none" %) (%%)
629 629  
630 -
631 631  == 6.7 Print Last Received Data in Binary Format ==
632 632  
633 633  
... ... @@ -636,15 +636,15 @@
636 636  
637 637  (% style="color:blue" %)**AT Command: AT+RECVB**
638 638  
639 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
640 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB
641 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
619 +(% border="1" style="background-color:#f2f2f2; width:793.222px" %)
620 +|=(% colspan="3" style="width: 790px;background-color:#D9E2F3;color:#0070C0" %)AT+RECVB
621 +|(% style="color:#0070c0; width:173px" %)**Command Example**|(% style="color:#0070c0; width:497px" %)**Function**|(% style="color:#0070c0; width:120px" %)**Response**
642 642  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
643 643  OK
644 644  )))
645 645  
626 +(% style="display:none" %) (%%)
646 646  
647 -
648 648  == 6.8 Send Text Data ==
649 649  
650 650  
... ... @@ -653,19 +653,16 @@
653 653  
654 654  (% style="color:blue" %)**AT Command: AT+SEND**
655 655  
656 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
657 -|=(% colspan="3" style="width: 988px;" %)AT+SEND
658 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
636 +(% border="1" style="background-color:#f2f2f2; width:991.222px" %)
637 +|=(% colspan="3" style="width: 988px;background-color:#D9E2F3;color:#0070C0" %)AT+SEND
638 +|(% style="color:#0070c0; width:201px" %)**Command Example**|(% style="color:#0070c0; width:340px" %)**Function**|(% style="color:#0070c0; width:446px" %)**Response**
659 659  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
660 660  While Error in format, return
661 -
662 662  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
663 -
664 -
665 665  )))
666 666  
644 +(% style="display:none" %) (%%)
667 667  
668 -
669 669  == 6.9 Send Hexadecimal Data ==
670 670  
671 671  
... ... @@ -674,21 +674,18 @@
674 674  
675 675  (% style="color:blue" %)**AT Command: AT+SENDB**
676 676  
677 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
678 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
679 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
680 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
681 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
682 -AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
683 -
684 -
654 +(% border="1" style="background-color:f2f2f2; width:1101px" %)
655 +|=(% colspan="3" style="width: 1098px;background-color:#D9E2F3;color:#0070C0" %)AT+SENDB
656 +|(% style="color:#0070c0; width:257px" %)**Command Example**|(% style="color:#0070c0; width:394px" %)**Function**|(% style="color:#0070c0; width:446px" %)**Response**
657 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
658 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
659 +AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
685 685  )))
686 686  
662 +(% style="display:none" %) (%%)
687 687  
688 -
689 689  = 7. LoRaWAN network management =
690 690  
691 -
692 692  == 7.1 Adaptive Data Rate ==
693 693  
694 694  
... ... @@ -697,9 +697,9 @@
697 697  
698 698  (% style="color:blue" %)**AT Command: AT+ADR**
699 699  
700 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
701 -|=(% colspan="3" style="width: 680px;" %)AT+ADR
702 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
674 +(% border="1" style="background-color:f2f2f2; width:683.222px" %)
675 +|=(% colspan="3" style="width: 680px;background-color:#D9E2F3;color:#0070C0" %)AT+ADR
676 +|(% style="color:#0070c0; width:162px" %)**Command Example**|(% style="color:#0070c0; width:266px" %)**Function**|(% style="color:#0070c0; width:250px" %)**Response**
703 703  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
704 704  OK
705 705  )))
... ... @@ -708,17 +708,15 @@
708 708  AT_PARAM_ERROR
709 709  )))
710 710  
711 -
712 712  (% style="color:blue" %)**Downlink Command: 0x22**
713 713  
714 714  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
715 715  
716 -* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
717 -* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
689 +* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
690 +* **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
718 718  
692 +(% style="display:none" %) (%%)
719 719  
720 -
721 -
722 722  == 7.2 LoRa® Class ==
723 723  
724 724  
... ... @@ -725,11 +725,11 @@
725 725  Feature: Get or Set the Device Class(Currently only support class A, class C).
