Last modified by kai on 2024/09/06 10:00
<
From version < 46.1 >
edited by Edwin Chen
on 2022/06/10 20:37
To version < 7.8 >
edited by Xiaoling
on 2022/05/11 11:17
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,9 +1,8 @@
1 - **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
... ... @@ -11,91 +11,33 @@
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
12 12  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13 13  
14 -(((
15 15  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
16 16  
17 -)))
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
26 26  
27 27  = 3. Support End Node and firmware version =
28 28  
29 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
30 -|=(% colspan="3" style="width: 963px;" %)(((
31 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
32 -)))
33 -|(% style="width:187px" %)(((
34 -**Model**
35 -)))|(% style="width:330px" %)(((
36 -**Description**
37 -)))|(% style="width:445px" %)(((
38 -**Firmware Version <~-~-> Stack Version**
39 -)))
40 -|(% style="width:187px" %)(((
41 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
42 -)))|(% style="width:330px" %)(((
43 -Open Source Generic LoRaWAN Sensor Node
44 -)))|(% style="width:445px" %)(((
45 -(((
46 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
47 -)))
48 -
49 -(((
50 -(((
26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
51 51  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
52 52  )))
53 -)))
54 -)))
55 -|(% style="width:187px" %)(((
56 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
57 -)))|(% style="width:330px" %)(((
58 -LoRaWAN GPS Tracker
59 -)))|(% style="width:445px" %)(((
60 -(((
61 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
62 -)))
63 -
64 -(((
65 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
66 66  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
67 67  )))
68 -)))
69 -)))
70 -|(% style="width:187px" %)(((
71 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
72 -)))|(% style="width:330px" %)(((
73 -LoRaWAN BLE Indoor Tracker
74 -)))|(% style="width:445px" %)(((
75 -LBT1 v1.0 <~-~-> DR-LWS-005;
76 -)))
77 -|(% style="width:187px" %)(((
78 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
79 -)))|(% style="width:330px" %)(((
80 -LoRaWAN RS485 Modbus Converter
81 -)))|(% style="width:445px" %)(((
82 -RS485-LN v1.3 <~-~-> DR-LWS-005;
83 -)))
84 -|(% style="width:187px" %)(((
85 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
86 -)))|(% style="width:330px" %)(((
87 -LoRaWAN Temperature & Humidity Sensor
88 -)))|(% style="width:445px" %)(((
89 -(((
90 -LHT65 v1.7 <~-~-> DR-LWS-003;
91 -)))
92 -
93 -(((
94 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
95 95  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
96 96  )))
97 -)))
98 -)))
99 99  
100 100  = 4. System Management Commands =
101 101  
... ... @@ -108,7 +108,7 @@
108 108  **AT Command: AT+TDC**
109 109  )))
110 110  
111 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %)
112 112  |=(% colspan="3" style="width: 724px;" %)AT+TDC
113 113  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
114 114  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
... ... @@ -124,13 +124,9 @@
124 124  **Downlink Command: 0x01**
125 125  {{/info}}
126 126  
127 -(((
128 128  Format: Command Code (0x01) followed by 3 bytes time value.
129 -)))
130 130  
131 -(((
132 132  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
133 -)))
134 134  
135 135  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
136 136  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
... ... @@ -143,7 +143,7 @@
143 143  **AT Command: ATZ**
144 144  {{/info}}
145 145  
146 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
147 147  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
148 148  |**Command Example**|**Function**|**Response**
149 149  |ATZ|Reset MCU|(((
... ... @@ -164,16 +164,10 @@
164 164  **Downlink Command: 0x04**
165 165  {{/info}}
166 166  
167 -(((
168 168  Format: Command Code (0x04) followed by FF.
169 -)))
170 170  
171 -(((
172 172  If the downlink payload=**04FF**, the end node will reboot.
173 173  
174 -
175 -)))
176 -
177 177  == 4.3 Reset to factory Default ==
178 178  
179 179  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
... ... @@ -182,7 +182,7 @@
182 182  **AT Command: AT+FDR**
183 183  {{/info}}
184 184  
185 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
186 186  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
187 187  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
188 188  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -203,13 +203,9 @@
203 203  **Downlink Command: 0x04**
204 204  {{/info}}
205 205  
206 -(((
207 207  Format: Command Code (0x04) followed by FE.
