Summary

• Page properties (1 modified, 0 added, 0 removed)

Details

Page properties

Content

...	...	@@ -27,6 +27,7 @@
27	27	** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
28	28
29	29
	30	+
30	30	= 3. Support End Node and firmware version =
31	31
32	32
...	...	@@ -101,6 +101,8 @@
101	101	)))
102	102	)))
103	103
	105	+
	106	+
104	104	= 4. System Management Commands =
105	105
106	106
...	...	@@ -109,7 +109,6 @@
109	109
110	110	Feature: Change LoRaWAN End Node Transmit Interval.
111	111
112		-
113	113	(% style="color:blue" %)**AT Command: AT+TDC**
114	114
115	115	(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
...	...	@@ -140,6 +140,7 @@
140	140	* **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
141	141
142	142
	145	+
143	143	== 4.2 Reboot End Node ==
144	144
145	145
...	...	@@ -148,6 +148,7 @@
148	148
149	149	(% style="color:blue" %)**AT Command: ATZ**
150	150
	154	+
151	151	(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
152	152	|=(% colspan="3" %)ATZ: Trig a reset of the MCU
153	153	|**Command Example**|**Function**|**Response**
...	...	@@ -165,8 +165,10 @@
165	165	<followed by the Tx and Rx information>
166	166	)))
167	167
	172	+
168	168	(% style="color:blue" %)**Downlink Command: 0x04**
169	169
	175	+
170	170	(((
171	171	Format: Command Code (0x04) followed by FF.
172	172	)))
...	...	@@ -182,7 +182,6 @@
182	182
183	183	Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
184	184
185		-
186	186	(% style="color:blue" %)**AT Command: AT+FDR**
187	187
188	188	(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
...	...	@@ -202,8 +202,10 @@
202	202	Please set the parameters or reset Device to apply change
203	203	)))
204	204
	210	+
205	205	(% style="color:blue" %)**Downlink Command: 0x04**
206	206
	213	+
207	207	(((
208	208	Format: Command Code (0x04) followed by FE.
209	209	)))
...	...	@@ -215,12 +215,12 @@
215	215
216	216	== 4.4 Show Firmware Version ==
217	217
218		-
219	219	Feature: Show firmware version. No downlink command yet.
220	220
221	221
222	222	(% style="color:blue" %)**AT Command: AT+VER**
223	223
	230	+
224	224	(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
225	225	|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
226	226	|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
...	...	@@ -230,8 +230,10 @@
230	230	OK
231	231	)))
232	232
	240	+
233	233	(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
234	234
	243	+
235	235	(((
236	236	Downlink Format: 0x26
237	237	)))
...	...	@@ -241,9 +241,6 @@
241	241	)))
242	242
243	243	(((
244		-
245		-
246		-
247	247	**xx: Software Type:**
248	248	)))
249	249
...	...	@@ -252,9 +252,6 @@
252	252	* 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
253	253
254	254	(((
255		-
256		-
257		-
258	258	**yy: Frequency Band:**
259	259	)))
260	260
...	...	@@ -270,9 +270,6 @@
270	270	* 0xa0: AS923-3
271	271
272	272	(((
273		-
274		-
275		-
276	276	**zz: Subband**
277	277	)))
278	278
...	...	@@ -281,12 +281,12 @@
281	281
282	282	== 4.5 Show System Configure ==
283	283
284		-
285	285	Feature: Show All configure. No downlink command yet.
286	286
287	287
288	288	(% style="color:blue" %)**AT Command: AT+CFG**
289	289
	289	+
290	290	(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
291	291	|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
292	292	|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
...	...	@@ -304,18 +304,16 @@
304	304	OK
305	305	)))
306	306
307		-
308	308	= 5. Keys, IDs and EUIs management =
309	309
310		-
311	311	== 5.1 Application EUI ==
312	312
313		-
314	314	Feature: Get or Set the Application EUI.
315	315
316	316
317	317	(% style="color:blue" %)**AT Command: AT+APPEUI**
318	318
	316	+
319	319	(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
320	320	|=(% colspan="3" style="width: 683px;" %)AT+APPEUI
321	321	|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
...	...	@@ -324,15 +324,14 @@
324	324	)))
325	325	|(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
326	326
327		-
328	328	== 5.2 Application Key ==
329	329
330		-
331	331	Feature: Get or Set the Application Key.
