Last modified by kai on 2024/09/06 10:00
<
From version < 51.12 >
edited by Xiaoling
on 2022/07/13 14:13
To version < 63.41 >
edited by Xiaoling
on 2023/05/29 14:51
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -9,41 +9,33 @@
9 9  
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 -* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
13 -* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
12 +* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 +* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 15  (((
16 16  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17 -
18 18  )))
19 19  
19 +
20 20  = 2. How to use AT Commands or Downlink command =
21 21  
22 22  
23 -* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 -* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 +* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 +* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
25 25  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
27 27  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
28 28  
29 +(% style="display:none" %) (%%)
29 29  
30 -
31 -
32 32  = 3. Support End Node and firmware version =
33 33  
34 34  
35 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
36 -|=(% colspan="3" style="width: 963px;" %)(((
37 37  Dragino STM32 base hardware Firmware / LoRaWAN stack list
38 -)))
35 +
36 +(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:966px" %)
37 +|(% style="background-color:#4f81bd; color:white; width:187px" %)**Model**|(% style="background-color:#4f81bd; color:white; width:330px" %)**Description**|(% style="background-color:#4f81bd; color:white; width:445px" %)**Firmware Version <~-~-> Stack Version**
39 39  |(% style="width:187px" %)(((
40 -**Model**
41 -)))|(% style="width:330px" %)(((
42 -**Description**
43 -)))|(% style="width:445px" %)(((
44 -**Firmware Version <~-~-> Stack Version**
45 -)))
46 -|(% style="width:187px" %)(((
47 47  [[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
48 48  )))|(% style="width:330px" %)(((
49 49  Open Source Generic LoRaWAN Sensor Node
... ... @@ -103,12 +103,10 @@
103 103  )))
104 104  )))
105 105  
98 +(% style="display:none" %) (%%)
106 106  
107 -
108 -
109 109  = 4. System Management Commands =
110 110  
111 -
112 112  == 4.1 Change Uplink Interval ==
113 113  
114 114  
... ... @@ -117,9 +117,8 @@
117 117  
118 118  (% style="color:blue" %)**AT Command: AT+TDC**
119 119  
120 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
121 -|=(% colspan="3" style="width: 724px;" %)AT+TDC
122 -|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
110 +(% border="1" style="background-color:#f2f2f2; width:727.222px" %)
111 +|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:329px" %)**Response**
123 123  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
124 124  OK
125 125  
... ... @@ -130,8 +130,6 @@
130 130  )))
131 131  
132 132  (((
133 -
134 -
135 135  (% style="color:blue" %)**Downlink Command: 0x01**
136 136  
137 137  Format: Command Code (0x01) followed by 3 bytes time value.
... ... @@ -138,15 +138,14 @@
138 138  )))
139 139  
140 140  (((
141 -If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
128 +If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
142 142  )))
143 143  
144 -* **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
145 -* **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
131 +* **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
132 +* **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
146 146  
134 +(% style="display:none" %) (%%)
147 147  
148 -
149 -
150 150  == 4.2 Reboot End Node ==
151 151  
152 152  
... ... @@ -153,12 +153,11 @@
153 153  Feature: Reboot End Node to perform a new OTAA or ABP Join.
154 154  
155 155  
156 -(% style="color:blue" %)**AT Command: ATZ**
142 +(% style="color:blue" %)**AT Command: ATZ  ~/~/ **(%%)Trig a reset of the MCU
157 157  
158 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
159 -|=(% colspan="3" %)ATZ: Trig a reset of the MCU
160 -|**Command Example**|**Function**|**Response**
161 -|ATZ|Reset MCU|(((
144 +(% border="1" style="background-color:#f2f2f2; width:546px" %)
145 +|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:92px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:294px" %)**Response**
146 +|(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
162 162  Device reset and show booting info
163 163  
164 164  LSN50 Device/LoRa ST Module
... ... @@ -179,11 +179,10 @@
179 179  )))
180 180  
181 181  (((
182 -If the downlink payload=**04FF**, the end node will reboot.
183 -
184 -
167 +If the downlink payload=**04FF**, the end node will reboot.
185 185  )))
186 186  
170 +
187 187  == 4.3 Reset to factory Default ==
188 188  
189 189  
... ... @@ -190,12 +190,11 @@
190 190  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
191 191  
192 192  
193 -(% style="color:blue" %)**AT Command: AT+FDR**
177 +(% style="color:blue" %)**AT Command: AT+FDR  ~/~/  **(%%)Reset to factory default
194 194  
195 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
196 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default
197 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
198 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
179 +(% border="1" style="background-color:#f2f2f2; width:789px" %)
180 +|(% style="background-color:#4f81bd; color:white; width:154px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:175px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:456px" %)**Response**
181 +|(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
199 199  Device reset to factory default parameters and show booting info
200 200  
201 201  LSN50 Device/LoRa ST Module
... ... @@ -226,12 +226,11 @@
226 226  Feature: Show firmware version. No downlink command yet.
