Changes for page End Device AT Commands and Downlink Command

Last modified by kai on 2024/09/06 10:00

From version < 49.1 >

edited by Edwin Chen
on 2022/06/15 14:43

To version < 50.6 >

edited by Xiaoling
on 2022/07/13 12:01

Change comment: There is no comment for this version

Raw
Rendered

Summary

Page properties (2 modified, 0 added, 0 removed)

Details

Page properties

Author

@@ -1,1 +1,1 @@
--XWiki.Edwin
++XWiki.Xiaoling

Content

@@ -1,4 +1,4 @@
--    **Contents：**
++    **Table of** **Contents：**
  {{toc/}}
@@ -6,6 +6,7 @@
  = 1. Introduction =
++
  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
@@ -18,6 +18,7 @@
  = 2. How to use AT Commands or Downlink command =
++
  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
@@ -24,8 +24,11 @@
  ** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
++
++
  = 3. Support End Node and firmware version =
++
  (% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
  |=(% colspan="3" style="width: 963px;" %)(((
  Dragino STM32 base hardware Firmware / LoRaWAN stack list
@@ -97,16 +97,17 @@
  )))
  )))
++
++
  = 4. System Management Commands =
++
  == 4.1 Change Uplink Interval ==
++
  Feature: Change LoRaWAN End Node Transmit Interval.
--(% class="box infomessage" %)
--(((
--**AT Command: AT+TDC**
--)))
++(% style="color:blue" %)**AT Command: AT+TDC**
  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
  |=(% colspan="3" style="width: 724px;" %)AT+TDC
@@ -120,11 +120,11 @@
  Set transmit interval to 60000ms = 60 seconds
  )))
--{{info}}
--**Downlink Command: 0x01**
--{{/info}}
--
  (((
++
++
++(% style="color:blue" %)**Downlink Command: 0x01**
++
  Format: Command Code (0x01) followed by 3 bytes time value.
  )))
@@ -135,14 +135,17 @@
  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
++
++
  == 4.2 Reboot End Node ==
++
  Feature: Reboot End Node to perform a new OTAA or ABP Join.
--{{info}}
--**AT Command: ATZ**
--{{/info}}
++(% style="color:blue" %)**AT Command: ATZ**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
  |**Command Example**|**Function**|**Response**
@@ -160,10 +160,10 @@
  <followed by the Tx and Rx information>
  )))
--{{info}}
--**Downlink Command: 0x04**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x04**
++
++
  (((
  Format: Command Code (0x04) followed by FF.
  )))
@@ -176,11 +176,10 @@
  == 4.3 Reset to factory Default ==
++
  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
--{{info}}
--**AT Command: AT+FDR**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+FDR**
  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
@@ -199,10 +199,10 @@
  Please set the parameters or reset Device to apply change
  )))
--{{info}}
--**Downlink Command: 0x04**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x04**
++
++
  (((
  Format: Command Code (0x04) followed by FE.
  )))
@@ -216,10 +216,10 @@
  Feature: Show firmware version. No downlink command yet.
--{{info}}
--**AT Command: AT+VER**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+VER**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
  |=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
  |(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
@@ -229,10 +229,10 @@
  OK
  )))
--{{info}}
--**Downlink Command: 0x26 (Valid in 006 stack)**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
++
++
  (((
  Downlink Format: 0x26
  )))
@@ -275,10 +275,10 @@
  Feature: Show All configure. No downlink command yet.
--{{info}}
--**AT Command: AT+CFG**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+CFG**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
@@ -302,10 +302,10 @@
  Feature: Get or Set the Application EUI.
--{{info}}
--**AT Command: AT+APPEUI**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+APPEUI**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
@@ -318,10 +318,10 @@
  Feature: Get or Set the Application Key.
--{{info}}
--**AT Command: AT+APPKEY**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+APPKEY**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
@@ -334,10 +334,10 @@
  Feature: Get or Set the Application Session Key.
--{{info}}
--**AT Command: AT+APPSKEY**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+APPSKEY**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
@@ -352,10 +352,10 @@
  Feature: Get or Set the Device Address.
--{{info}}
--**AT Command: AT+DADDR**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+DADDR**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
@@ -370,10 +370,10 @@
  Feature: Get or Set the Device EUI.
--{{info}}
--**AT Command: AT+DEUI**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+DEUI**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
@@ -388,10 +388,10 @@
  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
--{{info}}
--**AT Command: AT+NWKID**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+NWKID**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
@@ -404,10 +404,10 @@
  Feature: Get or Set the Network Session Key
--{{info}}
--**AT Command: AT+NWKSKEY**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+NWKSKEY**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
@@ -424,10 +424,10 @@
  Feature: Get or Set the confirmation mode (0-1).
--{{info}}
--**AT Command: AT+CFM**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+CFM**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
  |=(% colspan="3" style="width: 707px;" %)AT+CFM
  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
@@ -437,7 +437,7 @@
  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
--Downlink Command: 0x05
++(% style="color:blue" %)**Downlink Command: 0x05**
  Format: Command Code (0x05) followed by 2 bytes mode value.
@@ -448,10 +448,10 @@
  === AT+CFM command since DR-LWS007 software stack ===
--{{info}}
--**AT Command: AT+CFM**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+CFM**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
  |=(% colspan="3" style="width: 707px;" %)AT+CFM
  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
@@ -483,10 +483,10 @@
  OK
  )))
--{{info}}
--**Downlink Command: 0x05**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x05**
++
++
  Format: Command Code (0x05) followed by 2 bytes mode value.
  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
@@ -498,10 +498,10 @@
  Feature: Get confirmation status of the last AT+SEND (0-1).
--{{info}}
--**AT Command: AT+CFS**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+CFS**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
  |=(% colspan="3" style="width: 531px;" %)AT+CFS
  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
@@ -513,10 +513,10 @@
  Feature: Join network.
--{{info}}
--**AT Command: AT+JOIN**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+JOIN**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
@@ -530,10 +530,10 @@
  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
--{{info}}
--**AT Command: AT+NJM**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+NJM**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
  |=(% colspan="3" style="width: 750px;" %)AT+NJM
  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
@@ -543,15 +543,15 @@
