Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -9,41 +9,35 @@
9	9
10	10	Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11	11
12		-* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
13		-* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
	12	+* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
14	14
	14	+* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
	15	+
15	15	(((
16	16	**This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17		-
18	18	)))
19	19
	20	+
20	20	= 2. How to use AT Commands or Downlink command =
21	21
22	22
23		-* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24		-* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
	24	+* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
	25	+
	26	+* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
25	25	** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26		-** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
	28	+** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
27	27	** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
28	28
	31	+(% style="display:none" %) (%%)
29	29
30		-
31		-
32	32	= 3. Support End Node and firmware version =
33	33
34	34
35		-(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
36		-|=(% colspan="3" style="width: 963px;" %)(((
37	37	Dragino STM32 base hardware Firmware / LoRaWAN stack list
38		-)))
	37	+
	38	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:966px" %)
	39	+|(% style="background-color:#4f81bd; color:white; width:187px" %)**Model**|(% style="background-color:#4f81bd; color:white; width:330px" %)**Description**|(% style="background-color:#4f81bd; color:white; width:445px" %)**Firmware Version <~-~-> Stack Version**
39	39	|(% style="width:187px" %)(((
40		-**Model**
41		-)))|(% style="width:330px" %)(((
42		-**Description**
43		-)))|(% style="width:445px" %)(((
44		-**Firmware Version <~-~-> Stack Version**
45		-)))
46		-|(% style="width:187px" %)(((
47	47	[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
48	48	)))|(% style="width:330px" %)(((
49	49	Open Source Generic LoRaWAN Sensor Node
...	...	@@ -103,12 +103,10 @@
103	103	)))
104	104	)))
105	105
	100	+(% style="display:none" %) (%%)
106	106
107		-
108		-
109	109	= 4. System Management Commands =
110	110
111		-
112	112	== 4.1 Change Uplink Interval ==
113	113
114	114
...	...	@@ -117,9 +117,8 @@
117	117
118	118	(% style="color:blue" %)**AT Command: AT+TDC**
119	119
120		-(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
121		-|=(% colspan="3" style="width: 724px;" %)AT+TDC
122		-|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
	112	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:727.222px" %)
	113	+|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:329px" %)**Response**
123	123	|(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
124	124	OK
125	125
...	...	@@ -130,8 +130,6 @@
130	130	)))
131	131
132	132	(((
133		-
134		-
135	135	(% style="color:blue" %)**Downlink Command: 0x01**
136	136
137	137	Format: Command Code (0x01) followed by 3 bytes time value.
...	...	@@ -138,15 +138,15 @@
138	138	)))
139	139
140	140	(((
141		-If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
	130	+If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
142	142	)))
143	143
144		-* **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
145		-* **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
	133	+* **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
146	146
	135	+* **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
147	147
	137	+(% style="display:none" %) (%%)
148	148
149		-
150	150	== 4.2 Reboot End Node ==
151	151
152	152
...	...	@@ -153,12 +153,11 @@
153	153	Feature: Reboot End Node to perform a new OTAA or ABP Join.
154	154
155	155
156		-(% style="color:blue" %)**AT Command: ATZ**
	145	+(% style="color:blue" %)**AT Command: ATZ  ~/~/ **(%%)Trig a reset of the MCU
157	157
158		-(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
159		-|=(% colspan="3" %)ATZ: Trig a reset of the MCU
160		-|**Command Example**|**Function**|**Response**
161		-|ATZ|Reset MCU|(((
	147	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:546px" %)
	148	+|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:92px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:294px" %)**Response**
	149	+|(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
162	162	Device reset and show booting info
163	163
164	164	LSN50 Device/LoRa ST Module
...	...	@@ -179,11 +179,10 @@
179	179	)))
180	180
181	181	(((
182		-If the downlink payload=**04FF**, the end node will reboot.
183		-
184		-
	170	+If the downlink payload=**04FF**, the end node will reboot.
185	185	)))
186	186
	173	+
187	187	== 4.3 Reset to factory Default ==
188	188
189	189
...	...	@@ -190,12 +190,11 @@
190	190	Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
191	191
192	192
193		-(% style="color:blue" %)**AT Command: AT+FDR**
	180	+(% style="color:blue" %)**AT Command: AT+FDR  ~/~/  **(%%)Reset to factory default
194	194
195		-(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
196		-|=(% colspan="3" style="width: 828px;" %)Reset to factory default
197		-|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
198		-|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
	182	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:789px" %)
	183	+|(% style="background-color:#4f81bd; color:white; width:154px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:175px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:456px" %)**Response**
	184	+|(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
199	199	Device reset to factory default parameters and show booting info
200	200
201	201	LSN50 Device/LoRa ST Module
...	...	@@ -226,12 +226,11 @@
226	226	Feature: Show firmware version. No downlink command yet.
227	227
228	228
229		-(% style="color:blue" %)**AT Command: AT+VER**
	215	+(% style="color:blue" %)**AT Command: AT+VER  ~/~/   **(%%)Image Version and Frequency Band
230	230
231		-(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
232		-|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
233		-|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
234		-|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
	217	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:542px" %)
	218	+|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:86px" %)**Response**
	219	+|(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
235	235	1.3 EU868
236	236
237	237	OK
...	...	@@ -250,8 +250,7 @@
250	250	(((
251	251
252	252
253		-
254		-**xx: Software Type:**
	238	+(% style="color:#037691" %)**xx: Software Type:**
255	255	)))
256	256
257	257	* 0x00 01: LGT92 Version
...	...	@@ -261,7 +261,7 @@
261	261	(((
262	262
263	263
264		-**yy: Frequency Band:**
	248	+(% style="color:#037691" %)**yy: Frequency Band:**
265	265	)))
266	266
267	267	* 0x01: EU868
...	...	@@ -278,7 +278,7 @@
278	278	(((
279	279
280	280
281		-**zz: Subband**
	265	+(% style="color:#037691" %)**zz: Subband**
282	282	)))
283	283
284	284	firmware version: v1.1.0 ~-~-> 110
...	...	@@ -290,30 +290,23 @@
290	290	Feature: Show All configure. No downlink command yet.
