Last modified by kai on 2024/09/06 10:00
<
From version < 51.1 >
edited by Xiaoling
on 2022/07/13 14:00
To version < 59.2 >
edited by Xiaoling
on 2023/01/29 11:16
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -9,11 +9,12 @@
9 9  
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 -* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
13 -* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
12 +* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 +* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 15  (((
16 16  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17 +
17 17  
18 18  )))
19 19  
... ... @@ -20,13 +20,14 @@
20 20  = 2. How to use AT Commands or Downlink command =
21 21  
22 22  
23 -* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 -* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
24 +* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
25 +* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
25 25  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
27 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
27 27  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
28 28  
29 29  
31 +
30 30  = 3. Support End Node and firmware version =
31 31  
32 32  
... ... @@ -101,9 +101,10 @@
101 101  )))
102 102  )))
103 103  
104 -= 4. System Management Commands =
105 105  
106 106  
108 += 4. System Management Commands =
109 +
107 107  == 4.1 Change Uplink Interval ==
108 108  
109 109  
... ... @@ -133,13 +133,14 @@
133 133  )))
134 134  
135 135  (((
136 -If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
139 +If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
137 137  )))
138 138  
139 -* **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
140 -* **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
142 +* **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
143 +* **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
141 141  
142 142  
146 +
143 143  == 4.2 Reboot End Node ==
144 144  
145 145  
... ... @@ -148,10 +148,10 @@
148 148  
149 149  (% style="color:blue" %)**AT Command: ATZ**
150 150  
151 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
152 -|=(% colspan="3" %)ATZ: Trig a reset of the MCU
153 -|**Command Example**|**Function**|**Response**
154 -|ATZ|Reset MCU|(((
155 +(% border="1" style="background-color:#ffffcc; color:green; width:546px" %)
156 +|=(% colspan="3" style="width: 543px;" %)ATZ: Trig a reset of the MCU
157 +|(% style="width:157px" %)**Command Example**|(% style="width:92px" %)**Function**|(% style="width:294px" %)**Response**
158 +|(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
155 155  Device reset and show booting info
156 156  
157 157  LSN50 Device/LoRa ST Module
... ... @@ -185,10 +185,10 @@
185 185  
186 186  (% style="color:blue" %)**AT Command: AT+FDR**
187 187  
188 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
189 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default
190 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
191 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
192 +(% border="1" style="background-color:#ffffcc; color:green; width:789px" %)
193 +|=(% colspan="3" style="width: 786px;" %)Reset to factory default
194 +|(% style="width:154px" %)**Command Example**|(% style="width:175px" %)**Function**|(% style="width:456px" %)**Response**
195 +|(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
192 192  Device reset to factory default parameters and show booting info
193 193  
194 194  LSN50 Device/LoRa ST Module
... ... @@ -221,10 +221,10 @@
221 221  
222 222  (% style="color:blue" %)**AT Command: AT+VER**
223 223  
224 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
225 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
226 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
227 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
228 +(% border="1" style="background-color:#ffffcc; color:green; width:542px" %)
229 +|=(% colspan="3" style="width: 539px;" %)AT+VER: Image Version and Frequency Band
230 +|(% style="width:157px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:86px" %)**Response**
231 +|(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
228 228  1.3 EU868
229 229  
230 230  OK
... ... @@ -243,7 +243,6 @@
243 243  (((
244 244  
245 245  
246 -
247 247  **xx: Software Type:**
248 248  )))
249 249  
... ... @@ -254,7 +254,6 @@
254 254  (((
255 255  
256 256  
257 -
258 258  **yy: Frequency Band:**
259 259  )))
260 260  
... ... @@ -272,7 +272,6 @@
272 272  (((
273 273  
274 274  
275 -
276 276  **zz: Subband**
277 277  )))
278 278  
... ... @@ -305,9 +305,9 @@
305 305  )))
306 306  
307 307  
309 +
308 308  = 5. Keys, IDs and EUIs management =
309 309  
310 -
311 311  == 5.1 Application EUI ==
312 312  
313 313  
... ... @@ -325,6 +325,7 @@
325 325  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
326 326  
327 327  
329 +
328 328  == 5.2 Application Key ==
329 329  
330 330  
... ... @@ -342,6 +342,7 @@
342 342  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
