Changes for page End Device AT Commands and Downlink Command

Last modified by kai on 2024/09/06 10:00

From version < 50.3 >

edited by Xiaoling
on 2022/07/13 11:50

To version < 60.6 >

edited by Xiaoling
on 2023/03/27 14:04

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

@@ -9,25 +9,25 @@
  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
--* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
--* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
++* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
++* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
  (((
  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
--
  )))
++
  = 2. How to use AT Commands or Downlink command =
--* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
--* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
++* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
++* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
--** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
++** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
++(% style="display:none" %) (%%)
--
  = 3. Support End Node and firmware version =
@@ -102,20 +102,18 @@
  )))
  )))
++(% style="display:none" %) (%%)
  = 4. System Management Commands =
--
  == 4.1 Change Uplink Interval ==
  Feature: Change LoRaWAN End Node Transmit Interval.
--(% class="box infomessage" %)
--(((
--**AT Command: AT+TDC**
--)))
++(% style="color:blue" %)**AT Command: AT+TDC**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
  |=(% colspan="3" style="width: 724px;" %)AT+TDC
  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
@@ -128,35 +128,35 @@
  Set transmit interval to 60000ms = 60 seconds
  )))
--{{info}}
--**Downlink Command: 0x01**
--{{/info}}
--
  (((
++
++
++(% style="color:blue" %)**Downlink Command: 0x01**
++
  Format: Command Code (0x01) followed by 3 bytes time value.
  )))
  (((
--If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
++If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
  )))
--* **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
--* **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
++* **Example 1**: Downlink Payload:** 0100001E**               ~/~/ Set Transmit Interval (TDC) = 30 seconds
++* **Example 2**: Downlink Payload:** 0100003C**               ~/~/ Set Transmit Interval (TDC) = 60 seconds
++(% style="display:none" %) (%%)
--
  == 4.2 Reboot End Node ==
++
  Feature: Reboot End Node to perform a new OTAA or ABP Join.
--{{info}}
--**AT Command: ATZ**
--{{/info}}
--(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
--|=(% colspan="3" %)ATZ: Trig a reset of the MCU
--|**Command Example**|**Function**|**Response**
--|ATZ|Reset MCU|(((
++(% style="color:blue" %)**AT Command: ATZ**
++
++(% border="1" style="background-color:#ffffcc; color:green; width:546px" %)
++|=(% colspan="3" style="width: 543px;" %)ATZ: Trig a reset of the MCU
++|(% style="width:157px" %)**Command Example**|(% style="width:92px" %)**Function**|(% style="width:294px" %)**Response**
++|(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
  Device reset and show booting info
  LSN50 Device/LoRa ST Module
@@ -170,9 +170,7 @@
  <followed by the Tx and Rx information>
  )))
--{{info}}
--**Downlink Command: 0x04**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x04**
  (((
  Format: Command Code (0x04) followed by FF.
@@ -179,23 +179,22 @@
  )))
  (((
--If the downlink payload=**04FF**, the end node will reboot.
--
--
++If the downlink payload=**04FF**, the end node will reboot.
  )))
++
  == 4.3 Reset to factory Default ==
++
  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
--{{info}}
--**AT Command: AT+FDR**
--{{/info}}
--(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
--|=(% colspan="3" style="width: 828px;" %)Reset to factory default
--|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
--|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
++(% style="color:blue" %)**AT Command: AT+FDR**
++
++(% border="1" style="background-color:#ffffcc; color:green; width:789px" %)
++|=(% colspan="3" style="width: 786px;" %)Reset to factory default
++|(% style="width:154px" %)**Command Example**|(% style="width:175px" %)**Function**|(% style="width:456px" %)**Response**
++|(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
  Device reset to factory default parameters and show booting info
  LSN50 Device/LoRa ST Module
@@ -209,9 +209,7 @@
  Please set the parameters or reset Device to apply change
  )))
--{{info}}
--**Downlink Command: 0x04**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x04**
  (((
  Format: Command Code (0x04) followed by FE.
