Last modified by kai on 2024/09/06 10:00
<
From version < 51.17 >
edited by Xiaoling
on 2022/07/13 14:14
To version < 63.39 >
edited by Xiaoling
on 2023/05/29 14:36
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -9,41 +9,36 @@
9 9  
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 -* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
13 -* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
12 +* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 +* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 15  (((
16 16  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17 -
18 18  )))
19 19  
19 +
20 20  = 2. How to use AT Commands or Downlink command =
21 21  
22 22  
23 -* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 -* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 +* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 +* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
25 25  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
27 27  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
28 28  
29 +(% style="display:none" %) (%%)
29 29  
30 -
31 -
32 32  = 3. Support End Node and firmware version =
33 33  
34 34  
35 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
36 -|=(% colspan="3" style="width: 963px;" %)(((
37 37  Dragino STM32 base hardware Firmware / LoRaWAN stack list
38 -)))
35 +
36 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:966px" %)
37 +|(% style="background-color:#4f81bd; color:white; width:187px" %)(((
38 +**Model**)))|(% style="background-color:#4f81bd; color:white; width:330px" %)(((
39 +**Description**)))|(% style="background-color:#4f81bd; color:white; width:445px" %)(((
40 +**Firmware Version <~-~-> Stack Version**)))
39 39  |(% style="width:187px" %)(((
40 -**Model**
41 -)))|(% style="width:330px" %)(((
42 -**Description**
43 -)))|(% style="width:445px" %)(((
44 -**Firmware Version <~-~-> Stack Version**
45 -)))
46 -|(% style="width:187px" %)(((
47 47  [[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
48 48  )))|(% style="width:330px" %)(((
49 49  Open Source Generic LoRaWAN Sensor Node
... ... @@ -103,12 +103,10 @@
103 103  )))
104 104  )))
105 105  
101 +(% style="display:none" %) (%%)
106 106  
107 -
108 -
109 109  = 4. System Management Commands =
110 110  
111 -
112 112  == 4.1 Change Uplink Interval ==
113 113  
114 114  
... ... @@ -117,9 +117,8 @@
117 117  
118 118  (% style="color:blue" %)**AT Command: AT+TDC**
119 119  
120 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
121 -|=(% colspan="3" style="width: 724px;" %)AT+TDC
122 -|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
113 +(% border="1" style="background-color:#f2f2f2; width:727.222px" %)
114 +|(% style="background-color:#4F81BD;color:white; width:165px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:227px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:329px" %)**Response**
123 123  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
124 124  OK
125 125  
... ... @@ -138,15 +138,14 @@
138 138  )))
139 139  
140 140  (((
141 -If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
133 +If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
142 142  )))
143 143  
144 -* **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
145 -* **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
136 +* **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
137 +* **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
146 146  
139 +(% style="display:none" %) (%%)
147 147  
148 -
149 -
150 150  == 4.2 Reboot End Node ==
151 151  
152 152  
... ... @@ -155,10 +155,10 @@
155 155  
156 156  (% style="color:blue" %)**AT Command: ATZ**
157 157  
158 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
159 -|=(% colspan="3" %)ATZ: Trig a reset of the MCU
160 -|**Command Example**|**Function**|**Response**
161 -|ATZ|Reset MCU|(((
149 +(% border="1" style="background-color:#f2f2f2; width:546px" %)
150 +|=(% colspan="3" style="width: 543px;background-color:#D9E2F3;color:#0070C0" %)ATZ: Trig a reset of the MCU
151 +|(% style="background-color:#4F81BD;color:white; width:157px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:92px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:294px" %)**Response**
152 +|(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
162 162  Device reset and show booting info
163 163  
164 164  LSN50 Device/LoRa ST Module
... ... @@ -179,11 +179,10 @@
179 179  )))
180 180  
181 181  (((
182 -If the downlink payload=**04FF**, the end node will reboot.
183 -
184 -
173 +If the downlink payload=**04FF**, the end node will reboot.
185 185  )))
186 186  
176 +
187 187  == 4.3 Reset to factory Default ==
188 188  
189 189  
... ... @@ -192,10 +192,10 @@
192 192  
193 193  (% style="color:blue" %)**AT Command: AT+FDR**
194 194  
195 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
196 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default
197 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
198 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
185 +(% border="1" style="background-color:#f2f2f2; width:789px" %)
186 +|=(% colspan="3" style="width: 786px;background-color:#D9E2F3;color:#0070C0" %)Reset to factory default
187 +|(% style="background-color:#4F81BD;color:white; width:154px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:175px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:456px" %)**Response**
188 +|(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
199 199  Device reset to factory default parameters and show booting info
200 200  
201 201  LSN50 Device/LoRa ST Module
... ... @@ -228,10 +228,10 @@
228 228  
229 229  (% style="color:blue" %)**AT Command: AT+VER**
230 230  
231 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
232 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
233 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
234 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
221 +(% border="1" style="background-color:#f2f2f2; width:542px" %)
222 +|=(% colspan="3" style="width: 539px;background-color:#D9E2F3;color:#0070C0" %)AT+VER: Image Version and Frequency Band
223 +|(% style="background-color:#4F81BD;color:white; width:157px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:295px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:86px" %)**Response**
224 +|(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
235 235  1.3 EU868
236 236  
237 237  OK
... ... @@ -250,7 +250,6 @@
250 250  (((
251 251  
252 252  
253 -
254 254  **xx: Software Type:**
255 255  )))
256 256  
... ... @@ -292,28 +292,22 @@
292 292  
293 293  (% style="color:blue" %)**AT Command: AT+CFG**
294 294  
295 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
296 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
297 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
284 +(% border="1" style="background-color:#f2f2f2; width:599.222px" %)
285 +|=(% colspan="3" style="width: 596px;background-color:#D9E2F3;color:#0070C0" %)AT+CFG: Print all configurations
286 +|(% style="background-color:#4F81BD;color:white; width:160px" %)**Command Example**|(% style="background-color:#4F81BD;color:white0; width:154px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:280px" %)**Response**
298 298  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
299 299  AT+DEUI = XX XX XX XX XX XX XX XX
300 -
301 301  AT+DADDR=XXXXXXXX
302 -
303 303  ……….
