Last modified by kai on 2024/09/06 10:00
<
From version < 50.5 >
edited by Xiaoling
on 2022/07/13 12:01
To version < 14.1 >
edited by Xiaoling
on 2022/05/11 12:00
>
Change comment: Uploaded new attachment "image-20220511120050-1.png", version {1}

Summary

Details

Page properties
Content
... ... @@ -1,118 +1,53 @@
1 - **Table of** **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 -
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 12  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
13 13  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 -(((
16 16  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17 17  
18 -)))
19 19  
20 20  = 2. How to use AT Commands or Downlink command =
21 21  
22 -
23 23  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 24  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
25 -** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
27 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
28 28  
29 -
30 -
31 31  = 3. Support End Node and firmware version =
32 32  
33 -
34 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
35 -|=(% colspan="3" style="width: 963px;" %)(((
36 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
37 -)))
38 -|(% style="width:187px" %)(((
39 -**Model**
40 -)))|(% style="width:330px" %)(((
41 -**Description**
42 -)))|(% style="width:445px" %)(((
43 -**Firmware Version <~-~-> Stack Version**
44 -)))
45 -|(% style="width:187px" %)(((
46 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
47 -)))|(% style="width:330px" %)(((
48 -Open Source Generic LoRaWAN Sensor Node
49 -)))|(% style="width:445px" %)(((
50 -(((
51 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
52 -)))
53 -
54 -(((
55 -(((
26 +(% border="1" style="background-color:#ffffcc; border:1; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
56 56  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
57 57  )))
58 -)))
59 -)))
60 -|(% style="width:187px" %)(((
61 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
62 -)))|(% style="width:330px" %)(((
63 -LoRaWAN GPS Tracker
64 -)))|(% style="width:445px" %)(((
65 -(((
66 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
67 -)))
68 -
69 -(((
70 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
71 71  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
72 72  )))
73 -)))
74 -)))
75 -|(% style="width:187px" %)(((
76 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
77 -)))|(% style="width:330px" %)(((
78 -LoRaWAN BLE Indoor Tracker
79 -)))|(% style="width:445px" %)(((
80 -LBT1 v1.0 <~-~-> DR-LWS-005;
81 -)))
82 -|(% style="width:187px" %)(((
83 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
84 -)))|(% style="width:330px" %)(((
85 -LoRaWAN RS485 Modbus Converter
86 -)))|(% style="width:445px" %)(((
87 -RS485-LN v1.3 <~-~-> DR-LWS-005;
88 -)))
89 -|(% style="width:187px" %)(((
90 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
91 -)))|(% style="width:330px" %)(((
92 -LoRaWAN Temperature & Humidity Sensor
93 -)))|(% style="width:445px" %)(((
94 -(((
95 -LHT65 v1.7 <~-~-> DR-LWS-003;
96 -)))
97 -
98 -(((
99 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
100 100  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
101 101  )))
102 -)))
103 -)))
104 104  
105 -
106 -
107 107  = 4. System Management Commands =
108 108  
109 -
110 110  == 4.1 Change Uplink Interval ==
111 111  
112 -
113 113  Feature: Change LoRaWAN End Node Transmit Interval.
114 114  
115 -(% style="color:blue" %)**AT Command: AT+TDC**
47 +(% class="box infomessage" %)
48 +(((
49 +**AT Command: AT+TDC**
50 +)))
116 116  
117 117  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
118 118  |=(% colspan="3" style="width: 724px;" %)AT+TDC
... ... @@ -126,33 +126,26 @@
126 126  Set transmit interval to 60000ms = 60 seconds
127 127  )))
128 128  
129 -(((
130 -
64 +{{info}}
65 +**Downlink Command: 0x01**
66 +{{/info}}
131 131  
132 -(% style="color:blue" %)**Downlink Command: 0x01**
133 -
134 134  Format: Command Code (0x01) followed by 3 bytes time value.
135 -)))
136 136  
137 -(((
138 138  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
139 -)))
140 140  
141 141  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
142 142  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
143 143  
144 -
145 -
146 146  == 4.2 Reboot End Node ==
147 147  
148 -
149 149  Feature: Reboot End Node to perform a new OTAA or ABP Join.
