Last modified by kai on 2024/09/06 10:00
<
From version < 50.2 >
edited by Xiaoling
on 2022/07/13 11:39
To version < 60.3 >
edited by Xiaoling
on 2023/03/27 13:52
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -9,27 +9,28 @@
9 9  
10 10  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11 11  
12 -* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
13 -* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
12 +* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
13 +* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
14 14  
15 15  (((
16 16  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17 -
18 18  )))
19 19  
19 +
20 20  = 2. How to use AT Commands or Downlink command =
21 21  
22 22  
23 -* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 -* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 +* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24 +* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
25 25  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
26 +** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
27 27  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
28 28  
29 +(% style="display:none" %) (%%)
29 29  
30 -
31 31  = 3. Support End Node and firmware version =
32 32  
33 +
33 33  (% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
34 34  |=(% colspan="3" style="width: 963px;" %)(((
35 35  Dragino STM32 base hardware Firmware / LoRaWAN stack list
... ... @@ -105,13 +105,12 @@
105 105  
106 106  == 4.1 Change Uplink Interval ==
107 107  
109 +
108 108  Feature: Change LoRaWAN End Node Transmit Interval.
109 109  
110 -(% class="box infomessage" %)
111 -(((
112 -**AT Command: AT+TDC**
113 -)))
114 114  
113 +(% style="color:blue" %)**AT Command: AT+TDC**
114 +
115 115  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
116 116  |=(% colspan="3" style="width: 724px;" %)AT+TDC
117 117  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
... ... @@ -124,33 +124,33 @@
124 124  Set transmit interval to 60000ms = 60 seconds
125 125  )))
126 126  
127 -{{info}}
128 -**Downlink Command: 0x01**
129 -{{/info}}
130 -
131 131  (((
128 +
129 +
130 +(% style="color:blue" %)**Downlink Command: 0x01**
131 +
132 132  Format: Command Code (0x01) followed by 3 bytes time value.
133 133  )))
134 134  
135 135  (((
136 -If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
136 +If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
137 137  )))
138 138  
139 -* **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
140 -* **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
139 +* **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
140 +* **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
141 141  
142 142  == 4.2 Reboot End Node ==
143 143  
144 +
144 144  Feature: Reboot End Node to perform a new OTAA or ABP Join.
145 145  
146 -{{info}}
147 -**AT Command: ATZ**
148 -{{/info}}
149 149  
150 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
151 -|=(% colspan="3" %)ATZ: Trig a reset of the MCU
152 -|**Command Example**|**Function**|**Response**
153 -|ATZ|Reset MCU|(((
148 +(% style="color:blue" %)**AT Command: ATZ**
149 +
150 +(% border="1" style="background-color:#ffffcc; color:green; width:546px" %)
151 +|=(% colspan="3" style="width: 543px;" %)ATZ: Trig a reset of the MCU
152 +|(% style="width:157px" %)**Command Example**|(% style="width:92px" %)**Function**|(% style="width:294px" %)**Response**
153 +|(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
154 154  Device reset and show booting info
155 155  
156 156  LSN50 Device/LoRa ST Module
... ... @@ -164,9 +164,7 @@
164 164  <followed by the Tx and Rx information>
165 165  )))
166 166  
167 -{{info}}
168 -**Downlink Command: 0x04**
169 -{{/info}}
167 +(% style="color:blue" %)**Downlink Command: 0x04**
170 170  
171 171  (((
172 172  Format: Command Code (0x04) followed by FF.
... ... @@ -180,16 +180,16 @@
180 180  
181 181  == 4.3 Reset to factory Default ==
182 182  
181 +
183 183  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
184 184  
185 -{{info}}
186 -**AT Command: AT+FDR**
187 -{{/info}}
188 188  
189 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
190 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default
191 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
192 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
185 +(% style="color:blue" %)**AT Command: AT+FDR**
186 +
187 +(% border="1" style="background-color:#ffffcc; color:green; width:789px" %)
188 +|=(% colspan="3" style="width: 786px;" %)Reset to factory default
189 +|(% style="width:154px" %)**Command Example**|(% style="width:175px" %)**Function**|(% style="width:456px" %)**Response**
190 +|(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
193 193  Device reset to factory default parameters and show booting info
194 194  
195 195  LSN50 Device/LoRa ST Module
... ... @@ -203,9 +203,7 @@
203 203  Please set the parameters or reset Device to apply change
204 204  )))
205 205  
206 -{{info}}
207 -**Downlink Command: 0x04**
208 -{{/info}}
204 +(% style="color:blue" %)**Downlink Command: 0x04**
209 209  
210 210  (((
211 211  Format: Command Code (0x04) followed by FE.
