Last modified by kai on 2024/09/06 10:00
<
From version < 38.91 >
edited by Xiaoling
on 2022/05/31 09:21
To version < 50.5 >
edited by Xiaoling
on 2022/07/13 12:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 - **Contents：**
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
... ... @@ -6,6 +6,7 @@
6 6  
7 7  = 1. Introduction =
8 8  
9 +
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
10 10  
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
... ... @@ -18,6 +18,7 @@
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
22 +
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 23  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
... ... @@ -25,8 +25,10 @@
25 25  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
26 26  
27 27  
30 +
28 28  = 3. Support End Node and firmware version =
29 29  
33 +
30 30  (% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
31 31  |=(% colspan="3" style="width: 963px;" %)(((
32 32  Dragino STM32 base hardware Firmware / LoRaWAN stack list
... ... @@ -102,14 +102,13 @@
102 102  
103 103  = 4. System Management Commands =
104 104  
109 +
105 105  == 4.1 Change Uplink Interval ==
106 106  
112 +
107 107  Feature: Change LoRaWAN End Node Transmit Interval.
108 108  
109 -(% class="box infomessage" %)
110 -(((
111 -**AT Command: AT+TDC**
112 -)))
115 +(% style="color:blue" %)**AT Command: AT+TDC**
113 113  
114 114  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
115 115  |=(% colspan="3" style="width: 724px;" %)AT+TDC
... ... @@ -123,11 +123,11 @@
123 123  Set transmit interval to 60000ms = 60 seconds
124 124  )))
125 125  
126 -{{info}}
127 -**Downlink Command: 0x01**
128 -{{/info}}
129 -
130 130  (((
130 +
131 +
132 +(% style="color:blue" %)**Downlink Command: 0x01**
133 +
131 131  Format: Command Code (0x01) followed by 3 bytes time value.
132 132  )))
133 133  
... ... @@ -142,12 +142,13 @@
142 142  
143 143  == 4.2 Reboot End Node ==
144 144  
148 +
145 145  Feature: Reboot End Node to perform a new OTAA or ABP Join.
146 146  
147 -{{info}}
148 -**AT Command: ATZ**
149 -{{/info}}
150 150  
152 +(% style="color:blue" %)**AT Command: ATZ**
153 +
154 +
151 151  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
152 152  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
153 153  |**Command Example**|**Function**|**Response**
... ... @@ -165,10 +165,10 @@
165 165  <followed by the Tx and Rx information>
166 166  )))
167 167  
168 -{{info}}
169 -**Downlink Command: 0x04**
170 -{{/info}}
171 171  
173 +(% style="color:blue" %)**Downlink Command: 0x04**
174 +
175 +
172 172  (((
173 173  Format: Command Code (0x04) followed by FF.
174 174  )))
... ... @@ -181,11 +181,10 @@
181 181  
182 182  == 4.3 Reset to factory Default ==
183 183  
188 +
184 184  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
185 185  
186 -{{info}}
187 -**AT Command: AT+FDR**
188 -{{/info}}
191 +(% style="color:blue" %)**AT Command: AT+FDR**
189 189  
190 190  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
191 191  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
... ... @@ -204,10 +204,10 @@
204 204  Please set the parameters or reset Device to apply change
205 205  )))
206 206  
207 -{{info}}
208 -**Downlink Command: 0x04**
209 -{{/info}}
210 210  
211 +(% style="color:blue" %)**Downlink Command: 0x04**
212 +
213 +
211 211  (((
212 212  Format: Command Code (0x04) followed by FE.
213 213  )))
... ... @@ -221,10 +221,10 @@
221 221  
222 222  Feature: Show firmware version. No downlink command yet.