227 227  
228 228  
229 -(% style="color:blue" %)**AT Command: AT+VER**
212 +(% style="color:blue" %)**AT Command: AT+VER  ~/~/   **(%%)Image Version and Frequency Band
230 230  
231 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
232 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
233 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
234 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
214 +(% border="1" style="background-color:#f2f2f2; width:542px" %)
215 +|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:86px" %)**Response**
216 +|(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
235 235  1.3 EU868
236 236  
237 237  OK
... ... @@ -250,8 +250,7 @@
250 250  (((
251 251  
252 252  
253 -
254 -**xx: Software Type:**
235 +(% style="color:#037691" %)**xx: Software Type:**
255 255  )))
256 256  
257 257  * 0x00 01: LGT92 Version
... ... @@ -261,7 +261,7 @@
261 261  (((
262 262  
263 263  
264 -**yy: Frequency Band:**
245 +(% style="color:#037691" %)**yy: Frequency Band:**
265 265  )))
266 266  
267 267  * 0x01: EU868
... ... @@ -278,7 +278,7 @@
278 278  (((
279 279  
280 280  
281 -**zz: Subband**
262 +(% style="color:#037691" %)**zz: Subband**
282 282  )))
283 283  
284 284  firmware version: v1.1.0 ~-~-> 110
... ... @@ -290,30 +290,23 @@
290 290  Feature: Show All configure. No downlink command yet.
291 291  
292 292  
293 -(% style="color:blue" %)**AT Command: AT+CFG**
274 +(% style="color:blue" %)**AT Command: AT+CFG  ~/~/ **(%%)Print all configurations
294 294  
295 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
296 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
297 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
276 +(% border="1" style="background-color:#f2f2f2; width:599.222px" %)
277 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:154px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:280px" %)**Response**
298 298  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
299 299  AT+DEUI = XX XX XX XX XX XX XX XX
300 -
301 301  AT+DADDR=XXXXXXXX
302 -
303 303  ……….
304 -
305 305  AT+RX2WTO=X
306 -
307 307  AT+CHS=868100000
308 -
309 309  OK
310 310  )))
311 311  
287 +(% style="display:none" %) (%%)
312 312  
313 -
314 314  = 5. Keys, IDs and EUIs management =
315 315  
316 -
317 317  == 5.1 Application EUI ==
318 318  
319 319  
... ... @@ -322,16 +322,15 @@
322 322  
323 323  (% style="color:blue" %)**AT Command: AT+APPEUI**
324 324  
325 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
326 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI
327 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
299 +(% border="1" style="background-color:#f2f2f2; width:686.222px" %)
300 +|(% style="background-color:#4f81bd; color:white; width:305px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:186px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:191px" %)**Response**
328 328  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
329 329  OK
330 330  )))
331 331  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
332 332  
306 +(% style="display:none" %) (%%)
333 333  
334 -
335 335  == 5.2 Application Key ==
336 336  
337 337  
... ... @@ -340,16 +340,15 @@
340 340  
341 341  (% style="color:blue" %)**AT Command: AT+APPKEY**
342 342  
343 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
344 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY
345 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
316 +(% border="1" style="background-color:#f2f2f2; width:976.222px" %)
317 +|(% style="background-color:#4f81bd; color:white; width:441px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:180px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:350px" %)**Response**
346 346  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
347 347  OK
348 348  )))
349 349  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
350 350  
323 +(% style="display:none" %) (%%)
351 351  
352 -
353 353  == 5.3 Application Session Key ==
354 354  
355 355  
... ... @@ -358,9 +358,8 @@
358 358  
359 359  (% style="color:blue" %)**AT Command: AT+APPSKEY**
360 360  
361 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
362 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
363 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
333 +(% border="1" style="background-color:#f2f2f2; width:1040.22px" %)
334 +|(% style="background-color:#4f81bd; color:white; width:451px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:231px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:354px" %)**Response**
364 364  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
365 365  OK
366 366  )))
... ... @@ -368,8 +368,8 @@
368 368  OK
369 369  )))
370 370  
342 +(% style="display:none" %) (%%)
371 371  
372 -
373 373  == 5.4 Device Address ==
374 374  
375 375  
... ... @@ -378,9 +378,8 @@
378 378  
379 379  (% style="color:blue" %)**AT Command: AT+DADDR**
380 380  
381 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
382 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR
383 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
352 +(% border="1" style="background-color:#f2f2f2; width:795.222px" %)
353 +|(% style="background-color:#4f81bd; color:white; width:192px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:241px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:359px" %)**Response**
384 384  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
385 385  A8 40 41 FF
386 386  
... ... @@ -388,8 +388,8 @@
388 388  )))
389 389  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
390 390  
361 +(% style="display:none" %) (%%)
391 391  
392 -
393 393  == 5.5 Device EUI ==
394 394  
395 395  
... ... @@ -398,9 +398,8 @@
398 398  
399 399  (% style="color:blue" %)**AT Command: AT+DEUI**
400 400  
401 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
402 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI
403 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
371 +(% border="1" style="background-color:#f2f2f2; width:1035.22px" %)
372 +|(% style="background-color:#4f81bd; color:white; width:250px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:634px" %)**Response**
404 404  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
405 405  OK
406 406  )))
... ... @@ -408,8 +408,8 @@
408 408  OK
409 409  )))
410 410  
380 +(% style="display:none" %) (%%)
411 411  
412 -
413 413  == 5.6 Network ID ==
414 414  
415 415  
... ... @@ -418,16 +418,15 @@