... ... @@ -218,24 +218,22 @@
218 218  
219 219  == 4.4 Show Firmware Version ==
220 220  
217 +
221 221  Feature: Show firmware version. No downlink command yet.
222 222  
223 -{{info}}
224 -**AT Command: AT+VER**
225 -{{/info}}
226 226  
227 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
228 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
229 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
230 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
221 +(% style="color:blue" %)**AT Command: AT+VER**
222 +
223 +(% border="1" style="background-color:#ffffcc; color:green; width:542px" %)
224 +|=(% colspan="3" style="width: 539px;" %)AT+VER: Image Version and Frequency Band
225 +|(% style="width:157px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:86px" %)**Response**
226 +|(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
231 231  1.3 EU868
232 232  
233 233  OK
234 234  )))
235 235  
236 -{{info}}
237 -**Downlink Command: 0x26 (Valid in 006 stack)**
238 -{{/info}}
232 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
239 239  
240 240  (((
241 241  Downlink Format: 0x26
... ... @@ -246,6 +246,8 @@
246 246  )))
247 247  
248 248  (((
243 +
244 +
249 249  **xx: Software Type:**
250 250  )))
251 251  
... ... @@ -254,6 +254,8 @@
254 254  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
255 255  
256 256  (((
253 +
254 +
257 257  **yy: Frequency Band:**
258 258  )))
259 259  
... ... @@ -269,6 +269,8 @@
269 269  * 0xa0: AS923-3
270 270  
271 271  (((
270 +
271 +
272 272  **zz: Subband**
273 273  )))
274 274  
... ... @@ -277,12 +277,12 @@
277 277  
278 278  == 4.5 Show System Configure ==
279 279  
280 +
280 280  Feature: Show All configure. No downlink command yet.
281 281  
282 -{{info}}
283 -**AT Command: AT+CFG**
284 -{{/info}}
285 285  
284 +(% style="color:blue" %)**AT Command: AT+CFG**
285 +
286 286  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
287 287  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
288 288  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -304,12 +304,12 @@
304 304  
305 305  == 5.1 Application EUI ==
306 306  
307 +
307 307  Feature: Get or Set the Application EUI.
308 308  
309 -{{info}}
310 -**AT Command: AT+APPEUI**
311 -{{/info}}
312 312  
311 +(% style="color:blue" %)**AT Command: AT+APPEUI**
312 +
313 313  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
314 314  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
315 315  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -320,12 +320,12 @@
320 320  
321 321  == 5.2 Application Key ==
322 322  
323 +
323 323  Feature: Get or Set the Application Key.
324 324  
325 -{{info}}
326 -**AT Command: AT+APPKEY**
327 -{{/info}}
328 328  
327 +(% style="color:blue" %)**AT Command: AT+APPKEY**
328 +
329 329  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
330 330  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
331 331  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -336,12 +336,12 @@
336 336  
337 337  == 5.3 Application Session Key ==
338 338  
339 +
339 339  Feature: Get or Set the Application Session Key.
340 340  
341 -{{info}}
342 -**AT Command: AT+APPSKEY**
343 -{{/info}}
344 344  
343 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
344 +
345 345  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
346 346  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
347 347  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -354,12 +354,12 @@
354 354  
355 355  == 5.4 Device Address ==
356 356  
357 +
357 357  Feature: Get or Set the Device Address.
358 358  
359 -{{info}}
360 -**AT Command: AT+DADDR**
361 -{{/info}}
362 362  
361 +(% style="color:blue" %)**AT Command: AT+DADDR**
362 +
363 363  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
364 364  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
365 365  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -372,12 +372,12 @@
372 372  
373 373  == 5.5 Device EUI ==
374 374  
375 +
375 375  Feature: Get or Set the Device EUI.