@@ -224,24 +224,22 @@
  == 4.4 Show Firmware Version ==
++
  Feature: Show firmware version. No downlink command yet.
--{{info}}
--**AT Command: AT+VER**
--{{/info}}
--(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
--|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
--|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
--|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
++(% style="color:blue" %)**AT Command: AT+VER**
++
++(% border="1" style="background-color:#ffffcc; color:green; width:542px" %)
++|=(% colspan="3" style="width: 539px;" %)AT+VER: Image Version and Frequency Band
++|(% style="width:157px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:86px" %)**Response**
++|(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
 .3 EU868
  OK
  )))
--{{info}}
--**Downlink Command: 0x26 (Valid in 006 stack)**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
  (((
  Downlink Format: 0x26
@@ -252,6 +252,8 @@
  )))
  (((
++
++
  **xx: Software Type:**
  )))
@@ -260,6 +260,8 @@
  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
  (((
++
++
  **yy: Frequency Band:**
  )))
@@ -275,6 +275,8 @@
  * 0xa0: AS923-3
  (((
++
++
  **zz: Subband**
  )))
@@ -283,12 +283,12 @@
  == 4.5 Show System Configure ==
++
  Feature: Show All configure. No downlink command yet.
--{{info}}
--**AT Command: AT+CFG**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+CFG**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
@@ -310,12 +310,12 @@
  == 5.1 Application EUI ==
++
  Feature: Get or Set the Application EUI.
--{{info}}
--**AT Command: AT+APPEUI**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+APPEUI**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
@@ -324,14 +324,16 @@
  )))
  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
++(% style="display:none" %) (%%)
++
  == 5.2 Application Key ==
++
  Feature: Get or Set the Application Key.
--{{info}}
--**AT Command: AT+APPKEY**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+APPKEY**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
@@ -340,14 +340,16 @@
  )))
  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
++(% style="display:none" %) (%%)
++
  == 5.3 Application Session Key ==
++
  Feature: Get or Set the Application Session Key.
--{{info}}
--**AT Command: AT+APPSKEY**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+APPSKEY**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
@@ -358,14 +358,16 @@
  OK
  )))
++(% style="display:none" %) (%%)
++
  == 5.4 Device Address ==
++
  Feature: Get or Set the Device Address.
--{{info}}
--**AT Command: AT+DADDR**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+DADDR**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
@@ -376,14 +376,16 @@
  )))
  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
++(% style="display:none" %) (%%)
++
  == 5.5 Device EUI ==
++
  Feature: Get or Set the Device EUI.
--{{info}}
--**AT Command: AT+DEUI**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+DEUI**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
@@ -394,14 +394,16 @@
  OK
  )))
++(% style="display:none" %) (%%)
++
  == 5.6 Network ID ==
++
  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
--{{info}}
--**AT Command: AT+NWKID**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+NWKID**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
@@ -410,14 +410,16 @@
  )))
  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
++(% style="display:none" %) (%%)
++
  == 5.7 Network Session Key ==
++
  Feature: Get or Set the Network Session Key
--{{info}}
--**AT Command: AT+NWKSKEY**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+NWKSKEY**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
@@ -426,18 +426,20 @@
  )))
  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
++(% style="display:none" %) (%%)
++
  = 6. Joining and sending date on LoRaWAN network =
  == 6.1 Confirm Mode ==
--=== AT+CFM command before DR-LWS007 software stack ===
++=== 6.1.1  AT+CFM command before DR-LWS007 software stack ===
++
  Feature: Get or Set the confirmation mode (0-1).
--{{info}}
--**AT Command: AT+CFM**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+CFM**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
  |=(% colspan="3" style="width: 707px;" %)AT+CFM
  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
@@ -447,21 +447,22 @@
  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
--Downlink Command: 0x05
++(% style="color:blue" %)**Downlink Command: 0x05**
  Format: Command Code (0x05) followed by 2 bytes mode value.
