Last modified by kai on 2024/09/06 10:00
<
From version < 38.87 >
edited by Xiaoling
on 2022/05/31 09:20
To version < 8.1 >
edited by Xiaoling
on 2022/05/11 11:47
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,8 @@
1 - **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
... ... @@ -11,95 +11,34 @@
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
12 12  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13 13  
14 -(((
15 15  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
16 16  
17 -)))
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
26 26  
27 -
28 28  = 3. Support End Node and firmware version =
29 29  
30 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
31 -|=(% colspan="3" style="width: 963px;" %)(((
32 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
33 -)))
34 -|(% style="width:187px" %)(((
35 -**Model**
36 -)))|(% style="width:330px" %)(((
37 -**Description**
38 -)))|(% style="width:445px" %)(((
39 -**Firmware Version <~-~-> Stack Version**
40 -)))
41 -|(% style="width:187px" %)(((
42 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
43 -)))|(% style="width:330px" %)(((
44 -Open Source Generic LoRaWAN Sensor Node
45 -)))|(% style="width:445px" %)(((
46 -(((
47 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
48 -)))
49 -
50 -(((
51 -(((
26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
52 52  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
53 53  )))
54 -)))
55 -)))
56 -|(% style="width:187px" %)(((
57 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
58 -)))|(% style="width:330px" %)(((
59 -LoRaWAN GPS Tracker
60 -)))|(% style="width:445px" %)(((
61 -(((
62 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
63 -)))
64 -
65 -(((
66 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
67 67  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
68 68  )))
69 -)))
70 -)))
71 -|(% style="width:187px" %)(((
72 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
73 -)))|(% style="width:330px" %)(((
74 -LoRaWAN BLE Indoor Tracker
75 -)))|(% style="width:445px" %)(((
76 -LBT1 v1.0 <~-~-> DR-LWS-005;
77 -)))
78 -|(% style="width:187px" %)(((
79 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
80 -)))|(% style="width:330px" %)(((
81 -LoRaWAN RS485 Modbus Converter
82 -)))|(% style="width:445px" %)(((
83 -RS485-LN v1.3 <~-~-> DR-LWS-005;
84 -)))
85 -|(% style="width:187px" %)(((
86 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
87 -)))|(% style="width:330px" %)(((
88 -LoRaWAN Temperature & Humidity Sensor
89 -)))|(% style="width:445px" %)(((
90 -(((
91 -LHT65 v1.7 <~-~-> DR-LWS-003;
92 -)))
93 -
94 -(((
95 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
96 96  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
97 97  )))
98 -)))
99 -)))
100 100  
101 -
102 -
103 103  = 4. System Management Commands =
104 104  
105 105  == 4.1 Change Uplink Interval ==
... ... @@ -111,7 +111,7 @@
111 111  **AT Command: AT+TDC**
112 112  )))
113 113  
114 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %)
115 115  |=(% colspan="3" style="width: 724px;" %)AT+TDC
116 116  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
117 117  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
... ... @@ -127,19 +127,13 @@
127 127  **Downlink Command: 0x01**
128 128  {{/info}}
129 129  
130 -(((
131 131  Format: Command Code (0x01) followed by 3 bytes time value.
132 -)))
133 133  
134 -(((
135 135  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
136 -)))
137 137  
138 138  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
139 139  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
140 140  
141 -
142 -
143 143  == 4.2 Reboot End Node ==
144 144  
145 145  Feature: Reboot End Node to perform a new OTAA or ABP Join.
... ... @@ -148,7 +148,7 @@
148 148  **AT Command: ATZ**
149 149  {{/info}}
150 150  
151 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
152 152  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
153 153  |**Command Example**|**Function**|**Response**
154 154  |ATZ|Reset MCU|(((
... ... @@ -169,16 +169,10 @@
169 169  **Downlink Command: 0x04**
170 170  {{/info}}
171 171  
172 -(((
173 173  Format: Command Code (0x04) followed by FF.