223 223  
224 -{{info}}
225 -**AT Command: AT+VER**
226 -{{/info}}
227 227  
228 +(% style="color:blue" %)**AT Command: AT+VER**
229 +
230 +
228 228  (% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
229 229  |=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
230 230  |(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -234,10 +234,10 @@
234 234  OK
235 235  )))
236 236  
237 -{{info}}
238 -**Downlink Command: 0x26 (Valid in 006 stack)**
239 -{{/info}}
240 240  
241 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
242 +
243 +
241 241  (((
242 242  Downlink Format: 0x26
243 243  )))
... ... @@ -280,10 +280,10 @@
280 280  
281 281  Feature: Show All configure. No downlink command yet.
282 282  
283 -{{info}}
284 -**AT Command: AT+CFG**
285 -{{/info}}
286 286  
287 +(% style="color:blue" %)**AT Command: AT+CFG**
288 +
289 +
287 287  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
288 288  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
289 289  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -301,8 +301,6 @@
301 301  OK
302 302  )))
303 303  
304 -
305 -
306 306  = 5. Keys, IDs and EUIs management =
307 307  
308 308  == 5.1 Application EUI ==
... ... @@ -309,10 +309,10 @@
309 309  
310 310  Feature: Get or Set the Application EUI.
311 311  
312 -{{info}}
313 -**AT Command: AT+APPEUI**
314 -{{/info}}
315 315  
314 +(% style="color:blue" %)**AT Command: AT+APPEUI**
315 +
316 +
316 316  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
317 317  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
318 318  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -321,16 +321,14 @@
321 321  )))
322 322  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
323 323  
324 -
325 -
326 326  == 5.2 Application Key ==
327 327  
328 328  Feature: Get or Set the Application Key.
329 329  
330 -{{info}}
331 -**AT Command: AT+APPKEY**
332 -{{/info}}
333 333  
330 +(% style="color:blue" %)**AT Command: AT+APPKEY**
331 +
332 +
334 334  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
335 335  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
336 336  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -339,15 +339,14 @@
339 339  )))
340 340  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
341 341  
342 -
343 343  == 5.3 Application Session Key ==
344 344  
345 345  Feature: Get or Set the Application Session Key.
346 346  
347 -{{info}}
348 -**AT Command: AT+APPSKEY**
349 -{{/info}}
350 350  
346 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
347 +
348 +
351 351  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
352 352  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
353 353  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -358,15 +358,14 @@
358 358  OK
359 359  )))
360 360  
361 -
362 362  == 5.4 Device Address ==
363 363  
364 364  Feature: Get or Set the Device Address.
365 365  
366 -{{info}}
367 -**AT Command: AT+DADDR**
368 -{{/info}}
369 369  
364 +(% style="color:blue" %)**AT Command: AT+DADDR**
365 +
366 +
370 370  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
371 371  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
372 372  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -377,15 +377,14 @@
377 377  )))
378 378  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
379 379  
380 -
381 381  == 5.5 Device EUI ==
382 382  
383 383  Feature: Get or Set the Device EUI.
384 384  
385 -{{info}}
386 -**AT Command: AT+DEUI**
387 -{{/info}}
388 388  
382 +(% style="color:blue" %)**AT Command: AT+DEUI**
383 +
384 +
389 389  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
390 390  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
391 391  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -396,15 +396,14 @@
396 396  OK
397 397  )))
398 398  
399 -
400 400  == 5.6 Network ID ==
401 401  
402 402  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
403 403  
404 -{{info}}
405 -**AT Command: AT+NWKID**
406 -{{/info}}
407 407  
400 +(% style="color:blue" %)**AT Command: AT+NWKID**
401 +
402 +
408 408  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
409 409  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
410 410  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -413,15 +413,14 @@
413 413  )))
414 414  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
415 415  
416 -
417 417  == 5.7 Network Session Key ==
418 418  
419 419  Feature: Get or Set the Network Session Key
420 420  
421 -{{info}}
422 -**AT Command: AT+NWKSKEY**
423 -{{/info}}
424 424  
416 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
417 +
418 +
425 425  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
426 426  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
427 427  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -430,17 +430,18 @@
430 430  )))
431 431  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
432 432  
433 -
434 434  = 6. Joining and sending date on LoRaWAN network =
435 435  
436 436  == 6.1 Confirm Mode ==
437 437  
431 +=== AT+CFM command before DR-LWS007 software stack ===
432 +
438 438  Feature: Get or Set the confirmation mode (0-1).
