Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -9,39 +9,35 @@
9	9
10	10	Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
11	11
12		-* **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
13		-* **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
	12	+* (% style="color:blue" %)**Common Commands:** (%%) They should be available for each sensor, such as: change uplink interval, reset device.
14	14
	14	+* (% style="color:blue" %)**Sensor Related Commands:** (%%) Only for special sensor, such as control relay, poll RS485 device.
	15	+
15	15	(((
16	16	**This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
17		-
18	18	)))
19	19
	20	+
20	20	= 2. How to use AT Commands or Downlink command =
21	21
22	22
23		-* For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
24		-* For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
	24	+* **AT Command** : See Devices User Manual for how to connect to device via USB TTL adapter and use. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
	25	+
	26	+* **LoRaWAN Downlink Command**: The gateway transfer downlink command in HEX format. This page shows the Downlink Command In HEX format. Please note some LoRaWAN servers use base64 as downlink code so user need to convert HEX to Base64 and use. Below are references for how to use downlink command:
25	25	** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
26		-** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
	28	+** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]], [[How to Convert>>http://wiki.dragino.com/xwiki/bin/view/Main/Notes%20for%20ChirpStack/#H4.1ConvertHEXtoBase64]]?
27	27	** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
28	28
	31	+(% style="display:none" %) (%%)
29	29
30	30	= 3. Support End Node and firmware version =
31	31
32	32
33		-(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
34		-|=(% colspan="3" style="width: 963px;" %)(((
35	35	Dragino STM32 base hardware Firmware / LoRaWAN stack list
36		-)))
	37	+
	38	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:966px" %)
	39	+|(% style="background-color:#4f81bd; color:white; width:187px" %)**Model**|(% style="background-color:#4f81bd; color:white; width:330px" %)**Description**|(% style="background-color:#4f81bd; color:white; width:445px" %)**Firmware Version <~-~-> Stack Version**
37	37	|(% style="width:187px" %)(((
38		-**Model**
39		-)))|(% style="width:330px" %)(((
40		-**Description**
41		-)))|(% style="width:445px" %)(((
42		-**Firmware Version <~-~-> Stack Version**
43		-)))
44		-|(% style="width:187px" %)(((
45	45	[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
46	46	)))|(% style="width:330px" %)(((
47	47	Open Source Generic LoRaWAN Sensor Node
...	...	@@ -101,9 +101,10 @@
101	101	)))
102	102	)))
103	103
	100	+(% style="display:none" %) (%%)
	101	+
104	104	= 4. System Management Commands =
105	105
106		-
107	107	== 4.1 Change Uplink Interval ==
108	108
109	109
...	...	@@ -112,9 +112,8 @@
112	112
113	113	(% style="color:blue" %)**AT Command: AT+TDC**
114	114
115		-(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
116		-|=(% colspan="3" style="width: 724px;" %)AT+TDC
117		-|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
	112	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:727.222px" %)
	113	+|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:329px" %)**Response**
118	118	|(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
119	119	OK
120	120
...	...	@@ -125,8 +125,6 @@
125	125	)))
126	126
127	127	(((
128		-
129		-
130	130	(% style="color:blue" %)**Downlink Command: 0x01**
131	131
132	132	Format: Command Code (0x01) followed by 3 bytes time value.
...	...	@@ -133,13 +133,15 @@
133	133	)))
134	134
135	135	(((
136		-If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
	130	+If the downlink payload=0100003C, it means set the END Node's Transmit Interval to 0x00003C=60(S), while type code is 01.
137	137	)))
138	138
139		-* **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
140		-* **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
	133	+* **Example 1**: Downlink Payload:** 0100001E**  ~/~/ Set Transmit Interval (TDC) = 30 seconds
141	141
	135	+* **Example 2**: Downlink Payload:** 0100003C**  ~/~/ Set Transmit Interval (TDC) = 60 seconds
142	142
	137	+(% style="display:none" %) (%%)
	138	+
143	143	== 4.2 Reboot End Node ==
144	144
145	145
...	...	@@ -146,12 +146,11 @@
146	146	Feature: Reboot End Node to perform a new OTAA or ABP Join.
147	147
148	148
149		-(% style="color:blue" %)**AT Command: ATZ**
	145	+(% style="color:blue" %)**AT Command: ATZ  ~/~/ **(%%)Trig a reset of the MCU
150	150
151		-(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
152		-|=(% colspan="3" %)ATZ: Trig a reset of the MCU
153		-|**Command Example**|**Function**|**Response**
154		-|ATZ|Reset MCU|(((
	147	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:546px" %)
	148	+|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:92px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:294px" %)**Response**
	149	+|(% style="width:157px" %)ATZ|(% style="width:92px" %)Reset MCU|(% style="width:294px" %)(((
155	155	Device reset and show booting info
156	156
157	157	LSN50 Device/LoRa ST Module
...	...	@@ -172,11 +172,10 @@
172	172	)))
173	173
174	174	(((
175		-If the downlink payload=**04FF**, the end node will reboot.
176		-
177		-
	170	+If the downlink payload=**04FF**, the end node will reboot.
178	178	)))
179	179
	173	+
180	180	== 4.3 Reset to factory Default ==
181	181
182	182
...	...	@@ -183,12 +183,11 @@
183	183	Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
184	184
185	185
186		-(% style="color:blue" %)**AT Command: AT+FDR**
	180	+(% style="color:blue" %)**AT Command: AT+FDR  ~/~/  **(%%)Reset to factory default
187	187
188		-(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
189		-|=(% colspan="3" style="width: 828px;" %)Reset to factory default
190		-|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
191		-|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
	182	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:789px" %)
	183	+|(% style="background-color:#4f81bd; color:white; width:154px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:175px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:456px" %)**Response**
	184	+|(% style="width:154px" %)AT+FDR|(% style="width:175px" %)Reset to factory default|(% style="width:456px" %)(((
192	192	Device reset to factory default parameters and show booting info
193	193
194	194	LSN50 Device/LoRa ST Module
...	...	@@ -219,12 +219,11 @@
219	219	Feature: Show firmware version. No downlink command yet.
