Changes for page End Device AT Commands and Downlink Command
Last modified by kai on 2024/09/06 10:00
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 2 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,9 +1,8 @@ 1 - **Contents：**1 +Contens 2 2 3 3 {{toc/}} 4 4 5 5 6 - 7 7 = 1. Introduction = 8 8 9 9 Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands: ... ... @@ -11,95 +11,48 @@ 11 11 * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device. 12 12 * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device. 13 13 14 -((( 15 15 **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.** 16 16 17 -))) 18 18 19 19 = 2. How to use AT Commands or Downlink command = 20 20 21 21 * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]] 22 22 * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command: 23 -** Use HEX format to send a downlink: [[TTN v3>>Notes 24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes 25 -** See use note for more serves [[Servers Note>>doc :Main.WebHome]](IoT LoRaWANServer)20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]] 21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]]. 22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]] 26 26 27 - 28 28 = 3. Support End Node and firmware version = 29 29 30 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %) 31 -|=(% colspan="3" style="width: 963px;" %)((( 32 -Dragino STM32 base hardware Firmware / LoRaWAN stack list 33 -))) 34 -|(% style="width:187px" %)((( 35 -**Model** 36 -)))|(% style="width:330px" %)((( 37 -**Description** 38 -)))|(% style="width:445px" %)((( 39 -**Firmware Version <~-~-> Stack Version** 40 -))) 41 -|(% style="width:187px" %)((( 42 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]], 43 -)))|(% style="width:330px" %)((( 44 -Open Source Generic LoRaWAN Sensor Node 45 -)))|(% style="width:445px" %)((( 46 -((( 47 -LSN50 v1.6.0 <~-~-> DR-LWS-003; 48 -))) 49 49 50 -((( 51 -((( 27 +(% style="background-color:#ffffcc; color:green; width:1039.22px" %) 28 +|(% colspan="3" style="width:1036px" %)** Dragino STM32 base hardware Firmware / LoRaWAN stack list** 29 +|(% style="width:216px" %)**Model**|(% style="width:346px" %)**Description**|(% style="width:472px" %)**Firmware Version <~-~-> Stack Version** 30 +|(% style="width:216px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:346px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:472px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 52 52 LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 53 53 ))) 54 -))) 55 -))) 56 -|(% style="width:187px" %)((( 57 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]], 58 -)))|(% style="width:330px" %)((( 59 -LoRaWAN GPS Tracker 60 -)))|(% style="width:445px" %)((( 61 -((( 62 -LGT92 v1.6.3 <~-~-> DR-LWS-003; 63 -))) 33 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 34 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 35 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 36 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 64 64 65 -((( 66 -((( 38 + 39 + 40 +(% border="1" style="background-color:#ffffcc; color:green; width:942.222px" %) 41 +|=(% colspan="3" style="width: 939px;" %) Dragino STM32 base hardware Firmware / LoRaWAN stack list 42 +|(% style="width:187px" %)**Model**|(% style="width:306px" %)**Description**|(% style="width:443px" %)**Firmware Version <~-~-> Stack Version** 43 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:306px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:443px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 44 +LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 45 +))) 46 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:306px" %)LoRaWAN GPS Tracker|(% style="width:443px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;((( 67 67 LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version 68 68 ))) 69 -))) 70 -))) 71 -|(% style="width:187px" %)((( 72 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]], 73 -)))|(% style="width:330px" %)((( 74 -LoRaWAN BLE Indoor Tracker 75 -)))|(% style="width:445px" %)((( 76 -LBT1 v1.0 <~-~-> DR-LWS-005; 77 -))) 78 -|(% style="width:187px" %)((( 79 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]], 80 -)))|(% style="width:330px" %)((( 81 -LoRaWAN RS485 Modbus Converter 82 -)))|(% style="width:445px" %)((( 83 -RS485-LN v1.3 <~-~-> DR-LWS-005; 84 -))) 85 -|(% style="width:187px" %)((( 86 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]], 87 -)))|(% style="width:330px" %)((( 88 -LoRaWAN Temperature & Humidity Sensor 89 -)))|(% style="width:445px" %)((( 90 -((( 91 -LHT65 v1.7 <~-~-> DR-LWS-003; 92 -))) 93 - 94 -((( 95 -((( 49 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:306px" %)LoRaWAN BLE Indoor Tracker|(% style="width:443px" %)LBT1 v1.0 <~-~-> DR-LWS-005; 50 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:306px" %)LoRaWAN RS485 Modbus Converter|(% style="width:443px" %)RS485-LN v1.3 <~-~-> DR-LWS-005; 51 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:306px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:443px" %)LHT65 v1.7 <~-~-> DR-LWS-003;((( 96 96 LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version 97 97 ))) 98 -))) 99 -))) 100 100 101 - 102 - 103 103 = 4. System Management Commands = 104 104 105 105 == 4.1 Change Uplink Interval == ... ... @@ -108,11 +108,11 @@ 108 108 109 109 (% class="box infomessage" %) 110 110 ((( 111 - **AT Command: AT+TDC**63 +AT Command: AT+TDC 112 112 ))) 113 113 114 114 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 115 -|=(% colspan="3" style="width: 724px;" %)AT+TDC 67 +|=(% colspan="3" style="width: 724px;" %) AT+TDC 116 116 |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response** 117 117 |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000((( 118 118 OK ... ... @@ -123,34 +123,27 @@ 123 123 Set transmit interval to 60000ms = 60 seconds 124 124 ))) 125 125 126 -{{info}} 127 127 **Downlink Command: 0x01** 128 -{{/info}} 129 129 130 -((( 131 131 Format: Command Code (0x01) followed by 3 bytes time value. 