291	291
292	292
293		-(% style="color:blue" %)**AT Command: AT+CFG**
	277	+(% style="color:blue" %)**AT Command: AT+CFG  ~/~/ **(%%)Print all configurations
294	294
295		-(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
296		-|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
297		-|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
	279	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:599.222px" %)
	280	+|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:154px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:280px" %)**Response**
298	298	|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
299	299	AT+DEUI = XX XX XX XX XX XX XX XX
300		-
301	301	AT+DADDR=XXXXXXXX
302		-
303	303	……….
304		-
305	305	AT+RX2WTO=X
306		-
307	307	AT+CHS=868100000
308		-
309	309	OK
310	310	)))
311	311
	290	+(% style="display:none" %) (%%)
312	312
313		-
314	314	= 5. Keys, IDs and EUIs management =
315	315
316		-
317	317	== 5.1 Application EUI ==
318	318
319	319
...	...	@@ -322,16 +322,15 @@
322	322
323	323	(% style="color:blue" %)**AT Command: AT+APPEUI**
324	324
325		-(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
326		-|=(% colspan="3" style="width: 683px;" %)AT+APPEUI
327		-|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
328		-|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
	302	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:643px" %)
	303	+|(% style="background-color:#4f81bd; color:white; width:272px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:182px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:184px" %)**Response**
	304	+|(% style="width:272px" %)AT+APPEUI=?|(% style="width:182px" %)Get the Application EUI|(% style="width:184px" %)00 b3 d5 00 00 00 00 00(((
329	329	OK
330	330	)))
331		-|(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
	307	+|(% style="width:272px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:182px" %)Set the Application EUI|(% style="width:184px" %)OK
332	332
	309	+(% style="display:none" %) (%%)
333	333
334		-
335	335	== 5.2 Application Key ==
336	336
337	337
...	...	@@ -340,16 +340,15 @@
340	340
341	341	(% style="color:blue" %)**AT Command: AT+APPKEY**
342	342
343		-(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
344		-|=(% colspan="3" style="width: 973px;" %)AT+APPKEY
345		-|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
	319	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:976.222px" %)
	320	+|(% style="background-color:#4f81bd; color:white; width:441px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:180px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:350px" %)**Response**
346	346	|(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
347	347	OK
348	348	)))
349	349	|(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
350	350
	326	+(% style="display:none" %) (%%)
351	351
352		-
353	353	== 5.3 Application Session Key ==
354	354
355	355
...	...	@@ -358,9 +358,8 @@
358	358
359	359	(% style="color:blue" %)**AT Command: AT+APPSKEY**
360	360
361		-(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
362		-|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
363		-|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
	336	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1040.22px" %)
	337	+|(% style="background-color:#4f81bd; color:white; width:451px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:231px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:354px" %)**Response**
364	364	|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
365	365	OK
366	366	)))
...	...	@@ -368,8 +368,8 @@
368	368	OK
369	369	)))
370	370
	345	+(% style="display:none" %) (%%)
371	371
372		-
373	373	== 5.4 Device Address ==
374	374
375	375
...	...	@@ -378,9 +378,8 @@
378	378
379	379	(% style="color:blue" %)**AT Command: AT+DADDR**
380	380
381		-(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
382		-|=(% colspan="3" style="width: 792px;" %)AT+DADDR
383		-|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
	355	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:795.222px" %)
	356	+|(% style="background-color:#4f81bd; color:white; width:192px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:241px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:359px" %)**Response**
384	384	|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
385	385	A8 40 41 FF
386	386
...	...	@@ -388,8 +388,8 @@
388	388	)))
389	389	|(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
390	390
	364	+(% style="display:none" %) (%%)
391	391
392		-
393	393	== 5.5 Device EUI ==
394	394
395	395
...	...	@@ -398,9 +398,8 @@
398	398
399	399	(% style="color:blue" %)**AT Command: AT+DEUI**
400	400
401		-(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
402		-|=(% colspan="3" style="width: 1032px;" %)AT+DEUI
403		-|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
	374	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1035.22px" %)
	375	+|(% style="background-color:#4f81bd; color:white; width:250px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:634px" %)**Response**
404	404	|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
405	405	OK
406	406	)))
...	...	@@ -408,8 +408,8 @@
408	408	OK
409	409	)))
410	410
	383	+(% style="display:none" %) (%%)
411	411
412		-
413	413	== 5.6 Network ID ==
414	414
415	415
...	...	@@ -418,16 +418,15 @@
418	418
419	419	(% style="color:blue" %)**AT Command: AT+NWKID**
420	420
421		-(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
422		-|=(% colspan="3" style="width: 445px;" %)AT+NWKID
423		-|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
	393	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:448.222px" %)
	394	+|(% style="background-color:#4f81bd; color:white; width:191px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:153px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
424	424	|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
425	425	OK
426	426	)))
427	427	|(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
428	428
	400	+(% style="display:none" %) (%%)
429	429
430		-
431	431	== 5.7 Network Session Key ==
432	432
433	433
...	...	@@ -436,22 +436,19 @@
436	436
437	437	(% style="color:blue" %)**AT Command: AT+NWKSKEY**
438	438
439		-(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
440		-|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
441		-|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
	410	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1017.22px" %)
	411	+|(% style="background-color:#4f81bd; color:white; width:455px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:215px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:343px" %)**Response**
442	442	|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
443	443	OK
444	444	)))
445	445	|(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
446	446
	417	+(% style="display:none" %) (%%)
447	447
448		-
449	449	= 6. Joining and sending date on LoRaWAN network =
450	450
451		-
452	452	== 6.1 Confirm Mode ==
453	453
454		-
455	455	=== 6.1.1  AT+CFM command before DR-LWS007 software stack ===
456	456
457	457
...	...	@@ -460,9 +460,8 @@
460	460
461	461	(% style="color:blue" %)**AT Command: AT+CFM**
462	462
463		-(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464		-|=(% colspan="3" style="width: 707px;" %)AT+CFM