439 439  
440 -{{info}}
441 -**AT Command: AT+CFM**
442 -{{/info}}
443 443  
436 +(% style="color:blue" %)**AT Command: AT+CFM**
437 +
438 +
444 444  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
445 445  |=(% colspan="3" style="width: 707px;" %)AT+CFM
446 446  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -450,7 +450,7 @@
450 450  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
451 451  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
452 452  
453 -Downlink Command: 0x05
448 +(% style="color:blue" %)**Downlink Command: 0x05**
454 454  
455 455  Format: Command Code (0x05) followed by 2 bytes mode value.
456 456  
... ... @@ -459,15 +459,62 @@
459 459  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
460 460  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
461 461  
457 +=== AT+CFM command since DR-LWS007 software stack ===
462 462  
459 +
460 +(% style="color:blue" %)**AT Command: AT+CFM**
461 +
462 +
463 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
466 +|(% style="width:160px" %)(((
467 +AT+CFM=1,0,0
468 +
469 +value1
470 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
471 +1
472 +
473 +OK
474 +)))
475 +|(% style="width:160px" %)(((
476 +AT+CFM=0,?,0
477 +
478 +value2
479 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
480 +0~~7
481 +
482 +OK
483 +)))
484 +|(% style="width:160px" %)(((
485 +AT+CFM=0,0,1
486 +
487 +value3
488 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
489 +1
490 +
491 +OK
492 +)))
493 +
494 +
495 +(% style="color:blue" %)**Downlink Command: 0x05**
496 +
497 +
498 +Format: Command Code (0x05) followed by 2 bytes mode value.
499 +
500 +If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
501 +
502 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
503 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
504 +
463 463  == 6.2 Confirm Status ==
464 464  
465 465  Feature: Get confirmation status of the last AT+SEND (0-1).
466 466  
467 -{{info}}
468 -**AT Command: AT+CFS**
469 -{{/info}}
470 470  
510 +(% style="color:blue" %)**AT Command: AT+CFS**
511 +
512 +
471 471  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
472 472  |=(% colspan="3" style="width: 531px;" %)AT+CFS
473 473  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -475,15 +475,14 @@
475 475  OK
476 476  )))
477 477  
478 -
479 479  == 6.3 Join LoRa® Network ==
480 480  
481 481  Feature: Join network.
482 482  
483 -{{info}}
484 -**AT Command: AT+JOIN**
485 -{{/info}}
486 486  
525 +(% style="color:blue" %)**AT Command: AT+JOIN**
526 +
527 +
487 487  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
488 488  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
489 489  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -493,16 +493,14 @@
493 493  While Error in format, return AT_BUSY_ERROR
494 494  )))
495 495  
496 -
497 -
498 498  == 6.4 LoRa® Network Join Mode ==
499 499  
500 500  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
501 501  
502 -{{info}}
503 -**AT Command: AT+NJM**
504 -{{/info}}
505 505  
542 +(% style="color:blue" %)**AT Command: AT+NJM**
543 +
544 +
506 506  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
507 507  |=(% colspan="3" style="width: 750px;" %)AT+NJM
508 508  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -512,27 +512,25 @@
512 512  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
513 513  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
514 514  
515 -{{info}}
516 -**Downlink Command: 0x20**
517 -{{/info}}
518 518  
555 +(% style="color:blue" %)**Downlink Command: 0x20**
556 +
557 +
519 519  Format: Command Code (0x20) followed by 1 bytes mode value.
520 520  
521 521  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
522 522  
523 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
562 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
524 524  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
525 525  
526 -
527 -
528 528  == 6.5 LoRa® Network Join Status ==
529 529  
530 530  Feature: LoRa® Network Join Status.
