Last modified by kai on 2024/09/06 10:00
<
From version < 46.1 >
edited by Edwin Chen
on 2022/06/10 20:37
To version < 50.6 >
edited by Xiaoling
on 2022/07/13 12:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Edwin
1 +XWiki.Xiaoling
Content
... ... @@ -1,4 +1,4 @@
1 - **Contents：**
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
... ... @@ -6,6 +6,7 @@
6 6  
7 7  = 1. Introduction =
8 8  
9 +
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
10 10  
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
... ... @@ -18,6 +18,7 @@
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
22 +
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 23  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
... ... @@ -24,8 +24,11 @@
24 24  ** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 25  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
26 26  
29 +
30 +
27 27  = 3. Support End Node and firmware version =
28 28  
33 +
29 29  (% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
30 30  |=(% colspan="3" style="width: 963px;" %)(((
31 31  Dragino STM32 base hardware Firmware / LoRaWAN stack list
... ... @@ -97,16 +97,17 @@
97 97  )))
98 98  )))
99 99  
105 +
106 +
100 100  = 4. System Management Commands =
101 101  
109 +
102 102  == 4.1 Change Uplink Interval ==
103 103  
112 +
104 104  Feature: Change LoRaWAN End Node Transmit Interval.
105 105  
106 -(% class="box infomessage" %)
107 -(((
108 -**AT Command: AT+TDC**
109 -)))
115 +(% style="color:blue" %)**AT Command: AT+TDC**
110 110  
111 111  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
112 112  |=(% colspan="3" style="width: 724px;" %)AT+TDC
... ... @@ -120,11 +120,11 @@
120 120  Set transmit interval to 60000ms = 60 seconds
121 121  )))
122 122  
123 -{{info}}
124 -**Downlink Command: 0x01**
125 -{{/info}}
126 -
127 127  (((
130 +
131 +
132 +(% style="color:blue" %)**Downlink Command: 0x01**
133 +
128 128  Format: Command Code (0x01) followed by 3 bytes time value.
129 129  )))
130 130  
... ... @@ -135,14 +135,17 @@
135 135  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
136 136  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
137 137  
144 +
145 +
138 138  == 4.2 Reboot End Node ==
139 139  
148 +
140 140  Feature: Reboot End Node to perform a new OTAA or ABP Join.
141 141  
142 -{{info}}
143 -**AT Command: ATZ**
144 -{{/info}}
145 145  
152 +(% style="color:blue" %)**AT Command: ATZ**
153 +
154 +
146 146  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
147 147  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
148 148  |**Command Example**|**Function**|**Response**
... ... @@ -160,10 +160,10 @@
160 160  <followed by the Tx and Rx information>
161 161  )))
162 162  
163 -{{info}}
164 -**Downlink Command: 0x04**
165 -{{/info}}
166 166  
173 +(% style="color:blue" %)**Downlink Command: 0x04**
174 +
175 +
167 167  (((
168 168  Format: Command Code (0x04) followed by FF.
169 169  )))
... ... @@ -176,11 +176,10 @@
176 176  
177 177  == 4.3 Reset to factory Default ==
178 178  
188 +
179 179  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
180 180  
181 -{{info}}
182 -**AT Command: AT+FDR**
183 -{{/info}}
191 +(% style="color:blue" %)**AT Command: AT+FDR**
184 184  
185 185  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
186 186  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
... ... @@ -199,10 +199,10 @@
199 199  Please set the parameters or reset Device to apply change
200 200  )))
201 201  
202 -{{info}}
203 -**Downlink Command: 0x04**
204 -{{/info}}
205 205  
211 +(% style="color:blue" %)**Downlink Command: 0x04**
212 +
213 +
206 206  (((
207 207  Format: Command Code (0x04) followed by FE.
208 208  )))
... ... @@ -216,10 +216,10 @@
216 216  
217 217  Feature: Show firmware version. No downlink command yet.