304 -
305 305  AT+RX2WTO=X
306 -
307 307  AT+CHS=868100000
308 -
309 309  OK
310 310  )))
311 311  
296 +(% style="display:none" %) (%%)
312 312  
313 -
314 314  = 5. Keys, IDs and EUIs management =
315 315  
316 -
317 317  == 5.1 Application EUI ==
318 318  
319 319  
... ... @@ -322,16 +322,16 @@
322 322  
323 323  (% style="color:blue" %)**AT Command: AT+APPEUI**
324 324  
325 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
326 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI
327 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
308 +(% border="1" style="background-color:#f2f2f2; width:686.222px" %)
309 +|=(% colspan="3" style="width: 683px;background-color:#D9E2F3;color:#0070C0" %)AT+APPEUI
310 +|(% style="background-color:#4F81BD;color:white; width:305px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:186px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:191px" %)**Response**
328 328  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
329 329  OK
330 330  )))
331 331  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
332 332  
316 +(% style="display:none" %) (%%)
333 333  
334 -
335 335  == 5.2 Application Key ==
336 336  
337 337  
... ... @@ -340,16 +340,16 @@
340 340  
341 341  (% style="color:blue" %)**AT Command: AT+APPKEY**
342 342  
343 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
344 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY
345 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
326 +(% border="1" style="background-color:#f2f2f2; width:976.222px" %)
327 +|=(% colspan="3" style="width: 973px;background-color:#D9E2F3;color:#0070C0" %)AT+APPKEY
328 +|(% style="background-color:#4F81BD;color:white; width:441px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:180px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:350px" %)**Response**
346 346  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
347 347  OK
348 348  )))
349 349  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
350 350  
334 +(% style="display:none" %) (%%)
351 351  
352 -
353 353  == 5.3 Application Session Key ==
354 354  
355 355  
... ... @@ -358,9 +358,9 @@
358 358  
359 359  (% style="color:blue" %)**AT Command: AT+APPSKEY**
360 360  
361 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
362 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
363 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
344 +(% border="1" style="background-color:#f2f2f2; width:1040.22px" %)
345 +|=(% colspan="3" style="width: 1037px;background-color:#D9E2F3;color:#0070C0" %)AT+APPSKEY
346 +|(% style="background-color:#4F81BD;color:white; width:451px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:231px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:354px" %)**Response**
364 364  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
365 365  OK
366 366  )))
... ... @@ -368,8 +368,8 @@
368 368  OK
369 369  )))
370 370  
354 +(% style="display:none" %) (%%)
371 371  
372 -
373 373  == 5.4 Device Address ==
374 374  
375 375  
... ... @@ -378,9 +378,9 @@
378 378  
379 379  (% style="color:blue" %)**AT Command: AT+DADDR**
380 380  
381 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
382 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR
383 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
364 +(% border="1" style="background-color:#f2f2f2; width:795.222px" %)
365 +|=(% colspan="3" style="width: 792px;background-color:#D9E2F3;color:#0070C0" %)AT+DADDR
366 +|(% style="background-color:#4F81BD;color:white; width:192px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:241px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:359px" %)**Response**
384 384  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
385 385  A8 40 41 FF
386 386  
... ... @@ -388,8 +388,8 @@
388 388  )))
389 389  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
390 390  
374 +(% style="display:none" %) (%%)
391 391  
392 -
393 393  == 5.5 Device EUI ==
394 394  
395 395  
... ... @@ -398,9 +398,9 @@
398 398  
399 399  (% style="color:blue" %)**AT Command: AT+DEUI**
400 400  
401 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
402 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI
403 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
384 +(% border="1" style="background-color:#f2f2f2; width:1035.22px" %)
385 +|=(% colspan="3" style="width: 1032px;background-color:#D9E2F3;color:#0070C0" %)AT+DEUI
386 +|(% style="background-color:#4F81BD;color:white; width:250px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:147px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:634px" %)**Response**
404 404  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
405 405  OK
406 406  )))
... ... @@ -408,8 +408,8 @@
408 408  OK
409 409  )))
410 410  
394 +(% style="display:none" %) (%%)
411 411  
412 -
413 413  == 5.6 Network ID ==
414 414  
415 415  
... ... @@ -418,16 +418,16 @@
418 418  
419 419  (% style="color:blue" %)**AT Command: AT+NWKID**
420 420  
421 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
422 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID
423 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
404 +(% border="1" style="background-color:#f2f2f2; width:448.222px" %)
405 +|=(% colspan="3" style="width: 445px;background-color:#D9E2F3;color:#0070C0" %)AT+NWKID
406 +|(% style="background-color:#4F81BD;color:white; width:191px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:153px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:101px" %)**Response**
424 424  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
425 425  OK
426 426  )))
427 427  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
428 428  
412 +(% style="display:none" %) (%%)
429 429  
430 -
431 431  == 5.7 Network Session Key ==
432 432  
433 433  
... ... @@ -436,22 +436,20 @@
436 436  
437 437  (% style="color:blue" %)**AT Command: AT+NWKSKEY**
438 438  
439 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
440 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
441 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
422 +(% border="1" style="background-color:#f2f2f2; width:1017.22px" %)
423 +|=(% colspan="3" style="width: 1014px;background-color:#D9E2F3;;color:#0070C0" %)AT+NWKSKEY
424 +|(% style="background-color:#4F81BD;color:white; width:455px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:215px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:343px" %)**Response**
442 442  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
443 443  OK
444 444  )))
445 445  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
446 446  
430 +(% style="display:none" %) (%%)
447 447  
448 -
449 449  = 6. Joining and sending date on LoRaWAN network =
450 450  
451 -
452 452  == 6.1 Confirm Mode ==
453 453  
454 -
455 455  === 6.1.1  AT+CFM command before DR-LWS007 software stack ===
456 456  
457 457  
... ... @@ -460,9 +460,9 @@
460 460  
461 461  (% style="color:blue" %)**AT Command: AT+CFM**
462 462  
463 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
444 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
445 +|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+CFM
446 +|(% style="background-color:#4F81BD;color:white; width:155px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:205px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:346px" %)**Response**
466 466  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