726 726  
727 727  
728 -(% style="color:blue" %)**AT Command:AT+CLASS**
700 +(% style="color:blue" %)**AT Command:  AT+CLASS**
729 729  
730 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
731 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS
732 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
702 +(% border="1" style="background-color:#f2f2f2; width:507.222px" %)
703 +|=(% colspan="3" style="width: 504px;background-color:#D9E2F3;color:#0070C0" %)AT+CLASS
704 +|(% style="color:#0070c0; width:163px" %)**Command Example**|(% style="color:#0070c0; width:166px" %)**Function**|(% style="color:#0070c0; width:175px" %)**Response**
733 733  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
734 734  OK
735 735  )))
... ... @@ -737,19 +737,24 @@
737 737  
738 738  )))
739 739  
712 +(% style="display:none" %)
740 740  
714 +(% style="color:red" %)**Notice:**
741 741  
716 +* Run AT+FDR before running AT+CLASS=C
717 +* After change to Class=C, Before OTAA Join Successfule, the end node will still shows to use CLASS=A for OTAA Joined. It will use CLASS=C after OTAA Join Succeccful.
718 +
742 742  == 7.3 Duty Cycle Setting ==
743 743  
744 744  
745 -Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
722 +Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
746 746  
747 747  
748 -(% style="color:blue" %)**AT Command:AT+DCS**
725 +(% style="color:blue" %)**AT Command:  AT+DCS**
749 749  
750 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
751 -|=(% colspan="3" style="width: 512px;" %)AT+DCS
752 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
727 +(% border="1" style="background-color:#f2f2f2; width:515.222px" %)
728 +|=(% colspan="3" style="width: 512px;background-color:#D9E2F3;color:#0070C0" %)AT+DCS
729 +|(% style="color:#0070c0; width:165px" %)**Command Example**|(% style="color:#0070c0; width:239px" %)**Function**|(% style="color:#0070c0; width:107px" %)**Response**
753 753  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
754 754  OK
755 755  )))
... ... @@ -757,19 +757,24 @@
757 757  
758 758  )))
759 759  
737 +(% style="display:none" %) (%%)
760 760  
761 -
762 762  == 7.4 Data Rate ==
763 763  
764 764  
765 -Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
742 +Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
766 766  
744 +(% style="color:red" %)
745 +**Notice:**
767 767  
747 +* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
748 +* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
749 +
768 768  (% style="color:blue" %)**AT Command: AT+DR**
769 769  
770 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
771 -|=(% colspan="3" style="width: 463px;" %)AT+DR
772 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
752 +(% border="1" style="background-color:#f2f2f2; width:466.222px" %)
753 +|=(% colspan="3" style="width: 463px;background-color:#D9E2F3;color:#0070C0" %)AT+DR
754 +|(% style="color:#0070c0; width:156px" %)**Command Example**|(% style="color:#0070c0; width:167px" %)**Function**|(% style="color:#0070c0; width:140px" %)**Response**
773 773  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
774 774  OK
775 775  )))
... ... @@ -777,17 +777,15 @@
777 777  
778 778  )))
779 779  
780 -
781 781  (% style="color:blue" %)**Downlink Command: 0x2200aaFF**
782 782  
783 783  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
784 784  
785 -* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
786 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
766 +* **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
767 +* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
787 787  
769 +(% style="display:none" %) (%%)
788 788  
789 -
790 -
791 791  == 7.5 Frame Counter Downlink ==
792 792  
793 793  
... ... @@ -794,11 +794,11 @@
794 794  Feature: Get or Set the Frame Counter Downlink.
