Last modified by kai on 2024/09/06 10:00
<
From version < 38.99 >
edited by Xiaoling
on 2022/06/01 11:52
To version < 7.9 >
edited by Xiaoling
on 2022/05/11 11:31
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,8 @@
1 - **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
... ... @@ -11,93 +11,34 @@
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
12 12  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13 13  
14 -(((
15 15  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
16 16  
17 -)))
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
26 26  
27 27  = 3. Support End Node and firmware version =
28 28  
29 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
30 -|=(% colspan="3" style="width: 963px;" %)(((
31 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
32 -)))
33 -|(% style="width:187px" %)(((
34 -**Model**
35 -)))|(% style="width:330px" %)(((
36 -**Description**
37 -)))|(% style="width:445px" %)(((
38 -**Firmware Version <~-~-> Stack Version**
39 -)))
40 -|(% style="width:187px" %)(((
41 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
42 -)))|(% style="width:330px" %)(((
43 -Open Source Generic LoRaWAN Sensor Node
44 -)))|(% style="width:445px" %)(((
45 -(((
46 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
47 -)))
48 -
49 -(((
50 -(((
26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
51 51  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
52 52  )))
53 -)))
54 -)))
55 -|(% style="width:187px" %)(((
56 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
57 -)))|(% style="width:330px" %)(((
58 -LoRaWAN GPS Tracker
59 -)))|(% style="width:445px" %)(((
60 -(((
61 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
62 -)))
63 -
64 -(((
65 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
66 66  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
67 67  )))
68 -)))
69 -)))
70 -|(% style="width:187px" %)(((
71 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
72 -)))|(% style="width:330px" %)(((
73 -LoRaWAN BLE Indoor Tracker
74 -)))|(% style="width:445px" %)(((
75 -LBT1 v1.0 <~-~-> DR-LWS-005;
76 -)))
77 -|(% style="width:187px" %)(((
78 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
79 -)))|(% style="width:330px" %)(((
80 -LoRaWAN RS485 Modbus Converter
81 -)))|(% style="width:445px" %)(((
82 -RS485-LN v1.3 <~-~-> DR-LWS-005;
83 -)))
84 -|(% style="width:187px" %)(((
85 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
86 -)))|(% style="width:330px" %)(((
87 -LoRaWAN Temperature & Humidity Sensor
88 -)))|(% style="width:445px" %)(((
89 -(((
90 -LHT65 v1.7 <~-~-> DR-LWS-003;
91 -)))
92 -
93 -(((
94 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
95 95  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
96 96  )))
97 -)))
98 -)))
99 99  
100 -
101 101  = 4. System Management Commands =
102 102  
103 103  == 4.1 Change Uplink Interval ==
... ... @@ -109,7 +109,7 @@
109 109  **AT Command: AT+TDC**
110 110  )))
111 111  
112 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %)
113 113  |=(% colspan="3" style="width: 724px;" %)AT+TDC
114 114  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
115 115  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
... ... @@ -125,18 +125,13 @@
125 125  **Downlink Command: 0x01**
126 126  {{/info}}
127 127  
128 -(((
129 129  Format: Command Code (0x01) followed by 3 bytes time value.
130 -)))
131 131  
132 -(((
133 133  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
134 -)))
135 135  
136 136  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
137 137  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
138 138  
139 -
140 140  == 4.2 Reboot End Node ==
141 141  
142 142  Feature: Reboot End Node to perform a new OTAA or ABP Join.
... ... @@ -145,7 +145,7 @@
145 145  **AT Command: ATZ**
146 146  {{/info}}
147 147  
148 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
149 149  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
150 150  |**Command Example**|**Function**|**Response**
151 151  |ATZ|Reset MCU|(((
... ... @@ -166,16 +166,10 @@
166 166  **Downlink Command: 0x04**
167 167  {{/info}}
168 168  
169 -(((
170 170  Format: Command Code (0x04) followed by FF.
171 -)))
172 172  
173 -(((
174 174  If the downlink payload=**04FF**, the end node will reboot.
175 175  
176 -
177 -)))
178 -
179 179  == 4.3 Reset to factory Default ==
180 180  
181 181  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
... ... @@ -184,7 +184,7 @@
184 184  **AT Command: AT+FDR**
185 185  {{/info}}
186 186  
187 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
188 188  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
189 189  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
190 190  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -205,13 +205,9 @@
205 205  **Downlink Command: 0x04**
206 206  {{/info}}
207 207  
208 -(((
209 209  Format: Command Code (0x04) followed by FE.
