Last modified by kai on 2024/09/06 10:00
<
From version < 51.11 >
edited by Xiaoling
on 2022/07/13 14:13
To version < 14.1 >
edited by Xiaoling
on 2022/05/11 12:00
>
Change comment: Uploaded new attachment "image-20220511120050-1.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -1,122 +1,54 @@
1 - **Table of** **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 -
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 12  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
13 13  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 -(((
16 16  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17 17  
18 -)))
19 19  
20 20  = 2. How to use AT Commands or Downlink command =
21 21  
22 -
23 23  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 24  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
25 -** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
27 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
28 28  
29 -
30 -
31 -
32 32  = 3. Support End Node and firmware version =
33 33  
34 -
35 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
36 -|=(% colspan="3" style="width: 963px;" %)(((
37 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
38 -)))
39 -|(% style="width:187px" %)(((
40 -**Model**
41 -)))|(% style="width:330px" %)(((
42 -**Description**
43 -)))|(% style="width:445px" %)(((
44 -**Firmware Version <~-~-> Stack Version**
45 -)))
46 -|(% style="width:187px" %)(((
47 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
48 -)))|(% style="width:330px" %)(((
49 -Open Source Generic LoRaWAN Sensor Node
50 -)))|(% style="width:445px" %)(((
51 -(((
52 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
53 -)))
54 -
55 -(((
56 -(((
26 +(% border="1" style="background-color:#ffffcc; border:1; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
57 57  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
58 58  )))
59 -)))
60 -)))
61 -|(% style="width:187px" %)(((
62 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
63 -)))|(% style="width:330px" %)(((
64 -LoRaWAN GPS Tracker
65 -)))|(% style="width:445px" %)(((
66 -(((
67 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
68 -)))
69 -
70 -(((
71 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
72 72  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
73 73  )))
74 -)))
75 -)))
76 -|(% style="width:187px" %)(((
77 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
78 -)))|(% style="width:330px" %)(((
79 -LoRaWAN BLE Indoor Tracker
80 -)))|(% style="width:445px" %)(((
81 -LBT1 v1.0 <~-~-> DR-LWS-005;
82 -)))
83 -|(% style="width:187px" %)(((
84 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
85 -)))|(% style="width:330px" %)(((
86 -LoRaWAN RS485 Modbus Converter
87 -)))|(% style="width:445px" %)(((
88 -RS485-LN v1.3 <~-~-> DR-LWS-005;
89 -)))
90 -|(% style="width:187px" %)(((
91 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
92 -)))|(% style="width:330px" %)(((
93 -LoRaWAN Temperature & Humidity Sensor
94 -)))|(% style="width:445px" %)(((
95 -(((
96 -LHT65 v1.7 <~-~-> DR-LWS-003;
97 -)))
98 -
99 -(((
100 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
101 101  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
102 102  )))
103 -)))
104 -)))
105 105  
106 -
107 -
108 -
109 109  = 4. System Management Commands =
110 110  
111 -
112 112  == 4.1 Change Uplink Interval ==
113 113  
114 -
115 115  Feature: Change LoRaWAN End Node Transmit Interval.
116 116  
47 +(% class="box infomessage" %)
48 +(((
49 +**AT Command: AT+TDC**
50 +)))
117 117  
118 -(% style="color:blue" %)**AT Command: AT+TDC**
119 -
120 120  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
121 121  |=(% colspan="3" style="width: 724px;" %)AT+TDC
122 122  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
... ... @@ -129,33 +129,26 @@
129 129  Set transmit interval to 60000ms = 60 seconds
130 130  )))
131 131  
132 -(((
133 -
64 +{{info}}
65 +**Downlink Command: 0x01**
66 +{{/info}}
134 134  
135 -(% style="color:blue" %)**Downlink Command: 0x01**
136 -
137 137  Format: Command Code (0x01) followed by 3 bytes time value.
138 -)))
139 139  
140 -(((
141 141  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
142 -)))
143 143  
144 144  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
145 145  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
146 146  
147 -
148 -
149 -
150 150  == 4.2 Reboot End Node ==
151 151  
152 -
153 153  Feature: Reboot End Node to perform a new OTAA or ABP Join.
154 154  
79 +{{info}}
80 +**AT Command: ATZ**
81 +{{/info}}
155 155  
156 -(% style="color:blue" %)**AT Command: ATZ**
157 -
158 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
159 159  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
160 160  |**Command Example**|**Function**|**Response**
161 161  |ATZ|Reset MCU|(((
... ... @@ -172,27 +172,23 @@
172 172  <followed by the Tx and Rx information>
173 173  )))
174 174  
175 -(% style="color:blue" %)**Downlink Command: 0x04**
100 +{{info}}
101 +**Downlink Command: 0x04**
102 +{{/info}}
176 176  
177 -(((
178 178  Format: Command Code (0x04) followed by FF.