465		-|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
	431	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:710.222px" %)
	432	+|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:205px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:346px" %)**Response**
466	466	|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
467	467	OK
468	468	)))
...	...	@@ -475,25 +475,24 @@
475	475
476	476	If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
477	477
478		-* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
479		-* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
	445	+* **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
480	480
	447	+* **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
481	481
	449	+(% style="display:none" %) (%%)
482	482
483		-
484	484	=== 6.1.2  AT+CFM command since DR-LWS007 software stack ===
485	485
486	486
487	487	(% style="color:blue" %)**AT Command: AT+CFM**
488	488
489		-(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
490		-|=(% colspan="3" style="width: 707px;" %)AT+CFM
491		-|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
	456	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:462px" %)
	457	+|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
492	492	|(% style="width:160px" %)(((
493	493	AT+CFM=1,0,0
494	494
495	495	value1
496		-)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
	462	+)))|(% style="width:198px" %)confirmed uplink|(% style="width:100px" %)(((
497	497	1
498	498
499	499	OK
...	...	@@ -502,7 +502,7 @@
502	502	AT+CFM=0,?,0
503	503
504	504	value2
505		-)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
	471	+)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:100px" %)(((
506	506	0~~7
507	507
508	508	OK
...	...	@@ -511,7 +511,7 @@
511	511	AT+CFM=0,0,1
512	512
513	513	value3
514		-)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
	480	+)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:100px" %)(((
515	515	1
516	516
517	517	OK
...	...	@@ -523,12 +523,12 @@
523	523
524	524	If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
525	525
526		-* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
527		-* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
	492	+* **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
528	528
	494	+* **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
529	529
	496	+(% style="display:none" %) (%%)
530	530
531		-
532	532	== 6.2 Confirm Status ==
533	533
534	534
...	...	@@ -537,15 +537,14 @@
537	537
538	538	(% style="color:blue" %)**AT Command: AT+CFS**
539	539
540		-(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
541		-|=(% colspan="3" style="width: 531px;" %)AT+CFS
542		-|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
543		-|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
	506	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:463px" %)
	507	+|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
	508	+|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
544	544	OK
545	545	)))
546	546
	512	+(% style="display:none" %) (%%)
547	547
548		-
549	549	== 6.3 Join LoRa® Network ==
550	550
551	551
...	...	@@ -554,17 +554,15 @@
554	554
555	555	(% style="color:blue" %)**AT Command: AT+JOIN**
556	556
557		-(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
558		-|=(% colspan="3" style="width: 644px;" %)AT+JOIN
559		-|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
	522	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:647.222px" %)
	523	+|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:334px" %)**Response**
560	560	|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
561	561	OK
562		-
563	563	While Error in format, return AT_BUSY_ERROR
564	564	)))
565	565
	529	+(% style="display:none" %) (%%)
566	566
567		-
568	568	== 6.4 LoRa® Network Join Mode ==
569	569
570	570
...	...	@@ -573,9 +573,8 @@
573	573
574	574	(% style="color:blue" %)**AT Command: AT+NJM**
575	575
576		-(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
577		-|=(% colspan="3" style="width: 750px;" %)AT+NJM
578		-|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
	539	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:753.222px" %)
	540	+|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
579	579	|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
580	580	OK
581	581	)))
...	...	@@ -588,12 +588,12 @@
588	588
589	589	If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
590	590
591		-* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
592		-* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
	553	+* **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
593	593
	555	+* **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
594	594
	557	+(% style="display:none" %) (%%)
595	595
596		-
597	597	== 6.5 LoRa® Network Join Status ==
598	598
599	599
...	...	@@ -602,15 +602,14 @@
602	602
603	603	(% style="color:blue" %)**AT Command: AT+NJS**
604	604
605		-(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
606		-|=(% colspan="3" style="width: 495px;" %)AT+NJS
607		-|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
608		-|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
	567	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:435px" %)
	568	+|(% style="background-color:#4f81bd; color:white; width:169px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:164px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:97px" %)**Response**
	569	+|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:97px" %)0(((
609	609	OK
610	610	)))
611	611
	573	+(% style="display:none" %) (%%)
612	612
613		-
614	614	== 6.6 Print Last Received Data in Raw Format ==
615	615
616	616
...	...	@@ -619,15 +619,14 @@
619	619
620	620	(% style="color:blue" %)**AT Command: AT+RECV**
621	621
622		-(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
623		-|=(% colspan="3" style="width: 584px;" %)AT+RECV
624		-|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
625		-|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
	583	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:543px" %)
	584	+|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
	585	+|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:104px" %)0:(((
626	626	OK
627	627	)))
628	628
	589	+(% style="display:none" %) (%%)
629	629
630		-
631	631	== 6.7 Print Last Received Data in Binary Format ==
632	632
633	633
...	...	@@ -636,15 +636,14 @@
636	636
637	637	(% style="color:blue" %)**AT Command: AT+RECVB**
638	638
639		-(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
640		-|=(% colspan="3" style="width: 790px;" %)AT+RECVB
641		-|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
	599	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:793.222px" %)
	600	+|(% style="background-color:#4f81bd; color:white; width:173px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:497px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:120px" %)**Response**
642	642	|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
643	643	OK
644	644	)))
645	645
	605	+(% style="display:none" %) (%%)
646	646
647		-
648	648	== 6.8 Send Text Data ==
649	649
650	650
...	...	@@ -653,19 +653,15 @@
653	653
654	654	(% style="color:blue" %)**AT Command: AT+SEND**
655	655
