Last modified by kai on 2024/09/06 10:00
<
From version < 38.83 >
edited by Xiaoling
on 2022/05/31 09:20
To version < 50.6 >
edited by Xiaoling
on 2022/07/13 12:01
>
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,4 +1,4 @@
1 - **Contents：**
1 + **Table of** **Contents：**
2 2  
3 3  {{toc/}}
4 4  
... ... @@ -6,6 +6,7 @@
6 6  
7 7  = 1. Introduction =
8 8  
9 +
9 9  Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands:
10 10  
11 11  * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device.
... ... @@ -18,6 +18,7 @@
18 18  
19 19  = 2. How to use AT Commands or Downlink command =
20 20  
22 +
21 21  * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]]
22 22  * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command:
23 23  ** Use HEX format to send a downlink: [[TTN v3>>Notes for TTN]]
... ... @@ -25,8 +25,10 @@
25 25  ** See use note for more serves [[Servers Note>>doc:Main.WebHome]](IoT LoRaWAN Server)
26 26  
27 27  
30 +
28 28  = 3. Support End Node and firmware version =
29 29  
33 +
30 30  (% border="1" style="background-color:#ffffcc; color:green; width:966px" %)
31 31  |=(% colspan="3" style="width: 963px;" %)(((
32 32  Dragino STM32 base hardware Firmware / LoRaWAN stack list
... ... @@ -102,14 +102,13 @@
102 102  
103 103  = 4. System Management Commands =
104 104  
109 +
105 105  == 4.1 Change Uplink Interval ==
106 106  
112 +
107 107  Feature: Change LoRaWAN End Node Transmit Interval.
108 108  
109 -(% class="box infomessage" %)
110 -(((
111 -**AT Command: AT+TDC**
112 -)))
115 +(% style="color:blue" %)**AT Command: AT+TDC**
113 113  
114 114  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
115 115  |=(% colspan="3" style="width: 724px;" %)AT+TDC
... ... @@ -123,11 +123,11 @@
123 123  Set transmit interval to 60000ms = 60 seconds
124 124  )))
125 125  
126 -{{info}}
127 -**Downlink Command: 0x01**
128 -{{/info}}
129 -
130 130  (((
130 +
131 +
132 +(% style="color:blue" %)**Downlink Command: 0x01**
133 +
131 131  Format: Command Code (0x01) followed by 3 bytes time value.
132 132  )))
133 133  
... ... @@ -142,12 +142,13 @@
142 142  
143 143  == 4.2 Reboot End Node ==
144 144  
148 +
145 145  Feature: Reboot End Node to perform a new OTAA or ABP Join.
146 146  
147 -{{info}}
148 -**AT Command: ATZ**
149 -{{/info}}
150 150  
152 +(% style="color:blue" %)**AT Command: ATZ**
153 +
154 +
151 151  (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
152 152  |=(% colspan="3" %)ATZ: Trig a reset of the MCU
153 153  |**Command Example**|**Function**|**Response**
... ... @@ -165,10 +165,10 @@
165 165  <followed by the Tx and Rx information>
166 166  )))
167 167  
168 -{{info}}
169 -**Downlink Command: 0x04**
170 -{{/info}}
171 171  
173 +(% style="color:blue" %)**Downlink Command: 0x04**
174 +
175 +
172 172  (((
173 173  Format: Command Code (0x04) followed by FF.
174 174  )))
... ... @@ -181,11 +181,10 @@
181 181  
182 182  == 4.3 Reset to factory Default ==
183 183  
188 +
184 184  Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command.
185 185  
186 -{{info}}
187 -**AT Command: AT+FDR**
188 -{{/info}}
191 +(% style="color:blue" %)**AT Command: AT+FDR**
189 189  
190 190  (% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %)
191 191  |=(% colspan="3" style="width: 828px;" %)Reset to factory default
... ... @@ -204,10 +204,10 @@
204 204  Please set the parameters or reset Device to apply change
205 205  )))
206 206  
207 -{{info}}
208 -**Downlink Command: 0x04**
209 -{{/info}}
210 210  
211 +(% style="color:blue" %)**Downlink Command: 0x04**
212 +
213 +
211 211  (((
212 212  Format: Command Code (0x04) followed by FE.