132 -))) 133 133 134 -((( 135 135 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01. 136 -))) 137 137 138 138 * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds 139 139 * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds 140 140 141 - 142 - 143 143 == 4.2 Reboot End Node == 144 144 145 145 Feature: Reboot End Node to perform a new OTAA or ABP Join. 146 146 147 147 {{info}} 148 - **AT Command: ATZ**92 +AT Command: ATZ 149 149 {{/info}} 150 150 151 151 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 152 -|=(% colspan="3" %)ATZ: Trig a reset of the MCU 96 +|=(% colspan="3" %) ATZ: Trig a reset of the MCU 153 153 |**Command Example**|**Function**|**Response** 98 +~)~)~) 154 154 |ATZ|Reset MCU|((( 155 155 Device reset and show booting info 156 156 ... ... @@ -165,56 +165,35 @@ 165 165 <followed by the Tx and Rx information> 166 166 ))) 167 167 168 -{{info}} 169 -**Downlink Command: 0x04** 170 -{{/info}} 113 +Downlink Command: 0x04 171 171 172 -((( 173 173 Format: Command Code (0x04) followed by FF. 174 -))) 175 175 176 -((( 177 -If the downlink payload=**04FF**, the end node will reboot. 117 +If the downlink payload=04FF, the end node will reboot. 178 178 179 - 180 -))) 181 - 182 182 == 4.3 Reset to factory Default == 183 183 184 184 Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command. 185 185 186 -{{info}} 187 -**AT Command: AT+FDR** 188 -{{/info}} 123 +AT Command: AT+FDR 189 189 190 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %) 191 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default 192 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response** 193 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)((( 194 -Device reset to factory default parameters and show booting info 125 +|=(% colspan="3" %)Reset to factory default 126 +|**Command Example**|**Function**|**Response** 127 +|AT+FDR|Reset to factory default|Device reset to factory default parameters and show booting info 195 195 196 -LSN50 Device/LoRa ST Module 197 - 129 +{{{LSN50 Device/LoRa ST Module 198 198 Image Version: XX 199 - 200 200 Frequency Band: XX 201 - 202 202 DevEui= XX XX XX XX XX XX XX XX 203 - 204 204 Please set the parameters or reset Device to apply change 205 - )))134 +}}} 206 206 207 -{{info}} 208 -**Downlink Command: 0x04** 209 -{{/info}} 210 210 211 -((( 137 +Downlink Command: 0x04 138 + 212 212 Format: Command Code (0x04) followed by FE. 213 -))) 214 214 215 -((( 216 -If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve. 217 -))) 141 +If the downlink payload=04FE, Reset Parameters to Factory Default, Keys Reserve. 218 218 219 219 220 220 == 4.4 Show Firmware Version == ... ... @@ -221,42 +221,30 @@ 221 221 222 222 Feature: Show firmware version. No downlink command yet. 223 223 224 -{{info}} 225 -**AT Command: AT+VER** 226 -{{/info}} 148 +AT Command: AT+VER 227 227 228 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %) 229 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band 230 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response** 231 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)((( 232 -1.3 EU868 150 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band 151 +|**Command Example**|**Function**|**Response** 152 +|AT+VER=?|Show Image version and Frequency Band| 233 233 154 +{{{1.3 EU868 234 234 OK 235 - )))156 +}}} 236 236 237 -{{info}} 238 -**Downlink Command: 0x26 (Valid in 006 stack)** 239 -{{/info}} 240 240 241 -((( 159 +Downlink Command: 0x26 (Valid in 006 stack) 160 + 242 242 Downlink Format: 0x26 243 -))) 244 244 245 -((( 246 246 Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes 247 -))) 248 248 249 -((( 250 -**xx: Software Type:** 251 -))) 165 +xx: Software Type: 252 252 253 253 * 0x00 01: LGT92 Version 254 254 * 0x00 02: LBT1 255 255 * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01 256 256 257 -((( 258 -**yy: Frequency Band:** 259 -))) 171 +yy: Frequency Band: 260 260 261 261 * 0x01: EU868 262 262 * 0x02: US915 ... ... @@ -269,9 +269,7 @@ 269 269 * 0x09: AS923-2 270 270 * 0xa0: AS923-3 271 271 272 -((( 273 -**zz: Subband** 274 -))) 184 +zz: Subband 275 275 276 276 firmware version: v1.1.0 ~-~-> 110 277 277 ... ... @@ -280,29 +280,21 @@ 280 280 281 281 Feature: Show All configure. No downlink command yet. 282 282 283 -{{info}} 284 -**AT Command: AT+CFG** 285 -{{/info}} 193 +AT Command: AT+CFG 286 286 287 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %) 288 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations 289 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response** 290 -|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)((( 291 -AT+DEUI = XX XX XX XX XX XX XX XX 195 +|=(% colspan="3" %)AT+CFG: Print all configurations 196 +|**Command Example**|**Function**|**Response** 197 +|AT+CFG|Show all configures| 292 292 199 +{{{AT+DEUI = XX XX XX XX XX XX XX XX 293 293 AT+DADDR=XXXXXXXX 294 - 295 295 ………. 296 - 297 297 AT+RX2WTO=X 298 - 299 299 AT+CHS=868100000 300 - 301 301 OK 302 - )))205 +}}} 303 303 304 304 305 - 306 306 = 5. Keys, IDs and EUIs management = 307 307 308 308 == 5.1 Application EUI == ... ... @@ -309,128 +309,99 @@ 309 309 310 310 Feature: Get or Set the Application EUI. 311 311 312 -{{info}} 313 -**AT Command: AT+APPEUI** 314 -{{/info}} 214 +AT Command: AT+APPEUI 315 315 316 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %) 317 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI 318 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response** 319 -|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00((( 216 +|=(% colspan="3" %)AT+APPEUI 217 +|**Command Example**|**Function**|**Response** 218 +|AT+APPEUI=?