Last modified by kai on 2024/09/06 10:00
<
From version < 44.1 >
edited by Bei Jinggeng
on 2022/06/10 15:06
To version < 50.6 >
edited by Xiaoling
on 2022/07/13 12:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Author
... ... @@ -1,1 +1,1 @@
1 -XWiki.Bei
1 +XWiki.Xiaoling
Content
... ... @@ -1,4 +1,4 @@
1 - **Contents：**
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
... ... @@ -6,6 +6,7 @@
6 6  
7 7  = 1. Introduction =
8 8  
9 +
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
10 10  
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
... ... @@ -18,6 +18,7 @@
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
22 +
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 23  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
... ... @@ -24,8 +24,11 @@
24 24  ** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 25  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
26 26  
29 +
30 +
27 27  = 3. Support End Node and firmware version =
28 28  
33 +
29 29  (% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
30 30  |=(% colspan="3" style="width: 963px;" %)(((
31 31  Dragino STM32 base hardware Firmware / LoRaWAN stack list
... ... @@ -97,16 +97,17 @@
97 97  )))
98 98  )))
99 99  
105 +
106 +
100 100  = 4. System Management Commands =
101 101  
109 +
102 102  == 4.1 Change Uplink Interval ==
103 103  
112 +
104 104  Feature: Change LoRaWAN End Node Transmit Interval.
105 105  
106 -(% class="box infomessage" %)
107 -(((
108 -**AT Command: AT+TDC**
109 -)))
115 +(% style="color:blue" %)**AT Command: AT+TDC**
110 110  
111 111  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
112 112  |=(% colspan="3" style="width: 724px;" %)AT+TDC
... ... @@ -120,11 +120,11 @@
120 120  Set transmit interval to 60000ms = 60 seconds
121 121  )))
122 122  
123 -{{info}}
124 -**Downlink Command: 0x01**
125 -{{/info}}
126 -
127 127  (((
130 +
131 +
132 +(% style="color:blue" %)**Downlink Command: 0x01**
133 +
128 128  Format: Command Code (0x01) followed by 3 bytes time value.
129 129  )))
130 130  
... ... @@ -135,14 +135,17 @@
135 135  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
136 136  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
137 137  
144 +
145 +
138 138  == 4.2 Reboot End Node ==
139 139  
148 +
140 140  Feature: Reboot End Node to perform a new OTAA or ABP Join.
141 141  
142 -{{info}}
143 -**AT Command: ATZ**
144 -{{/info}}
145 145  
152 +(% style="color:blue" %)**AT Command: ATZ**
153 +
154 +
146 146  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
147 147  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
148 148  |**Command Example**|**Function**|**Response**
... ... @@ -160,10 +160,10 @@
160 160  <followed by the Tx and Rx information>
161 161  )))
162 162  
163 -{{info}}
164 -**Downlink Command: 0x04**
165 -{{/info}}
166 166  
173 +(% style="color:blue" %)**Downlink Command: 0x04**
174 +
175 +
167 167  (((
168 168  Format: Command Code (0x04) followed by FF.
169 169  )))
... ... @@ -176,11 +176,10 @@
176 176  
177 177  == 4.3 Reset to factory Default ==
178 178  
188 +
179 179  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
180 180  
181 -{{info}}
182 -**AT Command: AT+FDR**
183 -{{/info}}
191 +(% style="color:blue" %)**AT Command: AT+FDR**
184 184  
185 185  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
186 186  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
... ... @@ -199,10 +199,10 @@
199 199  Please set the parameters or reset Device to apply change
200 200  )))
201 201  
202 -{{info}}
203 -**Downlink Command: 0x04**
204 -{{/info}}
205 205  
211 +(% style="color:blue" %)**Downlink Command: 0x04**
212 +
213 +
206 206  (((
207 207  Format: Command Code (0x04) followed by FE.
208 208  )))
... ... @@ -216,10 +216,10 @@
216 216  
217 217  Feature: Show firmware version. No downlink command yet.
218 218  
219 -{{info}}
220 -**AT Command: AT+VER**
221 -{{/info}}
222 222  
228 +(% style="color:blue" %)**AT Command: AT+VER**
229 +
230 +
223 223  (% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
224 224  |=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
225 225  |(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -229,10 +229,10 @@
229 229  OK
230 230  )))
231 231  
232 -{{info}}
233 -**Downlink Command: 0x26 (Valid in 006 stack)**
234 -{{/info}}
235 235  
241 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
242 +
243 +
236 236  (((
237 237  Downlink Format: 0x26
238 238  )))
... ... @@ -275,10 +275,10 @@
275 275  
276 276  Feature: Show All configure. No downlink command yet.