174 -)))
175 175  
176 -(((
177 177  If the downlink payload=**04FF**, the end node will reboot.
178 178  
179 -
180 -)))
181 -
182 182  == 4.3 Reset to factory Default ==
183 183  
184 184  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
... ... @@ -187,7 +187,7 @@
187 187  **AT Command: AT+FDR**
188 188  {{/info}}
189 189  
190 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
191 191  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
192 192  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
193 193  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -208,13 +208,9 @@
208 208  **Downlink Command: 0x04**
209 209  {{/info}}
210 210  
211 -(((
212 212  Format: Command Code (0x04) followed by FE.
213 -)))
214 214  
215 -(((
216 216  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
217 -)))
218 218  
219 219  
220 220  == 4.4 Show Firmware Version ==
... ... @@ -225,10 +225,10 @@
225 225  **AT Command: AT+VER**
226 226  {{/info}}
227 227  
228 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
229 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
230 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
231 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
232 232  1.3 EU868
233 233  
234 234  OK
... ... @@ -238,25 +238,17 @@
238 238  **Downlink Command: 0x26 (Valid in 006 stack)**
239 239  {{/info}}
240 240  
241 -(((
242 242  Downlink Format: 0x26
243 -)))
244 244  
245 -(((
246 246  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
247 -)))
248 248  
249 -(((
250 250  **xx: Software Type:**
251 -)))
252 252  
253 253  * 0x00 01: LGT92 Version
254 254  * 0x00 02: LBT1
255 255  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
256 256  
257 -(((
258 258  **yy: Frequency Band:**
259 -)))
260 260  
261 261  * 0x01: EU868
262 262  * 0x02: US915
... ... @@ -269,9 +269,7 @@
269 269  * 0x09: AS923-2
270 270  * 0xa0: AS923-3
271 271  
272 -(((
273 273  **zz: Subband**
274 -)))
275 275  
276 276  firmware version: v1.1.0 ~-~-> 110
277 277  
... ... @@ -284,7 +284,7 @@
284 284  **AT Command: AT+CFG**
285 285  {{/info}}
286 286  
287 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
288 288  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
289 289  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
290 290  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -301,8 +301,6 @@
301 301  OK
302 302  )))
303 303  
304 -
305 -
306 306  = 5. Keys, IDs and EUIs management =
307 307  
308 308  == 5.1 Application EUI ==
... ... @@ -313,7 +313,7 @@
313 313  **AT Command: AT+APPEUI**
314 314  {{/info}}
315 315  
316 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
317 317  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
318 318  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
319 319  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -321,8 +321,6 @@
321 321  )))
322 322  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
323 323  
324 -
325 -
326 326  == 5.2 Application Key ==
327 327  
328 328  Feature: Get or Set the Application Key.
... ... @@ -331,7 +331,7 @@
331 331  **AT Command: AT+APPKEY**
332 332  {{/info}}
333 333  
334 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
335 335  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
336 336  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
337 337  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -339,7 +339,6 @@
339 339  )))
340 340  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
341 341  
342 -
343 343  == 5.3 Application Session Key ==
344 344  
345 345  Feature: Get or Set the Application Session Key.
... ... @@ -348,7 +348,7 @@
348 348  **AT Command: AT+APPSKEY**
349 349  {{/info}}
350 350  
351 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
352 352  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
353 353  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
354 354  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -358,7 +358,6 @@
358 358  OK
359 359  )))
360 360  
361 -
362 362  == 5.4 Device Address ==
363 363  
364 364  Feature: Get or Set the Device Address.
... ... @@ -367,7 +367,7 @@
367 367  **AT Command: AT+DADDR**
368 368  {{/info}}
369 369  
370 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
371 371  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
372 372  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
373 373  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -377,7 +377,6 @@
377 377  )))
378 378  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
379 379  
380 -
381 381  == 5.5 Device EUI ==
382 382  
383 383  Feature: Get or Set the Device EUI.