150 150  
79 +{{info}}
80 +**AT Command: ATZ**
81 +{{/info}}
151 151  
152 -(% style="color:blue" %)**AT Command: ATZ**
153 -
154 -
155 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
156 156  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
157 157  |**Command Example**|**Function**|**Response**
158 158  |ATZ|Reset MCU|(((
... ... @@ -169,28 +169,23 @@
169 169  <followed by the Tx and Rx information>
170 170  )))
171 171  
100 +{{info}}
101 +**Downlink Command: 0x04**
102 +{{/info}}
172 172  
173 -(% style="color:blue" %)**Downlink Command: 0x04**
174 -
175 -
176 -(((
177 177  Format: Command Code (0x04) followed by FF.
178 -)))
179 179  
180 -(((
181 181  If the downlink payload=**04FF**, the end node will reboot.
182 182  
183 -
184 -)))
185 -
186 186  == 4.3 Reset to factory Default ==
187 187  
188 -
189 189  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
190 190  
191 -(% style="color:blue" %)**AT Command: AT+FDR**
112 +{{info}}
113 +**AT Command: AT+FDR**
114 +{{/info}}
192 192  
193 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
194 194  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
195 195  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
196 196  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -207,17 +207,13 @@
207 207  Please set the parameters or reset Device to apply change
208 208  )))
209 209  
133 +{{info}}
134 +**Downlink Command: 0x04**
135 +{{/info}}
210 210  
211 -(% style="color:blue" %)**Downlink Command: 0x04**
212 -
213 -
214 -(((
215 215  Format: Command Code (0x04) followed by FE.
216 -)))
217 217  
218 -(((
219 219  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
220 -)))
221 221  
222 222  
223 223  == 4.4 Show Firmware Version ==
... ... @@ -224,42 +224,34 @@
224 224  
225 225  Feature: Show firmware version. No downlink command yet.
226 226  
146 +{{info}}
147 +**AT Command: AT+VER**
148 +{{/info}}
227 227  
228 -(% style="color:blue" %)**AT Command: AT+VER**
229 -
230 -
231 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
232 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
233 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
234 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
235 235  1.3 EU868
236 236  
237 237  OK
238 238  )))
239 239  
159 +{{info}}
160 +**Downlink Command: 0x26 (Valid in 006 stack)**
161 +{{/info}}
240 240  
241 -(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
242 -
243 -
244 -(((
245 245  Downlink Format: 0x26
246 -)))
247 247  
248 -(((
249 249  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
250 -)))
251 251  
252 -(((
253 253  **xx: Software Type:**
254 -)))
255 255  
256 256  * 0x00 01: LGT92 Version
257 257  * 0x00 02: LBT1
258 258  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
259 259  
260 -(((
261 261  **yy: Frequency Band:**
262 -)))
263 263  
264 264  * 0x01: EU868
265 265  * 0x02: US915
... ... @@ -272,9 +272,7 @@
272 272  * 0x09: AS923-2
273 273  * 0xa0: AS923-3
274 274  
275 -(((
276 276  **zz: Subband**
277 -)))
278 278  
279 279  firmware version: v1.1.0 ~-~-> 110
280 280  
... ... @@ -283,11 +283,11 @@
283 283  
284 284  Feature: Show All configure. No downlink command yet.
285 285  
195 +{{info}}
196 +**AT Command: AT+CFG**
197 +{{/info}}
286 286  
287 -(% style="color:blue" %)**AT Command: AT+CFG**
288 -
289 -
290 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
291 291  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
292 292  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
293 293  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -310,11 +310,11 @@
310 310  
311 311  Feature: Get or Set the Application EUI.
312 312  
222 +{{info}}
223 +**AT Command: AT+APPEUI**
224 +{{/info}}
313 313  
314 -(% style="color:blue" %)**AT Command: AT+APPEUI**
315 -
316 -
317 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
318 318  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
319 319  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
320 320  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -326,11 +326,11 @@
326 326  
327 327  Feature: Get or Set the Application Key.
328 328  
238 +{{info}}
239 +**AT Command: AT+APPKEY**
240 +{{/info}}
329 329  
330 -(% style="color:blue" %)**AT Command: AT+APPKEY**
331 -
332 -
333 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
334 334  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
335 335  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
336 336  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -342,11 +342,11 @@
342 342  
343 343  Feature: Get or Set the Application Session Key.