208 -)))
209 209  
210 -(((
211 211  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
212 -)))
213 213  
214 214  
215 215  == 4.4 Show Firmware Version ==
... ... @@ -220,10 +220,10 @@
220 220  **AT Command: AT+VER**
221 221  {{/info}}
222 222  
223 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
224 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
225 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
226 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
227 227  1.3 EU868
228 228  
229 229  OK
... ... @@ -233,25 +233,17 @@
233 233  **Downlink Command: 0x26 (Valid in 006 stack)**
234 234  {{/info}}
235 235  
236 -(((
237 237  Downlink Format: 0x26
238 -)))
239 239  
240 -(((
241 241  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
242 -)))
243 243  
244 -(((
245 245  **xx: Software Type:**
246 -)))
247 247  
248 248  * 0x00 01: LGT92 Version
249 249  * 0x00 02: LBT1
250 250  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
251 251  
252 -(((
253 253  **yy: Frequency Band:**
254 -)))
255 255  
256 256  * 0x01: EU868
257 257  * 0x02: US915
... ... @@ -264,9 +264,7 @@
264 264  * 0x09: AS923-2
265 265  * 0xa0: AS923-3
266 266  
267 -(((
268 268  **zz: Subband**
269 -)))
270 270  
271 271  firmware version: v1.1.0 ~-~-> 110
272 272  
... ... @@ -279,7 +279,7 @@
279 279  **AT Command: AT+CFG**
280 280  {{/info}}
281 281  
282 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
283 283  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
284 284  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
285 285  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -306,7 +306,7 @@
306 306  **AT Command: AT+APPEUI**
307 307  {{/info}}
308 308  
309 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
310 310  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
311 311  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
312 312  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -322,7 +322,7 @@
322 322  **AT Command: AT+APPKEY**
323 323  {{/info}}
324 324  
325 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
326 326  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
327 327  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
328 328  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -338,7 +338,7 @@
338 338  **AT Command: AT+APPSKEY**
339 339  {{/info}}
340 340  
341 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
342 342  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
343 343  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
344 344  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -356,7 +356,7 @@
356 356  **AT Command: AT+DADDR**
357 357  {{/info}}
358 358  
359 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
360 360  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
361 361  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
362 362  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -374,7 +374,7 @@
374 374  **AT Command: AT+DEUI**
375 375  {{/info}}
376 376  
377 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
378 378  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
379 379  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
380 380  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -392,7 +392,7 @@
392 392  **AT Command: AT+NWKID**
393 393  {{/info}}
394 394  
395 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
396 396  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
397 397  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
398 398  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -408,7 +408,7 @@
408 408  **AT Command: AT+NWKSKEY**
409 409  {{/info}}
410 410  
411 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
412 412  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
413 413  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
414 414  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -420,8 +420,6 @@
420 420  
421 421  == 6.1 Confirm Mode ==
422 422  
423 -=== AT+CFM command before DR-LWS007 software stack ===
424 -
425 425  Feature: Get or Set the confirmation mode (0-1).
426 426  
427 427  {{info}}
... ... @@ -428,7 +428,7 @@
428 428  **AT Command: AT+CFM**
429 429  {{/info}}
430 430  
431 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
432 432  |=(% colspan="3" style="width: 707px;" %)AT+CFM
433 433  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
434 434  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -446,56 +446,6 @@
446 446  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
447 447  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
448 448  
449 -
450 -=== AT+CFM command since DR-LWS007 software stack ===
451 -
452 -{{info}}
453 -**AT Command: AT+CFM**
454 -{{/info}}
455 -
456 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
457 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
458 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
459 -|(% style="width:160px" %)(((
460 -AT+CFM=1,0,0
461 -
462 -value1
463 -)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
464 -1
465 -
466 -OK
467 -)))
468 -|(% style="width:160px" %)(((
469 -AT+CFM=0,?,0
470 -
471 -value2
472 -)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
473 -0~~7
474 -
475 -OK
476 -)))
477 -|(% style="width:160px" %)(((
478 -AT+CFM=0,0,1
479 -
480 -value3
481 -)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
482 -1
483 -
484 -OK
485 -)))
486 -
487 -{{info}}
488 -**Downlink Command: 0x05**
489 -{{/info}}
490 -
491 -Format: Command Code (0x05) followed by 2 bytes mode value.