... ... @@ -386,7 +386,7 @@
386 386  **AT Command: AT+DEUI**
387 387  {{/info}}
388 388  
389 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
390 390  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
391 391  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
392 392  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -396,7 +396,6 @@
396 396  OK
397 397  )))
398 398  
399 -
400 400  == 5.6 Network ID ==
401 401  
402 402  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
... ... @@ -405,7 +405,7 @@
405 405  **AT Command: AT+NWKID**
406 406  {{/info}}
407 407  
408 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
409 409  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
410 410  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
411 411  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -413,7 +413,6 @@
413 413  )))
414 414  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
415 415  
416 -
417 417  == 5.7 Network Session Key ==
418 418  
419 419  Feature: Get or Set the Network Session Key
... ... @@ -422,7 +422,7 @@
422 422  **AT Command: AT+NWKSKEY**
423 423  {{/info}}
424 424  
425 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
426 426  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
427 427  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
428 428  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -430,7 +430,6 @@
430 430  )))
431 431  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
432 432  
433 -
434 434  = 6. Joining and sending date on LoRaWAN network =
435 435  
436 436  == 6.1 Confirm Mode ==
... ... @@ -441,7 +441,7 @@
441 441  **AT Command: AT+CFM**
442 442  {{/info}}
443 443  
444 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
445 445  |=(% colspan="3" style="width: 707px;" %)AT+CFM
446 446  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
447 447  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -459,7 +459,6 @@
459 459  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
460 460  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
461 461  
462 -
463 463  == 6.2 Confirm Status ==
464 464  
465 465  Feature: Get confirmation status of the last AT+SEND (0-1).
... ... @@ -468,7 +468,7 @@
468 468  **AT Command: AT+CFS**
469 469  {{/info}}
470 470  
471 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
472 472  |=(% colspan="3" style="width: 531px;" %)AT+CFS
473 473  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
474 474  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
... ... @@ -475,7 +475,6 @@
475 475  OK
476 476  )))
477 477  
478 -
479 479  == 6.3 Join LoRa® Network ==
480 480  
481 481  Feature: Join network.
... ... @@ -484,7 +484,7 @@
484 484  **AT Command: AT+JOIN**
485 485  {{/info}}
486 486  
487 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
488 488  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
489 489  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
490 490  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
... ... @@ -493,8 +493,6 @@
493 493  While Error in format, return AT_BUSY_ERROR
494 494  )))
495 495  
496 -
497 -
498 498  == 6.4 LoRa® Network Join Mode ==
499 499  
500 500  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
... ... @@ -503,7 +503,7 @@
503 503  **AT Command: AT+NJM**
504 504  {{/info}}
505 505  
506 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
507 507  |=(% colspan="3" style="width: 750px;" %)AT+NJM
508 508  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
509 509  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
... ... @@ -523,8 +523,6 @@
523 523  * **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
524 524  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
525 525  
526 -
527 -
528 528  == 6.5 LoRa® Network Join Status ==
529 529  
530 530  Feature: LoRa® Network Join Status.
... ... @@ -533,7 +533,7 @@
533 533  **AT Command: AT+NJS**
534 534  {{/info}}
535 535  
536 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
537 537  |=(% colspan="3" style="width: 495px;" %)AT+NJS
538 538  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
539 539  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
... ... @@ -540,8 +540,6 @@
540 540  OK
541 541  )))
542 542  
543 -
544 -
545 545  == 6.6 Print Last Received Data in Raw Format ==
546 546  
547 547  Feature: Print Last Received Data in Raw Format<port:data>.
... ... @@ -550,7 +550,7 @@
550 550  **AT Command: AT+RECV**
551 551  {{/info}}
552 552  
553 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
554 554  |=(% colspan="3" style="width: 584px;" %)AT+RECV
555 555  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
556 556  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
... ... @@ -557,8 +557,6 @@
557 557  OK
558 558  )))
559 559  
560 -
561 -
562 562  == 6.7 Print Last Received Data in Binary Format ==
563 563  
564 564  Feature: Print Last Received Data in Binary Format<port:data>.