418 418  
419 419  (% style="color:blue" %)**AT Command: AT+NWKID**
420 420  
421 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
422 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID
423 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
390 +(% border="1" style="background-color:#f2f2f2; width:448.222px" %)
391 +|(% style="background-color:#4f81bd; color:white; width:191px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:153px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
424 424  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
425 425  OK
426 426  )))
427 427  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
428 428  
397 +(% style="display:none" %) (%%)
429 429  
430 -
431 431  == 5.7 Network Session Key ==
432 432  
433 433  
... ... @@ -436,22 +436,19 @@
436 436  
437 437  (% style="color:blue" %)**AT Command: AT+NWKSKEY**
438 438  
439 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
440 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
441 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
407 +(% border="1" style="background-color:#f2f2f2; width:1017.22px" %)
408 +|(% style="background-color:#4f81bd; color:white; width:455px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:215px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:343px" %)**Response**
442 442  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
443 443  OK
444 444  )))
445 445  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
446 446  
414 +(% style="display:none" %) (%%)
447 447  
448 -
449 449  = 6. Joining and sending date on LoRaWAN network =
450 450  
451 -
452 452  == 6.1 Confirm Mode ==
453 453  
454 -
455 455  === 6.1.1  AT+CFM command before DR-LWS007 software stack ===
456 456  
457 457  
... ... @@ -460,9 +460,8 @@
460 460  
461 461  (% style="color:blue" %)**AT Command: AT+CFM**
462 462  
463 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
428 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
429 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:205px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:346px" %)**Response**
466 466  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
467 467  OK
468 468  )))
... ... @@ -475,20 +475,18 @@
475 475  
476 476  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
477 477  
478 -* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
479 -* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
442 +* **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
443 +* **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
480 480  
445 +(% style="display:none" %) (%%)
481 481  
482 -
483 -
484 484  === 6.1.2  AT+CFM command since DR-LWS007 software stack ===
485 485  
486 486  
487 487  (% style="color:blue" %)**AT Command: AT+CFM**
488 488  
489 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
490 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
491 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
452 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
453 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
492 492  |(% style="width:160px" %)(((
493 493  AT+CFM=1,0,0
494 494  
... ... @@ -523,12 +523,11 @@
523 523  
524 524  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
525 525  
526 -* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
527 -* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
488 +* **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
489 +* **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
528 528  
491 +(% style="display:none" %) (%%)
529 529  
530 -
531 -
532 532  == 6.2 Confirm Status ==
533 533  
534 534  
... ... @@ -537,15 +537,14 @@
537 537  
538 538  (% style="color:blue" %)**AT Command: AT+CFS**
539 539  
540 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
541 -|=(% colspan="3" style="width: 531px;" %)AT+CFS
542 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
543 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
501 +(% border="1" style="background-color:#f2f2f2; width:463px" %)
502 +|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
503 +|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
544 544  OK
545 545  )))
546 546  
507 +(% style="display:none" %) (%%)
547 547  
548 -
549 549  == 6.3 Join LoRa® Network ==
550 550  
551 551  
... ... @@ -554,17 +554,15 @@
554 554  
555 555  (% style="color:blue" %)**AT Command: AT+JOIN**
556 556  
557 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
558 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN
559 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
517 +(% border="1" style="background-color:#f2f2f2; width:647.222px" %)
518 +|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:334px" %)**Response**
560 560  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
561 561  OK
562 -
563 563  While Error in format, return AT_BUSY_ERROR
564 564  )))
565 565  
524 +(% style="display:none" %) (%%)
566 566  
567 -
568 568  == 6.4 LoRa® Network Join Mode ==
569 569  
570 570  
... ... @@ -573,9 +573,8 @@
573 573  
574 574  (% style="color:blue" %)**AT Command: AT+NJM**
575 575  
576 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
577 -|=(% colspan="3" style="width: 750px;" %)AT+NJM
578 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
534 +(% border="1" style="background-color:#f2f2f2; width:753.222px" %)
535 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
579 579  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
580 580  OK
581 581  )))
... ... @@ -588,12 +588,11 @@
588 588  
589 589  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
590 590  
591 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
592 -* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
548 +* **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
549 +* **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
593 593  
551 +(% style="display:none" %) (%%)
594 594  
595 -
596 -
597 597  == 6.5 LoRa® Network Join Status ==
598 598  
599 599  
... ... @@ -602,15 +602,14 @@
602 602  
603 603  (% style="color:blue" %)**AT Command: AT+NJS**
604 604  
605 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
606 -|=(% colspan="3" style="width: 495px;" %)AT+NJS
607 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
561 +(% border="1" style="background-color:#f2f2f2; width:498.222px" %)