344 344  
254 +{{info}}
255 +**AT Command: AT+APPSKEY**
256 +{{/info}}
345 345  
346 -(% style="color:blue" %)**AT Command: AT+APPSKEY**
347 -
348 -
349 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
350 350  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
351 351  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
352 352  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -360,11 +360,11 @@
360 360  
361 361  Feature: Get or Set the Device Address.
362 362  
272 +{{info}}
273 +**AT Command: AT+DADDR**
274 +{{/info}}
363 363  
364 -(% style="color:blue" %)**AT Command: AT+DADDR**
365 -
366 -
367 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
368 368  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
369 369  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
370 370  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -378,11 +378,11 @@
378 378  
379 379  Feature: Get or Set the Device EUI.
380 380  
290 +{{info}}
291 +**AT Command: AT+DEUI**
292 +{{/info}}
381 381  
382 -(% style="color:blue" %)**AT Command: AT+DEUI**
383 -
384 -
385 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
386 386  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
387 387  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
388 388  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -396,11 +396,11 @@
396 396  
397 397  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
398 398  
308 +{{info}}
309 +**AT Command: AT+NWKID**
310 +{{/info}}
399 399  
400 -(% style="color:blue" %)**AT Command: AT+NWKID**
401 -
402 -
403 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
404 404  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
405 405  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
406 406  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -412,11 +412,11 @@
412 412  
413 413  Feature: Get or Set the Network Session Key
414 414  
324 +{{info}}
325 +**AT Command: AT+NWKSKEY**
326 +{{/info}}
415 415  
416 -(% style="color:blue" %)**AT Command: AT+NWKSKEY**
417 -
418 -
419 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
420 420  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
421 421  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
422 422  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -428,15 +428,13 @@
428 428  
429 429  == 6.1 Confirm Mode ==
430 430  
431 -=== AT+CFM command before DR-LWS007 software stack ===
432 -
433 433  Feature: Get or Set the confirmation mode (0-1).
434 434  
342 +{{info}}
343 +**AT Command: AT+CFM**
344 +{{/info}}
435 435  
436 -(% style="color:blue" %)**AT Command: AT+CFM**
437 -
438 -
439 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
440 440  |=(% colspan="3" style="width: 707px;" %)AT+CFM
441 441  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
442 442  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -445,7 +445,7 @@
445 445  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
446 446  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
447 447  
448 -(% style="color:blue" %)**Downlink Command: 0x05**
355 +Downlink Command: 0x05
449 449  
450 450  Format: Command Code (0x05) followed by 2 bytes mode value.
451 451  
... ... @@ -454,63 +454,15 @@
454 454  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
455 455  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
456 456  
457 -=== AT+CFM command since DR-LWS007 software stack ===
458 -
459 -
460 -(% style="color:blue" %)**AT Command: AT+CFM**
461 -
462 -
463 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
466 -|(% style="width:160px" %)(((
467 -AT+CFM=1,0,0
468 -
469 -value1
470 -)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
471 -1
472 -
473 -OK
474 -)))
475 -|(% style="width:160px" %)(((
476 -AT+CFM=0,?,0
477 -
478 -value2
479 -)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
480 -0~~7
481 -
482 -OK
483 -)))
484 -|(% style="width:160px" %)(((
485 -AT+CFM=0,0,1
486 -
487 -value3
488 -)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
489 -1
490 -
491 -OK
492 -)))
493 -
494 -
495 -(% style="color:blue" %)**Downlink Command: 0x05**
496 -
497 -
498 -Format: Command Code (0x05) followed by 2 bytes mode value.
499 -
500 -If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
501 -
502 -* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
503 -* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
504 -
505 505  == 6.2 Confirm Status ==
506 506  
507 507  Feature: Get confirmation status of the last AT+SEND (0-1).
508 508  
368 +{{info}}
369 +**AT Command: AT+CFS**
370 +{{/info}}
509 509  
510 -(% style="color:blue" %)**AT Command: AT+CFS**
511 -
512 -
513 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
514 514  |=(% colspan="3" style="width: 531px;" %)AT+CFS
515 515  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
516 516  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
... ... @@ -521,11 +521,11 @@
521 521  
522 522  Feature: Join network.