656		-(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
657		-|=(% colspan="3" style="width: 988px;" %)AT+SEND
658		-|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
	615	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:991.222px" %)
	616	+|(% style="background-color:#4f81bd; color:white; width:201px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:340px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:446px" %)**Response**
659	659	|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
660	660	While Error in format, return
661		-
662	662	AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
663		-
664		-
665	665	)))
666	666
	622	+(% style="display:none" %) (%%)
667	667
668		-
669	669	== 6.9 Send Hexadecimal Data ==
670	670
671	671
...	...	@@ -674,21 +674,17 @@
674	674
675	675	(% style="color:blue" %)**AT Command: AT+SENDB**
676	676
677		-(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
678		-|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
679		-|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
680		-|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
681		-|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
682		-AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
683		-
684		-
	632	+(% border="1" cellspacing="4" style="width:974px" %)
	633	+|(% style="background-color:#4f81bd; color:white; width:257px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:394px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:318px" %)**Response**
	634	+|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)OK
	635	+|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)While Error in format, return(((
	636	+AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
685	685	)))
686	686
	639	+(% style="display:none" %) (%%)
687	687
688		-
689	689	= 7. LoRaWAN network management =
690	690
691		-
692	692	== 7.1 Adaptive Data Rate ==
693	693
694	694
...	...	@@ -697,28 +697,26 @@
697	697
698	698	(% style="color:blue" %)**AT Command: AT+ADR**
699	699
700		-(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
701		-|=(% colspan="3" style="width: 680px;" %)AT+ADR
702		-|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
703		-|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
	651	+(% border="1" cellspacing="4" style="width:643px" %)
	652	+|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:266px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:209px" %)**Response**
	653	+|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:209px" %)1(((
704	704	OK
705	705	)))
706		-|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK
707		-|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((
	656	+|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)OK
	657	+|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)While Error in format, return(((
708	708	AT_PARAM_ERROR
709	709	)))
710	710
711		-
712	712	(% style="color:blue" %)**Downlink Command: 0x22**
713	713
714	714	If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
715	715
716		-* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
717		-* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
	665	+* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
718	718
	667	+* **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
719	719
	669	+(% style="display:none" %) (%%)
720	720
721		-
722	722	== 7.2 LoRa® Class ==
723	723
724	724
...	...	@@ -725,31 +725,34 @@
725	725	Feature: Get or Set the Device Class(Currently only support class A, class C).
726	726
727	727
728		-(% style="color:blue" %)**AT Command:AT+CLASS**
	677	+(% style="color:blue" %)**AT Command:  AT+CLASS**
729	729
730		-(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
731		-|=(% colspan="3" style="width: 504px;" %)AT+CLASS
732		-|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
733		-|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
	679	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:428px" %)
	680	+|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:166px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:94px" %)**Response**
	681	+|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:94px" %)A(((
734	734	OK
735	735	)))
736		-|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((
	684	+|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:94px" %)OK(((
737	737
738	738	)))
739	739
	688	+(% style="display:none" %)
740	740
	690	+(% style="color:red" %)**Notice:**
741	741
	692	+* Run AT+FDR before running AT+CLASS=C
	693	+* After change to Class=C, Before OTAA Join Successfule, the end node will still shows to use CLASS=A for OTAA Joined. It will use CLASS=C after OTAA Join Succeccful.
	694	+
742	742	== 7.3 Duty Cycle Setting ==
743	743
744	744
745		-Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
	698	+Feature: Get or Set the ETSI Duty Cycle setting** : 0**=disable, **1**=enable - Only for testing.
746	746
747	747
748		-(% style="color:blue" %)**AT Command:AT+DCS**
	701	+(% style="color:blue" %)**AT Command:  AT+DCS**
749	749
750		-(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
751		-|=(% colspan="3" style="width: 512px;" %)AT+DCS
752		-|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
	703	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515.222px" %)
	704	+|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
753	753	|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
754	754	OK
755	755	)))
...	...	@@ -757,37 +757,41 @@
757	757
758	758	)))
759	759
	712	+(% style="display:none" %) (%%)
760	760
761		-
762	762	== 7.4 Data Rate ==
763	763
764	764
765		-Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
	717	+Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
766	766
	719	+(% style="color:red" %)
	720	+**Notice:**
767	767
	722	+* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
	723	+
	724	+* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
	725	+
768	768	(% style="color:blue" %)**AT Command: AT+DR**
769	769
770		-(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
771		-|=(% colspan="3" style="width: 463px;" %)AT+DR
772		-|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
773		-|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
	728	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:409px" %)
	729	+|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
	730	+|(% style="width:156px" %)AT+DR=?|(% style="width:147px" %)Get the Data Rate.|(% style="width:100px" %)5(((
774	774	OK
775	775	)))
776		-|(% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((
	733	+|(% style="width:156px" %)AT+DR=2|(% style="width:147px" %)Set the Data Rate.|(% style="width:100px" %)OK(((
777	777
778	778	)))
779	779
780		-
781	781	(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
782	782
783	783	If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
784	784
785		-* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
786		-* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
	741	+* **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
787	787
	743	+* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
788	788
	745	+(% style="display:none" %) (%%)
789	789
790		-
791	791	== 7.5 Frame Counter Downlink ==
792	792
793	793
...	...	@@ -794,11 +794,10 @@
794	794	Feature: Get or Set the Frame Counter Downlink.