210 -)))
211 211  
212 -(((
213 213  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
214 -)))
215 215  
216 216  
217 217  == 4.4 Show Firmware Version ==
... ... @@ -222,10 +222,10 @@
222 222  **AT Command: AT+VER**
223 223  {{/info}}
224 224  
225 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
226 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
227 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
228 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
229 229  1.3 EU868
230 230  
231 231  OK
... ... @@ -235,25 +235,17 @@
235 235  **Downlink Command: 0x26 (Valid in 006 stack)**
236 236  {{/info}}
237 237  
238 -(((
239 239  Downlink Format: 0x26
240 -)))
241 241  
242 -(((
243 243  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
244 -)))
245 245  
246 -(((
247 247  **xx: Software Type:**
248 -)))
249 249  
250 250  * 0x00 01: LGT92 Version
251 251  * 0x00 02: LBT1
252 252  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
253 253  
254 -(((
255 255  **yy: Frequency Band:**
256 -)))
257 257  
258 258  * 0x01: EU868
259 259  * 0x02: US915
... ... @@ -266,9 +266,7 @@
266 266  * 0x09: AS923-2
267 267  * 0xa0: AS923-3
268 268  
269 -(((
270 270  **zz: Subband**
271 -)))
272 272  
273 273  firmware version: v1.1.0 ~-~-> 110
274 274  
... ... @@ -281,7 +281,7 @@
281 281  **AT Command: AT+CFG**
282 282  {{/info}}
283 283  
284 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
285 285  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
286 286  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
287 287  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -298,7 +298,6 @@
298 298  OK
299 299  )))
300 300  
301 -
302 302  = 5. Keys, IDs and EUIs management =
303 303  
304 304  == 5.1 Application EUI ==
... ... @@ -309,7 +309,7 @@
309 309  **AT Command: AT+APPEUI**
310 310  {{/info}}
311 311  
312 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
313 313  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
314 314  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
315 315  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -317,7 +317,6 @@
317 317  )))
318 318  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
319 319  
320 -
321 321  == 5.2 Application Key ==
322 322  
323 323  Feature: Get or Set the Application Key.
... ... @@ -326,7 +326,7 @@
326 326  **AT Command: AT+APPKEY**
327 327  {{/info}}
328 328  
329 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
330 330  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
331 331  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
332 332  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -342,7 +342,7 @@
342 342  **AT Command: AT+APPSKEY**
343 343  {{/info}}
344 344  
345 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
346 346  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
347 347  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
348 348  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -360,7 +360,7 @@
360 360  **AT Command: AT+DADDR**
361 361  {{/info}}
362 362  
363 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
364 364  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
365 365  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
366 366  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -378,7 +378,7 @@
378 378  **AT Command: AT+DEUI**
379 379  {{/info}}
380 380  
381 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
382 382  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
383 383  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
384 384  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -396,7 +396,7 @@
396 396  **AT Command: AT+NWKID**
397 397  {{/info}}
398 398  
399 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
400 400  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
401 401  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
402 402  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -412,7 +412,7 @@
412 412  **AT Command: AT+NWKSKEY**
413 413  {{/info}}
414 414  
415 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
416 416  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
417 417  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
418 418  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -430,7 +430,7 @@
430 430  **AT Command: AT+CFM**
431 431  {{/info}}
432 432  
433 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
434 434  |=(% colspan="3" style="width: 707px;" %)AT+CFM
435 435  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
436 436  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -456,7 +456,7 @@
456 456  **AT Command: AT+CFS**
457 457  {{/info}}
458 458  
459 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
460 460  |=(% colspan="3" style="width: 531px;" %)AT+CFS
461 461  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
462 462  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
... ... @@ -471,7 +471,7 @@
471 471  **AT Command: AT+JOIN**
472 472  {{/info}}
473 473  
474 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
475 475  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
476 476  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
477 477  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
... ... @@ -480,7 +480,6 @@
480 480  While Error in format, return AT_BUSY_ERROR
481 481  )))
482 482  
483 -
484 484  == 6.4 LoRa® Network Join Mode ==
485 485  
486 486  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
... ... @@ -489,7 +489,7 @@
489 489  **AT Command: AT+NJM**
490 490  {{/info}}
491 491  
492 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
493 493  |=(% colspan="3" style="width: 750px;" %)AT+NJM
494 494  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
495 495  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
... ... @@ -509,7 +509,6 @@
509 509  * **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
510 510  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
511 511  
512 -
513 513  == 6.5 LoRa® Network Join Status ==
514 514  
515 515  Feature: LoRa® Network Join Status.