|Get the Application EUI|00 b3 d5 00 00 00 00 00((( 320 320 OK 321 321 ))) 322 -| (% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK221 +|AT+APPEUI=00 b3 d5 7e f0 00 4d 34|Set the Application EUI|OK 323 323 324 - 325 - 326 326 == 5.2 Application Key == 327 327 328 328 Feature: Get or Set the Application Key. 329 329 330 -{{info}} 331 -**AT Command: AT+APPKEY** 332 -{{/info}} 227 +AT Command: AT+APPKEY 333 333 334 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %) 335 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY 336 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response** 337 -|(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 229 +|=(% colspan="3" %)AT+APPKEY 230 +|**Command Example**|**Function**|**Response** 231 +|AT+APPKEY=?|Get the Application Key|00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 338 338 OK 339 339 ))) 340 -| (% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK234 +|AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|Set the Application Key.|OK 341 341 342 - 343 343 == 5.3 Application Session Key == 344 344 345 345 Feature: Get or Set the Application Session Key. 346 346 347 -{{info}} 348 -**AT Command: AT+APPSKEY** 349 -{{/info}} 240 +AT Command: AT+APPSKEY 350 350 351 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %) 352 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY 353 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response** 354 -|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 242 +|=(% colspan="3" %)AT+APPSKEY 243 +|**Command Example**|**Function**|**Response** 244 +|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 355 355 OK 356 356 ))) 357 -| (% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)(((247 +|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 358 358 OK 359 359 ))) 360 360 361 - 362 362 == 5.4 Device Address == 363 363 364 364 Feature: Get or Set the Device Address. 365 365 366 -{{info}} 367 -**AT Command: AT+DADDR** 368 -{{/info}} 255 +AT Command: AT+DADDR 369 369 370 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %) 371 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR 372 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response** 373 -|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)((( 257 +|=(% colspan="3" %)AT+DADDR 258 +|**Command Example**|**Function**|**Response** 259 +|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 374 374 A8 40 41 FF 375 375 376 376 OK 377 377 ))) 378 -| (% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK264 +|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK 379 379 380 - 381 381 == 5.5 Device EUI == 382 382 383 383 Feature: Get or Set the Device EUI. 384 384 385 -{{info}} 386 -**AT Command: AT+DEUI** 387 -{{/info}} 270 +AT Command: AT+DEUI 388 388 389 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %) 390 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI 391 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response** 392 -|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55((( 272 +|=(% colspan="3" %)AT+DEUI 273 +|**Command Example**|**Function**|**Response** 274 +|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55((( 393 393 OK 394 394 ))) 395 -| (% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((277 +|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)((( 396 396 OK 397 397 ))) 398 398 399 - 400 400 == 5.6 Network ID == 401 401 402 402 Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection) 403 403 404 -{{info}} 405 -**AT Command: AT+NWKID** 406 -{{/info}} 285 +AT Command: AT+NWKID 407 407 408 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %) 409 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID 410 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response** 411 -|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff((( 287 +|=(% colspan="3" %)AT+NWKID 288 +|**Command Example**|**Function**|**Response** 289 +|AT+NWKID=?|Get the Network ID.|a8 40 41 ff((( 412 412 OK 413 413 ))) 414 -| (% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK292 +|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK 415 415 416 - 417 417 == 5.7 Network Session Key == 418 418 419 419 Feature: Get or Set the Network Session Key 420 420 421 -{{info}} 422 -**AT Command: AT+NWKSKEY** 423 -{{/info}} 298 +AT Command: AT+NWKSKEY 424 424 425 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %) 426 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY 427 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response** 428 -|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 300 +|=(% colspan="3" %)AT+NWKSKEY 301 +|**Command Example**|**Function**|**Response** 302 +|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 429 429 OK 430 430 ))) 431 -| (% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK305 +|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK 432 432 433 - 434 434 = 6. Joining and sending date on LoRaWAN network = 435 435 436 436 == 6.1 Confirm Mode == ... ... @@ -437,18 +437,15 @@ 437 437 438 438 Feature: Get or Set the confirmation mode (0-1). 439 439 440 -{{info}} 441 -**AT Command: AT+CFM** 442 -{{/info}} 313 +AT Command: AT+CFM 443 443 444 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 445 -|=(% colspan="3" style="width: 707px;" %)AT+CFM 446 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response** 447 -|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0((( 315 +|=(% colspan="3" %)AT+CFM 316 +|**Command Example**|**Function**|**Response** 317 +|AT+CFM=?|Get the confirmation mode|0((( 448 448 OK 449 449 ))) 450 -| (% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK451 -| (% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR320 +|AT+CFM=1|Set the confirmation mode|OK 321 +|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR 452 452 453 453 Downlink Command: 0x05 454 454 ... ... @@ -459,35 +459,27 @@ 459 459 * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1 460 460 * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0 461 461 462 - 463 463 == 6.2 Confirm Status == 464 464 465 465 Feature: Get confirmation status of the last AT+SEND (0-1). 