Last modified by kai on 2024/09/06 10:00
<
From version < 38.85 >
edited by Xiaoling
on 2022/05/31 09:20
To version < 7.8 >
edited by Xiaoling
on 2022/05/11 11:17
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,9 +1,8 @@
1 - **Contents：**
1 +Contens
2 2  
3 3  {{toc/}}
4 4  
5 5  
6 -
7 7  = 1. Introduction =
8 8  
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
... ... @@ -11,95 +11,34 @@
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
12 12  * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device.
13 13  
14 -(((
15 15  **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.**
16 16  
17 -)))
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 -** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes for ChirpStack]]
25 -** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]]
21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]].
22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]]
26 26  
27 -
28 28  = 3. Support End Node and firmware version =
29 29  
30 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
31 -|=(% colspan="3" style="width: 963px;" %)(((
32 -Dragino STM32 base hardware Firmware / LoRaWAN stack list
33 -)))
34 -|(% style="width:187px" %)(((
35 -**Model**
36 -)))|(% style="width:330px" %)(((
37 -**Description**
38 -)))|(% style="width:445px" %)(((
39 -**Firmware Version <~-~-> Stack Version**
40 -)))
41 -|(% style="width:187px" %)(((
42 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],
43 -)))|(% style="width:330px" %)(((
44 -Open Source Generic LoRaWAN Sensor Node
45 -)))|(% style="width:445px" %)(((
46 -(((
47 -LSN50 v1.6.0 <~-~-> DR-LWS-003;
48 -)))
49 -
50 -(((
51 -(((
26 +(% style="background-color:#ffffcc; color:green; width:995.222px" %)
27 +|=(% colspan="3" style="width: 992px;" %)Dragino STM32 base hardware Firmware / LoRaWAN stack list
28 +|(% style="width:187px" %)**Model**|(% style="width:349px" %)**Description**|(% style="width:453px" %)**Firmware Version <~-~-> Stack Version**
29 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:349px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:453px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;(((
52 52  LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version
53 53  )))
54 -)))
55 -)))
56 -|(% style="width:187px" %)(((
57 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],
58 -)))|(% style="width:330px" %)(((
59 -LoRaWAN GPS Tracker
60 -)))|(% style="width:445px" %)(((
61 -(((
62 -LGT92 v1.6.3 <~-~-> DR-LWS-003;
63 -)))
64 -
65 -(((
66 -(((
32 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:349px" %)LoRaWAN GPS Tracker|(% style="width:453px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;(((
67 67  LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version
68 68  )))
69 -)))
70 -)))
71 -|(% style="width:187px" %)(((
72 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],
73 -)))|(% style="width:330px" %)(((
74 -LoRaWAN BLE Indoor Tracker
75 -)))|(% style="width:445px" %)(((
76 -LBT1 v1.0 <~-~-> DR-LWS-005;
77 -)))
78 -|(% style="width:187px" %)(((
79 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],
80 -)))|(% style="width:330px" %)(((
81 -LoRaWAN RS485 Modbus Converter
82 -)))|(% style="width:445px" %)(((
83 -RS485-LN v1.3 <~-~-> DR-LWS-005;
84 -)))
85 -|(% style="width:187px" %)(((
86 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],
87 -)))|(% style="width:330px" %)(((
88 -LoRaWAN Temperature & Humidity Sensor
89 -)))|(% style="width:445px" %)(((
90 -(((
91 -LHT65 v1.7 <~-~-> DR-LWS-003;
92 -)))
93 -
94 -(((
95 -(((
35 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:349px" %)LoRaWAN BLE Indoor Tracker|(% style="width:453px" %)LBT1 v1.0 <~-~-> DR-LWS-005;
36 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:349px" %)LoRaWAN RS485 Modbus Converter|(% style="width:453px" %)RS485-LN v1.3 <~-~-> DR-LWS-005;
37 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:349px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:453px" %)LHT65 v1.7 <~-~-> DR-LWS-003;(((
96 96  LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version
97 97  )))
98 -)))
99 -)))
100 100  
101 -
102 -
103 103  = 4. System Management Commands =
104 104  
105 105  == 4.1 Change Uplink Interval ==
... ... @@ -111,7 +111,7 @@
111 111  **AT Command: AT+TDC**
112 112  )))
113 113  
114 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
52 +(% style="background-color:#ffffcc; color:green; width:727.222px" %)
115 115  |=(% colspan="3" style="width: 724px;" %)AT+TDC
116 116  |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
117 117  |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000(((
... ... @@ -127,19 +127,13 @@
127 127  **Downlink Command: 0x01**
128 128  {{/info}}
129 129  
130 -(((
131 131  Format: Command Code (0x01) followed by 3 bytes time value.