218 218  
219 -{{info}}
220 -**AT Command: AT+VER**
221 -{{/info}}
222 222  
228 +(% style="color:blue" %)**AT Command: AT+VER**
229 +
230 +
223 223  (% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
224 224  |=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
225 225  |(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -229,10 +229,10 @@
229 229  OK
230 230  )))
231 231  
232 -{{info}}
233 -**Downlink Command: 0x26 (Valid in 006 stack)**
234 -{{/info}}
235 235  
241 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
242 +
243 +
236 236  (((
237 237  Downlink Format: 0x26
238 238  )))
... ... @@ -275,10 +275,10 @@
275 275  
276 276  Feature: Show All configure. No downlink command yet.
277 277  
278 -{{info}}
279 -**AT Command: AT+CFG**
280 -{{/info}}
281 281  
287 +(% style="color:blue" %)**AT Command: AT+CFG**
288 +
289 +
282 282  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
283 283  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
284 284  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -302,10 +302,10 @@
302 302  
303 303  Feature: Get or Set the Application EUI.
304 304  
305 -{{info}}
306 -**AT Command: AT+APPEUI**
307 -{{/info}}
308 308  
314 +(% style="color:blue" %)**AT Command: AT+APPEUI**
315 +
316 +
309 309  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
310 310  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
311 311  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -318,10 +318,10 @@
318 318  
319 319  Feature: Get or Set the Application Key.
320 320  
321 -{{info}}
322 -**AT Command: AT+APPKEY**
323 -{{/info}}
324 324  
330 +(% style="color:blue" %)**AT Command: AT+APPKEY**
331 +
332 +
325 325  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
326 326  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
327 327  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -334,10 +334,10 @@
334 334  
335 335  Feature: Get or Set the Application Session Key.
336 336  
337 -{{info}}
338 -**AT Command: AT+APPSKEY**
339 -{{/info}}
340 340  
346 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
347 +
348 +
341 341  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
342 342  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
343 343  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -352,10 +352,10 @@
352 352  
353 353  Feature: Get or Set the Device Address.
354 354  
355 -{{info}}
356 -**AT Command: AT+DADDR**
357 -{{/info}}
358 358  
364 +(% style="color:blue" %)**AT Command: AT+DADDR**
365 +
366 +
359 359  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
360 360  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
361 361  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -370,10 +370,10 @@
370 370  
371 371  Feature: Get or Set the Device EUI.
372 372  
373 -{{info}}
374 -**AT Command: AT+DEUI**
375 -{{/info}}
376 376  
382 +(% style="color:blue" %)**AT Command: AT+DEUI**
383 +
384 +
377 377  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
378 378  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
379 379  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -388,10 +388,10 @@
388 388  
389 389  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
390 390  
391 -{{info}}
392 -**AT Command: AT+NWKID**
393 -{{/info}}
394 394  
400 +(% style="color:blue" %)**AT Command: AT+NWKID**
401 +
402 +
395 395  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
396 396  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
397 397  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -404,10 +404,10 @@
404 404  
405 405  Feature: Get or Set the Network Session Key
406 406  
407 -{{info}}
408 -**AT Command: AT+NWKSKEY**
409 -{{/info}}
410 410  
416 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
417 +
418 +
411 411  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
412 412  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
413 413  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -424,10 +424,10 @@
424 424  
425 425  Feature: Get or Set the confirmation mode (0-1).
426 426  
427 -{{info}}
428 -**AT Command: AT+CFM**
429 -{{/info}}
430 430  
436 +(% style="color:blue" %)**AT Command: AT+CFM**
437 +
438 +
431 431  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
432 432  |=(% colspan="3" style="width: 707px;" %)AT+CFM
433 433  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -437,7 +437,7 @@
437 437  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
438 438  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
439 439  
440 -Downlink Command: 0x05
448 +(% style="color:blue" %)**Downlink Command: 0x05**
441 441  
442 442  Format: Command Code (0x05) followed by 2 bytes mode value.
