Changes for page End Device AT Commands and Downlink Command
Last modified by kai on 2024/09/06 10:00
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 2 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,9 +1,8 @@ 1 - **Contents：**1 +Contens 2 2 3 3 {{toc/}} 4 4 5 5 6 - 7 7 = 1. Introduction = 8 8 9 9 Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands: ... ... @@ -11,93 +11,34 @@ 11 11 * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device. 12 12 * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device. 13 13 14 -((( 15 15 **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.** 16 16 17 -))) 18 18 19 19 = 2. How to use AT Commands or Downlink command = 20 20 21 21 * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]] 22 22 * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command: 23 -** Use HEX format to send a downlink: [[TTN v3>>Notes 24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes 25 -** See use note for more serves [[Servers Note>>doc :Main.WebHome]](IoT LoRaWANServer)20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]] 21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]]. 22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]] 26 26 27 27 = 3. Support End Node and firmware version = 28 28 29 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %) 30 -|=(% colspan="3" style="width: 963px;" %)((( 31 -Dragino STM32 base hardware Firmware / LoRaWAN stack list 32 -))) 33 -|(% style="width:187px" %)((( 34 -**Model** 35 -)))|(% style="width:330px" %)((( 36 -**Description** 37 -)))|(% style="width:445px" %)((( 38 -**Firmware Version <~-~-> Stack Version** 39 -))) 40 -|(% style="width:187px" %)((( 41 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]], 42 -)))|(% style="width:330px" %)((( 43 -Open Source Generic LoRaWAN Sensor Node 44 -)))|(% style="width:445px" %)((( 45 -((( 46 -LSN50 v1.6.0 <~-~-> DR-LWS-003; 47 -))) 48 - 49 -((( 50 -((( 26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %) 27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list 28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version** 29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 51 51 LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 52 52 ))) 53 -))) 54 -))) 55 -|(% style="width:187px" %)((( 56 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]], 57 -)))|(% style="width:330px" %)((( 58 -LoRaWAN GPS Tracker 59 -)))|(% style="width:445px" %)((( 60 -((( 61 -LGT92 v1.6.3 <~-~-> DR-LWS-003; 62 -))) 63 - 64 -((( 65 -((( 32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;((( 66 66 LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version 67 67 ))) 68 -))) 69 -))) 70 -|(% style="width:187px" %)((( 71 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]], 72 -)))|(% style="width:330px" %)((( 73 -LoRaWAN BLE Indoor Tracker 74 -)))|(% style="width:445px" %)((( 75 -LBT1 v1.0 <~-~-> DR-LWS-005; 76 -))) 77 -|(% style="width:187px" %)((( 78 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]], 79 -)))|(% style="width:330px" %)((( 80 -LoRaWAN RS485 Modbus Converter 81 -)))|(% style="width:445px" %)((( 82 -RS485-LN v1.3 <~-~-> DR-LWS-005; 83 -))) 84 -|(% style="width:187px" %)((( 85 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]], 86 -)))|(% style="width:330px" %)((( 87 -LoRaWAN Temperature & Humidity Sensor 88 -)))|(% style="width:445px" %)((( 89 -((( 90 -LHT65 v1.7 <~-~-> DR-LWS-003; 91 -))) 92 - 93 -((( 94 -((( 35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005; 36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005; 37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;((( 95 95 LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version 96 96 ))) 97 -))) 98 -))) 99 99 100 - 101 101 = 4. System Management Commands = 102 102 103 103 == 4.1 Change Uplink Interval == ... ... @@ -109,7 +109,7 @@ 109 109 **AT Command: AT+TDC** 110 110 ))) 111 111 112 -(% border="1"style="background-color:#ffffcc; color:green; width:727.222px" %)52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %) 113 113 |=(% colspan="3" style="width: 724px;" %)AT+TDC 114 114 |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response** 115 115 |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000((( ... ... @@ -125,18 +125,13 @@ 125 125 **Downlink Command: 0x01** 126 126 {{/info}} 127 127 128 -((( 129 129 Format: Command Code (0x01) followed by 3 bytes time value. 130 -))) 131 131 132 -((( 133 133 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01. 134 -))) 135 135 136 136 * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds 137 137 * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds 138 138 139 - 140 140 == 4.2 Reboot End Node == 141 141 142 142 Feature: Reboot End Node to perform a new OTAA or ABP Join. ... ... @@ -145,7 +145,7 @@ 145 145 **AT Command: ATZ** 146 146 {{/info}} 147 147 148 -(% border=" 1" style="background-color:#ffffcc; color:green; width:727.222px" %)83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %) 149 149 |=(% colspan="3" %)ATZ: Trig a reset of the MCU 150 150 |**Command Example**|**Function**|**Response** 151 151 |ATZ|Reset MCU|((( ... ... @@ -166,16 +166,10 @@ 166 166 **Downlink Command: 0x04** 167 167 {{/info}} 168 168 169 -((( 170 170 Format: Command Code (0x04) followed by FF. 171 -))) 172 172 173 -((( 174 174 If the downlink payload=**04FF**, the end node will reboot. 