Last modified by kai on 2024/09/06 10:00
<
From version < 38.90 >
edited by Xiaoling
on 2022/05/31 09:21
To version < 11.1 >
edited by Xiaoling
on 2022/05/11 11:51
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,8 @@
1 - **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
... ... @@ -11,95 +11,34 @@
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
12 12  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13 13  
14 -(((
15 15  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
16 16  
17 -)))
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
26 26  
27 -
28 28  = 3. Support End Node and firmware version =
29 29  
30 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
31 -|=(% colspan="3" style="width: 963px;" %)(((
32 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
33 -)))
34 -|(% style="width:187px" %)(((
35 -**Model**
36 -)))|(% style="width:330px" %)(((
37 -**Description**
38 -)))|(% style="width:445px" %)(((
39 -**Firmware Version <~-~-> Stack Version**
40 -)))
41 -|(% style="width:187px" %)(((
42 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
43 -)))|(% style="width:330px" %)(((
44 -Open Source Generic LoRaWAN Sensor Node
45 -)))|(% style="width:445px" %)(((
46 -(((
47 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
48 -)))
49 -
50 -(((
51 -(((
26 +(% border="1" style="background-color:#ffffcc; border:1; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
52 52  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
53 53  )))
54 -)))
55 -)))
56 -|(% style="width:187px" %)(((
57 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
58 -)))|(% style="width:330px" %)(((
59 -LoRaWAN GPS Tracker
60 -)))|(% style="width:445px" %)(((
61 -(((
62 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
63 -)))
64 -
65 -(((
66 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
67 67  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
68 68  )))
69 -)))
70 -)))
71 -|(% style="width:187px" %)(((
72 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
73 -)))|(% style="width:330px" %)(((
74 -LoRaWAN BLE Indoor Tracker
75 -)))|(% style="width:445px" %)(((
76 -LBT1 v1.0 <~-~-> DR-LWS-005;
77 -)))
78 -|(% style="width:187px" %)(((
79 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
80 -)))|(% style="width:330px" %)(((
81 -LoRaWAN RS485 Modbus Converter
82 -)))|(% style="width:445px" %)(((
83 -RS485-LN v1.3 <~-~-> DR-LWS-005;
84 -)))
85 -|(% style="width:187px" %)(((
86 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
87 -)))|(% style="width:330px" %)(((
88 -LoRaWAN Temperature & Humidity Sensor
89 -)))|(% style="width:445px" %)(((
90 -(((
91 -LHT65 v1.7 <~-~-> DR-LWS-003;
92 -)))
93 -
94 -(((
95 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
96 96  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
97 97  )))
98 -)))
99 -)))
100 100  
101 -
102 -
103 103  = 4. System Management Commands =
104 104  
105 105  == 4.1 Change Uplink Interval ==
... ... @@ -111,7 +111,7 @@
111 111  **AT Command: AT+TDC**
112 112  )))
113 113  
114 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %)
115 115  |=(% colspan="3" style="width: 724px;" %)AT+TDC
116 116  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
117 117  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
... ... @@ -127,19 +127,13 @@
127 127  **Downlink Command: 0x01**
128 128  {{/info}}
129 129  
130 -(((
131 131  Format: Command Code (0x01) followed by 3 bytes time value.
132 -)))
133 133  
134 -(((
135 135  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
136 -)))
137 137  
138 138  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
139 139  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
140 140  
141 -
142 -
143 143  == 4.2 Reboot End Node ==
144 144  
145 145  Feature: Reboot End Node to perform a new OTAA or ABP Join.
... ... @@ -148,7 +148,7 @@
148 148  **AT Command: ATZ**
149 149  {{/info}}
150 150  
151 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
152 152  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
153 153  |**Command Example**|**Function**|**Response**
154 154  |ATZ|Reset MCU|(((
... ... @@ -169,16 +169,10 @@
169 169  **Downlink Command: 0x04**
170 170  {{/info}}
171 171  
172 -(((
173 173  Format: Command Code (0x04) followed by FF.
174 -)))
175 175  
176 -(((
177 177  If the downlink payload=**04FF**, the end node will reboot.