179 -)))
180 180  
181 -(((
182 182  If the downlink payload=**04FF**, the end node will reboot.
183 183  
184 -
185 -)))
186 -
187 187  == 4.3 Reset to factory Default ==
188 188  
189 -
190 190  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
191 191  
112 +{{info}}
113 +**AT Command: AT+FDR**
114 +{{/info}}
192 192  
193 -(% style="color:blue" %)**AT Command: AT+FDR**
194 -
195 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
196 196  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
197 197  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
198 198  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -209,60 +209,47 @@
209 209  Please set the parameters or reset Device to apply change
210 210  )))
211 211  
212 -(% style="color:blue" %)**Downlink Command: 0x04**
133 +{{info}}
134 +**Downlink Command: 0x04**
135 +{{/info}}
213 213  
214 -(((
215 215  Format: Command Code (0x04) followed by FE.
216 -)))
217 217  
218 -(((
219 219  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
220 -)))
221 221  
222 222  
223 223  == 4.4 Show Firmware Version ==
224 224  
225 -
226 226  Feature: Show firmware version. No downlink command yet.
227 227  
146 +{{info}}
147 +**AT Command: AT+VER**
148 +{{/info}}
228 228  
229 -(% style="color:blue" %)**AT Command: AT+VER**
230 -
231 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
232 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
233 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
234 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
235 235  1.3 EU868
236 236  
237 237  OK
238 238  )))
239 239  
240 -(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
159 +{{info}}
160 +**Downlink Command: 0x26 (Valid in 006 stack)**
161 +{{/info}}
241 241  
242 -(((
243 243  Downlink Format: 0x26
244 -)))
245 245  
246 -(((
247 247  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
248 -)))
249 249  
250 -(((
251 -
252 -
253 -
254 254  **xx: Software Type:**
255 -)))
256 256  
257 257  * 0x00 01: LGT92 Version
258 258  * 0x00 02: LBT1
259 259  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
260 260  
261 -(((
262 -
263 -
264 264  **yy: Frequency Band:**
265 -)))
266 266  
267 267  * 0x01: EU868
268 268  * 0x02: US915
... ... @@ -275,11 +275,7 @@
275 275  * 0x09: AS923-2
276 276  * 0xa0: AS923-3
277 277  
278 -(((
279 -
280 -
281 281  **zz: Subband**
282 -)))
283 283  
284 284  firmware version: v1.1.0 ~-~-> 110
285 285  
... ... @@ -286,13 +286,13 @@
286 286  
287 287  == 4.5 Show System Configure ==
288 288  
289 -
290 290  Feature: Show All configure. No downlink command yet.
291 291  
195 +{{info}}
196 +**AT Command: AT+CFG**
197 +{{/info}}
292 292  
293 -(% style="color:blue" %)**AT Command: AT+CFG**
294 -
295 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
296 296  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
297 297  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
298 298  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -309,20 +309,17 @@
309 309  OK
310 310  )))
311 311  
312 -
313 -
314 314  = 5. Keys, IDs and EUIs management =
315 315  
316 -
317 317  == 5.1 Application EUI ==
318 318  
319 -
320 320  Feature: Get or Set the Application EUI.
321 321  
222 +{{info}}
223 +**AT Command: AT+APPEUI**
224 +{{/info}}
322 322  
323 -(% style="color:blue" %)**AT Command: AT+APPEUI**
324 -
325 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
326 326  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
327 327  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
328 328  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -330,17 +330,15 @@
330 330  )))
331 331  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
332 332  
333 -
334 -
335 335  == 5.2 Application Key ==
336 336  
337 -
338 338  Feature: Get or Set the Application Key.
339 339  
238 +{{info}}
239 +**AT Command: AT+APPKEY**
240 +{{/info}}
340 340  
341 -(% style="color:blue" %)**AT Command: AT+APPKEY**
342 -
343 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
344 344  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
345 345  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
346 346  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -348,17 +348,15 @@
348 348  )))
349 349  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
350 350  
351 -
352 -
353 353  == 5.3 Application Session Key ==
354 354  
355 -
356 356  Feature: Get or Set the Application Session Key.
357 357  
254 +{{info}}
255 +**AT Command: AT+APPSKEY**
256 +{{/info}}
358 358  
359 -(% style="color:blue" %)**AT Command: AT+APPSKEY**
360 -
361 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
362 362  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
363 363  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
364 364  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -368,17 +368,15 @@
368 368  OK
369 369  )))
370 370  
371 -
372 -
373 373  == 5.4 Device Address ==
374 374  
375 -
376 376  Feature: Get or Set the Device Address.