523 523  
383 +{{info}}
384 +**AT Command: AT+JOIN**
385 +{{/info}}
524 524  
525 -(% style="color:blue" %)**AT Command: AT+JOIN**
526 -
527 -
528 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
529 529  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
530 530  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
531 531  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
... ... @@ -538,11 +538,11 @@
538 538  
539 539  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
540 540  
400 +{{info}}
401 +**AT Command: AT+NJM**
402 +{{/info}}
541 541  
542 -(% style="color:blue" %)**AT Command: AT+NJM**
543 -
544 -
545 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
546 546  |=(% colspan="3" style="width: 750px;" %)AT+NJM
547 547  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
548 548  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
... ... @@ -551,15 +551,15 @@
551 551  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
552 552  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
553 553  
413 +{{info}}
414 +**Downlink Command: 0x20**
415 +{{/info}}
554 554  
555 -(% style="color:blue" %)**Downlink Command: 0x20**
556 -
557 -
558 558  Format: Command Code (0x20) followed by 1 bytes mode value.
559 559  
560 560  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
561 561  
562 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
421 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
563 563  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
564 564  
565 565  == 6.5 LoRa® Network Join Status ==
... ... @@ -566,11 +566,11 @@
566 566  
567 567  Feature: LoRa® Network Join Status.
568 568  
428 +{{info}}
429 +**AT Command: AT+NJS**
430 +{{/info}}
569 569  
570 -(% style="color:blue" %)**AT Command: AT+NJS**
571 -
572 -
573 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
574 574  |=(% colspan="3" style="width: 495px;" %)AT+NJS
575 575  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
576 576  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
... ... @@ -581,11 +581,11 @@
581 581  
582 582  Feature: Print Last Received Data in Raw Format<port:data>.
583 583  
443 +{{info}}
444 +**AT Command: AT+RECV**
445 +{{/info}}
584 584  
585 -(% style="color:blue" %)**AT Command: AT+RECV**
586 -
587 -
588 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
589 589  |=(% colspan="3" style="width: 584px;" %)AT+RECV
590 590  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
591 591  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
... ... @@ -596,11 +596,11 @@
596 596  
597 597  Feature: Print Last Received Data in Binary Format<port:data>.
598 598  
458 +{{info}}
459 +**AT Command: AT+RECVB**
460 +{{/info}}
599 599  
600 -(% style="color:blue" %)**AT Command: AT+RECVB**
601 -
602 -
603 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
604 604  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
605 605  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
606 606  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
... ... @@ -611,11 +611,11 @@
611 611  
612 612  Feature: Send Text Data<port:data>.
613 613  
473 +{{info}}
474 +**AT Command: AT+SEND**
475 +{{/info}}
614 614  
615 -(% style="color:blue" %)**AT Command: AT+SEND**
616 -
617 -
618 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
619 619  |=(% colspan="3" style="width: 988px;" %)AT+SEND
620 620  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
621 621  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
... ... @@ -630,11 +630,11 @@
630 630  
631 631  Feature: Send hexadecimal data along with the application port.
632 632  
492 +{{info}}
493 +**AT Command: AT+SENDB**
494 +{{/info}}
633 633  
634 -(% style="color:blue" %)**AT Command: AT+SENDB**
635 -
636 -
637 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
638 638  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
639 639  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
640 640  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
... ... @@ -650,11 +650,11 @@
650 650  
651 651  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
652 652  
512 +{{info}}
513 +**AT Command: AT+ADR**
514 +{{/info}}
653 653  
654 -(% style="color:blue" %)**AT Command: AT+ADR**
655 -
656 -
657 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
658 658  |=(% colspan="3" style="width: 680px;" %)AT+ADR
659 659  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
660 660  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
... ... @@ -665,11 +665,11 @@
665 665  AT_PARAM_ERROR
666 666  )))
667 667  
527 +{{info}}
528 +**Downlink Command: 0x22**
529 +{{/info}}
668 668  
669 -(% style="color:blue" %)**Downlink Command: 0x22**
670 670  
671 -
672 -
673 673  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
674 674  
675 675  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
... ... @@ -679,11 +679,11 @@
679 679  
680 680  Feature: Get or Set the Device Class(Currently only support class A, class C).