  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
--* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
--* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
++* **Example 1:** Downlink Payload: 0501            ~/~/ Set AT+CFM=1
++* **Example 2:** Downlink Payload: 0500            ~/~/ Set AT+CFM=0
--=== AT+CFM command since DR-LWS007 software stack ===
++(% style="display:none" %) (%%)
--{{info}}
--**AT Command: AT+CFM**
--{{/info}}
++=== 6.1.2  AT+CFM command since DR-LWS007 software stack ===
++
++(% style="color:blue" %)**AT Command: AT+CFM**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
  |=(% colspan="3" style="width: 707px;" %)AT+CFM
  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
@@ -493,40 +493,40 @@
  OK
  )))
--{{info}}
--**Downlink Command: 0x05**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x05**
  Format: Command Code (0x05) followed by 2 bytes mode value.
  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
--* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
--* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
++* **Example 1:** Downlink Payload: 05010101           ~/~/ Set AT+CFM=1,1,1
++* **Example 2:** Downlink Payload: 05000700           ~/~/ Set AT+CFM=0,7,0
++(% style="display:none" %) (%%)
++
  == 6.2 Confirm Status ==
++
  Feature: Get confirmation status of the last AT+SEND (0-1).
--{{info}}
--**AT Command: AT+CFS**
--{{/info}}
--(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
--|=(% colspan="3" style="width: 531px;" %)AT+CFS
--|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
--|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
++(% style="color:blue" %)**AT Command: AT+CFS**
++
++(% border="1" style="background-color:#ffffcc; color:green; width:463px" %)
++|=(% colspan="3" style="width: 460px;" %)AT+CFS
++|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:107px" %)**Response**
++|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
  OK
  )))
  == 6.3 Join LoRa® Network ==
++
  Feature: Join network.
--{{info}}
--**AT Command: AT+JOIN**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+JOIN**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
@@ -538,12 +538,12 @@
  == 6.4 LoRa® Network Join Mode ==
++
  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
--{{info}}
--**AT Command: AT+NJM**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+NJM**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
  |=(% colspan="3" style="width: 750px;" %)AT+NJM
  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
@@ -553,25 +553,25 @@
  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
--{{info}}
--**Downlink Command: 0x20**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x20**
  Format: Command Code (0x20) followed by 1 bytes mode value.
  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
--* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
--* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
++* **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
++* **Example 2:** Downlink Payload: **2001**                   ~/~/ Set AT+NJM=1
++(% style="display:none" %) (%%)
++
  == 6.5 LoRa® Network Join Status ==
++
  Feature: LoRa® Network Join Status.
--{{info}}
--**AT Command: AT+NJS**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+NJS**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
  |=(% colspan="3" style="width: 495px;" %)AT+NJS
  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
@@ -579,14 +579,16 @@
  OK
  )))
++(% style="display:none" %) (%%)
++
  == 6.6 Print Last Received Data in Raw Format ==
++
  Feature: Print Last Received Data in Raw Format<port:data>.
--{{info}}
--**AT Command: AT+RECV**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+RECV**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
  |=(% colspan="3" style="width: 584px;" %)AT+RECV
  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
@@ -594,14 +594,16 @@
  OK
  )))
++(% style="display:none" %) (%%)
++
  == 6.7 Print Last Received Data in Binary Format ==
++
  Feature: Print Last Received Data in Binary Format<port:data>.
--{{info}}
--**AT Command: AT+RECVB**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+RECVB**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
@@ -609,53 +609,54 @@
  OK
  )))
++(% style="display:none" %) (%%)
++
  == 6.8 Send Text Data ==
++
  Feature: Send Text Data<port:data>.