... ... @@ -518,7 +518,7 @@
518 518  **AT Command: AT+NJS**
519 519  {{/info}}
520 520  
521 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
522 522  |=(% colspan="3" style="width: 495px;" %)AT+NJS
523 523  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
524 524  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
... ... @@ -525,7 +525,6 @@
525 525  OK
526 526  )))
527 527  
528 -
529 529  == 6.6 Print Last Received Data in Raw Format ==
530 530  
531 531  Feature: Print Last Received Data in Raw Format<port:data>.
... ... @@ -534,7 +534,7 @@
534 534  **AT Command: AT+RECV**
535 535  {{/info}}
536 536  
537 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
538 538  |=(% colspan="3" style="width: 584px;" %)AT+RECV
539 539  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
540 540  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
... ... @@ -541,7 +541,6 @@
541 541  OK
542 542  )))
543 543  
544 -
545 545  == 6.7 Print Last Received Data in Binary Format ==
546 546  
547 547  Feature: Print Last Received Data in Binary Format<port:data>.
... ... @@ -550,7 +550,7 @@
550 550  **AT Command: AT+RECVB**
551 551  {{/info}}
552 552  
553 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
554 554  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
555 555  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
556 556  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
... ... @@ -557,7 +557,6 @@
557 557  OK
558 558  )))
559 559  
560 -
561 561  == 6.8 Send Text Data ==
562 562  
563 563  Feature: Send Text Data<port:data>.
... ... @@ -566,7 +566,7 @@
566 566  **AT Command: AT+SEND**
567 567  {{/info}}
568 568  
569 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
570 570  |=(% colspan="3" style="width: 988px;" %)AT+SEND
571 571  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
572 572  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
... ... @@ -577,7 +577,6 @@
577 577  
578 578  )))
579 579  
580 -
581 581  == 6.9 Send Hexadecimal Data ==
582 582  
583 583  Feature: Send hexadecimal data along with the application port.
... ... @@ -586,7 +586,7 @@
586 586  **AT Command: AT+SENDB**
587 587  {{/info}}
588 588  
589 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
590 590  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
591 591  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
592 592  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
... ... @@ -596,7 +596,6 @@
596 596  
597 597  )))
598 598  
599 -
600 600  = 7. LoRaWAN network management =
601 601  
602 602  == 7.1 Adaptive Data Rate ==
... ... @@ -607,7 +607,7 @@
607 607  **AT Command: AT+ADR**
608 608  {{/info}}
609 609  
610 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
611 611  |=(% colspan="3" style="width: 680px;" %)AT+ADR
612 612  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
613 613  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
... ... @@ -628,7 +628,6 @@
628 628  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
629 629  * **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
630 630  
631 -
632 632  == 7.2 LoRa® Class ==
633 633  
634 634  Feature: Get or Set the Device Class(Currently only support class A, class C).
... ... @@ -637,7 +637,7 @@
637 637  **AT Command:AT+CLASS**
638 638  {{/info}}
639 639  
640 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
641 641  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
642 642  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
643 643  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
... ... @@ -647,7 +647,6 @@
647 647  
648 648  )))
649 649  
650 -
651 651  == 7.3 Duty Cycle Setting ==
652 652  
653 653  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
... ... @@ -656,7 +656,7 @@
656 656  **AT Command:AT+DCS**
657 657  {{/info}}
658 658  
659 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
660 660  |=(% colspan="3" style="width: 512px;" %)AT+DCS
661 661  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
662 662  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
... ... @@ -666,7 +666,6 @@
666 666  
667 667  )))
668 668  
669 -
670 670  == 7.4 Data Rate ==
671 671  
672 672  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
... ... @@ -675,7 +675,7 @@
675 675  **AT Command: AT+DR**
676 676  {{/info}}
677 677  
678 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
679 679  |=(% colspan="3" style="width: 463px;" %)AT+DR
680 680  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
681 681  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
... ... @@ -695,7 +695,6 @@
695 695  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
696 696  * **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+DR=0.
697 697  
698 -
699 699  == 7.5 Frame Counter Downlink ==
700 700  
701 701  Feature: Get or Set the Frame Counter Downlink.
... ... @@ -704,7 +704,7 @@
704 704  **AT Command:AT+FCD**
705 705  {{/info}}
706 706  
707 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
708 708  |=(% colspan="3" style="width: 690px;" %)AT+FCD
709 709  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
710 710  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
... ... @@ -716,7 +716,6 @@
716 716  
717 717  )))
718 718  
719 -
720 720  == 7.6 Frame Counter Uplink ==
721 721  
722 722  Feature: Get or Set the Frame Counter Uplink.