376 376  
377 -{{info}}
378 -**AT Command: AT+DEUI**
379 -{{/info}}
380 380  
379 +(% style="color:blue" %)**AT Command: AT+DEUI**
380 +
381 381  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
382 382  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
383 383  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -390,12 +390,12 @@
390 390  
391 391  == 5.6 Network ID ==
392 392  
393 +
393 393  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
394 394  
395 -{{info}}
396 -**AT Command: AT+NWKID**
397 -{{/info}}
398 398  
397 +(% style="color:blue" %)**AT Command: AT+NWKID**
398 +
399 399  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
400 400  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
401 401  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -406,12 +406,12 @@
406 406  
407 407  == 5.7 Network Session Key ==
408 408  
409 +
409 409  Feature: Get or Set the Network Session Key
410 410  
411 -{{info}}
412 -**AT Command: AT+NWKSKEY**
413 -{{/info}}
414 414  
413 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
414 +
415 415  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
416 416  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
417 417  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -424,14 +424,14 @@
424 424  
425 425  == 6.1 Confirm Mode ==
426 426  
427 -=== AT+CFM command before DR-LWS007 software stack ===
427 +=== 6.1.1  AT+CFM command before DR-LWS007 software stack ===
428 428  
429 +
429 429  Feature: Get or Set the confirmation mode (0-1).
430 430  
431 -{{info}}
432 -**AT Command: AT+CFM**
433 -{{/info}}
434 434  
433 +(% style="color:blue" %)**AT Command: AT+CFM**
434 +
435 435  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
436 436  |=(% colspan="3" style="width: 707px;" %)AT+CFM
437 437  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -441,21 +441,20 @@
441 441  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
442 442  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
443 443  
444 -Downlink Command: 0x05
444 +(% style="color:blue" %)**Downlink Command: 0x05**
445 445  
446 446  Format: Command Code (0x05) followed by 2 bytes mode value.
447 447  
448 448  If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
449 449  
450 -* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
451 -* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
450 +* **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
451 +* **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
452 452  
453 -=== AT+CFM command since DR-LWS007 software stack ===
453 +=== 6.1.2  AT+CFM command since DR-LWS007 software stack ===
454 454  
455 -{{info}}
456 -**AT Command: AT+CFM**
457 -{{/info}}
458 458  
456 +(% style="color:blue" %)**AT Command: AT+CFM**
457 +
459 459  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
460 460  |=(% colspan="3" style="width: 707px;" %)AT+CFM
461 461  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -487,40 +487,38 @@
487 487  OK
488 488  )))
489 489  
490 -{{info}}
491 -**Downlink Command: 0x05**
492 -{{/info}}
489 +(% style="color:blue" %)**Downlink Command: 0x05**
493 493  
494 494  Format: Command Code (0x05) followed by 2 bytes mode value.
495 495  
496 496  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
497 497  
498 -* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
499 -* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
495 +* **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
496 +* **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
500 500  
501 501  == 6.2 Confirm Status ==
502 502  
500 +
503 503  Feature: Get confirmation status of the last AT+SEND (0-1).
504 504  
505 -{{info}}
506 -**AT Command: AT+CFS**
507 -{{/info}}
508 508  
509 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
510 -|=(% colspan="3" style="width: 531px;" %)AT+CFS
511 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
512 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
504 +(% style="color:blue" %)**AT Command: AT+CFS**
505 +
506 +(% border="1" style="background-color:#ffffcc; color:green; width:463px" %)
507 +|=(% colspan="3" style="width: 460px;" %)AT+CFS
508 +|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:107px" %)**Response**
509 +|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
513 513  OK
514 514  )))
515 515  
516 516  == 6.3 Join LoRa® Network ==
517 517  
515 +
518 518  Feature: Join network.
519 519  
520 -{{info}}
521 -**AT Command: AT+JOIN**
522 -{{/info}}
523 523  
519 +(% style="color:blue" %)**AT Command: AT+JOIN**
520 +
524 524  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
525 525  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
526 526  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -532,12 +532,12 @@
532 532  
533 533  == 6.4 LoRa® Network Join Mode ==
534 534  
532 +
535 535  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
536 536  
537 -{{info}}
538 -**AT Command: AT+NJM**
539 -{{/info}}
540 540  
536 +(% style="color:blue" %)**AT Command: AT+NJM**
537 +
541 541  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
542 542  |=(% colspan="3" style="width: 750px;" %)AT+NJM
543 543  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -547,25 +547,23 @@
547 547  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
548 548  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
549 549  
550 -{{info}}
551 -**Downlink Command: 0x20**
552 -{{/info}}
547 +(% style="color:blue" %)**Downlink Command: 0x20**
553 553  
554 554  Format: Command Code (0x20) followed by 1 bytes mode value.