377 377  
272 +{{info}}
273 +**AT Command: AT+DADDR**
274 +{{/info}}
378 378  
379 -(% style="color:blue" %)**AT Command: AT+DADDR**
380 -
381 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
382 382  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
383 383  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
384 384  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -388,17 +388,15 @@
388 388  )))
389 389  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
390 390  
391 -
392 -
393 393  == 5.5 Device EUI ==
394 394  
395 -
396 396  Feature: Get or Set the Device EUI.
397 397  
290 +{{info}}
291 +**AT Command: AT+DEUI**
292 +{{/info}}
398 398  
399 -(% style="color:blue" %)**AT Command: AT+DEUI**
400 -
401 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
402 402  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
403 403  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
404 404  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -408,17 +408,15 @@
408 408  OK
409 409  )))
410 410  
411 -
412 -
413 413  == 5.6 Network ID ==
414 414  
415 -
416 416  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
417 417  
308 +{{info}}
309 +**AT Command: AT+NWKID**
310 +{{/info}}
418 418  
419 -(% style="color:blue" %)**AT Command: AT+NWKID**
420 -
421 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
422 422  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
423 423  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
424 424  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -426,17 +426,15 @@
426 426  )))
427 427  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
428 428  
429 -
430 -
431 431  == 5.7 Network Session Key ==
432 432  
433 -
434 434  Feature: Get or Set the Network Session Key
435 435  
324 +{{info}}
325 +**AT Command: AT+NWKSKEY**
326 +{{/info}}
436 436  
437 -(% style="color:blue" %)**AT Command: AT+NWKSKEY**
438 -
439 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
440 440  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
441 441  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
442 442  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -444,23 +444,17 @@
444 444  )))
445 445  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
446 446  
447 -
448 -
449 449  = 6. Joining and sending date on LoRaWAN network =
450 450  
451 -
452 452  == 6.1 Confirm Mode ==
453 453  
454 -
455 -=== 6.1.1  AT+CFM command before DR-LWS007 software stack ===
456 -
457 -
458 458  Feature: Get or Set the confirmation mode (0-1).
459 459  
342 +{{info}}
343 +**AT Command: AT+CFM**
344 +{{/info}}
460 460  
461 -(% style="color:blue" %)**AT Command: AT+CFM**
462 -
463 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
464 464  |=(% colspan="3" style="width: 707px;" %)AT+CFM
465 465  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
466 466  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -469,7 +469,7 @@
469 469  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
470 470  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
471 471  
472 -(% style="color:blue" %)**Downlink Command: 0x05**
355 +Downlink Command: 0x05
473 473  
474 474  Format: Command Code (0x05) followed by 2 bytes mode value.
475 475  
... ... @@ -478,66 +478,15 @@
478 478  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
479 479  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
480 480  
481 -
482 -
483 -
484 -=== 6.1.2  AT+CFM command since DR-LWS007 software stack ===
485 -
486 -
487 -(% style="color:blue" %)**AT Command: AT+CFM**
488 -
489 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
490 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
491 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
492 -|(% style="width:160px" %)(((
493 -AT+CFM=1,0,0
494 -
495 -value1
496 -)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
497 -1
498 -
499 -OK
500 -)))
501 -|(% style="width:160px" %)(((
502 -AT+CFM=0,?,0
503 -
504 -value2
505 -)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
506 -0~~7
507 -
508 -OK
509 -)))
510 -|(% style="width:160px" %)(((
511 -AT+CFM=0,0,1
512 -
513 -value3
514 -)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
515 -1
516 -
517 -OK
518 -)))
519 -
520 -(% style="color:blue" %)**Downlink Command: 0x05**
521 -
522 -Format: Command Code (0x05) followed by 2 bytes mode value.
523 -
524 -If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
525 -
526 -* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
527 -* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
528 -
529 -
530 -
531 -
532 532  == 6.2 Confirm Status ==
533 533  
534 -
535 535  Feature: Get confirmation status of the last AT+SEND (0-1).
536 536  
368 +{{info}}
369 +**AT Command: AT+CFS**
370 +{{/info}}
537 537  
538 -(% style="color:blue" %)**AT Command: AT+CFS**
539 -
540 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
541 541  |=(% colspan="3" style="width: 531px;" %)AT+CFS
542 542  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
543 543  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
... ... @@ -544,17 +544,15 @@
544 544  OK
545 545  )))
546 546  
547 -
548 -
549 549  == 6.3 Join LoRa® Network ==
550 550  
551 -
552 552  Feature: Join network.