213 213  )))
... ... @@ -221,10 +221,10 @@
221 221  
222 222  Feature: Show firmware version. No downlink command yet.
223 223  
224 -{{info}}
225 -**AT Command: AT+VER**
226 -{{/info}}
227 227  
228 +(% style="color:blue" %)**AT Command: AT+VER**
229 +
230 +
228 228  (% border="1" style="background-color:#ffffcc; color:green; width:586px" %)
229 229  |=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band
230 230  |(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -234,10 +234,10 @@
234 234  OK
235 235  )))
236 236  
237 -{{info}}
238 -**Downlink Command: 0x26 (Valid in 006 stack)**
239 -{{/info}}
240 240  
241 +(% style="color:blue" %)**Downlink Command: 0x26 (Valid in 006 stack)**
242 +
243 +
241 241  (((
242 242  Downlink Format: 0x26
243 243  )))
... ... @@ -280,10 +280,10 @@
280 280  
281 281  Feature: Show All configure. No downlink command yet.
282 282  
283 -{{info}}
284 -**AT Command: AT+CFG**
285 -{{/info}}
286 286  
287 +(% style="color:blue" %)**AT Command: AT+CFG**
288 +
289 +
287 287  (% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %)
288 288  |=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations
289 289  |(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response**
... ... @@ -301,8 +301,6 @@
301 301  OK
302 302  )))
303 303  
304 -
305 -
306 306  = 5. Keys, IDs and EUIs management =
307 307  
308 308  == 5.1 Application EUI ==
... ... @@ -309,10 +309,10 @@
309 309  
310 310  Feature: Get or Set the Application EUI.
311 311  
312 -{{info}}
313 -**AT Command: AT+APPEUI**
314 -{{/info}}
315 315  
314 +(% style="color:blue" %)**AT Command: AT+APPEUI**
315 +
316 +
316 316  (% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %)
317 317  |=(% colspan="3" style="width: 683px;" %)AT+APPEUI
318 318  |(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response**
... ... @@ -321,16 +321,14 @@
321 321  )))
322 322  |(% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK
323 323  
324 -
325 -
326 326  == 5.2 Application Key ==
327 327  
328 328  Feature: Get or Set the Application Key.
329 329  
330 -{{info}}
331 -**AT Command: AT+APPKEY**
332 -{{/info}}
333 333  
330 +(% style="color:blue" %)**AT Command: AT+APPKEY**
331 +
332 +
334 334  (% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %)
335 335  |=(% colspan="3" style="width: 973px;" %)AT+APPKEY
336 336  |(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response**
... ... @@ -339,15 +339,14 @@
339 339  )))
340 340  |(% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK
341 341  
342 -
343 343  == 5.3 Application Session Key ==
344 344  
345 345  Feature: Get or Set the Application Session Key.
346 346  
347 -{{info}}
348 -**AT Command: AT+APPSKEY**
349 -{{/info}}
350 350  
346 +(% style="color:blue" %)**AT Command: AT+APPSKEY**
347 +
348 +
351 351  (% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %)
352 352  |=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY
353 353  |(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response**
... ... @@ -358,15 +358,14 @@
358 358  OK
359 359  )))
360 360  
361 -
362 362  == 5.4 Device Address ==
363 363  
364 364  Feature: Get or Set the Device Address.
365 365  
366 -{{info}}
367 -**AT Command: AT+DADDR**
368 -{{/info}}
369 369  
364 +(% style="color:blue" %)**AT Command: AT+DADDR**
365 +
366 +
370 370  (% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %)
371 371  |=(% colspan="3" style="width: 792px;" %)AT+DADDR
372 372  |(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response**
... ... @@ -377,15 +377,14 @@
377 377  )))
378 378  |(% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK
379 379  
380 -
381 381  == 5.5 Device EUI ==
382 382  
383 383  Feature: Get or Set the Device EUI.