332	332
333	333
334	334	(% style="color:blue" %)**AT Command: AT+APPKEY**
335	335
	332	+
336	336	(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
337	337	|=(% colspan="3" style="width: 973px;" %)AT+APPKEY
338	338	|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
...	...	@@ -341,15 +341,14 @@
341	341	)))
342	342	|(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
343	343
344		-
345	345	== 5.3 Application Session Key ==
346	346
347		-
348	348	Feature: Get or Set the Application Session Key.
349	349
350	350
351	351	(% style="color:blue" %)**AT Command: AT+APPSKEY**
352	352
	348	+
353	353	(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
354	354	|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
355	355	|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
...	...	@@ -360,15 +360,14 @@
360	360	OK
361	361	)))
362	362
363		-
364	364	== 5.4 Device Address ==
365	365
366		-
367	367	Feature: Get or Set the Device Address.
368	368
369	369
370	370	(% style="color:blue" %)**AT Command: AT+DADDR**
371	371
	366	+
372	372	(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
373	373	|=(% colspan="3" style="width: 792px;" %)AT+DADDR
374	374	|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
...	...	@@ -379,15 +379,14 @@
379	379	)))
380	380	|(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
381	381
382		-
383	383	== 5.5 Device EUI ==
384	384
385		-
386	386	Feature: Get or Set the Device EUI.
387	387
388	388
389	389	(% style="color:blue" %)**AT Command: AT+DEUI**
390	390
	384	+
391	391	(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
392	392	|=(% colspan="3" style="width: 1032px;" %)AT+DEUI
393	393	|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
...	...	@@ -398,15 +398,14 @@
398	398	OK
399	399	)))
400	400
401		-
402	402	== 5.6 Network ID ==
403	403
404		-
405	405	Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
406	406
407	407
408	408	(% style="color:blue" %)**AT Command: AT+NWKID**
409	409
	402	+
410	410	(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
411	411	|=(% colspan="3" style="width: 445px;" %)AT+NWKID
412	412	|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
...	...	@@ -415,15 +415,14 @@
415	415	)))
416	416	|(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
417	417
418		-
419	419	== 5.7 Network Session Key ==
420	420
421		-
422	422	Feature: Get or Set the Network Session Key
423	423
424	424
425	425	(% style="color:blue" %)**AT Command: AT+NWKSKEY**
426	426
	418	+
427	427	(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
428	428	|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
429	429	|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
...	...	@@ -432,21 +432,18 @@
432	432	)))
433	433	|(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
434	434
435		-
436	436	= 6. Joining and sending date on LoRaWAN network =
437	437
438		-
439	439	== 6.1 Confirm Mode ==
440	440
	431	+=== AT+CFM command before DR-LWS007 software stack ===
441	441
442		-=== 6.1.1  AT+CFM command before DR-LWS007 software stack ===
443		-
444		-
445	445	Feature: Get or Set the confirmation mode (0-1).
446	446
447	447
448	448	(% style="color:blue" %)**AT Command: AT+CFM**
449	449
	438	+
450	450	(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
451	451	|=(% colspan="3" style="width: 707px;" %)AT+CFM
452	452	|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
...	...	@@ -465,13 +465,12 @@
465	465	* Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
466	466	* Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
467	467
	457	+=== AT+CFM command since DR-LWS007 software stack ===
468	468
469	469
470		-=== 6.1.2  AT+CFM command since DR-LWS007 software stack ===
471		-
472		-
473	473	(% style="color:blue" %)**AT Command: AT+CFM**
474	474
	462	+
475	475	(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
476	476	|=(% colspan="3" style="width: 707px;" %)AT+CFM
477	477	|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
...	...	@@ -503,8 +503,10 @@
503	503	OK
504	504	)))
505	505
	494	+
506	506	(% style="color:blue" %)**Downlink Command: 0x05**
507	507
	497	+
508	508	Format: Command Code (0x05) followed by 2 bytes mode value.
509	509
510	510	If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
...	...	@@ -512,16 +512,14 @@
512	512	* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
513	513	* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
514	514
515		-
516		-
517	517	== 6.2 Confirm Status ==
518	518
519		-
520	520	Feature: Get confirmation status of the last AT+SEND (0-1).