795 795  
796 796  
797 -(% style="color:blue" %)**AT Command:AT+FCD**
777 +(% style="color:blue" %)**AT Command:  AT+FCD**
798 798  
799 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
800 -|=(% colspan="3" style="width: 690px;" %)AT+FCD
801 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
779 +(% border="1" style="background-color:#f2f2f2; width:693.222px" %)
780 +|=(% colspan="3" style="width: 690px;background-color:#D9E2F3;color:#0070C0" %)AT+FCD
781 +|(% style="color:#0070c0; width:162px" %)**Command Example**|(% style="color:#0070c0; width:258px" %)**Function**|(% style="color:#0070c0; width:269px" %)**Response**
802 802  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
803 803  OK
804 804  )))
... ... @@ -806,18 +806,18 @@
806 806  OK
807 807  )))
808 808  
789 +(% style="display:none" %) (%%)
809 809  
810 -
811 811  == 7.6 Frame Counter Uplink ==
812 812  
813 813  Feature: Get or Set the Frame Counter Uplink.
814 814  
815 815  
816 -(% style="color:blue" %)**AT Command:AT+FCU**
796 +(% style="color:blue" %)**AT Command:  AT+FCU**
817 817  
818 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
819 -|=(% colspan="3" style="width: 531px;" %)AT+FCU
820 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
798 +(% border="1" style="background-color:#f2f2f2; width:534.222px" %)
799 +|=(% colspan="3" style="width: 531px;background-color:#D9E2F3;color:#0070C0" %)AT+FCU
800 +|(% style="color:#0070c0; width:177px" %)**Command Example**|(% style="color:#0070c0; width:239px" %)**Function**|(% style="color:#0070c0; width:113px" %)**Response**
821 821  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
822 822  OK
823 823  )))
... ... @@ -825,8 +825,8 @@
825 825  
826 826  )))
827 827  
808 +(% style="display:none" %) (%%)
828 828  
829 -
830 830  == 7.7 Join Accept Delay1 ==
831 831  
832 832  
... ... @@ -833,11 +833,11 @@
833 833  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
834 834  
835 835  
836 -(% style="color:blue" %)**AT Command:AT+JN1DL**
816 +(% style="color:blue" %)**AT Command:  AT+JN1DL**
837 837  
838 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
839 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
840 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
818 +(% border="1" style="background-color:#f2f2f2; width:537.222px" %)
819 +|=(% colspan="3" style="width: 534px;background-color:#D9E2F3;color:#0070C0" %)AT+JN1DL
820 +|(% style="color:#0070c0; width:164px" %)**Command Example**|(% style="color:#0070c0; width:229px" %)**Function**|(% style="color:#0070c0; width:140px" %)**Response**
841 841  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
842 842  OK
843 843  )))
... ... @@ -845,18 +845,19 @@
845 845  
846 846  )))
847 847  
828 +(% style="display:none" %) (%%)
848 848  
849 -
850 850  == 7.8 Join Accept Delay2 ==
851 851  
832 +
852 852  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
853 853  
854 854  
855 -(% style="color:blue" %)**AT Command:AT+JN2DL**
836 +(% style="color:blue" %)**AT Command:  AT+JN2DL**
856 856  
857 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
858 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
859 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
838 +(% border="1" style="background-color:#f2f2f2; width:538.222px" %)
839 +|=(% colspan="3" style="width: 535px;background-color:#D9E2F3;color:#0070C0" %)AT+JN2DL
840 +|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:228px" %)**Function**|(% style="color:#0070c0; width:146px" %)**Response**
860 860  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
861 861  OK
862 862  )))
... ... @@ -864,21 +864,21 @@
864 864  
865 865  )))
866 866  
848 +(% style="display:none" %) (%%)
867 867  
868 -
869 869  == 7.9 Public Network Mode ==
870 870  
871 871  
872 872  Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
873 873  
874 -(% style="color:red" %)Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
855 +(% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
875 875  
876 876  
877 -(% style="color:blue" %)**AT Command:AT+PNM**
858 +(% style="color:blue" %)**AT Command:  AT+PNM**
878 878  
879 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
880 -|=(% colspan="3" style="width: 664px;" %)AT+PNM
881 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
860 +(% border="1" style="background-color:#f2f2f2; width:667.222px" %)
861 +|=(% colspan="3" style="width: 664px;background-color:#D9E2F3;color:#0070C0" %)AT+PNM
862 +|(% style="color:#0070c0; width:166px" %)**Command Example**|(% style="color:#0070c0; width:225px" %)**Function**|(% style="color:#0070c0; width:272px" %)**Response**
882 882  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
883 883  OK
884 884  )))
... ... @@ -893,8 +893,8 @@
893 893  )))
894 894  |(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
895 895  
877 +(% style="display:none" %) (%%)
896 896  
897 -
898 898  == 7.10 Receive Delay1 ==