492 -
493 -If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
494 -
495 -* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
496 -* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
497 -
498 -
499 499  == 6.2 Confirm Status ==
500 500  
501 501  Feature: Get confirmation status of the last AT+SEND (0-1).
... ... @@ -504,7 +504,7 @@
504 504  **AT Command: AT+CFS**
505 505  {{/info}}
506 506  
507 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
508 508  |=(% colspan="3" style="width: 531px;" %)AT+CFS
509 509  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
510 510  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
... ... @@ -519,7 +519,7 @@
519 519  **AT Command: AT+JOIN**
520 520  {{/info}}
521 521  
522 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
523 523  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
524 524  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
525 525  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
... ... @@ -536,7 +536,7 @@
536 536  **AT Command: AT+NJM**
537 537  {{/info}}
538 538  
539 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
540 540  |=(% colspan="3" style="width: 750px;" %)AT+NJM
541 541  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
542 542  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
... ... @@ -564,7 +564,7 @@
564 564  **AT Command: AT+NJS**
565 565  {{/info}}
566 566  
567 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
568 568  |=(% colspan="3" style="width: 495px;" %)AT+NJS
569 569  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
570 570  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
... ... @@ -579,7 +579,7 @@
579 579  **AT Command: AT+RECV**
580 580  {{/info}}
581 581  
582 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
583 583  |=(% colspan="3" style="width: 584px;" %)AT+RECV
584 584  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
585 585  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
... ... @@ -594,7 +594,7 @@
594 594  **AT Command: AT+RECVB**
595 595  {{/info}}
596 596  
597 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
598 598  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
599 599  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
600 600  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
... ... @@ -609,7 +609,7 @@
609 609  **AT Command: AT+SEND**
610 610  {{/info}}
611 611  
612 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
613 613  |=(% colspan="3" style="width: 988px;" %)AT+SEND
614 614  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
615 615  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
... ... @@ -628,7 +628,7 @@
628 628  **AT Command: AT+SENDB**
629 629  {{/info}}
630 630  
631 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
632 632  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
633 633  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
634 634  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
... ... @@ -648,7 +648,7 @@
648 648  **AT Command: AT+ADR**
649 649  {{/info}}
650 650  
651 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
652 652  |=(% colspan="3" style="width: 680px;" %)AT+ADR
653 653  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
654 654  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
... ... @@ -677,7 +677,7 @@
677 677  **AT Command:AT+CLASS**
678 678  {{/info}}
679 679  
680 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
681 681  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
682 682  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
683 683  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
... ... @@ -695,7 +695,7 @@
695 695  **AT Command:AT+DCS**
696 696  {{/info}}
697 697  
698 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
699 699  |=(% colspan="3" style="width: 512px;" %)AT+DCS
700 700  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
701 701  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
... ... @@ -713,7 +713,7 @@
713 713  **AT Command: AT+DR**
714 714  {{/info}}
715 715  
716 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
717 717  |=(% colspan="3" style="width: 463px;" %)AT+DR
718 718  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
719 719  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
... ... @@ -741,7 +741,7 @@
741 741  **AT Command:AT+FCD**
742 742  {{/info}}
743 743  
744 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
745 745  |=(% colspan="3" style="width: 690px;" %)AT+FCD
746 746  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
747 747  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
... ... @@ -761,7 +761,7 @@
761 761  **AT Command:AT+FCU**
762 762  {{/info}}
763 763  
764 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
765 765  |=(% colspan="3" style="width: 531px;" %)AT+FCU
766 766  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
767 767  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
... ... @@ -779,7 +779,7 @@
779 779  **AT Command:AT+JN1DL**
780 780  {{/info}}
781 781  
782 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
783 783  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
784 784  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
785 785  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
... ... @@ -797,7 +797,7 @@
797 797  **AT Command:AT+JN2DL**
798 798  {{/info}}
799 799  
800 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
801 801  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
802 802  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
803 803  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
... ... @@ -815,7 +815,7 @@
815 815  **AT Command:AT+PNM**
816 816  {{/info}}
817 817  
818 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
819 819  |=(% colspan="3" style="width: 664px;" %)AT+PNM
820 820  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