521	521
522	522
523	523	(% style="color:blue" %)**AT Command: AT+CFS**
524	524
	512	+
525	525	(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
526	526	|=(% colspan="3" style="width: 531px;" %)AT+CFS
527	527	|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
...	...	@@ -529,15 +529,14 @@
529	529	OK
530	530	)))
531	531
532		-
533	533	== 6.3 Join LoRa® Network ==
534	534
535		-
536	536	Feature: Join network.
537	537
538	538
539	539	(% style="color:blue" %)**AT Command: AT+JOIN**
540	540
	527	+
541	541	(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
542	542	|=(% colspan="3" style="width: 644px;" %)AT+JOIN
543	543	|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
...	...	@@ -547,15 +547,14 @@
547	547	While Error in format, return AT_BUSY_ERROR
548	548	)))
549	549
550		-
551	551	== 6.4 LoRa® Network Join Mode ==
552	552
553		-
554	554	Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
555	555
556	556
557	557	(% style="color:blue" %)**AT Command: AT+NJM**
558	558
	544	+
559	559	(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
560	560	|=(% colspan="3" style="width: 750px;" %)AT+NJM
561	561	|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
...	...	@@ -565,8 +565,10 @@
565	565	|(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
566	566	|(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
567	567
	554	+
568	568	(% style="color:blue" %)**Downlink Command: 0x20**
569	569
	557	+
570	570	Format: Command Code (0x20) followed by 1 bytes mode value.
571	571
572	572	If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
...	...	@@ -574,16 +574,14 @@
574	574	* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
575	575	* **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
576	576
577		-
578		-
579	579	== 6.5 LoRa® Network Join Status ==
580	580
581		-
582	582	Feature: LoRa® Network Join Status.
583	583
584	584
585	585	(% style="color:blue" %)**AT Command: AT+NJS**
586	586
	572	+
587	587	(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
588	588	|=(% colspan="3" style="width: 495px;" %)AT+NJS
589	589	|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
...	...	@@ -591,15 +591,14 @@
591	591	OK
592	592	)))
593	593
594		-
595	595	== 6.6 Print Last Received Data in Raw Format ==
596	596
597		-
598	598	Feature: Print Last Received Data in Raw Format<port:data>.
599	599
600	600
601	601	(% style="color:blue" %)**AT Command: AT+RECV**
602	602
	587	+
603	603	(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
604	604	|=(% colspan="3" style="width: 584px;" %)AT+RECV
605	605	|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
...	...	@@ -607,15 +607,14 @@
607	607	OK
608	608	)))
609	609
610		-
611	611	== 6.7 Print Last Received Data in Binary Format ==
612	612
613		-
614	614	Feature: Print Last Received Data in Binary Format<port:data>.
615	615
616	616
617	617	(% style="color:blue" %)**AT Command: AT+RECVB**
618	618
	602	+
619	619	(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
620	620	|=(% colspan="3" style="width: 790px;" %)AT+RECVB
621	621	|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
...	...	@@ -623,15 +623,14 @@
623	623	OK
624	624	)))
625	625
626		-
627	627	== 6.8 Send Text Data ==
628	628
629		-
630	630	Feature: Send Text Data<port:data>.
631	631
632	632
633	633	(% style="color:blue" %)**AT Command: AT+SEND**
634	634
	617	+
635	635	(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
636	636	|=(% colspan="3" style="width: 988px;" %)AT+SEND
637	637	|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
...	...	@@ -643,15 +643,14 @@
643	643
644	644	)))
645	645
646		-
647	647	== 6.9 Send Hexadecimal Data ==
648	648
649		-
650	650	Feature: Send hexadecimal data along with the application port.
651	651
652	652
653	653	(% style="color:blue" %)**AT Command: AT+SENDB**
654	654
	636	+
655	655	(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
656	656	|=(% colspan="3" style="width: 1117px;" %)AT+SENDB
657	657	|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
...	...	@@ -662,18 +662,16 @@
662	662
663	663	)))
664	664
665		-
666	666	= 7. LoRaWAN network management =
667	667
668		-
669	669	== 7.1 Adaptive Data Rate ==
670	670
671		-
672	672	Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
673	673
674	674
675	675	(% style="color:blue" %)**AT Command: AT+ADR**
676	676
	656	+
677	677	(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
678	678	|=(% colspan="3" style="width: 680px;" %)AT+ADR
679	679	|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
...	...	@@ -685,23 +685,24 @@
685	685	AT_PARAM_ERROR
686	686	)))
687	687
	668	+
688	688	(% style="color:blue" %)**Downlink Command: 0x22**
689	689
	671	+
	672	+
690	690	If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
691	691
692		-* **Example 1**: Downlink Payload: **2201**  ~/~/ Set AT+ADR=1.