562 +|(% style="background-color:#4f81bd; color:white; width:169px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:164px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:161px" %)**Response**
608 608  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
609 609  OK
610 610  )))
611 611  
567 +(% style="display:none" %) (%%)
612 612  
613 -
614 614  == 6.6 Print Last Received Data in Raw Format ==
615 615  
616 616  
... ... @@ -619,15 +619,14 @@
619 619  
620 620  (% style="color:blue" %)**AT Command: AT+RECV**
621 621  
622 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
623 -|=(% colspan="3" style="width: 584px;" %)AT+RECV
624 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
577 +(% border="1" style="background-color:#f2f2f2; width:587.222px" %)
578 +|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:150px" %)**Response**
625 625  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
626 626  OK
627 627  )))
628 628  
583 +(% style="display:none" %) (%%)
629 629  
630 -
631 631  == 6.7 Print Last Received Data in Binary Format ==
632 632  
633 633  
... ... @@ -636,13 +636,14 @@
636 636  
637 637  (% style="color:blue" %)**AT Command: AT+RECVB**
638 638  
639 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
640 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB
641 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
593 +(% border="1" style="background-color:#f2f2f2; width:793.222px" %)
594 +|(% style="background-color:#4f81bd; color:white; width:173px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:497px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:120px" %)**Response**
642 642  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
643 643  OK
644 644  )))
645 645  
599 +(% style="display:none" %) (%%)
600 +
646 646  == 6.8 Send Text Data ==
647 647  
648 648  
... ... @@ -651,17 +651,15 @@
651 651  
652 652  (% style="color:blue" %)**AT Command: AT+SEND**
653 653  
654 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
655 -|=(% colspan="3" style="width: 988px;" %)AT+SEND
656 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
609 +(% border="1" style="background-color:#f2f2f2; width:991.222px" %)
610 +|(% style="background-color:#4f81bd; color:white; width:201px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:340px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:446px" %)**Response**
657 657  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
658 658  While Error in format, return
659 -
660 660  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
661 -
662 -
663 663  )))
664 664  
616 +(% style="display:none" %) (%%)
617 +
665 665  == 6.9 Send Hexadecimal Data ==
666 666  
667 667  
... ... @@ -670,19 +670,17 @@
670 670  
671 671  (% style="color:blue" %)**AT Command: AT+SENDB**
672 672  
673 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
674 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
675 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
676 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
677 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
678 -AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
679 -
680 -
626 +(% border="1" style="width:974px" %)
627 +|(% style="background-color:#4f81bd; color:white; width:257px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:394px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:318px" %)**Response**
628 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)OK
629 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)While Error in format, return(((
630 +AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
681 681  )))
682 682  
633 +(% style="display:none" %) (%%)
634 +
683 683  = 7. LoRaWAN network management =
684 684  
685 -
686 686  == 7.1 Adaptive Data Rate ==
687 687  
688 688  
... ... @@ -691,14 +691,13 @@
691 691  
692 692  (% style="color:blue" %)**AT Command: AT+ADR**
693 693  
694 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
695 -|=(% colspan="3" style="width: 680px;" %)AT+ADR
696 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
697 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
645 +(% border="1" style="width:643px" %)
646 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:266px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:209px" %)**Response**
647 +|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:209px" %)1(((
698 698  OK
699 699  )))
700 -|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK
701 -|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((
650 +|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)OK
651 +|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)While Error in format, return(((
702 702  AT_PARAM_ERROR
703 703  )))
704 704  
... ... @@ -706,9 +706,10 @@
706 706  
707 707  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
708 708  
709 -* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
710 -* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
659 +* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
660 +* **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
711 711  
662 +(% style="display:none" %) (%%)
712 712  
713 713  == 7.2 LoRa® Class ==
714 714  
... ... @@ -716,11 +716,10 @@
716 716  Feature: Get or Set the Device Class(Currently only support class A, class C).
717 717  
718 718  
719 -(% style="color:blue" %)**AT Command:AT+CLASS**
670 +(% style="color:blue" %)**AT Command:  AT+CLASS**
720 720  
721 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
722 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS
723 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
672 +(% border="1" style="background-color:#f2f2f2; width:507.222px" %)
673 +|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:166px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:175px" %)**Response**
724 724  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
725 725  OK
726 726  )))
... ... @@ -728,17 +728,23 @@
728 728  
729 729  )))
730 730  
681 +(% style="display:none" %)
682 +
683 +(% style="color:red" %)**Notice:**
684 +
685 +* Run AT+FDR before running AT+CLASS=C
686 +* After change to Class=C, Before OTAA Join Successfule, the end node will still shows to use CLASS=A for OTAA Joined. It will use CLASS=C after OTAA Join Succeccful.
687 +
731 731  == 7.3 Duty Cycle Setting ==
732 732  
733 733  
734 -Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
691 +Feature: Get or Set the ETSI Duty Cycle setting** : 0**=disable, **1**=enable - Only for testing.