132 -)))
133 133  
134 -(((
135 135  If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01.
136 -)))
137 137  
138 138  * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds
139 139  * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds
140 140  
141 -
142 -
143 143  == 4.2 Reboot End Node ==
144 144  
145 145  Feature: Reboot End Node to perform a new OTAA or ABP Join.
... ... @@ -148,7 +148,7 @@
148 148  **AT Command: ATZ**
149 149  {{/info}}
150 150  
151 -(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
83 +(% border="0" style="background-color:#ffffcc; color:green; width:727.222px" %)
152 152  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
153 153  |**Command Example**|**Function**|**Response**
154 154  |ATZ|Reset MCU|(((
... ... @@ -169,16 +169,10 @@
169 169  **Downlink Command: 0x04**
170 170  {{/info}}
171 171  
172 -(((
173 173  Format: Command Code (0x04) followed by FF.
174 -)))
175 175  
176 -(((
177 177  If the downlink payload=**04FF**, the end node will reboot.
178 178  
179 -
180 -)))
181 -
182 182  == 4.3 Reset to factory Default ==
183 183  
184 184  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
... ... @@ -187,7 +187,7 @@
187 187  **AT Command: AT+FDR**
188 188  {{/info}}
189 189  
190 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
116 +(% style="background-color:#ffffcc; color:green; width:831.222px" %)
191 191  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
192 192  |(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response**
193 193  |(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)(((
... ... @@ -208,13 +208,9 @@
208 208  **Downlink Command: 0x04**
209 209  {{/info}}
210 210  
211 -(((
212 212  Format: Command Code (0x04) followed by FE.
213 -)))
214 214  
215 -(((
216 216  If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve.
217 -)))
218 218  
219 219  
220 220  == 4.4 Show Firmware Version ==
... ... @@ -225,10 +225,10 @@
225 225  **AT Command: AT+VER**
226 226  {{/info}}
227 227  
228 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
229 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
230 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
231 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)(((
150 +(% style="background-color:#ffffcc; color:green" %)
151 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band
152 +|**Command Example**|**Function**|**Response**
153 +|AT+VER=?|Show Image version and Frequency Band|(((
232 232  1.3 EU868
233 233  
234 234  OK
... ... @@ -238,25 +238,17 @@
238 238  **Downlink Command: 0x26 (Valid in 006 stack)**
239 239  {{/info}}
240 240  
241 -(((
242 242  Downlink Format: 0x26
243 -)))
244 244  
245 -(((
246 246  Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes
247 -)))
248 248  
249 -(((
250 250  **xx: Software Type:**
251 -)))
252 252  
253 253  * 0x00 01: LGT92 Version
254 254  * 0x00 02: LBT1
255 255  * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01
256 256  
257 -(((
258 258  **yy: Frequency Band:**
259 -)))
260 260  
261 261  * 0x01: EU868
262 262  * 0x02: US915
... ... @@ -269,9 +269,7 @@
269 269  * 0x09: AS923-2
270 270  * 0xa0: AS923-3
271 271  
272 -(((
273 273  **zz: Subband**
274 -)))
275 275  
276 276  firmware version: v1.1.0 ~-~-> 110
277 277  
... ... @@ -284,7 +284,7 @@
284 284  **AT Command: AT+CFG**
285 285  {{/info}}
286 286  
287 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
199 +(% style="background-color:#ffffcc; color:green; width:599.222px" %)
288 288  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
289 289  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
290 290  |(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)(((
... ... @@ -301,8 +301,6 @@
301 301  OK
302 302  )))
303 303  
304 -
305 -
306 306  = 5. Keys, IDs and EUIs management =
307 307  
308 308  == 5.1 Application EUI ==
... ... @@ -313,7 +313,7 @@
313 313  **AT Command: AT+APPEUI**
314 314  {{/info}}
315 315  
316 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
226 +(% style="background-color:#ffffcc; color:green; width:686.222px" %)
317 317  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
318 318  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
319 319  |(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00(((
... ... @@ -321,8 +321,6 @@
321 321  )))
322 322  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
323 323  
324 -
325 -
326 326  == 5.2 Application Key ==
327 327  
328 328  Feature: Get or Set the Application Key.