	675	+* **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
693	693	* **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
694	694
695		-
696		-
697	697	== 7.2 LoRa® Class ==
698	698
699		-
700	700	Feature: Get or Set the Device Class(Currently only support class A, class C).
701	701
702	702
703	703	(% style="color:blue" %)**AT Command:AT+CLASS**
704	704
	685	+
705	705	(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
706	706	|=(% colspan="3" style="width: 504px;" %)AT+CLASS
707	707	|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
...	...	@@ -712,15 +712,14 @@
712	712
713	713	)))
714	714
715		-
716	716	== 7.3 Duty Cycle Setting ==
717	717
718		-
719	719	Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
720	720
721	721
722	722	(% style="color:blue" %)**AT Command:AT+DCS**
723	723
	703	+
724	724	(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
725	725	|=(% colspan="3" style="width: 512px;" %)AT+DCS
726	726	|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
...	...	@@ -731,15 +731,14 @@
731	731
732	732	)))
733	733
734		-
735	735	== 7.4 Data Rate ==
736	736
737		-
738	738	Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
739	739
740	740
741	741	(% style="color:blue" %)**AT Command: AT+DR**
742	742
	721	+
743	743	(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
744	744	|=(% colspan="3" style="width: 463px;" %)AT+DR
745	745	|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
...	...	@@ -750,23 +750,24 @@
750	750
751	751	)))
752	752
	732	+
753	753	(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
754	754
	735	+
	736	+
755	755	If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
756	756
757	757	* **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
758	758	* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
759	759
760		-
761		-
762	762	== 7.5 Frame Counter Downlink ==
763	763
764		-
765	765	Feature: Get or Set the Frame Counter Downlink.
766	766
767	767
768	768	(% style="color:blue" %)**AT Command:AT+FCD**
769	769
	749	+
770	770	(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
771	771	|=(% colspan="3" style="width: 690px;" %)AT+FCD
772	772	|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
...	...	@@ -775,9 +775,10 @@
775	775	)))
776	776	|(% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((
777	777	OK
	758	+
	759	+
778	778	)))
779	779
780		-
781	781	== 7.6 Frame Counter Uplink ==
782	782
783	783	Feature: Get or Set the Frame Counter Uplink.
...	...	@@ -785,6 +785,7 @@
785	785
786	786	(% style="color:blue" %)**AT Command:AT+FCU**
787	787
	769	+
788	788	(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
789	789	|=(% colspan="3" style="width: 531px;" %)AT+FCU
790	790	|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
...	...	@@ -795,15 +795,14 @@
795	795
796	796	)))
797	797
798		-
799	799	== 7.7 Join Accept Delay1 ==
800	800
801		-
802	802	Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
803	803
804	804
805	805	(% style="color:blue" %)**AT Command:AT+JN1DL**
806	806
	787	+
807	807	(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
808	808	|=(% colspan="3" style="width: 534px;" %)AT+JN1DL
809	809	|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
...	...	@@ -814,7 +814,6 @@
814	814
815	815	)))
816	816
817		-
818	818	== 7.8 Join Accept Delay2 ==
819	819
820	820	Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
...	...	@@ -822,6 +822,7 @@
822	822
823	823	(% style="color:blue" %)**AT Command:AT+JN2DL**
824	824
	805	+
825	825	(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
826	826	|=(% colspan="3" style="width: 535px;" %)AT+JN2DL
827	827	|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
...	...	@@ -832,17 +832,16 @@
832	832
833	833	)))
834	834
835		-
836	836	== 7.9 Public Network Mode ==
837	837
838		-
839	839	Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
840	840
841		-(% style="color:red" %)Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
	820	+Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
842	842
843	843
844	844	(% style="color:blue" %)**AT Command:AT+PNM**
845	845
	825	+
846	846	(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
847	847	|=(% colspan="3" style="width: 664px;" %)AT+PNM
