Last modified by kai on 2024/09/06 10:00
<
From version < 50.3 >
edited by Xiaoling
on 2022/07/13 11:50
To version < 60.7 >
edited by Xiaoling
on 2023/03/27 14:07
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -9,25 +9,25 @@
9 9  
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 -* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
13 -* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
12 +* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 +* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 15  (((
16 16  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17 -
18 18  )))
19 19  
19 +
20 20  = 2. How to use AT Commands or Downlink command =
21 21  
22 22  
23 -* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 -* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 +* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 +* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
25 25  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
27 27  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
28 28  
29 +(% style="display:none" %) (%%)
29 29  
30 -
31 31  = 3. Support End Node and firmware version =
32 32  
33 33  
... ... @@ -102,20 +102,18 @@
102 102  )))
103 103  )))
104 104  
105 +(% style="display:none" %) (%%)
105 105  
106 106  = 4. System Management Commands =
107 107  
108 -
109 109  == 4.1 Change Uplink Interval ==
110 110  
111 111  
112 112  Feature: Change LoRaWAN End Node Transmit Interval.
113 113  
114 -(% class="box infomessage" %)
115 -(((
116 -**AT Command: AT+TDC**
117 -)))
118 118  
115 +(% style="color:blue" %)**AT Command: AT+TDC**
116 +
119 119  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
120 120  |=(% colspan="3" style="width: 724px;" %)AT+TDC
121 121  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
... ... @@ -128,35 +128,35 @@
128 128  Set transmit interval to 60000ms = 60 seconds
129 129  )))
130 130  
131 -{{info}}
132 -**Downlink Command: 0x01**
133 -{{/info}}
134 -
135 135  (((
130 +
131 +
132 +(% style="color:blue" %)**Downlink Command: 0x01**
133 +
136 136  Format: Command Code (0x01) followed by 3 bytes time value.
137 137  )))
138 138  
139 139  (((
140 -If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
138 +If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
141 141  )))
142 142  
143 -* **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
144 -* **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
141 +* **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
142 +* **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
145 145  
144 +(% style="display:none" %) (%%)
146 146  
147 -
148 148  == 4.2 Reboot End Node ==
149 149  
148 +
150 150  Feature: Reboot End Node to perform a new OTAA or ABP Join.
151 151  
152 -{{info}}
153 -**AT Command: ATZ**
154 -{{/info}}
155 155  
156 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
157 -|=(% colspan="3" %)ATZ: Trig a reset of the MCU
158 -|**Command Example**|**Function**|**Response**
159 -|ATZ|Reset MCU|(((
152 +(% style="color:blue" %)**AT Command: ATZ**
153 +
154 +(% border="1" style="background-color:#ffffcc; color:green; width:546px" %)
155 +|=(% colspan="3" style="width: 543px;" %)ATZ: Trig a reset of the MCU
156 +|(% style="width:157px" %)**Command Example**|(% style="width:92px" %)**Function**|(% style="width:294px" %)**Response**
157 +|(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
160 160  Device reset and show booting info
161 161  
162 162  LSN50 Device/LoRa ST Module
... ... @@ -170,9 +170,7 @@
170 170  <followed by the Tx and Rx information>
171 171  )))
172 172  
173 -{{info}}
174 -**Downlink Command: 0x04**
175 -{{/info}}
171 +(% style="color:blue" %)**Downlink Command: 0x04**
176 176  
177 177  (((
178 178  Format: Command Code (0x04) followed by FF.
... ... @@ -179,23 +179,22 @@
179 179  )))
180 180  
181 181  (((
182 -If the downlink payload=**04FF**, the end node will reboot.
183 -
184 -
178 +If the downlink payload=**04FF**, the end node will reboot.
185 185  )))
186 186  
181 +
187 187  == 4.3 Reset to factory Default ==
188 188  
184 +
189 189  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
190 190  
191 -{{info}}
192 -**AT Command: AT+FDR**
193 -{{/info}}
194 194  
195 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
196 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default
197 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
198 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
188 +(% style="color:blue" %)**AT Command: AT+FDR**
189 +
190 +(% border="1" style="background-color:#ffffcc; color:green; width:789px" %)
191 +|=(% colspan="3" style="width: 786px;" %)Reset to factory default
192 +|(% style="width:154px" %)**Command Example**|(% style="width:175px" %)**Function**|(% style="width:456px" %)**Response**
193 +|(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
199 199  Device reset to factory default parameters and show booting info
200 200  
201 201  LSN50 Device/LoRa ST Module
... ... @@ -209,9 +209,7 @@
209 209  Please set the parameters or reset Device to apply change
210 210  )))
211 211  
212 -{{info}}
213 -**Downlink Command: 0x04**
214 -{{/info}}
207 +(% style="color:blue" %)**Downlink Command: 0x04**
215 215  
216 216  (((
217 217  Format: Command Code (0x04) followed by FE.