175 175 176 - 177 -))) 178 - 179 179 == 4.3 Reset to factory Default == 180 180 181 181 Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command. ... ... @@ -184,7 +184,7 @@ 184 184 **AT Command: AT+FDR** 185 185 {{/info}} 186 186 187 -(% border="1"style="background-color:#ffffcc; color:green; width:831.222px" %)116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %) 188 188 |=(% colspan="3" style="width: 828px;" %)Reset to factory default 189 189 |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response** 190 190 |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)((( ... ... @@ -205,13 +205,9 @@ 205 205 **Downlink Command: 0x04** 206 206 {{/info}} 207 207 208 -((( 209 209 Format: Command Code (0x04) followed by FE. 210 -))) 211 211 212 -((( 213 213 If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve. 214 -))) 215 215 216 216 217 217 == 4.4 Show Firmware Version == ... ... @@ -222,10 +222,10 @@ 222 222 **AT Command: AT+VER** 223 223 {{/info}} 224 224 225 -(% border="1"style="background-color:#ffffcc; color:green; width:586px" %)226 -|=(% colspan="3" style="width: 583px;"%)AT+VER: Image Version and Frequency Band227 -| (% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**228 -| (% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((150 +(% style="background-color:#ffffcc; color:green" %) 151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band 152 +|**Command Example**|**Function**|**Response** 153 +|AT+VER=?|Show Image version and Frequency Band|((( 229 229 1.3 EU868 230 230 231 231 OK ... ... @@ -235,25 +235,17 @@ 235 235 **Downlink Command: 0x26 (Valid in 006 stack)** 236 236 {{/info}} 237 237 238 -((( 239 239 Downlink Format: 0x26 240 -))) 241 241 242 -((( 243 243 Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes 244 -))) 245 245 246 -((( 247 247 **xx: Software Type:** 248 -))) 249 249 250 250 * 0x00 01: LGT92 Version 251 251 * 0x00 02: LBT1 252 252 * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01 253 253 254 -((( 255 255 **yy: Frequency Band:** 256 -))) 257 257 258 258 * 0x01: EU868 259 259 * 0x02: US915 ... ... @@ -266,9 +266,7 @@ 266 266 * 0x09: AS923-2 267 267 * 0xa0: AS923-3 268 268 269 -((( 270 270 **zz: Subband** 271 -))) 272 272 273 273 firmware version: v1.1.0 ~-~-> 110 274 274 ... ... @@ -281,7 +281,7 @@ 281 281 **AT Command: AT+CFG** 282 282 {{/info}} 283 283 284 -(% border="1"style="background-color:#ffffcc; color:green; width:599.222px" %)199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %) 285 285 |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations 286 286 |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response** 287 287 |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)((( ... ... @@ -309,7 +309,7 @@ 309 309 **AT Command: AT+APPEUI** 310 310 {{/info}} 311 311 312 -(% border="1"style="background-color:#ffffcc; color:green; width:686.222px" %)227 +(% style="background-color:#ffffcc; color:green; width:686.222px" %) 313 313 |=(% colspan="3" style="width: 683px;" %)AT+APPEUI 314 314 |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response** 315 315 |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00((( ... ... @@ -317,7 +317,6 @@ 317 317 ))) 318 318 |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK 319 319 320 - 321 321 == 5.2 Application Key == 322 322 323 323 Feature: Get or Set the Application Key. ... ... @@ -326,7 +326,7 @@ 326 326 **AT Command: AT+APPKEY** 327 327 {{/info}} 328 328 329 -(% border="1"style="background-color:#ffffcc; color:green; width:976.222px" %)243 +(% style="background-color:#ffffcc; color:green; width:976.222px" %) 330 330 |=(% colspan="3" style="width: 973px;" %)AT+APPKEY 331 331 |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response** 332 332 |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( ... ... @@ -338,17 +338,14 @@ 338 338 339 339 Feature: Get or Set the Application Session Key. 340 340 341 -{{info}} 342 -**AT Command: AT+APPSKEY** 343 -{{/info}} 255 +AT Command: AT+APPSKEY 344 344 345 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %) 346 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY 347 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response** 348 -|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 257 +|=(% colspan="3" %)AT+APPSKEY 258 +|**Command Example**|**Function**|**Response** 259 +|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 349 349 OK 350 350 ))) 351 -| (% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)(((262 +|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 352 352 OK 353 353 ))) 354 354 ... ... @@ -356,35 +356,29 @@ 356 356 357 357 Feature: Get or Set the Device Address. 