220	220
221	221
222		-(% style="color:blue" %)**AT Command: AT+VER**
	215	+(% style="color:blue" %)**AT Command: AT+VER  ~/~/   **(%%)Image Version and Frequency Band
223	223
224		-(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
225		-|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
226		-|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
227		-|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
	217	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:542px" %)
	218	+|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:86px" %)**Response**
	219	+|(% style="width:157px" %)AT+VER=?|(% style="width:295px" %)Show Image version and Frequency Band|(% style="width:86px" %)(((
228	228	1.3 EU868
229	229
230	230	OK
...	...	@@ -243,8 +243,7 @@
243	243	(((
244	244
245	245
246		-
247		-**xx: Software Type:**
	238	+(% style="color:#037691" %)**xx: Software Type:**
248	248	)))
249	249
250	250	* 0x00 01: LGT92 Version
...	...	@@ -254,8 +254,7 @@
254	254	(((
255	255
256	256
257		-
258		-**yy: Frequency Band:**
	248	+(% style="color:#037691" %)**yy: Frequency Band:**
259	259	)))
260	260
261	261	* 0x01: EU868
...	...	@@ -272,8 +272,7 @@
272	272	(((
273	273
274	274
275		-
276		-**zz: Subband**
	265	+(% style="color:#037691" %)**zz: Subband**
277	277	)))
278	278
279	279	firmware version: v1.1.0 ~-~-> 110
...	...	@@ -285,29 +285,23 @@
285	285	Feature: Show All configure. No downlink command yet.
286	286
287	287
288		-(% style="color:blue" %)**AT Command: AT+CFG**
	277	+(% style="color:blue" %)**AT Command: AT+CFG  ~/~/ **(%%)Print all configurations
289	289
290		-(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
291		-|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
292		-|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
	279	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:599.222px" %)
	280	+|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:154px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:280px" %)**Response**
293	293	|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
294	294	AT+DEUI = XX XX XX XX XX XX XX XX
295		-
296	296	AT+DADDR=XXXXXXXX
297		-
298	298	……….
299		-
300	300	AT+RX2WTO=X
301		-
302	302	AT+CHS=868100000
303		-
304	304	OK
305	305	)))
306	306
	290	+(% style="display:none" %) (%%)
307	307
308	308	= 5. Keys, IDs and EUIs management =
309	309
310		-
311	311	== 5.1 Application EUI ==
312	312
313	313
...	...	@@ -316,14 +316,14 @@
316	316
317	317	(% style="color:blue" %)**AT Command: AT+APPEUI**
318	318
319		-(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
320		-|=(% colspan="3" style="width: 683px;" %)AT+APPEUI
321		-|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
322		-|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
	302	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:643px" %)
	303	+|(% style="background-color:#4f81bd; color:white; width:272px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:182px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:184px" %)**Response**
	304	+|(% style="width:272px" %)AT+APPEUI=?|(% style="width:182px" %)Get the Application EUI|(% style="width:184px" %)00 b3 d5 00 00 00 00 00(((
323	323	OK
324	324	)))
325		-|(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
	307	+|(% style="width:272px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:182px" %)Set the Application EUI|(% style="width:184px" %)OK
326	326
	309	+(% style="display:none" %) (%%)
327	327
328	328	== 5.2 Application Key ==
329	329
...	...	@@ -333,14 +333,14 @@
333	333
334	334	(% style="color:blue" %)**AT Command: AT+APPKEY**
335	335
336		-(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
337		-|=(% colspan="3" style="width: 973px;" %)AT+APPKEY
338		-|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
	319	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:976.222px" %)
	320	+|(% style="background-color:#4f81bd; color:white; width:441px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:180px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:350px" %)**Response**
339	339	|(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
340	340	OK
341	341	)))
342	342	|(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
343	343
	326	+(% style="display:none" %) (%%)
344	344
345	345	== 5.3 Application Session Key ==
346	346
...	...	@@ -350,9 +350,8 @@
350	350
351	351	(% style="color:blue" %)**AT Command: AT+APPSKEY**
352	352
353		-(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
354		-|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
355		-|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
	336	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1040.22px" %)
	337	+|(% style="background-color:#4f81bd; color:white; width:451px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:231px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:354px" %)**Response**
356	356	|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
357	357	OK
358	358	)))
...	...	@@ -360,6 +360,7 @@
360	360	OK
361	361	)))
362	362
	345	+(% style="display:none" %) (%%)
363	363
364	364	== 5.4 Device Address ==
365	365
...	...	@@ -369,9 +369,8 @@
369	369
370	370	(% style="color:blue" %)**AT Command: AT+DADDR**
371	371
372		-(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
373		-|=(% colspan="3" style="width: 792px;" %)AT+DADDR
374		-|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
	355	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:795.222px" %)
	356	+|(% style="background-color:#4f81bd; color:white; width:192px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:241px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:359px" %)**Response**
375	375	|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
376	376	A8 40 41 FF
377	377
...	...	@@ -379,6 +379,7 @@
379	379	)))
380	380	|(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
381	381
	364	+(% style="display:none" %) (%%)
382	382
383	383	== 5.5 Device EUI ==
384	384
...	...	@@ -388,9 +388,8 @@
388	388
389	389	(% style="color:blue" %)**AT Command: AT+DEUI**
390	390
391		-(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
392		-|=(% colspan="3" style="width: 1032px;" %)AT+DEUI
393		-|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
	374	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1035.22px" %)
	375	+|(% style="background-color:#4f81bd; color:white; width:250px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:634px" %)**Response**
394	394	|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
395	395	OK
396	396	)))
...	...	@@ -398,6 +398,7 @@
398	398	OK
399	399	)))
400	400
	383	+(% style="display:none" %) (%%)
401	401
402	402	== 5.6 Network ID ==
403	403
...	...	@@ -407,14 +407,14 @@
407	407
408	408	(% style="color:blue" %)**AT Command: AT+NWKID**
409	409
410		-(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
411		-|=(% colspan="3" style="width: 445px;" %)AT+NWKID
412		-|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
	393	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:448.222px" %)
	394	+|(% style="background-color:#4f81bd; color:white; width:191px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:153px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
413	413	|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
414	414	OK
415	415	)))
416	416	|(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
417	417
	400	+(% style="display:none" %) (%%)
418	418
419	419	== 5.7 Network Session Key ==
420	420
...	...	@@ -424,21 +424,19 @@
424	424
425	425	(% style="color:blue" %)**AT Command: AT+NWKSKEY**
426	426
427		-(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
428		-|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
429		-|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
	410	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:1017.22px" %)
	411	+|(% style="background-color:#4f81bd; color:white; width:455px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:215px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:343px" %)**Response**
430	430	|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
431	431	OK
432	432	)))
433	433	|(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
434	434
	417	+(% style="display:none" %) (%%)
435	435
436	436	= 6. Joining and sending date on LoRaWAN network =
437	437
438		-
439	439	== 6.1 Confirm Mode ==
440	440
441		-
442	442	=== 6.1.1  AT+CFM command before DR-LWS007 software stack ===
443	443
444	444
...	...	@@ -447,9 +447,8 @@
447	447
448	448	(% style="color:blue" %)**AT Command: AT+CFM**
449	449
450		-(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
451		-|=(% colspan="3" style="width: 707px;" %)AT+CFM
452		-|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
	431	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:710.222px" %)
	432	+|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:205px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:346px" %)**Response**
453	453	|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
454	454	OK
455	455	)))
...	...	@@ -462,10 +462,11 @@
462	462
463	463	If the downlink payload=0501, it means set end node to use confirm mode, while type code is 05.