... ... @@ -224,24 +224,22 @@
224 224  
225 225  == 4.4 Show Firmware Version ==
226 226  
220 +
227 227  Feature: Show firmware version. No downlink command yet.
228 228  
229 -{{info}}
230 -**AT Command: AT+VER**
231 -{{/info}}
232 232  
233 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
234 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
235 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
236 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
224 +(% style="color:blue" %)**AT Command: AT+VER**
225 +
226 +(% border="1" style="background-color:#ffffcc; color:green; width:542px" %)
227 +|=(% colspan="3" style="width: 539px;" %)AT+VER: Image Version and Frequency Band
228 +|(% style="width:157px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:86px" %)**Response**
229 +|(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
237 237  1.3 EU868
238 238  
239 239  OK
240 240  )))
241 241  
242 -{{info}}
243 -**Downlink Command: 0x26 (Valid in 006 stack)**
244 -{{/info}}
235 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
245 245  
246 246  (((
247 247  Downlink Format: 0x26
... ... @@ -252,6 +252,8 @@
252 252  )))
253 253  
254 254  (((
246 +
247 +
255 255  **xx: Software Type:**
256 256  )))
257 257  
... ... @@ -260,6 +260,8 @@
260 260  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
261 261  
262 262  (((
256 +
257 +
263 263  **yy: Frequency Band:**
264 264  )))
265 265  
... ... @@ -275,6 +275,8 @@
275 275  * 0xa0: AS923-3
276 276  
277 277  (((
273 +
274 +
278 278  **zz: Subband**
279 279  )))
280 280  
... ... @@ -283,12 +283,12 @@
283 283  
284 284  == 4.5 Show System Configure ==
285 285  
283 +
286 286  Feature: Show All configure. No downlink command yet.
287 287  
288 -{{info}}
289 -**AT Command: AT+CFG**
290 -{{/info}}
291 291  
287 +(% style="color:blue" %)**AT Command: AT+CFG**
288 +
292 292  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
293 293  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
294 294  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -310,12 +310,12 @@
310 310  
311 311  == 5.1 Application EUI ==
312 312  
310 +
313 313  Feature: Get or Set the Application EUI.
314 314  
315 -{{info}}
316 -**AT Command: AT+APPEUI**
317 -{{/info}}
318 318  
314 +(% style="color:blue" %)**AT Command: AT+APPEUI**
315 +
319 319  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
320 320  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
321 321  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -324,14 +324,16 @@
324 324  )))
325 325  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
326 326  
324 +(% style="display:none" %) (%%)
325 +
327 327  == 5.2 Application Key ==
328 328  
328 +
329 329  Feature: Get or Set the Application Key.
330 330  
331 -{{info}}
332 -**AT Command: AT+APPKEY**
333 -{{/info}}
334 334  
332 +(% style="color:blue" %)**AT Command: AT+APPKEY**
333 +
335 335  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
336 336  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
337 337  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -340,14 +340,16 @@
340 340  )))
341 341  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
342 342  
342 +(% style="display:none" %) (%%)
343 +
343 343  == 5.3 Application Session Key ==
344 344  
346 +
345 345  Feature: Get or Set the Application Session Key.
346 346  
347 -{{info}}
348 -**AT Command: AT+APPSKEY**
349 -{{/info}}
350 350  
350 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
351 +
351 351  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
352 352  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
353 353  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -358,14 +358,16 @@
358 358  OK
359 359  )))
360 360  
362 +(% style="display:none" %) (%%)
363 +
361 361  == 5.4 Device Address ==
362 362  
366 +
363 363  Feature: Get or Set the Device Address.
364 364  
365 -{{info}}
366 -**AT Command: AT+DADDR**
367 -{{/info}}
368 368  
370 +(% style="color:blue" %)**AT Command: AT+DADDR**
371 +
369 369  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
370 370  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
371 371  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -376,14 +376,16 @@
376 376  )))
377 377  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
378 378  
382 +(% style="display:none" %) (%%)
383 +
379 379  == 5.5 Device EUI ==
380 380  
386 +
381 381  Feature: Get or Set the Device EUI.