358 358 359 -{{info}} 360 -**AT Command: AT+DADDR** 361 -{{/info}} 270 +AT Command: AT+DADDR 362 362 363 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %) 364 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR 365 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response** 366 -|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)((( 272 +|=(% colspan="3" %)AT+DADDR 273 +|**Command Example**|**Function**|**Response** 274 +|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 367 367 A8 40 41 FF 368 368 369 369 OK 370 370 ))) 371 -| (% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK279 +|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK 372 372 373 373 == 5.5 Device EUI == 374 374 375 375 Feature: Get or Set the Device EUI. 376 376 377 -{{info}} 378 -**AT Command: AT+DEUI** 379 -{{/info}} 285 +AT Command: AT+DEUI 380 380 381 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %) 382 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI 383 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response** 384 -|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55((( 287 +|=(% colspan="3" %)AT+DEUI 288 +|**Command Example**|**Function**|**Response** 289 +|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55((( 385 385 OK 386 386 ))) 387 -| (% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((292 +|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)((( 388 388 OK 389 389 ))) 390 390 ... ... @@ -392,33 +392,27 @@ 392 392 393 393 Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection) 394 394 395 -{{info}} 396 -**AT Command: AT+NWKID** 397 -{{/info}} 300 +AT Command: AT+NWKID 398 398 399 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %) 400 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID 401 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response** 402 -|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff((( 302 +|=(% colspan="3" %)AT+NWKID 303 +|**Command Example**|**Function**|**Response** 304 +|AT+NWKID=?|Get the Network ID.|a8 40 41 ff((( 403 403 OK 404 404 ))) 405 -| (% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK307 +|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK 406 406 407 407 == 5.7 Network Session Key == 408 408 409 409 Feature: Get or Set the Network Session Key 410 410 411 -{{info}} 412 -**AT Command: AT+NWKSKEY** 413 -{{/info}} 313 +AT Command: AT+NWKSKEY 414 414 415 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %) 416 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY 417 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response** 418 -|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 315 +|=(% colspan="3" %)AT+NWKSKEY 316 +|**Command Example**|**Function**|**Response** 317 +|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 419 419 OK 420 420 ))) 421 -| (% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK320 +|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK 422 422 423 423 = 6. Joining and sending date on LoRaWAN network = 424 424 ... ... @@ -426,18 +426,15 @@ 426 426 427 427 Feature: Get or Set the confirmation mode (0-1). 428 428 429 -{{info}} 430 -**AT Command: AT+CFM** 431 -{{/info}} 328 +AT Command: AT+CFM 432 432 433 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 434 -|=(% colspan="3" style="width: 707px;" %)AT+CFM 435 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response** 436 -|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0((( 330 +|=(% colspan="3" %)AT+CFM 331 +|**Command Example**|**Function**|**Response** 332 +|AT+CFM=?|Get the confirmation mode|0((( 437 437 OK 438 438 ))) 439 -| (% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK440 -| (% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR335 +|AT+CFM=1|Set the confirmation mode|OK 336 +|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR 441 441 442 442 Downlink Command: 0x05 443 443 ... ... @@ -452,14 +452,11 @@ 452 452 453 453 Feature: Get confirmation status of the last AT+SEND (0-1). 454 454 455 -{{info}} 456 -**AT Command: AT+CFS** 457 -{{/info}} 351 +AT Command: AT+CFS 458 458 459 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 460 -|=(% colspan="3" style="width: 531px;" %)AT+CFS 461 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response** 462 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0((( 353 +|=(% colspan="3" %)AT+CFS 354 +|**Command Example**|**Function**|**Response** 355 +|AT+CFS=?|Get confirmation status|0((( 463 463 OK 464 464 ))) 465 465 ... ... @@ -467,109 +467,84 @@ 467 467 468 468 Feature: Join network. 469 469 470 -{{info}} 471 -**AT Command: AT+JOIN** 472 -{{/info}} 363 +AT Command: AT+JOIN 473 473 474 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %) 475 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN 476 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response** 477 -|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network((( 365 +|=(% colspan="3" %)AT+JOIN 366 +|**Command Example**|**Function**|**Response** 367 +|AT+JOIN ?|Get imformation.|AT+JOIN: Join network((( 478 478 OK 479 479 480 480 While Error in format, return AT_BUSY_ERROR 481 481 ))) 482 482 483 - 484 484 == 6.4 LoRa® Network Join Mode == 485 485 486 486 Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA). 487 487 488 -{{info}} 489 -**AT Command: AT+NJM** 490 -{{/info}} 377 +AT Command: AT+NJM 491 491 492 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %) 493 -|=(% colspan="3" style="width: 750px;" %)AT+NJM 494 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response** 495 -|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1((( 379 +|=(% colspan="3" %)AT+NJM 380 +|**Command Example**|**Function**|**Response** 381 +|AT+NJM=?|Get the Network Join Mode|1((( 496 496 OK 497 497 ))) 498 -| (% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK499 -| (% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR384 +|AT+NJM=0|Set the Network Join Mode|OK 385 +|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR 500 500 501 -{{info}} 502 -**Downlink Command: 0x20** 503 -{{/info}} 387 +Downlink Command: 0x20 504 504 505 505 Format: Command Code (0x20) followed by 1 bytes mode value. 506 506 507 507 If the downlink payload=2000, it means set the Network Join Mode, while type code is 20. 