Changes for page End Device AT Commands and Downlink Command
Last modified by kai on 2024/09/06 10:00
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 2 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,9 +1,8 @@ 1 - **Contents：**1 +Contens 2 2 3 3 {{toc/}} 4 4 5 5 6 - 7 7 = 1. Introduction = 8 8 9 9 Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands: ... ... @@ -11,95 +11,62 @@ 11 11 * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device. 12 12 * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device. 13 13 14 -((( 15 15 **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.** 16 16 17 -))) 18 18 19 19 = 2. How to use AT Commands or Downlink command = 20 20 21 21 * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]] 22 22 * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command: 23 -** Use HEX format to send a downlink: [[TTN v3>>Notes 24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes 25 -** See use note for more serves [[Servers Note>>doc :Main.WebHome]](IoT LoRaWANServer)20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]] 21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]]. 22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]] 26 26 27 - 28 28 = 3. Support End Node and firmware version = 29 29 30 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %) 31 -|=(% colspan="3" style="width: 963px;" %)((( 32 -Dragino STM32 base hardware Firmware / LoRaWAN stack list 33 -))) 34 -|(% style="width:187px" %)((( 35 -**Model** 36 -)))|(% style="width:330px" %)((( 37 -**Description** 38 -)))|(% style="width:445px" %)((( 39 -**Firmware Version <~-~-> Stack Version** 40 -))) 41 -|(% style="width:187px" %)((( 42 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]], 43 -)))|(% style="width:330px" %)((( 44 -Open Source Generic LoRaWAN Sensor Node 45 -)))|(% style="width:445px" %)((( 46 -((( 47 -LSN50 v1.6.0 <~-~-> DR-LWS-003; 48 -))) 49 49 50 -((( 51 -((( 27 +|=(% colspan="3" %)PWR LED4G control (Second +3.3v)USB POWER(+5v) Control 28 +|=PWR LED|=4G control (Second +3.3v)|=USB POWER(+5v) Control 29 +|((( 30 + 31 + 32 ++3.3v 33 +)))|((( 34 + 35 + 36 +GPIO15 37 +)))| 38 +|+3.3v|GPIO15 |GPIO1 39 +|+3.3v|GPIO15 |GPIO1 40 +|+3.3v| | 41 +|+3.3v|PA17| 42 + 43 +(% style="background-color:#ffffcc; color:green; width:1039.22px" %) 44 +|(% colspan="3" style="width:1036px" %)** Dragino STM32 base hardware Firmware / LoRaWAN stack list** 45 +|(% style="width:216px" %)**Model**|(% style="width:346px" %)**Description**|(% style="width:472px" %)**Firmware Version <~-~-> Stack Version** 46 +|(% style="width:216px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:346px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:472px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 52 52 LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 53 53 ))) 54 -))) 55 -))) 56 -|(% style="width:187px" %)((( 57 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]], 58 -)))|(% style="width:330px" %)((( 59 -LoRaWAN GPS Tracker 60 -)))|(% style="width:445px" %)((( 61 -((( 62 -LGT92 v1.6.3 <~-~-> DR-LWS-003; 63 -))) 49 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 50 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 51 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 52 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 64 64 65 -((( 66 -((( 54 +(% border="1" style="background-color:#ffffcc; color:green; width:942.222px" %) 55 +|=(% colspan="3" style="width: 939px;" %) Dragino STM32 base hardware Firmware / LoRaWAN stack list 56 +|(% style="width:187px" %)**Model**|(% style="width:306px" %)**Description**|(% style="width:443px" %)**Firmware Version <~-~-> Stack Version** 57 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:306px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:443px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 58 +LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 59 +))) 60 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:306px" %)LoRaWAN GPS Tracker|(% style="width:443px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;((( 67 67 LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version 68 68 ))) 69 -))) 70 -))) 71 -|(% style="width:187px" %)((( 72 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]], 73 -)))|(% style="width:330px" %)((( 74 -LoRaWAN BLE Indoor Tracker 75 -)))|(% style="width:445px" %)((( 76 -LBT1 v1.0 <~-~-> DR-LWS-005; 77 -))) 78 -|(% style="width:187px" %)((( 79 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]], 80 -)))|(% style="width:330px" %)((( 81 -LoRaWAN RS485 Modbus Converter 82 -)))|(% style="width:445px" %)((( 83 -RS485-LN v1.3 <~-~-> DR-LWS-005; 84 -))) 85 -|(% style="width:187px" %)((( 86 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]], 87 -)))|(% style="width:330px" %)((( 88 -LoRaWAN Temperature & Humidity Sensor 89 -)))|(% style="width:445px" %)((( 90 -((( 91 -LHT65 v1.7 <~-~-> DR-LWS-003; 92 -))) 93 - 94 -((( 95 -((( 63 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:306px" %)LoRaWAN BLE Indoor Tracker|(% style="width:443px" %)LBT1 v1.0 <~-~-> DR-LWS-005; 64 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:306px" %)LoRaWAN RS485 Modbus Converter|(% style="width:443px" %)RS485-LN v1.3 <~-~-> DR-LWS-005; 65 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:306px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:443px" %)LHT65 v1.7 <~-~-> DR-LWS-003;((( 96 96 LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version 97 97 ))) 98 -))) 99 -))) 100 100 101 - 102 - 103 103 = 4. System Management Commands = 104 104 105 105 == 4.1 Change Uplink Interval == ... ... @@ -108,11 +108,11 @@ 108 108 109 109 (% class="box infomessage" %) 110 110 ((( 111 - **AT Command: AT+TDC**77 +AT Command: AT+TDC 112 112 ))) 113 113 114 114 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 115 -|=(% colspan="3" style="width: 724px;" %)AT+TDC 81 +|=(% colspan="3" style="width: 724px;" %) AT+TDC 116 116 |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response** 117 117 |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000((( 118 118 OK ... ... @@ -123,34 +123,27 @@ 123 123 Set transmit interval to 60000ms = 60 seconds 124 124 ))) 125 125 126 -{{info}} 127 127 **Downlink Command: 0x01** 128 -{{/info}} 129 129 130 -((( 131 131 Format: Command Code (0x01) followed by 3 bytes time value. 