382 382  
383 -{{info}}
384 -**AT Command: AT+DEUI**
385 -{{/info}}
386 386  
390 +(% style="color:blue" %)**AT Command: AT+DEUI**
391 +
387 387  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
388 388  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
389 389  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -394,14 +394,16 @@
394 394  OK
395 395  )))
396 396  
402 +(% style="display:none" %) (%%)
403 +
397 397  == 5.6 Network ID ==
398 398  
406 +
399 399  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
400 400  
401 -{{info}}
402 -**AT Command: AT+NWKID**
403 -{{/info}}
404 404  
410 +(% style="color:blue" %)**AT Command: AT+NWKID**
411 +
405 405  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
406 406  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
407 407  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -410,14 +410,16 @@
410 410  )))
411 411  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
412 412  
420 +(% style="display:none" %) (%%)
421 +
413 413  == 5.7 Network Session Key ==
414 414  
424 +
415 415  Feature: Get or Set the Network Session Key
416 416  
417 -{{info}}
418 -**AT Command: AT+NWKSKEY**
419 -{{/info}}
420 420  
428 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
429 +
421 421  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
422 422  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
423 423  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -426,18 +426,20 @@
426 426  )))
427 427  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
428 428  
438 +(% style="display:none" %) (%%)
439 +
429 429  = 6. Joining and sending date on LoRaWAN network =
430 430  
431 431  == 6.1 Confirm Mode ==
432 432  
433 -=== AT+CFM command before DR-LWS007 software stack ===
444 +=== 6.1.1  AT+CFM command before DR-LWS007 software stack ===
434 434  
446 +
435 435  Feature: Get or Set the confirmation mode (0-1).
436 436  
437 -{{info}}
438 -**AT Command: AT+CFM**
439 -{{/info}}
440 440  
450 +(% style="color:blue" %)**AT Command: AT+CFM**
451 +
441 441  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
442 442  |=(% colspan="3" style="width: 707px;" %)AT+CFM
443 443  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -447,21 +447,22 @@
447 447  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
448 448  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
449 449  
450 -Downlink Command: 0x05
461 +(% style="color:blue" %)**Downlink Command: 0x05**
451 451  
452 452  Format: Command Code (0x05) followed by 2 bytes mode value.
453 453  
454 454  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
455 455  
456 -* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
457 -* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
467 +* **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
468 +* **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
458 458  
459 -=== AT+CFM command since DR-LWS007 software stack ===
470 +(% style="display:none" %) (%%)
460 460  
461 -{{info}}
462 -**AT Command: AT+CFM**
463 -{{/info}}
472 +=== 6.1.2  AT+CFM command since DR-LWS007 software stack ===
464 464  
474 +
475 +(% style="color:blue" %)**AT Command: AT+CFM**
476 +
465 465  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
466 466  |=(% colspan="3" style="width: 707px;" %)AT+CFM
467 467  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -493,40 +493,40 @@
493 493  OK
494 494  )))
495 495  
496 -{{info}}
497 -**Downlink Command: 0x05**
498 -{{/info}}
508 +(% style="color:blue" %)**Downlink Command: 0x05**
499 499  
500 500  Format: Command Code (0x05) followed by 2 bytes mode value.
501 501  
502 502  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
503 503  
504 -* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
505 -* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
514 +* **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
515 +* **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
506 506  
517 +(% style="display:none" %) (%%)
518 +
507 507  == 6.2 Confirm Status ==
508 508  
521 +
509 509  Feature: Get confirmation status of the last AT+SEND (0-1).
510 510  
511 -{{info}}
512 -**AT Command: AT+CFS**
513 -{{/info}}
514 514  
515 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
516 -|=(% colspan="3" style="width: 531px;" %)AT+CFS
517 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
518 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
525 +(% style="color:blue" %)**AT Command: AT+CFS**
526 +
527 +(% border="1" style="background-color:#ffffcc; color:green; width:463px" %)
528 +|=(% colspan="3" style="width: 460px;" %)AT+CFS
529 +|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:107px" %)**Response**
530 +|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
519 519  OK
520 520  )))
521 521  
522 522  == 6.3 Join LoRa® Network ==
523 523  
536 +
524 524  Feature: Join network.
525 525  
526 -{{info}}
527 -**AT Command: AT+JOIN**
528 -{{/info}}
529 529  
540 +(% style="color:blue" %)**AT Command: AT+JOIN**
541 +
530 530  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
531 531  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
532 532  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -538,12 +538,12 @@
538 538  
539 539  == 6.4 LoRa® Network Join Mode ==
540 540  
553 +
541 541  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
542 542  
543 -{{info}}
544 -**AT Command: AT+NJM**
545 -{{/info}}
546 546  
557 +(% style="color:blue" %)**AT Command: AT+NJM**
558 +
547 547  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
548 548  |=(% colspan="3" style="width: 750px;" %)AT+NJM
549 549  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -553,25 +553,25 @@
553 553  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
554 554  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
555 555  
556 -{{info}}
557 -**Downlink Command: 0x20**
558 -{{/info}}
568 +(% style="color:blue" %)**Downlink Command: 0x20**
559 559  
560 560  Format: Command Code (0x20) followed by 1 bytes mode value.
561 561  
562 562  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
563 563  
564 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
565 -* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
574 +* **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
575 +* **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
566 566  
577 +(% style="display:none" %) (%%)
578 +
567 567  == 6.5 LoRa® Network Join Status ==
568 568  
581 +
569 569  Feature: LoRa® Network Join Status.