467 467  OK
468 468  )))
... ... @@ -475,20 +475,19 @@
475 475  
476 476  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
477 477  
478 -* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
479 -* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
459 +* **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
460 +* **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
480 480  
462 +(% style="display:none" %) (%%)
481 481  
482 -
483 -
484 484  === 6.1.2  AT+CFM command since DR-LWS007 software stack ===
485 485  
486 486  
487 487  (% style="color:blue" %)**AT Command: AT+CFM**
488 488  
489 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
490 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
491 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
469 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
470 +|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+CFM
471 +|(% style="background-color:#4F81BD;color:white; width:160px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:198px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:349px" %)**Response**
492 492  |(% style="width:160px" %)(((
493 493  AT+CFM=1,0,0
494 494  
... ... @@ -523,12 +523,11 @@
523 523  
524 524  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
525 525  
526 -* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
527 -* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
506 +* **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
507 +* **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
528 528  
509 +(% style="display:none" %) (%%)
529 529  
530 -
531 -
532 532  == 6.2 Confirm Status ==
533 533  
534 534  
... ... @@ -537,15 +537,15 @@
537 537  
538 538  (% style="color:blue" %)**AT Command: AT+CFS**
539 539  
540 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
541 -|=(% colspan="3" style="width: 531px;" %)AT+CFS
542 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
543 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
519 +(% border="1" style="background-color:#f2f2f2; width:463px" %)
520 +|=(% colspan="3" style="width: 460px;background-color:#D9E2F3;color:#0070C0" %)AT+CFS
521 +|(% style="background-color:#4F81BD;color:white; width:156px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:193px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:107px" %)**Response**
522 +|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
544 544  OK
545 545  )))
546 546  
526 +(% style="display:none" %) (%%)
547 547  
548 -
549 549  == 6.3 Join LoRa® Network ==
550 550  
551 551  
... ... @@ -554,17 +554,16 @@
554 554  
555 555  (% style="color:blue" %)**AT Command: AT+JOIN**
556 556  
557 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
558 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN
559 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
536 +(% border="1" style="background-color:#f2f2f2; width:647.222px" %)
537 +|=(% colspan="3" style="width: 644px;background-color:#D9E2F3;color:#0070C0" %)AT+JOIN
538 +|(% style="background-color:#4F81BD;color:white; width:163px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:147px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:334px" %)**Response**
560 560  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
561 561  OK
562 -
563 563  While Error in format, return AT_BUSY_ERROR
564 564  )))
565 565  
544 +(% style="display:none" %) (%%)
566 566  
567 -
568 568  == 6.4 LoRa® Network Join Mode ==
569 569  
570 570  
... ... @@ -573,9 +573,9 @@
573 573  
574 574  (% style="color:blue" %)**AT Command: AT+NJM**
575 575  
576 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
577 -|=(% colspan="3" style="width: 750px;" %)AT+NJM
578 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
554 +(% border="1" style="background-color:#f2f2f2; width:753.222px" %)
555 +|=(% colspan="3" style="width: 750px;background-color:#D9E2F3;color:#0070C0" %)AT+NJM
556 +|(% style="background-color:#4F81BD;color:white; width:162px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:227px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:361px" %)**Response**
579 579  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
580 580  OK
581 581  )))
... ... @@ -588,12 +588,11 @@
588 588  
589 589  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
590 590  
591 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
592 -* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
569 +* **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
570 +* **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
593 593  
572 +(% style="display:none" %) (%%)
594 594  
595 -
596 -
597 597  == 6.5 LoRa® Network Join Status ==
598 598  
599 599  
... ... @@ -602,15 +602,15 @@
602 602  
603 603  (% style="color:blue" %)**AT Command: AT+NJS**
604 604  
605 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
606 -|=(% colspan="3" style="width: 495px;" %)AT+NJS
607 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
582 +(% border="1" style="background-color:#f2f2f2; width:498.222px" %)
583 +|=(% colspan="3" style="width: 495px;background-color:#D9E2F3;color:#0070C0" %)AT+NJS
584 +|(% style="background-color:#4F81BD;color:white; width:169px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:164px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:161px" %)**Response**
608 608  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
609 609  OK
610 610  )))
611 611  
589 +(% style="display:none" %) (%%)
612 612  
613 -
614 614  == 6.6 Print Last Received Data in Raw Format ==
615 615  
616 616  
... ... @@ -619,15 +619,15 @@
619 619  
620 620  (% style="color:blue" %)**AT Command: AT+RECV**
621 621  
622 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
623 -|=(% colspan="3" style="width: 584px;" %)AT+RECV
624 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
599 +(% border="1" style="background-color:#f2f2f2; width:587.222px" %)
600 +|=(% colspan="3" style="width: 584px;background-color:#D9E2F3;color:#0070C0" %)AT+RECV
601 +|(% style="background-color:#4F81BD;color:white; width:161px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:272px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:150px" %)**Response**
625 625  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
626 626  OK
627 627  )))
628 628  
606 +(% style="display:none" %) (%%)
629 629  
630 -
631 631  == 6.7 Print Last Received Data in Binary Format ==
632 632  
633 633  
... ... @@ -636,15 +636,15 @@
636 636  
637 637  (% style="color:blue" %)**AT Command: AT+RECVB**
638 638  
639 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
640 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB
641 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
616 +(% border="1" style="background-color:#f2f2f2; width:793.222px" %)
617 +|=(% colspan="3" style="width: 790px;background-color:#D9E2F3;color:#0070C0" %)AT+RECVB
618 +|(% style="background-color:#4F81BD;color:white; width:173px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:497px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:120px" %)**Response**
642 642  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
643 643  OK
644 644  )))
645 645  
623 +(% style="display:none" %) (%%)
646 646  
647 -
648 648  == 6.8 Send Text Data ==
649 649  
650 650  
... ... @@ -653,19 +653,16 @@
653 653  
654 654  (% style="color:blue" %)**AT Command: AT+SEND**