735 735  
736 736  
737 -(% style="color:blue" %)**AT Command:AT+DCS**
694 +(% style="color:blue" %)**AT Command:  AT+DCS**
738 738  
739 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
740 -|=(% colspan="3" style="width: 512px;" %)AT+DCS
741 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
696 +(% border="1" style="background-color:#f2f2f2; width:515.222px" %)
697 +|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
742 742  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
743 743  OK
744 744  )))
... ... @@ -746,17 +746,23 @@
746 746  
747 747  )))
748 748  
705 +(% style="display:none" %) (%%)
706 +
749 749  == 7.4 Data Rate ==
750 750  
751 751  
752 -Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
710 +Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
753 753  
712 +(% style="color:red" %)
713 +**Notice:**
754 754  
715 +* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
716 +* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
717 +
755 755  (% style="color:blue" %)**AT Command: AT+DR**
756 756  
757 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
758 -|=(% colspan="3" style="width: 463px;" %)AT+DR
759 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
720 +(% border="1" style="background-color:#f2f2f2; width:466.222px" %)
721 +|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:167px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:140px" %)**Response**
760 760  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
761 761  OK
762 762  )))
... ... @@ -768,9 +768,10 @@
768 768  
769 769  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
770 770  
771 -* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
772 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
733 +* **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
734 +* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
773 773  
736 +(% style="display:none" %) (%%)
774 774  
775 775  == 7.5 Frame Counter Downlink ==
776 776  
... ... @@ -778,11 +778,10 @@
778 778  Feature: Get or Set the Frame Counter Downlink.
779 779  
780 780  
781 -(% style="color:blue" %)**AT Command:AT+FCD**
744 +(% style="color:blue" %)**AT Command:  AT+FCD**
782 782  
783 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
784 -|=(% colspan="3" style="width: 690px;" %)AT+FCD
785 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
746 +(% border="1" style="background-color:#f2f2f2; width:693.222px" %)
747 +|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:258px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:269px" %)**Response**
786 786  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
787 787  OK
788 788  )))
... ... @@ -790,16 +790,17 @@
790 790  OK
791 791  )))
792 792  
755 +(% style="display:none" %) (%%)
756 +
793 793  == 7.6 Frame Counter Uplink ==
794 794  
795 795  Feature: Get or Set the Frame Counter Uplink.
796 796  
797 797  
798 -(% style="color:blue" %)**AT Command:AT+FCU**
762 +(% style="color:blue" %)**AT Command:  AT+FCU**
799 799  
800 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
801 -|=(% colspan="3" style="width: 531px;" %)AT+FCU
802 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
764 +(% border="1" style="background-color:#f2f2f2; width:534.222px" %)
765 +|(% style="background-color:#4f81bd; color:white; width:177px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
803 803  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
804 804  OK
805 805  )))
... ... @@ -807,6 +807,8 @@
807 807  
808 808  )))
809 809  
773 +(% style="display:none" %) (%%)
774 +
810 810  == 7.7 Join Accept Delay1 ==
811 811  
812 812  
... ... @@ -813,11 +813,10 @@
813 813  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
814 814  
815 815  
816 -(% style="color:blue" %)**AT Command:AT+JN1DL**
781 +(% style="color:blue" %)**AT Command:  AT+JN1DL**
817 817  
818 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
819 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
820 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
783 +(% border="1" style="background-color:#f2f2f2; width:537.222px" %)
784 +|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:229px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:140px" %)**Response**
821 821  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
822 822  OK
823 823  )))
... ... @@ -825,16 +825,18 @@
825 825  
826 826  )))
827 827  
792 +(% style="display:none" %) (%%)
793 +
828 828  == 7.8 Join Accept Delay2 ==
829 829  
796 +
830 830  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
831 831  
832 832  
833 -(% style="color:blue" %)**AT Command:AT+JN2DL**
800 +(% style="color:blue" %)**AT Command:  AT+JN2DL**
834 834  
835 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
836 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
837 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
802 +(% border="1" style="background-color:#f2f2f2; width:538.222px" %)
803 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:228px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:146px" %)**Response**
838 838  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
839 839  OK
840 840  )))
... ... @@ -842,19 +842,20 @@
842 842  
843 843  )))
844 844  
811 +(% style="display:none" %) (%%)
812 +
845 845  == 7.9 Public Network Mode ==
846 846  
847 847  
848 848  Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
849 849  
850 -(% style="color:red" %)Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
818 +(% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
851 851  
852 852  
853 -(% style="color:blue" %)**AT Command:AT+PNM**
821 +(% style="color:blue" %)**AT Command:  AT+PNM**
854 854  
855 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
856 -|=(% colspan="3" style="width: 664px;" %)AT+PNM
857 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
823 +(% border="1" style="background-color:#f2f2f2; width:667.222px" %)
824 +|(% style="background-color:#4f81bd; color:white; width:166px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:225px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Response**
858 858  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
859 859  OK
860 860  )))
... ... @@ -869,6 +869,8 @@
869 869  )))
870 870  |(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
871 871  
839 +(% style="display:none" %) (%%)
840 +
872 872  == 7.10 Receive Delay1 ==
873 873  
874 874  
... ... @@ -875,11 +875,10 @@
875 875  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
876 876  
877 877  
878 -(% style="color:blue" %)**AT Command:AT+RX1DL**
847 +(% style="color:blue" %)**AT Command: AT+RX1DL**
879 879  
880 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
881 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
882 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
849 +(% border="1" style="background-color:#f2f2f2; width:408.222px" %)
850 +|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:122px" %)**Response**
883 883  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
884 884  OK
885 885  )))
... ... @@ -887,6 +887,7 @@
887 887  
888 888  )))
889 889  
858 +(% style="display:none" %) (%%)
890 890  
891 891  == 7.11 Receive Delay2 ==
892 892  
... ... @@ -894,11 +894,10 @@
894 894  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
895 895  
896 896  
897 -(% style="color:blue" %)**AT Command:AT+RX2DL**
866 +(% style="color:blue" %)**AT Command: AT+RX2DL**
898 898  
899 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
900 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
901 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
868 +(% border="1" style="background-color:#f2f2f2; width:481.222px" %)