464	464
465		-* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
466		-* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
	445	+* **Example 1:** Downlink Payload: 0501  ~/~/ Set AT+CFM=1
467	467
	447	+* **Example 2:** Downlink Payload: 0500  ~/~/ Set AT+CFM=0
468	468
	449	+(% style="display:none" %) (%%)
469	469
470	470	=== 6.1.2  AT+CFM command since DR-LWS007 software stack ===
471	471
...	...	@@ -472,14 +472,13 @@
472	472
473	473	(% style="color:blue" %)**AT Command: AT+CFM**
474	474
475		-(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
476		-|=(% colspan="3" style="width: 707px;" %)AT+CFM
477		-|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
	456	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:462px" %)
	457	+|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
478	478	|(% style="width:160px" %)(((
479	479	AT+CFM=1,0,0
480	480
481	481	value1
482		-)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
	462	+)))|(% style="width:198px" %)confirmed uplink|(% style="width:100px" %)(((
483	483	1
484	484
485	485	OK
...	...	@@ -488,7 +488,7 @@
488	488	AT+CFM=0,?,0
489	489
490	490	value2
491		-)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
	471	+)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:100px" %)(((
492	492	0~~7
493	493
494	494	OK
...	...	@@ -497,7 +497,7 @@
497	497	AT+CFM=0,0,1
498	498
499	499	value3
500		-)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
	480	+)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:100px" %)(((
501	501	1
502	502
503	503	OK
...	...	@@ -509,10 +509,11 @@
509	509
510	510	If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
511	511
512		-* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
513		-* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
	492	+* **Example 1:** Downlink Payload: 05010101  ~/~/ Set AT+CFM=1,1,1
514	514
	494	+* **Example 2:** Downlink Payload: 05000700  ~/~/ Set AT+CFM=0,7,0
515	515
	496	+(% style="display:none" %) (%%)
516	516
517	517	== 6.2 Confirm Status ==
518	518
...	...	@@ -522,13 +522,13 @@
522	522
523	523	(% style="color:blue" %)**AT Command: AT+CFS**
524	524
525		-(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
526		-|=(% colspan="3" style="width: 531px;" %)AT+CFS
527		-|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
528		-|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
	506	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:463px" %)
	507	+|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
	508	+|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:107px" %)0(((
529	529	OK
530	530	)))
531	531
	512	+(% style="display:none" %) (%%)
532	532
533	533	== 6.3 Join LoRa® Network ==
534	534
...	...	@@ -538,15 +538,14 @@
538	538
539	539	(% style="color:blue" %)**AT Command: AT+JOIN**
540	540
541		-(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
542		-|=(% colspan="3" style="width: 644px;" %)AT+JOIN
543		-|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
	522	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:647.222px" %)
	523	+|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:334px" %)**Response**
544	544	|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
545	545	OK
546		-
547	547	While Error in format, return AT_BUSY_ERROR
548	548	)))
549	549
	529	+(% style="display:none" %) (%%)
550	550
551	551	== 6.4 LoRa® Network Join Mode ==
552	552
...	...	@@ -556,9 +556,8 @@
556	556
557	557	(% style="color:blue" %)**AT Command: AT+NJM**
558	558
559		-(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
560		-|=(% colspan="3" style="width: 750px;" %)AT+NJM
561		-|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
	539	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:753.222px" %)
	540	+|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:227px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
562	562	|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
563	563	OK
564	564	)))
...	...	@@ -571,10 +571,11 @@
571	571
572	572	If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
573	573
574		-* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
575		-* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
	553	+* **Example 1: **Downlink Payload: **2000                  ** ~/~/ Set AT+NJM=0
576	576
	555	+* **Example 2:** Downlink Payload: **2001**  ~/~/ Set AT+NJM=1
577	577
	557	+(% style="display:none" %) (%%)
578	578
579	579	== 6.5 LoRa® Network Join Status ==
580	580
...	...	@@ -584,13 +584,13 @@
584	584
585	585	(% style="color:blue" %)**AT Command: AT+NJS**
586	586
587		-(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
588		-|=(% colspan="3" style="width: 495px;" %)AT+NJS
589		-|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
590		-|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
	567	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:435px" %)
	568	+|(% style="background-color:#4f81bd; color:white; width:169px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:164px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:97px" %)**Response**
	569	+|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:97px" %)0(((
591	591	OK
592	592	)))
593	593
	573	+(% style="display:none" %) (%%)
594	594
595	595	== 6.6 Print Last Received Data in Raw Format ==
596	596
...	...	@@ -600,13 +600,13 @@
600	600
601	601	(% style="color:blue" %)**AT Command: AT+RECV**
602	602
603		-(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
604		-|=(% colspan="3" style="width: 584px;" %)AT+RECV
605		-|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
606		-|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
	583	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:543px" %)
	584	+|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
	585	+|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:104px" %)0:(((
607	607	OK
608	608	)))
609	609
	589	+(% style="display:none" %) (%%)
610	610
611	611	== 6.7 Print Last Received Data in Binary Format ==
612	612
...	...	@@ -616,13 +616,13 @@
616	616
617	617	(% style="color:blue" %)**AT Command: AT+RECVB**
618	618
619		-(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
620		-|=(% colspan="3" style="width: 790px;" %)AT+RECVB
621		-|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
	599	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:793.222px" %)
	600	+|(% style="background-color:#4f81bd; color:white; width:173px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:497px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:120px" %)**Response**
622	622	|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
623	623	OK
624	624	)))
625	625
	605	+(% style="display:none" %) (%%)
626	626
627	627	== 6.8 Send Text Data ==
628	628
...	...	@@ -632,17 +632,14 @@
632	632
633	633	(% style="color:blue" %)**AT Command: AT+SEND**
634	634
635		-(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
636		-|=(% colspan="3" style="width: 988px;" %)AT+SEND
637		-|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
	615	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:991.222px" %)
	616	+|(% style="background-color:#4f81bd; color:white; width:201px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:340px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:446px" %)**Response**
638	638	|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
639	639	While Error in format, return
640		-
641	641	AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
642		-
643		-
644	644	)))
645	645
	622	+(% style="display:none" %) (%%)
646	646
647	647	== 6.9 Send Hexadecimal Data ==
648	648
...	...	@@ -652,20 +652,17 @@
652	652
653	653	(% style="color:blue" %)**AT Command: AT+SENDB**
654	654
655		-(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