466 466 467 -{{info}} 468 -**AT Command: AT+CFS** 469 -{{/info}} 336 +AT Command: AT+CFS 470 470 471 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 472 -|=(% colspan="3" style="width: 531px;" %)AT+CFS 473 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response** 474 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0((( 338 +|=(% colspan="3" %)AT+CFS 339 +|**Command Example**|**Function**|**Response** 340 +|AT+CFS=?|Get confirmation status|0((( 475 475 OK 476 476 ))) 477 477 478 - 479 479 == 6.3 Join LoRa® Network == 480 480 481 481 Feature: Join network. 482 482 483 -{{info}} 484 -**AT Command: AT+JOIN** 485 -{{/info}} 348 +AT Command: AT+JOIN 486 486 487 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %) 488 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN 489 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response** 490 -|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network((( 350 +|=(% colspan="3" %)AT+JOIN 351 +|**Command Example**|**Function**|**Response** 352 +|AT+JOIN ?|Get imformation.|AT+JOIN: Join network((( 491 491 OK 492 492 493 493 While Error in format, return AT_BUSY_ERROR ... ... @@ -497,42 +497,34 @@ 497 497 498 498 Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA). 499 499 500 -{{info}} 501 -**AT Command: AT+NJM** 502 -{{/info}} 362 +AT Command: AT+NJM 503 503 504 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %) 505 -|=(% colspan="3" style="width: 750px;" %)AT+NJM 506 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response** 507 -|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1((( 364 +|=(% colspan="3" %)AT+NJM 365 +|**Command Example**|**Function**|**Response** 366 +|AT+NJM=?|Get the Network Join Mode|1((( 508 508 OK 509 509 ))) 510 -| (% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK511 -| (% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR369 +|AT+NJM=0|Set the Network Join Mode|OK 370 +|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR 512 512 513 -{{info}} 514 -**Downlink Command: 0x20** 515 -{{/info}} 372 +Downlink Command: 0x20 516 516 517 517 Format: Command Code (0x20) followed by 1 bytes mode value. 518 518 519 519 If the downlink payload=2000, it means set the Network Join Mode, while type code is 20. 520 520 521 -* **Example 1:**Downlink Payload:**2000**~/~/ Set AT+NJM=O522 -* **Example 2:**Downlink Payload:**2001**~/~/ Set AT+NJM=1378 +* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O 379 +* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1 523 523 524 524 == 6.5 LoRa® Network Join Status == 525 525 526 526 Feature: LoRa® Network Join Status. 527 527 528 -{{info}} 529 -**AT Command: AT+NJS** 530 -{{/info}} 385 +AT Command: AT+NJS 531 531 532 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %) 533 -|=(% colspan="3" style="width: 495px;" %)AT+NJS 534 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response** 535 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0((( 387 +|=(% colspan="3" %)AT+NJS 388 +|**Command Example**|**Function**|**Response** 389 +|AT+NJS=?|Get the join status.|0((( 536 536 OK 537 537 ))) 538 538 ... ... @@ -540,14 +540,11 @@ 540 540 541 541 Feature: Print Last Received Data in Raw Format<port:data>. 542 542 543 -{{info}} 544 -**AT Command: AT+RECV** 545 -{{/info}} 397 +AT Command: AT+RECV 546 546 547 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 548 -|=(% colspan="3" style="width: 584px;" %)AT+RECV 549 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response** 550 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:((( 399 +|=(% colspan="3" %)AT+RECV 400 +|**Command Example**|**Function**|**Response** 401 +|AT+RECV=?|print last received data in raw format.|0:((( 551 551 OK 552 552 ))) 553 553 ... ... @@ -555,14 +555,11 @@ 555 555 556 556 Feature: Print Last Received Data in Binary Format<port:data>. 557 557 558 -{{info}} 559 -**AT Command: AT+RECVB** 560 -{{/info}} 409 +AT Command: AT+RECVB 561 561 562 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %) 563 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB 564 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response** 565 -|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010((( 411 +|=(% colspan="3" %)AT+RECVB 412 +|**Command Example**|**Function**|**Response** 413 +|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010((( 566 566 OK 567 567 ))) 568 568 ... ... @@ -570,14 +570,11 @@ 570 570 571 571 Feature: Send Text Data<port:data>. 572 572 573 -{{info}} 574 -**AT Command: AT+SEND** 575 -{{/info}} 421 +AT Command: AT+SEND 576 576 577 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %) 578 -|=(% colspan="3" style="width: 988px;" %)AT+SEND 579 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response** 580 -|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK((( 423 +|=(% colspan="3" %)AT+SEND 424 +|**Command Example**|**Function**|**Response** 425 +|AT+SEND=12:hello world|Send text data along with the application port.|OK((( 581 581 While Error in format, return 582 582 583 583 AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED ... ... @@ -589,15 +589,12 @@ 589 589 590 590 Feature: Send hexadecimal data along with the application port. 591 591 592 -{{info}} 593 -**AT Command: AT+SENDB** 594 -{{/info}} 437 +AT Command: AT+SENDB 595 595 596 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %) 597 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB 598 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response** 599 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK 600 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return((( 439 +|=(% colspan="3" %)AT+SENDB 440 +|**Command Example**|**Function**|**Response** 441 +|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK 442 +|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return((( 601 601 AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED 602 602 603 603 ... ... @@ -609,46 +609,39 @@ 609 609 610 610 Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on). 