869 +|(% style="background-color:#4f81bd; color:white; width:175px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:152px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:150px" %)**Response**
902 902  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
903 903  OK
904 904  )))
... ... @@ -906,6 +906,7 @@
906 906  
907 907  )))
908 908  
877 +(% style="display:none" %) (%%)
909 909  
910 910  == 7.12 Rx2 Window Data Rate ==
911 911  
... ... @@ -913,11 +913,10 @@
913 913  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
914 914  
915 915  
916 -(% style="color:blue" %)**AT Command:AT+RX2DR**
885 +(% style="color:blue" %)**AT Command:  AT+RX2DR**
917 917  
918 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
919 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
920 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
887 +(% border="1" style="background-color:#f2f2f2; width:525.222px" %)
888 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:232px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:130px" %)**Response**
921 921  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
922 922  OK
923 923  )))
... ... @@ -925,6 +925,7 @@
925 925  
926 926  )))
927 927  
896 +(% style="display:none" %) (%%)
928 928  
929 929  == 7.13 Rx2 Window Frequency ==
930 930  
... ... @@ -932,11 +932,10 @@
932 932  Feature: Get or Set the Rx2 window frequency
933 933  
934 934  
935 -(% style="color:blue" %)**AT Command:AT+RX2FQ**
904 +(% style="color:blue" %)**AT Command:  AT+RX2FQ**
936 936  
937 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
938 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
939 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
906 +(% border="1" style="background-color:#f2f2f2; width:587.222px" %)
907 +|(% style="background-color:#4f81bd; color:white; width:183px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:240px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:160px" %)**Response**
940 940  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
941 941  OK
942 942  )))
... ... @@ -944,6 +944,7 @@
944 944  
945 945  )))
946 946  
915 +(% style="display:none" %) (%%)
947 947  
948 948  == 7.14 Transmit Power ==
949 949  
... ... @@ -950,12 +950,13 @@
950 950  
951 951  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
952 952  
922 +(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
953 953  
954 -(% style="color:blue" %)**AT Command:AT+TXP**
955 955  
956 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
957 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
958 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
925 +(% style="color:blue" %)**AT Command:  AT+TXP**
926 +
927 +(% border="1" style="background-color:#f2f2f2; width:465.222px" %)
928 +|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:189px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:112px" %)**Response**
959 959  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
960 960  OK
961 961  )))
... ... @@ -967,11 +967,11 @@
967 967  
968 968  If the downlink payload=22000100, it means setting the TXP to 0.
969 969  
970 -* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
971 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
940 +* **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
941 +* **Example 2**: Downlink Payload: **22000000**  ~/~/ Set AT+TXP=0.
972 972  
943 +(% style="display:none" %) (%%)
973 973  
974 -
975 975  == 7.15 RSSI of the Last Received Packet ==
976 976  
977 977  
... ... @@ -980,13 +980,13 @@
980 980  
981 981  (% style="color:blue" %)**AT Command:AT+RSSI**
982 982  
983 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
984 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
985 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
953 +(% border="1" style="background-color:#f2f2f2; width:557.222px" %)
954 +|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:289px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
986 986  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
987 987  OK
988 988  )))
989 989  
959 +(% style="display:none" %) (%%)
990 990  
991 991  == 7.16 SNR of the Last Received Packet ==
992 992  
... ... @@ -994,15 +994,15 @@
994 994  Feature: Get the SNR of the last received packet
995 995  
996 996  
997 -(% style="color:blue" %)**AT Command:AT+SNR**
967 +(% style="color:blue" %)**AT Command:  AT+SNR**
998 998  
999 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
1000 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
1001 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
969 +(% border="1" style="background-color:#f2f2f2; width:571.222px" %)
970 +|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:290px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
1002 1002  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
1003 1003  OK
1004 1004  )))
1005 1005  
975 +(% style="display:none" %) (%%)
1006 1006  
1007 1007  == 7.17 Application Port ==
1008 1008  
... ... @@ -1012,9 +1012,8 @@
1012 1012  
1013 1013  (% style="color:blue" %)**AT Command: AT+PORT**
1014 1014  
1015 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
1016 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
1017 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
985 +(% border="1" style="background-color:#f2f2f2; width:500.222px" %)
986 +|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:204px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:135px" %)**Response**
1018 1018  |(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
1019 1019  OK
1020 1020  )))
... ... @@ -1026,11 +1026,11 @@
1026 1026  
1027 1027  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
1028 1028  
1029 -* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
1030 -* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
998 +* **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
999 +* **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1031 1031  
1001 +(% style="display:none" %) (%%)
1032 1032  
1033 -
1034 1034  == 7.18 Single Channel Mode ==
1035 1035  
1036 1036  
... ... @@ -1039,25 +1039,25 @@
1039 1039  
1040 1040  (% style="color:blue" %)**AT Command: AT+CHS**
1041 1041  
1042 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
1043 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
1044 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
1011 +(% border="1" style="background-color:#f2f2f2; width:603.222px" %)
1012 +|(% style="background-color:#4f81bd; color:white; width:182px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:122px" %)**Response**
1045 1045  |(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
1046 1046  OK
1047 1047  )))
1048 1048  |(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
1049 1049  
1018 +(% style="display:none" %) (%%)
1050 1050  
1051 1051  == 7.19 Eight Channel Mode ==
1052 1052  
1022 +
1053 1053  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1054 1054  
1055 1055  
1056 1056  (% style="color:blue" %)**AT Command: AT+CHE**
1057 1057  
1058 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1059 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
1060 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1028 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
1029 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
1061 1061  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
1062 1062  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
1063 1063  
... ... @@ -1065,17 +1065,17 @@
1065 1065  )))
1066 1066  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1067 1067  
1068 -(% style="color:blue" %)**Downlink Command: 0x24**
1037 +(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
1069 1069  
1070 1070  Format: Command Code (0x24) followed by 1 bytes channel value.