656		-|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
657		-|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
658		-|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
659		-|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return(((
660		-AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
661		-
662		-
	632	+(% border="1" cellspacing="4" style="width:974px" %)
	633	+|(% style="background-color:#4f81bd; color:white; width:257px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:394px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:318px" %)**Response**
	634	+|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)OK
	635	+|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:394px" %)Send hexadecimal data along with the application port.|(% style="width:318px" %)While Error in format, return(((
	636	+AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED
663	663	)))
664	664
	639	+(% style="display:none" %) (%%)
665	665
666	666	= 7. LoRaWAN network management =
667	667
668		-
669	669	== 7.1 Adaptive Data Rate ==
670	670
671	671
...	...	@@ -674,14 +674,13 @@
674	674
675	675	(% style="color:blue" %)**AT Command: AT+ADR**
676	676
677		-(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
678		-|=(% colspan="3" style="width: 680px;" %)AT+ADR
679		-|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
680		-|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
	651	+(% border="1" cellspacing="4" style="width:643px" %)
	652	+|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:266px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:209px" %)**Response**
	653	+|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:209px" %)1(((
681	681	OK
682	682	)))
683		-|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK
684		-|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((
	656	+|(% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)OK
	657	+|(% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:209px" %)While Error in format, return(((
685	685	AT_PARAM_ERROR
686	686	)))
687	687
...	...	@@ -689,10 +689,11 @@
689	689
690	690	If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
691	691
692		-* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
693		-* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
	665	+* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
694	694
	667	+* **Example 2**: Downlink Payload: **2200FFFF**  ~/~/ Set AT+ADR=0.
695	695
	669	+(% style="display:none" %) (%%)
696	696
697	697	== 7.2 LoRa® Class ==
698	698
...	...	@@ -700,30 +700,34 @@
700	700	Feature: Get or Set the Device Class(Currently only support class A, class C).
701	701
702	702
703		-(% style="color:blue" %)**AT Command:AT+CLASS**
	677	+(% style="color:blue" %)**AT Command:  AT+CLASS**
704	704
705		-(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
706		-|=(% colspan="3" style="width: 504px;" %)AT+CLASS
707		-|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
708		-|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
	679	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:428px" %)
	680	+|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:166px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:94px" %)**Response**
	681	+|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:94px" %)A(((
709	709	OK
710	710	)))
711		-|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((
	684	+|(% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:94px" %)OK(((
712	712
713	713	)))
714	714
	688	+(% style="display:none" %)
715	715
	690	+(% style="color:red" %)**Notice:**
	691	+
	692	+* Run AT+FDR before running AT+CLASS=C
	693	+* After change to Class=C, Before OTAA Join Successfule, the end node will still shows to use CLASS=A for OTAA Joined. It will use CLASS=C after OTAA Join Succeccful.
	694	+
716	716	== 7.3 Duty Cycle Setting ==
717	717
718	718
719		-Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
	698	+Feature: Get or Set the ETSI Duty Cycle setting** : 0**=disable, **1**=enable - Only for testing.
720	720
721	721
722		-(% style="color:blue" %)**AT Command:AT+DCS**
	701	+(% style="color:blue" %)**AT Command:  AT+DCS**
723	723
724		-(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
725		-|=(% colspan="3" style="width: 512px;" %)AT+DCS
726		-|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
	703	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:515.222px" %)
	704	+|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:107px" %)**Response**
727	727	|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
728	728	OK
729	729	)))
...	...	@@ -731,22 +731,28 @@
731	731
732	732	)))
733	733
	712	+(% style="display:none" %) (%%)
734	734
735	735	== 7.4 Data Rate ==
736	736
737	737
738		-Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
	717	+Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) .
739	739
	719	+(% style="color:red" %)
	720	+**Notice:**
740	740
	722	+* User need to set Adaptive Data Rate(ADR)=0 first. otherwise device will respond to server's ADR command and change the DR according to server auto-adjustment.
	723	+
	724	+* Data Rate specifies Spreading Factor. The mapping varies in different frequency bands. User can check this link for detail. [[rp2-1.0.3-lorawan-regional-parameters.pdf>>https://lora-alliance.org/resource_hub/rp2-1-0-3-lorawan-regional-parameters/]]
	725	+
741	741	(% style="color:blue" %)**AT Command: AT+DR**
742	742
743		-(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
744		-|=(% colspan="3" style="width: 463px;" %)AT+DR
745		-|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
746		-|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
	728	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:409px" %)
	729	+|(% style="background-color:#4f81bd; color:white; width:156px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:147px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
	730	+|(% style="width:156px" %)AT+DR=?|(% style="width:147px" %)Get the Data Rate.|(% style="width:100px" %)5(((
747	747	OK
748	748	)))
749		-|(% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((
	733	+|(% style="width:156px" %)AT+DR=2|(% style="width:147px" %)Set the Data Rate.|(% style="width:100px" %)OK(((
750	750
751	751	)))
752	752
...	...	@@ -754,10 +754,11 @@
754	754
755	755	If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
756	756
757		-* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
758		-* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
	741	+* **Example 1**: Downlink Payload: **220001FF**  ~/~/ Set AT+DR=1.
759	759
	743	+* **Example 2**: Downlink Payload: **220000FF**  ~/~/ Set AT+DR=0.
760	760
	745	+(% style="display:none" %) (%%)
761	761
762	762	== 7.5 Frame Counter Downlink ==
763	763
...	...	@@ -765,11 +765,10 @@
765	765	Feature: Get or Set the Frame Counter Downlink.
766	766
767	767
768		-(% style="color:blue" %)**AT Command:AT+FCD**
	753	+(% style="color:blue" %)**AT Command:  AT+FCD**
769	769
770		-(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
771		-|=(% colspan="3" style="width: 690px;" %)AT+FCD
772		-|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
	755	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:693.222px" %)
	756	+|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:258px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:269px" %)**Response**
773	773	|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
774	774	OK
775	775	)))
...	...	@@ -777,6 +777,7 @@
777	777	OK
778	778	)))
779	779
	764	+(% style="display:none" %) (%%)
780	780
781	781	== 7.6 Frame Counter Uplink ==
782	782
...	...	@@ -783,11 +783,10 @@
783	783	Feature: Get or Set the Frame Counter Uplink.
