Changes for page End Device AT Commands and Downlink Command
Last modified by kai on 2024/09/06 10:00
Summary
-
Page properties (1 modified, 0 added, 0 removed)
-
Attachments (0 modified, 0 added, 2 removed)
Details
- Page properties
-
- Content
-
... ... @@ -1,9 +1,8 @@ 1 - **Contents：**1 +Contens 2 2 3 3 {{toc/}} 4 4 5 5 6 - 7 7 = 1. Introduction = 8 8 9 9 Dragino LoRaWAN End Node support two types of AT Commands and Downlink Commands: ... ... @@ -11,95 +11,62 @@ 11 11 * **Common Commands:** They should be available for each sensor, such as: change uplink interval, reset device. 12 12 * **Sensor Related Commands:** Only for special sensor, such as control relay, poll RS485 device. 13 13 14 -((( 15 15 **This page shows the common commands since Dragino LoRaWAN stack DR-LWS-005. Make sure the end node support stack higher than DR-LWS-005 before checking this page.** 16 16 17 -))) 18 18 19 19 = 2. How to use AT Commands or Downlink command = 20 20 21 21 * For AT Command , See Devices User Manual for Device. The user manual can be found in each product page of [[Dragino Official Website>>url:http://www.dragino.com/]] 22 22 * For LoRaWAN Downlink: The gateway transfer downlink command in HEX format. This page shows the HEX format downlink code for each command. but some servers use base64 as downlink code. Below are reference for how to use downlink command: 23 -** Use HEX format to send a downlink: [[TTN v3>>Notes 24 -** Use Base64 format to send a downlink: [[Chirpstack>>Notes 25 -** See use note for more serves [[Servers Note>>doc :Main.WebHome]](IoT LoRaWANServer)20 +** Use HEX format to send a downlink: [[TTN v3>>url:https://wiki.dragino.com/index.php/Notes_for_TTN#Send_Downlink_message]] 21 +** Use Base64 format to send a downlink: [[Chirpstack>>url:https://wiki.dragino.com/index.php/Notes_for_ChirpStack#Downlink]]. 22 +** See use note for more serves [[Servers Note>>url:https://wiki.dragino.com/index.php/Main_Page#Use_Note_for_Server]] 26 26 27 - 28 28 = 3. Support End Node and firmware version = 29 29 30 -(% border="1" style="background-color:#ffffcc; color:green; width:966px" %) 31 -|=(% colspan="3" style="width: 963px;" %)((( 32 -Dragino STM32 base hardware Firmware / LoRaWAN stack list 33 -))) 34 -|(% style="width:187px" %)((( 35 -**Model** 36 -)))|(% style="width:330px" %)((( 37 -**Description** 38 -)))|(% style="width:445px" %)((( 39 -**Firmware Version <~-~-> Stack Version** 40 -))) 41 -|(% style="width:187px" %)((( 42 -[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]], 43 -)))|(% style="width:330px" %)((( 44 -Open Source Generic LoRaWAN Sensor Node 45 -)))|(% style="width:445px" %)((( 46 -((( 47 -LSN50 v1.6.0 <~-~-> DR-LWS-003; 48 -))) 49 49 50 -((( 51 -((( 27 +|=(% colspan="3" %)PWR LED4G control (Second +3.3v)USB POWER(+5v) Control 28 +|=PWR LED|=4G control (Second +3.3v)|=USB POWER(+5v) Control 29 +|((( 30 + 31 + 32 ++3.3v 33 +)))|((( 34 + 35 + 36 +GPIO15 37 +)))| 38 +|+3.3v|GPIO15 |GPIO1 39 +|+3.3v|GPIO15 |GPIO1 40 +|+3.3v| | 41 +|+3.3v|PA17| 42 + 43 +(% style="background-color:#ffffcc; color:green; width:1039.22px" %) 44 +|(% colspan="3" style="width:1036px" %)** Dragino STM32 base hardware Firmware / LoRaWAN stack list** 45 +|(% style="width:216px" %)**Model**|(% style="width:346px" %)**Description**|(% style="width:472px" %)**Firmware Version <~-~-> Stack Version** 46 +|(% style="width:216px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:346px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:472px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 52 52 LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 53 53 ))) 54 -))) 55 -))) 56 -|(% style="width:187px" %)((( 57 -[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]], 58 -)))|(% style="width:330px" %)((( 59 -LoRaWAN GPS Tracker 60 -)))|(% style="width:445px" %)((( 61 -((( 62 -LGT92 v1.6.3 <~-~-> DR-LWS-003; 63 -))) 49 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 50 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 51 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 52 +|(% style="width:216px" %) |(% style="width:346px" %) |(% style="width:472px" %) 64 64 65 -((( 66 -((( 54 +(% border="1" style="background-color:#ffffcc; color:green; width:942.222px" %) 55 +|=(% colspan="3" style="width: 939px;" %) Dragino STM32 base hardware Firmware / LoRaWAN stack list 56 +|(% style="width:187px" %)**Model**|(% style="width:306px" %)**Description**|(% style="width:443px" %)**Firmware Version <~-~-> Stack Version** 57 +|(% style="width:187px" %)[[LSN50-v1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/128-lsn50.html]], [[LSN50-V2>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/155-lsn50-v2.html]],|(% style="width:306px" %)Open Source Generic LoRaWAN Sensor Node|(% style="width:443px" %)LSN50 v1.6.0 <~-~-> DR-LWS-003;((( 58 +LSN50 v1.7.0 <~-~-> DR-LWS-005; ~-~-> Support since this version 59 +))) 60 +|(% style="width:187px" %)[[LGT92>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/142-lgt-92.html]],|(% style="width:306px" %)LoRaWAN GPS Tracker|(% style="width:443px" %)LGT92 v1.6.3 <~-~-> DR-LWS-003;((( 67 67 LGT92 v1.6.4 <~-~-> DR-LWS-005;~-~-> Support since this version 68 68 ))) 69 -))) 70 -))) 71 -|(% style="width:187px" %)((( 72 -[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]], 73 -)))|(% style="width:330px" %)((( 74 -LoRaWAN BLE Indoor Tracker 75 -)))|(% style="width:445px" %)((( 76 -LBT1 v1.0 <~-~-> DR-LWS-005; 77 -))) 78 -|(% style="width:187px" %)((( 79 -[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]], 80 -)))|(% style="width:330px" %)((( 81 -LoRaWAN RS485 Modbus Converter 82 -)))|(% style="width:445px" %)((( 83 -RS485-LN v1.3 <~-~-> DR-LWS-005; 84 -))) 85 -|(% style="width:187px" %)((( 86 -[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]], 87 -)))|(% style="width:330px" %)((( 88 -LoRaWAN Temperature & Humidity Sensor 89 -)))|(% style="width:445px" %)((( 90 -((( 91 -LHT65 v1.7 <~-~-> DR-LWS-003; 92 -))) 93 - 94 -((( 95 -((( 63 +|(% style="width:187px" %)[[LBT1>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/165-lbt1.html]],|(% style="width:306px" %)LoRaWAN BLE Indoor Tracker|(% style="width:443px" %)LBT1 v1.0 <~-~-> DR-LWS-005; 64 +|(% style="width:187px" %)[[RS485-LN>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/154-rs485-ln.html]],|(% style="width:306px" %)LoRaWAN RS485 Modbus Converter|(% style="width:443px" %)RS485-LN v1.3 <~-~-> DR-LWS-005; 65 +|(% style="width:187px" %)[[LHT65>>url:http://www.dragino.com/products/lora-lorawan-end-node/item/151-lht65.html]],|(% style="width:306px" %)LoRaWAN Temperature & Humidity Sensor|(% style="width:443px" %)LHT65 v1.7 <~-~-> DR-LWS-003;((( 96 96 LHT65 v1.8.0 <~-~-> DR-LWS-005;~-~-> Support since this version 97 97 ))) 98 -))) 99 -))) 100 100 101 - 102 - 103 103 = 4. System Management Commands = 104 104 105 105 == 4.1 Change Uplink Interval == ... ... @@ -108,11 +108,11 @@ 108 108 109 109 (% class="box infomessage" %) 110 110 ((( 111 - **AT Command: AT+TDC**77 +AT Command: AT+TDC 112 112 ))) 113 113 114 114 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 115 -|=(% colspan="3" style="width: 724px;" %)AT+TDC 81 +|=(% colspan="3" style="width: 724px;" %) AT+TDC 116 116 |(% style="width:165px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:329px" %)**Response** 117 117 |(% style="width:165px" %)AT+TDC=?|(% style="width:227px" %)Show current transmit Interval|(% style="width:329px" %)30000((( 118 118 OK ... ... @@ -123,34 +123,27 @@ 123 123 Set transmit interval to 60000ms = 60 seconds 124 124 ))) 125 125 126 -{{info}} 127 127 **Downlink Command: 0x01** 128 -{{/info}} 129 129 130 -((( 131 131 Format: Command Code (0x01) followed by 3 bytes time value. 132 -))) 133 133 134 -((( 135 135 If the downlink payload=0100003C, it means set the END Node’s Transmit Interval to 0x00003C=60(S), while type code is 01. 136 -))) 137 137 138 138 * **Example 1**: Downlink Payload:** 0100001E** ~/~/ Set Transmit Interval (TDC) = 30 seconds 139 139 * **Example 2**: Downlink Payload:** 0100003C** ~/~/ Set Transmit Interval (TDC) = 60 seconds 140 140 141 - 142 - 143 143 == 4.2 Reboot End Node == 144 144 145 145 Feature: Reboot End Node to perform a new OTAA or ABP Join. 146 146 147 147 {{info}} 148 - **AT Command: ATZ**106 +AT Command: ATZ 149 149 {{/info}} 150 150 151 151 (% border="1" style="background-color:#ffffcc; color:green; width:727.222px" %) 152 -|=(% colspan="3" %)ATZ: Trig a reset of the MCU 110 +|=(% colspan="3" %) ATZ: Trig a reset of the MCU 153 153 |**Command Example**|**Function**|**Response** 112 +~)~)~) 154 154 |ATZ|Reset MCU|((( 155 155 Device reset and show booting info 156 156 ... ... @@ -165,56 +165,35 @@ 165 165 <followed by the Tx and Rx information> 166 166 ))) 167 167 168 -{{info}} 169 -**Downlink Command: 0x04** 170 -{{/info}} 127 +Downlink Command: 0x04 171 171 172 -((( 173 173 Format: Command Code (0x04) followed by FF. 174 -))) 175 175 176 -((( 177 -If the downlink payload=**04FF**, the end node will reboot. 131 +If the downlink payload=04FF, the end node will reboot. 178 178 179 - 180 -))) 181 - 182 182 == 4.3 Reset to factory Default == 183 183 184 184 Feature: Reset the parameters to Factory Default, factory default value depends on the firmware settings, the OTAA and ABP keys will reserve after this command. 185 185 186 -{{info}} 187 -**AT Command: AT+FDR** 188 -{{/info}} 137 +AT Command: AT+FDR 189 189 190 -(% border="1" style="background-color:#ffffcc; color:green; width:831.222px" %) 191 -|=(% colspan="3" style="width: 828px;" %)Reset to factory default 192 -|(% style="width:181px" %)**Command Example**|(% style="width:181px" %)**Function**|(% style="width:465px" %)**Response** 193 -|(% style="width:181px" %)AT+FDR|(% style="width:181px" %)Reset to factory default|(% style="width:465px" %)((( 194 -Device reset to factory default parameters and show booting info 139 +|=(% colspan="3" %)Reset to factory default 140 +|**Command Example**|**Function**|**Response** 141 +|AT+FDR|Reset to factory default|Device reset to factory default parameters and show booting info 195 195 196 -LSN50 Device/LoRa ST Module 197 - 143 +{{{LSN50 Device/LoRa ST Module 198 198 Image Version: XX 199 - 200 200 Frequency Band: XX 201 - 202 202 DevEui= XX XX XX XX XX XX XX XX 203 - 204 204 Please set the parameters or reset Device to apply change 205 - )))148 +}}} 206 206 207 -{{info}} 208 -**Downlink Command: 0x04** 209 -{{/info}} 210 210 211 -((( 151 +Downlink Command: 0x04 152 + 212 212 Format: Command Code (0x04) followed by FE. 213 -))) 214 214 215 -((( 216 -If the downlink payload=**04FE**, Reset Parameters to Factory Default, Keys Reserve. 