795	795
796	796
797		-(% style="color:blue" %)**AT Command:AT+FCD**
	753	+(% style="color:blue" %)**AT Command:  AT+FCD**
798	798
799		-(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
800		-|=(% colspan="3" style="width: 690px;" %)AT+FCD
801		-|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
	755	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:693.222px" %)
	756	+|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:258px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:269px" %)**Response**
802	802	|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
803	803	OK
804	804	)))
...	...	@@ -806,18 +806,17 @@
806	806	OK
807	807	)))
808	808
	764	+(% style="display:none" %) (%%)
809	809
810		-
811	811	== 7.6 Frame Counter Uplink ==
812	812
813	813	Feature: Get or Set the Frame Counter Uplink.
814	814
815	815
816		-(% style="color:blue" %)**AT Command:AT+FCU**
	771	+(% style="color:blue" %)**AT Command:  AT+FCU**
817	817
818		-(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
819		-|=(% colspan="3" style="width: 531px;" %)AT+FCU
820		-|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
	773	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:534.222px" %)
	774	+|(% style="background-color:#4f81bd; color:white; width:177px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
821	821	|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
822	822	OK
823	823	)))
...	...	@@ -825,8 +825,8 @@
825	825
826	826	)))
827	827
	782	+(% style="display:none" %) (%%)
828	828
829		-
830	830	== 7.7 Join Accept Delay1 ==
831	831
832	832
...	...	@@ -833,11 +833,10 @@
833	833	Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
834	834
835	835
836		-(% style="color:blue" %)**AT Command:AT+JN1DL**
	790	+(% style="color:blue" %)**AT Command:  AT+JN1DL**
837	837
838		-(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
839		-|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
840		-|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
	792	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:537.222px" %)
	793	+|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:229px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:140px" %)**Response**
841	841	|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
842	842	OK
843	843	)))
...	...	@@ -845,18 +845,18 @@
845	845
846	846	)))
847	847
	801	+(% style="display:none" %) (%%)
848	848
849		-
850	850	== 7.8 Join Accept Delay2 ==
851	851
	805	+
852	852	Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
853	853
854	854
855		-(% style="color:blue" %)**AT Command:AT+JN2DL**
	809	+(% style="color:blue" %)**AT Command:  AT+JN2DL**
856	856
857		-(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
858		-|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
859		-|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
	811	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:538.222px" %)
	812	+|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:228px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:146px" %)**Response**
860	860	|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
861	861	OK
862	862	)))
...	...	@@ -864,19 +864,20 @@
864	864
865	865	)))
866	866
	820	+(% style="display:none" %) (%%)
	821	+
867	867	== 7.9 Public Network Mode ==
868	868
869	869
870	870	Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
871	871
872		-(% style="color:red" %)Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
	827	+(% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
873	873
874	874
875		-(% style="color:blue" %)**AT Command:AT+PNM**
	830	+(% style="color:blue" %)**AT Command:  AT+PNM**
876	876
877		-(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
878		-|=(% colspan="3" style="width: 664px;" %)AT+PNM
879		-|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
	832	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:667.222px" %)
	833	+|(% style="background-color:#4f81bd; color:white; width:166px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:225px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Response**
880	880	|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
881	881	OK
882	882	)))
...	...	@@ -891,6 +891,8 @@
891	891	)))
892	892	|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
893	893
	848	+(% style="display:none" %) (%%)
	849	+
894	894	== 7.10 Receive Delay1 ==
895	895
896	896
...	...	@@ -897,11 +897,10 @@
897	897	Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
898	898
899	899
900		-(% style="color:blue" %)**AT Command:AT+RX1DL**
	856	+(% style="color:blue" %)**AT Command: AT+RX1DL**
901	901
902		-(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
903		-|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
904		-|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
	858	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:408.222px" %)
	859	+|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:122px" %)**Response**
905	905	|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
906	906	OK
907	907	)))
...	...	@@ -909,6 +909,7 @@
909	909
910	910	)))
911	911
	867	+(% style="display:none" %) (%%)
912	912
913	913	== 7.11 Receive Delay2 ==
914	914
...	...	@@ -916,11 +916,10 @@
916	916	Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
917	917
918	918
919		-(% style="color:blue" %)**AT Command:AT+RX2DL**
	875	+(% style="color:blue" %)**AT Command: AT+RX2DL**
920	920
921		-(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
922		-|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
923		-|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
	877	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:481.222px" %)
	878	+|(% style="background-color:#4f81bd; color:white; width:175px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:152px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:150px" %)**Response**
924	924	|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
925	925	OK
926	926	)))
...	...	@@ -928,6 +928,7 @@
928	928
929	929	)))
930	930
	886	+(% style="display:none" %) (%%)
931	931
932	932	== 7.12 Rx2 Window Data Rate ==
933	933
...	...	@@ -935,11 +935,10 @@
935	935	Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
936	936
937	937
938		-(% style="color:blue" %)**AT Command:AT+RX2DR**
	894	+(% style="color:blue" %)**AT Command:  AT+RX2DR**
939	939
940		-(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
941		-|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
942		-|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
	896	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:525.222px" %)
	897	+|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:232px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:130px" %)**Response**
943	943	|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
944	944	OK
945	945	)))
...	...	@@ -947,6 +947,7 @@
947	947
948	948	)))
949	949
	905	+(% style="display:none" %) (%%)
950	950
951	951	== 7.13 Rx2 Window Frequency ==
952	952
...	...	@@ -954,11 +954,10 @@
954	954	Feature: Get or Set the Rx2 window frequency
955	955
956	956
957		-(% style="color:blue" %)**AT Command:AT+RX2FQ**
	913	+(% style="color:blue" %)**AT Command:  AT+RX2FQ**
958	958
959		-(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
960		-|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
961		-|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
	915	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:587.222px" %)
	916	+|(% style="background-color:#4f81bd; color:white; width:183px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:240px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:160px" %)**Response**
962	962	|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
963	963	OK
964	964	)))
...	...	@@ -966,6 +966,7 @@
966	966
967	967	)))
968	968
	924	+(% style="display:none" %) (%%)
969	969
970	970	== 7.14 Transmit Power ==
971	971
...	...	@@ -972,12 +972,13 @@
972	972
973	973	Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
974	974
	931	+(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
975	975
976		-(% style="color:blue" %)**AT Command:AT+TXP**
977	977
978		-(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
979		-|=(% colspan="3" style="width: 462px;" %)AT+TXP
980		-|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
	934	+(% style="color:blue" %)**AT Command:  AT+TXP**
	935	+
	936	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:465.222px" %)
	937	+|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:189px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:112px" %)**Response**
981	981	|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
982	982	OK
983	983	)))
...	...	@@ -989,10 +989,11 @@
989	989
990	990	If the downlink payload=22000100, it means setting the TXP to 0.