570 570  
571 -{{info}}
572 -**AT Command: AT+NJS**
573 -{{/info}}
574 574  
585 +(% style="color:blue" %)**AT Command: AT+NJS**
586 +
575 575  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
576 576  |=(% colspan="3" style="width: 495px;" %)AT+NJS
577 577  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -579,14 +579,16 @@
579 579  OK
580 580  )))
581 581  
594 +(% style="display:none" %) (%%)
595 +
582 582  == 6.6 Print Last Received Data in Raw Format ==
583 583  
598 +
584 584  Feature: Print Last Received Data in Raw Format<port:data>.
585 585  
586 -{{info}}
587 -**AT Command: AT+RECV**
588 -{{/info}}
589 589  
602 +(% style="color:blue" %)**AT Command: AT+RECV**
603 +
590 590  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
591 591  |=(% colspan="3" style="width: 584px;" %)AT+RECV
592 592  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -594,14 +594,16 @@
594 594  OK
595 595  )))
596 596  
611 +(% style="display:none" %) (%%)
612 +
597 597  == 6.7 Print Last Received Data in Binary Format ==
598 598  
615 +
599 599  Feature: Print Last Received Data in Binary Format<port:data>.
600 600  
601 -{{info}}
602 -**AT Command: AT+RECVB**
603 -{{/info}}
604 604  
619 +(% style="color:blue" %)**AT Command: AT+RECVB**
620 +
605 605  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
606 606  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
607 607  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -609,53 +609,54 @@
609 609  OK
610 610  )))
611 611  
628 +(% style="display:none" %) (%%)
629 +
612 612  == 6.8 Send Text Data ==
613 613  
632 +
614 614  Feature: Send Text Data<port:data>.
615 615  
616 -{{info}}
617 -**AT Command: AT+SEND**
618 -{{/info}}
619 619  
636 +(% style="color:blue" %)**AT Command: AT+SEND**
637 +
620 620  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
621 621  |=(% colspan="3" style="width: 988px;" %)AT+SEND
622 622  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
623 623  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
624 624  While Error in format, return
625 -
626 626  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
627 -
628 -
629 629  )))
630 630  
646 +(% style="display:none" %) (%%)
647 +
631 631  == 6.9 Send Hexadecimal Data ==
632 632  
650 +
633 633  Feature: Send hexadecimal data along with the application port.
634 634  
635 -{{info}}
636 -**AT Command: AT+SENDB**
637 -{{/info}}
638 638  
639 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
640 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
641 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
642 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
643 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
644 -AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
654 +(% style="color:blue" %)**AT Command: AT+SENDB**
645 645  
646 -
656 +(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
657 +|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
658 +|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
659 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
660 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
661 +AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
647 647  )))
648 648  
664 +(% style="display:none" %) (%%)
665 +
649 649  = 7. LoRaWAN network management =
650 650  
651 651  == 7.1 Adaptive Data Rate ==
652 652  
670 +
653 653  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
654 654  
655 -{{info}}
656 -**AT Command: AT+ADR**
657 -{{/info}}
658 658  
674 +(% style="color:blue" %)**AT Command: AT+ADR**
675 +
659 659  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
660 660  |=(% colspan="3" style="width: 680px;" %)AT+ADR
661 661  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -667,24 +667,23 @@
667 667  AT_PARAM_ERROR
668 668  )))
669 669  
670 -{{info}}
671 -**Downlink Command: 0x22**
672 -{{/info}}
687 +(% style="color:blue" %)**Downlink Command: 0x22**
673 673  
674 -
675 675  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
676 676  
677 -* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
678 -* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
691 +* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
692 +* **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
679 679  
694 +(% style="display:none" %) (%%)
695 +
680 680  == 7.2 LoRa® Class ==
681 681  
698 +
682 682  Feature: Get or Set the Device Class(Currently only support class A, class C).
683 683  
684 -{{info}}
685 -**AT Command:AT+CLASS**
686 -{{/info}}
687 687  
702 +(% style="color:blue" %)**AT Command:  AT+CLASS**
703 +
688 688  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
689 689  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
690 690  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -692,17 +692,18 @@
692 692  OK
693 693  )))
694 694  |(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((
695 -
696 696  )))
697 697  
713 +(% style="display:none" %) (%%)
714 +
698 698  == 7.3 Duty Cycle Setting ==
699 699  
700 -Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
701 701  
702 -{{info}}
703 -**AT Command:AT+DCS**
704 -{{/info}}
718 +Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
705 705  
720 +
721 +(% style="color:blue" %)**AT Command:  AT+DCS**
722 +
706 706  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
707 707  |=(% colspan="3" style="width: 512px;" %)AT+DCS
708 708  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -710,17 +710,23 @@
710 710  OK
711 711  )))
712 712  |(% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((
713 -
714 714  )))
715 715  
732 +(% style="display:none" %) (%%)
733 +
716 716  == 7.4 Data Rate ==
717 717  
718 -Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
719 719  
720 -{{info}}
721 -**AT Command: AT+DR**
722 -{{/info}}
737 +Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
723 723  
739 +(% style="color:red" %)
740 +**Notice:**
741 +
742 +* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
743 +* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
744 +
745 +(% style="color:blue" %)**AT Command: AT+DR**
746 +
724 724  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
725 725  |=(% colspan="3" style="width: 463px;" %)AT+DR
726 726  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -731,24 +731,23 @@
731 731  
732 732  )))
733 733  
734 -{{info}}
735 -**Downlink Command: 0x2200aaFF**
736 -{{/info}}
757 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
737 737  
738 -
739 739  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
740 740  
741 -* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
742 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
761 +* **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
762 +* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
743 743  
764 +(% style="display:none" %) (%%)
765 +
744 744  == 7.5 Frame Counter Downlink ==
745 745  
768 +
746 746  Feature: Get or Set the Frame Counter Downlink.