--{{info}}
--**AT Command: AT+SEND**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+SEND**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
  |=(% colspan="3" style="width: 988px;" %)AT+SEND
  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
  While Error in format, return
--
  AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
--
--
  )))
++(% style="display:none" %) (%%)
++
  == 6.9 Send Hexadecimal Data ==
++
  Feature: Send hexadecimal data along with the application port.
--{{info}}
--**AT Command: AT+SENDB**
--{{/info}}
--(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
--|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
--|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
--|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
--|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
--AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
++(% style="color:blue" %)**AT Command: AT+SENDB**
--
++(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
++|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
++|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
++|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
++|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
++AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
  )))
++(% style="display:none" %) (%%)
++
  = 7. LoRaWAN network management =
  == 7.1 Adaptive Data Rate ==
++
  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
--{{info}}
--**AT Command: AT+ADR**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+ADR**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
  |=(% colspan="3" style="width: 680px;" %)AT+ADR
  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
@@ -667,24 +667,23 @@
  AT_PARAM_ERROR
  )))
--{{info}}
--**Downlink Command: 0x22**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x22**
--
  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
--* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
--* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
++* **Example 1**: Downlink Payload: **2201**                       ~/~/ Set AT+ADR=1.
++* **Example 2**: Downlink Payload: **2200FFFF**               ~/~/ Set AT+ADR=0.
++(% style="display:none" %) (%%)
++
  == 7.2 LoRa® Class ==
++
  Feature: Get or Set the Device Class(Currently only support class A, class C).
--{{info}}
--**AT Command:AT+CLASS**
--{{/info}}
++(% style="color:blue" %)**AT Command:  AT+CLASS**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
@@ -692,17 +692,18 @@
  OK
  )))
  |(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((
--
  )))
++(% style="display:none" %) (%%)
++
  == 7.3 Duty Cycle Setting ==
--Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
--{{info}}
--**AT Command:AT+DCS**
--{{/info}}
++Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
++
++(% style="color:blue" %)**AT Command:  AT+DCS**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
  |=(% colspan="3" style="width: 512px;" %)AT+DCS
  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
@@ -710,17 +710,23 @@
  OK
  )))
  |(% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((
--
  )))
++(% style="display:none" %) (%%)
++
  == 7.4 Data Rate ==
--Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
--{{info}}
--**AT Command: AT+DR**
--{{/info}}
++Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
++(% style="color:red" %)
++**Notice:**
++
++* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
++* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
++
++(% style="color:blue" %)**AT Command: AT+DR**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
  |=(% colspan="3" style="width: 463px;" %)AT+DR
  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
@@ -731,24 +731,23 @@
  )))
--{{info}}
--**Downlink Command: 0x2200aaFF**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
--
  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
--* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
--* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
++* **Example 1**: Downlink Payload: **220001FF**                     ~/~/ Set AT+DR=1.
++* **Example 2**: Downlink Payload: **220000FF**                     ~/~/ Set AT+DR=0.
++(% style="display:none" %) (%%)
++
  == 7.5 Frame Counter Downlink ==
++
  Feature: Get or Set the Frame Counter Downlink.
--{{info}}
--**AT Command:AT+FCD**
--{{/info}}
++(% style="color:blue" %)**AT Command:  AT+FCD**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
  |=(% colspan="3" style="width: 690px;" %)AT+FCD
  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
@@ -757,8 +757,6 @@
  )))
  |(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
  OK
--
--
  )))
  == 7.6 Frame Counter Uplink ==
@@ -765,10 +765,9 @@
  Feature: Get or Set the Frame Counter Uplink.