... ... @@ -331,7 +331,7 @@
331 331  **AT Command: AT+APPKEY**
332 332  {{/info}}
333 333  
334 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
242 +(% style="background-color:#ffffcc; color:green; width:976.222px" %)
335 335  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
336 336  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
337 337  |(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35(((
... ... @@ -339,7 +339,6 @@
339 339  )))
340 340  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
341 341  
342 -
343 343  == 5.3 Application Session Key ==
344 344  
345 345  Feature: Get or Set the Application Session Key.
... ... @@ -348,7 +348,7 @@
348 348  **AT Command: AT+APPSKEY**
349 349  {{/info}}
350 350  
351 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
258 +(% style="background-color:#ffffcc; color:green; width:1040.22px" %)
352 352  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
353 353  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
354 354  |(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2(((
... ... @@ -358,7 +358,6 @@
358 358  OK
359 359  )))
360 360  
361 -
362 362  == 5.4 Device Address ==
363 363  
364 364  Feature: Get or Set the Device Address.
... ... @@ -367,7 +367,7 @@
367 367  **AT Command: AT+DADDR**
368 368  {{/info}}
369 369  
370 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
276 +(% style="background-color:#ffffcc; color:green; width:795.222px" %)
371 371  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
372 372  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
373 373  |(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)(((
... ... @@ -377,7 +377,6 @@
377 377  )))
378 378  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
379 379  
380 -
381 381  == 5.5 Device EUI ==
382 382  
383 383  Feature: Get or Set the Device EUI.
... ... @@ -386,7 +386,7 @@
386 386  **AT Command: AT+DEUI**
387 387  {{/info}}
388 388  
389 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
294 +(% style="background-color:#ffffcc; color:green; width:1035.22px" %)
390 390  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
391 391  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
392 392  |(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55(((
... ... @@ -396,7 +396,6 @@
396 396  OK
397 397  )))
398 398  
399 -
400 400  == 5.6 Network ID ==
401 401  
402 402  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
... ... @@ -405,7 +405,7 @@
405 405  **AT Command: AT+NWKID**
406 406  {{/info}}
407 407  
408 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
312 +(% style="background-color:#ffffcc; color:green; width:448.222px" %)
409 409  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
410 410  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
411 411  |(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff(((
... ... @@ -413,7 +413,6 @@
413 413  )))
414 414  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
415 415  
416 -
417 417  == 5.7 Network Session Key ==
418 418  
419 419  Feature: Get or Set the Network Session Key
... ... @@ -422,7 +422,7 @@
422 422  **AT Command: AT+NWKSKEY**
423 423  {{/info}}
424 424  
425 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
328 +(% style="background-color:#ffffcc; color:green; width:1017.22px" %)
426 426  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
427 427  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
428 428  |(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92(((
... ... @@ -430,7 +430,6 @@
430 430  )))
431 431  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
432 432  
433 -
434 434  = 6. Joining and sending date on LoRaWAN network =
435 435  
436 436  == 6.1 Confirm Mode ==
... ... @@ -441,7 +441,7 @@
441 441  **AT Command: AT+CFM**
442 442  {{/info}}
443 443  
444 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
346 +(% style="background-color:#ffffcc; color:green; width:710.222px" %)
445 445  |=(% colspan="3" style="width: 707px;" %)AT+CFM
446 446  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
447 447  |(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0(((
... ... @@ -459,7 +459,6 @@
459 459  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
460 460  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
461 461  
462 -
463 463  == 6.2 Confirm Status ==
464 464  
465 465  Feature: Get confirmation status of the last AT+SEND (0-1).