821 821  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
... ... @@ -835,7 +835,7 @@
835 835  **AT Command:AT+RX1DL**
836 836  {{/info}}
837 837  
838 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
839 839  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
840 840  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
841 841  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
... ... @@ -845,21 +845,18 @@
845 845  
846 846  )))
847 847  
848 -== 7.11 Receive Delay2 ==
713 +== 7.11Receive Delay2 ==
849 849  
850 850  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
851 851  
852 -{{info}}
853 -**AT Command:AT+RX2DL**
854 -{{/info}}
717 +AT Command:AT+RX2DL
855 855  
856 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
857 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
858 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
859 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
719 +|=(% colspan="3" %)AT+RX2DL
720 +|**Command Example**|**Function**|**Response**
721 +|AT+RX2DL=?|Get the delay.|2000(((
860 860  OK
861 861  )))
862 -|(% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((
724 +|AT+RX2DL=2500|Set the delay.|OK(((
863 863  
864 864  )))
865 865  
... ... @@ -867,17 +867,14 @@
867 867  
868 868  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
869 869  
870 -{{info}}
871 -**AT Command:AT+RX2DR**
872 -{{/info}}
732 +AT Command:AT+RX2DR
873 873  
874 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
875 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
876 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
877 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
734 +|=(% colspan="3" %)AT+RX2DR
735 +|**Command Example**|**Function**|**Response**
736 +|AT+RX2DR=?|Get the Rx2 window data rate.|2(((
878 878  OK
879 879  )))
880 -|(% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((
739 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK(((
881 881  
882 882  )))
883 883  
... ... @@ -885,17 +885,14 @@
885 885  
886 886  Feature: Get or Set the Rx2 window frequency
887 887  
888 -{{info}}
889 -**AT Command:AT+RX2FQ**
890 -{{/info}}
747 +AT Command:AT+RX2FQ
891 891  
892 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
893 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
894 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
895 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
749 +|=(% colspan="3" %)AT+RX2FQ
750 +|**Command Example**|**Function**|**Response**
751 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000(((
896 896  OK
897 897  )))
898 -|(% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((
754 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK(((
899 899  
900 900  )))
901 901  
... ... @@ -903,17 +903,14 @@
903 903  
904 904  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
905 905  
906 -{{info}}
907 -**AT Command:AT+TXP**
908 -{{/info}}
762 +AT Command:AT+TXP
909 909  
910 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
911 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
912 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
913 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
764 +|=(% colspan="3" %)AT+TXP
765 +|**Command Example**|**Function**|**Response**
766 +|AT+TXP=?|Get the Transmit Power.|0(((
914 914  OK
915 915  )))
916 -|(% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((
769 +|AT+TXP=1|Set the Transmit Power.|OK(((
917 917  
918 918  )))
919 919  
... ... @@ -921,21 +921,18 @@
921 921  
922 922  If the downlink payload=22000100, it means setting the TXP to 0.
923 923  
924 -* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
925 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
777 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2.
778 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0.
926 926  
927 927  == 7.15 RSSI of the Last Received Packet ==
928 928  
929 929  Feature: Get or Set the Rx2 window frequency
930 930  
931 -{{info}}
932 -**AT Command:AT+RSSI**
933 -{{/info}}
784 +AT Command:AT+RSSI
934 934  
935 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
936 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
937 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
938 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
786 +|=(% colspan="3" %)AT+RSSI
787 +|**Command Example**|**Function**|**Response**
788 +|AT+RSSI=?|Get the RSSI of the last received packet.|0(((
939 939  OK
940 940  )))
941 941  
... ... @@ -943,14 +943,11 @@
943 943  
944 944  Feature: Get the SNR of the last received packet
945 945  
946 -{{info}}
947 -**AT Command:AT+SNR**
948 -{{/info}}
796 +AT Command:AT+SNR
949 949  
950 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
951 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
952 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
953 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
798 +|=(% colspan="3" %)AT+SNR
799 +|**Command Example**|**Function**|**Response**
800 +|AT+SNR=?|Get the RSSI of the last received packet.|0(((
954 954  OK
955 955  )))
956 956  
... ... @@ -958,144 +958,114 @@
958 958  
959 959  Feature: Get or set the application port.
960 960  
961 -{{info}}
962 -**AT Command: AT+PORT**
963 -{{/info}}
808 +AT Command: AT+PORT
964 964  
965 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
966 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
967 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
968 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
810 +|=(% colspan="3" %)AT+PORT
811 +|**Command Example**|**Function**|**Response**
812 +|AT+PORT=?|Get the application port|21(((
969 969  OK
970 970  )))
971 -|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
815 +|AT+PORT=21|Set the application port|OK
972 972  
973 -{{info}}
974 -**Downlink Command: 0x23**
975 -{{/info}}
817 +Downlink Command: 0x23
976 976  
977 977  Format: Command Code (0x23) followed by 1 bytes port value.