553 553  
383 +{{info}}
384 +**AT Command: AT+JOIN**
385 +{{/info}}
554 554  
555 -(% style="color:blue" %)**AT Command: AT+JOIN**
556 -
557 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
558 558  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
559 559  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
560 560  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
... ... @@ -563,17 +563,15 @@
563 563  While Error in format, return AT_BUSY_ERROR
564 564  )))
565 565  
566 -
567 -
568 568  == 6.4 LoRa® Network Join Mode ==
569 569  
570 -
571 571  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
572 572  
400 +{{info}}
401 +**AT Command: AT+NJM**
402 +{{/info}}
573 573  
574 -(% style="color:blue" %)**AT Command: AT+NJM**
575 -
576 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
577 577  |=(% colspan="3" style="width: 750px;" %)AT+NJM
578 578  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
579 579  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
... ... @@ -582,27 +582,26 @@
582 582  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
583 583  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
584 584  
585 -(% style="color:blue" %)**Downlink Command: 0x20**
413 +{{info}}
414 +**Downlink Command: 0x20**
415 +{{/info}}
586 586  
587 587  Format: Command Code (0x20) followed by 1 bytes mode value.
588 588  
589 589  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
590 590  
591 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
421 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
592 592  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
593 593  
594 -
595 -
596 -
597 597  == 6.5 LoRa® Network Join Status ==
598 598  
599 -
600 600  Feature: LoRa® Network Join Status.
601 601  
428 +{{info}}
429 +**AT Command: AT+NJS**
430 +{{/info}}
602 602  
603 -(% style="color:blue" %)**AT Command: AT+NJS**
604 -
605 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
606 606  |=(% colspan="3" style="width: 495px;" %)AT+NJS
607 607  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
608 608  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
... ... @@ -609,17 +609,15 @@
609 609  OK
610 610  )))
611 611  
612 -
613 -
614 614  == 6.6 Print Last Received Data in Raw Format ==
615 615  
616 -
617 617  Feature: Print Last Received Data in Raw Format<port:data>.
618 618  
443 +{{info}}
444 +**AT Command: AT+RECV**
445 +{{/info}}
619 619  
620 -(% style="color:blue" %)**AT Command: AT+RECV**
621 -
622 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
623 623  |=(% colspan="3" style="width: 584px;" %)AT+RECV
624 624  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
625 625  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
... ... @@ -628,13 +628,13 @@
628 628  
629 629  == 6.7 Print Last Received Data in Binary Format ==
630 630  
631 -
632 632  Feature: Print Last Received Data in Binary Format<port:data>.
633 633  
458 +{{info}}
459 +**AT Command: AT+RECVB**
460 +{{/info}}
634 634  
635 -(% style="color:blue" %)**AT Command: AT+RECVB**
636 -
637 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
638 638  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
639 639  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
640 640  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
... ... @@ -643,13 +643,13 @@
643 643  
644 644  == 6.8 Send Text Data ==
645 645  
646 -
647 647  Feature: Send Text Data<port:data>.
648 648  
473 +{{info}}
474 +**AT Command: AT+SEND**
475 +{{/info}}
649 649  
650 -(% style="color:blue" %)**AT Command: AT+SEND**
651 -
652 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
653 653  |=(% colspan="3" style="width: 988px;" %)AT+SEND
654 654  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
655 655  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
... ... @@ -662,13 +662,13 @@
662 662  
663 663  == 6.9 Send Hexadecimal Data ==
664 664  
665 -
666 666  Feature: Send hexadecimal data along with the application port.
667 667  
492 +{{info}}
493 +**AT Command: AT+SENDB**
494 +{{/info}}
668 668  
669 -(% style="color:blue" %)**AT Command: AT+SENDB**
670 -
671 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
672 672  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
673 673  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
674 674  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
... ... @@ -680,16 +680,15 @@
680 680  
681 681  = 7. LoRaWAN network management =
682 682  
683 -
684 684  == 7.1 Adaptive Data Rate ==
685 685  
686 -
687 687  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
688 688  
512 +{{info}}
513 +**AT Command: AT+ADR**
514 +{{/info}}
689 689  
690 -(% style="color:blue" %)**AT Command: AT+ADR**
691 -
692 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
693 693  |=(% colspan="3" style="width: 680px;" %)AT+ADR
694 694  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
695 695  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
... ... @@ -700,23 +700,25 @@
700 700  AT_PARAM_ERROR
701 701  )))
702 702  
703 -(% style="color:blue" %)**Downlink Command: 0x22**
527 +{{info}}
528 +**Downlink Command: 0x22**
529 +{{/info}}
704 704  
531 +
705 705  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
706 706  
707 -* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
534 +* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
708 708  * **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
709 709  
710 -
711 711  == 7.2 LoRa® Class ==
712 712  
713 -
714 714  Feature: Get or Set the Device Class(Currently only support class A, class C).