611 611 612 -{{info}} 613 -**AT Command: AT+ADR** 614 -{{/info}} 615 615 616 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %) 617 -|=(% colspan="3" style="width: 680px;" %)AT+ADR 618 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response** 619 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1((( 455 +AT Command: AT+ADR 456 + 457 +|=(% colspan="3" %)AT+ADR 458 +|**Command Example**|**Function**|**Response** 459 +|AT+ADR=?|Get the Adaptive Data Rate setting.|1((( 620 620 OK 621 621 ))) 622 -| (% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK623 -| (% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((462 +|AT+ADR=0|Set the Adaptive Data Rate setting.|OK 463 +|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return((( 624 624 AT_PARAM_ERROR 625 625 ))) 626 626 627 -{{info}} 628 -**Downlink Command: 0x22** 629 -{{/info}} 467 +Downlink Command: 0x22 630 630 631 631 632 632 If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22. 633 633 634 -* **Example 1**: Downlink Payload:**2201**~/~/ Set AT+ADR=1.635 -* **Example 2**: Downlink Payload:**2200FFFF**~/~/ Set AT+ADR=0.472 +* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1. 473 +* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0. 636 636 637 637 == 7.2 LoRa® Class == 638 638 639 639 Feature: Get or Set the Device Class(Currently only support class A, class C). 640 640 641 -{{info}} 642 -**AT Command:AT+CLASS** 643 -{{/info}} 479 +AT Command:AT+CLASS 644 644 645 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %) 646 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS 647 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response** 648 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A((( 481 +|=(% colspan="3" %)AT+CLASS 482 +|**Command Example**|**Function**|**Response** 483 +|AT+CLASS=?|Get the Device Class.|A((( 649 649 OK 650 650 ))) 651 -| (% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((486 +|AT+CLASS=C|Set the Device Class.|OK((( 652 652 653 653 ))) 654 654 ... ... @@ -656,17 +656,14 @@ 656 656 657 657 Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing. 658 658 659 -{{info}} 660 -**AT Command:AT+DCS** 661 -{{/info}} 494 +AT Command:AT+DCS 662 662 663 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %) 664 -|=(% colspan="3" style="width: 512px;" %)AT+DCS 665 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response** 666 -|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1((( 496 +|=(% colspan="3" %)AT+DCS 497 +|**Command Example**|**Function**|**Response** 498 +|AT+DCS=?|Get the ETSI Duty Cycle setting.|1((( 667 667 OK 668 668 ))) 669 -| (% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((501 +|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK((( 670 670 671 671 ))) 672 672 ... ... @@ -674,45 +674,37 @@ 674 674 675 675 Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server 676 676 677 -{{info}} 678 -**AT Command: AT+DR** 679 -{{/info}} 509 +AT Command: AT+DR 680 680 681 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %) 682 -|=(% colspan="3" style="width: 463px;" %)AT+DR 683 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response** 684 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5((( 511 +|=(% colspan="3" %)AT+DR 512 +|**Command Example**|**Function**|**Response** 513 +|AT+DR=?|Get the Data Rate.|5((( 685 685 OK 686 686 ))) 687 -| (% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((516 +|AT+DR=2|Set the Data Rate.|OK((( 688 688 689 689 ))) 690 690 691 -{{info}} 692 -**Downlink Command: 0x2200aaFF** 693 -{{/info}} 520 +Downlink Command: 0x2200aaFF 694 694 695 695 696 696 If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF. 697 697 698 -* **Example 1**: Downlink Payload:**220001FF**~/~/ Set AT+DR=1.699 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+DR=0.525 +* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1. 526 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0. 700 700 701 701 == 7.5 Frame Counter Downlink == 702 702 703 703 Feature: Get or Set the Frame Counter Downlink. 704 704 705 -{{info}} 706 -**AT Command:AT+FCD** 707 -{{/info}} 532 +AT Command:AT+FCD 708 708 709 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %) 710 -|=(% colspan="3" style="width: 690px;" %)AT+FCD 711 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response** 712 -|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0((( 534 +|=(% colspan="3" %)AT+FCD 535 +|**Command Example**|**Function**|**Response** 536 +|AT+FCD=?|Get the Frame Counter Downlink.|0((( 713 713 OK 714 714 ))) 715 -| (% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((539 +|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)((( 716 716 OK 717 717 718 718 ... ... @@ -722,17 +722,14 @@ 722 722 723 723 Feature: Get or Set the Frame Counter Uplink. 724 724 725 -{{info}} 726 -**AT Command:AT+FCU** 727 -{{/info}} 549 +AT Command:AT+FCU 728 728 729 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 730 -|=(% colspan="3" style="width: 531px;" %)AT+FCU 731 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response** 732 -|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0((( 551 +|=(% colspan="3" %)AT+FCU 552 +|**Command Example**|**Function**|**Response** 553 +|AT+FCU=?|Get the Frame Counter Uplink.|0((( 733 733 OK 734 734 ))) 735 -| (% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((556 +|AT+FCU=10|Set the Frame Counter Uplink.