... ... @@ -567,7 +567,7 @@
567 567  **AT Command: AT+RECVB**
568 568  {{/info}}
569 569  
570 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
571 571  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
572 572  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
573 573  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
... ... @@ -582,7 +582,7 @@
582 582  **AT Command: AT+SEND**
583 583  {{/info}}
584 584  
585 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
586 586  |=(% colspan="3" style="width: 988px;" %)AT+SEND
587 587  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
588 588  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
... ... @@ -601,7 +601,7 @@
601 601  **AT Command: AT+SENDB**
602 602  {{/info}}
603 603  
604 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
605 605  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
606 606  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
607 607  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
... ... @@ -621,7 +621,7 @@
621 621  **AT Command: AT+ADR**
622 622  {{/info}}
623 623  
624 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
625 625  |=(% colspan="3" style="width: 680px;" %)AT+ADR
626 626  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
627 627  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
... ... @@ -650,7 +650,7 @@
650 650  **AT Command:AT+CLASS**
651 651  {{/info}}
652 652  
653 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
654 654  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
655 655  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
656 656  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
... ... @@ -668,7 +668,7 @@
668 668  **AT Command:AT+DCS**
669 669  {{/info}}
670 670  
671 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
672 672  |=(% colspan="3" style="width: 512px;" %)AT+DCS
673 673  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
674 674  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
... ... @@ -686,7 +686,7 @@
686 686  **AT Command: AT+DR**
687 687  {{/info}}
688 688  
689 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
690 690  |=(% colspan="3" style="width: 463px;" %)AT+DR
691 691  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
692 692  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
... ... @@ -714,7 +714,7 @@
714 714  **AT Command:AT+FCD**
715 715  {{/info}}
716 716  
717 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
718 718  |=(% colspan="3" style="width: 690px;" %)AT+FCD
719 719  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
720 720  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
... ... @@ -734,7 +734,7 @@
734 734  **AT Command:AT+FCU**
735 735  {{/info}}
736 736  
737 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
738 738  |=(% colspan="3" style="width: 531px;" %)AT+FCU
739 739  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
740 740  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
... ... @@ -752,7 +752,7 @@
752 752  **AT Command:AT+JN1DL**
753 753  {{/info}}
754 754  
755 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
756 756  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
757 757  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
758 758  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
... ... @@ -770,7 +770,7 @@
770 770  **AT Command:AT+JN2DL**
771 771  {{/info}}
772 772  
773 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
774 774  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
775 775  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
776 776  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
... ... @@ -788,7 +788,7 @@
788 788  **AT Command:AT+PNM**
789 789  {{/info}}
790 790  
791 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
792 792  |=(% colspan="3" style="width: 664px;" %)AT+PNM
793 793  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
794 794  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
... ... @@ -808,7 +808,7 @@
808 808  **AT Command:AT+RX1DL**
809 809  {{/info}}
810 810  
811 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
812 812  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
813 813  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
814 814  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
... ... @@ -818,7 +818,7 @@
818 818  
819 819  )))
820 820  
821 -== 7.11 Receive Delay2 ==
713 +== 7.11Receive Delay2 ==
822 822  
823 823  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
824 824  
... ... @@ -826,7 +826,7 @@
826 826  **AT Command:AT+RX2DL**
827 827  {{/info}}
828 828  
829 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
721 +(% style="background-color:#ffffcc; color:green; width:481.222px" %)
830 830  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
831 831  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
832 832  |(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
... ... @@ -844,7 +844,7 @@
844 844  **AT Command:AT+RX2DR**
845 845  {{/info}}
846 846  
847 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
739 +(% style="background-color:#ffffcc; color:green; width:525.222px" %)
848 848  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
849 849  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
850 850  |(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
... ... @@ -862,7 +862,7 @@
862 862  **AT Command:AT+RX2FQ**
863 863  {{/info}}
864 864  
865 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
757 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