--{{info}}
--**AT Command:AT+FCU**
--{{/info}}
++(% style="color:blue" %)**AT Command:  AT+FCU**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
  |=(% colspan="3" style="width: 531px;" %)AT+FCU
  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
@@ -776,17 +776,18 @@
  OK
  )))
  |(% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((
--
  )))
++(% style="display:none" %) (%%)
++
  == 7.7 Join Accept Delay1 ==
++
  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
--{{info}}
--**AT Command:AT+JN1DL**
--{{/info}}
++(% style="color:blue" %)**AT Command:  AT+JN1DL**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
@@ -794,17 +794,18 @@
  OK
  )))
  |(% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((
--
  )))
++(% style="display:none" %) (%%)
++
  == 7.8 Join Accept Delay2 ==
++
  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
--{{info}}
--**AT Command:AT+JN2DL**
--{{/info}}
++(% style="color:blue" %)**AT Command:  AT+JN2DL**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
@@ -812,19 +812,20 @@
  OK
  )))
  |(% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((
--
  )))
++(% style="display:none" %) (%%)
++
  == 7.9 Public Network Mode ==
++
  Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
--Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
++(% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
--{{info}}
--**AT Command:AT+PNM**
--{{/info}}
++(% style="color:blue" %)**AT Command:  AT+PNM**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
  |=(% colspan="3" style="width: 664px;" %)AT+PNM
  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
@@ -842,14 +842,16 @@
  )))
  |(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
++(% style="display:none" %) (%%)
++
  == 7.10 Receive Delay1 ==
++
  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
--{{info}}
--**AT Command:AT+RX1DL**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+RX1DL**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
@@ -857,17 +857,18 @@
  OK
  )))
  |(% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((
--
  )))
++(% style="display:none" %) (%%)
++
  == 7.11 Receive Delay2 ==
++
  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
--{{info}}
--**AT Command:AT+RX2DL**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+RX2DL**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
@@ -875,17 +875,18 @@
  OK
  )))
  |(% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((
--
  )))
++(% style="display:none" %) (%%)
++
  == 7.12 Rx2 Window Data Rate ==
++
  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
--{{info}}
--**AT Command:AT+RX2DR**
--{{/info}}
++(% style="color:blue" %)**AT Command:  AT+RX2DR**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
@@ -893,17 +893,18 @@
  OK
  )))
  |(% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((
--
  )))
++(% style="display:none" %) (%%)
++
  == 7.13 Rx2 Window Frequency ==
++
  Feature: Get or Set the Rx2 window frequency
--{{info}}
--**AT Command:AT+RX2FQ**
--{{/info}}
++(% style="color:blue" %)**AT Command:  AT+RX2FQ**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
@@ -911,17 +911,20 @@
  OK
  )))
  |(% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((
--
  )))
++(% style="display:none" %) (%%)
++
  == 7.14 Transmit Power ==
++
  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
--{{info}}
--**AT Command:AT+TXP**
--{{/info}}
++(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
++
++(% style="color:blue" %)**AT Command:  AT+TXP**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
  |=(% colspan="3" style="width: 462px;" %)AT+TXP
  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
@@ -929,7 +929,6 @@
  OK
  )))
  |(% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((
--
  )))
  Downlink Payload. The 4th byte of 0x22 downlink.
@@ -936,17 +936,19 @@
  If the downlink payload=22000100, it means setting the TXP to 0.
--* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
--* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
++* **Example 1**: Downlink Payload: **22000102**         ~/~/ Set AT+TXP=2.
++* **Example 2**: Downlink Payload: **220000FF**         ~/~/ Set AT+TXP=0.
++(% style="display:none" %) (%%)
++
  == 7.15 RSSI of the Last Received Packet ==
++
  Feature: Get or Set the Rx2 window frequency
--{{info}}
--**AT Command:AT+RSSI**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+RSSI**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
@@ -954,14 +954,16 @@
  OK
  )))
++(% style="display:none" %) (%%)
++
  == 7.16 SNR of the Last Received Packet ==
++
  Feature: Get the SNR of the last received packet
--{{info}}
--**AT Command:AT+SNR**
--{{/info}}
++(% style="color:blue" %)**AT Command:  AT+SNR**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
  |=(% colspan="3" style="width: 568px;" %)AT+SNR
  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
@@ -969,14 +969,16 @@
  OK
  )))
++(% style="display:none" %) (%%)
++
  == 7.17 Application Port ==
++
  Feature: Get or set the application port.