655 655  
656 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
657 -|=(% colspan="3" style="width: 988px;" %)AT+SEND
658 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
633 +(% border="1" style="background-color:#f2f2f2; width:991.222px" %)
634 +|=(% colspan="3" style="width: 988px;background-color:#D9E2F3;color:#0070C0" %)AT+SEND
635 +|(% style="background-color:#4F81BD;color:white; width:201px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:340px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:446px" %)**Response**
659 659  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
660 660  While Error in format, return
661 -
662 662  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
663 -
664 -
665 665  )))
666 666  
641 +(% style="display:none" %) (%%)
667 667  
668 -
669 669  == 6.9 Send Hexadecimal Data ==
670 670  
671 671  
... ... @@ -674,21 +674,18 @@
674 674  
675 675  (% style="color:blue" %)**AT Command: AT+SENDB**
676 676  
677 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
678 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
679 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
680 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
681 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
682 -AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
683 -
684 -
651 +(% border="1" style="background-color:f2f2f2; width:1101px" %)
652 +|=(% colspan="3" style="width: 1098px;background-color:#D9E2F3;color:#0070C0" %)AT+SENDB
653 +|(% style="background-color:#4F81BD;color:white; width:257px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:394px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:446px" %)**Response**
654 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
655 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
656 +AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
685 685  )))
686 686  
659 +(% style="display:none" %) (%%)
687 687  
688 -
689 689  = 7. LoRaWAN network management =
690 690  
691 -
692 692  == 7.1 Adaptive Data Rate ==
693 693  
694 694  
... ... @@ -697,9 +697,9 @@
697 697  
698 698  (% style="color:blue" %)**AT Command: AT+ADR**
699 699  
700 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
701 -|=(% colspan="3" style="width: 680px;" %)AT+ADR
702 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
671 +(% border="1" style="background-color:f2f2f2; width:683.222px" %)
672 +|=(% colspan="3" style="width: 680px;background-color:#D9E2F3;color:#0070C0" %)AT+ADR
673 +|(% style="background-color:#4F81BD;color:white; width:162px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:266px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:250px" %)**Response**
703 703  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
704 704  OK
705 705  )))
... ... @@ -708,17 +708,15 @@
708 708  AT_PARAM_ERROR
709 709  )))
710 710  
711 -
712 712  (% style="color:blue" %)**Downlink Command: 0x22**
713 713  
714 714  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
715 715  
716 -* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
717 -* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
686 +* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
687 +* **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
718 718  
689 +(% style="display:none" %) (%%)
719 719  
720 -
721 -
722 722  == 7.2 LoRa® Class ==
723 723  
724 724  
... ... @@ -725,11 +725,11 @@
725 725  Feature: Get or Set the Device Class(Currently only support class A, class C).
726 726  
727 727  
728 -(% style="color:blue" %)**AT Command:AT+CLASS**
697 +(% style="color:blue" %)**AT Command:  AT+CLASS**
729 729  
730 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
731 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS
732 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
699 +(% border="1" style="background-color:#f2f2f2; width:507.222px" %)
700 +|=(% colspan="3" style="width: 504px;background-color:#D9E2F3;color:#0070C0" %)AT+CLASS
701 +|(% style="background-color:#4F81BD;color:white; width:163px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:166px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:175px" %)**Response**
733 733  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
734 734  OK
735 735  )))
... ... @@ -737,19 +737,24 @@
737 737  
738 738  )))
739 739  
709 +(% style="display:none" %)
740 740  
711 +(% style="color:red" %)**Notice:**
741 741  
713 +* Run AT+FDR before running AT+CLASS=C
714 +* After change to Class=C, Before OTAA Join Successfule, the end node will still shows to use CLASS=A for OTAA Joined. It will use CLASS=C after OTAA Join Succeccful.
715 +
742 742  == 7.3 Duty Cycle Setting ==
743 743  
744 744  
745 -Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
719 +Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
746 746  
747 747  
748 -(% style="color:blue" %)**AT Command:AT+DCS**
722 +(% style="color:blue" %)**AT Command:  AT+DCS**
749 749  
750 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
751 -|=(% colspan="3" style="width: 512px;" %)AT+DCS
752 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
724 +(% border="1" style="background-color:#f2f2f2; width:515.222px" %)
725 +|=(% colspan="3" style="width: 512px;background-color:#D9E2F3;color:#0070C0" %)AT+DCS
726 +|(% style="background-color:#4F81BD;color:white; width:165px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:239px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:107px" %)**Response**
753 753  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
754 754  OK
755 755  )))
... ... @@ -757,19 +757,24 @@
757 757  
758 758  )))
759 759  
734 +(% style="display:none" %) (%%)
760 760  
761 -
762 762  == 7.4 Data Rate ==
763 763  
764 764  
765 -Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
739 +Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
766 766  
741 +(% style="color:red" %)
742 +**Notice:**
767 767  
744 +* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
745 +* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
746 +
768 768  (% style="color:blue" %)**AT Command: AT+DR**
769 769  
770 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
771 -|=(% colspan="3" style="width: 463px;" %)AT+DR
772 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
749 +(% border="1" style="background-color:#f2f2f2; width:466.222px" %)
750 +|=(% colspan="3" style="width: 463px;background-color:#D9E2F3;color:#0070C0" %)AT+DR
751 +|(% style="background-color:#4F81BD;color:white; width:156px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:167px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:140px" %)**Response**
773 773  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
774 774  OK
775 775  )))
... ... @@ -777,17 +777,15 @@
777 777  
778 778  )))
779 779  
780 -
781 781  (% style="color:blue" %)**Downlink Command: 0x2200aaFF**
782 782  
783 783  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
784 784  
785 -* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
786 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
763 +* **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
764 +* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
787 787  
766 +(% style="display:none" %) (%%)
788 788  
789 -
790 -
791 791  == 7.5 Frame Counter Downlink ==
792 792  
793 793  
... ... @@ -794,11 +794,11 @@
794 794  Feature: Get or Set the Frame Counter Downlink.