991	991
992		-* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
993		-* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
	949	+* **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
994	994
	951	+* **Example 2**: Downlink Payload: **22000000**  ~/~/ Set AT+TXP=0.
995	995
	953	+(% style="display:none" %) (%%)
996	996
997	997	== 7.15 RSSI of the Last Received Packet ==
998	998
...	...	@@ -1002,13 +1002,13 @@
1002	1002
1003	1003	(% style="color:blue" %)**AT Command:AT+RSSI**
1004	1004
1005		-(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
1006		-|=(% colspan="3" style="width: 554px;" %)AT+RSSI
1007		-|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
	963	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:557.222px" %)
	964	+|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:289px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
1008	1008	|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
1009	1009	OK
1010	1010	)))
1011	1011
	969	+(% style="display:none" %) (%%)
1012	1012
1013	1013	== 7.16 SNR of the Last Received Packet ==
1014	1014
...	...	@@ -1016,15 +1016,15 @@
1016	1016	Feature: Get the SNR of the last received packet
1017	1017
1018	1018
1019		-(% style="color:blue" %)**AT Command:AT+SNR**
	977	+(% style="color:blue" %)**AT Command:  AT+SNR**
1020	1020
1021		-(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
1022		-|=(% colspan="3" style="width: 568px;" %)AT+SNR
1023		-|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
	979	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:571.222px" %)
	980	+|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:290px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
1024	1024	|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
1025	1025	OK
1026	1026	)))
1027	1027
	985	+(% style="display:none" %) (%%)
1028	1028
1029	1029	== 7.17 Application Port ==
1030	1030
...	...	@@ -1034,13 +1034,12 @@
1034	1034
1035	1035	(% style="color:blue" %)**AT Command: AT+PORT**
1036	1036
1037		-(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
1038		-|=(% colspan="3" style="width: 497px;" %)AT+PORT
1039		-|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
1040		-|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
	995	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:459px" %)
	996	+|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
	997	+|(% style="width:157px" %)AT+PORT=?|(% style="width:193px" %)Get the application port|(% style="width:104px" %)21(((
1041	1041	OK
1042	1042	)))
1043		-|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
	1000	+|(% style="width:157px" %)AT+PORT=21|(% style="width:193px" %)Set the application port|(% style="width:104px" %)OK
1044	1044
1045	1045	(% style="color:blue" %)**Downlink Command: 0x23**
1046	1046
...	...	@@ -1048,10 +1048,11 @@
1048	1048
1049	1049	If the downlink payload=2301, it means set the application port to 1, while type code is 23.
1050	1050
1051		-* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
1052		-* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
	1008	+* **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1053	1053
	1010	+* **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1054	1054
	1012	+(% style="display:none" %) (%%)
1055	1055
1056	1056	== 7.18 Single Channel Mode ==
1057	1057
...	...	@@ -1061,25 +1061,25 @@
1061	1061
1062	1062	(% style="color:blue" %)**AT Command: AT+CHS**
1063	1063
1064		-(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
1065		-|=(% colspan="3" style="width: 600px;" %)AT+CHS
1066		-|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
1067		-|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
	1022	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:584px" %)
	1023	+|(% style="background-color:#4f81bd; color:white; width:182px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
	1024	+|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:101px" %)0(((
1068	1068	OK
1069	1069	)))
1070		-|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
	1027	+|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:101px" %)OK
1071	1071
	1029	+(% style="display:none" %) (%%)
1072	1072
1073	1073	== 7.19 Eight Channel Mode ==
1074	1074
	1033	+
1075	1075	Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1076	1076
1077	1077
1078	1078	(% style="color:blue" %)**AT Command: AT+CHE**
1079	1079
1080		-(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1081		-|=(% colspan="3" style="width: 707px;" %)AT+CHE
1082		-|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
	1039	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:710.222px" %)
	1040	+|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
1083	1083	|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
1084	1084	902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
1085	1085
...	...	@@ -1087,16 +1087,17 @@
1087	1087	)))
1088	1088	|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1089	1089
1090		-(% style="color:blue" %)**Downlink Command: 0x24**
	1048	+(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
1091	1091
1092	1092	Format: Command Code (0x24) followed by 1 bytes channel value.