443 443  
... ... @@ -446,13 +446,12 @@
446 446  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
447 447  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
448 448  
449 -
450 450  === AT+CFM command since DR-LWS007 software stack ===
451 451  
452 -{{info}}
453 -**AT Command: AT+CFM**
454 -{{/info}}
455 455  
460 +(% style="color:blue" %)**AT Command: AT+CFM**
461 +
462 +
456 456  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
457 457  |=(% colspan="3" style="width: 707px;" %)AT+CFM
458 458  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
... ... @@ -484,10 +484,10 @@
484 484  OK
485 485  )))
486 486  
487 -{{info}}
488 -**Downlink Command: 0x05**
489 -{{/info}}
490 490  
495 +(% style="color:blue" %)**Downlink Command: 0x05**
496 +
497 +
491 491  Format: Command Code (0x05) followed by 2 bytes mode value.
492 492  
493 493  If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
... ... @@ -495,15 +495,14 @@
495 495  * Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
496 496  * Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
497 497  
498 -
499 499  == 6.2 Confirm Status ==
500 500  
501 501  Feature: Get confirmation status of the last AT+SEND (0-1).
502 502  
503 -{{info}}
504 -**AT Command: AT+CFS**
505 -{{/info}}
506 506  
510 +(% style="color:blue" %)**AT Command: AT+CFS**
511 +
512 +
507 507  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
508 508  |=(% colspan="3" style="width: 531px;" %)AT+CFS
509 509  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -515,10 +515,10 @@
515 515  
516 516  Feature: Join network.
517 517  
518 -{{info}}
519 -**AT Command: AT+JOIN**
520 -{{/info}}
521 521  
525 +(% style="color:blue" %)**AT Command: AT+JOIN**
526 +
527 +
522 522  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
523 523  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
524 524  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -532,10 +532,10 @@
532 532  
533 533  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
534 534  
535 -{{info}}
536 -**AT Command: AT+NJM**
537 -{{/info}}
538 538  
542 +(% style="color:blue" %)**AT Command: AT+NJM**
543 +
544 +
539 539  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
540 540  |=(% colspan="3" style="width: 750px;" %)AT+NJM
541 541  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -545,15 +545,15 @@
545 545  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
546 546  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
547 547  
548 -{{info}}
549 -**Downlink Command: 0x20**
550 -{{/info}}
551 551  
555 +(% style="color:blue" %)**Downlink Command: 0x20**
556 +
557 +
552 552  Format: Command Code (0x20) followed by 1 bytes mode value.
553 553  
554 554  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
555 555  
556 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
562 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
557 557  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
558 558  
559 559  == 6.5 LoRa® Network Join Status ==
... ... @@ -560,10 +560,10 @@
560 560  
561 561  Feature: LoRa® Network Join Status.
562 562  
563 -{{info}}
564 -**AT Command: AT+NJS**
565 -{{/info}}
566 566  
570 +(% style="color:blue" %)**AT Command: AT+NJS**
571 +
572 +
567 567  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
568 568  |=(% colspan="3" style="width: 495px;" %)AT+NJS
569 569  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -575,10 +575,10 @@
575 575  
576 576  Feature: Print Last Received Data in Raw Format<port:data>.
577 577  
578 -{{info}}
579 -**AT Command: AT+RECV**
580 -{{/info}}
581 581  
585 +(% style="color:blue" %)**AT Command: AT+RECV**
586 +
587 +
582 582  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
583 583  |=(% colspan="3" style="width: 584px;" %)AT+RECV
584 584  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -590,10 +590,10 @@
590 590  
591 591  Feature: Print Last Received Data in Binary Format<port:data>.
592 592  
593 -{{info}}
594 -**AT Command: AT+RECVB**
595 -{{/info}}
596 596  
600 +(% style="color:blue" %)**AT Command: AT+RECVB**
601 +
602 +
597 597  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
598 598  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
599 599  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -605,10 +605,10 @@
605 605  
606 606  Feature: Send Text Data<port:data>.
607 607  
608 -{{info}}
609 -**AT Command: AT+SEND**
610 -{{/info}}
611 611  
615 +(% style="color:blue" %)**AT Command: AT+SEND**
616 +
617 +
612 612  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
613 613  |=(% colspan="3" style="width: 988px;" %)AT+SEND
614 614  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -624,10 +624,10 @@
624 624  
625 625  Feature: Send hexadecimal data along with the application port.