... ... @@ -468,7 +468,7 @@
468 468  **AT Command: AT+CFS**
469 469  {{/info}}
470 470  
471 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
372 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
472 472  |=(% colspan="3" style="width: 531px;" %)AT+CFS
473 473  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
474 474  |(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0(((
... ... @@ -475,7 +475,6 @@
475 475  OK
476 476  )))
477 477  
478 -
479 479  == 6.3 Join LoRa® Network ==
480 480  
481 481  Feature: Join network.
... ... @@ -484,7 +484,7 @@
484 484  **AT Command: AT+JOIN**
485 485  {{/info}}
486 486  
487 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
387 +(% style="background-color:#ffffcc; color:green; width:647.222px" %)
488 488  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
489 489  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
490 490  |(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network(((
... ... @@ -493,8 +493,6 @@
493 493  While Error in format, return AT_BUSY_ERROR
494 494  )))
495 495  
496 -
497 -
498 498  == 6.4 LoRa® Network Join Mode ==
499 499  
500 500  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
... ... @@ -503,7 +503,7 @@
503 503  **AT Command: AT+NJM**
504 504  {{/info}}
505 505  
506 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
404 +(% style="background-color:#ffffcc; color:green; width:753.222px" %)
507 507  |=(% colspan="3" style="width: 750px;" %)AT+NJM
508 508  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
509 509  |(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1(((
... ... @@ -523,8 +523,6 @@
523 523  * **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
524 524  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
525 525  
526 -
527 -
528 528  == 6.5 LoRa® Network Join Status ==
529 529  
530 530  Feature: LoRa® Network Join Status.
... ... @@ -533,7 +533,7 @@
533 533  **AT Command: AT+NJS**
534 534  {{/info}}
535 535  
536 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
432 +(% style="background-color:#ffffcc; color:green; width:498.222px" %)
537 537  |=(% colspan="3" style="width: 495px;" %)AT+NJS
538 538  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
539 539  |(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0(((
... ... @@ -548,7 +548,7 @@
548 548  **AT Command: AT+RECV**
549 549  {{/info}}
550 550  
551 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
447 +(% style="background-color:#ffffcc; color:green; width:587.222px" %)
552 552  |=(% colspan="3" style="width: 584px;" %)AT+RECV
553 553  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
554 554  |(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:(((
... ... @@ -563,7 +563,7 @@
563 563  **AT Command: AT+RECVB**
564 564  {{/info}}
565 565  
566 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
462 +(% style="background-color:#ffffcc; color:green; width:793.222px" %)
567 567  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
568 568  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
569 569  |(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010(((
... ... @@ -578,7 +578,7 @@
578 578  **AT Command: AT+SEND**
579 579  {{/info}}
580 580  
581 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
477 +(% style="background-color:#ffffcc; color:green; width:991.222px" %)
582 582  |=(% colspan="3" style="width: 988px;" %)AT+SEND
583 583  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
584 584  |(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK(((
... ... @@ -597,7 +597,7 @@
597 597  **AT Command: AT+SENDB**
598 598  {{/info}}
599 599  
600 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
496 +(% style="background-color:#ffffcc; color:green; width:1120.22px" %)
601 601  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
602 602  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
603 603  |(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK
... ... @@ -617,7 +617,7 @@
617 617  **AT Command: AT+ADR**
618 618  {{/info}}
619 619  
620 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
516 +(% style="background-color:#ffffcc; color:green; width:683.222px" %)
621 621  |=(% colspan="3" style="width: 680px;" %)AT+ADR
622 622  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
623 623  |(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1(((
... ... @@ -646,7 +646,7 @@
646 646  **AT Command:AT+CLASS**
647 647  {{/info}}
648 648  
649 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
545 +(% style="background-color:#ffffcc; color:green; width:507.222px" %)