784	784
785	785
786		-(% style="color:blue" %)**AT Command:AT+FCU**
	771	+(% style="color:blue" %)**AT Command:  AT+FCU**
787	787
788		-(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
789		-|=(% colspan="3" style="width: 531px;" %)AT+FCU
790		-|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
	773	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:534.222px" %)
	774	+|(% style="background-color:#4f81bd; color:white; width:177px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:239px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
791	791	|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
792	792	OK
793	793	)))
...	...	@@ -795,6 +795,7 @@
795	795
796	796	)))
797	797
	782	+(% style="display:none" %) (%%)
798	798
799	799	== 7.7 Join Accept Delay1 ==
800	800
...	...	@@ -802,11 +802,10 @@
802	802	Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
803	803
804	804
805		-(% style="color:blue" %)**AT Command:AT+JN1DL**
	790	+(% style="color:blue" %)**AT Command:  AT+JN1DL**
806	806
807		-(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
808		-|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
809		-|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
	792	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:537.222px" %)
	793	+|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:229px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:140px" %)**Response**
810	810	|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
811	811	OK
812	812	)))
...	...	@@ -814,17 +814,18 @@
814	814
815	815	)))
816	816
	801	+(% style="display:none" %) (%%)
817	817
818	818	== 7.8 Join Accept Delay2 ==
819	819
	805	+
820	820	Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
821	821
822	822
823		-(% style="color:blue" %)**AT Command:AT+JN2DL**
	809	+(% style="color:blue" %)**AT Command:  AT+JN2DL**
824	824
825		-(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
826		-|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
827		-|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
	811	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:538.222px" %)
	812	+|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:228px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:146px" %)**Response**
828	828	|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
829	829	OK
830	830	)))
...	...	@@ -832,6 +832,7 @@
832	832
833	833	)))
834	834
	820	+(% style="display:none" %) (%%)
835	835
836	836	== 7.9 Public Network Mode ==
837	837
...	...	@@ -838,14 +838,13 @@
838	838
839	839	Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
840	840
841		-(% style="color:red" %)Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
	827	+(% style="color:red" %)**Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network.**
842	842
843	843
844		-(% style="color:blue" %)**AT Command:AT+PNM**
	830	+(% style="color:blue" %)**AT Command:  AT+PNM**
845	845
846		-(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
847		-|=(% colspan="3" style="width: 664px;" %)AT+PNM
848		-|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
	832	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:667.222px" %)
	833	+|(% style="background-color:#4f81bd; color:white; width:166px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:225px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Response**
849	849	|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
850	850	OK
851	851	)))
...	...	@@ -860,6 +860,7 @@
860	860	)))
861	861	|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
862	862
	848	+(% style="display:none" %) (%%)
863	863
864	864	== 7.10 Receive Delay1 ==
865	865
...	...	@@ -867,11 +867,10 @@
867	867	Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
868	868
869	869
870		-(% style="color:blue" %)**AT Command:AT+RX1DL**
	856	+(% style="color:blue" %)**AT Command: AT+RX1DL**
871	871
872		-(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
873		-|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
874		-|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
	858	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:408.222px" %)
	859	+|(% style="background-color:#4f81bd; color:white; width:155px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:128px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:122px" %)**Response**
875	875	|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
876	876	OK
877	877	)))
...	...	@@ -879,8 +879,8 @@
879	879
880	880	)))
881	881
	867	+(% style="display:none" %) (%%)
882	882
883		-
884	884	== 7.11 Receive Delay2 ==
885	885
886	886
...	...	@@ -887,11 +887,10 @@
887	887	Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
888	888
889	889
890		-(% style="color:blue" %)**AT Command:AT+RX2DL**
	875	+(% style="color:blue" %)**AT Command: AT+RX2DL**
891	891
892		-(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
893		-|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
894		-|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
	877	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:481.222px" %)
	878	+|(% style="background-color:#4f81bd; color:white; width:175px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:152px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:150px" %)**Response**
895	895	|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
896	896	OK
897	897	)))
...	...	@@ -899,8 +899,8 @@
899	899
900	900	)))
901	901
	886	+(% style="display:none" %) (%%)
902	902
903		-
904	904	== 7.12 Rx2 Window Data Rate ==
905	905
906	906
...	...	@@ -907,11 +907,10 @@
907	907	Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
908	908
909	909
910		-(% style="color:blue" %)**AT Command:AT+RX2DR**
	894	+(% style="color:blue" %)**AT Command:  AT+RX2DR**
911	911
912		-(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
913		-|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
914		-|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
	896	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:525.222px" %)
	897	+|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:232px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:130px" %)**Response**
915	915	|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
916	916	OK
917	917	)))
...	...	@@ -919,8 +919,8 @@
919	919
920	920	)))
921	921
	905	+(% style="display:none" %) (%%)
922	922
923		-
924	924	== 7.13 Rx2 Window Frequency ==
925	925
926	926
...	...	@@ -927,11 +927,10 @@
927	927	Feature: Get or Set the Rx2 window frequency
928	928
929	929
930		-(% style="color:blue" %)**AT Command:AT+RX2FQ**
	913	+(% style="color:blue" %)**AT Command:  AT+RX2FQ**
931	931
932		-(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
933		-|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
934		-|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
	915	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:587.222px" %)
	916	+|(% style="background-color:#4f81bd; color:white; width:183px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:240px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:160px" %)**Response**
935	935	|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
936	936	OK
937	937	)))
...	...	@@ -939,19 +939,20 @@
939	939
940	940	)))
941	941
	924	+(% style="display:none" %) (%%)
942	942
943		-
944	944	== 7.14 Transmit Power ==
945	945
946	946
947	947	Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
948	948
	931	+(% style="color:red" %)**Notice: Transmit Power might be changed by ADR from LoRaWAN server. So manually change TXP also remember to set AT+ADR=0 in sensor**
949	949
950		-(% style="color:blue" %)**AT Command:AT+TXP**
951	951
952		-(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
953		-|=(% colspan="3" style="width: 462px;" %)AT+TXP
954		-|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
	934	+(% style="color:blue" %)**AT Command:  AT+TXP**
	935	+
	936	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:465.222px" %)
	937	+|(% style="background-color:#4f81bd; color:white; width:161px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:189px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:112px" %)**Response**
955	955	|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
956	956	OK
957	957	)))
...	...	@@ -963,12 +963,12 @@
963	963
964	964	If the downlink payload=22000100, it means setting the TXP to 0.