277 277  
278 -{{info}}
279 -**AT Command: AT+CFG**
280 -{{/info}}
281 281  
287 +(% style="color:blue" %)**AT Command: AT+CFG**
288 +
289 +
282 282  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
283 283  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
284 284  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -302,10 +302,10 @@
302 302  
303 303  Feature: Get or Set the Application EUI.
304 304  
305 -{{info}}
306 -**AT Command: AT+APPEUI**
307 -{{/info}}
308 308  
314 +(% style="color:blue" %)**AT Command: AT+APPEUI**
315 +
316 +
309 309  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
310 310  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
311 311  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -318,10 +318,10 @@
318 318  
319 319  Feature: Get or Set the Application Key.
320 320  
321 -{{info}}
322 -**AT Command: AT+APPKEY**
323 -{{/info}}
324 324  
330 +(% style="color:blue" %)**AT Command: AT+APPKEY**
331 +
332 +
325 325  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
326 326  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
327 327  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -334,10 +334,10 @@
334 334  
335 335  Feature: Get or Set the Application Session Key.
336 336  
337 -{{info}}
338 -**AT Command: AT+APPSKEY**
339 -{{/info}}
340 340  
346 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
347 +
348 +
341 341  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
342 342  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
343 343  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -352,10 +352,10 @@
352 352  
353 353  Feature: Get or Set the Device Address.
354 354  
355 -{{info}}
356 -**AT Command: AT+DADDR**
357 -{{/info}}
358 358  
364 +(% style="color:blue" %)**AT Command: AT+DADDR**
365 +
366 +
359 359  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
360 360  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
361 361  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -370,10 +370,10 @@
370 370  
371 371  Feature: Get or Set the Device EUI.
372 372  
373 -{{info}}
374 -**AT Command: AT+DEUI**
375 -{{/info}}
376 376  
382 +(% style="color:blue" %)**AT Command: AT+DEUI**
383 +
384 +
377 377  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
378 378  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
379 379  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -388,10 +388,10 @@
388 388  
389 389  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
390 390  
391 -{{info}}
392 -**AT Command: AT+NWKID**
393 -{{/info}}
394 394  
400 +(% style="color:blue" %)**AT Command: AT+NWKID**
401 +
402 +
395 395  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
396 396  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
397 397  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -404,10 +404,10 @@
404 404  
405 405  Feature: Get or Set the Network Session Key
406 406  
407 -{{info}}
408 -**AT Command: AT+NWKSKEY**
409 -{{/info}}
410 410  
416 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
417 +
418 +
411 411  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
412 412  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
413 413  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -420,12 +420,14 @@
420 420  
421 421  == 6.1 Confirm Mode ==
422 422  
431 +=== AT+CFM command before DR-LWS007 software stack ===
432 +
423 423  Feature: Get or Set the confirmation mode (0-1).
424 424  
425 -{{info}}
426 -**AT Command: AT+CFM**
427 -{{/info}}
428 428  
436 +(% style="color:blue" %)**AT Command: AT+CFM**
437 +
438 +
429 429  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
430 430  |=(% colspan="3" style="width: 707px;" %)AT+CFM
431 431  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -435,7 +435,7 @@
435 435  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
436 436  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
437 437  
438 -Downlink Command: 0x05
448 +(% style="color:blue" %)**Downlink Command: 0x05**
439 439  
440 440  Format: Command Code (0x05) followed by 2 bytes mode value.
441 441  
... ... @@ -444,14 +444,62 @@
444 444  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
445 445  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
446 446  
457 +=== AT+CFM command since DR-LWS007 software stack ===
458 +
459 +
460 +(% style="color:blue" %)**AT Command: AT+CFM**
461 +
462 +
463 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
466 +|(% style="width:160px" %)(((
467 +AT+CFM=1,0,0
468 +
469 +value1
470 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
471 +1
472 +
473 +OK
474 +)))
475 +|(% style="width:160px" %)(((
476 +AT+CFM=0,?,0
477 +
478 +value2
479 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
480 +0~~7
481 +
482 +OK
483 +)))
484 +|(% style="width:160px" %)(((
485 +AT+CFM=0,0,1
486 +
487 +value3
488 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
489 +1
490 +
491 +OK
492 +)))
493 +
494 +
495 +(% style="color:blue" %)**Downlink Command: 0x05**
496 +
497 +
498 +Format: Command Code (0x05) followed by 2 bytes mode value.
499 +
500 +If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
501 +
502 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
503 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
504 +
447 447  == 6.2 Confirm Status ==
448 448  
449 449  Feature: Get confirmation status of the last AT+SEND (0-1).