... ... @@ -725,7 +725,7 @@
725 725  **AT Command:AT+FCU**
726 726  {{/info}}
727 727  
728 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
729 729  |=(% colspan="3" style="width: 531px;" %)AT+FCU
730 730  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
731 731  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
... ... @@ -735,7 +735,6 @@
735 735  
736 736  )))
737 737  
738 -
739 739  == 7.7 Join Accept Delay1 ==
740 740  
741 741  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
... ... @@ -744,7 +744,7 @@
744 744  **AT Command:AT+JN1DL**
745 745  {{/info}}
746 746  
747 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
748 748  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
749 749  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
750 750  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
... ... @@ -754,7 +754,6 @@
754 754  
755 755  )))
756 756  
757 -
758 758  == 7.8 Join Accept Delay2 ==
759 759  
760 760  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
... ... @@ -763,7 +763,7 @@
763 763  **AT Command:AT+JN2DL**
764 764  {{/info}}
765 765  
766 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
767 767  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
768 768  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
769 769  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
... ... @@ -773,7 +773,6 @@
773 773  
774 774  )))
775 775  
776 -
777 777  == 7.9 Public Network Mode ==
778 778  
779 779  Feature: Get or Set the public network mode. (0: off, 1: on)
... ... @@ -782,7 +782,7 @@
782 782  **AT Command:AT+PNM**
783 783  {{/info}}
784 784  
785 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
786 786  |=(% colspan="3" style="width: 664px;" %)AT+PNM
787 787  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
788 788  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
... ... @@ -802,7 +802,7 @@
802 802  **AT Command:AT+RX1DL**
803 803  {{/info}}
804 804  
805 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
806 806  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
807 807  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
808 808  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
... ... @@ -812,7 +812,7 @@
812 812  
813 813  )))
814 814  
815 -== 7.11 Receive Delay2 ==
713 +== 7.11Receive Delay2 ==
816 816  
817 817  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
818 818  
... ... @@ -820,7 +820,7 @@
820 820  **AT Command:AT+RX2DL**
821 821  {{/info}}
822 822  
823 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
721 +(% style="background-color:#ffffcc; color:green; width:481.222px" %)
824 824  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
825 825  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
826 826  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
... ... @@ -838,7 +838,7 @@
838 838  **AT Command:AT+RX2DR**
839 839  {{/info}}
840 840  
841 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
739 +(% style="background-color:#ffffcc; color:green; width:525.222px" %)
842 842  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
843 843  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
844 844  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
... ... @@ -856,7 +856,7 @@
856 856  **AT Command:AT+RX2FQ**
857 857  {{/info}}
858 858  
859 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
757 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
860 860  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
861 861  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
862 862  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
... ... @@ -874,7 +874,7 @@
874 874  **AT Command:AT+TXP**
875 875  {{/info}}
876 876  
877 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
775 +(% style="background-color:#ffffcc; color:green; width:465.222px" %)
878 878  |=(% colspan="3" style="width: 462px;" %)AT+TXP
879 879  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
880 880  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
... ... @@ -899,7 +899,7 @@
899 899  **AT Command:AT+RSSI**
900 900  {{/info}}
901 901  
902 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
800 +(% style="background-color:#ffffcc; color:green; width:557.222px" %)
903 903  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
904 904  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
905 905  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
... ... @@ -914,7 +914,7 @@
914 914  **AT Command:AT+SNR**
915 915  {{/info}}
916 916  
917 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
815 +(% style="background-color:#ffffcc; color:green; width:571.222px" %)
918 918  |=(% colspan="3" style="width: 568px;" %)AT+SNR
919 919  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
920 920  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
... ... @@ -929,7 +929,7 @@
929 929  **AT Command: AT+PORT**
930 930  {{/info}}
931 931  
932 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
830 +(% style="background-color:#ffffcc; color:green; width:500.222px" %)
933 933  |=(% colspan="3" style="width: 497px;" %)AT+PORT
934 934  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
935 935  |(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
... ... @@ -956,7 +956,7 @@
956 956  **AT Command: AT+CHS**
957 957  {{/info}}
958 958  
959 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
857 +(% style="background-color:#ffffcc; color:green; width:603.222px" %)
960 960  |=(% colspan="3" style="width: 600px;" %)AT+CHS
961 961  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
962 962  |(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
... ... @@ -972,7 +972,7 @@
972 972  **AT Command: AT+CHE**
973 973  {{/info}}
974 974  
975 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
873 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
976 976  |=(% colspan="3" style="width: 707px;" %)AT+CHE
977 977  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
978 978  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
... ... @@ -1001,7 +1001,7 @@