555 555  
556 556  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
557 557  
558 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
559 -* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
553 +* **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
554 +* **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
560 560  
561 561  == 6.5 LoRa® Network Join Status ==
562 562  
558 +
563 563  Feature: LoRa® Network Join Status.
564 564  
565 -{{info}}
566 -**AT Command: AT+NJS**
567 -{{/info}}
568 568  
562 +(% style="color:blue" %)**AT Command: AT+NJS**
563 +
569 569  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
570 570  |=(% colspan="3" style="width: 495px;" %)AT+NJS
571 571  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -575,12 +575,12 @@
575 575  
576 576  == 6.6 Print Last Received Data in Raw Format ==
577 577  
573 +
578 578  Feature: Print Last Received Data in Raw Format<port:data>.
579 579  
580 -{{info}}
581 -**AT Command: AT+RECV**
582 -{{/info}}
583 583  
577 +(% style="color:blue" %)**AT Command: AT+RECV**
578 +
584 584  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
585 585  |=(% colspan="3" style="width: 584px;" %)AT+RECV
586 586  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -590,12 +590,12 @@
590 590  
591 591  == 6.7 Print Last Received Data in Binary Format ==
592 592  
588 +
593 593  Feature: Print Last Received Data in Binary Format<port:data>.
594 594  
595 -{{info}}
596 -**AT Command: AT+RECVB**
597 -{{/info}}
598 598  
592 +(% style="color:blue" %)**AT Command: AT+RECVB**
593 +
599 599  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
600 600  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
601 601  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -605,12 +605,12 @@
605 605  
606 606  == 6.8 Send Text Data ==
607 607  
603 +
608 608  Feature: Send Text Data<port:data>.
609 609  
610 -{{info}}
611 -**AT Command: AT+SEND**
612 -{{/info}}
613 613  
607 +(% style="color:blue" %)**AT Command: AT+SEND**
608 +
614 614  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
615 615  |=(% colspan="3" style="width: 988px;" %)AT+SEND
616 616  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -624,17 +624,17 @@
624 624  
625 625  == 6.9 Send Hexadecimal Data ==
626 626  
622 +
627 627  Feature: Send hexadecimal data along with the application port.
628 628  
629 -{{info}}
630 -**AT Command: AT+SENDB**
631 -{{/info}}
632 632  
633 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
634 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
635 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
636 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
637 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
626 +(% style="color:blue" %)**AT Command: AT+SENDB**
627 +
628 +(% border="1" style="background-color:#ffffcc; color:green; width:1101px" %)
629 +|=(% colspan="3" style="width: 1098px;" %)AT+SENDB
630 +|(% style="width:257px" %)**Command Example**|(% style="width:394px" %)**Function**|(% style="width:446px" %)**Response**
631 +|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)OK
632 +|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:446px" %)While Error in format, return(((
638 638  AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
639 639  
640 640  
... ... @@ -644,12 +644,12 @@
644 644  
645 645  == 7.1 Adaptive Data Rate ==
646 646  
642 +
647 647  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
648 648  
649 -{{info}}
650 -**AT Command: AT+ADR**
651 -{{/info}}
652 652  
646 +(% style="color:blue" %)**AT Command: AT+ADR**
647 +
653 653  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
654 654  |=(% colspan="3" style="width: 680px;" %)AT+ADR
655 655  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -661,24 +661,21 @@
661 661  AT_PARAM_ERROR
662 662  )))
663 663  
664 -{{info}}
665 -**Downlink Command: 0x22**
666 -{{/info}}
659 +(% style="color:blue" %)**Downlink Command: 0x22**
667 667  
668 -
669 669  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
670 670  
671 -* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
672 -* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
663 +* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
664 +* **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
673 673  
674 674  == 7.2 LoRa® Class ==
675 675  
668 +
676 676  Feature: Get or Set the Device Class(Currently only support class A, class C).
677 677  
678 -{{info}}
679 -**AT Command:AT+CLASS**
680 -{{/info}}
681 681  
672 +(% style="color:blue" %)**AT Command:  AT+CLASS**
673 +
682 682  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
683 683  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
684 684  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -691,12 +691,12 @@
691 691  
692 692  == 7.3 Duty Cycle Setting ==
693 693  
694 -Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
695 695  
696 -{{info}}
697 -**AT Command:AT+DCS**
698 -{{/info}}
687 +Feature: Get or Set the ETSI Duty Cycle setting** - 0**=disable, **1**=enable - Only for testing.