795 795  
796 796  
797 -(% style="color:blue" %)**AT Command:AT+FCD**
774 +(% style="color:blue" %)**AT Command:  AT+FCD**
798 798  
799 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
800 -|=(% colspan="3" style="width: 690px;" %)AT+FCD
801 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
776 +(% border="1" style="background-color:#f2f2f2; width:693.222px" %)
777 +|=(% colspan="3" style="width: 690px;background-color:#D9E2F3;color:#0070C0" %)AT+FCD
778 +|(% style="background-color:#4F81BD;color:white; width:162px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:258px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:269px" %)**Response**
802 802  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
803 803  OK
804 804  )))
... ... @@ -806,18 +806,18 @@
806 806  OK
807 807  )))
808 808  
786 +(% style="display:none" %) (%%)
809 809  
810 -
811 811  == 7.6 Frame Counter Uplink ==
812 812  
813 813  Feature: Get or Set the Frame Counter Uplink.
814 814  
815 815  
816 -(% style="color:blue" %)**AT Command:AT+FCU**
793 +(% style="color:blue" %)**AT Command:  AT+FCU**
817 817  
818 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
819 -|=(% colspan="3" style="width: 531px;" %)AT+FCU
820 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
795 +(% border="1" style="background-color:#f2f2f2; width:534.222px" %)
796 +|=(% colspan="3" style="width: 531px;background-color:#D9E2F3;color:#0070C0" %)AT+FCU
797 +|(% style="background-color:#4F81BD;color:white; width:177px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:239px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:113px" %)**Response**
821 821  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
822 822  OK
823 823  )))
... ... @@ -825,8 +825,8 @@
825 825  
826 826  )))
827 827  
805 +(% style="display:none" %) (%%)
828 828  
829 -
830 830  == 7.7 Join Accept Delay1 ==
831 831  
832 832  
... ... @@ -833,11 +833,11 @@
833 833  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
834 834  
835 835  
836 -(% style="color:blue" %)**AT Command:AT+JN1DL**
813 +(% style="color:blue" %)**AT Command:  AT+JN1DL**
837 837  
838 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
839 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
840 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
815 +(% border="1" style="background-color:#f2f2f2; width:537.222px" %)
816 +|=(% colspan="3" style="width: 534px;background-color:#D9E2F3;color:#0070C0" %)AT+JN1DL
817 +|(% style="background-color:#4F81BD;color:white; width:164px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:229px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:140px" %)**Response**
841 841  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
842 842  OK
843 843  )))
... ... @@ -845,18 +845,19 @@
845 845  
846 846  )))
847 847  
825 +(% style="display:none" %) (%%)
848 848  
849 -
850 850  == 7.8 Join Accept Delay2 ==
851 851  
829 +
852 852  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
853 853  
854 854  
855 -(% style="color:blue" %)**AT Command:AT+JN2DL**
833 +(% style="color:blue" %)**AT Command:  AT+JN2DL**
856 856  
857 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
858 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
859 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
835 +(% border="1" style="background-color:#f2f2f2; width:538.222px" %)
836 +|=(% colspan="3" style="width: 535px;background-color:#D9E2F3;color:#0070C0" %)AT+JN2DL
837 +|(% style="background-color:#4F81BD;color:white; width:160px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:228px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:146px" %)**Response**
860 860  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
861 861  OK
862 862  )))
... ... @@ -864,19 +864,21 @@
864 864  
865 865  )))
866 866  
845 +(% style="display:none" %) (%%)
846 +
867 867  == 7.9 Public Network Mode ==
868 868  
869 869  
870 870  Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
871 871  
872 -(% style="color:red" %)Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
852 +(% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
873 873  
874 874  
875 -(% style="color:blue" %)**AT Command:AT+PNM**
855 +(% style="color:blue" %)**AT Command:  AT+PNM**
876 876  
877 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
878 -|=(% colspan="3" style="width: 664px;" %)AT+PNM
879 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
857 +(% border="1" style="background-color:#f2f2f2; width:667.222px" %)
858 +|=(% colspan="3" style="width: 664px;background-color:#D9E2F3;color:#0070C0" %)AT+PNM
859 +|(% style="background-color:#4F81BD;color:white; width:166px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:225px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:272px" %)**Response**
880 880  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
881 881  OK
882 882  )))
... ... @@ -891,6 +891,8 @@
891 891  )))
892 892  |(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
893 893  
874 +(% style="display:none" %) (%%)
875 +
894 894  == 7.10 Receive Delay1 ==
895 895  
896 896  
... ... @@ -897,11 +897,11 @@
897 897  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
898 898  
899 899  
900 -(% style="color:blue" %)**AT Command:AT+RX1DL**
882 +(% style="color:blue" %)**AT Command: AT+RX1DL**
901 901  
902 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
903 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
904 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
884 +(% border="1" style="background-color:#f2f2f2; width:408.222px" %)
885 +|=(% colspan="3" style="width: 405px;background-color:#D9E2F3;color:#0070C0" %)AT+RX1DL
886 +|(% style="background-color:#4F81BD;color:white; width:155px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:128px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:122px" %)**Response**
905 905  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
906 906  OK
907 907  )))
... ... @@ -909,6 +909,7 @@
909 909  
910 910  )))
911 911  
894 +(% style="display:none" %) (%%)
912 912  
913 913  == 7.11 Receive Delay2 ==
914 914  
... ... @@ -916,11 +916,11 @@
916 916  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
917 917  
918 918  
919 -(% style="color:blue" %)**AT Command:AT+RX2DL**
902 +(% style="color:blue" %)**AT Command: AT+RX2DL**
920 920  
921 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
922 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
923 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
904 +(% border="1" style="background-color:#f2f2f2; width:481.222px" %)
905 +|=(% colspan="3" style="width: 478px;background-color:#D9E2F3;color:#0070C0" %)AT+RX2DL
906 +|(% style="background-color:#4F81BD;color:white; width:175px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:152px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:150px" %)**Response**
924 924  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
925 925  OK
926 926  )))
... ... @@ -928,6 +928,7 @@
928 928  
929 929  )))
930 930  
914 +(% style="display:none" %) (%%)
931 931  
932 932  == 7.12 Rx2 Window Data Rate ==
933 933  
... ... @@ -935,11 +935,11 @@
935 935  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
936 936  
937 937  
938 -(% style="color:blue" %)**AT Command:AT+RX2DR**
922 +(% style="color:blue" %)**AT Command:  AT+RX2DR**
939 939  
940 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
941 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
942 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
924 +(% border="1" style="background-color:#f2f2f2; width:525.222px" %)
925 +|=(% colspan="3" style="width: 522px;background-color:#D9E2F3;color:#0070C0" %)AT+RX2DR
926 +|(% style="background-color:#4F81BD;color:white; width:160px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:232px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:130px" %)**Response**