384 384  
385 -{{info}}
386 -**AT Command: AT+DEUI**
387 -{{/info}}
388 388  
382 +(% style="color:blue" %)**AT Command: AT+DEUI**
383 +
384 +
389 389  (% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %)
390 390  |=(% colspan="3" style="width: 1032px;" %)AT+DEUI
391 391  |(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response**
... ... @@ -396,15 +396,14 @@
396 396  OK
397 397  )))
398 398  
399 -
400 400  == 5.6 Network ID ==
401 401  
402 402  Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection)
403 403  
404 -{{info}}
405 -**AT Command: AT+NWKID**
406 -{{/info}}
407 407  
400 +(% style="color:blue" %)**AT Command: AT+NWKID**
401 +
402 +
408 408  (% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %)
409 409  |=(% colspan="3" style="width: 445px;" %)AT+NWKID
410 410  |(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response**
... ... @@ -413,15 +413,14 @@
413 413  )))
414 414  |(% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK
415 415  
416 -
417 417  == 5.7 Network Session Key ==
418 418  
419 419  Feature: Get or Set the Network Session Key
420 420  
421 -{{info}}
422 -**AT Command: AT+NWKSKEY**
423 -{{/info}}
424 424  
416 +(% style="color:blue" %)**AT Command: AT+NWKSKEY**
417 +
418 +
425 425  (% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %)
426 426  |=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY
427 427  |(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response**
... ... @@ -430,17 +430,18 @@
430 430  )))
431 431  |(% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK
432 432  
433 -
434 434  = 6. Joining and sending date on LoRaWAN network =
435 435  
436 436  == 6.1 Confirm Mode ==
437 437  
431 +=== AT+CFM command before DR-LWS007 software stack ===
432 +
438 438  Feature: Get or Set the confirmation mode (0-1).
439 439  
440 -{{info}}
441 -**AT Command: AT+CFM**
442 -{{/info}}
443 443  
436 +(% style="color:blue" %)**AT Command: AT+CFM**
437 +
438 +
444 444  (% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
445 445  |=(% colspan="3" style="width: 707px;" %)AT+CFM
446 446  |(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response**
... ... @@ -450,7 +450,7 @@
450 450  |(% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK
451 451  |(% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR
452 452  
453 -Downlink Command: 0x05
448 +(% style="color:blue" %)**Downlink Command: 0x05**
454 454  
455 455  Format: Command Code (0x05) followed by 2 bytes mode value.
456 456  
... ... @@ -459,15 +459,62 @@
459 459  * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1
460 460  * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0
461 461  
457 +=== AT+CFM command since DR-LWS007 software stack ===
462 462  
459 +
460 +(% style="color:blue" %)**AT Command: AT+CFM**
461 +
462 +
463 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
464 +|=(% colspan="3" style="width: 707px;" %)AT+CFM
465 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
466 +|(% style="width:160px" %)(((
467 +AT+CFM=1,0,0
468 +
469 +value1
470 +)))|(% style="width:198px" %)confirmed uplink|(% style="width:349px" %)(((
471 +1
472 +
473 +OK
474 +)))
475 +|(% style="width:160px" %)(((
476 +AT+CFM=0,?,0
477 +
478 +value2
479 +)))|(% style="width:198px" %)set max retry , range: 0 ~~ 7|(% style="width:349px" %)(((
480 +0~~7
481 +
482 +OK
483 +)))
484 +|(% style="width:160px" %)(((
485 +AT+CFM=0,0,1
486 +
487 +value3
488 +)))|(% style="width:198px" %)uplink fcnt increase by 1 for each retry|(% style="width:349px" %)(((
489 +1
490 +
491 +OK
492 +)))
493 +
494 +
495 +(% style="color:blue" %)**Downlink Command: 0x05**
496 +
497 +
498 +Format: Command Code (0x05) followed by 2 bytes mode value.
499 +
500 +If the downlink payload=05010101, it means set end node to use confirm mode, while type code is 05.