1071 1071  
1072 1072  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1073 1073  
1074 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1075 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
1043 +* **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1044 +* **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1076 1076  
1046 +(% style="display:none" %) (%%)
1077 1077  
1078 -
1079 1079  == 7.20 Get or Set RXwindows1 timeout ==
1080 1080  
1081 1081  
... ... @@ -1084,31 +1084,26 @@
1084 1084  
1085 1085  (% style="color:blue" %)**AT Command: AT+RX1WTO**
1086 1086  
1087 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1088 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1089 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1056 +(% border="1" style="background-color:#f2f2f2; width:460.222px" %)
1057 +|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:201px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:93px" %)**Response**
1090 1090  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
1091 1091  OK
1092 1092  )))
1093 1093  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1094 1094  
1095 -(((
1096 -
1063 +(% style="display:none" %) (%%)
1097 1097  
1098 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1099 -
1100 -
1065 +(((
1066 +(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1101 1101  )))
1102 1102  
1103 1103  [[image:image-20220526162535-1.png]]
1104 1104  
1105 -
1106 1106  (((
1107 1107  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1108 -
1109 -
1110 1110  )))
1111 1111  
1075 +
1112 1112  == 7.21 Get or Set RXwindows2 timeout ==
1113 1113  
1114 1114  
... ... @@ -1117,14 +1117,14 @@
1117 1117  
1118 1118  (% style="color:blue" %)**AT Command: AT+RX2WTO**
1119 1119  
1120 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1121 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1122 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1084 +(% border="1" style="background-color:#f2f2f2; width:497.222px" %)
1085 +|(% style="background-color:#4f81bd; color:white; width:190px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:199px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
1123 1123  |(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
1124 1124  OK
1125 1125  )))
1126 1126  |(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1127 1127  
1091 +(% style="display:none" %) (%%)
1128 1128  
1129 1129  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1130 1130  
... ... @@ -1134,9 +1134,8 @@
1134 1134  
1135 1135  (% style="color:blue" %)**AT Command: AT+DWELLT**
1136 1136  
1137 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1138 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1139 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1101 +(% border="1" style="background-color:#f2f2f2; width:497.222px" %)
1102 +|(% style="background-color:#4f81bd; color:white; width:183px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:179px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:131px" %)**Response**
1140 1140  |(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
1141 1141  OK
1142 1142  )))
... ... @@ -1148,11 +1148,11 @@
1148 1148  
1149 1149  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1150 1150  
1151 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1152 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1114 +* **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1115 +* **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1153 1153  
1117 +(% style="display:none" %) (%%)
1154 1154  
1155 -
1156 1156  == 7.23 Set Packet Receiving Response Level ==
1157 1157  
1158 1158  
... ... @@ -1159,7 +1159,7 @@
1159 1159  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1160 1160  
1161 1161  
1162 -RPL value:
1125 +(% style="color:blue" %)**RPL value:**
1163 1163  
1164 1164  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1165 1165  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
... ... @@ -1167,19 +1167,16 @@
1167 1167  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1168 1168  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1169 1169  
1133 +(% style="color:blue" %)**Case Analyes:**
1170 1170  
1171 -Case Analyes:
1172 -
1173 1173  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1174 1174  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1175 1175  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1176 1176  
1177 -
1178 1178  (% style="color:blue" %)**AT Command: AT+RPL**
1179 1179  
1180 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1181 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1182 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1141 +(% border="1" style="background-color:#f2f2f2; width:536.222px" %)
1142 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:263px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:109px" %)**Response**
1183 1183  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
1184 1184  OK
1185 1185  )))
... ... @@ -1191,23 +1191,26 @@
1191 1191  
1192 1192  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1193 1193  
1194 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1195 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1154 +* **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1155 +* **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1196 1196  
1157 +(% style="display:none" %) (%%)
1197 1197  
1198 -
1199 1199  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1200 1200  
1201 1201  
1202 1202  (% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1203 1203  
1204 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1205 -|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1206 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1207 -|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1164 +(% border="1" style="background-color:#f2f2f2; width:589px" %)
1165 +|(% style="background-color:#4f81bd; color:white; width:227px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:300px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:87px" %)**Response**
1166 +|(% style="width:227px" %)AT+SETMAXNBTRANS=1，0|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1208 1208  OK
1209 1209  )))
1210 -|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1169 +|(% style="width:227px" %)AT+SETMAXNBTRANS=？，1|(% style="width:300px" %)(((
1170 +value2: 0: uplink fcnt doesn't change for each NBTrans;
1171 +
1172 +1: uplink fcnt increase by 1 for each NBTrans.