747 747  
748 -{{info}}
749 -**AT Command:AT+FCD**
750 -{{/info}}
751 751  
772 +(% style="color:blue" %)**AT Command:  AT+FCD**
773 +
752 752  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
753 753  |=(% colspan="3" style="width: 690px;" %)AT+FCD
754 754  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -757,8 +757,6 @@
757 757  )))
758 758  |(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
759 759  OK
760 -
761 -
762 762  )))
763 763  
764 764  == 7.6 Frame Counter Uplink ==
... ... @@ -765,10 +765,9 @@
765 765  
766 766  Feature: Get or Set the Frame Counter Uplink.
767 767  
768 -{{info}}
769 -**AT Command:AT+FCU**
770 -{{/info}}
771 771  
789 +(% style="color:blue" %)**AT Command:  AT+FCU**
790 +
772 772  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
773 773  |=(% colspan="3" style="width: 531px;" %)AT+FCU
774 774  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -776,17 +776,18 @@
776 776  OK
777 777  )))
778 778  |(% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((
779 -
780 780  )))
781 781  
800 +(% style="display:none" %) (%%)
801 +
782 782  == 7.7 Join Accept Delay1 ==
783 783  
804 +
784 784  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
785 785  
786 -{{info}}
787 -**AT Command:AT+JN1DL**
788 -{{/info}}
789 789  
808 +(% style="color:blue" %)**AT Command:  AT+JN1DL**
809 +
790 790  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
791 791  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
792 792  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -794,17 +794,18 @@
794 794  OK
795 795  )))
796 796  |(% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((
797 -
798 798  )))
799 799  
819 +(% style="display:none" %) (%%)
820 +
800 800  == 7.8 Join Accept Delay2 ==
801 801  
823 +
802 802  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
803 803  
804 -{{info}}
805 -**AT Command:AT+JN2DL**
806 -{{/info}}
807 807  
827 +(% style="color:blue" %)**AT Command:  AT+JN2DL**
828 +
808 808  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
809 809  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
810 810  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -812,19 +812,20 @@
812 812  OK
813 813  )))
814 814  |(% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((
815 -
816 816  )))
817 817  
838 +(% style="display:none" %) (%%)
839 +
818 818  == 7.9 Public Network Mode ==
819 819  
842 +
820 820  Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
821 821  
822 -Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
845 +(% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
823 823  
824 -{{info}}
825 -**AT Command:AT+PNM**
826 -{{/info}}
827 827  
848 +(% style="color:blue" %)**AT Command:  AT+PNM**
849 +
828 828  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
829 829  |=(% colspan="3" style="width: 664px;" %)AT+PNM
830 830  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -842,14 +842,16 @@
842 842  )))
843 843  |(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
844 844  
867 +(% style="display:none" %) (%%)
868 +
845 845  == 7.10 Receive Delay1 ==
846 846  
871 +
847 847  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
848 848  
849 -{{info}}
850 -**AT Command:AT+RX1DL**
851 -{{/info}}
852 852  
875 +(% style="color:blue" %)**AT Command: AT+RX1DL**
876 +
853 853  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
854 854  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
855 855  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -857,17 +857,18 @@
857 857  OK
858 858  )))
859 859  |(% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((
860 -
861 861  )))
862 862  
886 +(% style="display:none" %) (%%)
887 +
863 863  == 7.11 Receive Delay2 ==
864 864  
890 +
865 865  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
866 866  
867 -{{info}}
868 -**AT Command:AT+RX2DL**
869 -{{/info}}
870 870  
894 +(% style="color:blue" %)**AT Command: AT+RX2DL**
895 +
871 871  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
872 872  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
873 873  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -875,17 +875,18 @@
875 875  OK
876 876  )))
877 877  |(% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((
878 -
879 879  )))
880 880  
905 +(% style="display:none" %) (%%)
906 +
881 881  == 7.12 Rx2 Window Data Rate ==
882 882  
909 +
883 883  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
884 884  
885 -{{info}}
886 -**AT Command:AT+RX2DR**
887 -{{/info}}
888 888  
913 +(% style="color:blue" %)**AT Command:  AT+RX2DR**
914 +
889 889  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
890 890  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
891 891  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -893,17 +893,18 @@
893 893  OK
894 894  )))
895 895  |(% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((
896 -
897 897  )))
898 898  
924 +(% style="display:none" %) (%%)
925 +
899 899  == 7.13 Rx2 Window Frequency ==
900 900  
928 +
901 901  Feature: Get or Set the Rx2 window frequency
902 902  
903 -{{info}}
904 -**AT Command:AT+RX2FQ**
905 -{{/info}}
906 906  