681 681  
541 +{{info}}
542 +**AT Command:AT+CLASS**
543 +{{/info}}
682 682  
683 -(% style="color:blue" %)**AT Command:AT+CLASS**
684 -
685 -
686 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
687 687  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
688 688  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
689 689  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
... ... @@ -697,11 +697,11 @@
697 697  
698 698  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
699 699  
559 +{{info}}
560 +**AT Command:AT+DCS**
561 +{{/info}}
700 700  
701 -(% style="color:blue" %)**AT Command:AT+DCS**
702 -
703 -
704 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
705 705  |=(% colspan="3" style="width: 512px;" %)AT+DCS
706 706  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
707 707  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
... ... @@ -715,11 +715,11 @@
715 715  
716 716  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
717 717  
577 +{{info}}
578 +**AT Command: AT+DR**
579 +{{/info}}
718 718  
719 -(% style="color:blue" %)**AT Command: AT+DR**
720 -
721 -
722 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
723 723  |=(% colspan="3" style="width: 463px;" %)AT+DR
724 724  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
725 725  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
... ... @@ -729,11 +729,11 @@
729 729  
730 730  )))
731 731  
591 +{{info}}
592 +**Downlink Command: 0x2200aaFF**
593 +{{/info}}
732 732  
733 -(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
734 734  
735 -
736 -
737 737  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
738 738  
739 739  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
... ... @@ -743,11 +743,11 @@
743 743  
744 744  Feature: Get or Set the Frame Counter Downlink.
745 745  
605 +{{info}}
606 +**AT Command:AT+FCD**
607 +{{/info}}
746 746  
747 -(% style="color:blue" %)**AT Command:AT+FCD**
748 -
749 -
750 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
751 751  |=(% colspan="3" style="width: 690px;" %)AT+FCD
752 752  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
753 753  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
... ... @@ -763,11 +763,11 @@
763 763  
764 764  Feature: Get or Set the Frame Counter Uplink.
765 765  
625 +{{info}}
626 +**AT Command:AT+FCU**
627 +{{/info}}
766 766  
767 -(% style="color:blue" %)**AT Command:AT+FCU**
768 -
769 -
770 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
771 771  |=(% colspan="3" style="width: 531px;" %)AT+FCU
772 772  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
773 773  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
... ... @@ -781,11 +781,11 @@
781 781  
782 782  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
783 783  
643 +{{info}}
644 +**AT Command:AT+JN1DL**
645 +{{/info}}
784 784  
785 -(% style="color:blue" %)**AT Command:AT+JN1DL**
786 -
787 -
788 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
789 789  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
790 790  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
791 791  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
... ... @@ -799,11 +799,11 @@
799 799  
800 800  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
801 801  
661 +{{info}}
662 +**AT Command:AT+JN2DL**
663 +{{/info}}
802 802  
803 -(% style="color:blue" %)**AT Command:AT+JN2DL**
804 -
805 -
806 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
807 807  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
808 808  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
809 809  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
... ... @@ -815,40 +815,33 @@
815 815  
816 816  == 7.9 Public Network Mode ==
817 817  
818 -Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
677 +Feature: Get or Set the public network mode. (0: off, 1: on)
819 819  
820 -Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
679 +{{info}}
680 +**AT Command:AT+PNM**
681 +{{/info}}
821 821  
822 -
823 -(% style="color:blue" %)**AT Command:AT+PNM**
824 -
825 -
826 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
827 827  |=(% colspan="3" style="width: 664px;" %)AT+PNM
828 828  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
829 829  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
830 830  OK
831 831  )))
832 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
833 -Set the public network mode.