699 699  
689 +
690 +(% style="color:blue" %)**AT Command:  AT+DCS**
691 +
700 700  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
701 701  |=(% colspan="3" style="width: 512px;" %)AT+DCS
702 702  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -709,12 +709,17 @@
709 709  
710 710  == 7.4 Data Rate ==
711 711  
712 -Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
713 713  
714 -{{info}}
715 -**AT Command: AT+DR**
716 -{{/info}}
705 +Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
717 717  
707 +(% style="color:red" %)
708 +**Notice:**
709 +
710 +* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
711 +* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
712 +
713 +(% style="color:blue" %)**AT Command: AT+DR**
714 +
718 718  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
719 719  |=(% colspan="3" style="width: 463px;" %)AT+DR
720 720  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -725,24 +725,21 @@
725 725  
726 726  )))
727 727  
728 -{{info}}
729 -**Downlink Command: 0x2200aaFF**
730 -{{/info}}
725 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
731 731  
732 -
733 733  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
734 734  
735 -* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
736 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
729 +* **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
730 +* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
737 737  
738 738  == 7.5 Frame Counter Downlink ==
739 739  
734 +
740 740  Feature: Get or Set the Frame Counter Downlink.
741 741  
742 -{{info}}
743 -**AT Command:AT+FCD**
744 -{{/info}}
745 745  
738 +(% style="color:blue" %)**AT Command:  AT+FCD**
739 +
746 746  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
747 747  |=(% colspan="3" style="width: 690px;" %)AT+FCD
748 748  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -751,8 +751,6 @@
751 751  )))
752 752  |(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
753 753  OK
754 -
755 -
756 756  )))
757 757  
758 758  == 7.6 Frame Counter Uplink ==
... ... @@ -759,10 +759,9 @@
759 759  
760 760  Feature: Get or Set the Frame Counter Uplink.
761 761  
762 -{{info}}
763 -**AT Command:AT+FCU**
764 -{{/info}}
765 765  
755 +(% style="color:blue" %)**AT Command:  AT+FCU**
756 +
766 766  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
767 767  |=(% colspan="3" style="width: 531px;" %)AT+FCU
768 768  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -775,12 +775,12 @@
775 775  
776 776  == 7.7 Join Accept Delay1 ==
777 777  
769 +
778 778  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
779 779  
780 -{{info}}
781 -**AT Command:AT+JN1DL**
782 -{{/info}}
783 783  
773 +(% style="color:blue" %)**AT Command:  AT+JN1DL**
774 +
784 784  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
785 785  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
786 786  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -793,12 +793,12 @@
793 793  
794 794  == 7.8 Join Accept Delay2 ==
795 795  
787 +
796 796  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
797 797  
798 -{{info}}
799 -**AT Command:AT+JN2DL**
800 -{{/info}}
801 801  
791 +(% style="color:blue" %)**AT Command:  AT+JN2DL**
792 +
802 802  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
803 803  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
804 804  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -811,14 +811,14 @@
811 811  
812 812  == 7.9 Public Network Mode ==
813 813  
805 +
814 814  Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
815 815  
816 -Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
808 +(% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
817 817  
818 -{{info}}
819 -**AT Command:AT+PNM**
820 -{{/info}}
821 821  
811 +(% style="color:blue" %)**AT Command:  AT+PNM**
812 +
822 822  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
823 823  |=(% colspan="3" style="width: 664px;" %)AT+PNM
824 824  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -838,12 +838,12 @@
838 838  
839 839  == 7.10 Receive Delay1 ==
840 840  
832 +
841 841  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
842 842  
843 -{{info}}
844 -**AT Command:AT+RX1DL**
845 -{{/info}}
846 846  
836 +(% style="color:blue" %)**AT Command: AT+RX1DL**
837 +
847 847  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
848 848  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
849 849  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -856,12 +856,12 @@
856 856  
857 857  == 7.11 Receive Delay2 ==
858 858  
850 +
859 859  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
860 860  
861 -{{info}}
862 -**AT Command:AT+RX2DL**
863 -{{/info}}
864 864  
854 +(% style="color:blue" %)**AT Command: AT+RX2DL**
855 +
865 865  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
866 866  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
867 867  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -874,12 +874,12 @@
874 874  
875 875  == 7.12 Rx2 Window Data Rate ==
876 876  
868 +
877 877  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
878 878  
879 -{{info}}
880 -**AT Command:AT+RX2DR**
881 -{{/info}}
882 882  
872 +(% style="color:blue" %)**AT Command:  AT+RX2DR**
873 +
883 883  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
884 884  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
885 885  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -892,12 +892,12 @@
892 892  
893 893  == 7.13 Rx2 Window Frequency ==
894 894  
886 +
895 895  Feature: Get or Set the Rx2 window frequency
896 896  
897 -{{info}}
898 -**AT Command:AT+RX2FQ**
899 -{{/info}}
900 900  
890 +(% style="color:blue" %)**AT Command:  AT+RX2FQ**
891 +
901 901  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
902 902  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
903 903  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -910,12 +910,14 @@
910 910  
911 911  == 7.14 Transmit Power ==
912 912  
904 +
913 913  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
914 914  
915 -{{info}}
916 -**AT Command:AT+TXP**
917 -{{/info}}
907 +(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
918 918  
909 +
910 +(% style="color:blue" %)**AT Command:  AT+TXP**
911 +
919 919  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
920 920  |=(% colspan="3" style="width: 462px;" %)AT+TXP
921 921  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -930,17 +930,17 @@
930 930  
931 931  If the downlink payload=22000100, it means setting the TXP to 0.