932 +(% style="color:blue" %)**AT Command:  AT+RX2FQ**
933 +
907 907  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
908 908  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
909 909  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -911,17 +911,20 @@
911 911  OK
912 912  )))
913 913  |(% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((
914 -
915 915  )))
916 916  
943 +(% style="display:none" %) (%%)
944 +
917 917  == 7.14 Transmit Power ==
918 918  
947 +
919 919  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
920 920  
921 -{{info}}
922 -**AT Command:AT+TXP**
923 -{{/info}}
950 +(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
924 924  
952 +
953 +(% style="color:blue" %)**AT Command:  AT+TXP**
954 +
925 925  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
926 926  |=(% colspan="3" style="width: 462px;" %)AT+TXP
927 927  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -929,7 +929,6 @@
929 929  OK
930 930  )))
931 931  |(% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((
932 -
933 933  )))
934 934  
935 935  Downlink Payload. The 4th byte of 0x22 downlink.
... ... @@ -936,17 +936,19 @@
936 936  
937 937  If the downlink payload=22000100, it means setting the TXP to 0.
938 938  
939 -* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
940 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
968 +* **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
969 +* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+TXP=0.
941 941  
971 +(% style="display:none" %) (%%)
972 +
942 942  == 7.15 RSSI of the Last Received Packet ==
943 943  
975 +
944 944  Feature: Get or Set the Rx2 window frequency
945 945  
946 -{{info}}
947 -**AT Command:AT+RSSI**
948 -{{/info}}
949 949  
979 +(% style="color:blue" %)**AT Command:AT+RSSI**
980 +
950 950  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
951 951  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
952 952  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -954,14 +954,16 @@
954 954  OK
955 955  )))
956 956  
988 +(% style="display:none" %) (%%)
989 +
957 957  == 7.16 SNR of the Last Received Packet ==
958 958  
992 +
959 959  Feature: Get the SNR of the last received packet
960 960  
961 -{{info}}
962 -**AT Command:AT+SNR**
963 -{{/info}}
964 964  
996 +(% style="color:blue" %)**AT Command:  AT+SNR**
997 +
965 965  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
966 966  |=(% colspan="3" style="width: 568px;" %)AT+SNR
967 967  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -969,14 +969,16 @@
969 969  OK
970 970  )))
971 971  
1005 +(% style="display:none" %) (%%)
1006 +
972 972  == 7.17 Application Port ==
973 973  
1009 +
974 974  Feature: Get or set the application port.
975 975  
976 -{{info}}
977 -**AT Command: AT+PORT**
978 -{{/info}}
979 979  
1013 +(% style="color:blue" %)**AT Command: AT+PORT**
1014 +
980 980  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
981 981  |=(% colspan="3" style="width: 497px;" %)AT+PORT
982 982  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
... ... @@ -985,25 +985,25 @@
985 985  )))
986 986  |(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
987 987  
988 -{{info}}
989 -**Downlink Command: 0x23**
990 -{{/info}}
1023 +(% style="color:blue" %)**Downlink Command: 0x23**
991 991  
992 992  Format: Command Code (0x23) followed by 1 bytes port value.
993 993  
994 994  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
995 995  
996 -* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
997 -* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
1029 +* **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1030 +* **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
998 998  
1032 +(% style="display:none" %) (%%)
1033 +
999 999  == 7.18 Single Channel Mode ==
1000 1000  
1036 +
1001 1001  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
1002 1002  
1003 -{{info}}
1004 -**AT Command: AT+CHS**
1005 -{{/info}}
1006 1006  
1040 +(% style="color:blue" %)**AT Command: AT+CHS**
1041 +
1007 1007  (% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
1008 1008  |=(% colspan="3" style="width: 600px;" %)AT+CHS
1009 1009  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -1012,14 +1012,16 @@
1012 1012  )))
1013 1013  |(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
1014 1014  
1050 +(% style="display:none" %) (%%)
1051 +
1015 1015  == 7.19 Eight Channel Mode ==
1016 1016  
1054 +
1017 1017  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1018 1018  
1019 -{{info}}
1020 -**AT Command: AT+CHE**
1021 -{{/info}}
1022 1022  
1058 +(% style="color:blue" %)**AT Command: AT+CHE**
1059 +
1023 1023  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1024 1024  |=(% colspan="3" style="width: 707px;" %)AT+CHE
1025 1025  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -1030,25 +1030,25 @@
1030 1030  )))
1031 1031  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1032 1032  
1033 -{{info}}
1034 -**Downlink Command: 0x24**
1035 -{{/info}}
1070 +(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
1036 1036  
1037 1037  Format: Command Code (0x24) followed by 1 bytes channel value.