848	848	|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
...	...	@@ -860,15 +860,14 @@
860	860	)))
861	861	|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
862	862
863		-
864	864	== 7.10 Receive Delay1 ==
865	865
866		-
867	867	Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
868	868
869	869
870	870	(% style="color:blue" %)**AT Command:AT+RX1DL**
871	871
	850	+
872	872	(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
873	873	|=(% colspan="3" style="width: 405px;" %)AT+RX1DL
874	874	|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
...	...	@@ -879,16 +879,14 @@
879	879
880	880	)))
881	881
882		-
883		-
884	884	== 7.11 Receive Delay2 ==
885	885
886		-
887	887	Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
888	888
889	889
890	890	(% style="color:blue" %)**AT Command:AT+RX2DL**
891	891
	868	+
892	892	(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
893	893	|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
894	894	|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
...	...	@@ -899,16 +899,14 @@
899	899
900	900	)))
901	901
902		-
903		-
904	904	== 7.12 Rx2 Window Data Rate ==
905	905
906		-
907	907	Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
908	908
909	909
910	910	(% style="color:blue" %)**AT Command:AT+RX2DR**
911	911
	886	+
912	912	(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
913	913	|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
914	914	|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
...	...	@@ -919,16 +919,14 @@
919	919
920	920	)))
921	921
922		-
923		-
924	924	== 7.13 Rx2 Window Frequency ==
925	925
926		-
927	927	Feature: Get or Set the Rx2 window frequency
928	928
929	929
930	930	(% style="color:blue" %)**AT Command:AT+RX2FQ**
931	931
	904	+
932	932	(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
933	933	|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
934	934	|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
...	...	@@ -939,16 +939,14 @@
939	939
940	940	)))
941	941
942		-
943		-
944	944	== 7.14 Transmit Power ==
945	945
946		-
947	947	Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
948	948
949	949
950	950	(% style="color:blue" %)**AT Command:AT+TXP**
951	951
	922	+
952	952	(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
953	953	|=(% colspan="3" style="width: 462px;" %)AT+TXP
954	954	|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
...	...	@@ -966,17 +966,14 @@
966	966	* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
967	967	* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
968	968
969		-
970		-
971		-
972	972	== 7.15 RSSI of the Last Received Packet ==
973	973
974		-
975	975	Feature: Get or Set the Rx2 window frequency
976	976
977	977
978	978	(% style="color:blue" %)**AT Command:AT+RSSI**
979	979
	947	+
980	980	(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
981	981	|=(% colspan="3" style="width: 554px;" %)AT+RSSI
982	982	|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
...	...	@@ -984,16 +984,14 @@
984	984	OK
985	985	)))
986	986
987		-
988		-
989	989	== 7.16 SNR of the Last Received Packet ==
990	990
991		-
992	992	Feature: Get the SNR of the last received packet
993	993
994	994
995	995	(% style="color:blue" %)**AT Command:AT+SNR**
996	996
	962	+
997	997	(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
998	998	|=(% colspan="3" style="width: 568px;" %)AT+SNR
999	999	|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
...	...	@@ -1001,16 +1001,14 @@
1001	1001	OK
1002	1002	)))
1003	1003
1004		-
1005		-
1006	1006	== 7.17 Application Port ==
1007	1007
1008		-
1009	1009	Feature: Get or set the application port.
1010	1010
1011	1011
1012	1012	(% style="color:blue" %)**AT Command: AT+PORT**
1013	1013
	977	+
1014	1014	(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
1015	1015	|=(% colspan="3" style="width: 497px;" %)AT+PORT
1016	1016	|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
...	...	@@ -1022,6 +1022,7 @@
1022	1022
1023	1023	(% style="color:blue" %)**Downlink Command: 0x23**
1024	1024
	989	+
1025	1025	Format: Command Code (0x23) followed by 1 bytes port value.
1026	1026
1027	1027	If the downlink payload=2301, it means set the application port to 1, while type code is 23.