932 932  
933 -* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
934 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
926 +* **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
927 +* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+TXP=0.
935 935  
936 936  == 7.15 RSSI of the Last Received Packet ==
937 937  
931 +
938 938  Feature: Get or Set the Rx2 window frequency
939 939  
940 -{{info}}
941 -**AT Command:AT+RSSI**
942 -{{/info}}
943 943  
935 +(% style="color:blue" %)**AT Command:AT+RSSI**
936 +
944 944  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
945 945  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
946 946  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -950,12 +950,12 @@
950 950  
951 951  == 7.16 SNR of the Last Received Packet ==
952 952  
946 +
953 953  Feature: Get the SNR of the last received packet
954 954  
955 -{{info}}
956 -**AT Command:AT+SNR**
957 -{{/info}}
958 958  
950 +(% style="color:blue" %)**AT Command:  AT+SNR**
951 +
959 959  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
960 960  |=(% colspan="3" style="width: 568px;" %)AT+SNR
961 961  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -965,12 +965,12 @@
965 965  
966 966  == 7.17 Application Port ==
967 967  
961 +
968 968  Feature: Get or set the application port.
969 969  
970 -{{info}}
971 -**AT Command: AT+PORT**
972 -{{/info}}
973 973  
965 +(% style="color:blue" %)**AT Command: AT+PORT**
966 +
974 974  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
975 975  |=(% colspan="3" style="width: 497px;" %)AT+PORT
976 976  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
... ... @@ -979,25 +979,23 @@
979 979  )))
980 980  |(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
981 981  
982 -{{info}}
983 -**Downlink Command: 0x23**
984 -{{/info}}
975 +(% style="color:blue" %)**Downlink Command: 0x23**
985 985  
986 986  Format: Command Code (0x23) followed by 1 bytes port value.
987 987  
988 988  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
989 989  
990 -* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
991 -* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
981 +* **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
982 +* **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
992 992  
993 993  == 7.18 Single Channel Mode ==
994 994  
986 +
995 995  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
996 996  
997 -{{info}}
998 -**AT Command: AT+CHS**
999 -{{/info}}
1000 1000  
990 +(% style="color:blue" %)**AT Command: AT+CHS**
991 +
1001 1001  (% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
1002 1002  |=(% colspan="3" style="width: 600px;" %)AT+CHS
1003 1003  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -1008,12 +1008,12 @@
1008 1008  
1009 1009  == 7.19 Eight Channel Mode ==
1010 1010  
1002 +
1011 1011  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1012 1012  
1013 -{{info}}
1014 -**AT Command: AT+CHE**
1015 -{{/info}}
1016 1016  
1006 +(% style="color:blue" %)**AT Command: AT+CHE**
1007 +
1017 1017  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1018 1018  |=(% colspan="3" style="width: 707px;" %)AT+CHE
1019 1019  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -1024,25 +1024,23 @@
1024 1024  )))
1025 1025  |(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1026 1026  
1027 -{{info}}
1028 -**Downlink Command: 0x24**
1029 -{{/info}}
1018 +(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
1030 1030  
1031 1031  Format: Command Code (0x24) followed by 1 bytes channel value.