450 450  
451 -{{info}}
452 -**AT Command: AT+CFS**
453 -{{/info}}
454 454  
510 +(% style="color:blue" %)**AT Command: AT+CFS**
511 +
512 +
455 455  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
456 456  |=(% colspan="3" style="width: 531px;" %)AT+CFS
457 457  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -463,10 +463,10 @@
463 463  
464 464  Feature: Join network.
465 465  
466 -{{info}}
467 -**AT Command: AT+JOIN**
468 -{{/info}}
469 469  
525 +(% style="color:blue" %)**AT Command: AT+JOIN**
526 +
527 +
470 470  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
471 471  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
472 472  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -480,10 +480,10 @@
480 480  
481 481  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
482 482  
483 -{{info}}
484 -**AT Command: AT+NJM**
485 -{{/info}}
486 486  
542 +(% style="color:blue" %)**AT Command: AT+NJM**
543 +
544 +
487 487  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
488 488  |=(% colspan="3" style="width: 750px;" %)AT+NJM
489 489  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -493,15 +493,15 @@
493 493  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
494 494  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
495 495  
496 -{{info}}
497 -**Downlink Command: 0x20**
498 -{{/info}}
499 499  
555 +(% style="color:blue" %)**Downlink Command: 0x20**
556 +
557 +
500 500  Format: Command Code (0x20) followed by 1 bytes mode value.
501 501  
502 502  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
503 503  
504 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
562 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
505 505  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
506 506  
507 507  == 6.5 LoRa® Network Join Status ==
... ... @@ -508,10 +508,10 @@
508 508  
509 509  Feature: LoRa® Network Join Status.
510 510  
511 -{{info}}
512 -**AT Command: AT+NJS**
513 -{{/info}}
514 514  
570 +(% style="color:blue" %)**AT Command: AT+NJS**
571 +
572 +
515 515  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
516 516  |=(% colspan="3" style="width: 495px;" %)AT+NJS
517 517  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -523,10 +523,10 @@
523 523  
524 524  Feature: Print Last Received Data in Raw Format<port:data>.
525 525  
526 -{{info}}
527 -**AT Command: AT+RECV**
528 -{{/info}}
529 529  
585 +(% style="color:blue" %)**AT Command: AT+RECV**
586 +
587 +
530 530  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
531 531  |=(% colspan="3" style="width: 584px;" %)AT+RECV
532 532  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -538,10 +538,10 @@
538 538  
539 539  Feature: Print Last Received Data in Binary Format<port:data>.
540 540  
541 -{{info}}
542 -**AT Command: AT+RECVB**
543 -{{/info}}
544 544  
600 +(% style="color:blue" %)**AT Command: AT+RECVB**
601 +
602 +
545 545  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
546 546  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
547 547  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -553,10 +553,10 @@
553 553  
554 554  Feature: Send Text Data<port:data>.
555 555  
556 -{{info}}
557 -**AT Command: AT+SEND**
558 -{{/info}}
559 559  
615 +(% style="color:blue" %)**AT Command: AT+SEND**
616 +
617 +
560 560  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
561 561  |=(% colspan="3" style="width: 988px;" %)AT+SEND
562 562  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -572,10 +572,10 @@
572 572  
573 573  Feature: Send hexadecimal data along with the application port.
574 574  
575 -{{info}}
576 -**AT Command: AT+SENDB**
577 -{{/info}}
578 578  
634 +(% style="color:blue" %)**AT Command: AT+SENDB**
635 +
636 +
579 579  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
580 580  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
581 581  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -592,10 +592,10 @@
592 592  
593 593  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
594 594  
595 -{{info}}
596 -**AT Command: AT+ADR**
597 -{{/info}}
598 598  
654 +(% style="color:blue" %)**AT Command: AT+ADR**
655 +
656 +
599 599  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
600 600  |=(% colspan="3" style="width: 680px;" %)AT+ADR
601 601  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -607,11 +607,11 @@
607 607  AT_PARAM_ERROR
608 608  )))
609 609  
610 -{{info}}
611 -**Downlink Command: 0x22**
612 -{{/info}}
613 613  
669 +(% style="color:blue" %)**Downlink Command: 0x22**
614 614  
671 +
672 +
615 615  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
616 616  
617 617  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
... ... @@ -621,10 +621,10 @@
621 621  
622 622  Feature: Get or Set the Device Class(Currently only support class A, class C).