508 508 509 -* **Example 1:**Downlink Payload:**2000**~/~/ Set AT+NJM=O510 -* **Example 2:**Downlink Payload:**2001**~/~/ Set AT+NJM=1393 +* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O 394 +* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1 511 511 512 - 513 513 == 6.5 LoRa® Network Join Status == 514 514 515 515 Feature: LoRa® Network Join Status. 516 516 517 -{{info}} 518 -**AT Command: AT+NJS** 519 -{{/info}} 400 +AT Command: AT+NJS 520 520 521 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %) 522 -|=(% colspan="3" style="width: 495px;" %)AT+NJS 523 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response** 524 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0((( 402 +|=(% colspan="3" %)AT+NJS 403 +|**Command Example**|**Function**|**Response** 404 +|AT+NJS=?|Get the join status.|0((( 525 525 OK 526 526 ))) 527 527 528 - 529 529 == 6.6 Print Last Received Data in Raw Format == 530 530 531 531 Feature: Print Last Received Data in Raw Format<port:data>. 532 532 533 -{{info}} 534 -**AT Command: AT+RECV** 535 -{{/info}} 412 +AT Command: AT+RECV 536 536 537 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 538 -|=(% colspan="3" style="width: 584px;" %)AT+RECV 539 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response** 540 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:((( 414 +|=(% colspan="3" %)AT+RECV 415 +|**Command Example**|**Function**|**Response** 416 +|AT+RECV=?|print last received data in raw format.|0:((( 541 541 OK 542 542 ))) 543 543 544 - 545 545 == 6.7 Print Last Received Data in Binary Format == 546 546 547 547 Feature: Print Last Received Data in Binary Format<port:data>. 548 548 549 -{{info}} 550 -**AT Command: AT+RECVB** 551 -{{/info}} 424 +AT Command: AT+RECVB 552 552 553 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %) 554 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB 555 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response** 556 -|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010((( 426 +|=(% colspan="3" %)AT+RECVB 427 +|**Command Example**|**Function**|**Response** 428 +|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010((( 557 557 OK 558 558 ))) 559 559 560 - 561 561 == 6.8 Send Text Data == 562 562 563 563 Feature: Send Text Data<port:data>. 564 564 565 -{{info}} 566 -**AT Command: AT+SEND** 567 -{{/info}} 436 +AT Command: AT+SEND 568 568 569 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %) 570 -|=(% colspan="3" style="width: 988px;" %)AT+SEND 571 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response** 572 -|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK((( 438 +|=(% colspan="3" %)AT+SEND 439 +|**Command Example**|**Function**|**Response** 440 +|AT+SEND=12:hello world|Send text data along with the application port.|OK((( 573 573 While Error in format, return 574 574 575 575 AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED ... ... @@ -577,26 +577,21 @@ 577 577 578 578 ))) 579 579 580 - 581 581 == 6.9 Send Hexadecimal Data == 582 582 583 583 Feature: Send hexadecimal data along with the application port. 584 584 585 -{{info}} 586 -**AT Command: AT+SENDB** 587 -{{/info}} 452 +AT Command: AT+SENDB 588 588 589 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %) 590 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB 591 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response** 592 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK 593 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return((( 454 +|=(% colspan="3" %)AT+SENDB 455 +|**Command Example**|**Function**|**Response** 456 +|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK 457 +|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return((( 594 594 AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED 595 595 596 596 597 597 ))) 598 598 599 - 600 600 = 7. LoRaWAN network management = 601 601 602 602 == 7.1 Adaptive Data Rate == ... ... @@ -603,192 +603,154 @@ 603 603 604 604 Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on). 605 605 606 -{{info}} 607 -**AT Command: AT+ADR** 608 -{{/info}} 609 609 610 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %) 611 -|=(% colspan="3" style="width: 680px;" %)AT+ADR 612 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response** 613 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1((( 470 +AT Command: AT+ADR 471 + 472 +|=(% colspan="3" %)AT+ADR 473 +|**Command Example**|**Function**|**Response** 474 +|AT+ADR=?|Get the Adaptive Data Rate setting.|1((( 614 614 OK 615 615 ))) 616 -| (% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK617 -| (% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((477 +|AT+ADR=0|Set the Adaptive Data Rate setting.|OK 478 +|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return((( 618 618 AT_PARAM_ERROR 619 619 ))) 620 620 621 -{{info}} 622 -**Downlink Command: 0x22** 623 -{{/info}} 482 +Downlink Command: 0x22 624 624 625 625 626 626 If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22. 627 627 628 -* **Example 1**: Downlink Payload:**2201**~/~/ Set AT+ADR=1.629 -* **Example 2**: Downlink Payload:**2200FFFF**~/~/ Set AT+ADR=0.487 +* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1. 488 +* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0. 630 630 631 - 632 632 == 7.2 LoRa® Class == 633 633 634 634 Feature: Get or Set the Device Class(Currently only support class A, class C). 