650 650  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
651 651  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
652 652  |(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A(((
... ... @@ -664,7 +664,7 @@
664 664  **AT Command:AT+DCS**
665 665  {{/info}}
666 666  
667 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
563 +(% style="background-color:#ffffcc; color:green; width:515.222px" %)
668 668  |=(% colspan="3" style="width: 512px;" %)AT+DCS
669 669  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
670 670  |(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1(((
... ... @@ -682,7 +682,7 @@
682 682  **AT Command: AT+DR**
683 683  {{/info}}
684 684  
685 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
581 +(% style="background-color:#ffffcc; color:green; width:466.222px" %)
686 686  |=(% colspan="3" style="width: 463px;" %)AT+DR
687 687  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
688 688  |(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5(((
... ... @@ -710,7 +710,7 @@
710 710  **AT Command:AT+FCD**
711 711  {{/info}}
712 712  
713 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
609 +(% style="background-color:#ffffcc; color:green; width:693.222px" %)
714 714  |=(% colspan="3" style="width: 690px;" %)AT+FCD
715 715  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
716 716  |(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0(((
... ... @@ -730,7 +730,7 @@
730 730  **AT Command:AT+FCU**
731 731  {{/info}}
732 732  
733 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
629 +(% style="background-color:#ffffcc; color:green; width:534.222px" %)
734 734  |=(% colspan="3" style="width: 531px;" %)AT+FCU
735 735  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
736 736  |(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0(((
... ... @@ -748,7 +748,7 @@
748 748  **AT Command:AT+JN1DL**
749 749  {{/info}}
750 750  
751 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
647 +(% style="background-color:#ffffcc; color:green; width:537.222px" %)
752 752  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
753 753  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
754 754  |(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000(((
... ... @@ -766,7 +766,7 @@
766 766  **AT Command:AT+JN2DL**
767 767  {{/info}}
768 768  
769 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
665 +(% style="background-color:#ffffcc; color:green; width:538.222px" %)
770 770  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
771 771  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
772 772  |(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000(((
... ... @@ -784,7 +784,7 @@
784 784  **AT Command:AT+PNM**
785 785  {{/info}}
786 786  
787 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
683 +(% style="background-color:#ffffcc; color:green; width:667.222px" %)
788 788  |=(% colspan="3" style="width: 664px;" %)AT+PNM
789 789  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
790 790  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
... ... @@ -804,7 +804,7 @@
804 804  **AT Command:AT+RX1DL**
805 805  {{/info}}
806 806  
807 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
703 +(% style="background-color:#ffffcc; color:green; width:408.222px" %)
808 808  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
809 809  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
810 810  |(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000(((
... ... @@ -814,21 +814,18 @@
814 814  
815 815  )))
816 816  
817 -== 7.11 Receive Delay2 ==
713 +== 7.11Receive Delay2 ==
818 818  
819 819  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
820 820  
821 -{{info}}
822 -**AT Command:AT+RX2DL**
823 -{{/info}}
717 +AT Command:AT+RX2DL
824 824  
825 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
826 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL
827 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
828 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000(((
719 +|=(% colspan="3" %)AT+RX2DL
720 +|**Command Example**|**Function**|**Response**
721 +|AT+RX2DL=?|Get the delay.|2000(((
829 829  OK
830 830  )))
831 -|(% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((
724 +|AT+RX2DL=2500|Set the delay.|OK(((
832 832  
833 833  )))
834 834  
... ... @@ -836,17 +836,14 @@
836 836  
837 837  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
838 838  
839 -{{info}}
840 -**AT Command:AT+RX2DR**
841 -{{/info}}
732 +AT Command:AT+RX2DR
842 842  