1038 1038  
1039 1039  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1040 1040  
1041 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1042 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
1076 +* **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1077 +* **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1043 1043  
1079 +(% style="display:none" %) (%%)
1080 +
1044 1044  == 7.20 Get or Set RXwindows1 timeout ==
1045 1045  
1046 -Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1047 1047  
1048 -{{info}}
1049 -**AT Command: AT+RX1WTO**
1050 -{{/info}}
1084 +Feature: Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1051 1051  
1086 +
1087 +(% style="color:blue" %)**AT Command: AT+RX1WTO**
1088 +
1052 1052  (% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1053 1053  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1054 1054  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
... ... @@ -1057,8 +1057,10 @@
1057 1057  )))
1058 1058  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1059 1059  
1097 +(% style="display:none" %) (%%)
1098 +
1060 1060  (((
1061 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1100 +(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1062 1062  )))
1063 1063  
1064 1064  [[image:image-20220526162535-1.png]]
... ... @@ -1065,18 +1065,17 @@
1065 1065  
1066 1066  (((
1067 1067  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1068 -
1069 -
1070 1070  )))
1071 1071  
1109 +
1072 1072  == 7.21 Get or Set RXwindows2 timeout ==
1073 1073  
1074 -Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1075 1075  
1076 -{{info}}
1077 -**AT Command: AT+RX2WTO**
1078 -{{/info}}
1113 +Feature: Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1079 1079  
1115 +
1116 +(% style="color:blue" %)**AT Command: AT+RX2WTO**
1117 +
1080 1080  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1081 1081  |=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1082 1082  |(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
... ... @@ -1085,14 +1085,16 @@
1085 1085  )))
1086 1086  |(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1087 1087  
1126 +(% style="display:none" %) (%%)
1127 +
1088 1088  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1089 1089  
1130 +
1090 1090  Feature: Get or Set uplinkdwelltime
1091 1091  
1092 -{{info}}
1093 -**AT Command: AT+DWELLT**
1094 -{{/info}}
1095 1095  
1134 +(% style="color:blue" %)**AT Command: AT+DWELLT**
1135 +
1096 1096  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1097 1097  |=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1098 1098  |(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
... ... @@ -1101,23 +1101,25 @@
1101 1101  )))
1102 1102  |(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
1103 1103  
1104 -{{info}}
1105 -**Downlink Command: 0x25**
1106 -{{/info}}
1144 +(% style="color:blue" %)**Downlink Command: 0x25**
1107 1107  
1108 1108  Format: Command Code (0x25) followed by 1 bytes state value.
1109 1109  
1110 1110  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1111 1111  
1112 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1113 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1150 +* **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1151 +* **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1114 1114  
1153 +(% style="display:none" %) (%%)
1154 +
1115 1115  == 7.23 Set Packet Receiving Response Level ==
1116 1116  
1157 +
1117 1117  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1118 1118  
1119 -RPL value:
1120 1120  
1161 +**RPL value:**
1162 +
1121 1121  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1122 1122  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1123 1123  * **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
... ... @@ -1124,15 +1124,13 @@
1124 1124  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1125 1125  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1126 1126  
1127 -Case Analyes:
1169 +**Case Analyes:**
1128 1128  
1129 1129  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1130 1130  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1131 1131  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1132 1132  
1133 -{{info}}
1134 -**AT Command: AT+RPL**
1135 -{{/info}}
1175 +(% style="color:blue" %)**AT Command: AT+RPL**
1136 1136  
1137 1137  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1138 1138  |=(% colspan="3" style="width: 533px;" %)AT+RPL
... ... @@ -1142,52 +1142,59 @@
1142 1142  )))
1143 1143  |(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
1144 1144  
1145 -{{info}}
1146 -**Downlink Command: 0x21**
1147 -{{/info}}
1185 +(% style="color:blue" %)**Downlink Command: 0x21**
1148 1148  
1149 1149  Format: Command Code (0x21) followed by 1 bytes level value.
1150 1150  
1151 1151  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1152 1152  
1153 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1154 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1191 +* **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1192 +* **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1155 1155  
1194 +(% style="display:none" %) (%%)
1195 +
1156 1156  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1157 1157  
1158 -{{info}}
1159 -**AT Command: AT+SETMAXNBTRANS **
1160 -{{/info}}
1161 1161  
1162 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1163 -|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1164 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1165 -|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1199 +(% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1200 +
1201 +(% border="1" style="background-color:#ffffcc; color:green; width:589px" %)
1202 +|=(% colspan="3" style="width: 586px;" %)AT+**SETMAXNBTRANS**
1203 +|(% style="width:227px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:87px" %)**Response**
1204 +|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1166 1166  OK
1167 1167  )))
1168 -|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1207 +|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1208 +value2: 0: uplink fcnt doesn't change for each NBTrans;
1209 +
1210 +1: uplink fcnt increase by 1 for each NBTrans.