635 635 636 -{{info}} 637 -**AT Command:AT+CLASS** 638 -{{/info}} 494 +AT Command:AT+CLASS 639 639 640 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %) 641 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS 642 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response** 643 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A((( 496 +|=(% colspan="3" %)AT+CLASS 497 +|**Command Example**|**Function**|**Response** 498 +|AT+CLASS=?|Get the Device Class.|A((( 644 644 OK 645 645 ))) 646 -| (% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((501 +|AT+CLASS=C|Set the Device Class.|OK((( 647 647 648 648 ))) 649 649 650 - 651 651 == 7.3 Duty Cycle Setting == 652 652 653 653 Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing. 654 654 655 -{{info}} 656 -**AT Command:AT+DCS** 657 -{{/info}} 509 +AT Command:AT+DCS 658 658 659 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %) 660 -|=(% colspan="3" style="width: 512px;" %)AT+DCS 661 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response** 662 -|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1((( 511 +|=(% colspan="3" %)AT+DCS 512 +|**Command Example**|**Function**|**Response** 513 +|AT+DCS=?|Get the ETSI Duty Cycle setting.|1((( 663 663 OK 664 664 ))) 665 -| (% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((516 +|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK((( 666 666 667 667 ))) 668 668 669 - 670 670 == 7.4 Data Rate == 671 671 672 672 Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server 673 673 674 -{{info}} 675 -**AT Command: AT+DR** 676 -{{/info}} 524 +AT Command: AT+DR 677 677 678 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %) 679 -|=(% colspan="3" style="width: 463px;" %)AT+DR 680 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response** 681 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5((( 526 +|=(% colspan="3" %)AT+DR 527 +|**Command Example**|**Function**|**Response** 528 +|AT+DR=?|Get the Data Rate.|5((( 682 682 OK 683 683 ))) 684 -| (% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((531 +|AT+DR=2|Set the Data Rate.|OK((( 685 685 686 686 ))) 687 687 688 -{{info}} 689 -**Downlink Command: 0x2200aaFF** 690 -{{/info}} 535 +Downlink Command: 0x2200aaFF 691 691 692 692 693 693 If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF. 694 694 695 -* **Example 1**: Downlink Payload:**220001FF**~/~/ Set AT+DR=1.696 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+DR=0.540 +* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1. 541 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0. 697 697 698 - 699 699 == 7.5 Frame Counter Downlink == 700 700 701 701 Feature: Get or Set the Frame Counter Downlink. 702 702 703 -{{info}} 704 -**AT Command:AT+FCD** 705 -{{/info}} 547 +AT Command:AT+FCD 706 706 707 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %) 708 -|=(% colspan="3" style="width: 690px;" %)AT+FCD 709 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response** 710 -|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0((( 549 +|=(% colspan="3" %)AT+FCD 550 +|**Command Example**|**Function**|**Response** 551 +|AT+FCD=?|Get the Frame Counter Downlink.|0((( 711 711 OK 712 712 ))) 713 -| (% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((554 +|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)((( 714 714 OK 715 715 716 716 717 717 ))) 718 718 719 - 720 720 == 7.6 Frame Counter Uplink == 721 721 722 722 Feature: Get or Set the Frame Counter Uplink. 723 723 724 -{{info}} 725 -**AT Command:AT+FCU** 726 -{{/info}} 564 +AT Command:AT+FCU 727 727 728 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 729 -|=(% colspan="3" style="width: 531px;" %)AT+FCU 730 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response** 731 -|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0((( 566 +|=(% colspan="3" %)AT+FCU 567 +|**Command Example**|**Function**|**Response** 568 +|AT+FCU=?|Get the Frame Counter Uplink.|0((( 732 732 OK 733 733 ))) 734 -| (% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((571 +|AT+FCU=10|Set the Frame Counter Uplink.|OK((( 735 735 736 736 ))) 737 737 738 - 739 739 == 7.7 Join Accept Delay1 == 740 740 741 741 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms. 742 742 743 -{{info}} 744 -**AT Command:AT+JN1DL** 745 -{{/info}} 579 +AT Command:AT+JN1DL 746 746 747 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %) 748 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL 749 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response** 750 -|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000((( 581 +|=(% colspan="3" %)AT+JN1DL 582 +|**Command Example**|**Function**|**Response** 583 +|AT+JN1DL=?|Get the Join Accept Delay.|5000((( 751 751 OK 752 752 ))) 753 -| (% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((586 +|AT+JN1DL=10000|Set the Join Accept Delay.|OK((( 754 754 755 755 ))) 756 756 757 - 758 758 == 7.8 Join Accept Delay2 == 759 759 760 760 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms. 761 761 762 -{{info}} 763 -**AT Command:AT+JN2DL** 764 -{{/info}} 594 +AT Command:AT+JN2DL 765 765 766 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %) 767 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL 768 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response** 769 -|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000((( 596 +|=(% colspan="3" %)AT+JN2DL 597 +|**Command Example**|**Function**|**Response** 598 +|AT+JN2DL=?