943 943  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
944 944  OK
945 945  )))
... ... @@ -947,6 +947,7 @@
947 947  
948 948  )))
949 949  
934 +(% style="display:none" %) (%%)
950 950  
951 951  == 7.13 Rx2 Window Frequency ==
952 952  
... ... @@ -954,11 +954,11 @@
954 954  Feature: Get or Set the Rx2 window frequency
955 955  
956 956  
957 -(% style="color:blue" %)**AT Command:AT+RX2FQ**
942 +(% style="color:blue" %)**AT Command:  AT+RX2FQ**
958 958  
959 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
960 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
961 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
944 +(% border="1" style="background-color:#f2f2f2; width:587.222px" %)
945 +|=(% colspan="3" style="width: 584px;background-color:#D9E2F3;color:#0070C0" %)AT+RX2FQ
946 +|(% style="background-color:#4F81BD;color:white; width:183px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:240px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:160px" %)**Response**
962 962  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
963 963  OK
964 964  )))
... ... @@ -966,6 +966,7 @@
966 966  
967 967  )))
968 968  
954 +(% style="display:none" %) (%%)
969 969  
970 970  == 7.14 Transmit Power ==
971 971  
... ... @@ -972,12 +972,14 @@
972 972  
973 973  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
974 974  
961 +(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
975 975  
976 -(% style="color:blue" %)**AT Command:AT+TXP**
977 977  
978 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
979 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
980 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
964 +(% style="color:blue" %)**AT Command:  AT+TXP**
965 +
966 +(% border="1" style="background-color:#f2f2f2; width:465.222px" %)
967 +|=(% colspan="3" style="width: 462px;background-color:#D9E2F3;color:#0070C0" %)AT+TXP
968 +|(% style="background-color:#4F81BD;color:white; width:161px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:189px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:112px" %)**Response**
981 981  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
982 982  OK
983 983  )))
... ... @@ -989,11 +989,11 @@
989 989  
990 990  If the downlink payload=22000100, it means setting the TXP to 0.
991 991  
992 -* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
993 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
980 +* **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
981 +* **Example 2**: Downlink Payload: **22000000**  ~/~/ Set AT+TXP=0.
994 994  
983 +(% style="display:none" %) (%%)
995 995  
996 -
997 997  == 7.15 RSSI of the Last Received Packet ==
998 998  
999 999  
... ... @@ -1002,13 +1002,14 @@
1002 1002  
1003 1003  (% style="color:blue" %)**AT Command:AT+RSSI**
1004 1004  
1005 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
1006 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
1007 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
993 +(% border="1" style="background-color:#f2f2f2; width:557.222px" %)
994 +|=(% colspan="3" style="width: 554px;background-color:#D9E2F3;color:#0070C0" %)AT+RSSI
995 +|(% style="background-color:#4F81BD;color:white; width:164px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:289px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:100px" %)**Response**
1008 1008  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
1009 1009  OK
1010 1010  )))
1011 1011  
1000 +(% style="display:none" %) (%%)
1012 1012  
1013 1013  == 7.16 SNR of the Last Received Packet ==
1014 1014  
... ... @@ -1016,15 +1016,16 @@
1016 1016  Feature: Get the SNR of the last received packet
1017 1017  
1018 1018  
1019 -(% style="color:blue" %)**AT Command:AT+SNR**
1008 +(% style="color:blue" %)**AT Command:  AT+SNR**
1020 1020  
1021 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
1022 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
1023 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
1010 +(% border="1" style="background-color:#f2f2f2; width:571.222px" %)
1011 +|=(% colspan="3" style="width: 568px;background-color:#D9E2F3;color:#0070C0" %)AT+SNR
1012 +|(% style="background-color:#4F81BD;color:white; width:164px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:290px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:113px" %)**Response**
1024 1024  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
1025 1025  OK
1026 1026  )))
1027 1027  
1017 +(% style="display:none" %) (%%)
1028 1028  
1029 1029  == 7.17 Application Port ==
1030 1030  
... ... @@ -1034,9 +1034,9 @@
1034 1034  
1035 1035  (% style="color:blue" %)**AT Command: AT+PORT**
1036 1036  
1037 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
1038 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
1039 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
1027 +(% border="1" style="background-color:#f2f2f2; width:500.222px" %)
1028 +|=(% colspan="3" style="width: 497px;background-color:#D9E2F3;color:#0070C0" %)AT+PORT
1029 +|(% style="background-color:#4F81BD;color:white; width:157px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:204px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:135px" %)**Response**
1040 1040  |(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
1041 1041  OK
1042 1042  )))
... ... @@ -1048,11 +1048,11 @@
1048 1048  
1049 1049  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
1050 1050  
1051 -* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
1052 -* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
1041 +* **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1042 +* **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1053 1053  
1044 +(% style="display:none" %) (%%)
1054 1054  
1055 -
1056 1056  == 7.18 Single Channel Mode ==
1057 1057  
1058 1058  
... ... @@ -1061,25 +1061,27 @@
1061 1061  
1062 1062  (% style="color:blue" %)**AT Command: AT+CHS**
1063 1063  
1064 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
1065 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
1066 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
1054 +(% border="1" style="background-color:#f2f2f2; width:603.222px" %)
1055 +|=(% colspan="3" style="width: 600px;background-color:#D9E2F3;color:#0070C0" %)AT+CHS
1056 +|(% style="background-color:#4F81BD;color:white; width:182px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:295px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:122px" %)**Response**
1067 1067  |(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
1068 1068  OK
1069 1069  )))
1070 1070  |(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
1071 1071  
1062 +(% style="display:none" %) (%%)
1072 1072  
1073 1073  == 7.19 Eight Channel Mode ==
1074 1074  
1066 +
1075 1075  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1076 1076  
1077 1077  
1078 1078  (% style="color:blue" %)**AT Command: AT+CHE**
1079 1079  
1080 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1081 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
1082 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1072 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
1073 +|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+CHE
1074 +|(% style="background-color:#4F81BD;color:white; width:160px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:198px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:349px" %)**Response**
1083 1083  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
1084 1084  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
1085 1085  
... ... @@ -1087,17 +1087,17 @@
1087 1087  )))
1088 1088  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1089 1089  
1090 -(% style="color:blue" %)**Downlink Command: 0x24**
1082 +(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
1091 1091  
1092 1092  Format: Command Code (0x24) followed by 1 bytes channel value.