1001 1001  **AT Command: AT+RX1WTO**
1002 1002  {{/info}}
1003 1003  
1004 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
902 +(% style="background-color:#ffffcc; color:green; width:460.222px" %)
1005 1005  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1006 1006  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1007 1007  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
... ... @@ -1009,60 +1009,46 @@
1009 1009  )))
1010 1010  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1011 1011  
1012 -(((
1013 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1014 -)))
910 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1015 1015  
1016 -[[image:image-20220526162535-1.png]]
912 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1017 1017  
1018 -(((
1019 1019  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1020 1020  
1021 -
1022 -)))
1023 -
1024 1024  == 7.21 Get or Set RXwindows2 timeout ==
1025 1025  
1026 1026  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1027 1027  
1028 -{{info}}
1029 -**AT Command: AT+RX2WTO**
1030 -{{/info}}
920 +AT Command: AT+RX2WTO
1031 1031  
1032 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1033 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1034 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1035 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
922 +|=(% colspan="3" %)AT+ RX2WTO
923 +|**Command Example**|**Function**|**Response**
924 +|AT+RX2WTO=?|Get RXwindows2 timeout|7(((
1036 1036  OK
1037 1037  )))
1038 -|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
927 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK
1039 1039  
1040 1040  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1041 1041  
1042 1042  Feature: Get or Set uplinkdwelltime
1043 1043  
1044 -{{info}}
1045 -**AT Command: AT+DWELLT**
1046 -{{/info}}
933 +AT Command: AT+DWELLT
1047 1047  
1048 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1049 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1050 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1051 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
935 +|=(% colspan="3" %)AT+DWELLT
936 +|**Command Example**|**Function**|**Response**
937 +|AT+DWELLT=?|Get uplinkdwelltime|1(((
1052 1052  OK
1053 1053  )))
1054 -|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
940 +|AT+DWELLT=0|Set uplinkdwelltime|OK
1055 1055  
1056 -{{info}}
1057 -**Downlink Command: 0x25**
1058 -{{/info}}
942 +Downlink Command: 0x25
1059 1059  
1060 1060  Format: Command Code (0x25) followed by 1 bytes state value.
1061 1061  
1062 1062  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1063 1063  
1064 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1065 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
948 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1
949 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0
1066 1066  
1067 1067  == 7.23 Set Packet Receiving Response Level ==
1068 1068  
... ... @@ -1070,11 +1070,11 @@
1070 1070  
1071 1071  RPL value:
1072 1072  
1073 -* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1074 -* **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1075 -* **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1076 -* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1077 -* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
957 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform.
958 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
959 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
960 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
961 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1078 1078  
1079 1079  Case Analyes:
1080 1080  
... ... @@ -1082,44 +1082,37 @@
1082 1082  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1083 1083  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1084 1084  
1085 -{{info}}
1086 -**AT Command: AT+RPL**
1087 -{{/info}}
969 +AT Command: AT+RPL
1088 1088  
1089 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1090 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1091 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1092 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
971 +|=(% colspan="3" %)AT+RPL
972 +|**Command Example**|**Function**|**Response**
973 +|AT+RPL=?|Get packet receiving response level|1(((
1093 1093  OK
1094 1094  )))
1095 -|(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
976 +|AT+RPL=0|Set packet receiving response level|OK
1096 1096  
1097 -{{info}}
1098 -**Downlink Command: 0x21**
1099 -{{/info}}
978 +Downlink Command: 0x21
1100 1100  
1101 1101  Format: Command Code (0x21) followed by 1 bytes level value.
1102 1102  
1103 1103  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1104 1104  
1105 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1106 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
984 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1
985 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2
1107 1107  
1108 1108  = 8. AT Commands Combination =
1109 1109  
1110 1110  == 8.1 Set a fix RX2DR for downlink window ==
1111 1111  
1112 -* **AT+ADR=0 **~-~-> Disable ADR first
1113 -* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
991 +* AT+ADR=0 ~-~-> Disable ADR first
992 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate
1114 1114  
1115 1115  == 8.2 Use Downlink Command to set a fix uplink DR ==
1116 1116  
1117 -{{info}}
1118 -**Downlink Command: 0x22000500**
1119 -{{/info}}
996 +Downlink Command: 0x22000500
1120 1120  
1121 1121  Same as:
1122 1122  
1123 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1124 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1125 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1000 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]]
1001 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
1002 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220511120050-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -136.3 KB
Content
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0