217 -))) 155 +If the downlink payload=04FE, Reset Parameters to Factory Default, Keys Reserve. 218 218 219 219 220 220 == 4.4 Show Firmware Version == ... ... @@ -221,42 +221,30 @@ 221 221 222 222 Feature: Show firmware version. No downlink command yet. 223 223 224 -{{info}} 225 -**AT Command: AT+VER** 226 -{{/info}} 162 +AT Command: AT+VER 227 227 228 -(% border="1" style="background-color:#ffffcc; color:green; width:586px" %) 229 -|=(% colspan="3" style="width: 583px;" %)AT+VER: Image Version and Frequency Band 230 -|(% style="width:170px" %)**Command Example**|(% style="width:300px" %)**Function**|(% style="width:113px" %)**Response** 231 -|(% style="width:170px" %)AT+VER=?|(% style="width:300px" %)Show Image version and Frequency Band|(% style="width:113px" %)((( 232 -1.3 EU868 164 +|=(% colspan="3" %)AT+VER: Image Version and Frequency Band 165 +|**Command Example**|**Function**|**Response** 166 +|AT+VER=?|Show Image version and Frequency Band| 233 233 168 +{{{1.3 EU868 234 234 OK 235 - )))170 +}}} 236 236 237 -{{info}} 238 -**Downlink Command: 0x26 (Valid in 006 stack)** 239 -{{/info}} 240 240 241 -((( 173 +Downlink Command: 0x26 (Valid in 006 stack) 174 + 242 242 Downlink Format: 0x26 243 -))) 244 244 245 -((( 246 246 Device will reply with firmware version info, device info. frequency band info. detail please check device user manual. Total 5 bytes Example: If device is of firmware version 1.1.0 Upload: xx ~-~- yy ~-~- zz ~-~- 110 total 5 bytes 247 -))) 248 248 249 -((( 250 -**xx: Software Type:** 251 -))) 179 +xx: Software Type: 252 252 253 253 * 0x00 01: LGT92 Version 254 254 * 0x00 02: LBT1 255 255 * 0x00 03: LSE01/LDDS75/LDDS20/LSPH01/LLMS01/LSNPK01 256 256 257 -((( 258 -**yy: Frequency Band:** 259 -))) 185 +yy: Frequency Band: 260 260 261 261 * 0x01: EU868 262 262 * 0x02: US915 ... ... @@ -269,9 +269,7 @@ 269 269 * 0x09: AS923-2 270 270 * 0xa0: AS923-3 271 271 272 -((( 273 -**zz: Subband** 274 -))) 198 +zz: Subband 275 275 276 276 firmware version: v1.1.0 ~-~-> 110 277 277 ... ... @@ -280,27 +280,21 @@ 280 280 281 281 Feature: Show All configure. No downlink command yet. 282 282 283 -{{info}} 284 -**AT Command: AT+CFG** 285 -{{/info}} 207 +AT Command: AT+CFG 286 286 287 -(% border="1" style="background-color:#ffffcc; color:green; width:599.222px" %) 288 -|=(% colspan="3" style="width: 596px;" %)AT+CFG: Print all configurations 289 -|(% style="width:160px" %)**Command Example**|(% style="width:154px" %)**Function**|(% style="width:280px" %)**Response** 290 -|(% style="width:160px" %)AT+CFG|(% style="width:154px" %)Show all configures|(% style="width:280px" %)((( 291 -AT+DEUI = XX XX XX XX XX XX XX XX 209 +|=(% colspan="3" %)AT+CFG: Print all configurations 210 +|**Command Example**|**Function**|**Response** 211 +|AT+CFG|Show all configures| 292 292 213 +{{{AT+DEUI = XX XX XX XX XX XX XX XX 293 293 AT+DADDR=XXXXXXXX 294 - 295 295 ………. 296 - 297 297 AT+RX2WTO=X 298 - 299 299 AT+CHS=868100000 300 - 301 301 OK 302 - )))219 +}}} 303 303 221 + 304 304 = 5. Keys, IDs and EUIs management = 305 305 306 306 == 5.1 Application EUI == ... ... @@ -307,126 +307,99 @@ 307 307 308 308 Feature: Get or Set the Application EUI. 309 309 310 -{{info}} 311 -**AT Command: AT+APPEUI** 312 -{{/info}} 228 +AT Command: AT+APPEUI 313 313 314 -(% border="1" style="background-color:#ffffcc; color:green; width:686.222px" %) 315 -|=(% colspan="3" style="width: 683px;" %)AT+APPEUI 316 -|(% style="width:305px" %)**Command Example**|(% style="width:186px" %)**Function**|(% style="width:191px" %)**Response** 317 -|(% style="width:305px" %)AT+APPEUI=?|(% style="width:186px" %)Get the Application EUI|(% style="width:191px" %)00 b3 d5 00 00 00 00 00((( 230 +|=(% colspan="3" %)AT+APPEUI 231 +|**Command Example**|**Function**|**Response** 232 +|AT+APPEUI=?|Get the Application EUI|00 b3 d5 00 00 00 00 00((( 318 318 OK 319 319 ))) 320 -| (% style="width:305px" %)AT+APPEUI=00 b3 d5 7e f0 00 4d 34|(% style="width:186px" %)Set the Application EUI|(% style="width:191px" %)OK235 +|AT+APPEUI=00 b3 d5 7e f0 00 4d 34|Set the Application EUI|OK 321 321 322 322 == 5.2 Application Key == 323 323 324 324 Feature: Get or Set the Application Key. 325 325 326 -{{info}} 327 -**AT Command: AT+APPKEY** 328 -{{/info}} 241 +AT Command: AT+APPKEY 329 329 330 -(% border="1" style="background-color:#ffffcc; color:green; width:976.222px" %) 331 -|=(% colspan="3" style="width: 973px;" %)AT+APPKEY 332 -|(% style="width:441px" %)**Command Example**|(% style="width:180px" %)**Function**|(% style="width:350px" %)**Response** 333 -|(% style="width:441px" %)AT+APPKEY=?|(% style="width:180px" %)Get the Application Key|(% style="width:350px" %)00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 243 +|=(% colspan="3" %)AT+APPKEY 244 +|**Command Example**|**Function**|**Response** 245 +|AT+APPKEY=?|Get the Application Key|00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35((( 334 334 OK 335 335 ))) 336 -| (% style="width:441px" %)AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|(% style="width:180px" %)Set the Application Key|(% style="width:350px" %)OK248 +|AT+APPKEY=00 35 55 55 22 23 55 53 43 24 23 42 34 35 35 35|Set the Application Key.