178 178  
179 -
180 -)))
181 -
182 182  == 4.3 Reset to factory Default ==
183 183  
184 184  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
... ... @@ -187,7 +187,7 @@
187 187  **AT Command: AT+FDR**
188 188  {{/info}}
189 189  
190 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
191 191  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
192 192  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
193 193  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -208,13 +208,9 @@
208 208  **Downlink Command: 0x04**
209 209  {{/info}}
210 210  
211 -(((
212 212  Format: Command Code (0x04) followed by FE.
213 -)))
214 214  
215 -(((
216 216  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
217 -)))
218 218  
219 219  
220 220  == 4.4 Show Firmware Version ==
... ... @@ -225,10 +225,10 @@
225 225  **AT Command: AT+VER**
226 226  {{/info}}
227 227  
228 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
229 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
230 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
231 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
232 232  1.3 EU868
233 233  
234 234  OK
... ... @@ -238,25 +238,17 @@
238 238  **Downlink Command: 0x26 (Valid in 006 stack)**
239 239  {{/info}}
240 240  
241 -(((
242 242  Downlink Format: 0x26
243 -)))
244 244  
245 -(((
246 246  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
247 -)))
248 248  
249 -(((
250 250  **xx: Software Type:**
251 -)))
252 252  
253 253  * 0x00 01: LGT92 Version
254 254  * 0x00 02: LBT1
255 255  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
256 256  
257 -(((
258 258  **yy: Frequency Band:**
259 -)))
260 260  
261 261  * 0x01: EU868
262 262  * 0x02: US915
... ... @@ -269,9 +269,7 @@
269 269  * 0x09: AS923-2
270 270  * 0xa0: AS923-3
271 271  
272 -(((
273 273  **zz: Subband**
274 -)))
275 275  
276 276  firmware version: v1.1.0 ~-~-> 110
277 277  
... ... @@ -284,7 +284,7 @@
284 284  **AT Command: AT+CFG**
285 285  {{/info}}
286 286  
287 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
288 288  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
289 289  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
290 290  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -301,8 +301,6 @@
301 301  OK
302 302  )))
303 303  
304 -
305 -
306 306  = 5. Keys, IDs and EUIs management =
307 307  
308 308  == 5.1 Application EUI ==
... ... @@ -313,7 +313,7 @@
313 313  **AT Command: AT+APPEUI**
314 314  {{/info}}
315 315  
316 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
317 317  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
318 318  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
319 319  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -321,8 +321,6 @@
321 321  )))
322 322  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
323 323  
324 -
325 -
326 326  == 5.2 Application Key ==
327 327  
328 328  Feature: Get or Set the Application Key.
... ... @@ -331,7 +331,7 @@
331 331  **AT Command: AT+APPKEY**
332 332  {{/info}}
333 333  
334 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
335 335  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
336 336  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
337 337  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -339,7 +339,6 @@
339 339  )))
340 340  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
341 341  
342 -
343 343  == 5.3 Application Session Key ==
344 344  
345 345  Feature: Get or Set the Application Session Key.
... ... @@ -348,7 +348,7 @@
348 348  **AT Command: AT+APPSKEY**
349 349  {{/info}}
350 350  
351 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
352 352  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
353 353  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
354 354  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -358,7 +358,6 @@
358 358  OK
359 359  )))
360 360  
361 -
362 362  == 5.4 Device Address ==
363 363  
364 364  Feature: Get or Set the Device Address.
... ... @@ -367,7 +367,7 @@
367 367  **AT Command: AT+DADDR**
368 368  {{/info}}
369 369  
370 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
371 371  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
372 372  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
373 373  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -377,7 +377,6 @@
377 377  )))
378 378  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
379 379  
380 -
381 381  == 5.5 Device EUI ==
382 382  
383 383  Feature: Get or Set the Device EUI.