965	965
966		-* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
967		-* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
	949	+* **Example 1**: Downlink Payload: **22000102**  ~/~/ Set AT+TXP=2.
968	968
	951	+* **Example 2**: Downlink Payload: **22000000**  ~/~/ Set AT+TXP=0.
969	969
	953	+(% style="display:none" %) (%%)
970	970
971		-
972	972	== 7.15 RSSI of the Last Received Packet ==
973	973
974	974
...	...	@@ -977,15 +977,14 @@
977	977
978	978	(% style="color:blue" %)**AT Command:AT+RSSI**
979	979
980		-(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
981		-|=(% colspan="3" style="width: 554px;" %)AT+RSSI
982		-|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
	963	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:557.222px" %)
	964	+|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:289px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
983	983	|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
984	984	OK
985	985	)))
986	986
	969	+(% style="display:none" %) (%%)
987	987
988		-
989	989	== 7.16 SNR of the Last Received Packet ==
990	990
991	991
...	...	@@ -992,17 +992,16 @@
992	992	Feature: Get the SNR of the last received packet
993	993
994	994
995		-(% style="color:blue" %)**AT Command:AT+SNR**
	977	+(% style="color:blue" %)**AT Command:  AT+SNR**
996	996
997		-(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
998		-|=(% colspan="3" style="width: 568px;" %)AT+SNR
999		-|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
	979	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:571.222px" %)
	980	+|(% style="background-color:#4f81bd; color:white; width:164px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:290px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:113px" %)**Response**
1000	1000	|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
1001	1001	OK
1002	1002	)))
1003	1003
	985	+(% style="display:none" %) (%%)
1004	1004
1005		-
1006	1006	== 7.17 Application Port ==
1007	1007
1008	1008
...	...	@@ -1011,15 +1011,13 @@
1011	1011
1012	1012	(% style="color:blue" %)**AT Command: AT+PORT**
1013	1013
1014		-(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
1015		-|=(% colspan="3" style="width: 497px;" %)AT+PORT
1016		-|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
1017		-|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
	995	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:459px" %)
	996	+|(% style="background-color:#4f81bd; color:white; width:157px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:193px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:104px" %)**Response**
	997	+|(% style="width:157px" %)AT+PORT=?|(% style="width:193px" %)Get the application port|(% style="width:104px" %)21(((
1018	1018	OK
1019	1019	)))
1020		-|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
	1000	+|(% style="width:157px" %)AT+PORT=21|(% style="width:193px" %)Set the application port|(% style="width:104px" %)OK
1021	1021
1022		-
1023	1023	(% style="color:blue" %)**Downlink Command: 0x23**
1024	1024
1025	1025	Format: Command Code (0x23) followed by 1 bytes port value.
...	...	@@ -1026,12 +1026,12 @@
1026	1026
1027	1027	If the downlink payload=2301, it means set the application port to 1, while type code is 23.
1028	1028
1029		-* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
1030		-* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
	1008	+* **Example 1**: Downlink Payload: **2301**  ~/~/ set the application port to 1
1031	1031
	1010	+* **Example 2**: Downlink Payload:** 2305**  ~/~/ set the application port to 5
1032	1032
	1012	+(% style="display:none" %) (%%)
1033	1033
1034		-
1035	1035	== 7.18 Single Channel Mode ==
1036	1036
1037	1037
...	...	@@ -1040,26 +1040,25 @@
1040	1040
1041	1041	(% style="color:blue" %)**AT Command: AT+CHS**
1042	1042
1043		-(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
1044		-|=(% colspan="3" style="width: 600px;" %)AT+CHS
1045		-|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
1046		-|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
	1022	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:584px" %)
	1023	+|(% style="background-color:#4f81bd; color:white; width:182px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:295px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:101px" %)**Response**
	1024	+|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:101px" %)0(((
1047	1047	OK
1048	1048	)))
1049		-|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
	1027	+|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:101px" %)OK
1050	1050
	1029	+(% style="display:none" %) (%%)
1051	1051
1052		-
1053	1053	== 7.19 Eight Channel Mode ==
1054	1054
	1033	+
1055	1055	Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1056	1056
1057	1057
1058	1058	(% style="color:blue" %)**AT Command: AT+CHE**
1059	1059
1060		-(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1061		-|=(% colspan="3" style="width: 707px;" %)AT+CHE
1062		-|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
	1039	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:710.222px" %)
	1040	+|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:198px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:349px" %)**Response**
1063	1063	|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
1064	1064	902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
1065	1065
...	...	@@ -1067,19 +1067,18 @@
1067	1067	)))
1068	1068	|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
1069	1069
	1048	+(% style="color:blue" %)**Downlink Command: 0x24 (LHT65,LHT65N Downlink Command:0x07)**
1070	1070
1071		-(% style="color:blue" %)**Downlink Command: 0x24**
1072		-
1073	1073	Format: Command Code (0x24) followed by 1 bytes channel value.