|OK 337 337 338 - 339 339 == 5.3 Application Session Key == 340 340 341 341 Feature: Get or Set the Application Session Key. 342 342 343 -{{info}} 344 -**AT Command: AT+APPSKEY** 345 -{{/info}} 254 +AT Command: AT+APPSKEY 346 346 347 -(% border="1" style="background-color:#ffffcc; color:green; width:1040.22px" %) 348 -|=(% colspan="3" style="width: 1037px;" %)AT+APPSKEY 349 -|(% style="width:451px" %)**Command Example**|(% style="width:231px" %)**Function**|(% style="width:354px" %)**Response** 350 -|(% style="width:451px" %)AT+APPSKEY=?|(% style="width:231px" %)Get the Application Session Key|(% style="width:354px" %)00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 256 +|=(% colspan="3" %)AT+APPSKEY 257 +|**Command Example**|**Function**|**Response** 258 +|AT+APPSKEY=?|Get the Application Session Key|00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2((( 351 351 OK 352 352 ))) 353 -| (% style="width:451px" %)AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|(% style="width:231px" %)Set the Application Session Key|(% style="width:354px" %)(While Error in format, return AT_PARAM_ERROR)(((261 +|AT+APPSKEY=00 7d dc 73 33 d3 eb 9e 14 38 d5 a4 3e 62 5b e2|Set the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 354 354 OK 355 355 ))) 356 356 357 - 358 358 == 5.4 Device Address == 359 359 360 360 Feature: Get or Set the Device Address. 361 361 362 -{{info}} 363 -**AT Command: AT+DADDR** 364 -{{/info}} 269 +AT Command: AT+DADDR 365 365 366 -(% border="1" style="background-color:#ffffcc; color:green; width:795.222px" %) 367 -|=(% colspan="3" style="width: 792px;" %)AT+DADDR 368 -|(% style="width:192px" %)**Command Example**|(% style="width:241px" %)**Function**|(% style="width:359px" %)**Response** 369 -|(% style="width:192px" %)AT+DADDR=?|(% style="width:241px" %)Get the Application Session Key.|(% style="width:359px" %)(While Error in format, return AT_PARAM_ERROR)((( 271 +|=(% colspan="3" %)AT+DADDR 272 +|**Command Example**|**Function**|**Response** 273 +|AT+DADDR=?|Get the Application Session Key.|(While Error in format, return AT_PARAM_ERROR)((( 370 370 A8 40 41 FF 371 371 372 372 OK 373 373 ))) 374 -| (% style="width:192px" %)AT+DADDR=A8 40 41 FF|(% style="width:241px" %)Set the Application Session Key.|(% style="width:359px" %)OK278 +|AT+DADDR=A8 40 41 FF|Set the Application Session Key.|OK 375 375 376 - 377 377 == 5.5 Device EUI == 378 378 379 379 Feature: Get or Set the Device EUI. 380 380 381 -{{info}} 382 -**AT Command: AT+DEUI** 383 -{{/info}} 284 +AT Command: AT+DEUI 384 384 385 -(% border="1" style="background-color:#ffffcc; color:green; width:1035.22px" %) 386 -|=(% colspan="3" style="width: 1032px;" %)AT+DEUI 387 -|(% style="width:250px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:634px" %)**Response** 388 -|(% style="width:250px" %)AT+DEUI=?|(% style="width:147px" %)Get the Device EUI.|(% style="width:634px" %)00 44 34 22 33 45 55 55((( 286 +|=(% colspan="3" %)AT+DEUI 287 +|**Command Example**|**Function**|**Response** 288 +|AT+DEUI=?|Get the Device EUI.|00 44 34 22 33 45 55 55((( 389 389 OK 390 390 ))) 391 -| (% style="width:250px" %)AT+DEUI=A8 40 41 FF FF 12 34 56|(% style="width:147px" %)Set the Device EUI.|(% style="width:634px" %)(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)(((291 +|AT+DEUI=A8 40 41 FF FF 12 34 56|Set the Device EUI.|(System will write new value to Device EUI,While Error in format, return AT_PARAM_ERROR)((( 392 392 OK 393 393 ))) 394 394 395 - 396 396 == 5.6 Network ID == 397 397 398 398 Feature: Get or Set the Network ID.(You can enter this command change only after successful network connection) 399 399 400 -{{info}} 401 -**AT Command: AT+NWKID** 402 -{{/info}} 299 +AT Command: AT+NWKID 403 403 404 -(% border="1" style="background-color:#ffffcc; color:green; width:448.222px" %) 405 -|=(% colspan="3" style="width: 445px;" %)AT+NWKID 406 -|(% style="width:191px" %)**Command Example**|(% style="width:153px" %)**Function**|(% style="width:101px" %)**Response** 407 -|(% style="width:191px" %)AT+NWKID=?|(% style="width:153px" %)Get the Network ID.|(% style="width:101px" %)a8 40 41 ff((( 301 +|=(% colspan="3" %)AT+NWKID 302 +|**Command Example**|**Function**|**Response** 303 +|AT+NWKID=?|Get the Network ID.|a8 40 41 ff((( 408 408 OK 409 409 ))) 410 -| (% style="width:191px" %)AT+NWKID=A8 40 41 FF|(% style="width:153px" %)Set the Network ID.|(% style="width:101px" %)OK306 +|AT+NWKID=A8 40 41 FF|Set the Network ID.|OK 411 411 412 - 413 413 == 5.7 Network Session Key == 414 414 415 415 Feature: Get or Set the Network Session Key 416 416 417 -{{info}} 418 -**AT Command: AT+NWKSKEY** 419 -{{/info}} 312 +AT Command: AT+NWKSKEY 420 420 421 -(% border="1" style="background-color:#ffffcc; color:green; width:1017.22px" %) 422 -|=(% colspan="3" style="width: 1014px;" %)AT+NWKSKEY 423 -|(% style="width:455px" %)**Command Example**|(% style="width:215px" %)**Function**|(% style="width:343px" %)**Response** 424 -|(% style="width:455px" %)AT+NWKSKEY=?|(% style="width:215px" %)Get the Network Session Key.|(% style="width:343px" %)00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 314 +|=(% colspan="3" %)AT+NWKSKEY 315 +|**Command Example**|**Function**|**Response** 316 +|AT+NWKSKEY=?|Get the Network Session Key.|00 4f 19 25 52 ce 97 09 d7 fa 84 71 db 51 02 92((( 425 425 OK 426 426 ))) 427 -| (% style="width:455px" %)AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|(% style="width:215px" %)Set the Network Session Key.