843 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
844 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR
845 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
846 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2(((
734 +|=(% colspan="3" %)AT+RX2DR
735 +|**Command Example**|**Function**|**Response**
736 +|AT+RX2DR=?|Get the Rx2 window data rate.|2(((
847 847  OK
848 848  )))
849 -|(% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((
739 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK(((
850 850  
851 851  )))
852 852  
... ... @@ -854,17 +854,14 @@
854 854  
855 855  Feature: Get or Set the Rx2 window frequency
856 856  
857 -{{info}}
858 -**AT Command:AT+RX2FQ**
859 -{{/info}}
747 +AT Command:AT+RX2FQ
860 860  
861 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
862 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
863 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
864 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000(((
749 +|=(% colspan="3" %)AT+RX2FQ
750 +|**Command Example**|**Function**|**Response**
751 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000(((
865 865  OK
866 866  )))
867 -|(% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((
754 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK(((
868 868  
869 869  )))
870 870  
... ... @@ -872,17 +872,14 @@
872 872  
873 873  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
874 874  
875 -{{info}}
876 -**AT Command:AT+TXP**
877 -{{/info}}
762 +AT Command:AT+TXP
878 878  
879 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
880 -|=(% colspan="3" style="width: 462px;" %)AT+TXP
881 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
882 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0(((
764 +|=(% colspan="3" %)AT+TXP
765 +|**Command Example**|**Function**|**Response**
766 +|AT+TXP=?|Get the Transmit Power.|0(((
883 883  OK
884 884  )))
885 -|(% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((
769 +|AT+TXP=1|Set the Transmit Power.|OK(((
886 886  
887 887  )))
888 888  
... ... @@ -890,21 +890,18 @@
890 890  
891 891  If the downlink payload=22000100, it means setting the TXP to 0.
892 892  
893 -* **Example 1**: Downlink Payload: **22000102** ~/~/ Set AT+TXP=2.
894 -* **Example 2**: Downlink Payload: **220000FF** ~/~/ Set AT+TXP=0.
777 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2.
778 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0.
895 895  
896 896  == 7.15 RSSI of the Last Received Packet ==
897 897  
898 898  Feature: Get or Set the Rx2 window frequency
899 899  
900 -{{info}}
901 -**AT Command:AT+RSSI**
902 -{{/info}}
784 +AT Command:AT+RSSI
903 903  
904 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
905 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI
906 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
907 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0(((
786 +|=(% colspan="3" %)AT+RSSI
787 +|**Command Example**|**Function**|**Response**
788 +|AT+RSSI=?|Get the RSSI of the last received packet.|0(((
908 908  OK
909 909  )))
910 910  
... ... @@ -912,14 +912,11 @@
912 912  
913 913  Feature: Get the SNR of the last received packet
914 914  
915 -{{info}}
916 -**AT Command:AT+SNR**
917 -{{/info}}
796 +AT Command:AT+SNR
918 918  
919 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
920 -|=(% colspan="3" style="width: 568px;" %)AT+SNR
921 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
922 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0(((
798 +|=(% colspan="3" %)AT+SNR
799 +|**Command Example**|**Function**|**Response**
800 +|AT+SNR=?|Get the RSSI of the last received packet.|0(((
923 923  OK
924 924  )))
925 925  
... ... @@ -927,144 +927,114 @@
927 927  
928 928  Feature: Get or set the application port.
929 929  
930 -{{info}}
931 -**AT Command: AT+PORT**
932 -{{/info}}
808 +AT Command: AT+PORT
933 933  
934 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
935 -|=(% colspan="3" style="width: 497px;" %)AT+PORT
936 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
937 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21(((
810 +|=(% colspan="3" %)AT+PORT
811 +|**Command Example**|**Function**|**Response**
812 +|AT+PORT=?|Get the application port|21(((
938 938  OK
939 939  )))
940 -|(% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK
815 +|AT+PORT=21|Set the application port|OK
941 941  
942 -{{info}}
943 -**Downlink Command: 0x23**
944 -{{/info}}
817 +Downlink Command: 0x23
945 945  
946 946  Format: Command Code (0x23) followed by 1 bytes port value.