343 343  
344 344  
347 +
345 345  == 5.3 Application Session Key ==
346 346  
347 347  
... ... @@ -361,6 +361,7 @@
361 361  )))
362 362  
363 363  
367 +
364 364  == 5.4 Device Address ==
365 365  
366 366  
... ... @@ -380,6 +380,7 @@
380 380  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
381 381  
382 382  
387 +
383 383  == 5.5 Device EUI ==
384 384  
385 385  
... ... @@ -399,6 +399,7 @@
399 399  )))
400 400  
401 401  
407 +
402 402  == 5.6 Network ID ==
403 403  
404 404  
... ... @@ -416,6 +416,7 @@
416 416  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
417 417  
418 418  
425 +
419 419  == 5.7 Network Session Key ==
420 420  
421 421  
... ... @@ -433,12 +433,11 @@
433 433  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
434 434  
435 435  
443 +
436 436  = 6. Joining and sending date on LoRaWAN network =
437 437  
438 -
439 439  == 6.1 Confirm Mode ==
440 440  
441 -
442 442  === 6.1.1  AT+CFM command before DR-LWS007 software stack ===
443 443  
444 444  
... ... @@ -462,8 +462,8 @@
462 462  
463 463  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
464 464  
465 -* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
466 -* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
471 +* **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
472 +* **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
467 467  
468 468  
469 469  
... ... @@ -509,8 +509,8 @@
509 509  
510 510  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
511 511  
512 -* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
513 -* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
518 +* **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
519 +* **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
514 514  
515 515  
516 516  
... ... @@ -522,14 +522,15 @@
522 522  
523 523  (% style="color:blue" %)**AT Command: AT+CFS**
524 524  
525 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
526 -|=(% colspan="3" style="width: 531px;" %)AT+CFS
527 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
528 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
531 +(% border="1" style="background-color:#ffffcc; color:green; width:463px" %)
532 +|=(% colspan="3" style="width: 460px;" %)AT+CFS
533 +|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:107px" %)**Response**
534 +|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
529 529  OK
530 530  )))
531 531  
532 532  
539 +
533 533  == 6.3 Join LoRa® Network ==
534 534  
535 535  
... ... @@ -548,6 +548,7 @@
548 548  )))
549 549  
550 550  
558 +
551 551  == 6.4 LoRa® Network Join Mode ==
552 552  
553 553  
... ... @@ -571,8 +571,8 @@
571 571  
572 572  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
573 573  
574 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
575 -* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
582 +* **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
583 +* **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
576 576  
577 577  
578 578  
... ... @@ -592,6 +592,7 @@
592 592  )))
593 593  
594 594  
603 +
595 595  == 6.6 Print Last Received Data in Raw Format ==
596 596  
597 597  
... ... @@ -608,6 +608,7 @@
608 608  )))
609 609  
610 610  
620 +
611 611  == 6.7 Print Last Received Data in Binary Format ==
612 612  
613 613  
... ... @@ -624,6 +624,7 @@
624 624  )))
625 625  
626 626  
637 +
627 627  == 6.8 Send Text Data ==
628 628  
629 629  
... ... @@ -644,6 +644,7 @@
644 644  )))
645 645  
646 646  
658 +
647 647  == 6.9 Send Hexadecimal Data ==
648 648  
649 649  
... ... @@ -652,11 +652,11 @@
652 652  
653 653  (% style="color:blue" %)**AT Command: AT+SENDB**
654 654  
655 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
656 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
657 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
658 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
659 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
667 +(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
668 +|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
669 +|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
670 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
671 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
660 660  AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
661 661  
662 662  
... ... @@ -663,9 +663,9 @@
663 663  )))
664 664  
665 665  
678 +
666 666  = 7. LoRaWAN network management =
667 667  
668 -
669 669  == 7.1 Adaptive Data Rate ==
670 670  
671 671  
... ... @@ -689,8 +689,8 @@
689 689  
690 690  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
691 691  
692 -* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
693 -* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
704 +* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
705 +* **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
694 694  
695 695  
696 696  
... ... @@ -700,7 +700,7 @@
700 700  Feature: Get or Set the Device Class(Currently only support class A, class C).