501 +
502 +* Example 1: Downlink Payload: 05010101 ~/~/ Set AT+CFM=1,1,1
503 +* Example 2: Downlink Payload: 05000700 ~/~/ Set AT+CFM=0,7,0
504 +
463 463  == 6.2 Confirm Status ==
464 464  
465 465  Feature: Get confirmation status of the last AT+SEND (0-1).
466 466  
467 -{{info}}
468 -**AT Command: AT+CFS**
469 -{{/info}}
470 470  
510 +(% style="color:blue" %)**AT Command: AT+CFS**
511 +
512 +
471 471  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
472 472  |=(% colspan="3" style="width: 531px;" %)AT+CFS
473 473  |(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response**
... ... @@ -475,15 +475,14 @@
475 475  OK
476 476  )))
477 477  
478 -
479 479  == 6.3 Join LoRa® Network ==
480 480  
481 481  Feature: Join network.
482 482  
483 -{{info}}
484 -**AT Command: AT+JOIN**
485 -{{/info}}
486 486  
525 +(% style="color:blue" %)**AT Command: AT+JOIN**
526 +
527 +
487 487  (% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %)
488 488  |=(% colspan="3" style="width: 644px;" %)AT+JOIN
489 489  |(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response**
... ... @@ -497,10 +497,10 @@
497 497  
498 498  Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA).
499 499  
500 -{{info}}
501 -**AT Command: AT+NJM**
502 -{{/info}}
503 503  
542 +(% style="color:blue" %)**AT Command: AT+NJM**
543 +
544 +
504 504  (% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %)
505 505  |=(% colspan="3" style="width: 750px;" %)AT+NJM
506 506  |(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response**
... ... @@ -510,15 +510,15 @@
510 510  |(% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK
511 511  |(% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR
512 512  
513 -{{info}}
514 -**Downlink Command: 0x20**
515 -{{/info}}
516 516  
555 +(% style="color:blue" %)**Downlink Command: 0x20**
556 +
557 +
517 517  Format: Command Code (0x20) followed by 1 bytes mode value.
518 518  
519 519  If the downlink payload=2000, it means set the Network Join Mode, while type code is 20.
520 520  
521 -* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=O
562 +* **Example 1: **Downlink Payload: **2000** ~/~/ Set AT+NJM=0
522 522  * **Example 2:** Downlink Payload: **2001** ~/~/ Set AT+NJM=1
523 523  
524 524  == 6.5 LoRa® Network Join Status ==
... ... @@ -525,10 +525,10 @@
525 525  
526 526  Feature: LoRa® Network Join Status.
527 527  
528 -{{info}}
529 -**AT Command: AT+NJS**
530 -{{/info}}
531 531  
570 +(% style="color:blue" %)**AT Command: AT+NJS**
571 +
572 +
532 532  (% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %)
533 533  |=(% colspan="3" style="width: 495px;" %)AT+NJS
534 534  |(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response**
... ... @@ -540,10 +540,10 @@
540 540  
541 541  Feature: Print Last Received Data in Raw Format<port:data>.
542 542  
543 -{{info}}
544 -**AT Command: AT+RECV**
545 -{{/info}}
546 546  
585 +(% style="color:blue" %)**AT Command: AT+RECV**
586 +
587 +
547 547  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
548 548  |=(% colspan="3" style="width: 584px;" %)AT+RECV
549 549  |(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -555,10 +555,10 @@
555 555  
556 556  Feature: Print Last Received Data in Binary Format<port:data>.
557 557  
558 -{{info}}
559 -**AT Command: AT+RECVB**
560 -{{/info}}
561 561  
600 +(% style="color:blue" %)**AT Command: AT+RECVB**
601 +
602 +
562 562  (% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %)
563 563  |=(% colspan="3" style="width: 790px;" %)AT+RECVB
564 564  |(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response**
... ... @@ -570,10 +570,10 @@
570 570  
571 571  Feature: Send Text Data<port:data>.
572 572  
573 -{{info}}
574 -**AT Command: AT+SEND**
575 -{{/info}}
576 576  
615 +(% style="color:blue" %)**AT Command: AT+SEND**
616 +
617 +
577 577  (% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %)
578 578  |=(% colspan="3" style="width: 988px;" %)AT+SEND
579 579  |(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response**
... ... @@ -589,10 +589,10 @@
589 589  
590 590  Feature: Send hexadecimal data along with the application port.