715 715  
541 +{{info}}
542 +**AT Command:AT+CLASS**
543 +{{/info}}
716 716  
717 -(% style="color:blue" %)**AT Command:AT+CLASS**
718 -
719 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
720 720  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
721 721  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
722 722  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
... ... @@ -728,13 +728,13 @@
728 728  
729 729  == 7.3 Duty Cycle Setting ==
730 730  
731 -
732 732  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
733 733  
559 +{{info}}
560 +**AT Command:AT+DCS**
561 +{{/info}}
734 734  
735 -(% style="color:blue" %)**AT Command:AT+DCS**
736 -
737 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
738 738  |=(% colspan="3" style="width: 512px;" %)AT+DCS
739 739  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
740 740  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
... ... @@ -746,13 +746,13 @@
746 746  
747 747  == 7.4 Data Rate ==
748 748  
749 -
750 750  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
751 751  
577 +{{info}}
578 +**AT Command: AT+DR**
579 +{{/info}}
752 752  
753 -(% style="color:blue" %)**AT Command: AT+DR**
754 -
755 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
756 756  |=(% colspan="3" style="width: 463px;" %)AT+DR
757 757  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
758 758  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
... ... @@ -762,23 +762,25 @@
762 762  
763 763  )))
764 764  
765 -(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
591 +{{info}}
592 +**Downlink Command: 0x2200aaFF**
593 +{{/info}}
766 766  
595 +
767 767  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
768 768  
769 769  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
770 770  * **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
771 771  
772 -
773 773  == 7.5 Frame Counter Downlink ==
774 774  
775 -
776 776  Feature: Get or Set the Frame Counter Downlink.
777 777  
605 +{{info}}
606 +**AT Command:AT+FCD**
607 +{{/info}}
778 778  
779 -(% style="color:blue" %)**AT Command:AT+FCD**
780 -
781 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
782 782  |=(% colspan="3" style="width: 690px;" %)AT+FCD
783 783  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
784 784  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
... ... @@ -786,6 +786,8 @@
786 786  )))
787 787  |(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
788 788  OK
617 +
618 +
789 789  )))
790 790  
791 791  == 7.6 Frame Counter Uplink ==
... ... @@ -792,10 +792,11 @@
792 792  
793 793  Feature: Get or Set the Frame Counter Uplink.
794 794  
625 +{{info}}
626 +**AT Command:AT+FCU**
627 +{{/info}}
795 795  
796 -(% style="color:blue" %)**AT Command:AT+FCU**
797 -
798 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
799 799  |=(% colspan="3" style="width: 531px;" %)AT+FCU
800 800  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
801 801  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
... ... @@ -807,13 +807,13 @@
807 807  
808 808  == 7.7 Join Accept Delay1 ==
809 809  
810 -
811 811  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
812 812  
643 +{{info}}
644 +**AT Command:AT+JN1DL**
645 +{{/info}}
813 813  
814 -(% style="color:blue" %)**AT Command:AT+JN1DL**
815 -
816 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
817 817  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
818 818  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
819 819  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
... ... @@ -827,10 +827,11 @@
827 827  
828 828  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
829 829  
661 +{{info}}
662 +**AT Command:AT+JN2DL**
663 +{{/info}}
830 830  
831 -(% style="color:blue" %)**AT Command:AT+JN2DL**
832 -
833 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
834 834  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
835 835  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
836 836  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
... ... @@ -842,40 +842,33 @@
842 842  
843 843  == 7.9 Public Network Mode ==
844 844  
677 +Feature: Get or Set the public network mode. (0: off, 1: on)
845 845  
846 -Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
679 +{{info}}
680 +**AT Command:AT+PNM**
681 +{{/info}}
847 847  
848 -(% style="color:red" %)Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
849 -
850 -
851 -(% style="color:blue" %)**AT Command:AT+PNM**
852 -
853 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
854 854  |=(% colspan="3" style="width: 664px;" %)AT+PNM
855 855  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
856 856  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
857 857  OK
858 858  )))
859 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
860 -Set the public network mode.