701 701  
702 702  
703 -(% style="color:blue" %)**AT Command:AT+CLASS**
715 +(% style="color:blue" %)**AT Command:  AT+CLASS**
704 704  
705 705  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
706 706  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
... ... @@ -713,13 +713,14 @@
713 713  )))
714 714  
715 715  
728 +
716 716  == 7.3 Duty Cycle Setting ==
717 717  
718 718  
719 -Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
732 +Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
720 720  
721 721  
722 -(% style="color:blue" %)**AT Command:AT+DCS**
735 +(% style="color:blue" %)**AT Command:  AT+DCS**
723 723  
724 724  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
725 725  |=(% colspan="3" style="width: 512px;" %)AT+DCS
... ... @@ -732,12 +732,18 @@
732 732  )))
733 733  
734 734  
748 +
735 735  == 7.4 Data Rate ==
736 736  
737 737  
738 -Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
752 +Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
739 739  
754 +(% style="color:red" %)
755 +**Notice:**
740 740  
757 +* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
758 +* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
759 +
741 741  (% style="color:blue" %)**AT Command: AT+DR**
742 742  
743 743  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
... ... @@ -754,8 +754,8 @@
754 754  
755 755  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
756 756  
757 -* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
758 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
776 +* **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
777 +* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
759 759  
760 760  
761 761  
... ... @@ -765,7 +765,7 @@
765 765  Feature: Get or Set the Frame Counter Downlink.
766 766  
767 767  
768 -(% style="color:blue" %)**AT Command:AT+FCD**
787 +(% style="color:blue" %)**AT Command:  AT+FCD**
769 769  
770 770  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
771 771  |=(% colspan="3" style="width: 690px;" %)AT+FCD
... ... @@ -778,12 +778,13 @@
778 778  )))
779 779  
780 780  
800 +
781 781  == 7.6 Frame Counter Uplink ==
782 782  
783 783  Feature: Get or Set the Frame Counter Uplink.
784 784  
785 785  
786 -(% style="color:blue" %)**AT Command:AT+FCU**
806 +(% style="color:blue" %)**AT Command:  AT+FCU**
787 787  
788 788  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
789 789  |=(% colspan="3" style="width: 531px;" %)AT+FCU
... ... @@ -796,6 +796,7 @@
796 796  )))
797 797  
798 798  
819 +
799 799  == 7.7 Join Accept Delay1 ==
800 800  
801 801  
... ... @@ -802,7 +802,7 @@
802 802  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
803 803  
804 804  
805 -(% style="color:blue" %)**AT Command:AT+JN1DL**
826 +(% style="color:blue" %)**AT Command:  AT+JN1DL**
806 806  
807 807  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
808 808  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
... ... @@ -815,12 +815,14 @@
815 815  )))
816 816  
817 817  
839 +
818 818  == 7.8 Join Accept Delay2 ==
819 819  
842 +
820 820  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
821 821  
822 822  
823 -(% style="color:blue" %)**AT Command:AT+JN2DL**
846 +(% style="color:blue" %)**AT Command:  AT+JN2DL**
824 824  
825 825  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
826 826  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
... ... @@ -833,15 +833,16 @@
833 833  )))
834 834  
835 835  
859 +
836 836  == 7.9 Public Network Mode ==
837 837  
838 838  
839 839  Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
840 840  
841 -(% style="color:red" %)Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
865 +(% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
842 842  
843 843  
844 -(% style="color:blue" %)**AT Command:AT+PNM**
868 +(% style="color:blue" %)**AT Command:  AT+PNM**
845 845  
846 846  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
847 847  |=(% colspan="3" style="width: 664px;" %)AT+PNM
... ... @@ -861,6 +861,7 @@
861 861  |(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
862 862  
863 863  
888 +
864 864  == 7.10 Receive Delay1 ==
865 865  
866 866  
... ... @@ -867,7 +867,7 @@
867 867  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
868 868  
869 869  
870 -(% style="color:blue" %)**AT Command:AT+RX1DL**
895 +(% style="color:blue" %)**AT Command: AT+RX1DL**
871 871  
872 872  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
873 873  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
... ... @@ -887,7 +887,7 @@
887 887  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
888 888  
889 889  
890 -(% style="color:blue" %)**AT Command:AT+RX2DL**
915 +(% style="color:blue" %)**AT Command: AT+RX2DL**
891 891  
892 892  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
893 893  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
... ... @@ -907,7 +907,7 @@
907 907  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
908 908  
909 909  
910 -(% style="color:blue" %)**AT Command:AT+RX2DR**
935 +(% style="color:blue" %)**AT Command:  AT+RX2DR**
911 911  
912 912  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
913 913  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
... ... @@ -927,7 +927,7 @@
927 927  Feature: Get or Set the Rx2 window frequency
928 928  
929 929  
930 -(% style="color:blue" %)**AT Command:AT+RX2FQ**
955 +(% style="color:blue" %)**AT Command:  AT+RX2FQ**
931 931  
932 932  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
933 933  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
... ... @@ -946,9 +946,11 @@
946 946  
947 947  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
948 948  
974 +(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
949 949  
950 -(% style="color:blue" %)**AT Command:AT+TXP**
951 951  
977 +(% style="color:blue" %)**AT Command:  AT+TXP**
978 +
952 952  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
953 953  |=(% colspan="3" style="width: 462px;" %)AT+TXP
954 954  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -963,12 +963,11 @@
963 963  
964 964  If the downlink payload=22000100, it means setting the TXP to 0.