1093 1093  
1094 1094  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1095 1095  
1096 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1097 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
1088 +* **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1089 +* **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1098 1098  
1091 +(% style="display:none" %) (%%)
1099 1099  
1100 -
1101 1101  == 7.20 Get or Set RXwindows1 timeout ==
1102 1102  
1103 1103  
... ... @@ -1106,31 +1106,27 @@
1106 1106  
1107 1107  (% style="color:blue" %)**AT Command: AT+RX1WTO**
1108 1108  
1109 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1110 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1111 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1101 +(% border="1" style="background-color:#f2f2f2; width:460.222px" %)
1102 +|=(% colspan="3" style="width: 457px;background-color:#D9E2F3;color:#0070C0" %)AT+ RX1WTO
1103 +|(% style="background-color:#4F81BD;color:white; width:163px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:201px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:93px" %)**Response**
1112 1112  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
1113 1113  OK
1114 1114  )))
1115 1115  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1116 1116  
1117 -(((
1118 -
1109 +(% style="display:none" %) (%%)
1119 1119  
1120 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1121 -
1122 -
1111 +(((
1112 +(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1123 1123  )))
1124 1124  
1125 1125  [[image:image-20220526162535-1.png]]
1126 1126  
1127 -
1128 1128  (((
1129 1129  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1130 -
1131 -
1132 1132  )))
1133 1133  
1121 +
1134 1134  == 7.21 Get or Set RXwindows2 timeout ==
1135 1135  
1136 1136  
... ... @@ -1139,14 +1139,15 @@
1139 1139  
1140 1140  (% style="color:blue" %)**AT Command: AT+RX2WTO**
1141 1141  
1142 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1143 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1144 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1130 +(% border="1" style="background-color:#f2f2f2; width:497.222px" %)
1131 +|=(% colspan="3" style="width: 494px;background-color:#D9E2F3;color:#0070C0" %)AT+ RX2WTO
1132 +|(% style="background-color:#4F81BD;color:white; width:190px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:199px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:104px" %)**Response**
1145 1145  |(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
1146 1146  OK
1147 1147  )))
1148 1148  |(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1149 1149  
1138 +(% style="display:none" %) (%%)
1150 1150  
1151 1151  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1152 1152  
... ... @@ -1156,9 +1156,9 @@
1156 1156  
1157 1157  (% style="color:blue" %)**AT Command: AT+DWELLT**
1158 1158  
1159 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1160 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1161 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1148 +(% border="1" style="background-color:#f2f2f2; width:497.222px" %)
1149 +|=(% colspan="3" style="width: 494px;background-color:#D9E2F3;color:#0070C0" %)AT+DWELLT
1150 +|(% style="background-color:#4F81BD;color:white; width:183px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:179px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:131px" %)**Response**
1162 1162  |(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
1163 1163  OK
1164 1164  )))
... ... @@ -1170,11 +1170,11 @@
1170 1170  
1171 1171  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1172 1172  
1173 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1174 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1162 +* **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1163 +* **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1175 1175  
1165 +(% style="display:none" %) (%%)
1176 1176  
1177 -
1178 1178  == 7.23 Set Packet Receiving Response Level ==
1179 1179  
1180 1180  
... ... @@ -1181,7 +1181,7 @@
1181 1181  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1182 1182  
1183 1183  
1184 -RPL value:
1173 +(% style="color:blue" %)**RPL value:**
1185 1185  
1186 1186  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1187 1187  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
... ... @@ -1189,19 +1189,17 @@
1189 1189  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1190 1190  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1191 1191  
1181 +(% style="color:blue" %)**Case Analyes:**
1192 1192  
1193 -Case Analyes:
1194 -
1195 1195  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1196 1196  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1197 1197  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1198 1198  
1199 -
1200 1200  (% style="color:blue" %)**AT Command: AT+RPL**
1201 1201  
1202 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1203 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1204 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1189 +(% border="1" style="background-color:#f2f2f2; width:536.222px" %)
1190 +|=(% colspan="3" style="width: 533px;background-color:#D9E2F3;color:#0070C0" %)AT+RPL
1191 +|(% style="background-color:#4F81BD;color:white; width:160px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:263px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:109px" %)**Response**
1205 1205  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
1206 1206  OK
1207 1207  )))
... ... @@ -1213,23 +1213,27 @@
1213 1213  
1214 1214  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1215 1215  
1216 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1217 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1203 +* **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1204 +* **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1218 1218  
1206 +(% style="display:none" %) (%%)
1219 1219  
1220 -
1221 1221  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1222 1222  
1223 1223  
1224 1224  (% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1225 1225  
1226 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1227 -|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1228 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1229 -|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1213 +(% border="1" style="background-color:#f2f2f2; width:589px" %)
1214 +|=(% colspan="3" style="width: 586px;background-color:#D9E2F3;color:#0070C0" %)AT+**SETMAXNBTRANS**
1215 +|(% style="background-color:#4F81BD;color:white; width:227px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:300px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:87px" %)**Response**
1216 +|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1230 1230  OK
1231 1231  )))
1232 -|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1219 +|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1220 +value2: 0: uplink fcnt doesn't change for each NBTrans;
1221 +
1222 +1: uplink fcnt increase by 1 for each NBTrans.