626 626  
627 -{{info}}
628 -**AT Command: AT+SENDB**
629 -{{/info}}
630 630  
634 +(% style="color:blue" %)**AT Command: AT+SENDB**
635 +
636 +
631 631  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
632 632  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
633 633  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -644,10 +644,10 @@
644 644  
645 645  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
646 646  
647 -{{info}}
648 -**AT Command: AT+ADR**
649 -{{/info}}
650 650  
654 +(% style="color:blue" %)**AT Command: AT+ADR**
655 +
656 +
651 651  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
652 652  |=(% colspan="3" style="width: 680px;" %)AT+ADR
653 653  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -659,11 +659,11 @@
659 659  AT_PARAM_ERROR
660 660  )))
661 661  
662 -{{info}}
663 -**Downlink Command: 0x22**
664 -{{/info}}
665 665  
669 +(% style="color:blue" %)**Downlink Command: 0x22**
666 666  
671 +
672 +
667 667  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
668 668  
669 669  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
... ... @@ -673,10 +673,10 @@
673 673  
674 674  Feature: Get or Set the Device Class(Currently only support class A, class C).
675 675  
676 -{{info}}
677 -**AT Command:AT+CLASS**
678 -{{/info}}
679 679  
683 +(% style="color:blue" %)**AT Command:AT+CLASS**
684 +
685 +
680 680  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
681 681  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
682 682  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -691,10 +691,10 @@
691 691  
692 692  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
693 693  
694 -{{info}}
695 -**AT Command:AT+DCS**
696 -{{/info}}
697 697  
701 +(% style="color:blue" %)**AT Command:AT+DCS**
702 +
703 +
698 698  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
699 699  |=(% colspan="3" style="width: 512px;" %)AT+DCS
700 700  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -709,10 +709,10 @@
709 709  
710 710  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
711 711  
712 -{{info}}
713 -**AT Command: AT+DR**
714 -{{/info}}
715 715  
719 +(% style="color:blue" %)**AT Command: AT+DR**
720 +
721 +
716 716  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
717 717  |=(% colspan="3" style="width: 463px;" %)AT+DR
718 718  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -723,11 +723,11 @@
723 723  
724 724  )))
725 725  
726 -{{info}}
727 -**Downlink Command: 0x2200aaFF**
728 -{{/info}}
729 729  
733 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
730 730  
735 +
736 +
731 731  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
732 732  
733 733  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
... ... @@ -737,10 +737,10 @@
737 737  
738 738  Feature: Get or Set the Frame Counter Downlink.
739 739  
740 -{{info}}
741 -**AT Command:AT+FCD**
742 -{{/info}}
743 743  
747 +(% style="color:blue" %)**AT Command:AT+FCD**
748 +
749 +
744 744  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
745 745  |=(% colspan="3" style="width: 690px;" %)AT+FCD
746 746  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -757,10 +757,10 @@
757 757  
758 758  Feature: Get or Set the Frame Counter Uplink.
759 759  
760 -{{info}}
761 -**AT Command:AT+FCU**
762 -{{/info}}
763 763  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
769 +
764 764  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
765 765  |=(% colspan="3" style="width: 531px;" %)AT+FCU
766 766  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -775,10 +775,10 @@
775 775  
776 776  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
777 777  
778 -{{info}}
779 -**AT Command:AT+JN1DL**
780 -{{/info}}
781 781  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
787 +
782 782  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
783 783  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
784 784  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -793,10 +793,10 @@
793 793  
794 794  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
795 795  
796 -{{info}}
797 -**AT Command:AT+JN2DL**
798 -{{/info}}
799 799  
803 +(% style="color:blue" %)**AT Command:AT+JN2DL**
804 +
805 +
800 800  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
801 801  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
802 802  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -809,12 +809,14 @@
809 809  
810 810  == 7.9 Public Network Mode ==
811 811  
812 -Feature: Get or Set the public network mode. (0: off, 1: on)
818 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
813 813  
814 -{{info}}
815 -**AT Command:AT+PNM**
816 -{{/info}}
820 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
817 817  
822 +
823 +(% style="color:blue" %)**AT Command:AT+PNM**
824 +
825 +
818 818  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
819 819  |=(% colspan="3" style="width: 664px;" %)AT+PNM
820 820  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -821,20 +821,25 @@
821 821  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
822 822  OK
823 823  )))
824 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
832 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
833 +Set the public network mode.