965 965  
966 -* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
967 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
993 +* **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
994 +* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+TXP=0.
968 968  
969 969  
970 970  
971 -
972 972  == 7.15 RSSI of the Last Received Packet ==
973 973  
974 974  
... ... @@ -992,7 +992,7 @@
992 992  Feature: Get the SNR of the last received packet
993 993  
994 994  
995 -(% style="color:blue" %)**AT Command:AT+SNR**
1021 +(% style="color:blue" %)**AT Command:  AT+SNR**
996 996  
997 997  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
998 998  |=(% colspan="3" style="width: 568px;" %)AT+SNR
... ... @@ -1019,7 +1019,6 @@
1019 1019  )))
1020 1020  |(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
1021 1021  
1022 -
1023 1023  (% style="color:blue" %)**Downlink Command: 0x23**
1024 1024  
1025 1025  Format: Command Code (0x23) followed by 1 bytes port value.
... ... @@ -1026,12 +1026,11 @@
1026 1026  
1027 1027  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
1028 1028  
1029 -* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
1030 -* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
1054 +* **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1055 +* **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1031 1031  
1032 1032  
1033 1033  
1034 -
1035 1035  == 7.18 Single Channel Mode ==
1036 1036  
1037 1037  
... ... @@ -1052,6 +1052,7 @@
1052 1052  
1053 1053  == 7.19 Eight Channel Mode ==
1054 1054  
1079 +
1055 1055  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1056 1056  
1057 1057  
... ... @@ -1067,19 +1067,17 @@
1067 1067  )))
1068 1068  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1069 1069  
1095 +(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
1070 1070  
1071 -(% style="color:blue" %)**Downlink Command: 0x24**
1072 -
1073 1073  Format: Command Code (0x24) followed by 1 bytes channel value.
1074 1074  
1075 1075  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1076 1076  
1077 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1078 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
1101 +* **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1102 +* **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1079 1079  
1080 1080  
1081 1081  
1082 -
1083 1083  == 7.20 Get or Set RXwindows1 timeout ==
1084 1084  
1085 1085  
... ... @@ -1099,8 +1099,9 @@
1099 1099  (((
1100 1100  
1101 1101  
1102 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1103 1103  
1126 +(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1127 +
1104 1104  
1105 1105  )))
1106 1106  
... ... @@ -1147,7 +1147,6 @@
1147 1147  )))
1148 1148  |(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
1149 1149  
1150 -
1151 1151  (% style="color:blue" %)**Downlink Command: 0x25**
1152 1152  
1153 1153  Format: Command Code (0x25) followed by 1 bytes state value.
... ... @@ -1154,12 +1154,11 @@
1154 1154  
1155 1155  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1156 1156  
1157 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1158 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1180 +* **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1181 +* **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1159 1159  
1160 1160  
1161 1161  
1162 -
1163 1163  == 7.23 Set Packet Receiving Response Level ==
1164 1164  
1165 1165  
... ... @@ -1166,7 +1166,7 @@
1166 1166  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1167 1167  
1168 1168  
1169 -RPL value:
1191 +**RPL value:**
1170 1170  
1171 1171  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1172 1172  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
... ... @@ -1174,16 +1174,12 @@
1174 1174  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1175 1175  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1176 1176  
1199 +**Case Analyes:**
1177 1177  
1178 -
1179 -Case Analyes:
1180 -
1181 1181  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1182 1182  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1183 1183  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1184 1184  
1185 -
1186 -
1187 1187  (% style="color:blue" %)**AT Command: AT+RPL**
1188 1188  
1189 1189  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
... ... @@ -1194,7 +1194,6 @@
1194 1194  )))
1195 1195  |(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
1196 1196  
1197 -
1198 1198  (% style="color:blue" %)**Downlink Command: 0x21**
1199 1199  
1200 1200  Format: Command Code (0x21) followed by 1 bytes level value.