|OK((( 736 736 737 737 ))) 738 738 ... ... @@ -740,17 +740,14 @@ 740 740 741 741 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms. 742 742 743 -{{info}} 744 -**AT Command:AT+JN1DL** 745 -{{/info}} 564 +AT Command:AT+JN1DL 746 746 747 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %) 748 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL 749 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response** 750 -|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000((( 566 +|=(% colspan="3" %)AT+JN1DL 567 +|**Command Example**|**Function**|**Response** 568 +|AT+JN1DL=?|Get the Join Accept Delay.|5000((( 751 751 OK 752 752 ))) 753 -| (% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((571 +|AT+JN1DL=10000|Set the Join Accept Delay.|OK((( 754 754 755 755 ))) 756 756 ... ... @@ -758,17 +758,14 @@ 758 758 759 759 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms. 760 760 761 -{{info}} 762 -**AT Command:AT+JN2DL** 763 -{{/info}} 579 +AT Command:AT+JN2DL 764 764 765 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %) 766 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL 767 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response** 768 -|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000((( 581 +|=(% colspan="3" %)AT+JN2DL 582 +|**Command Example**|**Function**|**Response** 583 +|AT+JN2DL=?|Get the Join Accept Delay.|6000((( 769 769 OK 770 770 ))) 771 -| (% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((586 +|AT+JN2DL=20000|Set the Join Accept Delay.|OK((( 772 772 773 773 ))) 774 774 ... ... @@ -776,17 +776,14 @@ 776 776 777 777 Feature: Get or Set the public network mode. (0: off, 1: on) 778 778 779 -{{info}} 780 -**AT Command:AT+PNM** 781 -{{/info}} 594 +AT Command:AT+PNM 782 782 783 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %) 784 -|=(% colspan="3" style="width: 664px;" %)AT+PNM 785 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response** 786 -|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1((( 596 +|=(% colspan="3" %)AT+PNM 597 +|**Command Example**|**Function**|**Response** 598 +|AT+PNM=?|Get the public network mode.|1((( 787 787 OK 788 788 ))) 789 -| (% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((601 +|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)((( 790 790 OK 791 791 792 792 ... ... @@ -796,35 +796,29 @@ 796 796 797 797 Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms 798 798 799 -{{info}} 800 -**AT Command:AT+RX1DL** 801 -{{/info}} 611 +AT Command:AT+RX1DL 802 802 803 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %) 804 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL 805 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response** 806 -|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000((( 613 +|=(% colspan="3" %)AT+RX1DL 614 +|**Command Example**|**Function**|**Response** 615 +|AT+RX1DL=?|Get the delay.|1000((( 807 807 OK 808 808 ))) 809 -| (% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((618 +|AT+RX1DL=1500|Set the delay.|OK((( 810 810 811 811 ))) 812 812 813 -== 7.11 622 +== 7.11Receive Delay2 == 814 814 815 815 Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms 816 816 817 -{{info}} 818 -**AT Command:AT+RX2DL** 819 -{{/info}} 626 +AT Command:AT+RX2DL 820 820 821 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %) 822 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL 823 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response** 824 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000((( 628 +|=(% colspan="3" %)AT+RX2DL 629 +|**Command Example**|**Function**|**Response** 630 +|AT+RX2DL=?|Get the delay.|2000((( 825 825 OK 826 826 ))) 827 -| (% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((633 +|AT+RX2DL=2500|Set the delay.|OK((( 828 828 829 829 ))) 830 830 ... ... @@ -832,17 +832,14 @@ 832 832 833 833 Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X) 834 834 835 -{{info}} 836 -**AT Command:AT+RX2DR** 837 -{{/info}} 641 +AT Command:AT+RX2DR 838 838 839 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %) 840 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR 841 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response** 842 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2((( 643 +|=(% colspan="3" %)AT+RX2DR 644 +|**Command Example**|**Function**|**Response** 645 +|AT+RX2DR=?|Get the Rx2 window data rate.|2((( 843 843 OK 844 844 ))) 845 -| (% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((648 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK((( 846 846 847 847 ))) 848 848 ... ... @@ -850,17 +850,14 @@ 850 850 851 851 Feature: Get or Set the Rx2 window frequency 852 852 853 -{{info}} 854 -**AT Command:AT+RX2FQ** 855 -{{/info}} 656 +AT Command:AT+RX2FQ 856 856 857 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 858 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ 859 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response** 860 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000((( 658 +|=(% colspan="3" %)AT+RX2FQ 659 +|**Command Example**|**Function**|**Response** 660 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000((( 861 861 OK 862 862 ))) 863 -| (% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((663 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK((( 864 864 865 865 ))) 866 866 ... ... @@ -868,17 +868,14 @@ 868 868 869 869 Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. ) 870 870 871 -{{info}} 872 -**AT Command:AT+TXP** 873 -{{/info}} 671 +AT Command:AT+TXP 874 874 875 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %) 876 -|=(% colspan="3" style="width: 462px;" %)AT+TXP 877 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response** 878 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0((( 673 +|=(% colspan="3" %)AT+TXP 674 +|**Command Example**|**Function**|**Response** 675 +|AT+TXP=?|Get the Transmit Power.