861 -
862 -Set syncword=0x34
863 -)))|(% style="width:272px" %)(System will write new value to PNM)(((
689 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
864 864  OK
865 865  
866 866  
867 867  )))
868 -|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
869 869  
870 870  == 7.10 Receive Delay1 ==
871 871  
872 -
873 873  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
874 874  
699 +{{info}}
700 +**AT Command:AT+RX1DL**
701 +{{/info}}
875 875  
876 -(% style="color:blue" %)**AT Command:AT+RX1DL**
877 -
878 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
879 879  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
880 880  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
881 881  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
... ... @@ -885,16 +885,15 @@
885 885  
886 886  )))
887 887  
713 +== 7.11Receive Delay2 ==
888 888  
889 -== 7.11 Receive Delay2 ==
890 -
891 -
892 892  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
893 893  
717 +{{info}}
718 +**AT Command:AT+RX2DL**
719 +{{/info}}
894 894  
895 -(% style="color:blue" %)**AT Command:AT+RX2DL**
896 -
897 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
721 +(% style="background-color:#ffffcc; color:green; width:481.222px" %)
898 898  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
899 899  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
900 900  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
... ... @@ -904,16 +904,15 @@
904 904  
905 905  )))
906 906  
907 -
908 908  == 7.12 Rx2 Window Data Rate ==
909 909  
910 -
911 911  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
912 912  
735 +{{info}}
736 +**AT Command:AT+RX2DR**
737 +{{/info}}
913 913  
914 -(% style="color:blue" %)**AT Command:AT+RX2DR**
915 -
916 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
739 +(% style="background-color:#ffffcc; color:green; width:525.222px" %)
917 917  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
918 918  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
919 919  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
... ... @@ -923,16 +923,15 @@
923 923  
924 924  )))
925 925  
926 -
927 927  == 7.13 Rx2 Window Frequency ==
928 928  
929 -
930 930  Feature: Get or Set the Rx2 window frequency
931 931  
753 +{{info}}
754 +**AT Command:AT+RX2FQ**
755 +{{/info}}
932 932  
933 -(% style="color:blue" %)**AT Command:AT+RX2FQ**
934 -
935 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
757 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
936 936  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
937 937  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
938 938  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
... ... @@ -942,16 +942,15 @@
942 942  
943 943  )))
944 944  
945 -
946 946  == 7.14 Transmit Power ==
947 947  
948 -
949 949  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
950 950  
771 +{{info}}
772 +**AT Command:AT+TXP**
773 +{{/info}}
951 951  
952 -(% style="color:blue" %)**AT Command:AT+TXP**
953 -
954 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
775 +(% style="background-color:#ffffcc; color:green; width:465.222px" %)
955 955  |=(% colspan="3" style="width: 462px;" %)AT+TXP
956 956  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
957 957  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
... ... @@ -968,17 +968,15 @@
968 968  * **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
969 969  * **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
970 970  
971 -
972 -
973 973  == 7.15 RSSI of the Last Received Packet ==
974 974  
975 -
976 976  Feature: Get or Set the Rx2 window frequency
977 977  
796 +{{info}}
797 +**AT Command:AT+RSSI**
798 +{{/info}}
978 978  
979 -(% style="color:blue" %)**AT Command:AT+RSSI**
980 -
981 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
800 +(% style="background-color:#ffffcc; color:green; width:557.222px" %)
982 982  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
983 983  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
984 984  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
... ... @@ -985,16 +985,15 @@
985 985  OK
986 986  )))
987 987  
988 -
989 989  == 7.16 SNR of the Last Received Packet ==
990 990  
991 -
992 992  Feature: Get the SNR of the last received packet
993 993  
811 +{{info}}
812 +**AT Command:AT+SNR**
813 +{{/info}}
994 994  
995 -(% style="color:blue" %)**AT Command:AT+SNR**
996 -
997 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
815 +(% style="background-color:#ffffcc; color:green; width:571.222px" %)
998 998  |=(% colspan="3" style="width: 568px;" %)AT+SNR
999 999  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
1000 1000  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
... ... @@ -1001,16 +1001,15 @@
1001 1001  OK
1002 1002  )))
1003 1003  
1004 -
1005 1005  == 7.17 Application Port ==
1006 1006  
1007 -
1008 1008  Feature: Get or set the application port.
1009 1009  
826 +{{info}}
827 +**AT Command: AT+PORT**
828 +{{/info}}
1010 1010  
1011 -(% style="color:blue" %)**AT Command: AT+PORT**
1012 -
1013 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
830 +(% style="background-color:#ffffcc; color:green; width:500.222px" %)
1014 1014  |=(% colspan="3" style="width: 497px;" %)AT+PORT
1015 1015  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
1016 1016  |(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
... ... @@ -1018,7 +1018,9 @@
1018 1018  )))
1019 1019  |(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
1020 1020  
1021 -(% style="color:blue" %)**Downlink Command: 0x23**
838 +{{info}}
839 +**Downlink Command: 0x23**
840 +{{/info}}
1022 1022  
1023 1023  Format: Command Code (0x23) followed by 1 bytes port value.