531 531  
532 -{{info}}
533 -**AT Command: AT+NJS**
534 -{{/info}}
535 535  
570 +(% style="color:blue" %)**AT Command: AT+NJS**
571 +
572 +
536 536  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
537 537  |=(% colspan="3" style="width: 495px;" %)AT+NJS
538 538  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -540,16 +540,14 @@
540 540  OK
541 541  )))
542 542  
543 -
544 -
545 545  == 6.6 Print Last Received Data in Raw Format ==
546 546  
547 547  Feature: Print Last Received Data in Raw Format<port:data>.
548 548  
549 -{{info}}
550 -**AT Command: AT+RECV**
551 -{{/info}}
552 552  
585 +(% style="color:blue" %)**AT Command: AT+RECV**
586 +
587 +
553 553  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
554 554  |=(% colspan="3" style="width: 584px;" %)AT+RECV
555 555  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -557,16 +557,14 @@
557 557  OK
558 558  )))
559 559  
560 -
561 -
562 562  == 6.7 Print Last Received Data in Binary Format ==
563 563  
564 564  Feature: Print Last Received Data in Binary Format<port:data>.
565 565  
566 -{{info}}
567 -**AT Command: AT+RECVB**
568 -{{/info}}
569 569  
600 +(% style="color:blue" %)**AT Command: AT+RECVB**
601 +
602 +
570 570  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
571 571  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
572 572  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -574,16 +574,14 @@
574 574  OK
575 575  )))
576 576  
577 -
578 -
579 579  == 6.8 Send Text Data ==
580 580  
581 581  Feature: Send Text Data<port:data>.
582 582  
583 -{{info}}
584 -**AT Command: AT+SEND**
585 -{{/info}}
586 586  
615 +(% style="color:blue" %)**AT Command: AT+SEND**
616 +
617 +
587 587  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
588 588  |=(% colspan="3" style="width: 988px;" %)AT+SEND
589 589  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -595,16 +595,14 @@
595 595  
596 596  )))
597 597  
598 -
599 -
600 600  == 6.9 Send Hexadecimal Data ==
601 601  
602 602  Feature: Send hexadecimal data along with the application port.
603 603  
604 -{{info}}
605 -**AT Command: AT+SENDB**
606 -{{/info}}
607 607  
634 +(% style="color:blue" %)**AT Command: AT+SENDB**
635 +
636 +
608 608  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
609 609  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
610 610  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -615,8 +615,6 @@
615 615  
616 616  )))
617 617  
618 -
619 -
620 620  = 7. LoRaWAN network management =
621 621  
622 622  == 7.1 Adaptive Data Rate ==
... ... @@ -623,10 +623,10 @@
623 623  
624 624  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
625 625  
626 -{{info}}
627 -**AT Command: AT+ADR**
628 -{{/info}}
629 629  
654 +(% style="color:blue" %)**AT Command: AT+ADR**
655 +
656 +
630 630  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
631 631  |=(% colspan="3" style="width: 680px;" %)AT+ADR
632 632  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -638,26 +638,24 @@
638 638  AT_PARAM_ERROR
639 639  )))
640 640  
641 -{{info}}
642 -**Downlink Command: 0x22**
643 -{{/info}}
644 644  
669 +(% style="color:blue" %)**Downlink Command: 0x22**
645 645  
671 +
672 +
646 646  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
647 647  
648 648  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
649 649  * **Example 2**: Downlink Payload: **2200FFFF** ~/~/ Set AT+ADR=0.
650 650  
651 -
652 -
653 653  == 7.2 LoRa® Class ==
654 654  
655 655  Feature: Get or Set the Device Class(Currently only support class A, class C).