591 591  
592 -{{info}}
593 -**AT Command: AT+SENDB**
594 -{{/info}}
595 595  
634 +(% style="color:blue" %)**AT Command: AT+SENDB**
635 +
636 +
596 596  (% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %)
597 597  |=(% colspan="3" style="width: 1117px;" %)AT+SENDB
598 598  |(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response**
... ... @@ -609,10 +609,10 @@
609 609  
610 610  Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on).
611 611  
612 -{{info}}
613 -**AT Command: AT+ADR**
614 -{{/info}}
615 615  
654 +(% style="color:blue" %)**AT Command: AT+ADR**
655 +
656 +
616 616  (% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %)
617 617  |=(% colspan="3" style="width: 680px;" %)AT+ADR
618 618  |(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response**
... ... @@ -624,11 +624,11 @@
624 624  AT_PARAM_ERROR
625 625  )))
626 626  
627 -{{info}}
628 -**Downlink Command: 0x22**
629 -{{/info}}
630 630  
669 +(% style="color:blue" %)**Downlink Command: 0x22**
631 631  
671 +
672 +
632 632  If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22.
633 633  
634 634  * **Example 1**: Downlink Payload: **2201** ~/~/ Set AT+ADR=1.
... ... @@ -638,10 +638,10 @@
638 638  
639 639  Feature: Get or Set the Device Class(Currently only support class A, class C).
640 640  
641 -{{info}}
642 -**AT Command:AT+CLASS**
643 -{{/info}}
644 644  
683 +(% style="color:blue" %)**AT Command:AT+CLASS**
684 +
685 +
645 645  (% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %)
646 646  |=(% colspan="3" style="width: 504px;" %)AT+CLASS
647 647  |(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response**
... ... @@ -656,10 +656,10 @@
656 656  
657 657  Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing.
658 658  
659 -{{info}}
660 -**AT Command:AT+DCS**
661 -{{/info}}
662 662  
701 +(% style="color:blue" %)**AT Command:AT+DCS**
702 +
703 +
663 663  (% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %)
664 664  |=(% colspan="3" style="width: 512px;" %)AT+DCS
665 665  |(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response**
... ... @@ -674,10 +674,10 @@
674 674  
675 675  Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server
676 676  
677 -{{info}}
678 -**AT Command: AT+DR**
679 -{{/info}}
680 680  
719 +(% style="color:blue" %)**AT Command: AT+DR**
720 +
721 +
681 681  (% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %)
682 682  |=(% colspan="3" style="width: 463px;" %)AT+DR
683 683  |(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -688,11 +688,11 @@
688 688  
689 689  )))
690 690  
691 -{{info}}
692 -**Downlink Command: 0x2200aaFF**
693 -{{/info}}
694 694  
733 +(% style="color:blue" %)**Downlink Command: 0x2200aaFF**
695 695  
735 +
736 +
696 696  If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF.
697 697  
698 698  * **Example 1**: Downlink Payload: **220001FF** ~/~/ Set AT+DR=1.
... ... @@ -702,10 +702,10 @@
702 702  
703 703  Feature: Get or Set the Frame Counter Downlink.
704 704  
705 -{{info}}
706 -**AT Command:AT+FCD**
707 -{{/info}}
708 708  
747 +(% style="color:blue" %)**AT Command:AT+FCD**
748 +
749 +
709 709  (% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %)
710 710  |=(% colspan="3" style="width: 690px;" %)AT+FCD
711 711  |(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response**
... ... @@ -722,10 +722,10 @@
722 722  
723 723  Feature: Get or Set the Frame Counter Uplink.
724 724  
725 -{{info}}
726 -**AT Command:AT+FCU**
727 -{{/info}}
728 728  
767 +(% style="color:blue" %)**AT Command:AT+FCU**
768 +
769 +
729 729  (% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %)
730 730  |=(% colspan="3" style="width: 531px;" %)AT+FCU
731 731  |(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -740,10 +740,10 @@
740 740  
741 741  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms.