623 623  
624 -{{info}}
625 -**AT Command:AT+CLASS**
626 -{{/info}}
627 627  
683 +(% style="color:blue" %)**AT Command:AT+CLASS**
684 +
685 +
628 628  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
629 629  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
630 630  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -639,10 +639,10 @@
639 639  
640 640  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
641 641  
642 -{{info}}
643 -**AT Command:AT+DCS**
644 -{{/info}}
645 645  
701 +(% style="color:blue" %)**AT Command:AT+DCS**
702 +
703 +
646 646  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
647 647  |=(% colspan="3" style="width: 512px;" %)AT+DCS
648 648  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -657,10 +657,10 @@
657 657  
658 658  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
659 659  
660 -{{info}}
661 -**AT Command: AT+DR**
662 -{{/info}}
663 663  
719 +(% style="color:blue" %)**AT Command: AT+DR**
720 +
721 +
664 664  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
665 665  |=(% colspan="3" style="width: 463px;" %)AT+DR
666 666  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -671,11 +671,11 @@
671 671  
672 672  )))
673 673  
674 -{{info}}
675 -**Downlink Command: 0x2200aaFF**
676 -{{/info}}
677 677  
733 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
678 678  
735 +
736 +
679 679  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
680 680  
681 681  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
... ... @@ -685,10 +685,10 @@
685 685  
686 686  Feature: Get or Set the Frame Counter Downlink.
687 687  
688 -{{info}}
689 -**AT Command:AT+FCD**
690 -{{/info}}
691 691  
747 +(% style="color:blue" %)**AT Command:AT+FCD**
748 +
749 +
692 692  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
693 693  |=(% colspan="3" style="width: 690px;" %)AT+FCD
694 694  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -705,10 +705,10 @@
705 705  
706 706  Feature: Get or Set the Frame Counter Uplink.
707 707  
708 -{{info}}
709 -**AT Command:AT+FCU**
710 -{{/info}}
711 711  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
769 +
712 712  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
713 713  |=(% colspan="3" style="width: 531px;" %)AT+FCU
714 714  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -723,10 +723,10 @@
723 723  
724 724  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
725 725  
726 -{{info}}
727 -**AT Command:AT+JN1DL**
728 -{{/info}}
729 729  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
787 +
730 730  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
731 731  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
732 732  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -741,10 +741,10 @@
741 741  
742 742  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
743 743  
744 -{{info}}
745 -**AT Command:AT+JN2DL**
746 -{{/info}}
747 747  
803 +(% style="color:blue" %)**AT Command:AT+JN2DL**
804 +
805 +
748 748  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
749 749  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
750 750  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -757,12 +757,14 @@
757 757  
758 758  == 7.9 Public Network Mode ==
759 759  
760 -Feature: Get or Set the public network mode. (0: off, 1: on)
818 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
761 761  
762 -{{info}}
763 -**AT Command:AT+PNM**
764 -{{/info}}
820 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
765 765  
822 +
823 +(% style="color:blue" %)**AT Command:AT+PNM**
824 +
825 +
766 766  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
767 767  |=(% colspan="3" style="width: 664px;" %)AT+PNM
768 768  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -769,20 +769,25 @@
769 769  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
770 770  OK
771 771  )))
772 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
832 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
833 +Set the public network mode.
834 +
835 +Set syncword=0x34
836 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
773 773  OK
774 774  
775 775  
776 776  )))
841 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
777 777  
778 778  == 7.10 Receive Delay1 ==
779 779  
780 780  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
781 781  
782 -{{info}}
783 -**AT Command:AT+RX1DL**
784 -{{/info}}
785 785  
848 +(% style="color:blue" %)**AT Command:AT+RX1DL**
849 +
850 +
786 786  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
787 787  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
788 788  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -797,10 +797,10 @@
797 797  
798 798  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
799 799  
800 -{{info}}
801 -**AT Command:AT+RX2DL**
802 -{{/info}}
803 803  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
868 +
804 804  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
805 805  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
806 806  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -815,10 +815,10 @@
815 815  
816 816  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
817 817  
818 -{{info}}
819 -**AT Command:AT+RX2DR**
820 -{{/info}}
821 821  
884 +(% style="color:blue" %)**AT Command:AT+RX2DR**
885 +
886 +
822 822  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
823 823  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
824 824  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -833,10 +833,10 @@
833 833  
834 834  Feature: Get or Set the Rx2 window frequency
835 835  
836 -{{info}}
837 -**AT Command:AT+RX2FQ**
838 -{{/info}}
839 839  
902 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
903 +
904 +
840 840  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
841 841  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
842 842  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -851,10 +851,10 @@
851 851  
852 852  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
853 853  
854 -{{info}}
855 -**AT Command:AT+TXP**
856 -{{/info}}
857 857  
920 +(% style="color:blue" %)**AT Command:AT+TXP**
921 +
922 +
858 858  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
859 859  |=(% colspan="3" style="width: 462px;" %)AT+TXP
860 860  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -876,10 +876,10 @@
876 876  
877 877  Feature: Get or Set the Rx2 window frequency
878 878  
879 -{{info}}
880 -**AT Command:AT+RSSI**
881 -{{/info}}
882 882  
945 +(% style="color:blue" %)**AT Command:AT+RSSI**
946 +
947 +
883 883  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
884 884  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
885 885  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -891,10 +891,10 @@
891 891  
892 892  Feature: Get the SNR of the last received packet
893 893  
894 -{{info}}
895 -**AT Command:AT+SNR**
896 -{{/info}}
897 897  
960 +(% style="color:blue" %)**AT Command:AT+SNR**
961 +
962 +
898 898  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
899 899  |=(% colspan="3" style="width: 568px;" %)AT+SNR
900 900  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -906,10 +906,10 @@
906 906  
907 907  Feature: Get or set the application port.