132 -))) 133 133 134 -((( 135 135 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01. 136 -))) 137 137 138 138 * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds 139 139 * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds 140 140 141 - 142 - 143 143 == 4.2 Reboot End Node == 144 144 145 145 Feature: Reboot End Node to perform a new OTAA or ABP Join. 146 146 147 147 {{info}} 148 - **AT Command: ATZ**106 +AT Command: ATZ 149 149 {{/info}} 150 150 151 151 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 152 -|=(% colspan="3" %)ATZ: Trig a reset of the MCU 110 +|=(% colspan="3" %) ATZ: Trig a reset of the MCU 153 153 |**Command Example**|**Function**|**Response** 112 +~)~)~) 154 154 |ATZ|Reset MCU|((( 155 155 Device reset and show booting info 156 156 ... ... @@ -165,56 +165,35 @@ 165 165 <followed by the Tx and Rx information> 166 166 ))) 167 167 168 -{{info}} 169 -**Downlink Command: 0x04** 170 -{{/info}} 127 +Downlink Command: 0x04 171 171 172 -((( 173 173 Format: Command Code (0x04) followed by FF. 174 -))) 175 175 176 -((( 177 -If the downlink payload=**04FF**, the end node will reboot. 131 +If the downlink payload=04FF, the end node will reboot. 178 178 179 - 180 -))) 181 - 182 182 == 4.3 Reset to factory Default == 183 183 184 184 Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command. 185 185 186 -{{info}} 187 -**AT Command: AT+FDR** 188 -{{/info}} 137 +AT Command: AT+FDR 189 189 190 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %) 191 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default 192 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response** 193 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)((( 194 -Device reset to factory default parameters and show booting info 139 +|=(% colspan="3" %)Reset to factory default 140 +|**Command Example**|**Function**|**Response** 141 +|AT+FDR|Reset to factory default|Device reset to factory default parameters and show booting info 195 195 196 -LSN50 Device/LoRa ST Module 197 - 143 +{{{LSN50 Device/LoRa ST Module 198 198 Image Version: XX 199 - 200 200 Frequency Band: XX 201 - 202 202 DevEui= XX XX XX XX XX XX XX XX 203 - 204 204 Please set the parameters or reset Device to apply change 205 - )))148 +}}} 206 206 207 -{{info}} 208 -**Downlink Command: 0x04** 209 -{{/info}} 210 210 211 -((( 151 +Downlink Command: 0x04 152 + 212 212 Format: Command Code (0x04) followed by FE. 213 -))) 214 214 215 -((( 216 -If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve. 217 -))) 155 +If the downlink payload=04FE, Reset Parameters to Factory Default, Keys Reserve. 218 218 219 219 220 220 == 4.4 Show Firmware Version == ... ... @@ -221,42 +221,30 @@ 221 221 222 222 Feature: Show firmware version. No downlink command yet. 223 223 224 -{{info}} 225 -**AT Command: AT+VER** 226 -{{/info}} 162 +AT Command: AT+VER 227 227 228 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %) 229 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band 230 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response** 231 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)((( 232 -1.3 EU868 164 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band 165 +|**Command Example**|**Function**|**Response** 166 +|AT+VER=?|Show Image version and Frequency Band| 233 233 168 +{{{1.3 EU868 234 234 OK 235 - )))170 +}}} 236 236 237 -{{info}} 238 -**Downlink Command: 0x26 (Valid in 006 stack)** 239 -{{/info}} 240 240 241 -((( 173 +Downlink Command: 0x26 (Valid in 006 stack) 174 + 242 242 Downlink Format: 0x26 243 -))) 244 244 245 -((( 246 246 Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes 247 -))) 248 248 249 -((( 250 -**xx: Software Type:** 251 -))) 179 +xx: Software Type: 252 252 253 253 * 0x00 01: LGT92 Version 254 254 * 0x00 02: LBT1 255 255 * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01 256 256 257 -((( 258 -**yy: Frequency Band:** 259 -))) 185 +yy: Frequency Band: 260 260 261 261 * 0x01: EU868 262 262 * 0x02: US915 ... ... @@ -269,9 +269,7 @@ 269 269 * 0x09: AS923-2 270 270 * 0xa0: AS923-3 271 271 272 -((( 273 -**zz: Subband** 274 -))) 198 +zz: Subband 275 275 276 276 firmware version: v1.1.0 ~-~-> 110 277 277 ... ... @@ -280,29 +280,21 @@ 280 280 281 281 Feature: Show All configure. No downlink command yet. 282 282 283 -{{info}} 284 -**AT Command: AT+CFG** 285 -{{/info}} 207 +AT Command: AT+CFG 286 286 287 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %) 288 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations 289 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response** 290 -|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)((( 291 -AT+DEUI = XX XX XX XX XX XX XX XX 209 +|=(% colspan="3" %)AT+CFG: Print all configurations 210 +|**Command Example**|**Function**|**Response** 211 +|AT+CFG|Show all configures| 292 292 213 +{{{AT+DEUI = XX XX XX XX XX XX XX XX 293 293 AT+DADDR=XXXXXXXX 294 - 295 295 ………. 296 - 297 297 AT+RX2WTO=X 298 - 299 299 AT+CHS=868100000 300 - 301 301 OK 302 - )))219 +}}} 303 303 304 304 305 - 306 306 = 5. Keys, IDs and EUIs management = 307 307 308 308 == 5.1 Application EUI == ... ... @@ -309,128 +309,99 @@ 309 309 310 310 Feature: Get or Set the Application EUI. 311 311 312 -{{info}} 313 -**AT Command: AT+APPEUI** 314 -{{/info}} 228 +AT Command: AT+APPEUI 315 315 316 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %) 317 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI 318 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response** 319 -|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00((( 230 +|=(% colspan="3" %)AT+APPEUI 231 +|**Command Example**|**Function**|**Response** 232 +|AT+APPEUI=?