947 947  
948 948  If the downlink payload=2301, it means set the application port to 1, while type code is 23.
949 949  
950 -* **Example 1**: Downlink Payload: **2301** ~/~/ set the application port to 1
951 -* **Example 2**: Downlink Payload:** 2305** ~/~/ set the application port to 5
823 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1
824 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5
952 952  
953 953  == 7.18 Single Channel Mode ==
954 954  
955 955  Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode.
956 956  
957 -{{info}}
958 -**AT Command: AT+CHS**
959 -{{/info}}
830 +AT Command: AT+CHS
960 960  
961 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %)
962 -|=(% colspan="3" style="width: 600px;" %)AT+CHS
963 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response**
964 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0(((
832 +|=(% colspan="3" %)AT+CHS
833 +|**Command Example**|**Function**|**Response**
834 +|AT+CHS=?|Get Frequency for Single Channel Mode|0(((
965 965  OK
966 966  )))
967 -|(% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK
837 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK
968 968  
969 969  == 7.19 Eight Channel Mode ==
970 970  
971 971  Feature: Get or Set eight channels mode,Only for US915,AU915,CN470.
972 972  
973 -{{info}}
974 -**AT Command: AT+CHE**
975 -{{/info}}
843 +AT Command: AT+CHE
976 976  
977 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
978 -|=(% colspan="3" style="width: 707px;" %)AT+CHE
979 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
980 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1(((
845 +|=(% colspan="3" %)AT+CHE
846 +|**Command Example**|**Function**|**Response**
847 +|AT+CHE=?|Get eight channels mode|1(((
981 981  902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7
982 982  
983 983  OK
984 984  )))
985 -|(% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK
852 +|AT+CHE=1|Set eight channels mode|OK
986 986  
987 -{{info}}
988 -**Downlink Command: 0x24**
989 -{{/info}}
854 +Downlink Command: 0x24
990 990  
991 991  Format: Command Code (0x24) followed by 1 bytes channel value.
992 992  
993 993  If the downlink payload=2401, it means set channel mode to 1, while type code is 24.
994 994  
995 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1
996 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5
860 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1
861 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5
997 997  
998 998  == 7.20 Get or Set RXwindows1 timeout ==
999 999  
1000 1000  Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255).
1001 1001  
1002 -{{info}}
1003 -**AT Command: AT+RX1WTO**
1004 -{{/info}}
867 +AT Command: AT+RX1WTO
1005 1005  
1006 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %)
1007 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO
1008 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response**
1009 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14(((
869 +|=(% colspan="3" %)AT+ RX1WTO
870 +|**Command Example**|**Function**|**Response**
871 +|AT+RX1WTO=?|Get RXwindows1 timeout|14(((
1010 1010  OK
1011 1011  )))
1012 -|(% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK
874 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK
1013 1013  
1014 -(((
1015 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1016 -)))
876 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph.
1017 1017  
1018 -[[image:image-20220526162535-1.png]]
878 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]]
1019 1019  
1020 -(((
1021 1021  Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink.
1022 1022  
1023 -
1024 -)))
1025 -
1026 1026  == 7.21 Get or Set RXwindows2 timeout ==
1027 1027  
1028 1028  Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255).