--{{info}}
--**AT Command: AT+PORT**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+PORT**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
  |=(% colspan="3" style="width: 497px;" %)AT+PORT
  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
@@ -985,25 +985,25 @@
  )))
  |(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
--{{info}}
--**Downlink Command: 0x23**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x23**
  Format: Command Code (0x23) followed by 1 bytes port value.
  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
--* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
--* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
++* **Example 1**: Downlink Payload: **2301**          ~/~/ set the application port to 1
++* **Example 2**: Downlink Payload:** 2305**          ~/~/ set the application port to 5
++(% style="display:none" %) (%%)
++
  == 7.18 Single Channel Mode ==
++
  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
--{{info}}
--**AT Command: AT+CHS**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+CHS**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
  |=(% colspan="3" style="width: 600px;" %)AT+CHS
  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
@@ -1012,14 +1012,16 @@
  )))
  |(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
++(% style="display:none" %) (%%)
++
  == 7.19 Eight Channel Mode ==
++
  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
--{{info}}
--**AT Command: AT+CHE**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+CHE**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
  |=(% colspan="3" style="width: 707px;" %)AT+CHE
  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
@@ -1030,25 +1030,25 @@
  )))
  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
--{{info}}
--**Downlink Command: 0x24**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
  Format: Command Code (0x24) followed by 1 bytes channel value.
  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
--* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
--* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
++* **Example 1**: Downlink Payload: 2401           ~/~/ set channel mode to 1
++* **Example 2**: Downlink Payload: 2405           ~/~/ set channel mode to 5
++(% style="display:none" %) (%%)
++
  == 7.20 Get or Set RXwindows1 timeout ==
--Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
--{{info}}
--**AT Command: AT+RX1WTO**
--{{/info}}
++Feature: Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
++
++(% style="color:blue" %)**AT Command: AT+RX1WTO**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
@@ -1057,8 +1057,9 @@
  )))
  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
++(% style="display:none" %) (%%)
  (((
--**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
++(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
  )))
  [[image:image-20220526162535-1.png]]
@@ -1065,18 +1065,17 @@
  (((
  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
--
--
  )))
++
  == 7.21 Get or Set RXwindows2 timeout ==
--Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
--{{info}}
--**AT Command: AT+RX2WTO**
--{{/info}}
++Feature: Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
++
++(% style="color:blue" %)**AT Command: AT+RX2WTO**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
  |=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
  |(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
@@ -1087,12 +1087,12 @@
  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
++
  Feature: Get or Set uplinkdwelltime
--{{info}}
--**AT Command: AT+DWELLT**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+DWELLT**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
  |=(% colspan="3" style="width: 494px;" %)AT+DWELLT
  |(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
@@ -1101,23 +1101,23 @@
  )))
  |(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
--{{info}}
--**Downlink Command: 0x25**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x25**
  Format: Command Code (0x25) followed by 1 bytes state value.
  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
--* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
--* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
++* **Example 1**: Downlink Payload: **2501**                    ~/~/ set uplinkdwelltime to 1
++* **Example 2**: Downlink Payload: **2500**                    ~/~/ set uplinkdwelltime to 0
  == 7.23 Set Packet Receiving Response Level ==
++
  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
--RPL value:
++**RPL value:**
++
  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
  * **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
@@ -1124,15 +1124,13 @@
  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
--Case Analyes:
++**Case Analyes:**
  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
--{{info}}
--**AT Command: AT+RPL**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+RPL**
  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
  |=(% colspan="3" style="width: 533px;" %)AT+RPL
@@ -1142,52 +1142,55 @@
  )))
  |(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
--{{info}}
--**Downlink Command: 0x21**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x21**
  Format: Command Code (0x21) followed by 1 bytes level value.