908 908  
909 -{{info}}
910 -**AT Command: AT+PORT**
911 -{{/info}}
912 912  
975 +(% style="color:blue" %)**AT Command: AT+PORT**
976 +
977 +
913 913  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
914 914  |=(% colspan="3" style="width: 497px;" %)AT+PORT
915 915  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
... ... @@ -1086,57 +1086,9 @@
1086 1086  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1087 1087  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1088 1088  
1089 -== 7.24 Uplink fcnt settings（LWS007) ==
1154 +== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1090 1090  
1091 1091  {{info}}
1092 -**AT Command: AT+CFM**
1093 -{{/info}}
1094 -
1095 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1096 -|=(% colspan="3" style="width: 707px;" %)AT+CFM
1097 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1098 -|(% style="width:160px" %)(((
1099 -AT+CFM=1,0,0
1100 -
1101 -value1
1102 -)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
1103 -1
1104 -
1105 -OK
1106 -)))
1107 -|(% style="width:160px" %)(((
1108 -AT+CFM=0,?,0
1109 -
1110 -value2
1111 -)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
1112 -0~~7
1113 -
1114 -OK
1115 -)))
1116 -|(% style="width:160px" %)(((
1117 -AT+CFM=0,0,1
1118 -
1119 -value3
1120 -)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
1121 -1
1122 -
1123 -OK
1124 -)))
1125 -
1126 -{{info}}
1127 -**Downlink Command: 0x05**
1128 -{{/info}}
1129 -
1130 -Format: Command Code (0x05) followed by 2 bytes mode value.
1131 -
1132 -If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
1133 -
1134 -* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
1135 -* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
1136 -
1137 -== 7.25 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1138 -
1139 -{{info}}
1140 1140  **AT Command: AT+SETMAXNBTRANS **
1141 1141  {{/info}}
1142 1142  
... ... @@ -1163,7 +1163,7 @@
1163 1163  * Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1164 1164  * Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1165 1165  
1166 -== 7.26 Device offline rejoining ==
1183 +== 7.25 Device offline rejoining （LWS007) ==
1167 1167  
1168 1168  {{info}}
1169 1169  **AT Command: AT+DDETECT**
... ... @@ -1210,8 +1210,7 @@
1210 1210  
1211 1211  * Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1212 1212  
1213 -(% class="wikigeneratedid" %)
1214 -== 7.27 Request the server to send an ACK ==
1230 +== 7.26 Request the server to send an ACK ==
1215 1215  
1216 1216  {{info}}
1217 1217  **AT Command: AT+PNACKMD**
... ... @@ -1224,11 +1224,40 @@
1224 1224  OK
1225 1225  )))
1226 1226  |(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1227 -1
1243 +0
1228 1228  
1229 1229  OK
1230 1230  )))
1231 1231  
1248 +== 7.27 Adjust network rejoining interval ==
1249 +
1250 +{{info}}
1251 +**AT Command: AT+RJTDC**
1252 +{{/info}}
1253 +
1254 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1255 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1256 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1257 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1258 +OK
1259 +
1260 +the interval is 30000ms = 30s
1261 +)))
1262 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1264 +)))
1265 +
1266 +{{info}}
1267 +**Downlink Command: 0x26**
1268 +{{/info}}
1269 +
1270 +Format: Command Code (0x26) followed by 2 bytes mode value.
1271 +
1272 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1273 +
1274 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1276 +
1232 1232  = 8. AT Commands Combination =
1233 1233  
1234 1234  == 8.1 Set a fix RX2DR for downlink window ==

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0