|0((( 879 879 OK 880 880 ))) 881 -| (% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((678 +|AT+TXP=1|Set the Transmit Power.|OK((( 882 882 883 883 ))) 884 884 ... ... @@ -886,21 +886,18 @@ 886 886 887 887 If the downlink payload=22000100, it means setting the TXP to 0. 888 888 889 -* **Example 1**: Downlink Payload:**22000102**~/~/ Set AT+TXP=2.890 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+TXP=0.686 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2. 687 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0. 891 891 892 892 == 7.15 RSSI of the Last Received Packet == 893 893 894 894 Feature: Get or Set the Rx2 window frequency 895 895 896 -{{info}} 897 -**AT Command:AT+RSSI** 898 -{{/info}} 693 +AT Command:AT+RSSI 899 899 900 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %) 901 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI 902 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response** 903 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0((( 695 +|=(% colspan="3" %)AT+RSSI 696 +|**Command Example**|**Function**|**Response** 697 +|AT+RSSI=?|Get the RSSI of the last received packet.|0((( 904 904 OK 905 905 ))) 906 906 ... ... @@ -908,14 +908,11 @@ 908 908 909 909 Feature: Get the SNR of the last received packet 910 910 911 -{{info}} 912 -**AT Command:AT+SNR** 913 -{{/info}} 705 +AT Command:AT+SNR 914 914 915 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %) 916 -|=(% colspan="3" style="width: 568px;" %)AT+SNR 917 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response** 918 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0((( 707 +|=(% colspan="3" %)AT+SNR 708 +|**Command Example**|**Function**|**Response** 709 +|AT+SNR=?|Get the RSSI of the last received packet.|0((( 919 919 OK 920 920 ))) 921 921 ... ... @@ -923,144 +923,114 @@ 923 923 924 924 Feature: Get or set the application port. 925 925 926 -{{info}} 927 -**AT Command: AT+PORT** 928 -{{/info}} 717 +AT Command: AT+PORT 929 929 930 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %) 931 -|=(% colspan="3" style="width: 497px;" %)AT+PORT 932 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response** 933 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21((( 719 +|=(% colspan="3" %)AT+PORT 720 +|**Command Example**|**Function**|**Response** 721 +|AT+PORT=?|Get the application port|21((( 934 934 OK 935 935 ))) 936 -| (% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK724 +|AT+PORT=21|Set the application port|OK 937 937 938 -{{info}} 939 -**Downlink Command: 0x23** 940 -{{/info}} 726 +Downlink Command: 0x23 941 941 942 942 Format: Command Code (0x23) followed by 1 bytes port value. 943 943 944 944 If the downlink payload=2301, it means set the application port to 1, while type code is 23. 945 945 946 -* **Example 1**: Downlink Payload:**2301**~/~/ set the application port to 1947 -* **Example 2**: Downlink Payload:**2305**~/~/ set the application port to 5732 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1 733 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5 948 948 949 949 == 7.18 Single Channel Mode == 950 950 951 951 Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode. 952 952 953 -{{info}} 954 -**AT Command: AT+CHS** 955 -{{/info}} 739 +AT Command: AT+CHS 956 956 957 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %) 958 -|=(% colspan="3" style="width: 600px;" %)AT+CHS 959 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response** 960 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0((( 741 +|=(% colspan="3" %)AT+CHS 742 +|**Command Example**|**Function**|**Response** 743 +|AT+CHS=?|Get Frequency for Single Channel Mode|0((( 961 961 OK 962 962 ))) 963 -| (% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK746 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK 964 964 965 965 == 7.19 Eight Channel Mode == 966 966 967 967 Feature: Get or Set eight channels mode,Only for US915,AU915,CN470. 968 968 969 -{{info}} 970 -**AT Command: AT+CHE** 971 -{{/info}} 752 +AT Command: AT+CHE 972 972 973 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 974 -|=(% colspan="3" style="width: 707px;" %)AT+CHE 975 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response** 976 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1((( 754 +|=(% colspan="3" %)AT+CHE 755 +|**Command Example**|**Function**|**Response** 756 +|AT+CHE=?|Get eight channels mode|1((( 977 977 902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7 978 978 979 979 OK 980 980 ))) 981 -| (% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK761 +|AT+CHE=1|Set eight channels mode|OK 982 982 983 -{{info}} 984 -**Downlink Command: 0x24** 985 -{{/info}} 763 +Downlink Command: 0x24 986 986 987 987 Format: Command Code (0x24) followed by 1 bytes channel value. 988 988 989 989 If the downlink payload=2401, it means set channel mode to 1, while type code is 24. 990 990 991 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1992 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5769 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1 770 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5 993 993 994 994 == 7.20 Get or Set RXwindows1 timeout == 995 995 996 996 Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255). 997 997 998 -{{info}} 999 -**AT Command: AT+RX1WTO** 1000 -{{/info}} 776 +AT Command: AT+RX1WTO 1001 1001 1002 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %) 1003 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO 1004 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response** 1005 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14((( 778 +|=(% colspan="3" %)AT+ RX1WTO 779 +|**Command Example**|**Function**|**Response** 780 +|AT+RX1WTO=?