|Get the Application EUI|00 b3 d5 00 00 00 00 00((( 320 320 OK 321 321 ))) 322 -| (% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK235 +|AT+APPEUI=00 b3 d5 7e f0 00 4d 34|Set the Application EUI|OK 323 323 324 - 325 - 326 326 == 5.2 Application Key == 327 327 328 328 Feature: Get or Set the Application Key. 329 329 330 -{{info}} 331 -**AT Command: AT+APPKEY** 332 -{{/info}} 241 +AT Command: AT+APPKEY 333 333 334 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %) 335 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY 336 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response** 337 -|(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 243 +|=(% colspan="3" %)AT+APPKEY 244 +|**Command Example**|**Function**|**Response** 245 +|AT+APPKEY=?|Get the Application Key|00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 338 338 OK 339 339 ))) 340 -| (% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK248 +|AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|Set the Application Key.|OK 341 341 342 - 343 343 == 5.3 Application Session Key == 344 344 345 345 Feature: Get or Set the Application Session Key. 346 346 347 -{{info}} 348 -**AT Command: AT+APPSKEY** 349 -{{/info}} 254 +AT Command: AT+APPSKEY 350 350 351 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %) 352 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY 353 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response** 354 -|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 256 +|=(% colspan="3" %)AT+APPSKEY 257 +|**Command Example**|**Function**|**Response** 258 +|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 355 355 OK 356 356 ))) 357 -| (% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)(((261 +|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 358 358 OK 359 359 ))) 360 360 361 - 362 362 == 5.4 Device Address == 363 363 364 364 Feature: Get or Set the Device Address. 365 365 366 -{{info}} 367 -**AT Command: AT+DADDR** 368 -{{/info}} 269 +AT Command: AT+DADDR 369 369 370 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %) 371 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR 372 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response** 373 -|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)((( 271 +|=(% colspan="3" %)AT+DADDR 272 +|**Command Example**|**Function**|**Response** 273 +|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 374 374 A8 40 41 FF 375 375 376 376 OK 377 377 ))) 378 -| (% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK278 +|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK 379 379 380 - 381 381 == 5.5 Device EUI == 382 382 383 383 Feature: Get or Set the Device EUI. 384 384 385 -{{info}} 386 -**AT Command: AT+DEUI** 387 -{{/info}} 284 +AT Command: AT+DEUI 388 388 389 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %) 390 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI 391 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response** 392 -|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55((( 286 +|=(% colspan="3" %)AT+DEUI 287 +|**Command Example**|**Function**|**Response** 288 +|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55((( 393 393 OK 394 394 ))) 395 -| (% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((291 +|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)((( 396 396 OK 397 397 ))) 398 398 399 - 400 400 == 5.6 Network ID == 401 401 402 402 Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection) 403 403 404 -{{info}} 405 -**AT Command: AT+NWKID** 406 -{{/info}} 299 +AT Command: AT+NWKID 407 407 408 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %) 409 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID 410 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response** 411 -|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff((( 301 +|=(% colspan="3" %)AT+NWKID 302 +|**Command Example**|**Function**|**Response** 303 +|AT+NWKID=?|Get the Network ID.|a8 40 41 ff((( 412 412 OK 413 413 ))) 414 -| (% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK306 +|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK 415 415 416 - 417 417 == 5.7 Network Session Key == 418 418 419 419 Feature: Get or Set the Network Session Key 420 420 421 -{{info}} 422 -**AT Command: AT+NWKSKEY** 423 -{{/info}} 312 +AT Command: AT+NWKSKEY 424 424 425 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %) 426 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY 427 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response** 428 -|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 314 +|=(% colspan="3" %)AT+NWKSKEY 315 +|**Command Example**|**Function**|**Response** 316 +|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 429 429 OK 430 430 ))) 431 -| (% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK319 +|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK 432 432 433 - 434 434 = 6. Joining and sending date on LoRaWAN network = 435 435 436 436 == 6.1 Confirm Mode == ... ... @@ -437,18 +437,15 @@ 437 437 438 438 Feature: Get or Set the confirmation mode (0-1). 439 439 440 -{{info}} 441 -**AT Command: AT+CFM** 442 -{{/info}} 327 +AT Command: AT+CFM 443 443 444 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 445 -|=(% colspan="3" style="width: 707px;" %)AT+CFM 446 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response** 447 -|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0((( 329 +|=(% colspan="3" %)AT+CFM 330 +|**Command Example**|**Function**|**Response** 331 +|AT+CFM=?