|Get the Join Accept Delay.|6000((( 770 770 OK 771 771 ))) 772 -| (% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((601 +|AT+JN2DL=20000|Set the Join Accept Delay.|OK((( 773 773 774 774 ))) 775 775 776 - 777 777 == 7.9 Public Network Mode == 778 778 779 779 Feature: Get or Set the public network mode. (0: off, 1: on) 780 780 781 -{{info}} 782 -**AT Command:AT+PNM** 783 -{{/info}} 609 +AT Command:AT+PNM 784 784 785 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %) 786 -|=(% colspan="3" style="width: 664px;" %)AT+PNM 787 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response** 788 -|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1((( 611 +|=(% colspan="3" %)AT+PNM 612 +|**Command Example**|**Function**|**Response** 613 +|AT+PNM=?|Get the public network mode.|1((( 789 789 OK 790 790 ))) 791 -| (% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((616 +|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)((( 792 792 OK 793 793 794 794 ... ... @@ -798,35 +798,29 @@ 798 798 799 799 Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms 800 800 801 -{{info}} 802 -**AT Command:AT+RX1DL** 803 -{{/info}} 626 +AT Command:AT+RX1DL 804 804 805 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %) 806 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL 807 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response** 808 -|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000((( 628 +|=(% colspan="3" %)AT+RX1DL 629 +|**Command Example**|**Function**|**Response** 630 +|AT+RX1DL=?|Get the delay.|1000((( 809 809 OK 810 810 ))) 811 -| (% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((633 +|AT+RX1DL=1500|Set the delay.|OK((( 812 812 813 813 ))) 814 814 815 -== 7.11 637 +== 7.11Receive Delay2 == 816 816 817 817 Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms 818 818 819 -{{info}} 820 -**AT Command:AT+RX2DL** 821 -{{/info}} 641 +AT Command:AT+RX2DL 822 822 823 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %) 824 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL 825 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response** 826 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000((( 643 +|=(% colspan="3" %)AT+RX2DL 644 +|**Command Example**|**Function**|**Response** 645 +|AT+RX2DL=?|Get the delay.|2000((( 827 827 OK 828 828 ))) 829 -| (% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((648 +|AT+RX2DL=2500|Set the delay.|OK((( 830 830 831 831 ))) 832 832 ... ... @@ -834,17 +834,14 @@ 834 834 835 835 Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X) 836 836 837 -{{info}} 838 -**AT Command:AT+RX2DR** 839 -{{/info}} 656 +AT Command:AT+RX2DR 840 840 841 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %) 842 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR 843 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response** 844 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2((( 658 +|=(% colspan="3" %)AT+RX2DR 659 +|**Command Example**|**Function**|**Response** 660 +|AT+RX2DR=?|Get the Rx2 window data rate.|2((( 845 845 OK 846 846 ))) 847 -| (% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((663 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK((( 848 848 849 849 ))) 850 850 ... ... @@ -852,17 +852,14 @@ 852 852 853 853 Feature: Get or Set the Rx2 window frequency 854 854 855 -{{info}} 856 -**AT Command:AT+RX2FQ** 857 -{{/info}} 671 +AT Command:AT+RX2FQ 858 858 859 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 860 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ 861 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response** 862 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000((( 673 +|=(% colspan="3" %)AT+RX2FQ 674 +|**Command Example**|**Function**|**Response** 675 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000((( 863 863 OK 864 864 ))) 865 -| (% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((678 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK((( 866 866 867 867 ))) 868 868 ... ... @@ -870,17 +870,14 @@ 870 870 871 871 Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. ) 872 872 873 -{{info}} 874 -**AT Command:AT+TXP** 875 -{{/info}} 686 +AT Command:AT+TXP 876 876 877 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %) 878 -|=(% colspan="3" style="width: 462px;" %)AT+TXP 879 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response** 880 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0((( 688 +|=(% colspan="3" %)AT+TXP 689 +|**Command Example**|**Function**|**Response** 690 +|AT+TXP=?|Get the Transmit Power.|0((( 881 881 OK 882 882 ))) 883 -| (% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((693 +|AT+TXP=1|Set the Transmit Power.|OK((( 884 884 885 885 ))) 886 886 ... ... @@ -888,21 +888,18 @@ 888 888 889 889 If the downlink payload=22000100, it means setting the TXP to 0. 890 890 891 -* **Example 1**: Downlink Payload:**22000102**~/~/ Set AT+TXP=2.892 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+TXP=0.701 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2. 702 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0. 893 893 894 894 == 7.15 RSSI of the Last Received Packet == 895 895 896 896 Feature: Get or Set the Rx2 window frequency 897 897 898 -{{info}} 899 -**AT Command:AT+RSSI** 900 -{{/info}} 708 +AT Command:AT+RSSI 901 901 902 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %) 903 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI 904 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response** 905 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0((( 710 +|=(% colspan="3" %)AT+RSSI 711 +|**Command Example**|**Function**|**Response** 712 +|AT+RSSI=?