742 742  
743 -{{info}}
744 -**AT Command:AT+JN1DL**
745 -{{/info}}
746 746  
785 +(% style="color:blue" %)**AT Command:AT+JN1DL**
786 +
787 +
747 747  (% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %)
748 748  |=(% colspan="3" style="width: 534px;" %)AT+JN1DL
749 749  |(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response**
... ... @@ -758,10 +758,10 @@
758 758  
759 759  Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms.
760 760  
761 -{{info}}
762 -**AT Command:AT+JN2DL**
763 -{{/info}}
764 764  
803 +(% style="color:blue" %)**AT Command:AT+JN2DL**
804 +
805 +
765 765  (% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %)
766 766  |=(% colspan="3" style="width: 535px;" %)AT+JN2DL
767 767  |(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response**
... ... @@ -774,12 +774,14 @@
774 774  
775 775  == 7.9 Public Network Mode ==
776 776  
777 -Feature: Get or Set the public network mode. (0: off, 1: on)
818 +Feature: Get or Set the public network mode. (0: off, 1: on). A Public LoRaWAN network use 0x34 as syncword. Default Settings; PNM=1
778 778  
779 -{{info}}
780 -**AT Command:AT+PNM**
781 -{{/info}}
820 +Notice: If user build their own LoRaWAN server but still use syncword=0x34, this is still considered a public LoRaWAN network
782 782  
822 +
823 +(% style="color:blue" %)**AT Command:AT+PNM**
824 +
825 +
783 783  (% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %)
784 784  |=(% colspan="3" style="width: 664px;" %)AT+PNM
785 785  |(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response**
... ... @@ -786,20 +786,25 @@
786 786  |(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1(((
787 787  OK
788 788  )))
789 -|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((
832 +|(% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)(((
833 +Set the public network mode.
834 +
835 +Set syncword=0x34
836 +)))|(% style="width:272px" %)(System will write new value to PNM)(((
790 790  OK
791 791  
792 792  
793 793  )))
841 +|(% style="width:166px" %)AT+PNM=0|(% style="width:225px" %)Set to use private network autoset syncword=0x12|(% style="width:272px" %)
794 794  
795 795  == 7.10 Receive Delay1 ==
796 796  
797 797  Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms
798 798  
799 -{{info}}
800 -**AT Command:AT+RX1DL**
801 -{{/info}}
802 802  
848 +(% style="color:blue" %)**AT Command:AT+RX1DL**
849 +
850 +
803 803  (% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %)
804 804  |=(% colspan="3" style="width: 405px;" %)AT+RX1DL
805 805  |(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response**
... ... @@ -814,10 +814,10 @@
814 814  
815 815  Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms
816 816  
817 -{{info}}
818 -**AT Command:AT+RX2DL**
819 -{{/info}}
820 820  
866 +(% style="color:blue" %)**AT Command:AT+RX2DL**
867 +
868 +
821 821  (% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %)
822 822  |=(% colspan="3" style="width: 478px;" %)AT+RX2DL
823 823  |(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response**
... ... @@ -832,10 +832,10 @@
832 832  
833 833  Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X)
834 834  
835 -{{info}}
836 -**AT Command:AT+RX2DR**
837 -{{/info}}
838 838  
884 +(% style="color:blue" %)**AT Command:AT+RX2DR**
885 +
886 +
839 839  (% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %)
840 840  |=(% colspan="3" style="width: 522px;" %)AT+RX2DR
841 841  |(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response**
... ... @@ -850,10 +850,10 @@
850 850  
851 851  Feature: Get or Set the Rx2 window frequency
852 852  
853 -{{info}}
854 -**AT Command:AT+RX2FQ**
855 -{{/info}}
856 856  
902 +(% style="color:blue" %)**AT Command:AT+RX2FQ**
903 +
904 +
857 857  (% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %)
858 858  |=(% colspan="3" style="width: 584px;" %)AT+RX2FQ
859 859  |(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response**
... ... @@ -868,10 +868,10 @@
868 868  
869 869  Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. )
870 870  
871 -{{info}}
872 -**AT Command:AT+TXP**
873 -{{/info}}