|Get the confirmation mode|0((( 448 448 OK 449 449 ))) 450 -| (% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK451 -| (% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR334 +|AT+CFM=1|Set the confirmation mode|OK 335 +|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR 452 452 453 453 Downlink Command: 0x05 454 454 ... ... @@ -459,82 +459,64 @@ 459 459 * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1 460 460 * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0 461 461 462 - 463 463 == 6.2 Confirm Status == 464 464 465 465 Feature: Get confirmation status of the last AT+SEND (0-1). 466 466 467 -{{info}} 468 -**AT Command: AT+CFS** 469 -{{/info}} 350 +AT Command: AT+CFS 470 470 471 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 472 -|=(% colspan="3" style="width: 531px;" %)AT+CFS 473 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response** 474 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0((( 352 +|=(% colspan="3" %)AT+CFS 353 +|**Command Example**|**Function**|**Response** 354 +|AT+CFS=?|Get confirmation status|0((( 475 475 OK 476 476 ))) 477 477 478 - 479 479 == 6.3 Join LoRa® Network == 480 480 481 481 Feature: Join network. 482 482 483 -{{info}} 484 -**AT Command: AT+JOIN** 485 -{{/info}} 362 +AT Command: AT+JOIN 486 486 487 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %) 488 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN 489 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response** 490 -|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network((( 364 +|=(% colspan="3" %)AT+JOIN 365 +|**Command Example**|**Function**|**Response** 366 +|AT+JOIN ?|Get imformation.|AT+JOIN: Join network((( 491 491 OK 492 492 493 493 While Error in format, return AT_BUSY_ERROR 494 494 ))) 495 495 496 - 497 - 498 498 == 6.4 LoRa® Network Join Mode == 499 499 500 500 Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA). 501 501 502 -{{info}} 503 -**AT Command: AT+NJM** 504 -{{/info}} 376 +AT Command: AT+NJM 505 505 506 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %) 507 -|=(% colspan="3" style="width: 750px;" %)AT+NJM 508 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response** 509 -|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1((( 378 +|=(% colspan="3" %)AT+NJM 379 +|**Command Example**|**Function**|**Response** 380 +|AT+NJM=?|Get the Network Join Mode|1((( 510 510 OK 511 511 ))) 512 -| (% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK513 -| (% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR383 +|AT+NJM=0|Set the Network Join Mode|OK 384 +|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR 514 514 515 -{{info}} 516 -**Downlink Command: 0x20** 517 -{{/info}} 386 +Downlink Command: 0x20 518 518 519 519 Format: Command Code (0x20) followed by 1 bytes mode value. 520 520 521 521 If the downlink payload=2000, it means set the Network Join Mode, while type code is 20. 522 522 523 -* **Example 1:**Downlink Payload:**2000**~/~/ Set AT+NJM=O524 -* **Example 2:**Downlink Payload:**2001**~/~/ Set AT+NJM=1392 +* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O 393 +* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1 525 525 526 526 == 6.5 LoRa® Network Join Status == 527 527 528 528 Feature: LoRa® Network Join Status. 529 529 530 -{{info}} 531 -**AT Command: AT+NJS** 532 -{{/info}} 399 +AT Command: AT+NJS 533 533 534 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %) 535 -|=(% colspan="3" style="width: 495px;" %)AT+NJS 536 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response** 537 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0((( 401 +|=(% colspan="3" %)AT+NJS 402 +|**Command Example**|**Function**|**Response** 403 +|AT+NJS=?|Get the join status.|0((( 538 538 OK 539 539 ))) 540 540 ... ... @@ -542,14 +542,11 @@ 542 542 543 543 Feature: Print Last Received Data in Raw Format<port:data>. 544 544 545 -{{info}} 546 -**AT Command: AT+RECV** 547 -{{/info}} 411 +AT Command: AT+RECV 548 548 549 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 550 -|=(% colspan="3" style="width: 584px;" %)AT+RECV 551 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response** 552 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:((( 413 +|=(% colspan="3" %)AT+RECV 414 +|**Command Example**|**Function**|**Response** 415 +|AT+RECV=?|print last received data in raw format.|0:((( 553 553 OK 554 554 ))) 555 555 ... ... @@ -557,14 +557,11 @@ 557 557 558 558 Feature: Print Last Received Data in Binary Format<port:data>. 559 559 560 -{{info}} 561 -**AT Command: AT+RECVB** 562 -{{/info}} 423 +AT Command: AT+RECVB 563 563 564 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %) 565 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB 566 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response** 567 -|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010((( 425 +|=(% colspan="3" %)AT+RECVB 426 +|**Command Example**|**Function**|**Response** 427 +|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010((( 568 568 OK 569 569 ))) 570 570 ... ... @@ -572,14 +572,11 @@ 572 572 573 573 Feature: Send Text Data<port:data>. 574 574 575 -{{info}} 576 -**AT Command: AT+SEND** 577 -{{/info}} 435 +AT Command: AT+SEND 578 578 579 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %) 580 -|=(% colspan="3" style="width: 988px;" %)AT+SEND 581 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response** 582 -|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK((( 437 +|=(% colspan="3" %)AT+SEND 438 +|**Command Example**|**Function**|**Response** 439 +|AT+SEND=12:hello world|Send text data along with the application port.