899 899  
900 900  
... ... @@ -901,11 +901,11 @@
901 901  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
902 902  
903 903  
904 -(% style="color:blue" %)**AT Command:AT+RX1DL**
885 +(% style="color:blue" %)**AT Command: AT+RX1DL**
905 905  
906 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
907 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
908 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
887 +(% border="1" style="background-color:#f2f2f2; width:408.222px" %)
888 +|=(% colspan="3" style="width: 405px;background-color:#D9E2F3;color:#0070C0" %)AT+RX1DL
889 +|(% style="color:#0070c0; width:155px" %)**Command Example**|(% style="color:#0070c0; width:128px" %)**Function**|(% style="color:#0070c0; width:122px" %)**Response**
909 909  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
910 910  OK
911 911  )))
... ... @@ -913,6 +913,7 @@
913 913  
914 914  )))
915 915  
897 +(% style="display:none" %) (%%)
916 916  
917 917  == 7.11 Receive Delay2 ==
918 918  
... ... @@ -920,11 +920,11 @@
920 920  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
921 921  
922 922  
923 -(% style="color:blue" %)**AT Command:AT+RX2DL**
905 +(% style="color:blue" %)**AT Command: AT+RX2DL**
924 924  
925 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
926 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
927 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
907 +(% border="1" style="background-color:#f2f2f2; width:481.222px" %)
908 +|=(% colspan="3" style="width: 478px;background-color:#D9E2F3;color:#0070C0" %)AT+RX2DL
909 +|(% style="color:#0070c0; width:175px" %)**Command Example**|(% style="color:#0070c0; width:152px" %)**Function**|(% style="color:#0070c0; width:150px" %)**Response**
928 928  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
929 929  OK
930 930  )))
... ... @@ -932,6 +932,7 @@
932 932  
933 933  )))
934 934  
917 +(% style="display:none" %) (%%)
935 935  
936 936  == 7.12 Rx2 Window Data Rate ==
937 937  
... ... @@ -939,11 +939,11 @@
939 939  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
940 940  
941 941  
942 -(% style="color:blue" %)**AT Command:AT+RX2DR**
925 +(% style="color:blue" %)**AT Command:  AT+RX2DR**
943 943  
944 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
945 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
946 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
927 +(% border="1" style="background-color:#f2f2f2; width:525.222px" %)
928 +|=(% colspan="3" style="width: 522px;background-color:#D9E2F3;color:#0070C0" %)AT+RX2DR
929 +|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:232px" %)**Function**|(% style="color:#0070c0; width:130px" %)**Response**
947 947  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
948 948  OK
949 949  )))
... ... @@ -951,6 +951,7 @@
951 951  
952 952  )))
953 953  
937 +(% style="display:none" %) (%%)
954 954  
955 955  == 7.13 Rx2 Window Frequency ==
956 956  
... ... @@ -958,11 +958,11 @@
958 958  Feature: Get or Set the Rx2 window frequency
959 959  
960 960  
961 -(% style="color:blue" %)**AT Command:AT+RX2FQ**
945 +(% style="color:blue" %)**AT Command:  AT+RX2FQ**
962 962  
963 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
964 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
965 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
947 +(% border="1" style="background-color:#f2f2f2; width:587.222px" %)
948 +|=(% colspan="3" style="width: 584px;background-color:#D9E2F3;color:#0070C0" %)AT+RX2FQ
949 +|(% style="color:#0070c0; width:183px" %)**Command Example**|(% style="color:#0070c0; width:240px" %)**Function**|(% style="color:#0070c0; width:160px" %)**Response**
966 966  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
967 967  OK
968 968  )))
... ... @@ -970,6 +970,7 @@
970 970  
971 971  )))
972 972  
957 +(% style="display:none" %) (%%)
973 973  
974 974  == 7.14 Transmit Power ==
975 975  
... ... @@ -976,12 +976,14 @@
976 976  
977 977  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
978 978  
964 +(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
979 979  
980 -(% style="color:blue" %)**AT Command:AT+TXP**
981 981  
982 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
983 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
984 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
967 +(% style="color:blue" %)**AT Command:  AT+TXP**
968 +
969 +(% border="1" style="background-color:#f2f2f2; width:465.222px" %)
970 +|=(% colspan="3" style="width: 462px;background-color:#D9E2F3;color:#0070C0" %)AT+TXP
971 +|(% style="color:#0070c0; width:161px" %)**Command Example**|(% style="color:#0070c0; width:189px" %)**Function**|(% style="color:#0070c0; width:112px" %)**Response**
985 985  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
986 986  OK
987 987  )))
... ... @@ -993,11 +993,11 @@
993 993  
994 994  If the downlink payload=22000100, it means setting the TXP to 0.