1029 1029  
1030 -{{info}}
1031 -**AT Command: AT+RX2WTO**
1032 -{{/info}}
886 +AT Command: AT+RX2WTO
1033 1033  
1034 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1035 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO
1036 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response**
1037 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7(((
888 +|=(% colspan="3" %)AT+ RX2WTO
889 +|**Command Example**|**Function**|**Response**
890 +|AT+RX2WTO=?|Get RXwindows2 timeout|7(((
1038 1038  OK
1039 1039  )))
1040 -|(% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK
893 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK
1041 1041  
1042 1042  == 7.22 Setting up uplinkdwelltime (as923, au915) ==
1043 1043  
1044 1044  Feature: Get or Set uplinkdwelltime
1045 1045  
1046 -{{info}}
1047 -**AT Command: AT+DWELLT**
1048 -{{/info}}
899 +AT Command: AT+DWELLT
1049 1049  
1050 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %)
1051 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT
1052 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response**
1053 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1(((
901 +|=(% colspan="3" %)AT+DWELLT
902 +|**Command Example**|**Function**|**Response**
903 +|AT+DWELLT=?|Get uplinkdwelltime|1(((
1054 1054  OK
1055 1055  )))
1056 -|(% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK
906 +|AT+DWELLT=0|Set uplinkdwelltime|OK
1057 1057  
1058 -{{info}}
1059 -**Downlink Command: 0x25**
1060 -{{/info}}
908 +Downlink Command: 0x25
1061 1061  
1062 1062  Format: Command Code (0x25) followed by 1 bytes state value.
1063 1063  
1064 1064  If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25.
1065 1065  
1066 -* **Example 1**: Downlink Payload: **2501** ~/~/ set uplinkdwelltime to 1
1067 -* **Example 2**: Downlink Payload: **2500** ~/~/ set uplinkdwelltime to 0
914 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1
915 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0
1068 1068  
1069 1069  == 7.23 Set Packet Receiving Response Level ==
1070 1070  
... ... @@ -1072,11 +1072,11 @@
1072 1072  
1073 1073  RPL value:
1074 1074  
1075 -* **AT+RPL=0:** Device won't immediately reply any downlink commands from platform.
1076 -* **AT+RPL=1:** Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
1077 -* **AT+RPL=2:** Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
1078 -* **AT+RPL=3:** Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
1079 -* **AT+RPL=4: **Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
923 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform.
924 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.
925 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.
926 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.
927 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.
1080 1080  
1081 1081  Case Analyes:
1082 1082  
... ... @@ -1084,44 +1084,37 @@
1084 1084  * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command.
1085 1085  * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command.
1086 1086  
1087 -{{info}}
1088 -**AT Command: AT+RPL**
1089 -{{/info}}
935 +AT Command: AT+RPL
1090 1090  
1091 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1092 -|=(% colspan="3" style="width: 533px;" %)AT+RPL
1093 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1094 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1(((
937 +|=(% colspan="3" %)AT+RPL
938 +|**Command Example**|**Function**|**Response**
939 +|AT+RPL=?|Get packet receiving response level|1(((
1095 1095  OK
1096 1096  )))
1097 -|(% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK
942 +|AT+RPL=0|Set packet receiving response level|OK
1098 1098  
1099 -{{info}}
1100 -**Downlink Command: 0x21**
1101 -{{/info}}
944 +Downlink Command: 0x21
1102 1102  
1103 1103  Format: Command Code (0x21) followed by 1 bytes level value.
1104 1104  
1105 1105  If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21.
1106 1106  
1107 -* **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1108 -* **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
950 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1
951 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2
1109 1109  
1110 1110  = 8. AT Commands Combination =
1111 1111  
1112 1112  == 8.1 Set a fix RX2DR for downlink window ==
1113 1113  
1114 -* **AT+ADR=0 **~-~-> Disable ADR first
1115 -* **AT+RX2DR=xxxx** ~-~-> Set xxxx to your wanted DataRate
957 +* AT+ADR=0 ~-~-> Disable ADR first
958 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate
1116 1116  
1117 1117  == 8.2 Use Downlink Command to set a fix uplink DR ==
1118 1118  
1119 -{{info}}
1120 -**Downlink Command: 0x22000500**
1121 -{{/info}}
962 +Downlink Command: 0x22000500
1122 1122  
1123 1123  Same as:
1124 1124  
1125 -* AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1126 -* AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1127 -* AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
966 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]]
967 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]]
968 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
image-20220511120050-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -136.3 KB
Content
image-20220526162535-1.png
Author
... ... @@ -1,1 +1,0 @@
1 -XWiki.Xiaoling
Size
... ... @@ -1,1 +1,0 @@
1 -149.4 KB
Content

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0