  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
--* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
--* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
++* **Example 1**: Downlink Payload: **2101**                ~/~/ set packet receiving response level to 1
++* **Example 2**: Downlink Payload: **2102**                ~/~/ set packet receiving response level to 2
  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
--{{info}}
--**AT Command: AT+SETMAXNBTRANS **
--{{/info}}
--(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
--|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
--|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
--|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
++(% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
++
++(% border="1" style="background-color:#ffffcc; color:green; width:589px" %)
++|=(% colspan="3" style="width: 586px;" %)AT+**SETMAXNBTRANS**
++|(% style="width:227px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:87px" %)**Response**
++|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
  OK
  )))
--|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2:  0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
++|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
++value2:  0: uplink fcnt doesn't change for each NBTrans;
++
++1: uplink fcnt increase by 1 for each NBTrans.
++)))|(% style="width:87px" %)(((
  OK
  )))
--{{info}}
--**Downlink Command: 0x33**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x33**
  Format: Command Code (0x33) followed by 2 bytes mode value.
  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
--* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
--* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
++* Example 1: Downlink Payload: 330100                 ~/~/ Set AT+SETMAXNBTRANS=1,0
++* Example 2: Downlink Payload: 330201                 ~/~/ Set AT+SETMAXNBTRANS=2,1
  == 7.25 Device offline rejoining （LWS007) ==
--{{info}}
--**AT Command: AT+DDETECT**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+DDETECT**
++
++AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
++
++* ACK_Timout_1: Unit: min
++* ACK_Timout_2: Unit: min
++
  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
  |=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
@@ -1219,22 +1219,23 @@
  OK
  )))
--{{info}}
--**Downlink Command: 0x33**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x32**
  Format: Command Code (0x32) followed by 2 bytes mode value.
--If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
++If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
--* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
++* **Example 1:** Downlink Payload: 320105A00B40                     ~/~/ Set AT+DDETECT=1,1440,2880
++** 0x01 : Flag
++** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
++** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
++** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
  == 7.26 Request the server to send an ACK ==
--{{info}}
--**AT Command: AT+PNACKMD**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+PNACKMD**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
  |=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
@@ -1249,49 +1249,47 @@
  == 7.27 Adjust network rejoining interval ==
--{{info}}
--**AT Command: AT+RJTDC**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+RJTDC**
++
  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
  |=(% colspan="3" style="width: 724px;" %)AT+RJTDC
  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
--|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
++|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
  OK
--the interval is 30000ms = 30s
++the interval is 30 min
  )))
--|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
--Set the ReJoin data transmission interval to 60000ms = 60 seconds
++|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
++Set the ReJoin data transmission interval to 60 min
  )))
--{{info}}
--**Downlink Command: 0x26**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x26**
  Format: Command Code (0x26) followed by 2 bytes mode value.
  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
--* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
--* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
++* **Example 1:** Downlink Payload: 26000A                 ~/~/ Set AT+RJTDC=10
++* **Example 2: **Downlink Payload: 260002                 ~/~/ Set AT+RJTDC=2
  = 8. AT Commands Combination =
  == 8.1 Set a fix RX2DR for downlink window ==
--* **AT+ADR=0 **~-~-> Disable ADR first
--* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
++* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
++* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
++
  == 8.2 Use Downlink Command to set a fix uplink DR ==
--{{info}}
--**Downlink Command: 0x22000500**
--{{/info}}
--Same as:
++(% style="color:blue" %)**Downlink Command: 0x22000500**
--* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
--* AT+DR=5    [[Reference>>||anchor="H7.4DataRate"]]
--* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
--~)~)~)
++**Same as:**
++
++* AT+ADR=0    [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
++* AT+DR=5      [[Reference>>||anchor="H7.4DataRate"]]
++* AT+TXP=0     [[Reference>>||anchor="H7.14TransmitPower"]]
++
++

Changes for page End Device AT Commands and Downlink Command

Summary

Details

Applications

Navigation