995 995  
996 -* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
997 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
983 +* **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
984 +* **Example 2**: Downlink Payload: **22000000**  ~/~/ Set AT+TXP=0.
998 998  
986 +(% style="display:none" %) (%%)
999 999  
1000 -
1001 1001  == 7.15 RSSI of the Last Received Packet ==
1002 1002  
1003 1003  
... ... @@ -1006,13 +1006,14 @@
1006 1006  
1007 1007  (% style="color:blue" %)**AT Command:AT+RSSI**
1008 1008  
1009 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
1010 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
1011 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
996 +(% border="1" style="background-color:#f2f2f2; width:557.222px" %)
997 +|=(% colspan="3" style="width: 554px;background-color:#D9E2F3;color:#0070C0" %)AT+RSSI
998 +|(% style="color:#0070c0; width:164px" %)**Command Example**|(% style="color:#0070c0; width:289px" %)**Function**|(% style="color:#0070c0; width:100px" %)**Response**
1012 1012  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
1013 1013  OK
1014 1014  )))
1015 1015  
1003 +(% style="display:none" %) (%%)
1016 1016  
1017 1017  == 7.16 SNR of the Last Received Packet ==
1018 1018  
... ... @@ -1020,15 +1020,16 @@
1020 1020  Feature: Get the SNR of the last received packet
1021 1021  
1022 1022  
1023 -(% style="color:blue" %)**AT Command:AT+SNR**
1011 +(% style="color:blue" %)**AT Command:  AT+SNR**
1024 1024  
1025 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
1026 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
1027 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
1013 +(% border="1" style="background-color:#f2f2f2; width:571.222px" %)
1014 +|=(% colspan="3" style="width: 568px;background-color:#D9E2F3;color:#0070C0" %)AT+SNR
1015 +|(% style="color:#0070c0; width:164px" %)**Command Example**|(% style="color:#0070c0; width:290px" %)**Function**|(% style="color:#0070c0; width:113px" %)**Response**
1028 1028  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
1029 1029  OK
1030 1030  )))
1031 1031  
1020 +(% style="display:none" %) (%%)
1032 1032  
1033 1033  == 7.17 Application Port ==
1034 1034  
... ... @@ -1038,9 +1038,9 @@
1038 1038  
1039 1039  (% style="color:blue" %)**AT Command: AT+PORT**
1040 1040  
1041 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
1042 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
1043 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
1030 +(% border="1" style="background-color:#f2f2f2; width:500.222px" %)
1031 +|=(% colspan="3" style="width: 497px;background-color:#D9E2F3;color:#0070C0" %)AT+PORT
1032 +|(% style="color:#0070c0; width:157px" %)**Command Example**|(% style="color:#0070c0; width:204px" %)**Function**|(% style="color:#0070c0; width:135px" %)**Response**
1044 1044  |(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
1045 1045  OK
1046 1046  )))
... ... @@ -1052,11 +1052,11 @@
1052 1052  
1053 1053  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
1054 1054  
1055 -* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
1056 -* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
1044 +* **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1045 +* **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1057 1057  
1047 +(% style="display:none" %) (%%)
1058 1058  
1059 -
1060 1060  == 7.18 Single Channel Mode ==
1061 1061  
1062 1062  
... ... @@ -1065,25 +1065,27 @@
1065 1065  
1066 1066  (% style="color:blue" %)**AT Command: AT+CHS**
1067 1067  
1068 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
1069 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
1070 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
1057 +(% border="1" style="background-color:#f2f2f2; width:603.222px" %)
1058 +|=(% colspan="3" style="width: 600px;background-color:#D9E2F3;color:#0070C0" %)AT+CHS
1059 +|(% style="color:#0070c0; width:182px" %)**Command Example**|(% style="color:#0070c0; width:295px" %)**Function**|(% style="color:#0070c0; width:122px" %)**Response**
1071 1071  |(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
1072 1072  OK
1073 1073  )))
1074 1074  |(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
1075 1075  
1065 +(% style="display:none" %) (%%)
1076 1076  
1077 1077  == 7.19 Eight Channel Mode ==
1078 1078  
1069 +
1079 1079  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1080 1080  
1081 1081  
1082 1082  (% style="color:blue" %)**AT Command: AT+CHE**
1083 1083  
1084 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1085 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