... ... @@ -386,7 +386,7 @@
386 386  **AT Command: AT+DEUI**
387 387  {{/info}}
388 388  
389 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
390 390  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
391 391  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
392 392  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -396,7 +396,6 @@
396 396  OK
397 397  )))
398 398  
399 -
400 400  == 5.6 Network ID ==
401 401  
402 402  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
... ... @@ -405,7 +405,7 @@
405 405  **AT Command: AT+NWKID**
406 406  {{/info}}
407 407  
408 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
409 409  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
410 410  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
411 411  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -413,7 +413,6 @@
413 413  )))
414 414  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
415 415  
416 -
417 417  == 5.7 Network Session Key ==
418 418  
419 419  Feature: Get or Set the Network Session Key
... ... @@ -422,7 +422,7 @@
422 422  **AT Command: AT+NWKSKEY**
423 423  {{/info}}
424 424  
425 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
426 426  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
427 427  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
428 428  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -430,7 +430,6 @@
430 430  )))
431 431  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
432 432  
433 -
434 434  = 6. Joining and sending date on LoRaWAN network =
435 435  
436 436  == 6.1 Confirm Mode ==
... ... @@ -441,7 +441,7 @@
441 441  **AT Command: AT+CFM**
442 442  {{/info}}
443 443  
444 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
445 445  |=(% colspan="3" style="width: 707px;" %)AT+CFM
446 446  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
447 447  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -459,7 +459,6 @@
459 459  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
460 460  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
461 461  
462 -
463 463  == 6.2 Confirm Status ==
464 464  
465 465  Feature: Get confirmation status of the last AT+SEND (0-1).
... ... @@ -468,7 +468,7 @@
468 468  **AT Command: AT+CFS**
469 469  {{/info}}
470 470  
471 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
472 472  |=(% colspan="3" style="width: 531px;" %)AT+CFS
473 473  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
474 474  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
... ... @@ -475,7 +475,6 @@
475 475  OK
476 476  )))
477 477  
478 -
479 479  == 6.3 Join LoRa® Network ==
480 480  
481 481  Feature: Join network.
... ... @@ -484,7 +484,7 @@
484 484  **AT Command: AT+JOIN**
485 485  {{/info}}
486 486  
487 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
488 488  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
489 489  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
490 490  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
... ... @@ -493,8 +493,6 @@
493 493  While Error in format, return AT_BUSY_ERROR
494 494  )))
495 495  
496 -
497 -
498 498  == 6.4 LoRa® Network Join Mode ==
499 499  
500 500  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
... ... @@ -503,7 +503,7 @@
503 503  **AT Command: AT+NJM**
504 504  {{/info}}
505 505  
506 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
507 507  |=(% colspan="3" style="width: 750px;" %)AT+NJM
508 508  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
509 509  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
... ... @@ -523,8 +523,6 @@
523 523  * **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
524 524  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
525 525  
526 -
527 -
528 528  == 6.5 LoRa® Network Join Status ==
529 529  
530 530  Feature: LoRa® Network Join Status.
... ... @@ -533,7 +533,7 @@
533 533  **AT Command: AT+NJS**
534 534  {{/info}}
535 535  
536 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
537 537  |=(% colspan="3" style="width: 495px;" %)AT+NJS
538 538  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
539 539  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
... ... @@ -540,8 +540,6 @@
540 540  OK
541 541  )))
542 542  
543 -
544 -
545 545  == 6.6 Print Last Received Data in Raw Format ==
546 546  
547 547  Feature: Print Last Received Data in Raw Format<port:data>.
... ... @@ -550,7 +550,7 @@
550 550  **AT Command: AT+RECV**
551 551  {{/info}}
552 552  
553 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
554 554  |=(% colspan="3" style="width: 584px;" %)AT+RECV
555 555  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
556 556  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
... ... @@ -557,8 +557,6 @@
557 557  OK
558 558  )))
559 559  
560 -
561 -
562 562  == 6.7 Print Last Received Data in Binary Format ==
563 563  
564 564  Feature: Print Last Received Data in Binary Format<port:data>.
... ... @@ -567,7 +567,7 @@
567 567  **AT Command: AT+RECVB**
568 568  {{/info}}
569 569  
570 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
571 571  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
572 572  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
573 573  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
... ... @@ -574,8 +574,6 @@
574 574  OK
575 575  )))
576 576  
577 -
578 -
579 579  == 6.8 Send Text Data ==
580 580  
581 581  Feature: Send Text Data<port:data>.