1074	1074
1075	1075	If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1076	1076
1077		-* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1078		-* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
	1054	+* **Example 1**: Downlink Payload: 2401  ~/~/ set channel mode to 1
1079	1079
	1056	+* **Example 2**: Downlink Payload: 2405  ~/~/ set channel mode to 5
1080	1080
	1058	+(% style="display:none" %) (%%)
1081	1081
1082		-
1083	1083	== 7.20 Get or Set RXwindows1 timeout ==
1084	1084
1085	1085
...	...	@@ -1088,31 +1088,26 @@
1088	1088
1089	1089	(% style="color:blue" %)**AT Command: AT+RX1WTO**
1090	1090
1091		-(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1092		-|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1093		-|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
	1068	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:460.222px" %)
	1069	+|(% style="background-color:#4f81bd; color:white; width:163px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:201px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:93px" %)**Response**
1094	1094	|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
1095	1095	OK
1096	1096	)))
1097	1097	|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1098	1098
1099		-(((
1100		-
	1075	+(% style="display:none" %) (%%)
1101	1101
1102		-**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1103		-
1104		-
	1077	+(((
	1078	+(% style="color:blue" %)**AT+RX1WTO**(%%) is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1105	1105	)))
1106	1106
1107	1107	[[image:image-20220526162535-1.png]]
1108	1108
1109		-
1110	1110	(((
1111	1111	Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1112		-
1113		-
1114	1114	)))
1115	1115
	1087	+
1116	1116	== 7.21 Get or Set RXwindows2 timeout ==
1117	1117
1118	1118
...	...	@@ -1121,16 +1121,15 @@
1121	1121
1122	1122	(% style="color:blue" %)**AT Command: AT+RX2WTO**
1123	1123
1124		-(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1125		-|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1126		-|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1127		-|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
	1096	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:448px" %)
	1097	+|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:192px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:90px" %)**Response**
	1098	+|(% style="width:162px" %)AT+RX2WTO=?|(% style="width:192px" %)Get RXwindows2 timeout|(% style="width:90px" %)7(((
1128	1128	OK
1129	1129	)))
1130		-|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
	1101	+|(% style="width:162px" %)AT+RX2WTO=20|(% style="width:192px" %)Set RXwindows2 timeout|(% style="width:90px" %)OK
1131	1131
	1103	+(% style="display:none" %) (%%)
1132	1132
1133		-
1134	1134	== 7.22 Setting up uplinkdwelltime (as923, au915) ==
1135	1135
1136	1136
...	...	@@ -1139,15 +1139,13 @@
1139	1139
1140	1140	(% style="color:blue" %)**AT Command: AT+DWELLT**
1141	1141
1142		-(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1143		-|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1144		-|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1145		-|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
	1113	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:419px" %)
	1114	+|(% style="background-color:#4f81bd; color:white; width:162px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:157px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:95px" %)**Response**
	1115	+|(% style="width:162px" %)AT+DWELLT=?|(% style="width:157px" %)Get uplinkdwelltime|(% style="width:95px" %)1(((
1146	1146	OK
1147	1147	)))
1148		-|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
	1118	+|(% style="width:162px" %)AT+DWELLT=0|(% style="width:157px" %)Set uplinkdwelltime|(% style="width:95px" %)OK
1149	1149
1150		-
1151	1151	(% style="color:blue" %)**Downlink Command: 0x25**
1152	1152
1153	1153	Format: Command Code (0x25) followed by 1 bytes state value.
...	...	@@ -1154,12 +1154,12 @@
1154	1154
1155	1155	If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1156	1156
1157		-* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1158		-* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
	1126	+* **Example 1**: Downlink Payload: **2501**  ~/~/ set uplinkdwelltime to 1
1159	1159
	1128	+* **Example 2**: Downlink Payload: **2500**  ~/~/ set uplinkdwelltime to 0
1160	1160
	1130	+(% style="display:none" %) (%%)
1161	1161
1162		-
1163	1163	== 7.23 Set Packet Receiving Response Level ==
1164	1164
1165	1165
...	...	@@ -1166,35 +1166,35 @@
1166	1166	Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1167	1167
1168	1168
1169		-RPL value:
	1138	+(% style="color:blue" %)**RPL value:**
1170	1170
1171	1171	* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
	1141	+
1172	1172	* **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
	1143	+
1173	1173	* **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
	1145	+
1174	1174	* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
	1147	+
1175	1175	* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1176	1176
	1150	+(% style="color:blue" %)**Case Analyes:**
1177	1177
1178		-
1179		-Case Analyes:
1180		-
1181	1181	* For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
	1153	+
1182	1182	* For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
	1155	+
1183	1183	* For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1184	1184
1185		-
1186		-
1187	1187	(% style="color:blue" %)**AT Command: AT+RPL**
1188	1188
1189		-(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1190		-|=(% colspan="3" style="width: 533px;" %)AT+RPL
1191		-|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
	1160	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:536.222px" %)
	1161	+|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:263px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:109px" %)**Response**
1192	1192	|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
1193	1193	OK
1194	1194	)))
1195	1195	|(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
1196	1196
1197		-
1198	1198	(% style="color:blue" %)**Downlink Command: 0x21**
1199	1199
1200	1200	Format: Command Code (0x21) followed by 1 bytes level value.
...	...	@@ -1201,30 +1201,32 @@
1201	1201
1202	1202	If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1203	1203
1204		-* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1205		-* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
	1173	+* **Example 1**: Downlink Payload: **2101**  ~/~/ set packet receiving response level to 1
1206	1206
	1175	+* **Example 2**: Downlink Payload: **2102**  ~/~/ set packet receiving response level to 2
1207	1207
	1177	+(% style="display:none" %) (%%)
1208	1208
1209		-
1210	1210	== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1211	1211
1212	1212
1213	1213	(% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1214	1214
1215		-(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1216		-|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1217		-|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1218		-|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
	1184	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:589px" %)
	1185	+|(% style="background-color:#4f81bd; color:white; width:227px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:300px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:87px" %)**Response**
	1186	+|(% style="width:227px" %)AT+SETMAXNBTRANS=1，0|(% style="width:300px" %)Value1: set the maximum NBTrans.|(% style="width:87px" %)1(((
1219	1219	OK
1220	1220	)))
1221		-|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
	1189	+|(% style="width:227px" %)AT+SETMAXNBTRANS=？，1|(% style="width:300px" %)(((
	1190	+value2: 0: uplink fcnt doesn't change for each NBTrans;
	1191	+
	1192	+1: uplink fcnt increase by 1 for each NBTrans.
	1193	+)))|(% style="width:87px" %)(((
1222	1222	1
1223	1223
1224	1224	OK
1225	1225	)))
1226	1226
1227		-
1228	1228	(% style="color:blue" %)**Downlink Command: 0x33**
1229	1229
1230	1230	Format: Command Code (0x33) followed by 2 bytes mode value.