|(% style="width:343px" %)OK319 +|AT+NWKSKEY=A8 40 41 FF FF 12 34 56 00 01 02 04 05 06 06 07|Set the Network Session Key.|OK 428 428 429 - 430 430 = 6. Joining and sending date on LoRaWAN network = 431 431 432 432 == 6.1 Confirm Mode == ... ... @@ -433,18 +433,15 @@ 433 433 434 434 Feature: Get or Set the confirmation mode (0-1). 435 435 436 -{{info}} 437 -**AT Command: AT+CFM** 438 -{{/info}} 327 +AT Command: AT+CFM 439 439 440 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 441 -|=(% colspan="3" style="width: 707px;" %)AT+CFM 442 -|(% style="width:155px" %)**Command Example**|(% style="width:205px" %)**Function**|(% style="width:346px" %)**Response** 443 -|(% style="width:155px" %)AT+CFM=?|(% style="width:205px" %)Get the confirmation mode|(% style="width:346px" %)0((( 329 +|=(% colspan="3" %)AT+CFM 330 +|**Command Example**|**Function**|**Response** 331 +|AT+CFM=?|Get the confirmation mode|0((( 444 444 OK 445 445 ))) 446 -| (% style="width:155px" %)AT+CFM=1|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)OK447 -| (% style="width:155px" %)AT+CFM=2|(% style="width:205px" %)Set the confirmation mode|(% style="width:346px" %)While Error in format, return AT_PARAM_ERROR334 +|AT+CFM=1|Set the confirmation mode|OK 335 +|AT+CFM=2|Set the confirmation mode|While Error in format, return AT_PARAM_ERROR 448 448 449 449 Downlink Command: 0x05 450 450 ... ... @@ -455,35 +455,27 @@ 455 455 * Example 1: Downlink Payload: 0501 ~/~/ Set AT+CFM=1 456 456 * Example 2: Downlink Payload: 0500 ~/~/ Set AT+CFM=0 457 457 458 - 459 459 == 6.2 Confirm Status == 460 460 461 461 Feature: Get confirmation status of the last AT+SEND (0-1). 462 462 463 -{{info}} 464 -**AT Command: AT+CFS** 465 -{{/info}} 350 +AT Command: AT+CFS 466 466 467 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 468 -|=(% colspan="3" style="width: 531px;" %)AT+CFS 469 -|(% style="width:156px" %)**Command Example**|(% style="width:193px" %)**Function**|(% style="width:178px" %)**Response** 470 -|(% style="width:156px" %)AT+CFS=?|(% style="width:193px" %)Get confirmation status|(% style="width:178px" %)0((( 352 +|=(% colspan="3" %)AT+CFS 353 +|**Command Example**|**Function**|**Response** 354 +|AT+CFS=?|Get confirmation status|0((( 471 471 OK 472 472 ))) 473 473 474 - 475 475 == 6.3 Join LoRa® Network == 476 476 477 477 Feature: Join network. 478 478 479 -{{info}} 480 -**AT Command: AT+JOIN** 481 -{{/info}} 362 +AT Command: AT+JOIN 482 482 483 -(% border="1" style="background-color:#ffffcc; color:green; width:647.222px" %) 484 -|=(% colspan="3" style="width: 644px;" %)AT+JOIN 485 -|(% style="width:163px" %)**Command Example**|(% style="width:147px" %)**Function**|(% style="width:334px" %)**Response** 486 -|(% style="width:163px" %)AT+JOIN ?|(% style="width:147px" %)Get imformation.|(% style="width:334px" %)AT+JOIN: Join network((( 364 +|=(% colspan="3" %)AT+JOIN 365 +|**Command Example**|**Function**|**Response** 366 +|AT+JOIN ?|Get imformation.|AT+JOIN: Join network((( 487 487 OK 488 488 489 489 While Error in format, return AT_BUSY_ERROR ... ... @@ -493,42 +493,34 @@ 493 493 494 494 Feature: Get or Set the Network Join Mode. (0: ABP, 1: OTAA). 495 495 496 -{{info}} 497 -**AT Command: AT+NJM** 498 -{{/info}} 376 +AT Command: AT+NJM 499 499 500 -(% border="1" style="background-color:#ffffcc; color:green; width:753.222px" %) 501 -|=(% colspan="3" style="width: 750px;" %)AT+NJM 502 -|(% style="width:162px" %)**Command Example**|(% style="width:227px" %)**Function**|(% style="width:361px" %)**Response** 503 -|(% style="width:162px" %)AT+NJM=?|(% style="width:227px" %)Get the Network Join Mode|(% style="width:361px" %)1((( 378 +|=(% colspan="3" %)AT+NJM 379 +|**Command Example**|**Function**|**Response** 380 +|AT+NJM=?|Get the Network Join Mode|1((( 504 504 OK 505 505 ))) 506 -| (% style="width:162px" %)AT+NJM=0|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)OK507 -| (% style="width:162px" %)AT+NJM=2|(% style="width:227px" %)Set the Network Join Mode|(% style="width:361px" %)While Error in format, return AT_PARAM_ERROR383 +|AT+NJM=0|Set the Network Join Mode|OK 384 +|AT+NJM=2|Set the Network Join Mode|While Error in format, return AT_PARAM_ERROR 508 508 509 -{{info}} 510 -**Downlink Command: 0x20** 511 -{{/info}} 386 +Downlink Command: 0x20 512 512 513 513 Format: Command Code (0x20) followed by 1 bytes mode value. 514 514 515 515 If the downlink payload=2000, it means set the Network Join Mode, while type code is 20. 516 516 517 -* **Example 1:**Downlink Payload:**2000**~/~/ Set AT+NJM=O518 -* **Example 2:**Downlink Payload:**2001**~/~/ Set AT+NJM=1392 +* Example 1: Downlink Payload: 2000 ~/~/ Set AT+NJM=O 393 +* Example 2: Downlink Payload: 2001 ~/~/ Set AT+NJM=1 519 519 520 520 == 6.5 LoRa® Network Join Status == 521 521 522 522 Feature: LoRa® Network Join Status. 523 523 524 -{{info}} 525 -**AT Command: AT+NJS** 526 -{{/info}} 399 +AT Command: AT+NJS 527 527 528 -(% border="1" style="background-color:#ffffcc; color:green; width:498.222px" %) 529 -|=(% colspan="3" style="width: 495px;" %)AT+NJS 530 -|(% style="width:169px" %)**Command Example**|(% style="width:164px" %)**Function**|(% style="width:161px" %)**Response** 531 -|(% style="width:169px" %)AT+NJS=?|(% style="width:164px" %)Get the join status.