1086 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1075 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
1076 +|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+CHE
1077 +|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:198px" %)**Function**|(% style="color:#0070c0; width:349px" %)**Response**
1087 1087  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
1088 1088  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
1089 1089  
... ... @@ -1091,17 +1091,17 @@
1091 1091  )))
1092 1092  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1093 1093  
1094 -(% style="color:blue" %)**Downlink Command: 0x24**
1085 +(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
1095 1095  
1096 1096  Format: Command Code (0x24) followed by 1 bytes channel value.
1097 1097  
1098 1098  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1099 1099  
1100 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1101 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
1091 +* **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1092 +* **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1102 1102  
1094 +(% style="display:none" %) (%%)
1103 1103  
1104 -
1105 1105  == 7.20 Get or Set RXwindows1 timeout ==
1106 1106  
1107 1107  
... ... @@ -1110,31 +1110,27 @@
1110 1110  
1111 1111  (% style="color:blue" %)**AT Command: AT+RX1WTO**
1112 1112  
1113 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1114 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1115 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1104 +(% border="1" style="background-color:#f2f2f2; width:460.222px" %)
1105 +|=(% colspan="3" style="width: 457px;background-color:#D9E2F3;color:#0070C0" %)AT+ RX1WTO
1106 +|(% style="color:#0070c0; width:163px" %)**Command Example**|(% style="color:#0070c0; width:201px" %)**Function**|(% style="color:#0070c0; width:93px" %)**Response**
1116 1116  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
1117 1117  OK
1118 1118  )))
1119 1119  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1120 1120  
1121 -(((
1122 -
1112 +(% style="display:none" %) (%%)
1123 1123  
1124 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1125 -
1126 -
1114 +(((
1115 +(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1127 1127  )))
1128 1128  
1129 1129  [[image:image-20220526162535-1.png]]
1130 1130  
1131 -
1132 1132  (((
1133 1133  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1134 -
1135 -
1136 1136  )))
1137 1137  
1124 +
1138 1138  == 7.21 Get or Set RXwindows2 timeout ==
1139 1139  
1140 1140  
... ... @@ -1143,14 +1143,15 @@
1143 1143  
1144 1144  (% style="color:blue" %)**AT Command: AT+RX2WTO**
1145 1145  
1146 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1147 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1148 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1133 +(% border="1" style="background-color:#f2f2f2; width:497.222px" %)
1134 +|=(% colspan="3" style="width: 494px;background-color:#D9E2F3;color:#0070C0" %)AT+ RX2WTO
1135 +|(% style="color:#0070c0; width:190px" %)**Command Example**|(% style="color:#0070c0; width:199px" %)**Function**|(% style="color:#0070c0; width:104px" %)**Response**
1149 1149  |(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
1150 1150  OK
1151 1151  )))
1152 1152  |(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1153 1153  
1141 +(% style="display:none" %) (%%)
1154 1154  
1155 1155  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1156 1156  
... ... @@ -1160,9 +1160,9 @@
1160 1160  
1161 1161  (% style="color:blue" %)**AT Command: AT+DWELLT**
1162 1162  
1163 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1164 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1165 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1151 +(% border="1" style="background-color:#f2f2f2; width:497.222px" %)
1152 +|=(% colspan="3" style="width: 494px;background-color:#D9E2F3;color:#0070C0" %)AT+DWELLT
1153 +|(% style="color:#0070c0; width:183px" %)**Command Example**|(% style="color:#0070c0; width:179px" %)**Function**|(% style="color:#0070c0; width:131px" %)**Response**
1166 1166  |(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
1167 1167  OK
1168 1168  )))
... ... @@ -1174,11 +1174,11 @@
1174 1174  
1175 1175  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1176 1176  
1177 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1178 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1165 +* **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1166 +* **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1179 1179  
1168 +(% style="display:none" %) (%%)