834 +
835 +Set syncword=0x34
836 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
825 825  OK
826 826  
827 827  
828 828  )))
841 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
829 829  
830 830  == 7.10 Receive Delay1 ==
831 831  
832 832  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
833 833  
834 -{{info}}
835 -**AT Command:AT+RX1DL**
836 -{{/info}}
837 837  
848 +(% style="color:blue" %)**AT Command:AT+RX1DL**
849 +
850 +
838 838  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
839 839  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
840 840  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -849,10 +849,10 @@
849 849  
850 850  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
851 851  
852 -{{info}}
853 -**AT Command:AT+RX2DL**
854 -{{/info}}
855 855  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
868 +
856 856  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
857 857  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
858 858  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -867,10 +867,10 @@
867 867  
868 868  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
869 869  
870 -{{info}}
871 -**AT Command:AT+RX2DR**
872 -{{/info}}
873 873  
884 +(% style="color:blue" %)**AT Command:AT+RX2DR**
885 +
886 +
874 874  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
875 875  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
876 876  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -885,10 +885,10 @@
885 885  
886 886  Feature: Get or Set the Rx2 window frequency
887 887  
888 -{{info}}
889 -**AT Command:AT+RX2FQ**
890 -{{/info}}
891 891  
902 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
903 +
904 +
892 892  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
893 893  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
894 894  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -903,10 +903,10 @@
903 903  
904 904  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
905 905  
906 -{{info}}
907 -**AT Command:AT+TXP**
908 -{{/info}}
909 909  
920 +(% style="color:blue" %)**AT Command:AT+TXP**
921 +
922 +
910 910  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
911 911  |=(% colspan="3" style="width: 462px;" %)AT+TXP
912 912  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -928,10 +928,10 @@
928 928  
929 929  Feature: Get or Set the Rx2 window frequency
930 930  
931 -{{info}}
932 -**AT Command:AT+RSSI**
933 -{{/info}}
934 934  
945 +(% style="color:blue" %)**AT Command:AT+RSSI**
946 +
947 +
935 935  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
936 936  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
937 937  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -943,10 +943,10 @@
943 943  
944 944  Feature: Get the SNR of the last received packet
945 945  
946 -{{info}}
947 -**AT Command:AT+SNR**
948 -{{/info}}
949 949  
960 +(% style="color:blue" %)**AT Command:AT+SNR**
961 +
962 +
950 950  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
951 951  |=(% colspan="3" style="width: 568px;" %)AT+SNR
952 952  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -958,10 +958,10 @@
958 958  
959 959  Feature: Get or set the application port.
960 960  
961 -{{info}}
962 -**AT Command: AT+PORT**
963 -{{/info}}
964 964  
975 +(% style="color:blue" %)**AT Command: AT+PORT**
976 +
977 +
965 965  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
966 966  |=(% colspan="3" style="width: 497px;" %)AT+PORT
967 967  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
... ... @@ -1138,7 +1138,6 @@
1138 1138  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1139 1139  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1140 1140  
1141 -
1142 1142  == 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1143 1143  
1144 1144  {{info}}
... ... @@ -1233,6 +1233,35 @@
1233 1233  OK
1234 1234  )))
1235 1235  
1248 +== 7.27 Adjust network rejoining interval ==
1249 +
1250 +{{info}}
1251 +**AT Command: AT+RJTDC**
1252 +{{/info}}
1253 +
1254 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1255 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1256 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1257 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1258 +OK
1259 +
1260 +the interval is 30000ms = 30s
1261 +)))
1262 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1264 +)))
1265 +
1266 +{{info}}
1267 +**Downlink Command: 0x26**
1268 +{{/info}}
1269 +
1270 +Format: Command Code (0x26) followed by 2 bytes mode value.
1271 +
1272 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1273 +
1274 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1276 +
1236 1236  = 8. AT Commands Combination =
1237 1237  
1238 1238  == 8.1 Set a fix RX2DR for downlink window ==

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0