... ... @@ -1201,30 +1201,32 @@
1201 1201  
1202 1202  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1203 1203  
1204 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1205 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1221 +* **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1222 +* **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1206 1206  
1207 1207  
1208 1208  
1209 -
1210 1210  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1211 1211  
1212 1212  
1213 1213  (% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1214 1214  
1215 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1216 -|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1217 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1218 -|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1231 +(% border="1" style="background-color:#ffffcc; color:green; width:589px" %)
1232 +|=(% colspan="3" style="width: 586px;" %)AT+**SETMAXNBTRANS**
1233 +|(% style="width:227px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:87px" %)**Response**
1234 +|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1219 1219  OK
1220 1220  )))
1221 -|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1237 +|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1238 +value2: 0: uplink fcnt doesn't change for each NBTrans;
1239 +
1240 +1: uplink fcnt increase by 1 for each NBTrans.
1241 +)))|(% style="width:87px" %)(((
1222 1222  1
1223 1223  
1224 1224  OK
1225 1225  )))
1226 1226  
1227 -
1228 1228  (% style="color:blue" %)**Downlink Command: 0x33**
1229 1229  
1230 1230  Format: Command Code (0x33) followed by 2 bytes mode value.
... ... @@ -1231,12 +1231,11 @@
1231 1231  
1232 1232  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1233 1233  
1234 -* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1235 -* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1253 +* Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1254 +* Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1236 1236  
1237 1237  
1238 1238  
1239 -
1240 1240  == 7.25 Device offline rejoining （LWS007) ==
1241 1241  
1242 1242  
... ... @@ -1273,7 +1273,6 @@
1273 1273  OK
1274 1274  )))
1275 1275  
1276 -
1277 1277  (% style="color:blue" %)**Downlink Command: 0x33**
1278 1278  
1279 1279  Format: Command Code (0x32) followed by 2 bytes mode value.
... ... @@ -1280,11 +1280,10 @@
1280 1280  
1281 1281  If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1282 1282  
1283 -* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1300 +* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1284 1284  
1285 1285  
1286 1286  
1287 -
1288 1288  == 7.26 Request the server to send an ACK ==
1289 1289  
1290 1290  
... ... @@ -1312,16 +1312,15 @@
1312 1312  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1313 1313  |=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1314 1314  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1315 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1331 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1316 1316  OK
1317 1317  
1318 -the interval is 30000ms = 30s
1334 +the interval is 30 min
1319 1319  )))
1320 -|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1321 -Set the ReJoin data transmission interval to 60000ms = 60 seconds
1336 +|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1337 +Set the ReJoin data transmission interval to 60 min
1322 1322  )))
1323 1323  
1324 -
1325 1325  (% style="color:blue" %)**Downlink Command: 0x26**
1326 1326  
1327 1327  Format: Command Code (0x26) followed by 2 bytes mode value.
... ... @@ -1328,24 +1328,21 @@
1328 1328  
1329 1329  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1330 1330  
1331 -* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1332 -* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1346 +* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1347 +* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1333 1333  
1334 1334  
1335 1335  
1336 -
1337 1337  = 8. AT Commands Combination =
1338 1338  
1339 -
1340 1340  == 8.1 Set a fix RX2DR for downlink window ==
1341 1341  
1342 1342  
1343 -* **AT+ADR=0  ** **~-~->**  Disable ADR first
1344 -* **AT+RX2DR=xxxx**  **~-~->**  Set xxxx to your wanted DataRate
1356 +* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1357 +* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1345 1345  
1346 1346  
1347 1347  
1348 -
1349 1349  == 8.2 Use Downlink Command to set a fix uplink DR ==
1350 1350  
1351 1351  
... ... @@ -1353,6 +1353,8 @@
1353 1353  
1354 1354  **Same as:**
1355 1355  
1356 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1357 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1358 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1368 +* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1369 +* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1370 +* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1371 +
1372 +

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0