1211 +)))|(% style="width:87px" %)(((
1169 1169  1
1170 1170  
1171 1171  OK
1172 1172  )))
1173 1173  
1174 -{{info}}
1175 -**Downlink Command: 0x33**
1176 -{{/info}}
1217 +(% style="color:blue" %)**Downlink Command: 0x33**
1177 1177  
1178 1178  Format: Command Code (0x33) followed by 2 bytes mode value.
1179 1179  
1180 1180  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1181 1181  
1182 -* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1183 -* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1223 +* Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1224 +* Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1184 1184  
1226 +(% style="display:none" %) (%%)
1227 +
1185 1185  == 7.25 Device offline rejoining （LWS007) ==
1186 1186  
1187 -{{info}}
1188 -**AT Command: AT+DDETECT**
1189 -{{/info}}
1190 1190  
1231 +(% style="color:blue" %)**AT Command: AT+DDETECT**
1232 +
1233 +AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
1234 +
1235 +* ACK_Timout_1: Unit: min
1236 +* ACK_Timout_2: Unit: min
1237 +
1191 1191  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1192 1192  |=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1193 1193  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -1219,22 +1219,25 @@
1219 1219  OK
1220 1220  )))
1221 1221  
1222 -{{info}}
1223 -**Downlink Command: 0x33**
1224 -{{/info}}
1269 +(% style="color:blue" %)**Downlink Command: 0x32**
1225 1225  
1226 1226  Format: Command Code (0x32) followed by 2 bytes mode value.
1227 1227  
1228 -If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1273 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1229 1229  
1230 -* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1275 +* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1276 +** 0x01 : Flag
1277 +** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1278 +** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
1279 +** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1231 1231  
1281 +(% style="display:none" %) (%%)
1282 +
1232 1232  == 7.26 Request the server to send an ACK ==
1233 1233  
1234 -{{info}}
1235 -**AT Command: AT+PNACKMD**
1236 -{{/info}}
1237 1237  
1286 +(% style="color:blue" %)**AT Command: AT+PNACKMD**
1287 +
1238 1238  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1239 1239  |=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1240 1240  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
... ... @@ -1243,55 +1243,60 @@
1243 1243  )))
1244 1244  |(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1245 1245  0
1246 -
1247 1247  OK
1248 1248  )))
1249 1249  
1299 +(% style="display:none" %) (%%)
1300 +
1250 1250  == 7.27 Adjust network rejoining interval ==
1251 1251  
1252 -{{info}}
1253 -**AT Command: AT+RJTDC**
1254 -{{/info}}
1255 1255  
1304 +(% style="color:blue" %)**AT Command: AT+RJTDC**
1305 +
1256 1256  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1257 1257  |=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1258 1258  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1259 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1309 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1260 1260  OK
1261 1261  
1262 -the interval is 30000ms = 30s
1312 +the interval is 30 min
1263 1263  )))
1264 -|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1265 -Set the ReJoin data transmission interval to 60000ms = 60 seconds
1314 +|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1315 +Set the ReJoin data transmission interval to 60 min
1266 1266  )))
1267 1267  
1268 -{{info}}
1269 -**Downlink Command: 0x26**
1270 -{{/info}}
1318 +(% style="color:blue" %)**Downlink Command: 0x26**
1271 1271  
1272 1272  Format: Command Code (0x26) followed by 2 bytes mode value.
1273 1273  
1274 1274  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1275 1275  
1276 -* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1277 -* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1324 +* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1325 +* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1278 1278  
1327 +(% style="display:none" %) (%%)
1328 +
1279 1279  = 8. AT Commands Combination =
1280 1280  
1281 1281  == 8.1 Set a fix RX2DR for downlink window ==
1282 1282  
1283 -* **AT+ADR=0 **~-~-> Disable ADR first
1284 -* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
1285 1285  
1334 +* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1335 +* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1336 +
1337 +(% style="display:none" %) (%%)
1338 +
1286 1286  == 8.2 Use Downlink Command to set a fix uplink DR ==
1287 1287  
1288 -{{info}}
1289 -**Downlink Command: 0x22000500**
1290 -{{/info}}
1291 1291  
1292 -Same as:
1342 +(% style="color:blue" %)**Downlink Command: 0x22000500**
1293 1293  
1294 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1295 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1296 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1297 -~)~)~)
1344 +**Same as:**
1345 +
1346 +* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1347 +
1348 +* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1349 +
1350 +* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1351 +
1352 +

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0