  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
--{{info}}
--**Downlink Command: 0x20**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x20**
++
++
  Format: Command Code (0x20) followed by 1 bytes mode value.
  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
--* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
++* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
  == 6.5 LoRa® Network Join Status ==
@@ -558,10 +558,10 @@
  Feature: LoRa® Network Join Status.
--{{info}}
--**AT Command: AT+NJS**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+NJS**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
  |=(% colspan="3" style="width: 495px;" %)AT+NJS
  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
@@ -573,10 +573,10 @@
  Feature: Print Last Received Data in Raw Format<port:data>.
--{{info}}
--**AT Command: AT+RECV**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+RECV**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
  |=(% colspan="3" style="width: 584px;" %)AT+RECV
  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
@@ -588,10 +588,10 @@
  Feature: Print Last Received Data in Binary Format<port:data>.
--{{info}}
--**AT Command: AT+RECVB**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+RECVB**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
@@ -603,10 +603,10 @@
  Feature: Send Text Data<port:data>.
--{{info}}
--**AT Command: AT+SEND**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+SEND**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
  |=(% colspan="3" style="width: 988px;" %)AT+SEND
  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
@@ -622,10 +622,10 @@
  Feature: Send hexadecimal data along with the application port.
--{{info}}
--**AT Command: AT+SENDB**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+SENDB**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
@@ -642,10 +642,10 @@
  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
--{{info}}
--**AT Command: AT+ADR**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+ADR**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
  |=(% colspan="3" style="width: 680px;" %)AT+ADR
  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
@@ -657,11 +657,11 @@
  AT_PARAM_ERROR
  )))
--{{info}}
--**Downlink Command: 0x22**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x22**
++
++
  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
@@ -671,10 +671,10 @@
  Feature: Get or Set the Device Class(Currently only support class A, class C).
--{{info}}
--**AT Command:AT+CLASS**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+CLASS**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
@@ -689,10 +689,10 @@
  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
--{{info}}
--**AT Command:AT+DCS**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+DCS**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
  |=(% colspan="3" style="width: 512px;" %)AT+DCS
  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
@@ -707,10 +707,10 @@
  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
--{{info}}
--**AT Command: AT+DR**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+DR**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
  |=(% colspan="3" style="width: 463px;" %)AT+DR
  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
@@ -721,11 +721,11 @@
  )))
--{{info}}
--**Downlink Command: 0x2200aaFF**
--{{/info}}
++(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
++
++
  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
@@ -735,10 +735,10 @@
  Feature: Get or Set the Frame Counter Downlink.
--{{info}}
--**AT Command:AT+FCD**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+FCD**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
  |=(% colspan="3" style="width: 690px;" %)AT+FCD
  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
@@ -755,10 +755,10 @@
  Feature: Get or Set the Frame Counter Uplink.
--{{info}}
--**AT Command:AT+FCU**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+FCU**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
  |=(% colspan="3" style="width: 531px;" %)AT+FCU
  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
@@ -773,10 +773,10 @@
  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
--{{info}}
--**AT Command:AT+JN1DL**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+JN1DL**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
@@ -791,10 +791,10 @@
  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
--{{info}}
--**AT Command:AT+JN2DL**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+JN2DL**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
@@ -811,10 +811,10 @@
  Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
--{{info}}
--**AT Command:AT+PNM**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+PNM**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
  |=(% colspan="3" style="width: 664px;" %)AT+PNM
  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
@@ -836,10 +836,10 @@
  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
--{{info}}
--**AT Command:AT+RX1DL**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+RX1DL**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
@@ -854,10 +854,10 @@
  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
--{{info}}
--**AT Command:AT+RX2DL**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+RX2DL**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
@@ -872,10 +872,10 @@
  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
--{{info}}
--**AT Command:AT+RX2DR**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+RX2DR**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
@@ -890,10 +890,10 @@
  Feature: Get or Set the Rx2 window frequency
--{{info}}
--**AT Command:AT+RX2FQ**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+RX2FQ**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
@@ -908,10 +908,10 @@
  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
--{{info}}
--**AT Command:AT+TXP**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+TXP**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
  |=(% colspan="3" style="width: 462px;" %)AT+TXP
  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
@@ -933,10 +933,10 @@
  Feature: Get or Set the Rx2 window frequency
--{{info}}
--**AT Command:AT+RSSI**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+RSSI**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
@@ -948,10 +948,10 @@
  Feature: Get the SNR of the last received packet
--{{info}}
--**AT Command:AT+SNR**
--{{/info}}
++(% style="color:blue" %)**AT Command:AT+SNR**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
  |=(% colspan="3" style="width: 568px;" %)AT+SNR
  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
@@ -963,10 +963,10 @@
  Feature: Get or set the application port.
--{{info}}
--**AT Command: AT+PORT**
--{{/info}}
++(% style="color:blue" %)**AT Command: AT+PORT**
++
++
  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
  |=(% colspan="3" style="width: 497px;" %)AT+PORT
  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**

Changes for page End Device AT Commands and Downlink Command

Summary

Details

Applications

Navigation