1024 1024  
... ... @@ -1027,17 +1027,15 @@
1027 1027  * **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
1028 1028  * **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
1029 1029  
1030 -
1031 -
1032 1032  == 7.18 Single Channel Mode ==
1033 1033  
1034 -
1035 1035  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
1036 1036  
853 +{{info}}
854 +**AT Command: AT+CHS**
855 +{{/info}}
1037 1037  
1038 -(% style="color:blue" %)**AT Command: AT+CHS**
1039 -
1040 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
857 +(% style="background-color:#ffffcc; color:green; width:603.222px" %)
1041 1041  |=(% colspan="3" style="width: 600px;" %)AT+CHS
1042 1042  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
1043 1043  |(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
... ... @@ -1045,15 +1045,15 @@
1045 1045  )))
1046 1046  |(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
1047 1047  
1048 -
1049 1049  == 7.19 Eight Channel Mode ==
1050 1050  
1051 1051  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1052 1052  
869 +{{info}}
870 +**AT Command: AT+CHE**
871 +{{/info}}
1053 1053  
1054 -(% style="color:blue" %)**AT Command: AT+CHE**
1055 -
1056 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
873 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
1057 1057  |=(% colspan="3" style="width: 707px;" %)AT+CHE
1058 1058  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1059 1059  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
... ... @@ -1063,7 +1063,9 @@
1063 1063  )))
1064 1064  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1065 1065  
1066 -(% style="color:blue" %)**Downlink Command: 0x24**
883 +{{info}}
884 +**Downlink Command: 0x24**
885 +{{/info}}
1067 1067  
1068 1068  Format: Command Code (0x24) followed by 1 bytes channel value.
1069 1069  
... ... @@ -1072,17 +1072,15 @@
1072 1072  * **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1073 1073  * **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
1074 1074  
1075 -
1076 -
1077 1077  == 7.20 Get or Set RXwindows1 timeout ==
1078 1078  
896 +Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1079 1079  
1080 -Feature: Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
898 +{{info}}
899 +**AT Command: AT+RX1WTO**
900 +{{/info}}
1081 1081  
1082 -
1083 -(% style="color:blue" %)**AT Command: AT+RX1WTO**
1084 -
1085 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
902 +(% style="background-color:#ffffcc; color:green; width:460.222px" %)
1086 1086  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1087 1087  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1088 1088  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
... ... @@ -1090,32 +1090,21 @@
1090 1090  )))
1091 1091  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1092 1092  
1093 -(((
1094 -
910 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1095 1095  
1096 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
912 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1097 1097  
1098 -
1099 -)))
1100 -
1101 -[[image:image-20220526162535-1.png]]
1102 -
1103 -
1104 -(((
1105 1105  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1106 1106  
1107 -
1108 -)))
1109 -
1110 1110  == 7.21 Get or Set RXwindows2 timeout ==
1111 1111  
918 +Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1112 1112  
1113 -Feature: Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
920 +{{info}}
921 +**AT Command: AT+RX2WTO**
922 +{{/info}}
1114 1114  
1115 -
1116 -(% style="color:blue" %)**AT Command: AT+RX2WTO**
1117 -
1118 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
924 +(% style="background-color:#ffffcc; color:green; width:497.222px" %)
1119 1119  |=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1120 1120  |(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1121 1121  |(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
... ... @@ -1123,16 +1123,15 @@
1123 1123  )))
1124 1124  |(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1125 1125  
1126 -
1127 1127  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1128 1128  
1129 -
1130 1130  Feature: Get or Set uplinkdwelltime
1131 1131  
936 +{{info}}
937 +**AT Command: AT+DWELLT**
938 +{{/info}}
1132 1132  
1133 -(% style="color:blue" %)**AT Command: AT+DWELLT**
1134 -
1135 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
940 +(% style="background-color:#ffffcc; color:green; width:497.222px" %)
1136 1136  |=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1137 1137  |(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1138 1138  |(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
... ... @@ -1140,7 +1140,9 @@
1140 1140  )))
1141 1141  |(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
1142 1142  
1143 -(% style="color:blue" %)**Downlink Command: 0x25**
948 +{{info}}
949 +**Downlink Command: 0x25**
950 +{{/info}}
1144 1144  
1145 1145  Format: Command Code (0x25) followed by 1 bytes state value.