656 656  
657 -{{info}}
658 -**AT Command:AT+CLASS**
659 -{{/info}}
660 660  
683 +(% style="color:blue" %)**AT Command:AT+CLASS**
684 +
685 +
661 661  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
662 662  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
663 663  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -672,10 +672,10 @@
672 672  
673 673  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
674 674  
675 -{{info}}
676 -**AT Command:AT+DCS**
677 -{{/info}}
678 678  
701 +(% style="color:blue" %)**AT Command:AT+DCS**
702 +
703 +
679 679  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
680 680  |=(% colspan="3" style="width: 512px;" %)AT+DCS
681 681  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -690,10 +690,10 @@
690 690  
691 691  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
692 692  
693 -{{info}}
694 -**AT Command: AT+DR**
695 -{{/info}}
696 696  
719 +(% style="color:blue" %)**AT Command: AT+DR**
720 +
721 +
697 697  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
698 698  |=(% colspan="3" style="width: 463px;" %)AT+DR
699 699  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -704,11 +704,11 @@
704 704  
705 705  )))
706 706  
707 -{{info}}
708 -**Downlink Command: 0x2200aaFF**
709 -{{/info}}
710 710  
733 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
711 711  
735 +
736 +
712 712  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
713 713  
714 714  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
... ... @@ -718,10 +718,10 @@
718 718  
719 719  Feature: Get or Set the Frame Counter Downlink.
720 720  
721 -{{info}}
722 -**AT Command:AT+FCD**
723 -{{/info}}
724 724  
747 +(% style="color:blue" %)**AT Command:AT+FCD**
748 +
749 +
725 725  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
726 726  |=(% colspan="3" style="width: 690px;" %)AT+FCD
727 727  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -738,10 +738,10 @@
738 738  
739 739  Feature: Get or Set the Frame Counter Uplink.
740 740  
741 -{{info}}
742 -**AT Command:AT+FCU**
743 -{{/info}}
744 744  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
769 +
745 745  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
746 746  |=(% colspan="3" style="width: 531px;" %)AT+FCU
747 747  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -756,10 +756,10 @@
756 756  
757 757  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
758 758  
759 -{{info}}
760 -**AT Command:AT+JN1DL**
761 -{{/info}}
762 762  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
787 +
763 763  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
764 764  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
765 765  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -774,10 +774,10 @@
774 774  
775 775  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
776 776  
777 -{{info}}
778 -**AT Command:AT+JN2DL**
779 -{{/info}}
780 780  
803 +(% style="color:blue" %)**AT Command:AT+JN2DL**
804 +
805 +
781 781  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
782 782  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
783 783  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -790,12 +790,14 @@
790 790  
791 791  == 7.9 Public Network Mode ==
792 792  
793 -Feature: Get or Set the public network mode. (0: off, 1: on)
818 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
794 794  
795 -{{info}}
796 -**AT Command:AT+PNM**
797 -{{/info}}
820 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
798 798  
822 +
823 +(% style="color:blue" %)**AT Command:AT+PNM**
824 +
825 +
799 799  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
800 800  |=(% colspan="3" style="width: 664px;" %)AT+PNM
801 801  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -802,20 +802,25 @@
802 802  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
803 803  OK
804 804  )))
805 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
832 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
833 +Set the public network mode.