|(% style="width:161px" %)0((( 401 +|=(% colspan="3" %)AT+NJS 402 +|**Command Example**|**Function**|**Response** 403 +|AT+NJS=?|Get the join status.|0((( 532 532 OK 533 533 ))) 534 534 ... ... @@ -536,14 +536,11 @@ 536 536 537 537 Feature: Print Last Received Data in Raw Format<port:data>. 538 538 539 -{{info}} 540 -**AT Command: AT+RECV** 541 -{{/info}} 411 +AT Command: AT+RECV 542 542 543 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 544 -|=(% colspan="3" style="width: 584px;" %)AT+RECV 545 -|(% style="width:161px" %)**Command Example**|(% style="width:272px" %)**Function**|(% style="width:150px" %)**Response** 546 -|(% style="width:161px" %)AT+RECV=?|(% style="width:272px" %)print last received data in raw format.|(% style="width:150px" %)0:((( 413 +|=(% colspan="3" %)AT+RECV 414 +|**Command Example**|**Function**|**Response** 415 +|AT+RECV=?|print last received data in raw format.|0:((( 547 547 OK 548 548 ))) 549 549 ... ... @@ -551,14 +551,11 @@ 551 551 552 552 Feature: Print Last Received Data in Binary Format<port:data>. 553 553 554 -{{info}} 555 -**AT Command: AT+RECVB** 556 -{{/info}} 423 +AT Command: AT+RECVB 557 557 558 -(% border="1" style="background-color:#ffffcc; color:green; width:793.222px" %) 559 -|=(% colspan="3" style="width: 790px;" %)AT+RECVB 560 -|(% style="width:173px" %)**Command Example**|(% style="width:497px" %)**Function**|(% style="width:120px" %)**Response** 561 -|(% style="width:173px" %)AT+RECVB=?|(% style="width:497px" %)print last received data in binary format (with hexadecimal values).|(% style="width:120px" %)2: 0010((( 425 +|=(% colspan="3" %)AT+RECVB 426 +|**Command Example**|**Function**|**Response** 427 +|AT+RECVB=?|print last received data in binary format (with hexadecimal values).|2: 0010((( 562 562 OK 563 563 ))) 564 564 ... ... @@ -566,14 +566,11 @@ 566 566 567 567 Feature: Send Text Data<port:data>. 568 568 569 -{{info}} 570 -**AT Command: AT+SEND** 571 -{{/info}} 435 +AT Command: AT+SEND 572 572 573 -(% border="1" style="background-color:#ffffcc; color:green; width:991.222px" %) 574 -|=(% colspan="3" style="width: 988px;" %)AT+SEND 575 -|(% style="width:201px" %)**Command Example**|(% style="width:340px" %)**Function**|(% style="width:446px" %)**Response** 576 -|(% style="width:201px" %)AT+SEND=12:hello world|(% style="width:340px" %)Send text data along with the application port.|(% style="width:446px" %)OK((( 437 +|=(% colspan="3" %)AT+SEND 438 +|**Command Example**|**Function**|**Response** 439 +|AT+SEND=12:hello world|Send text data along with the application port.|OK((( 577 577 While Error in format, return 578 578 579 579 AT_BUSY_ERROR/AT_BUSY_ERROR/AT_NO_NETWORK_JOINED ... ... @@ -585,15 +585,12 @@ 585 585 586 586 Feature: Send hexadecimal data along with the application port. 587 587 588 -{{info}} 589 -**AT Command: AT+SENDB** 590 -{{/info}} 451 +AT Command: AT+SENDB 591 591 592 -(% border="1" style="background-color:#ffffcc; color:green; width:1120.22px" %) 593 -|=(% colspan="3" style="width: 1117px;" %)AT+SENDB 594 -|(% style="width:257px" %)**Command Example**|(% style="width:406px" %)**Function**|(% style="width:453px" %)**Response** 595 -|(% style="width:257px" %)AT+SENDB=12:abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)OK 596 -|(% style="width:257px" %)AT+SENDB=abcdef0123456789|(% style="width:406px" %)Send hexadecimal data along with the application port.|(% style="width:453px" %)While Error in format, return((( 453 +|=(% colspan="3" %)AT+SENDB 454 +|**Command Example**|**Function**|**Response** 455 +|AT+SENDB=12:abcdef0123456789|Send hexadecimal data along with the application port.|OK 456 +|AT+SENDB=abcdef0123456789|Send hexadecimal data along with the application port.|While Error in format, return((( 597 597 AT_PARAM_ERROR AT_BUSY_ERROR/AT_NO_NETWORK_JOINED 598 598 599 599 ... ... @@ -605,46 +605,39 @@ 605 605 606 606 Feature: Get or Set the Adaptive Data Rate setting. (0: off, 1: on). 607 607 608 -{{info}} 609 -**AT Command: AT+ADR** 610 -{{/info}} 611 611 612 -(% border="1" style="background-color:#ffffcc; color:green; width:683.222px" %) 613 -|=(% colspan="3" style="width: 680px;" %)AT+ADR 614 -|(% style="width:162px" %)**Command Example**|(% style="width:266px" %)**Function**|(% style="width:250px" %)**Response** 615 -|(% style="width:162px" %)AT+ADR=?|(% style="width:266px" %)Get the Adaptive Data Rate setting.|(% style="width:250px" %)1((( 469 +AT Command: AT+ADR 470 + 471 +|=(% colspan="3" %)AT+ADR 472 +|**Command Example**|**Function**|**Response** 473 +|AT+ADR=?|Get the Adaptive Data Rate setting.|1((( 616 616 OK 617 617 ))) 618 -| (% style="width:162px" %)AT+ADR=0|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)OK619 -| (% style="width:162px" %)AT+ADR=2|(% style="width:266px" %)Set the Adaptive Data Rate setting.|(% style="width:250px" %)While Error in format, return(((476 +|AT+ADR=0|Set the Adaptive Data Rate setting.|OK 477 +|AT+ADR=2|Set the Adaptive Data Rate setting.|While Error in format, return((( 620 620 AT_PARAM_ERROR 621 621 ))) 622 622 623 -{{info}} 624 -**Downlink Command: 0x22** 625 -{{/info}} 481 +Downlink Command: 0x22 626 626 627 627 628 628 If the downlink payload=2201, it means setting the adaptive data rate to 1, while type code is 22. 