1180 1180  
1181 -
1182 1182  == 7.23 Set Packet Receiving Response Level ==
1183 1183  
1184 1184  
... ... @@ -1185,7 +1185,7 @@
1185 1185  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1186 1186  
1187 1187  
1188 -RPL value:
1176 +(% style="color:blue" %)**RPL value:**
1189 1189  
1190 1190  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1191 1191  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
... ... @@ -1193,19 +1193,17 @@
1193 1193  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1194 1194  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1195 1195  
1184 +(% style="color:blue" %)**Case Analyes:**
1196 1196  
1197 -Case Analyes:
1198 -
1199 1199  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1200 1200  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1201 1201  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1202 1202  
1203 -
1204 1204  (% style="color:blue" %)**AT Command: AT+RPL**
1205 1205  
1206 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1207 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1208 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1192 +(% border="1" style="background-color:#f2f2f2; width:536.222px" %)
1193 +|=(% colspan="3" style="width: 533px;background-color:#D9E2F3;color:#0070C0" %)AT+RPL
1194 +|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:263px" %)**Function**|(% style="color:#0070c0; width:109px" %)**Response**
1209 1209  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
1210 1210  OK
1211 1211  )))
... ... @@ -1217,23 +1217,27 @@
1217 1217  
1218 1218  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1219 1219  
1220 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1221 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1206 +* **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1207 +* **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1222 1222  
1209 +(% style="display:none" %) (%%)
1223 1223  
1224 -
1225 1225  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1226 1226  
1227 1227  
1228 1228  (% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1229 1229  
1230 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1231 -|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1232 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1233 -|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1216 +(% border="1" style="background-color:#f2f2f2; width:589px" %)
1217 +|=(% colspan="3" style="width: 586px;background-color:#D9E2F3;color:#0070C0" %)AT+**SETMAXNBTRANS**
1218 +|(% style="color:#0070c0; width:227px" %)**Command Example**|(% style="color:#0070c0; width:300px" %)**Function**|(% style="color:#0070c0; width:87px" %)**Response**
1219 +|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1234 1234  OK
1235 1235  )))
1236 -|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1222 +|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1223 +value2: 0: uplink fcnt doesn't change for each NBTrans;
1224 +
1225 +1: uplink fcnt increase by 1 for each NBTrans.
1226 +)))|(% style="width:87px" %)(((
1237 1237  1
1238 1238  
1239 1239  OK
... ... @@ -1245,19 +1245,24 @@
1245 1245  
1246 1246  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1247 1247  
1248 -* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1249 -* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1238 +* Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1239 +* Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1250 1250  
1241 +(% style="display:none" %) (%%)
1251 1251  
1252 -
1253 1253  == 7.25 Device offline rejoining （LWS007) ==
1254 1254  
1255 1255  
1256 1256  (% style="color:blue" %)**AT Command: AT+DDETECT**
1257 1257  
1258 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1259 -|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1260 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1248 +AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
1249 +
1250 +* ACK_Timout_1: Unit: min
1251 +* ACK_Timout_2: Unit: min
1252 +
1253 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
1254 +|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+**DDETECT**
1255 +|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:198px" %)**Function**|(% style="color:#0070c0; width:349px" %)**Response**
1261 1261  |(% style="width:160px" %)(((
1262 1262  AT+DDETECT=1,1440,2880
1263 1263  
... ... @@ -1286,33 +1286,37 @@
1286 1286  OK
1287 1287  )))
1288 1288  
1289 -(% style="color:blue" %)**Downlink Command: 0x33**
1284 +(% style="color:blue" %)**Downlink Command: 0x32**
1290 1290  
1291 1291  Format: Command Code (0x32) followed by 2 bytes mode value.