|OK((( 583 583 While Error in format, return 584 584 585 585 AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED ... ... @@ -591,15 +591,12 @@ 591 591 592 592 Feature: Send hexadecimal data along with the application port. 593 593 594 -{{info}} 595 -**AT Command: AT+SENDB** 596 -{{/info}} 451 +AT Command: AT+SENDB 597 597 598 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %) 599 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB 600 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response** 601 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK 602 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return((( 453 +|=(% colspan="3" %)AT+SENDB 454 +|**Command Example**|**Function**|**Response** 455 +|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK 456 +|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return((( 603 603 AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED 604 604 605 605 ... ... @@ -611,46 +611,39 @@ 611 611 612 612 Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on). 613 613 614 -{{info}} 615 -**AT Command: AT+ADR** 616 -{{/info}} 617 617 618 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %) 619 -|=(% colspan="3" style="width: 680px;" %)AT+ADR 620 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response** 621 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1((( 469 +AT Command: AT+ADR 470 + 471 +|=(% colspan="3" %)AT+ADR 472 +|**Command Example**|**Function**|**Response** 473 +|AT+ADR=?|Get the Adaptive Data Rate setting.|1((( 622 622 OK 623 623 ))) 624 -| (% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK625 -| (% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((476 +|AT+ADR=0|Set the Adaptive Data Rate setting.|OK 477 +|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return((( 626 626 AT_PARAM_ERROR 627 627 ))) 628 628 629 -{{info}} 630 -**Downlink Command: 0x22** 631 -{{/info}} 481 +Downlink Command: 0x22 632 632 633 633 634 634 If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22. 635 635 636 -* **Example 1**: Downlink Payload:**2201**~/~/ Set AT+ADR=1.637 -* **Example 2**: Downlink Payload:**2200FFFF**~/~/ Set AT+ADR=0.486 +* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1. 487 +* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0. 638 638 639 639 == 7.2 LoRa® Class == 640 640 641 641 Feature: Get or Set the Device Class(Currently only support class A, class C). 642 642 643 -{{info}} 644 -**AT Command:AT+CLASS** 645 -{{/info}} 493 +AT Command:AT+CLASS 646 646 647 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %) 648 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS 649 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response** 650 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A((( 495 +|=(% colspan="3" %)AT+CLASS 496 +|**Command Example**|**Function**|**Response** 497 +|AT+CLASS=?|Get the Device Class.|A((( 651 651 OK 652 652 ))) 653 -| (% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((500 +|AT+CLASS=C|Set the Device Class.|OK((( 654 654 655 655 ))) 656 656 ... ... @@ -658,17 +658,14 @@ 658 658 659 659 Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing. 660 660 661 -{{info}} 662 -**AT Command:AT+DCS** 663 -{{/info}} 508 +AT Command:AT+DCS 664 664 665 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %) 666 -|=(% colspan="3" style="width: 512px;" %)AT+DCS 667 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response** 668 -|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1((( 510 +|=(% colspan="3" %)AT+DCS 511 +|**Command Example**|**Function**|**Response** 512 +|AT+DCS=?|Get the ETSI Duty Cycle setting.|1((( 669 669 OK 670 670 ))) 671 -| (% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((515 +|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK((( 672 672 673 673 ))) 674 674 ... ... @@ -676,45 +676,37 @@ 676 676 677 677 Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server 678 678 679 -{{info}} 680 -**AT Command: AT+DR** 681 -{{/info}} 523 +AT Command: AT+DR 682 682 683 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %) 684 -|=(% colspan="3" style="width: 463px;" %)AT+DR 685 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response** 686 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5((( 525 +|=(% colspan="3" %)AT+DR 526 +|**Command Example**|**Function**|**Response** 527 +|AT+DR=?|Get the Data Rate.|5((( 687 687 OK 688 688 ))) 689 -| (% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((530 +|AT+DR=2|Set the Data Rate.|OK((( 690 690 691 691 ))) 692 692 693 -{{info}} 694 -**Downlink Command: 0x2200aaFF** 695 -{{/info}} 534 +Downlink Command: 0x2200aaFF 696 696 697 697 698 698 If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF. 699 699 700 -* **Example 1**: Downlink Payload:**220001FF**~/~/ Set AT+DR=1.701 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+DR=0.539 +* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1. 540 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0. 702 702 703 703 == 7.5 Frame Counter Downlink == 704 704 705 705 Feature: Get or Set the Frame Counter Downlink. 706 706 707 -{{info}} 708 -**AT Command:AT+FCD** 709 -{{/info}} 546 +AT Command:AT+FCD 710 710 711 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %) 712 -|=(% colspan="3" style="width: 690px;" %)AT+FCD 713 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response** 714 -|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0((( 548 +|=(% colspan="3" %)AT+FCD 549 +|**Command Example**|**Function**|**Response** 550 +|AT+FCD=?|Get the Frame Counter Downlink.|0((( 715 715 OK 716 716 ))) 717 -| (% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((553 +|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)((( 718 718 OK 719 719 720 720 ... ... @@ -724,17 +724,14 @@ 724 724 725 725 Feature: Get or Set the Frame Counter Uplink. 726 726 727 -{{info}} 728 -**AT Command:AT+FCU** 729 -{{/info}} 563 +AT Command:AT+FCU 730 730 731 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 732 -|=(% colspan="3" style="width: 531px;" %)AT+FCU 733 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response** 734 -|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0((( 565 +|=(% colspan="3" %)AT+FCU 566 +|**Command Example**|**Function**|**Response** 567 +|AT+FCU=?|Get the Frame Counter Uplink.