1093	1093
1094	1094	If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1095	1095
1096		-* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1097		-* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
	1054	+* **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1098	1098
	1056	+* **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1099	1099
	1058	+(% style="display:none" %) (%%)
1100	1100
1101	1101	== 7.20 Get or Set RXwindows1 timeout ==
1102	1102
...	...	@@ -1106,31 +1106,26 @@
1106	1106
1107	1107	(% style="color:blue" %)**AT Command: AT+RX1WTO**
1108	1108
1109		-(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1110		-|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1111		-|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
	1068	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:460.222px" %)
	1069	+|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:201px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:93px" %)**Response**
1112	1112	|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
1113	1113	OK
1114	1114	)))
1115	1115	|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1116	1116
1117		-(((
1118		-
	1075	+(% style="display:none" %) (%%)
1119	1119
1120		-**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1121		-
1122		-
	1077	+(((
	1078	+(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1123	1123	)))
1124	1124
1125	1125	[[image:image-20220526162535-1.png]]
1126	1126
1127		-
1128	1128	(((
1129	1129	Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1130		-
1131		-
1132	1132	)))
1133	1133
	1087	+
1134	1134	== 7.21 Get or Set RXwindows2 timeout ==
1135	1135
1136	1136
...	...	@@ -1139,14 +1139,14 @@
1139	1139
1140	1140	(% style="color:blue" %)**AT Command: AT+RX2WTO**
1141	1141
1142		-(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1143		-|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1144		-|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1145		-|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
	1096	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:448px" %)
	1097	+|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:192px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:90px" %)**Response**
	1098	+|(% style="width:162px" %)AT+RX2WTO=?|(% style="width:192px" %)Get RXwindows2 timeout|(% style="width:90px" %)7(((
1146	1146	OK
1147	1147	)))
1148		-|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
	1101	+|(% style="width:162px" %)AT+RX2WTO=20|(% style="width:192px" %)Set RXwindows2 timeout|(% style="width:90px" %)OK
1149	1149
	1103	+(% style="display:none" %) (%%)
1150	1150
1151	1151	== 7.22 Setting up uplinkdwelltime (as923, au915) ==
1152	1152
...	...	@@ -1156,13 +1156,12 @@
1156	1156
1157	1157	(% style="color:blue" %)**AT Command: AT+DWELLT**
1158	1158
1159		-(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1160		-|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1161		-|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1162		-|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
	1113	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:419px" %)
	1114	+|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:157px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:95px" %)**Response**
	1115	+|(% style="width:162px" %)AT+DWELLT=?|(% style="width:157px" %)Get uplinkdwelltime|(% style="width:95px" %)1(((
1163	1163	OK
1164	1164	)))
1165		-|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
	1118	+|(% style="width:162px" %)AT+DWELLT=0|(% style="width:157px" %)Set uplinkdwelltime|(% style="width:95px" %)OK
1166	1166
1167	1167	(% style="color:blue" %)**Downlink Command: 0x25**
1168	1168
...	...	@@ -1170,10 +1170,11 @@
1170	1170
1171	1171	If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1172	1172
1173		-* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1174		-* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
	1126	+* **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1175	1175
	1128	+* **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1176	1176
	1130	+(% style="display:none" %) (%%)
1177	1177
1178	1178	== 7.23 Set Packet Receiving Response Level ==
1179	1179
...	...	@@ -1181,27 +1181,30 @@
1181	1181	Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1182	1182
1183	1183
1184		-RPL value:
	1138	+(% style="color:blue" %)**RPL value:**
1185	1185
1186	1186	* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
	1141	+
1187	1187	* **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
	1143	+
1188	1188	* **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
	1145	+
1189	1189	* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
	1147	+
1190	1190	* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1191	1191
	1150	+(% style="color:blue" %)**Case Analyes:**
1192	1192
1193		-Case Analyes:
1194		-
1195	1195	* For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
	1153	+
1196	1196	* For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
	1155	+
1197	1197	* For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1198	1198
1199		-
1200	1200	(% style="color:blue" %)**AT Command: AT+RPL**
1201	1201
1202		-(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1203		-|=(% colspan="3" style="width: 533px;" %)AT+RPL
1204		-|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
	1160	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:536.222px" %)
	1161	+|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:263px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:109px" %)**Response**
1205	1205	|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
1206	1206	OK
1207	1207	)))
...	...	@@ -1213,10 +1213,11 @@
1213	1213
1214	1214	If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1215	1215
1216		-* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1217		-* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
	1173	+* **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1218	1218
	1175	+* **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1219	1219
	1177	+(% style="display:none" %) (%%)
1220	1220
1221	1221	== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1222	1222
...	...	@@ -1223,13 +1223,16 @@
1223	1223
1224	1224	(% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1225	1225
1226		-(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1227		-|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1228		-|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1229		-|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
	1184	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:589px" %)
	1185	+|(% style="background-color:#4f81bd; color:white; width:227px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:300px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:87px" %)**Response**
	1186	+|(% style="width:227px" %)AT+SETMAXNBTRANS=1，0|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1230	1230	OK
1231	1231	)))
1232		-|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
	1189	+|(% style="width:227px" %)AT+SETMAXNBTRANS=？，1|(% style="width:300px" %)(((
	1190	+value2: 0: uplink fcnt doesn't change for each NBTrans;
	1191	+
	1192	+1: uplink fcnt increase by 1 for each NBTrans.