1146 1146  
... ... @@ -1149,14 +1149,10 @@
1149 1149  * **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1150 1150  * **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1151 1151  
1152 -
1153 -
1154 1154  == 7.23 Set Packet Receiving Response Level ==
1155 1155  
1156 -
1157 1157  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1158 1158  
1159 -
1160 1160  RPL value:
1161 1161  
1162 1162  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
... ... @@ -1165,7 +1165,6 @@
1165 1165  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1166 1166  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1167 1167  
1168 -
1169 1169  Case Analyes:
1170 1170  
1171 1171  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
... ... @@ -1172,10 +1172,11 @@
1172 1172  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1173 1173  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1174 1174  
977 +{{info}}
978 +**AT Command: AT+RPL**
979 +{{/info}}
1175 1175  
1176 -(% style="color:blue" %)**AT Command: AT+RPL**
1177 -
1178 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
981 +(% style="background-color:#ffffcc; color:green; width:536.222px" %)
1179 1179  |=(% colspan="3" style="width: 533px;" %)AT+RPL
1180 1180  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1181 1181  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
... ... @@ -1183,7 +1183,9 @@
1183 1183  )))
1184 1184  |(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
1185 1185  
1186 -(% style="color:blue" %)**Downlink Command: 0x21**
989 +{{info}}
990 +**Downlink Command: 0x21**
991 +{{/info}}
1187 1187  
1188 1188  Format: Command Code (0x21) followed by 1 bytes level value.
1189 1189  
... ... @@ -1192,146 +1192,21 @@
1192 1192  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1193 1193  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1194 1194  
1195 -
1196 -
1197 -== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1198 -
1199 -
1200 -(% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1201 -
1202 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1203 -|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1204 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1205 -|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1206 -OK
1207 -)))
1208 -|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1209 -1
1210 -
1211 -OK
1212 -)))
1213 -
1214 -(% style="color:blue" %)**Downlink Command: 0x33**
1215 -
1216 -Format: Command Code (0x33) followed by 2 bytes mode value.
1217 -
1218 -If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1219 -
1220 -* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1221 -* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1222 -
1223 -
1224 -
1225 -== 7.25 Device offline rejoining （LWS007) ==
1226 -
1227 -
1228 -(% style="color:blue" %)**AT Command: AT+DDETECT**
1229 -
1230 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1231 -|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1232 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1233 -|(% style="width:160px" %)(((
1234 -AT+DDETECT=1,1440,2880
1235 -
1236 -value1
1237 -)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1238 -1
1239 -
1240 -OK
1241 -)))
1242 -|(% style="width:160px" %)(((
1243 -AT+DDETECT=1,?,2880
1244 -
1245 -value2
1246 -)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1247 -
1248 -
1249 -OK
1250 -)))
1251 -|(% style="width:160px" %)(((
1252 -AT+DDETECT=1,1440,？
1253 -
1254 -value3
1255 -)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1256 -
1257 -
1258 -OK
1259 -)))
1260 -
1261 -(% style="color:blue" %)**Downlink Command: 0x33**
1262 -
1263 -Format: Command Code (0x32) followed by 2 bytes mode value.
1264 -
1265 -If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1266 -
1267 -* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1268 -
1269 -
1270 -
1271 -== 7.26 Request the server to send an ACK ==
1272 -
1273 -
1274 -(% style="color:blue" %)**AT Command: AT+PNACKMD**
1275 -
1276 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1277 -|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1278 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1279 -|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1280 -OK
1281 -)))
1282 -|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1283 -0
1284 -
1285 -OK
1286 -)))
1287 -
1288 -
1289 -== 7.27 Adjust network rejoining interval ==
1290 -
1291 -
1292 -(% style="color:blue" %)**AT Command: AT+RJTDC**
1293 -
1294 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1295 -|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1296 -|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1297 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1298 -OK
1299 -
1300 -the interval is 30000ms = 30s
1301 -)))
1302 -|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1303 -Set the ReJoin data transmission interval to 60000ms = 60 seconds
1304 -)))
1305 -
1306 -(% style="color:blue" %)**Downlink Command: 0x26**
1307 -
1308 -Format: Command Code (0x26) followed by 2 bytes mode value.
1309 -
1310 -If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1311 -
1312 -* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1313 -* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1314 -
1315 -
1316 -
1317 1317  = 8. AT Commands Combination =
1318 1318  
1319 -
1320 1320  == 8.1 Set a fix RX2DR for downlink window ==
1321 1321  
1004 +* **AT+ADR=0 **~-~-> Disable ADR first
1005 +* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
1322 1322  
1323 -* **AT+ADR=0             ** **~-~->**  Disable ADR first
1324 -* **AT+RX2DR=xxxx**  **~-~->**  Set xxxx to your wanted DataRate
1325 -
1326 -
1327 -
1328 1328  == 8.2 Use Downlink Command to set a fix uplink DR ==
1329 1329  
1009 +{{info}}
1010 +**Downlink Command: 0x22000500**
1011 +{{/info}}
1330 1330  
1331 -(% style="color:blue" %)**Downlink Command: 0x22000500**
1013 +Same as:
1332 1332  
1333 -**Same as:**
1334 -
1335 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1336 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1337 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1015 +* AT+ADR=0 [[Reference>>http://8.211.40.43:8080/xwiki/bin/view/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#Adaptive_Data_Rate]]
1016 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
1017 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0