629 629 630 -* **Example 1**: Downlink Payload:**2201**~/~/ Set AT+ADR=1.631 -* **Example 2**: Downlink Payload:**2200FFFF**~/~/ Set AT+ADR=0.486 +* Example 1: Downlink Payload: 2201 ~/~/ Set AT+ADR=1. 487 +* Example 2: Downlink Payload: 2200FFFF ~/~/ Set AT+ADR=0. 632 632 633 633 == 7.2 LoRa® Class == 634 634 635 635 Feature: Get or Set the Device Class(Currently only support class A, class C). 636 636 637 -{{info}} 638 -**AT Command:AT+CLASS** 639 -{{/info}} 493 +AT Command:AT+CLASS 640 640 641 -(% border="1" style="background-color:#ffffcc; color:green; width:507.222px" %) 642 -|=(% colspan="3" style="width: 504px;" %)AT+CLASS 643 -|(% style="width:163px" %)**Command Example**|(% style="width:166px" %)**Function**|(% style="width:175px" %)**Response** 644 -|(% style="width:163px" %)AT+CLASS=?|(% style="width:166px" %)Get the Device Class.|(% style="width:175px" %)A((( 495 +|=(% colspan="3" %)AT+CLASS 496 +|**Command Example**|**Function**|**Response** 497 +|AT+CLASS=?|Get the Device Class.|A((( 645 645 OK 646 646 ))) 647 -| (% style="width:163px" %)AT+CLASS=C|(% style="width:166px" %)Set the Device Class.|(% style="width:175px" %)OK(((500 +|AT+CLASS=C|Set the Device Class.|OK((( 648 648 649 649 ))) 650 650 ... ... @@ -652,17 +652,14 @@ 652 652 653 653 Feature: Get or Set the ETSI Duty Cycle setting - 0=disable, 1=enable - Only for testing. 654 654 655 -{{info}} 656 -**AT Command:AT+DCS** 657 -{{/info}} 508 +AT Command:AT+DCS 658 658 659 -(% border="1" style="background-color:#ffffcc; color:green; width:515.222px" %) 660 -|=(% colspan="3" style="width: 512px;" %)AT+DCS 661 -|(% style="width:165px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:107px" %)**Response** 662 -|(% style="width:165px" %)AT+DCS=?|(% style="width:239px" %)Get the ETSI Duty Cycle setting.|(% style="width:107px" %)1((( 510 +|=(% colspan="3" %)AT+DCS 511 +|**Command Example**|**Function**|**Response** 512 +|AT+DCS=?|Get the ETSI Duty Cycle setting.|1((( 663 663 OK 664 664 ))) 665 -| (% style="width:165px" %)AT+DCS=1|(% style="width:239px" %)Set the ETSI Duty Cycle setting.|(% style="width:107px" %)OK(((515 +|AT+DCS=1|Set the ETSI Duty Cycle setting.|OK((( 666 666 667 667 ))) 668 668 ... ... @@ -670,45 +670,37 @@ 670 670 671 671 Feature: Get or Set the Data Rate. (0-7 corresponding to DR_X) . Note: while set Data Rate, please use set Adptive Data Rate, ADR=0 first. otherwise device will response to server's ADR command and change the DR to the setting from server 672 672 673 -{{info}} 674 -**AT Command: AT+DR** 675 -{{/info}} 523 +AT Command: AT+DR 676 676 677 -(% border="1" style="background-color:#ffffcc; color:green; width:466.222px" %) 678 -|=(% colspan="3" style="width: 463px;" %)AT+DR 679 -|(% style="width:156px" %)**Command Example**|(% style="width:167px" %)**Function**|(% style="width:140px" %)**Response** 680 -|(% style="width:156px" %)AT+DR=?|(% style="width:167px" %)Get the Data Rate.|(% style="width:140px" %)5((( 525 +|=(% colspan="3" %)AT+DR 526 +|**Command Example**|**Function**|**Response** 527 +|AT+DR=?|Get the Data Rate.|5((( 681 681 OK 682 682 ))) 683 -| (% style="width:156px" %)AT+DR=2|(% style="width:167px" %)Set the Data Rate.|(% style="width:140px" %)OK(((530 +|AT+DR=2|Set the Data Rate.|OK((( 684 684 685 685 ))) 686 686 687 -{{info}} 688 -**Downlink Command: 0x2200aaFF** 689 -{{/info}} 534 +Downlink Command: 0x2200aaFF 690 690 691 691 692 692 If the downlink payload=220001FF, it means setting the data rate to 1, while type code is 22 00 aa FF. 693 693 694 -* **Example 1**: Downlink Payload:**220001FF**~/~/ Set AT+DR=1.695 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+DR=0.539 +* Example 1: Downlink Payload: 220001FF ~/~/ Set AT+DR=1. 540 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+DR=0. 696 696 697 697 == 7.5 Frame Counter Downlink == 698 698 699 699 Feature: Get or Set the Frame Counter Downlink. 700 700 701 -{{info}} 702 -**AT Command:AT+FCD** 703 -{{/info}} 546 +AT Command:AT+FCD 704 704 705 -(% border="1" style="background-color:#ffffcc; color:green; width:693.222px" %) 706 -|=(% colspan="3" style="width: 690px;" %)AT+FCD 707 -|(% style="width:162px" %)**Command Example**|(% style="width:258px" %)**Function**|(% style="width:269px" %)**Response** 708 -|(% style="width:162px" %)AT+FCD=?|(% style="width:258px" %)Get the Frame Counter Downlink.|(% style="width:269px" %)0((( 548 +|=(% colspan="3" %)AT+FCD 549 +|**Command Example**|**Function**|**Response** 550 +|AT+FCD=?|Get the Frame Counter Downlink.|0((( 709 709 OK 710 710 ))) 711 -| (% style="width:162px" %)AT+FCD=10|(% style="width:258px" %)Set the Frame Counter Downlink.|(% style="width:269px" %)(System will write new value to FCD)(((553 +|AT+FCD=10|Set the Frame Counter Downlink.|(System will write new value to FCD)((( 712 712 OK 713 713 714 714 ... ... @@ -718,17 +718,14 @@ 718 718 719 719 Feature: Get or Set the Frame Counter Uplink. 720 720 721 -{{info}} 722 -**AT Command:AT+FCU** 723 -{{/info}} 563 +AT Command:AT+FCU 724 724 725 -(% border="1" style="background-color:#ffffcc; color:green; width:534.222px" %) 726 -|=(% colspan="3" style="width: 531px;" %)AT+FCU 727 -|(% style="width:177px" %)**Command Example**|(% style="width:239px" %)**Function**|(% style="width:113px" %)**Response** 728 -|(% style="width:177px" %)AT+FCU=?|(% style="width:239px" %)Get the Frame Counter Uplink.