834 +
835 +Set syncword=0x34
836 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
806 806  OK
807 807  
808 808  
809 809  )))
841 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
810 810  
811 811  == 7.10 Receive Delay1 ==
812 812  
813 813  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
814 814  
815 -{{info}}
816 -**AT Command:AT+RX1DL**
817 -{{/info}}
818 818  
848 +(% style="color:blue" %)**AT Command:AT+RX1DL**
849 +
850 +
819 819  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
820 820  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
821 821  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -830,10 +830,10 @@
830 830  
831 831  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
832 832  
833 -{{info}}
834 -**AT Command:AT+RX2DL**
835 -{{/info}}
836 836  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
868 +
837 837  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
838 838  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
839 839  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -848,10 +848,10 @@
848 848  
849 849  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
850 850  
851 -{{info}}
852 -**AT Command:AT+RX2DR**
853 -{{/info}}
854 854  
884 +(% style="color:blue" %)**AT Command:AT+RX2DR**
885 +
886 +
855 855  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
856 856  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
857 857  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -866,10 +866,10 @@
866 866  
867 867  Feature: Get or Set the Rx2 window frequency
868 868  
869 -{{info}}
870 -**AT Command:AT+RX2FQ**
871 -{{/info}}
872 872  
902 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
903 +
904 +
873 873  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
874 874  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
875 875  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -884,10 +884,10 @@
884 884  
885 885  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
886 886  
887 -{{info}}
888 -**AT Command:AT+TXP**
889 -{{/info}}
890 890  
920 +(% style="color:blue" %)**AT Command:AT+TXP**
921 +
922 +
891 891  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
892 892  |=(% colspan="3" style="width: 462px;" %)AT+TXP
893 893  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -909,10 +909,10 @@
909 909  
910 910  Feature: Get or Set the Rx2 window frequency
911 911  
912 -{{info}}
913 -**AT Command:AT+RSSI**
914 -{{/info}}
915 915  
945 +(% style="color:blue" %)**AT Command:AT+RSSI**
946 +
947 +
916 916  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
917 917  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
918 918  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -1119,6 +1119,129 @@
1119 1119  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1120 1120  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1121 1121  
1154 +== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1155 +
1156 +{{info}}
1157 +**AT Command: AT+SETMAXNBTRANS **
1158 +{{/info}}
1159 +
1160 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1161 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1162 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1163 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1164 +OK
1165 +)))
1166 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1167 +1
1168 +
1169 +OK
1170 +)))
1171 +
1172 +{{info}}
1173 +**Downlink Command: 0x33**
1174 +{{/info}}
1175 +
1176 +Format: Command Code (0x33) followed by 2 bytes mode value.
1177 +
1178 +If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1179 +
1180 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1181 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1182 +
1183 +== 7.25 Device offline rejoining （LWS007) ==
1184 +
1185 +{{info}}
1186 +**AT Command: AT+DDETECT**
1187 +{{/info}}
1188 +
1189 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1190 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1191 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1192 +|(% style="width:160px" %)(((
1193 +AT+DDETECT=1,1440,2880
1194 +
1195 +value1
1196 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1197 +1
1198 +
1199 +OK
1200 +)))
1201 +|(% style="width:160px" %)(((
1202 +AT+DDETECT=1,?,2880
1203 +
1204 +value2
1205 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1206 +
1207 +
1208 +OK
1209 +)))
1210 +|(% style="width:160px" %)(((
1211 +AT+DDETECT=1,1440,？
1212 +
1213 +value3
1214 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1215 +
1216 +
1217 +OK
1218 +)))
1219 +
1220 +{{info}}
1221 +**Downlink Command: 0x33**
1222 +{{/info}}
1223 +
1224 +Format: Command Code (0x32) followed by 2 bytes mode value.
1225 +
1226 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1227 +
1228 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1229 +
1230 +== 7.26 Request the server to send an ACK ==
1231 +
1232 +{{info}}
1233 +**AT Command: AT+PNACKMD**
1234 +{{/info}}
1235 +
1236 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1237 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1238 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1239 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1240 +OK
1241 +)))
1242 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1243 +0
1244 +
1245 +OK
1246 +)))
1247 +
1248 +== 7.27 Adjust network rejoining interval ==
1249 +
1250 +{{info}}
1251 +**AT Command: AT+RJTDC**
1252 +{{/info}}
1253 +
1254 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1255 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1256 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1257 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1258 +OK
1259 +
1260 +the interval is 30000ms = 30s
1261 +)))
1262 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1264 +)))
1265 +
1266 +{{info}}
1267 +**Downlink Command: 0x26**
1268 +{{/info}}
1269 +
1270 +Format: Command Code (0x26) followed by 2 bytes mode value.
1271 +
1272 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1273 +
1274 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1276 +
1122 1122  = 8. AT Commands Combination =
1123 1123  
1124 1124  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1137,3 +1137,4 @@
1137 1137  * AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1138 1138  * AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1139 1139  * AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1295 +~)~)~)

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0