834 -
835 -Set syncword=0x34
836 -)))|(% style="width:272px" %)(System will write new value to PNM)(((
689 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
837 837  OK
838 838  
839 839  
840 840  )))
841 -|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
842 842  
843 843  == 7.10 Receive Delay1 ==
844 844  
845 845  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
846 846  
699 +{{info}}
700 +**AT Command:AT+RX1DL**
701 +{{/info}}
847 847  
848 -(% style="color:blue" %)**AT Command:AT+RX1DL**
849 -
850 -
851 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
852 852  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
853 853  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
854 854  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
... ... @@ -858,15 +858,15 @@
858 858  
859 859  )))
860 860  
861 -== 7.11 Receive Delay2 ==
713 +== 7.11Receive Delay2 ==
862 862  
863 863  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
864 864  
717 +{{info}}
718 +**AT Command:AT+RX2DL**
719 +{{/info}}
865 865  
866 -(% style="color:blue" %)**AT Command:AT+RX2DL**
867 -
868 -
869 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
721 +(% style="background-color:#ffffcc; color:green; width:481.222px" %)
870 870  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
871 871  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
872 872  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
... ... @@ -880,11 +880,11 @@
880 880  
881 881  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
882 882  
735 +{{info}}
736 +**AT Command:AT+RX2DR**
737 +{{/info}}
883 883  
884 -(% style="color:blue" %)**AT Command:AT+RX2DR**
885 -
886 -
887 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
739 +(% style="background-color:#ffffcc; color:green; width:525.222px" %)
888 888  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
889 889  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
890 890  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
... ... @@ -898,11 +898,11 @@
898 898  
899 899  Feature: Get or Set the Rx2 window frequency
900 900  
753 +{{info}}
754 +**AT Command:AT+RX2FQ**
755 +{{/info}}
901 901  
902 -(% style="color:blue" %)**AT Command:AT+RX2FQ**
903 -
904 -
905 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
757 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
906 906  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
907 907  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
908 908  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
... ... @@ -916,11 +916,11 @@
916 916  
917 917  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
918 918  
771 +{{info}}
772 +**AT Command:AT+TXP**
773 +{{/info}}
919 919  
920 -(% style="color:blue" %)**AT Command:AT+TXP**
921 -
922 -
923 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
775 +(% style="background-color:#ffffcc; color:green; width:465.222px" %)
924 924  |=(% colspan="3" style="width: 462px;" %)AT+TXP
925 925  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
926 926  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
... ... @@ -941,11 +941,11 @@
941 941  
942 942  Feature: Get or Set the Rx2 window frequency
943 943  
796 +{{info}}
797 +**AT Command:AT+RSSI**
798 +{{/info}}
944 944  
945 -(% style="color:blue" %)**AT Command:AT+RSSI**
946 -
947 -
948 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
800 +(% style="background-color:#ffffcc; color:green; width:557.222px" %)
949 949  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
950 950  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
951 951  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
... ... @@ -960,7 +960,7 @@
960 960  **AT Command:AT+SNR**
961 961  {{/info}}
962 962  
963 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
815 +(% style="background-color:#ffffcc; color:green; width:571.222px" %)
964 964  |=(% colspan="3" style="width: 568px;" %)AT+SNR
965 965  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
966 966  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
... ... @@ -975,7 +975,7 @@
975 975  **AT Command: AT+PORT**
976 976  {{/info}}
977 977  
978 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
830 +(% style="background-color:#ffffcc; color:green; width:500.222px" %)
979 979  |=(% colspan="3" style="width: 497px;" %)AT+PORT
980 980  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
981 981  |(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
... ... @@ -1002,7 +1002,7 @@
1002 1002  **AT Command: AT+CHS**
1003 1003  {{/info}}
1004 1004  
1005 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
857 +(% style="background-color:#ffffcc; color:green; width:603.222px" %)
1006 1006  |=(% colspan="3" style="width: 600px;" %)AT+CHS
1007 1007  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
1008 1008  |(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
... ... @@ -1018,7 +1018,7 @@
1018 1018  **AT Command: AT+CHE**
1019 1019  {{/info}}
1020 1020  
1021 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
873 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
1022 1022  |=(% colspan="3" style="width: 707px;" %)AT+CHE
1023 1023  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1024 1024  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
... ... @@ -1047,7 +1047,7 @@
1047 1047  **AT Command: AT+RX1WTO**
1048 1048  {{/info}}
1049 1049  
1050 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
902 +(% style="background-color:#ffffcc; color:green; width:460.222px" %)
1051 1051  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1052 1052  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1053 1053  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
... ... @@ -1055,18 +1055,12 @@
1055 1055  )))
1056 1056  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1057 1057  
1058 -(((
1059 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1060 -)))