1173 +)))|(% style="width:87px" %)(((
1211 1211  1
1212 1212  
1213 1213  OK
... ... @@ -1219,19 +1219,23 @@
1219 1219  
1220 1220  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1221 1221  
1222 -* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1223 -* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1185 +* Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1186 +* Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1224 1224  
1188 +(% style="display:none" %) (%%)
1225 1225  
1226 -
1227 1227  == 7.25 Device offline rejoining （LWS007) ==
1228 1228  
1229 1229  
1230 1230  (% style="color:blue" %)**AT Command: AT+DDETECT**
1231 1231  
1232 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1233 -|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1234 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1195 +AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
1196 +
1197 +* ACK_Timout_1: Unit: min
1198 +* ACK_Timout_2: Unit: min
1199 +
1200 +(% border="1" style="background-color:#f2f2f2; width:710.222px" %)
1201 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
1235 1235  |(% style="width:160px" %)(((
1236 1236  AT+DDETECT=1,1440,2880
1237 1237  
... ... @@ -1260,33 +1260,36 @@
1260 1260  OK
1261 1261  )))
1262 1262  
1263 -(% style="color:blue" %)**Downlink Command: 0x33**
1230 +(% style="color:blue" %)**Downlink Command: 0x32**
1264 1264  
1265 1265  Format: Command Code (0x32) followed by 2 bytes mode value.
1266 1266  
1267 -If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1234 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1268 1268  
1269 -* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1236 +* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1237 +** 0x01 : Flag
1238 +** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1239 +** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
1240 +** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1270 1270  
1242 +(% style="display:none" %) (%%)
1271 1271  
1272 -
1273 1273  == 7.26 Request the server to send an ACK ==
1274 1274  
1275 1275  
1276 1276  (% style="color:blue" %)**AT Command: AT+PNACKMD**
1277 1277  
1278 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1279 -|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1280 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1281 -|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1249 +(% border="1" style="background-color:#f2f2f2; width:536.222px" %)
1250 +|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:263px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:109px" %)**Response**
1251 +|(% style="width:160px" %)AT+PNACKMD=1|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1282 1282  OK
1283 1283  )))
1284 -|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1254 +|(% style="width:160px" %)AT+PNACKMD=0|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1285 1285  0
1286 -
1287 1287  OK
1288 1288  )))
1289 1289  
1259 +(% style="display:none" %) (%%)
1290 1290  
1291 1291  == 7.27 Adjust network rejoining interval ==
1292 1292  
... ... @@ -1293,16 +1293,15 @@
1293 1293  
1294 1294  (% style="color:blue" %)**AT Command: AT+RJTDC**
1295 1295  
1296 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1297 -|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1298 -|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1299 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1266 +(% border="1" style="background-color:#f2f2f2; width:727.222px" %)
1267 +|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:329px" %)**Response**
1268 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1300 1300  OK
1301 1301  
1302 -the interval is 30000ms = 30s
1271 +the interval is 30 min
1303 1303  )))
1304 -|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1305 -Set the ReJoin data transmission interval to 60000ms = 60 seconds
1273 +|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1274 +Set the ReJoin data transmission interval to 60 min
1306 1306  )))
1307 1307  
1308 1308  (% style="color:blue" %)**Downlink Command: 0x26**
... ... @@ -1311,21 +1311,21 @@
1311 1311  
1312 1312  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1313 1313  
1314 -* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1315 -* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1283 +* **Example 1:** Downlink Payload: 26000A  ~/~/  Set AT+RJTDC=10
1284 +* **Example 2: **Downlink Payload: 260002  ~/~/  Set AT+RJTDC=2
1316 1316  
1286 +(% style="display:none" %) (%%)
1317 1317  
1318 -
1319 1319  = 8. AT Commands Combination =
1320 1320  
1321 -
1322 1322  == 8.1 Set a fix RX2DR for downlink window ==
1323 1323  
1324 1324  
1325 -* **AT+ADR=0             ** **~-~->**  Disable ADR first
1326 -* **AT+RX2DR=xxxx**  **~-~->**  Set xxxx to your wanted DataRate
1293 +* (% style="color:blue" %)**AT+ADR=0             **(%%) **~/~/**  Disable ADR first
1327 1327  
1295 +* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~/~/**  Set xxxx to your wanted DataRate
1328 1328  
1297 +(% style="display:none" %) (%%)
1329 1329  
1330 1330  == 8.2 Use Downlink Command to set a fix uplink DR ==
1331 1331  
... ... @@ -1334,6 +1334,10 @@
1334 1334  
1335 1335  **Same as:**
1336 1336  
1337 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1338 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1339 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1306 +* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1307 +
1308 +* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1309 +
1310 +* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1311 +
1312 +

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0