978 978  
979 979  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
980 980  
981 -* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
982 -* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
823 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1
824 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5
983 983  
984 984  == 7.18 Single Channel Mode ==
985 985  
986 986  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
987 987  
988 -{{info}}
989 -**AT Command: AT+CHS**
990 -{{/info}}
830 +AT Command: AT+CHS
991 991  
992 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
993 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
994 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
995 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
832 +|=(% colspan="3" %)AT+CHS
833 +|**Command Example**|**Function**|**Response**
834 +|AT+CHS=?|Get Frequency for Single Channel Mode|0(((
996 996  OK
997 997  )))
998 -|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
837 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK
999 999  
1000 1000  == 7.19 Eight Channel Mode ==
1001 1001  
1002 1002  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
1003 1003  
1004 -{{info}}
1005 -**AT Command: AT+CHE**
1006 -{{/info}}
843 +AT Command: AT+CHE
1007 1007  
1008 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1009 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
1010 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1011 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
845 +|=(% colspan="3" %)AT+CHE
846 +|**Command Example**|**Function**|**Response**
847 +|AT+CHE=?|Get eight channels mode|1(((
1012 1012  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
1013 1013  
1014 1014  OK
1015 1015  )))
1016 -|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
852 +|AT+CHE=1|Set eight channels mode|OK
1017 1017  
1018 -{{info}}
1019 -**Downlink Command: 0x24**
1020 -{{/info}}
854 +Downlink Command: 0x24
1021 1021  
1022 1022  Format: Command Code (0x24) followed by 1 bytes channel value.
1023 1023  
1024 1024  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
1025 1025  
1026 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
1027 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
860 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1
861 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5
1028 1028  
1029 1029  == 7.20 Get or Set RXwindows1 timeout ==
1030 1030  
1031 1031  Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1032 1032  
1033 -{{info}}
1034 -**AT Command: AT+RX1WTO**
1035 -{{/info}}
867 +AT Command: AT+RX1WTO
1036 1036  
1037 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1038 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1039 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1040 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
869 +|=(% colspan="3" %)AT+ RX1WTO
870 +|**Command Example**|**Function**|**Response**
871 +|AT+RX1WTO=?|Get RXwindows1 timeout|14(((
1041 1041  OK
1042 1042  )))
1043 -|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
874 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK
1044 1044  
1045 -(((
1046 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1047 -)))
876 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1048 1048  
1049 -[[image:image-20220526162535-1.png]]
878 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1050 1050  
1051 -(((
1052 1052  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1053 1053  
1054 -
1055 -)))
1056 -
1057 1057  == 7.21 Get or Set RXwindows2 timeout ==
1058 1058  
1059 1059  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1060 1060  
1061 -{{info}}
1062 -**AT Command: AT+RX2WTO**
1063 -{{/info}}
886 +AT Command: AT+RX2WTO
1064 1064  
1065 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1066 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1067 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1068 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
888 +|=(% colspan="3" %)AT+ RX2WTO
889 +|**Command Example**|**Function**|**Response**
890 +|AT+RX2WTO=?|Get RXwindows2 timeout|7(((
1069 1069  OK
1070 1070  )))
1071 -|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
893 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK
1072 1072  
1073 1073  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1074 1074  
1075 1075  Feature: Get or Set uplinkdwelltime
1076 1076  
1077 -{{info}}
1078 -**AT Command: AT+DWELLT**
1079 -{{/info}}
899 +AT Command: AT+DWELLT
1080 1080  
1081 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1082 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1083 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1084 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
901 +|=(% colspan="3" %)AT+DWELLT
902 +|**Command Example**|**Function**|**Response**
903 +|AT+DWELLT=?|Get uplinkdwelltime|1(((
1085 1085  OK
1086 1086  )))
1087 -|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
906 +|AT+DWELLT=0|Set uplinkdwelltime|OK
1088 1088  
1089 -{{info}}
1090 -**Downlink Command: 0x25**
1091 -{{/info}}
908 +Downlink Command: 0x25
1092 1092  
1093 1093  Format: Command Code (0x25) followed by 1 bytes state value.