910 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1061 1061  
1062 -[[image:image-20220526162535-1.png]]
912 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1063 1063  
1064 -(((
1065 1065  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1066 1066  
1067 -
1068 -)))
1069 -
1070 1070  == 7.21 Get or Set RXwindows2 timeout ==
1071 1071  
1072 1072  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
... ... @@ -1075,7 +1075,7 @@
1075 1075  **AT Command: AT+RX2WTO**
1076 1076  {{/info}}
1077 1077  
1078 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
924 +(% style="background-color:#ffffcc; color:green; width:497.222px" %)
1079 1079  |=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1080 1080  |(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1081 1081  |(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
... ... @@ -1091,7 +1091,7 @@
1091 1091  **AT Command: AT+DWELLT**
1092 1092  {{/info}}
1093 1093  
1094 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
940 +(% style="background-color:#ffffcc; color:green; width:497.222px" %)
1095 1095  |=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1096 1096  |(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1097 1097  |(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
... ... @@ -1132,7 +1132,7 @@
1132 1132  **AT Command: AT+RPL**
1133 1133  {{/info}}
1134 1134  
1135 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
981 +(% style="background-color:#ffffcc; color:green; width:536.222px" %)
1136 1136  |=(% colspan="3" style="width: 533px;" %)AT+RPL
1137 1137  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1138 1138  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
... ... @@ -1151,129 +1151,6 @@
1151 1151  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1152 1152  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1153 1153  
1154 -== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1155 -
1156 -{{info}}
1157 -**AT Command: AT+SETMAXNBTRANS **
1158 -{{/info}}
1159 -
1160 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1161 -|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1162 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1163 -|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1164 -OK
1165 -)))
1166 -|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1167 -1
1168 -
1169 -OK
1170 -)))
1171 -
1172 -{{info}}
1173 -**Downlink Command: 0x33**
1174 -{{/info}}
1175 -
1176 -Format: Command Code (0x33) followed by 2 bytes mode value.
1177 -
1178 -If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1179 -
1180 -* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1181 -* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1182 -
1183 -== 7.25 Device offline rejoining （LWS007) ==
1184 -
1185 -{{info}}
1186 -**AT Command: AT+DDETECT**
1187 -{{/info}}
1188 -
1189 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1190 -|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1191 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1192 -|(% style="width:160px" %)(((
1193 -AT+DDETECT=1,1440,2880
1194 -
1195 -value1
1196 -)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1197 -1
1198 -
1199 -OK
1200 -)))
1201 -|(% style="width:160px" %)(((
1202 -AT+DDETECT=1,?,2880
1203 -
1204 -value2
1205 -)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1206 -
1207 -
1208 -OK
1209 -)))
1210 -|(% style="width:160px" %)(((
1211 -AT+DDETECT=1,1440,？
1212 -
1213 -value3
1214 -)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1215 -
1216 -
1217 -OK
1218 -)))
1219 -
1220 -{{info}}
1221 -**Downlink Command: 0x33**
1222 -{{/info}}
1223 -
1224 -Format: Command Code (0x32) followed by 2 bytes mode value.
1225 -
1226 -If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1227 -
1228 -* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1229 -
1230 -== 7.26 Request the server to send an ACK ==
1231 -
1232 -{{info}}
1233 -**AT Command: AT+PNACKMD**
1234 -{{/info}}
1235 -
1236 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1237 -|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1238 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1239 -|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1240 -OK
1241 -)))
1242 -|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1243 -0
1244 -
1245 -OK
1246 -)))
1247 -
1248 -== 7.27 Adjust network rejoining interval ==
1249 -
1250 -{{info}}
1251 -**AT Command: AT+RJTDC**
1252 -{{/info}}
1253 -
1254 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1255 -|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1256 -|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1257 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1258 -OK
1259 -
1260 -the interval is 30000ms = 30s
1261 -)))
1262 -|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 -Set the ReJoin data transmission interval to 60000ms = 60 seconds
1264 -)))
1265 -
1266 -{{info}}
1267 -**Downlink Command: 0x26**
1268 -{{/info}}
1269 -
1270 -Format: Command Code (0x26) followed by 2 bytes mode value.
1271 -
1272 -If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1273 -
1274 -* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 -* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1276 -
1277 1277  = 8. AT Commands Combination =
1278 1278  
1279 1279  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1289,7 +1289,6 @@
1289 1289  
1290 1290  Same as:
1291 1291  
1292 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1293 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1294 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1295 -~)~)~)
1015 +* AT+ADR=0 [[Reference>>http://8.211.40.43:8080/xwiki/bin/view/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#Adaptive_Data_Rate]]
1016 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
1017 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0