|Get the RSSI of the last received packet.|0((( 906 906 OK 907 907 ))) 908 908 ... ... @@ -910,14 +910,11 @@ 910 910 911 911 Feature: Get the SNR of the last received packet 912 912 913 -{{info}} 914 -**AT Command:AT+SNR** 915 -{{/info}} 720 +AT Command:AT+SNR 916 916 917 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %) 918 -|=(% colspan="3" style="width: 568px;" %)AT+SNR 919 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response** 920 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0((( 722 +|=(% colspan="3" %)AT+SNR 723 +|**Command Example**|**Function**|**Response** 724 +|AT+SNR=?|Get the RSSI of the last received packet.|0((( 921 921 OK 922 922 ))) 923 923 ... ... @@ -925,144 +925,114 @@ 925 925 926 926 Feature: Get or set the application port. 927 927 928 -{{info}} 929 -**AT Command: AT+PORT** 930 -{{/info}} 732 +AT Command: AT+PORT 931 931 932 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %) 933 -|=(% colspan="3" style="width: 497px;" %)AT+PORT 934 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response** 935 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21((( 734 +|=(% colspan="3" %)AT+PORT 735 +|**Command Example**|**Function**|**Response** 736 +|AT+PORT=?|Get the application port|21((( 936 936 OK 937 937 ))) 938 -| (% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK739 +|AT+PORT=21|Set the application port|OK 939 939 940 -{{info}} 941 -**Downlink Command: 0x23** 942 -{{/info}} 741 +Downlink Command: 0x23 943 943 944 944 Format: Command Code (0x23) followed by 1 bytes port value. 945 945 946 946 If the downlink payload=2301, it means set the application port to 1, while type code is 23. 947 947 948 -* **Example 1**: Downlink Payload:**2301**~/~/ set the application port to 1949 -* **Example 2**: Downlink Payload:**2305**~/~/ set the application port to 5747 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1 748 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5 950 950 951 951 == 7.18 Single Channel Mode == 952 952 953 953 Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode. 954 954 955 -{{info}} 956 -**AT Command: AT+CHS** 957 -{{/info}} 754 +AT Command: AT+CHS 958 958 959 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %) 960 -|=(% colspan="3" style="width: 600px;" %)AT+CHS 961 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response** 962 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0((( 756 +|=(% colspan="3" %)AT+CHS 757 +|**Command Example**|**Function**|**Response** 758 +|AT+CHS=?|Get Frequency for Single Channel Mode|0((( 963 963 OK 964 964 ))) 965 -| (% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK761 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK 966 966 967 967 == 7.19 Eight Channel Mode == 968 968 969 969 Feature: Get or Set eight channels mode,Only for US915,AU915,CN470. 970 970 971 -{{info}} 972 -**AT Command: AT+CHE** 973 -{{/info}} 767 +AT Command: AT+CHE 974 974 975 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 976 -|=(% colspan="3" style="width: 707px;" %)AT+CHE 977 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response** 978 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1((( 769 +|=(% colspan="3" %)AT+CHE 770 +|**Command Example**|**Function**|**Response** 771 +|AT+CHE=?|Get eight channels mode|1((( 979 979 902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7 980 980 981 981 OK 982 982 ))) 983 -| (% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK776 +|AT+CHE=1|Set eight channels mode|OK 984 984 985 -{{info}} 986 -**Downlink Command: 0x24** 987 -{{/info}} 778 +Downlink Command: 0x24 988 988 989 989 Format: Command Code (0x24) followed by 1 bytes channel value. 990 990 991 991 If the downlink payload=2401, it means set channel mode to 1, while type code is 24. 992 992 993 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1994 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5784 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1 785 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5 995 995 996 996 == 7.20 Get or Set RXwindows1 timeout == 997 997 998 998 Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255). 999 999 1000 -{{info}} 1001 -**AT Command: AT+RX1WTO** 1002 -{{/info}} 791 +AT Command: AT+RX1WTO 1003 1003 1004 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %) 1005 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO 1006 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response** 1007 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14((( 793 +|=(% colspan="3" %)AT+ RX1WTO 794 +|**Command Example**|**Function**|**Response** 795 +|AT+RX1WTO=?|Get RXwindows1 timeout|14((( 1008 1008 OK 1009 1009 ))) 1010 -| (% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK798 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK 1011 1011 1012 -((( 1013 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1014 -))) 800 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1015 1015 1016 -[[image:image -20220526162535-1.png]]802 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]] 1017 1017 1018 -((( 1019 1019 Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink. 1020 1020 1021 - 1022 -))) 1023 - 1024 1024 == 7.21 Get or Set RXwindows2 timeout == 1025 1025 1026 1026 Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255). 