...	...	@@ -1231,25 +1231,29 @@
1231	1231
1232	1232	If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1233	1233
1234		-* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1235		-* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
	1205	+* Example 1: Downlink Payload: 330100  ~/~/ Set AT+SETMAXNBTRANS=1,0
1236	1236
	1207	+* Example 2: Downlink Payload: 330201  ~/~/ Set AT+SETMAXNBTRANS=2,1
1237	1237
	1209	+(% style="display:none" %) (%%)
1238	1238
1239		-
1240	1240	== 7.25 Device offline rejoining （LWS007) ==
1241	1241
1242	1242
1243	1243	(% style="color:blue" %)**AT Command: AT+DDETECT**
1244	1244
1245		-(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1246		-|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1247		-|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
	1216	+AT+DDETECT=<Flag>,<ACK_Timout_1>,<ACK_Timout_2> (Default Value: AT+DDETECT=1,1440,2880)
	1217	+
	1218	+* ACK_Timout_1: Unit: min
	1219	+* ACK_Timout_2: Unit: min
	1220	+
	1221	+(% border="1" style="background-color:#f2f2f2; width:562px" %)
	1222	+|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:272px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:89px" %)**Response**
1248	1248	|(% style="width:160px" %)(((
1249	1249	AT+DDETECT=1,1440,2880
1250	1250
1251	1251	value1
1252		-)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
	1227	+)))|(% style="width:272px" %)Enable online detect|(% style="width:89px" %)(((
1253	1253	1
1254	1254
1255	1255	OK
...	...	@@ -1258,7 +1258,7 @@
1258	1258	AT+DDETECT=1,?,2880
1259	1259
1260	1260	value2
1261		-)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
	1236	+)))|(% style="width:272px" %)Online detection packet sending time|(% style="width:89px" %)(((
1262	1262
1263	1263
1264	1264	OK
...	...	@@ -1267,61 +1267,61 @@
1267	1267	AT+DDETECT=1,1440,？
1268	1268
1269	1269	value3
1270		-)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
	1245	+)))|(% style="width:272px" %)Process rejoin|(% style="width:89px" %)(((
1271	1271
1272	1272
1273	1273	OK
1274	1274	)))
1275	1275
	1251	+(% style="color:blue" %)**Downlink Command: 0x32**
1276	1276
1277		-(% style="color:blue" %)**Downlink Command: 0x33**
1278		-
1279	1279	Format: Command Code (0x32) followed by 2 bytes mode value.
1280	1280
1281		-If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
	1255	+If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 32.
1282	1282
1283		-* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
	1257	+* **Example 1:** Downlink Payload: 320105A00B40  ~/~/ Set AT+DDETECT=1,1440,2880
1284	1284
	1259	+*
	1260	+** 0x01 : Flag
	1261	+** 0x05A0: ACK_Timout_1 : 1440minutes (24 hours)
	1262	+** 0x0B40: ACK_Timout_2 : 2880minutes (48 hours)
	1263	+** **Explain**: Enable Online Detect, if end node doesn't receive any downlink within ACK_Timout_1( 1440 minutes or 24 hours). End node will use confirmed uplink to send packets during ACK_Timout_1 (the 24th hour) to ACK_Timout_2 ( the 48th hour). If from the 24th to 48th hour, end node got an downlink from server, it will switch back to unconfirmed uplink. end node will restart ACK_Timout_1. If from the 24th to 48th hour, end node still not got any downlink, means device doesn't get ACK from server within last 48 hours. Device will process rejoin, rejoin request interval is AT+RJTDC period. For AU915/ US915, device will use the sub-band used for last join.
1285	1285
	1265	+(% style="display:none" %) (%%)
1286	1286
1287		-
1288	1288	== 7.26 Request the server to send an ACK ==
1289	1289
1290	1290
1291	1291	(% style="color:blue" %)**AT Command: AT+PNACKMD**
1292	1292
1293		-(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1294		-|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1295		-|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1296		-|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
	1272	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:889px" %)
	1273	+|(% style="background-color:#4f81bd; color:white; width:160px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:627px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:100px" %)**Response**
	1274	+|(% style="width:160px" %)AT+PNACKMD=1|(% style="width:627px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:100px" %)1(((
1297	1297	OK
1298	1298	)))
1299		-|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
	1277	+|(% style="width:160px" %)AT+PNACKMD=0|(% style="width:627px" %)off request the server to send an ACK|(% style="width:100px" %)(((
1300	1300	0
1301		-
1302	1302	OK
1303	1303	)))
1304	1304
	1282	+(% style="display:none" %) (%%)
1305	1305
1306		-
1307	1307	== 7.27 Adjust network rejoining interval ==
1308	1308
1309	1309
1310	1310	(% style="color:blue" %)**AT Command: AT+RJTDC**
1311	1311
1312		-(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1313		-|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1314		-|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1315		-|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
	1289	+(% border="1" cellspacing="4" style="background-color:#f2f2f2; width:889px" %)
	1290	+|(% style="background-color:#4f81bd; color:white; width:165px" %)**Command Example**|(% style="background-color:#4f81bd; color:white; width:357px" %)**Function**|(% style="background-color:#4f81bd; color:white; width:361px" %)**Response**
	1291	+|(% style="width:165px" %)AT+RJTDC=?|(% style="width:357px" %)Show the ReJoin data transmission interval in min|(% style="width:361px" %)30(((
1316	1316	OK
1317	1317
1318		-the interval is 30000ms = 30s
	1294	+the interval is 30 min
1319	1319	)))
1320		-|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1321		-Set the ReJoin data transmission interval to 60000ms = 60 seconds
	1296	+|(% style="width:165px" %)AT+RJTDC=60|(% style="width:357px" %)Set the ReJoin data transmission interval in min|(% style="width:361px" %)OK(((
	1297	+Set the ReJoin data transmission interval to 60 min
1322	1322	)))
1323	1323
1324		-
1325	1325	(% style="color:blue" %)**Downlink Command: 0x26**
1326	1326
1327	1327	Format: Command Code (0x26) followed by 2 bytes mode value.
...	...	@@ -1328,27 +1328,34 @@
1328	1328
1329	1329	If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1330	1330
1331		-* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1332		-* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
	1306	+* **Example 1:** Downlink Payload: 26000A  ~/~/  Set AT+RJTDC=10
1333	1333
	1308	+* **Example 2: **Downlink Payload: 260002  ~/~/  Set AT+RJTDC=2
1334	1334
	1310	+(% style="display:none" %) (%%)
1335	1335
1336		-
1337	1337	= 8. AT Commands Combination =
1338	1338
1339	1339	== 8.1 Set a fix RX2DR for downlink window ==
1340	1340
1341		-* **AT+ADR=0 **~-~-> Disable ADR first
1342		-* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
1343	1343
	1317	+* (% style="color:blue" %)**AT+ADR=0             **(%%) **~/~/**  Disable ADR first
	1318	+
	1319	+* (% style="color:blue" %)**AT+RX2DR=xxxx**   (%%) **~/~/**  Set xxxx to your wanted DataRate
	1320	+
	1321	+(% style="display:none" %) (%%)
	1322	+
1344	1344	== 8.2 Use Downlink Command to set a fix uplink DR ==
1345	1345
1346	1346
1347	1347	(% style="color:blue" %)**Downlink Command: 0x22000500**
1348	1348
	1328	+**Same as:**
1349	1349
1350		-Same as:
	1330	+* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1351	1351
1352		-* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1353		-* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1354		-* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
	1332	+* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
	1333	+
	1334	+* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
	1335	+
	1336	+