|0((( 735 735 OK 736 736 ))) 737 -| (% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((570 +|AT+FCU=10|Set the Frame Counter Uplink.|OK((( 738 738 739 739 ))) 740 740 ... ... @@ -742,17 +742,14 @@ 742 742 743 743 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms. 744 744 745 -{{info}} 746 -**AT Command:AT+JN1DL** 747 -{{/info}} 578 +AT Command:AT+JN1DL 748 748 749 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %) 750 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL 751 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response** 752 -|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000((( 580 +|=(% colspan="3" %)AT+JN1DL 581 +|**Command Example**|**Function**|**Response** 582 +|AT+JN1DL=?|Get the Join Accept Delay.|5000((( 753 753 OK 754 754 ))) 755 -| (% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((585 +|AT+JN1DL=10000|Set the Join Accept Delay.|OK((( 756 756 757 757 ))) 758 758 ... ... @@ -760,17 +760,14 @@ 760 760 761 761 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms. 762 762 763 -{{info}} 764 -**AT Command:AT+JN2DL** 765 -{{/info}} 593 +AT Command:AT+JN2DL 766 766 767 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %) 768 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL 769 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response** 770 -|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000((( 595 +|=(% colspan="3" %)AT+JN2DL 596 +|**Command Example**|**Function**|**Response** 597 +|AT+JN2DL=?|Get the Join Accept Delay.|6000((( 771 771 OK 772 772 ))) 773 -| (% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((600 +|AT+JN2DL=20000|Set the Join Accept Delay.|OK((( 774 774 775 775 ))) 776 776 ... ... @@ -778,17 +778,14 @@ 778 778 779 779 Feature: Get or Set the public network mode. (0: off, 1: on) 780 780 781 -{{info}} 782 -**AT Command:AT+PNM** 783 -{{/info}} 608 +AT Command:AT+PNM 784 784 785 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %) 786 -|=(% colspan="3" style="width: 664px;" %)AT+PNM 787 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response** 788 -|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1((( 610 +|=(% colspan="3" %)AT+PNM 611 +|**Command Example**|**Function**|**Response** 612 +|AT+PNM=?|Get the public network mode.|1((( 789 789 OK 790 790 ))) 791 -| (% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((615 +|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)((( 792 792 OK 793 793 794 794 ... ... @@ -798,35 +798,29 @@ 798 798 799 799 Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms 800 800 801 -{{info}} 802 -**AT Command:AT+RX1DL** 803 -{{/info}} 625 +AT Command:AT+RX1DL 804 804 805 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %) 806 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL 807 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response** 808 -|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000((( 627 +|=(% colspan="3" %)AT+RX1DL 628 +|**Command Example**|**Function**|**Response** 629 +|AT+RX1DL=?|Get the delay.|1000((( 809 809 OK 810 810 ))) 811 -| (% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((632 +|AT+RX1DL=1500|Set the delay.|OK((( 812 812 813 813 ))) 814 814 815 -== 7.11 636 +== 7.11Receive Delay2 == 816 816 817 817 Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms 818 818 819 -{{info}} 820 -**AT Command:AT+RX2DL** 821 -{{/info}} 640 +AT Command:AT+RX2DL 822 822 823 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %) 824 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL 825 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response** 826 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000((( 642 +|=(% colspan="3" %)AT+RX2DL 643 +|**Command Example**|**Function**|**Response** 644 +|AT+RX2DL=?|Get the delay.|2000((( 827 827 OK 828 828 ))) 829 -| (% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((647 +|AT+RX2DL=2500|Set the delay.|OK((( 830 830 831 831 ))) 832 832 ... ... @@ -834,17 +834,14 @@ 834 834 835 835 Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X) 836 836 837 -{{info}} 838 -**AT Command:AT+RX2DR** 839 -{{/info}} 655 +AT Command:AT+RX2DR 840 840 841 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %) 842 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR 843 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response** 844 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2((( 657 +|=(% colspan="3" %)AT+RX2DR 658 +|**Command Example**|**Function**|**Response** 659 +|AT+RX2DR=?|Get the Rx2 window data rate.|2((( 845 845 OK 846 846 ))) 847 -| (% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((662 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK((( 848 848 849 849 ))) 850 850 ... ... @@ -852,17 +852,14 @@ 852 852 853 853 Feature: Get or Set the Rx2 window frequency 854 854 855 -{{info}} 856 -**AT Command:AT+RX2FQ** 857 -{{/info}} 670 +AT Command:AT+RX2FQ 858 858 859 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 860 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ 861 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response** 862 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000((( 672 +|=(% colspan="3" %)AT+RX2FQ 673 +|**Command Example**|**Function**|**Response** 674 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000((( 863 863 OK 864 864 ))) 865 -| (% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((677 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK((( 866 866 867 867 ))) 868 868 ... ... @@ -870,17 +870,14 @@ 870 870 871 871 Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. ) 872 872 873 -{{info}} 874 -**AT Command:AT+TXP** 875 -{{/info}} 685 +AT Command:AT+TXP 876 876 877 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %) 878 -|=(% colspan="3" style="width: 462px;" %)AT+TXP 879 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response** 880 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0((( 687 +|=(% colspan="3" %)AT+TXP 688 +|**Command Example**|**Function**|**Response** 689 +|AT+TXP=?