...	...	@@ -1029,17 +1029,14 @@
1029	1029	* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
1030	1030	* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
1031	1031
1032		-
1033		-
1034		-
1035	1035	== 7.18 Single Channel Mode ==
1036	1036
1037		-
1038	1038	Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
1039	1039
1040	1040
1041	1041	(% style="color:blue" %)**AT Command: AT+CHS**
1042	1042
	1004	+
1043	1043	(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
1044	1044	|=(% colspan="3" style="width: 600px;" %)AT+CHS
1045	1045	|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
...	...	@@ -1048,8 +1048,6 @@
1048	1048	)))
1049	1049	|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
1050	1050
1051		-
1052		-
1053	1053	== 7.19 Eight Channel Mode ==
1054	1054
1055	1055	Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
...	...	@@ -1057,6 +1057,7 @@
1057	1057
1058	1058	(% style="color:blue" %)**AT Command: AT+CHE**
1059	1059
	1020	+
1060	1060	(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1061	1061	|=(% colspan="3" style="width: 707px;" %)AT+CHE
1062	1062	|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
...	...	@@ -1070,6 +1070,7 @@
1070	1070
1071	1071	(% style="color:blue" %)**Downlink Command: 0x24**
1072	1072
	1034	+
1073	1073	Format: Command Code (0x24) followed by 1 bytes channel value.
1074	1074
1075	1075	If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
...	...	@@ -1077,17 +1077,14 @@
1077	1077	* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1078	1078	* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
1079	1079
1080		-
1081		-
1082		-
1083	1083	== 7.20 Get or Set RXwindows1 timeout ==
1084	1084
	1044	+Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1085	1085
1086		-Feature: Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1087	1087
1088		-
1089	1089	(% style="color:blue" %)**AT Command: AT+RX1WTO**
1090	1090
	1049	+
1091	1091	(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1092	1092	|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1093	1093	|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
...	...	@@ -1097,16 +1097,11 @@
1097	1097	|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1098	1098
1099	1099	(((
1100		-
1101		-
1102	1102	**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1103		-
1104		-
1105	1105	)))
1106	1106
1107	1107	[[image:image-20220526162535-1.png]]
1108	1108
1109		-
1110	1110	(((
1111	1111	Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1112	1112
...	...	@@ -1115,12 +1115,12 @@
1115	1115
1116	1116	== 7.21 Get or Set RXwindows2 timeout ==
1117	1117
	1072	+Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1118	1118
1119		-Feature: Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1120	1120
1121		-
1122	1122	(% style="color:blue" %)**AT Command: AT+RX2WTO**
1123	1123
	1077	+
1124	1124	(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1125	1125	|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1126	1126	|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
...	...	@@ -1129,16 +1129,14 @@
1129	1129	)))
1130	1130	|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
1131	1131
1132		-
1133		-
1134	1134	== 7.22 Setting up uplinkdwelltime (as923, au915) ==
1135	1135
1136		-
1137	1137	Feature: Get or Set uplinkdwelltime
1138	1138
1139	1139
1140	1140	(% style="color:blue" %)**AT Command: AT+DWELLT**
1141	1141
	1093	+
1142	1142	(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1143	1143	|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1144	1144	|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
...	...	@@ -1150,6 +1150,7 @@
1150	1150
1151	1151	(% style="color:blue" %)**Downlink Command: 0x25**
1152	1152
	1105	+
1153	1153	Format: Command Code (0x25) followed by 1 bytes state value.
1154	1154
1155	1155	If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
...	...	@@ -1157,15 +1157,10 @@
1157	1157	* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1158	1158	* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
1159	1159
1160		-
1161		-
1162		-
1163	1163	== 7.23 Set Packet Receiving Response Level ==
1164	1164
1165		-
1166	1166	Feature: Get or Set packet receiving response level. This feature is used to set compatible with different LoRaWAN servers. If RPL doesn;t match , user will see strange message in the server portal.
1167	1167
1168		-
1169	1169	RPL value:
1170	1170
1171	1171	* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
...	...	@@ -1174,8 +1174,6 @@
1174	1174	* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1175	1175	* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1176	1176
1177		-
1178		-
1179	1179	Case Analyes:
1180	1180
1181	1181	* For Class A devices, AT+RPL=0 is ok. that is defaut settings in software.