1032 1032  
1033 1033  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1034 1034  
1035 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1036 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
1024 +* **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1025 +* **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1037 1037  
1038 1038  == 7.20 Get or Set RXwindows1 timeout ==
1039 1039  
1040 -Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1041 1041  
1042 -{{info}}
1043 -**AT Command: AT+RX1WTO**
1044 -{{/info}}
1030 +Feature: Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1045 1045  
1032 +
1033 +(% style="color:blue" %)**AT Command: AT+RX1WTO**
1034 +
1046 1046  (% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1047 1047  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1048 1048  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
... ... @@ -1052,11 +1052,17 @@
1052 1052  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1053 1053  
1054 1054  (((
1055 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1044 +
1045 +
1046 +
1047 +(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1048 +
1049 +
1056 1056  )))
1057 1057  
1058 1058  [[image:image-20220526162535-1.png]]
1059 1059  
1054 +
1060 1060  (((
1061 1061  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1062 1062  
... ... @@ -1065,12 +1065,12 @@
1065 1065  
1066 1066  == 7.21 Get or Set RXwindows2 timeout ==
1067 1067  
1068 -Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1069 1069  
1070 -{{info}}
1071 -**AT Command: AT+RX2WTO**
1072 -{{/info}}
1064 +Feature: Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1073 1073  
1066 +
1067 +(% style="color:blue" %)**AT Command: AT+RX2WTO**
1068 +
1074 1074  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1075 1075  |=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1076 1076  |(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
... ... @@ -1081,12 +1081,12 @@
1081 1081  
1082 1082  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1083 1083  
1079 +
1084 1084  Feature: Get or Set uplinkdwelltime
1085 1085  
1086 -{{info}}
1087 -**AT Command: AT+DWELLT**
1088 -{{/info}}
1089 1089  
1083 +(% style="color:blue" %)**AT Command: AT+DWELLT**
1084 +
1090 1090  (% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1091 1091  |=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1092 1092  |(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
... ... @@ -1095,23 +1095,23 @@
1095 1095  )))
1096 1096  |(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
1097 1097  
1098 -{{info}}
1099 -**Downlink Command: 0x25**
1100 -{{/info}}
1093 +(% style="color:blue" %)**Downlink Command: 0x25**
1101 1101  
1102 1102  Format: Command Code (0x25) followed by 1 bytes state value.
1103 1103  
1104 1104  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1105 1105  
1106 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1107 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1099 +* **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1100 +* **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1108 1108  
1109 1109  == 7.23 Set Packet Receiving Response Level ==
1110 1110  
1104 +
1111 1111  Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1112 1112  
1113 -RPL value:
1114 1114  
1108 +**RPL value:**
1109 +
1115 1115  * **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1116 1116  * **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1117 1117  * **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
... ... @@ -1118,15 +1118,13 @@
1118 1118  * **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1119 1119  * **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1120 1120  
1121 -Case Analyes:
1116 +**Case Analyes:**
1122 1122  
1123 1123  * For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
1124 1124  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1125 1125  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1126 1126  
1127 -{{info}}
1128 -**AT Command: AT+RPL**
1129 -{{/info}}
1122 +(% style="color:blue" %)**AT Command: AT+RPL**
1130 1130  
1131 1131  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1132 1132  |=(% colspan="3" style="width: 533px;" %)AT+RPL
... ... @@ -1136,52 +1136,55 @@
1136 1136  )))
1137 1137  |(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
1138 1138  
1139 -{{info}}
1140 -**Downlink Command: 0x21**
1141 -{{/info}}
1132 +(% style="color:blue" %)**Downlink Command: 0x21**
1142 1142  
1143 1143  Format: Command Code (0x21) followed by 1 bytes level value.
1144 1144  
1145 1145  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1146 1146  
1147 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1148 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1138 +* **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1139 +* **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1149 1149  
1150 1150  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1151 1151  
1152 -{{info}}
1153 -**AT Command: AT+SETMAXNBTRANS **
1154 -{{/info}}
1155 1155  
1156 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1157 -|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1158 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1159 -|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1144 +(% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1145 +
1146 +(% border="1" style="background-color:#ffffcc; color:green; width:589px" %)
1147 +|=(% colspan="3" style="width: 586px;" %)AT+**SETMAXNBTRANS**
1148 +|(% style="width:227px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:87px" %)**Response**
1149 +|(% style="width:227px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1160 1160  OK
1161 1161  )))
1162 -|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1152 +|(% style="width:227px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:300px" %)(((
1153 +value2: 0: uplink fcnt doesn't change for each NBTrans;
1154 +
1155 +1: uplink fcnt increase by 1 for each NBTrans.