|Get the Transmit Power.|0((( 881 881 OK 882 882 ))) 883 -| (% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((692 +|AT+TXP=1|Set the Transmit Power.|OK((( 884 884 885 885 ))) 886 886 ... ... @@ -888,21 +888,18 @@ 888 888 889 889 If the downlink payload=22000100, it means setting the TXP to 0. 890 890 891 -* **Example 1**: Downlink Payload:**22000102**~/~/ Set AT+TXP=2.892 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+TXP=0.700 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2. 701 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0. 893 893 894 894 == 7.15 RSSI of the Last Received Packet == 895 895 896 896 Feature: Get or Set the Rx2 window frequency 897 897 898 -{{info}} 899 -**AT Command:AT+RSSI** 900 -{{/info}} 707 +AT Command:AT+RSSI 901 901 902 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %) 903 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI 904 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response** 905 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0((( 709 +|=(% colspan="3" %)AT+RSSI 710 +|**Command Example**|**Function**|**Response** 711 +|AT+RSSI=?|Get the RSSI of the last received packet.|0((( 906 906 OK 907 907 ))) 908 908 ... ... @@ -910,14 +910,11 @@ 910 910 911 911 Feature: Get the SNR of the last received packet 912 912 913 -{{info}} 914 -**AT Command:AT+SNR** 915 -{{/info}} 719 +AT Command:AT+SNR 916 916 917 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %) 918 -|=(% colspan="3" style="width: 568px;" %)AT+SNR 919 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response** 920 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0((( 721 +|=(% colspan="3" %)AT+SNR 722 +|**Command Example**|**Function**|**Response** 723 +|AT+SNR=?|Get the RSSI of the last received packet.|0((( 921 921 OK 922 922 ))) 923 923 ... ... @@ -925,144 +925,114 @@ 925 925 926 926 Feature: Get or set the application port. 927 927 928 -{{info}} 929 -**AT Command: AT+PORT** 930 -{{/info}} 731 +AT Command: AT+PORT 931 931 932 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %) 933 -|=(% colspan="3" style="width: 497px;" %)AT+PORT 934 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response** 935 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21((( 733 +|=(% colspan="3" %)AT+PORT 734 +|**Command Example**|**Function**|**Response** 735 +|AT+PORT=?|Get the application port|21((( 936 936 OK 937 937 ))) 938 -| (% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK738 +|AT+PORT=21|Set the application port|OK 939 939 940 -{{info}} 941 -**Downlink Command: 0x23** 942 -{{/info}} 740 +Downlink Command: 0x23 943 943 944 944 Format: Command Code (0x23) followed by 1 bytes port value. 945 945 946 946 If the downlink payload=2301, it means set the application port to 1, while type code is 23. 947 947 948 -* **Example 1**: Downlink Payload:**2301**~/~/ set the application port to 1949 -* **Example 2**: Downlink Payload:**2305**~/~/ set the application port to 5746 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1 747 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5 950 950 951 951 == 7.18 Single Channel Mode == 952 952 953 953 Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode. 954 954 955 -{{info}} 956 -**AT Command: AT+CHS** 957 -{{/info}} 753 +AT Command: AT+CHS 958 958 959 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %) 960 -|=(% colspan="3" style="width: 600px;" %)AT+CHS 961 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response** 962 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0((( 755 +|=(% colspan="3" %)AT+CHS 756 +|**Command Example**|**Function**|**Response** 757 +|AT+CHS=?|Get Frequency for Single Channel Mode|0((( 963 963 OK 964 964 ))) 965 -| (% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK760 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK 966 966 967 967 == 7.19 Eight Channel Mode == 968 968 969 969 Feature: Get or Set eight channels mode,Only for US915,AU915,CN470. 970 970 971 -{{info}} 972 -**AT Command: AT+CHE** 973 -{{/info}} 766 +AT Command: AT+CHE 974 974 975 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 976 -|=(% colspan="3" style="width: 707px;" %)AT+CHE 977 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response** 978 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1((( 768 +|=(% colspan="3" %)AT+CHE 769 +|**Command Example**|**Function**|**Response** 770 +|AT+CHE=?|Get eight channels mode|1((( 979 979 902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7 980 980 981 981 OK 982 982 ))) 983 -| (% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK775 +|AT+CHE=1|Set eight channels mode|OK 984 984 985 -{{info}} 986 -**Downlink Command: 0x24** 987 -{{/info}} 777 +Downlink Command: 0x24 988 988 989 989 Format: Command Code (0x24) followed by 1 bytes channel value. 990 990 991 991 If the downlink payload=2401, it means set channel mode to 1, while type code is 24. 992 992 993 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1994 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5783 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1 784 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5 995 995 996 996 == 7.20 Get or Set RXwindows1 timeout == 997 997 998 998 Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255). 999 999 1000 -{{info}} 1001 -**AT Command: AT+RX1WTO** 1002 -{{/info}} 790 +AT Command: AT+RX1WTO 1003 1003 1004 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %) 1005 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO 1006 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response** 1007 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14((( 792 +|=(% colspan="3" %)AT+ RX1WTO 793 +|**Command Example**|**Function**|**Response** 794 +|AT+RX1WTO=?