...	...	@@ -1183,9 +1183,9 @@
1183	1183	* For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1184	1184
1185	1185
1186		-
1187	1187	(% style="color:blue" %)**AT Command: AT+RPL**
1188	1188
	1134	+
1189	1189	(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1190	1190	|=(% colspan="3" style="width: 533px;" %)AT+RPL
1191	1191	|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
...	...	@@ -1197,6 +1197,7 @@
1197	1197
1198	1198	(% style="color:blue" %)**Downlink Command: 0x21**
1199	1199
	1146	+
1200	1200	Format: Command Code (0x21) followed by 1 bytes level value.
1201	1201
1202	1202	If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
...	...	@@ -1204,14 +1204,12 @@
1204	1204	* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1205	1205	* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1206	1206
1207		-
1208		-
1209		-
1210	1210	== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1211	1211
1212	1212
1213	1213	(% style="color:blue" %)**AT Command: AT+SETMAXNBTRANS **
1214	1214
	1159	+
1215	1215	(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1216	1216	|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1217	1217	|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
...	...	@@ -1227,6 +1227,7 @@
1227	1227
1228	1228	(% style="color:blue" %)**Downlink Command: 0x33**
1229	1229
	1175	+
1230	1230	Format: Command Code (0x33) followed by 2 bytes mode value.
1231	1231
1232	1232	If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
...	...	@@ -1234,14 +1234,12 @@
1234	1234	* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1235	1235	* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1236	1236
1237		-
1238		-
1239		-
1240	1240	== 7.25 Device offline rejoining （LWS007) ==
1241	1241
1242	1242
1243	1243	(% style="color:blue" %)**AT Command: AT+DDETECT**
1244	1244
	1188	+
1245	1245	(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1246	1246	|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1247	1247	|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
...	...	@@ -1273,9 +1273,10 @@
1273	1273	OK
1274	1274	)))
1275	1275
	1220	+{{info}}
	1221	+**Downlink Command: 0x33**
	1222	+{{/info}}
1276	1276
1277		-(% style="color:blue" %)**Downlink Command: 0x33**
1278		-
1279	1279	Format: Command Code (0x32) followed by 2 bytes mode value.
1280	1280
1281	1281	If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
...	...	@@ -1282,14 +1282,12 @@
1282	1282
1283	1283	* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1284	1284
1285		-
1286		-
1287		-
1288	1288	== 7.26 Request the server to send an ACK ==
1289	1289
	1232	+{{info}}
	1233	+**AT Command: AT+PNACKMD**
	1234	+{{/info}}
1290	1290
1291		-(% style="color:blue" %)**AT Command: AT+PNACKMD**
1292		-
1293	1293	(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1294	1294	|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1295	1295	|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
...	...	@@ -1302,13 +1302,12 @@
1302	1302	OK
1303	1303	)))
1304	1304
1305		-
1306		-
1307	1307	== 7.27 Adjust network rejoining interval ==
1308	1308
	1250	+{{info}}
	1251	+**AT Command: AT+RJTDC**
	1252	+{{/info}}
1309	1309
1310		-(% style="color:blue" %)**AT Command: AT+RJTDC**
1311		-
1312	1312	(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1313	1313	|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1314	1314	|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
...	...	@@ -1321,9 +1321,10 @@
1321	1321	Set the ReJoin data transmission interval to 60000ms = 60 seconds
1322	1322	)))
1323	1323
	1266	+{{info}}
	1267	+**Downlink Command: 0x26**
	1268	+{{/info}}
1324	1324
1325		-(% style="color:blue" %)**Downlink Command: 0x26**
1326		-
1327	1327	Format: Command Code (0x26) followed by 2 bytes mode value.
1328	1328
1329	1329	If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
...	...	@@ -1331,9 +1331,6 @@
1331	1331	* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1332	1332	* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1333	1333
1334		-
1335		-
1336		-
1337	1337	= 8. AT Commands Combination =
1338	1338
1339	1339	== 8.1 Set a fix RX2DR for downlink window ==
...	...	@@ -1343,12 +1343,13 @@
1343	1343
1344	1344	== 8.2 Use Downlink Command to set a fix uplink DR ==
1345	1345
	1286	+{{info}}
	1287	+**Downlink Command: 0x22000500**
	1288	+{{/info}}
1346	1346
1347		-(% style="color:blue" %)**Downlink Command: 0x22000500**
1348		-
1349		-
1350	1350	Same as:
1351	1351
1352	1352	* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1353	1353	* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1354	1354	* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
	1295	+~)~)~)