1094 1094  
1095 1095  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1096 1096  
1097 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1098 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
914 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1
915 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0
1099 1099  
1100 1100  == 7.23 Set Packet Receiving Response Level ==
1101 1101  
... ... @@ -1103,11 +1103,11 @@
1103 1103  
1104 1104  RPL value:
1105 1105  
1106 -* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1107 -* **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1108 -* **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1109 -* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1110 -* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
923 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform.
924 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
925 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
926 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
927 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1111 1111  
1112 1112  Case Analyes:
1113 1113  
... ... @@ -1115,140 +1115,37 @@
1115 1115  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1116 1116  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1117 1117  
1118 -{{info}}
1119 -**AT Command: AT+RPL**
1120 -{{/info}}
935 +AT Command: AT+RPL
1121 1121  
1122 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1123 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1124 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1125 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
937 +|=(% colspan="3" %)AT+RPL
938 +|**Command Example**|**Function**|**Response**
939 +|AT+RPL=?|Get packet receiving response level|1(((
1126 1126  OK
1127 1127  )))
1128 -|(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
942 +|AT+RPL=0|Set packet receiving response level|OK
1129 1129  
1130 -{{info}}
1131 -**Downlink Command: 0x21**
1132 -{{/info}}
944 +Downlink Command: 0x21
1133 1133  
1134 1134  Format: Command Code (0x21) followed by 1 bytes level value.
1135 1135  
1136 1136  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1137 1137  
1138 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1139 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
950 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1
951 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2
1140 1140  
1141 -
1142 -== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1143 -
1144 -{{info}}
1145 -**AT Command: AT+SETMAXNBTRANS **
1146 -{{/info}}
1147 -
1148 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1149 -|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1150 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1151 -|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1152 -OK
1153 -)))
1154 -|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1155 -1
1156 -
1157 -OK
1158 -)))
1159 -
1160 -{{info}}
1161 -**Downlink Command: 0x33**
1162 -{{/info}}
1163 -
1164 -Format: Command Code (0x33) followed by 2 bytes mode value.
1165 -
1166 -If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1167 -
1168 -* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1169 -* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1170 -
1171 -== 7.25 Device offline rejoining （LWS007) ==
1172 -
1173 -{{info}}
1174 -**AT Command: AT+DDETECT**
1175 -{{/info}}
1176 -
1177 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1178 -|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1179 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1180 -|(% style="width:160px" %)(((
1181 -AT+DDETECT=1,1440,2880
1182 -
1183 -value1
1184 -)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1185 -1
1186 -
1187 -OK
1188 -)))
1189 -|(% style="width:160px" %)(((
1190 -AT+DDETECT=1,?,2880
1191 -
1192 -value2
1193 -)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1194 -
1195 -
1196 -OK
1197 -)))
1198 -|(% style="width:160px" %)(((
1199 -AT+DDETECT=1,1440,？
1200 -
1201 -value3
1202 -)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1203 -
1204 -
1205 -OK
1206 -)))
1207 -
1208 -{{info}}
1209 -**Downlink Command: 0x33**
1210 -{{/info}}
1211 -
1212 -Format: Command Code (0x32) followed by 2 bytes mode value.
1213 -
1214 -If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1215 -
1216 -* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1217 -
1218 -== 7.26 Request the server to send an ACK ==
1219 -
1220 -{{info}}
1221 -**AT Command: AT+PNACKMD**
1222 -{{/info}}
1223 -
1224 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1225 -|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1226 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1227 -|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1228 -OK
1229 -)))
1230 -|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1231 -0
1232 -
1233 -OK
1234 -)))
1235 -
1236 1236  = 8. AT Commands Combination =
1237 1237  
1238 1238  == 8.1 Set a fix RX2DR for downlink window ==
1239 1239  
1240 -* **AT+ADR=0 **~-~-> Disable ADR first
1241 -* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
957 +* AT+ADR=0 ~-~-> Disable ADR first
958 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate
1242 1242  
1243 1243  == 8.2 Use Downlink Command to set a fix uplink DR ==
1244 1244  
1245 -{{info}}
1246 -**Downlink Command: 0x22000500**
1247 -{{/info}}
962 +Downlink Command: 0x22000500
1248 1248  
1249 1249  Same as:
1250 1250  
1251 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1252 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1253 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1254 -~)~)~)
966 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]]
967 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
968 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220511120050-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -136.3 KB
Content
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0