	1193	+)))|(% style="width:87px" %)(((
1233	1233	1
1234	1234
1235	1235	OK
...	...	@@ -1241,10 +1241,11 @@
1241	1241
1242	1242	If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1243	1243
1244		-* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1245		-* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
	1205	+* Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1246	1246
	1207	+* Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1247	1247
	1209	+(% style="display:none" %) (%%)
1248	1248
1249	1249	== 7.25 Device offline rejoining （LWS007) ==
1250	1250
...	...	@@ -1251,14 +1251,18 @@
1251	1251
1252	1252	(% style="color:blue" %)**AT Command: AT+DDETECT**
1253	1253
1254		-(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1255		-|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1256		-|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
	1216	+AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
	1217	+
	1218	+* ACK_Timout_1: Unit: min
	1219	+* ACK_Timout_2: Unit: min
	1220	+
	1221	+(% border="1" style="background-color:#f2f2f2; width:562px" %)
	1222	+|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
1257	1257	|(% style="width:160px" %)(((
1258	1258	AT+DDETECT=1,1440,2880
1259	1259
1260	1260	value1
1261		-)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
	1227	+)))|(% style="width:272px" %)Enable online detect|(% style="width:89px" %)(((
1262	1262	1
1263	1263
1264	1264	OK
...	...	@@ -1267,7 +1267,7 @@
1267	1267	AT+DDETECT=1,?,2880
1268	1268
1269	1269	value2
1270		-)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
	1236	+)))|(% style="width:272px" %)Online detection packet sending time|(% style="width:89px" %)(((
1271	1271
1272	1272
1273	1273	OK
...	...	@@ -1276,21 +1276,27 @@
1276	1276	AT+DDETECT=1,1440,？
1277	1277
1278	1278	value3
1279		-)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
	1245	+)))|(% style="width:272px" %)Process rejoin|(% style="width:89px" %)(((
1280	1280
1281	1281
1282	1282	OK
1283	1283	)))
1284	1284
1285		-(% style="color:blue" %)**Downlink Command: 0x33**
	1251	+(% style="color:blue" %)**Downlink Command: 0x32**
1286	1286
1287	1287	Format: Command Code (0x32) followed by 2 bytes mode value.
1288	1288
1289		-If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
	1255	+If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1290	1290
1291		-* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
	1257	+* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1292	1292
	1259	+*
	1260	+** 0x01 : Flag
	1261	+** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
	1262	+** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
	1263	+** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1293	1293
	1265	+(% style="display:none" %) (%%)
1294	1294
1295	1295	== 7.26 Request the server to send an ACK ==
1296	1296
...	...	@@ -1297,18 +1297,17 @@
1297	1297
1298	1298	(% style="color:blue" %)**AT Command: AT+PNACKMD**
1299	1299
1300		-(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1301		-|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1302		-|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1303		-|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
	1272	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:889px" %)
	1273	+|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:627px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
	1274	+|(% style="width:160px" %)AT+PNACKMD=1|(% style="width:627px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:100px" %)1(((
1304	1304	OK
1305	1305	)))
1306		-|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
	1277	+|(% style="width:160px" %)AT+PNACKMD=0|(% style="width:627px" %)off request the server to send an ACK|(% style="width:100px" %)(((
1307	1307	0
1308		-
1309	1309	OK
1310	1310	)))
1311	1311
	1282	+(% style="display:none" %) (%%)
1312	1312
1313	1313	== 7.27 Adjust network rejoining interval ==
1314	1314
...	...	@@ -1315,16 +1315,15 @@
1315	1315
1316	1316	(% style="color:blue" %)**AT Command: AT+RJTDC**
1317	1317
1318		-(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1319		-|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1320		-|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1321		-|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
	1289	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:889px" %)
	1290	+|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:357px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
	1291	+|(% style="width:165px" %)AT+RJTDC=?|(% style="width:357px" %)Show the ReJoin data transmission interval in min|(% style="width:361px" %)30(((
1322	1322	OK
1323	1323
1324		-the interval is 30000ms = 30s
	1294	+the interval is 30 min
1325	1325	)))
1326		-|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1327		-Set the ReJoin data transmission interval to 60000ms = 60 seconds
	1296	+|(% style="width:165px" %)AT+RJTDC=60|(% style="width:357px" %)Set the ReJoin data transmission interval in min|(% style="width:361px" %)OK(((
	1297	+Set the ReJoin data transmission interval to 60 min
1328	1328	)))
1329	1329
1330	1330	(% style="color:blue" %)**Downlink Command: 0x26**
...	...	@@ -1333,21 +1333,22 @@
1333	1333
1334	1334	If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1335	1335
1336		-* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1337		-* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
	1306	+* **Example 1:** Downlink Payload: 26000A  ~/~/  Set AT+RJTDC=10
1338	1338
	1308	+* **Example 2: **Downlink Payload: 260002  ~/~/  Set AT+RJTDC=2
1339	1339
	1310	+(% style="display:none" %) (%%)
1340	1340
1341	1341	= 8. AT Commands Combination =
1342	1342
1343		-
1344	1344	== 8.1 Set a fix RX2DR for downlink window ==
1345	1345
1346	1346
1347		-* **AT+ADR=0             ** **~-~->**  Disable ADR first
1348		-* **AT+RX2DR=xxxx**  **~-~->**  Set xxxx to your wanted DataRate
	1317	+* (% style="color:blue" %)**AT+ADR=0             **(%%) **~/~/**  Disable ADR first
1349	1349
	1319	+* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~/~/**  Set xxxx to your wanted DataRate
1350	1350
	1321	+(% style="display:none" %) (%%)
1351	1351
1352	1352	== 8.2 Use Downlink Command to set a fix uplink DR ==
1353	1353
...	...	@@ -1356,6 +1356,10 @@
1356	1356
1357	1357	**Same as:**
1358	1358
1359		-* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1360		-* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1361		-* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
	1330	+* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
	1331	+
	1332	+* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
	1333	+
	1334	+* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
	1335	+
	1336	+