1292 1292  
1293 -If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1288 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1294 1294  
1295 -* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1290 +* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1291 +** 0x01 : Flag
1292 +** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1293 +** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
1294 +** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1296 1296  
1296 +(% style="display:none" %) (%%)
1297 1297  
1298 -
1299 1299  == 7.26 Request the server to send an ACK ==
1300 1300  
1301 1301  
1302 1302  (% style="color:blue" %)**AT Command: AT+PNACKMD**
1303 1303  
1304 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1305 -|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1306 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1303 +(% border="1" style="background-color:#f2f2f2; width:536.222px" %)
1304 +|=(% colspan="3" style="width: 533px;background-color:#D9E2F3;color:#0070C0" %)**AT+PNACKMD**
1305 +|(% style="color:#0070c0; width:160px" %)**Command Example**|(% style="color:#0070c0; width:263px" %)**Function**|(% style="color:#0070c0; width:109px" %)**Response**
1307 1307  |(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1308 1308  OK
1309 1309  )))
1310 1310  |(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1311 1311  0
1312 -
1313 1313  OK
1314 1314  )))
1315 1315  
1314 +(% style="display:none" %) (%%)
1316 1316  
1317 1317  == 7.27 Adjust network rejoining interval ==
1318 1318  
... ... @@ -1319,16 +1319,16 @@
1319 1319  
1320 1320  (% style="color:blue" %)**AT Command: AT+RJTDC**
1321 1321  
1322 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1323 -|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1324 -|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1325 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1321 +(% border="1" style="background-color:#f2f2f2; width:727.222px" %)
1322 +|=(% colspan="3" style="width: 724px;background-color:#D9E2F3;color:#0070C0" %)AT+RJTDC
1323 +|(% style="color:#0070c0; width:165px" %)**Command Example**|(% style="color:#0070c0; width:227px" %)**Function**|(% style="color:#0070c0; width:329px" %)**Response**
1324 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1326 1326  OK
1327 1327  
1328 -the interval is 30000ms = 30s
1327 +the interval is 30 min
1329 1329  )))
1330 -|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1331 -Set the ReJoin data transmission interval to 60000ms = 60 seconds
1329 +|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1330 +Set the ReJoin data transmission interval to 60 min
1332 1332  )))
1333 1333  
1334 1334  (% style="color:blue" %)**Downlink Command: 0x26**
... ... @@ -1337,21 +1337,21 @@
1337 1337  
1338 1338  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1339 1339  
1340 -* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1341 -* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1339 +* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1340 +* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1342 1342  
1342 +(% style="display:none" %) (%%)
1343 1343  
1344 -
1345 1345  = 8. AT Commands Combination =
1346 1346  
1347 -
1348 1348  == 8.1 Set a fix RX2DR for downlink window ==
1349 1349  
1350 1350  
1351 -* **AT+ADR=0             ** **~-~->**  Disable ADR first
1352 -* **AT+RX2DR=xxxx**  **~-~->**  Set xxxx to your wanted DataRate
1349 +* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1353 1353  
1351 +* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1354 1354  
1353 +(% style="display:none" %) (%%)
1355 1355  
1356 1356  == 8.2 Use Downlink Command to set a fix uplink DR ==
1357 1357  
... ... @@ -1360,6 +1360,10 @@
1360 1360  
1361 1361  **Same as:**
1362 1362  
1363 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1364 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1365 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1362 +* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1363 +
1364 +* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1365 +
1366 +* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1367 +
1368 +

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0