1027 1027 1028 -{{info}} 1029 -**AT Command: AT+RX2WTO** 1030 -{{/info}} 810 +AT Command: AT+RX2WTO 1031 1031 1032 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1033 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO 1034 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response** 1035 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7((( 812 +|=(% colspan="3" %)AT+ RX2WTO 813 +|**Command Example**|**Function**|**Response** 814 +|AT+RX2WTO=?|Get RXwindows2 timeout|7((( 1036 1036 OK 1037 1037 ))) 1038 -| (% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK817 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK 1039 1039 1040 1040 == 7.22 Setting up uplinkdwelltime (as923, au915) == 1041 1041 1042 1042 Feature: Get or Set uplinkdwelltime 1043 1043 1044 -{{info}} 1045 -**AT Command: AT+DWELLT** 1046 -{{/info}} 823 +AT Command: AT+DWELLT 1047 1047 1048 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1049 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT 1050 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response** 1051 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1((( 825 +|=(% colspan="3" %)AT+DWELLT 826 +|**Command Example**|**Function**|**Response** 827 +|AT+DWELLT=?|Get uplinkdwelltime|1((( 1052 1052 OK 1053 1053 ))) 1054 -| (% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK830 +|AT+DWELLT=0|Set uplinkdwelltime|OK 1055 1055 1056 -{{info}} 1057 -**Downlink Command: 0x25** 1058 -{{/info}} 832 +Downlink Command: 0x25 1059 1059 1060 1060 Format: Command Code (0x25) followed by 1 bytes state value. 1061 1061 1062 1062 If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25. 1063 1063 1064 -* **Example 1**: Downlink Payload:**2501**~/~/ set uplinkdwelltime to 11065 -* **Example 2**: Downlink Payload:**2500**~/~/ set uplinkdwelltime to 0838 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1 839 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0 1066 1066 1067 1067 == 7.23 Set Packet Receiving Response Level == 1068 1068 ... ... @@ -1070,11 +1070,11 @@ 1070 1070 1071 1071 RPL value: 1072 1072 1073 -* **AT+RPL=0:**Device won't immediately reply any downlink commands from platform.1074 -* **AT+RPL=1:**Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.1075 -* **AT+RPL=2:**Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.1076 -* **AT+RPL=3:**Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.1077 -* **AT+RPL=4:**Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.847 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform. 848 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00. 849 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command. 850 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command. 851 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands. 1078 1078 1079 1079 Case Analyes: 1080 1080 ... ... @@ -1082,44 +1082,37 @@ 1082 1082 * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command. 1083 1083 * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command. 1084 1084 1085 -{{info}} 1086 -**AT Command: AT+RPL** 1087 -{{/info}} 859 +AT Command: AT+RPL 1088 1088 1089 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %) 1090 -|=(% colspan="3" style="width: 533px;" %)AT+RPL 1091 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response** 1092 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1((( 861 +|=(% colspan="3" %)AT+RPL 862 +|**Command Example**|**Function**|**Response** 863 +|AT+RPL=?|Get packet receiving response level|1((( 1093 1093 OK 1094 1094 ))) 1095 -| (% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK866 +|AT+RPL=0|Set packet receiving response level|OK 1096 1096 1097 -{{info}} 1098 -**Downlink Command: 0x21** 1099 -{{/info}} 868 +Downlink Command: 0x21 1100 1100 1101 1101 Format: Command Code (0x21) followed by 1 bytes level value. 1102 1102 1103 1103 If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21. 1104 1104 1105 -* **Example 1**: Downlink Payload:**2101**~/~/ set packet receiving response level to 11106 -* **Example 2**: Downlink Payload:**2102**~/~/ set packet receiving response level to 2874 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1 875 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2 1107 1107 1108 1108 = 8. AT Commands Combination = 1109 1109 1110 1110 == 8.1 Set a fix RX2DR for downlink window == 1111 1111 1112 -* **AT+ADR=0**~-~-> Disable ADR first1113 -* **AT+RX2DR=xxxx**~-~-> Set xxxx to your wanted DataRate881 +* AT+ADR=0 ~-~-> Disable ADR first 882 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate 1114 1114 1115 1115 == 8.2 Use Downlink Command to set a fix uplink DR == 1116 1116 1117 -{{info}} 1118 -**Downlink Command: 0x22000500** 1119 -{{/info}} 886 +Downlink Command: 0x22000500 1120 1120 1121 1121 Same as: 1122 1122 1123 -* AT+ADR=0 ||anchor="H7.1AdaptiveDataRate"]]1124 -* AT+DR=5 ||anchor="H7.4DataRate"]]1125 -* AT+TXP=0 ||anchor="H7.14TransmitPower"]]890 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]] 891 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]] 892 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
- image-20220511120050-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -136.3 KB - Content
- image-20220526162535-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -149.4 KB - Content