866 866  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
867 867  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
868 868  |(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
... ... @@ -880,7 +880,7 @@
880 880  **AT Command:AT+TXP**
881 881  {{/info}}
882 882  
883 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
775 +(% style="background-color:#ffffcc; color:green; width:465.222px" %)
884 884  |=(% colspan="3" style="width: 462px;" %)AT+TXP
885 885  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
886 886  |(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
... ... @@ -905,7 +905,7 @@
905 905  **AT Command:AT+RSSI**
906 906  {{/info}}
907 907  
908 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
800 +(% style="background-color:#ffffcc; color:green; width:557.222px" %)
909 909  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
910 910  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
911 911  |(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
... ... @@ -920,7 +920,7 @@
920 920  **AT Command:AT+SNR**
921 921  {{/info}}
922 922  
923 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
815 +(% style="background-color:#ffffcc; color:green; width:571.222px" %)
924 924  |=(% colspan="3" style="width: 568px;" %)AT+SNR
925 925  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
926 926  |(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
... ... @@ -935,7 +935,7 @@
935 935  **AT Command: AT+PORT**
936 936  {{/info}}
937 937  
938 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
830 +(% style="background-color:#ffffcc; color:green; width:500.222px" %)
939 939  |=(% colspan="3" style="width: 497px;" %)AT+PORT
940 940  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
941 941  |(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
... ... @@ -962,7 +962,7 @@
962 962  **AT Command: AT+CHS**
963 963  {{/info}}
964 964  
965 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
857 +(% style="background-color:#ffffcc; color:green; width:603.222px" %)
966 966  |=(% colspan="3" style="width: 600px;" %)AT+CHS
967 967  |(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
968 968  |(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
... ... @@ -978,7 +978,7 @@
978 978  **AT Command: AT+CHE**
979 979  {{/info}}
980 980  
981 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
873 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
982 982  |=(% colspan="3" style="width: 707px;" %)AT+CHE
983 983  |(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
984 984  |(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
... ... @@ -1007,7 +1007,7 @@
1007 1007  **AT Command: AT+RX1WTO**
1008 1008  {{/info}}
1009 1009  
1010 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
902 +(% style="background-color:#ffffcc; color:green; width:460.222px" %)
1011 1011  |=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1012 1012  |(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1013 1013  |(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
... ... @@ -1015,18 +1015,12 @@
1015 1015  )))
1016 1016  |(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
1017 1017  
1018 -(((
1019 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1020 -)))
910 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1021 1021  
1022 -[[image:image-20220526162535-1.png]]
912 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1023 1023  
1024 -(((
1025 1025  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1026 1026  
1027 -
1028 -)))
1029 -
1030 1030  == 7.21 Get or Set RXwindows2 timeout ==
1031 1031  
1032 1032  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
... ... @@ -1035,7 +1035,7 @@
1035 1035  **AT Command: AT+RX2WTO**
1036 1036  {{/info}}
1037 1037  
1038 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
924 +(% style="background-color:#ffffcc; color:green; width:497.222px" %)
1039 1039  |=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1040 1040  |(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1041 1041  |(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
... ... @@ -1051,7 +1051,7 @@
1051 1051  **AT Command: AT+DWELLT**
1052 1052  {{/info}}
1053 1053  
1054 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
940 +(% style="background-color:#ffffcc; color:green; width:497.222px" %)
1055 1055  |=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1056 1056  |(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1057 1057  |(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
... ... @@ -1092,7 +1092,7 @@
1092 1092  **AT Command: AT+RPL**
1093 1093  {{/info}}
1094 1094  
1095 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
981 +(% style="background-color:#ffffcc; color:green; width:536.222px" %)
1096 1096  |=(% colspan="3" style="width: 533px;" %)AT+RPL
1097 1097  |(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1098 1098  |(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
... ... @@ -1126,6 +1126,6 @@
1126 1126  
1127 1127  Same as:
1128 1128  
1129 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1130 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1131 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1015 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]]
1016 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
1017 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220511120050-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -136.3 KB
Content
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0