|Get RXwindows1 timeout|14((( 1006 1006 OK 1007 1007 ))) 1008 -| (% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK783 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK 1009 1009 1010 -((( 1011 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1012 -))) 785 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1013 1013 1014 -[[image:image -20220526162535-1.png]]787 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]] 1015 1015 1016 -((( 1017 1017 Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink. 1018 1018 1019 - 1020 -))) 1021 - 1022 1022 == 7.21 Get or Set RXwindows2 timeout == 1023 1023 1024 1024 Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255). 1025 1025 1026 -{{info}} 1027 -**AT Command: AT+RX2WTO** 1028 -{{/info}} 795 +AT Command: AT+RX2WTO 1029 1029 1030 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1031 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO 1032 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response** 1033 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7((( 797 +|=(% colspan="3" %)AT+ RX2WTO 798 +|**Command Example**|**Function**|**Response** 799 +|AT+RX2WTO=?|Get RXwindows2 timeout|7((( 1034 1034 OK 1035 1035 ))) 1036 -| (% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK802 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK 1037 1037 1038 1038 == 7.22 Setting up uplinkdwelltime (as923, au915) == 1039 1039 1040 1040 Feature: Get or Set uplinkdwelltime 1041 1041 1042 -{{info}} 1043 -**AT Command: AT+DWELLT** 1044 -{{/info}} 808 +AT Command: AT+DWELLT 1045 1045 1046 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1047 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT 1048 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response** 1049 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1((( 810 +|=(% colspan="3" %)AT+DWELLT 811 +|**Command Example**|**Function**|**Response** 812 +|AT+DWELLT=?|Get uplinkdwelltime|1((( 1050 1050 OK 1051 1051 ))) 1052 -| (% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK815 +|AT+DWELLT=0|Set uplinkdwelltime|OK 1053 1053 1054 -{{info}} 1055 -**Downlink Command: 0x25** 1056 -{{/info}} 817 +Downlink Command: 0x25 1057 1057 1058 1058 Format: Command Code (0x25) followed by 1 bytes state value. 1059 1059 1060 1060 If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25. 1061 1061 1062 -* **Example 1**: Downlink Payload:**2501**~/~/ set uplinkdwelltime to 11063 -* **Example 2**: Downlink Payload:**2500**~/~/ set uplinkdwelltime to 0823 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1 824 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0 1064 1064 1065 1065 == 7.23 Set Packet Receiving Response Level == 1066 1066 ... ... @@ -1068,11 +1068,11 @@ 1068 1068 1069 1069 RPL value: 1070 1070 1071 -* **AT+RPL=0:**Device won't immediately reply any downlink commands from platform.1072 -* **AT+RPL=1:**Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.1073 -* **AT+RPL=2:**Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.1074 -* **AT+RPL=3:**Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.1075 -* **AT+RPL=4:**Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.832 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform. 833 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00. 834 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command. 835 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command. 836 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands. 1076 1076 1077 1077 Case Analyes: 1078 1078 ... ... @@ -1080,44 +1080,37 @@ 1080 1080 * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command. 1081 1081 * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command. 1082 1082 1083 -{{info}} 1084 -**AT Command: AT+RPL** 1085 -{{/info}} 844 +AT Command: AT+RPL 1086 1086 1087 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %) 1088 -|=(% colspan="3" style="width: 533px;" %)AT+RPL 1089 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response** 1090 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1((( 846 +|=(% colspan="3" %)AT+RPL 847 +|**Command Example**|**Function**|**Response** 848 +|AT+RPL=?|Get packet receiving response level|1((( 1091 1091 OK 1092 1092 ))) 1093 -| (% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK851 +|AT+RPL=0|Set packet receiving response level|OK 1094 1094 1095 -{{info}} 1096 -**Downlink Command: 0x21** 1097 -{{/info}} 853 +Downlink Command: 0x21 1098 1098 1099 1099 Format: Command Code (0x21) followed by 1 bytes level value. 1100 1100 1101 1101 If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21. 1102 1102 1103 -* **Example 1**: Downlink Payload:**2101**~/~/ set packet receiving response level to 11104 -* **Example 2**: Downlink Payload:**2102**~/~/ set packet receiving response level to 2859 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1 860 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2 1105 1105 1106 1106 = 8. AT Commands Combination = 1107 1107 1108 1108 == 8.1 Set a fix RX2DR for downlink window == 1109 1109 1110 -* **AT+ADR=0**~-~-> Disable ADR first1111 -* **AT+RX2DR=xxxx**~-~-> Set xxxx to your wanted DataRate866 +* AT+ADR=0 ~-~-> Disable ADR first 867 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate 1112 1112 1113 1113 == 8.2 Use Downlink Command to set a fix uplink DR == 1114 1114 1115 -{{info}} 1116 -**Downlink Command: 0x22000500** 1117 -{{/info}} 871 +Downlink Command: 0x22000500 1118 1118 1119 1119 Same as: 1120 1120 1121 -* AT+ADR=0 ||anchor="H7.1AdaptiveDataRate"]]1122 -* AT+DR=5 ||anchor="H7.4DataRate"]]1123 -* AT+TXP=0 ||anchor="H7.14TransmitPower"]]875 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]] 876 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]] 877 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
- image-20220511120050-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -136.3 KB - Content
- image-20220526162535-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -149.4 KB - Content