... ... @@ -584,7 +584,7 @@
584 584  **AT Command: AT+SEND**
585 585  {{/info}}
586 586  
587 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
588 588  |=(% colspan="3" style="width: 988px;" %)AT+SEND
589 589  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
590 590  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
... ... @@ -595,8 +595,6 @@
595 595  
596 596  )))
597 597  
598 -
599 -
600 600  == 6.9 Send Hexadecimal Data ==
601 601  
602 602  Feature: Send hexadecimal data along with the application port.
... ... @@ -605,7 +605,7 @@
605 605  **AT Command: AT+SENDB**
606 606  {{/info}}
607 607  
608 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
609 609  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
610 610  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
611 611  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
... ... @@ -615,8 +615,6 @@
615 615  
616 616  )))
617 617  
618 -
619 -
620 620  = 7. LoRaWAN network management =
621 621  
622 622  == 7.1 Adaptive Data Rate ==
... ... @@ -627,7 +627,7 @@
627 627  **AT Command: AT+ADR**
628 628  {{/info}}
629 629  
630 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
631 631  |=(% colspan="3" style="width: 680px;" %)AT+ADR
632 632  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
633 633  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
... ... @@ -656,7 +656,7 @@
656 656  **AT Command:AT+CLASS**
657 657  {{/info}}
658 658  
659 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
660 660  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
661 661  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
662 662  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
... ... @@ -674,7 +674,7 @@
674 674  **AT Command:AT+DCS**
675 675  {{/info}}
676 676  
677 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
678 678  |=(% colspan="3" style="width: 512px;" %)AT+DCS
679 679  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
680 680  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
... ... @@ -692,7 +692,7 @@
692 692  **AT Command: AT+DR**
693 693  {{/info}}
694 694  
695 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
696 696  |=(% colspan="3" style="width: 463px;" %)AT+DR
697 697  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
698 698  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
... ... @@ -720,7 +720,7 @@
720 720  **AT Command:AT+FCD**
721 721  {{/info}}
722 722  
723 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
724 724  |=(% colspan="3" style="width: 690px;" %)AT+FCD
725 725  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
726 726  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
... ... @@ -740,7 +740,7 @@
740 740  **AT Command:AT+FCU**
741 741  {{/info}}
742 742  
743 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
744 744  |=(% colspan="3" style="width: 531px;" %)AT+FCU
745 745  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
746 746  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
... ... @@ -758,7 +758,7 @@
758 758  **AT Command:AT+JN1DL**
759 759  {{/info}}
760 760  
761 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
762 762  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
763 763  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
764 764  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
... ... @@ -776,7 +776,7 @@
776 776  **AT Command:AT+JN2DL**
777 777  {{/info}}
778 778  
779 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
780 780  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
781 781  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
782 782  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
... ... @@ -794,7 +794,7 @@
794 794  **AT Command:AT+PNM**
795 795  {{/info}}
796 796  
797 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
798 798  |=(% colspan="3" style="width: 664px;" %)AT+PNM
799 799  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
800 800  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
... ... @@ -814,7 +814,7 @@
814 814  **AT Command:AT+RX1DL**
815 815  {{/info}}
816 816  
817 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
818 818  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
819 819  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
820 820  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
... ... @@ -824,7 +824,7 @@
824 824  
825 825  )))
826 826  
827 -== 7.11 Receive Delay2 ==
713 +== 7.11Receive Delay2 ==
828 828  
829 829  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
830 830  
... ... @@ -832,7 +832,7 @@
832 832  **AT Command:AT+RX2DL**
833 833  {{/info}}
834 834  
835 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
721 +(% style="background-color:#ffffcc; color:green; width:481.222px" %)
836 836  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
837 837  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
838 838  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
... ... @@ -850,7 +850,7 @@
850 850  **AT Command:AT+RX2DR**
851 851  {{/info}}
852 852  
853 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
739 +(% style="background-color:#ffffcc; color:green; width:525.222px" %)
854 854  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
855 855  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
856 856  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
... ... @@ -868,7 +868,7 @@
868 868  **AT Command:AT+RX2FQ**
869 869  {{/info}}
870 870  
871 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
757 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