874 874  
920 +(% style="color:blue" %)**AT Command:AT+TXP**
921 +
922 +
875 875  (% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %)
876 876  |=(% colspan="3" style="width: 462px;" %)AT+TXP
877 877  |(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response**
... ... @@ -893,10 +893,10 @@
893 893  
894 894  Feature: Get or Set the Rx2 window frequency
895 895  
896 -{{info}}
897 -**AT Command:AT+RSSI**
898 -{{/info}}
899 899  
945 +(% style="color:blue" %)**AT Command:AT+RSSI**
946 +
947 +
900 900  (% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %)
901 901  |=(% colspan="3" style="width: 554px;" %)AT+RSSI
902 902  |(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response**
... ... @@ -908,10 +908,10 @@
908 908  
909 909  Feature: Get the SNR of the last received packet
910 910  
911 -{{info}}
912 -**AT Command:AT+SNR**
913 -{{/info}}
914 914  
960 +(% style="color:blue" %)**AT Command:AT+SNR**
961 +
962 +
915 915  (% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %)
916 916  |=(% colspan="3" style="width: 568px;" %)AT+SNR
917 917  |(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response**
... ... @@ -923,10 +923,10 @@
923 923  
924 924  Feature: Get or set the application port.
925 925  
926 -{{info}}
927 -**AT Command: AT+PORT**
928 -{{/info}}
929 929  
975 +(% style="color:blue" %)**AT Command: AT+PORT**
976 +
977 +
930 930  (% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %)
931 931  |=(% colspan="3" style="width: 497px;" %)AT+PORT
932 932  |(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response**
... ... @@ -1103,6 +1103,129 @@
1103 1103  * **Example 1**: Downlink Payload: **2101** ~/~/ set packet receiving response level to 1
1104 1104  * **Example 2**: Downlink Payload: **2102** ~/~/ set packet receiving response level to 2
1105 1105  
1154 +== 7.24 Controls NBTrans in unconfirmed uplink mode（LWS007 NBTrans:Set retransmission packets) ==
1155 +
1156 +{{info}}
1157 +**AT Command: AT+SETMAXNBTRANS **
1158 +{{/info}}
1159 +
1160 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1161 +|=(% colspan="3" style="width: 533px;" %)AT+**SETMAXNBTRANS**
1162 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1163 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=1，0**|(% style="width:263px" %)Value1: set the maximum NBTrans.|(% style="width:109px" %)1(((
1164 +OK
1165 +)))
1166 +|(% style="width:160px" %)**AT+SETMAXNBTRANS=？，1**|(% style="width:263px" %)value2: 0: uplink fcnt doesn't change for each NBTrans; 1: uplink fcnt increase by 1 for each NBTrans.|(% style="width:109px" %)(((
1167 +1
1168 +
1169 +OK
1170 +)))
1171 +
1172 +{{info}}
1173 +**Downlink Command: 0x33**
1174 +{{/info}}
1175 +
1176 +Format: Command Code (0x33) followed by 2 bytes mode value.
1177 +
1178 +If the downlink payload=330100, it means set end node to use confirm mode, while type code is 33.
1179 +
1180 +* Example 1: Downlink Payload: 330100 ~/~/ Set AT+SETMAXNBTRANS=1,0
1181 +* Example 2: Downlink Payload: 330201 ~/~/ Set AT+SETMAXNBTRANS=2,1
1182 +
1183 +== 7.25 Device offline rejoining （LWS007) ==
1184 +
1185 +{{info}}
1186 +**AT Command: AT+DDETECT**
1187 +{{/info}}
1188 +
1189 +(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %)
1190 +|=(% colspan="3" style="width: 707px;" %)AT+**DDETECT**
1191 +|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response**
1192 +|(% style="width:160px" %)(((
1193 +AT+DDETECT=1,1440,2880
1194 +
1195 +value1
1196 +)))|(% style="width:198px" %)Enable online detect|(% style="width:349px" %)(((
1197 +1
1198 +
1199 +OK
1200 +)))
1201 +|(% style="width:160px" %)(((
1202 +AT+DDETECT=1,?,2880
1203 +
1204 +value2
1205 +)))|(% style="width:198px" %)Online detection packet sending time|(% style="width:349px" %)(((
1206 +
1207 +
1208 +OK
1209 +)))
1210 +|(% style="width:160px" %)(((
1211 +AT+DDETECT=1,1440,？
1212 +
1213 +value3
1214 +)))|(% style="width:198px" %)Process rejoin|(% style="width:349px" %)(((
1215 +
1216 +
1217 +OK
1218 +)))
1219 +
1220 +{{info}}
1221 +**Downlink Command: 0x33**
1222 +{{/info}}
1223 +
1224 +Format: Command Code (0x32) followed by 2 bytes mode value.