1156 +)))|(% style="width:87px" %)(((
1163 1163  1
1164 1164  
1165 1165  OK
1166 1166  )))
1167 1167  
1168 -{{info}}
1169 -**Downlink Command: 0x33**
1170 -{{/info}}
1162 +(% style="color:blue" %)**Downlink Command: 0x33**
1171 1171  
1172 1172  Format: Command Code (0x33) followed by 2 bytes mode value.
1173 1173  
1174 1174  If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1175 1175  
1176 -* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1177 -* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1168 +* Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1169 +* Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1178 1178  
1179 1179  == 7.25 Device offline rejoining （LWS007) ==
1180 1180  
1181 -{{info}}
1182 -**AT Command: AT+DDETECT**
1183 -{{/info}}
1184 1184  
1174 +(% style="color:blue" %)**AT Command: AT+DDETECT**
1175 +
1176 +AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
1177 +
1178 +* ACK_Timout_1: Unit: min
1179 +* ACK_Timout_2: Unit: min
1180 +
1185 1185  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1186 1186  |=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1187 1187  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -1213,22 +1213,23 @@
1213 1213  OK
1214 1214  )))
1215 1215  
1216 -{{info}}
1217 -**Downlink Command: 0x33**
1218 -{{/info}}
1212 +(% style="color:blue" %)**Downlink Command: 0x32**
1219 1219  
1220 1220  Format: Command Code (0x32) followed by 2 bytes mode value.
1221 1221  
1222 -If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1216 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1223 1223  
1224 -* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1218 +* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1219 +** 0x01 : Flag
1220 +** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
1221 +** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
1222 +** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1225 1225  
1226 1226  == 7.26 Request the server to send an ACK ==
1227 1227  
1228 -{{info}}
1229 -**AT Command: AT+PNACKMD**
1230 -{{/info}}
1231 1231  
1227 +(% style="color:blue" %)**AT Command: AT+PNACKMD**
1228 +
1232 1232  (% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1233 1233  |=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1234 1234  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
... ... @@ -1243,49 +1243,47 @@
1243 1243  
1244 1244  == 7.27 Adjust network rejoining interval ==
1245 1245  
1246 -{{info}}
1247 -**AT Command: AT+RJTDC**
1248 -{{/info}}
1249 1249  
1244 +(% style="color:blue" %)**AT Command: AT+RJTDC**
1245 +
1250 1250  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1251 1251  |=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1252 1252  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1253 -|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1249 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30(((
1254 1254  OK
1255 1255  
1256 -the interval is 30000ms = 30s
1252 +the interval is 30 min
1257 1257  )))
1258 -|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1259 -Set the ReJoin data transmission interval to 60000ms = 60 seconds
1254 +|(% style="width:165px" %)AT+RJTDC=60|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1255 +Set the ReJoin data transmission interval to 60 min
1260 1260  )))
1261 1261  
1262 -{{info}}
1263 -**Downlink Command: 0x26**
1264 -{{/info}}
1258 +(% style="color:blue" %)**Downlink Command: 0x26**
1265 1265  
1266 1266  Format: Command Code (0x26) followed by 2 bytes mode value.
1267 1267  
1268 1268  If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1269 1269  
1270 -* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1271 -* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1264 +* **Example 1:** Downlink Payload: 26000A  ~/~/ Set AT+RJTDC=10
1265 +* **Example 2: **Downlink Payload: 260002  ~/~/ Set AT+RJTDC=2
1272 1272  
1273 1273  = 8. AT Commands Combination =
1274 1274  
1275 1275  == 8.1 Set a fix RX2DR for downlink window ==
1276 1276  
1277 -* **AT+ADR=0 **~-~-> Disable ADR first
1278 -* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
1279 1279  
1272 +* (% style="color:blue" %)**AT+ADR=0             **(%%) **~-~->**  Disable ADR first
1273 +* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~-~->**  Set xxxx to your wanted DataRate
1274 +
1280 1280  == 8.2 Use Downlink Command to set a fix uplink DR ==
1281 1281  
1282 -{{info}}
1283 -**Downlink Command: 0x22000500**
1284 -{{/info}}
1285 1285  
1286 -Same as:
1278 +(% style="color:blue" %)**Downlink Command: 0x22000500**
1287 1287  
1288 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1289 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1290 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1291 -~)~)~)
1280 +**Same as:**
1281 +
1282 +* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1283 +* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1284 +* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1285 +
1286 +

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0