|Get RXwindows1 timeout|14((( 1008 1008 OK 1009 1009 ))) 1010 -| (% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK797 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK 1011 1011 1012 -((( 1013 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1014 -))) 799 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1015 1015 1016 -[[image:image -20220526162535-1.png]]801 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]] 1017 1017 1018 -((( 1019 1019 Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink. 1020 1020 1021 - 1022 -))) 1023 - 1024 1024 == 7.21 Get or Set RXwindows2 timeout == 1025 1025 1026 1026 Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255). 1027 1027 1028 -{{info}} 1029 -**AT Command: AT+RX2WTO** 1030 -{{/info}} 809 +AT Command: AT+RX2WTO 1031 1031 1032 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1033 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO 1034 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response** 1035 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7((( 811 +|=(% colspan="3" %)AT+ RX2WTO 812 +|**Command Example**|**Function**|**Response** 813 +|AT+RX2WTO=?|Get RXwindows2 timeout|7((( 1036 1036 OK 1037 1037 ))) 1038 -| (% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK816 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK 1039 1039 1040 1040 == 7.22 Setting up uplinkdwelltime (as923, au915) == 1041 1041 1042 1042 Feature: Get or Set uplinkdwelltime 1043 1043 1044 -{{info}} 1045 -**AT Command: AT+DWELLT** 1046 -{{/info}} 822 +AT Command: AT+DWELLT 1047 1047 1048 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1049 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT 1050 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response** 1051 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1((( 824 +|=(% colspan="3" %)AT+DWELLT 825 +|**Command Example**|**Function**|**Response** 826 +|AT+DWELLT=?|Get uplinkdwelltime|1((( 1052 1052 OK 1053 1053 ))) 1054 -| (% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK829 +|AT+DWELLT=0|Set uplinkdwelltime|OK 1055 1055 1056 -{{info}} 1057 -**Downlink Command: 0x25** 1058 -{{/info}} 831 +Downlink Command: 0x25 1059 1059 1060 1060 Format: Command Code (0x25) followed by 1 bytes state value. 1061 1061 1062 1062 If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25. 1063 1063 1064 -* **Example 1**: Downlink Payload:**2501**~/~/ set uplinkdwelltime to 11065 -* **Example 2**: Downlink Payload:**2500**~/~/ set uplinkdwelltime to 0837 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1 838 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0 1066 1066 1067 1067 == 7.23 Set Packet Receiving Response Level == 1068 1068 ... ... @@ -1070,11 +1070,11 @@ 1070 1070 1071 1071 RPL value: 1072 1072 1073 -* **AT+RPL=0:**Device won't immediately reply any downlink commands from platform.1074 -* **AT+RPL=1:**Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.1075 -* **AT+RPL=2:**Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.1076 -* **AT+RPL=3:**Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.1077 -* **AT+RPL=4:**Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.846 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform. 847 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00. 848 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command. 849 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command. 850 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands. 1078 1078 1079 1079 Case Analyes: 1080 1080 ... ... @@ -1082,44 +1082,37 @@ 1082 1082 * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command. 1083 1083 * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command. 1084 1084 1085 -{{info}} 1086 -**AT Command: AT+RPL** 1087 -{{/info}} 858 +AT Command: AT+RPL 1088 1088 1089 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %) 1090 -|=(% colspan="3" style="width: 533px;" %)AT+RPL 1091 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response** 1092 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1((( 860 +|=(% colspan="3" %)AT+RPL 861 +|**Command Example**|**Function**|**Response** 862 +|AT+RPL=?|Get packet receiving response level|1((( 1093 1093 OK 1094 1094 ))) 1095 -| (% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK865 +|AT+RPL=0|Set packet receiving response level|OK 1096 1096 1097 -{{info}} 1098 -**Downlink Command: 0x21** 1099 -{{/info}} 867 +Downlink Command: 0x21 1100 1100 1101 1101 Format: Command Code (0x21) followed by 1 bytes level value. 1102 1102 1103 1103 If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21. 1104 1104 1105 -* **Example 1**: Downlink Payload:**2101**~/~/ set packet receiving response level to 11106 -* **Example 2**: Downlink Payload:**2102**~/~/ set packet receiving response level to 2873 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1 874 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2 1107 1107 1108 1108 = 8. AT Commands Combination = 1109 1109 1110 1110 == 8.1 Set a fix RX2DR for downlink window == 1111 1111 1112 -* **AT+ADR=0**~-~-> Disable ADR first1113 -* **AT+RX2DR=xxxx**~-~-> Set xxxx to your wanted DataRate880 +* AT+ADR=0 ~-~-> Disable ADR first 881 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate 1114 1114 1115 1115 == 8.2 Use Downlink Command to set a fix uplink DR == 1116 1116 1117 -{{info}} 1118 -**Downlink Command: 0x22000500** 1119 -{{/info}} 885 +Downlink Command: 0x22000500 1120 1120 1121 1121 Same as: 1122 1122 1123 -* AT+ADR=0 ||anchor="H7.1AdaptiveDataRate"]]1124 -* AT+DR=5 ||anchor="H7.4DataRate"]]1125 -* AT+TXP=0 ||anchor="H7.14TransmitPower"]]889 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]] 890 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]] 891 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
- image-20220511120050-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -136.3 KB - Content
- image-20220526162535-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -149.4 KB - Content