1223 +)))|(% style="width:87px" %)(((
1233 1233  1
1234 1234  
1235 1235  OK
... ... @@ -1241,19 +1241,24 @@
1241 1241  
1242 1242  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1243 1243  
1244 -* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1245 -* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1235 +* Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1236 +* Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1246 1246  
1238 +(% style="display:none" %) (%%)
1247 1247  
1248 -
1249 1249  == 7.25 Device offline rejoining （LWS007) ==
1250 1250  
1251 1251  
1252 1252  (% style="color:blue" %)**AT Command: AT+DDETECT**
1253 1253  
1254 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1255 -|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1256 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1245 +AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
1246 +
1247 +* ACK_Timout_1: Unit: min
1248 +* ACK_Timout_2: Unit: min
1249 +
1250 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
1251 +|=(% colspan="3" style="width: 707px;background-color:#D9E2F3;color:#0070C0" %)AT+**DDETECT**
1252 +|(% style="background-color:#4F81BD;color:white; width:160px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:198px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:349px" %)**Response**
1257 1257  |(% style="width:160px" %)(((
1258 1258  AT+DDETECT=1,1440,2880
1259 1259  
... ... @@ -1282,33 +1282,37 @@
1282 1282  OK
1283 1283  )))
1284 1284  
1285 -(% style="color:blue" %)**Downlink Command: 0x33**
1281 +(% style="color:blue" %)**Downlink Command: 0x32**
1286 1286  
1287 1287  Format: Command Code (0x32) followed by 2 bytes mode value.
1288 1288  
1289 -If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1285 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1290 1290  
1291 -* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1287 +* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1288 +** 0x01 : Flag
1289 +** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1290 +** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
1291 +** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1292 1292  
1293 +(% style="display:none" %) (%%)
1293 1293  
1294 -
1295 1295  == 7.26 Request the server to send an ACK ==
1296 1296  
1297 1297  
1298 1298  (% style="color:blue" %)**AT Command: AT+PNACKMD**
1299 1299  
1300 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1301 -|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1302 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1300 +(% border="1" style="background-color:#f2f2f2; width:536.222px" %)
1301 +|=(% colspan="3" style="width: 533px;background-color:#D9E2F3;color:#0070C0" %)**AT+PNACKMD**
1302 +|(% style="background-color:#4F81BD;color:white; width:160px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:263px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:109px" %)**Response**
1303 1303  |(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1304 1304  OK
1305 1305  )))
1306 1306  |(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1307 1307  0
1308 -
1309 1309  OK
1310 1310  )))
1311 1311  
1311 +(% style="display:none" %) (%%)
1312 1312  
1313 1313  == 7.27 Adjust network rejoining interval ==
1314 1314  
... ... @@ -1315,16 +1315,16 @@
1315 1315  
1316 1316  (% style="color:blue" %)**AT Command: AT+RJTDC**
1317 1317  
1318 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1319 -|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1320 -|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1321 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1318 +(% border="1" style="background-color:#f2f2f2; width:727.222px" %)
1319 +|=(% colspan="3" style="width: 724px;background-color:#D9E2F3;color:#0070C0" %)AT+RJTDC
1320 +|(% style="background-color:#4F81BD;color:white; width:165px" %)**Command Example**|(% style="background-color:#4F81BD;color:white; width:227px" %)**Function**|(% style="background-color:#4F81BD;color:white; width:329px" %)**Response**
1321 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1322 1322  OK
1323 1323  
1324 -the interval is 30000ms = 30s
1324 +the interval is 30 min
1325 1325  )))
1326 -|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1327 -Set the ReJoin data transmission interval to 60000ms = 60 seconds
1326 +|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1327 +Set the ReJoin data transmission interval to 60 min
1328 1328  )))
1329 1329  
1330 1330  (% style="color:blue" %)**Downlink Command: 0x26**
... ... @@ -1333,21 +1333,21 @@
1333 1333  
1334 1334  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1335 1335  
1336 -* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1337 -* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1336 +* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1337 +* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1338 1338  
1339 +(% style="display:none" %) (%%)
1339 1339  
1340 -
1341 1341  = 8. AT Commands Combination =
1342 1342  
1343 -
1344 1344  == 8.1 Set a fix RX2DR for downlink window ==
1345 1345  
1346 1346  
1347 -* **AT+ADR=0             ** **~-~->**  Disable ADR first
1348 -* **AT+RX2DR=xxxx**  **~-~->**  Set xxxx to your wanted DataRate
1346 +* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1349 1349  
1348 +* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1350 1350  
1350 +(% style="display:none" %) (%%)
1351 1351  
1352 1352  == 8.2 Use Downlink Command to set a fix uplink DR ==
1353 1353  
... ... @@ -1356,6 +1356,10 @@
1356 1356  
1357 1357  **Same as:**
1358 1358  
1359 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1360 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1361 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1359 +* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1360 +
1361 +* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1362 +
1363 +* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1364 +
1365 +

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0