872 872  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
873 873  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
874 874  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
... ... @@ -886,7 +886,7 @@
886 886  **AT Command:AT+TXP**
887 887  {{/info}}
888 888  
889 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
775 +(% style="background-color:#ffffcc; color:green; width:465.222px" %)
890 890  |=(% colspan="3" style="width: 462px;" %)AT+TXP
891 891  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
892 892  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
... ... @@ -911,7 +911,7 @@
911 911  **AT Command:AT+RSSI**
912 912  {{/info}}
913 913  
914 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
800 +(% style="background-color:#ffffcc; color:green; width:557.222px" %)
915 915  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
916 916  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
917 917  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
... ... @@ -926,7 +926,7 @@
926 926  **AT Command:AT+SNR**
927 927  {{/info}}
928 928  
929 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
815 +(% style="background-color:#ffffcc; color:green; width:571.222px" %)
930 930  |=(% colspan="3" style="width: 568px;" %)AT+SNR
931 931  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
932 932  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
... ... @@ -941,7 +941,7 @@
941 941  **AT Command: AT+PORT**
942 942  {{/info}}
943 943  
944 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
830 +(% style="background-color:#ffffcc; color:green; width:500.222px" %)
945 945  |=(% colspan="3" style="width: 497px;" %)AT+PORT
946 946  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
947 947  |(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
... ... @@ -968,7 +968,7 @@
968 968  **AT Command: AT+CHS**
969 969  {{/info}}
970 970  
971 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
857 +(% style="background-color:#ffffcc; color:green; width:603.222px" %)
972 972  |=(% colspan="3" style="width: 600px;" %)AT+CHS
973 973  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
974 974  |(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
... ... @@ -984,7 +984,7 @@
984 984  **AT Command: AT+CHE**
985 985  {{/info}}
986 986  
987 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
873 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
988 988  |=(% colspan="3" style="width: 707px;" %)AT+CHE
989 989  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
990 990  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
... ... @@ -1013,7 +1013,7 @@
1013 1013  **AT Command: AT+RX1WTO**
1014 1014  {{/info}}
1015 1015  
1016 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
902 +(% style="background-color:#ffffcc; color:green; width:460.222px" %)
1017 1017  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1018 1018  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1019 1019  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
... ... @@ -1021,18 +1021,12 @@
1021 1021  )))
1022 1022  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1023 1023  
1024 -(((
1025 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1026 -)))
910 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1027 1027  
1028 -[[image:image-20220526162535-1.png]]
912 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1029 1029  
1030 -(((
1031 1031  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1032 1032  
1033 -
1034 -)))
1035 -
1036 1036  == 7.21 Get or Set RXwindows2 timeout ==
1037 1037  
1038 1038  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
... ... @@ -1041,7 +1041,7 @@
1041 1041  **AT Command: AT+RX2WTO**
1042 1042  {{/info}}
1043 1043  
1044 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
924 +(% style="background-color:#ffffcc; color:green; width:497.222px" %)
1045 1045  |=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1046 1046  |(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1047 1047  |(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
... ... @@ -1057,7 +1057,7 @@
1057 1057  **AT Command: AT+DWELLT**
1058 1058  {{/info}}
1059 1059  
1060 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
940 +(% style="background-color:#ffffcc; color:green; width:497.222px" %)
1061 1061  |=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1062 1062  |(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1063 1063  |(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
... ... @@ -1098,7 +1098,7 @@
1098 1098  **AT Command: AT+RPL**
1099 1099  {{/info}}
1100 1100  
1101 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
981 +(% style="background-color:#ffffcc; color:green; width:536.222px" %)
1102 1102  |=(% colspan="3" style="width: 533px;" %)AT+RPL
1103 1103  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1104 1104  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
... ... @@ -1132,6 +1132,6 @@
1132 1132  
1133 1133  Same as:
1134 1134  
1135 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1136 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1137 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1015 +* AT+ADR=0 [[Reference>>http://8.211.40.43:8080/xwiki/bin/view/End%20Device%20AT%20Commands%20and%20Downlink%20Command/#Adaptive_Data_Rate]]
1016 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
1017 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220511120050-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -136.3 KB
Content
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2022 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0