1225 +
1226 +If the downlink payload=320105A00B40, it means set end node to use confirm mode, while type code is 33.
1227 +
1228 +* Example 1: Downlink Payload: 320105A00B40 ~/~/ Set AT+DDETECT=1,1440,2880
1229 +
1230 +== 7.26 Request the server to send an ACK ==
1231 +
1232 +{{info}}
1233 +**AT Command: AT+PNACKMD**
1234 +{{/info}}
1235 +
1236 +(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %)
1237 +|=(% colspan="3" style="width: 533px;" %)**AT+PNACKMD**
1238 +|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response**
1239 +|(% style="width:160px" %)**AT+PNACKMD=1**|(% style="width:263px" %)If the node uploads the ACK as confirm, it will request the server to send an ACK. If the server ack is not received, the node will upload the packets that have not received the ACK the next time it receives the ACK|(% style="width:109px" %)1(((
1240 +OK
1241 +)))
1242 +|(% style="width:160px" %)**AT+PNACKMD=0**|(% style="width:263px" %)off request the server to send an ACK|(% style="width:109px" %)(((
1243 +0
1244 +
1245 +OK
1246 +)))
1247 +
1248 +== 7.27 Adjust network rejoining interval ==
1249 +
1250 +{{info}}
1251 +**AT Command: AT+RJTDC**
1252 +{{/info}}
1253 +
1254 +(% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %)
1255 +|=(% colspan="3" style="width: 724px;" %)AT+RJTDC
1256 +|(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response**
1257 +|(% style="width:165px" %)AT+RJTDC=?|(% style="width:227px" %)Show the ReJoin data transmission interval in min|(% style="width:329px" %)30000(((
1258 +OK
1259 +
1260 +the interval is 30000ms = 30s
1261 +)))
1262 +|(% style="width:165px" %)AT+RJTDC=60000|(% style="width:227px" %)Set the ReJoin data transmission interval in min|(% style="width:329px" %)OK(((
1263 +Set the ReJoin data transmission interval to 60000ms = 60 seconds
1264 +)))
1265 +
1266 +{{info}}
1267 +**Downlink Command: 0x26**
1268 +{{/info}}
1269 +
1270 +Format: Command Code (0x26) followed by 2 bytes mode value.
1271 +
1272 +If the downlink payload=26000A, it means set end node to use confirm mode, while type code is 26.
1273 +
1274 +* Example 1: Downlink Payload: 26000A ~/~/ Set AT+RJTDC=10
1275 +* Example 2: Downlink Payload: 260002 ~/~/ Set AT+RJTDC=2
1276 +
1106 1106  = 8. AT Commands Combination =
1107 1107  
1108 1108  == 8.1 Set a fix RX2DR for downlink window ==
... ... @@ -1121,3 +1121,4 @@
1121 1121  * AT+ADR=0  [[Reference>>||anchor="H7.1AdaptiveDataRate"]]
1122 1122  * AT+DR=5  [[Reference>>||anchor="H7.4DataRate"]]
1123 1123  * AT+TXP=0  [[Reference>>||anchor="H7.14TransmitPower"]]
1295 +~)~)~)

Applications

Navigation

Copyright ©2010-2024 Dragino Technology Co., LTD. All rights reserved
Dragino Wiki v2.0