|(% style="width:113px" %)0((( 565 +|=(% colspan="3" %)AT+FCU 566 +|**Command Example**|**Function**|**Response** 567 +|AT+FCU=?|Get the Frame Counter Uplink.|0((( 729 729 OK 730 730 ))) 731 -| (% style="width:177px" %)AT+FCU=10|(% style="width:239px" %)Set the Frame Counter Uplink.|(% style="width:113px" %)OK(((570 +|AT+FCU=10|Set the Frame Counter Uplink.|OK((( 732 732 733 733 ))) 734 734 ... ... @@ -736,17 +736,14 @@ 736 736 737 737 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 1 in ms. 738 738 739 -{{info}} 740 -**AT Command:AT+JN1DL** 741 -{{/info}} 578 +AT Command:AT+JN1DL 742 742 743 -(% border="1" style="background-color:#ffffcc; color:green; width:537.222px" %) 744 -|=(% colspan="3" style="width: 534px;" %)AT+JN1DL 745 -|(% style="width:164px" %)**Command Example**|(% style="width:229px" %)**Function**|(% style="width:140px" %)**Response** 746 -|(% style="width:164px" %)AT+JN1DL=?|(% style="width:229px" %)Get the Join Accept Delay.|(% style="width:140px" %)5000((( 580 +|=(% colspan="3" %)AT+JN1DL 581 +|**Command Example**|**Function**|**Response** 582 +|AT+JN1DL=?|Get the Join Accept Delay.|5000((( 747 747 OK 748 748 ))) 749 -| (% style="width:164px" %)AT+JN1DL=10000|(% style="width:229px" %)Set the Join Accept Delay.|(% style="width:140px" %)OK(((585 +|AT+JN1DL=10000|Set the Join Accept Delay.|OK((( 750 750 751 751 ))) 752 752 ... ... @@ -754,17 +754,14 @@ 754 754 755 755 Feature: Get or Set the Join Accept Delay between the end of the Tx and the Join Rx Window 2 in ms. 756 756 757 -{{info}} 758 -**AT Command:AT+JN2DL** 759 -{{/info}} 593 +AT Command:AT+JN2DL 760 760 761 -(% border="1" style="background-color:#ffffcc; color:green; width:538.222px" %) 762 -|=(% colspan="3" style="width: 535px;" %)AT+JN2DL 763 -|(% style="width:160px" %)**Command Example**|(% style="width:228px" %)**Function**|(% style="width:146px" %)**Response** 764 -|(% style="width:160px" %)AT+JN2DL=?|(% style="width:228px" %)Get the Join Accept Delay.|(% style="width:146px" %)6000((( 595 +|=(% colspan="3" %)AT+JN2DL 596 +|**Command Example**|**Function**|**Response** 597 +|AT+JN2DL=?|Get the Join Accept Delay.|6000((( 765 765 OK 766 766 ))) 767 -| (% style="width:160px" %)AT+JN2DL=20000|(% style="width:228px" %)Set the Join Accept Delay.|(% style="width:146px" %)OK(((600 +|AT+JN2DL=20000|Set the Join Accept Delay.|OK((( 768 768 769 769 ))) 770 770 ... ... @@ -772,17 +772,14 @@ 772 772 773 773 Feature: Get or Set the public network mode. (0: off, 1: on) 774 774 775 -{{info}} 776 -**AT Command:AT+PNM** 777 -{{/info}} 608 +AT Command:AT+PNM 778 778 779 -(% border="1" style="background-color:#ffffcc; color:green; width:667.222px" %) 780 -|=(% colspan="3" style="width: 664px;" %)AT+PNM 781 -|(% style="width:166px" %)**Command Example**|(% style="width:225px" %)**Function**|(% style="width:272px" %)**Response** 782 -|(% style="width:166px" %)AT+PNM=?|(% style="width:225px" %)Get the public network mode.|(% style="width:272px" %)1((( 610 +|=(% colspan="3" %)AT+PNM 611 +|**Command Example**|**Function**|**Response** 612 +|AT+PNM=?|Get the public network mode.|1((( 783 783 OK 784 784 ))) 785 -| (% style="width:166px" %)AT+PNM=1|(% style="width:225px" %)Set the public network mode.|(% style="width:272px" %)(System will write new value to PNM)(((615 +|AT+PNM=1|Set the public network mode.|(System will write new value to PNM)((( 786 786 OK 787 787 788 788 ... ... @@ -792,35 +792,29 @@ 792 792 793 793 Feature: Get or Set the delay between the end of the Tx and the Rx Window 1 in ms 794 794 795 -{{info}} 796 -**AT Command:AT+RX1DL** 797 -{{/info}} 625 +AT Command:AT+RX1DL 798 798 799 -(% border="1" style="background-color:#ffffcc; color:green; width:408.222px" %) 800 -|=(% colspan="3" style="width: 405px;" %)AT+RX1DL 801 -|(% style="width:155px" %)**Command Example**|(% style="width:128px" %)**Function**|(% style="width:122px" %)**Response** 802 -|(% style="width:155px" %)AT+RX1DL=?|(% style="width:128px" %)Get the delay.|(% style="width:122px" %)1000((( 627 +|=(% colspan="3" %)AT+RX1DL 628 +|**Command Example**|**Function**|**Response** 629 +|AT+RX1DL=?|Get the delay.|1000((( 803 803 OK 804 804 ))) 805 -| (% style="width:155px" %)AT+RX1DL=1500|(% style="width:128px" %)Set the delay.|(% style="width:122px" %)OK(((632 +|AT+RX1DL=1500|Set the delay.|OK((( 806 806 807 807 ))) 808 808 809 -== 7.11 636 +== 7.11Receive Delay2 == 810 810 811 811 Feature: Get or Set the delay between the end of the Tx and the Rx Window 2 in ms 812 812 813 -{{info}} 814 -**AT Command:AT+RX2DL** 815 -{{/info}} 640 +AT Command:AT+RX2DL 816 816 817 -(% border="1" style="background-color:#ffffcc; color:green; width:481.222px" %) 818 -|=(% colspan="3" style="width: 478px;" %)AT+RX2DL 819 -|(% style="width:175px" %)**Command Example**|(% style="width:152px" %)**Function**|(% style="width:150px" %)**Response** 820 -|(% style="width:175px" %)AT+RX2DL=?|(% style="width:152px" %)Get the delay.|(% style="width:150px" %)2000((( 642 +|=(% colspan="3" %)AT+RX2DL 643 +|**Command Example**|**Function**|**Response** 644 +|AT+RX2DL=?|Get the delay.|2000((( 821 821 OK 822 822 ))) 823 -| (% style="width:175px" %)AT+RX2DL=2500|(% style="width:152px" %)Set the delay.|(% style="width:150px" %)OK(((647 +|AT+RX2DL=2500|Set the delay.|OK((( 824 824 825 825 ))) 826 826 ... ... @@ -828,17 +828,14 @@ 828 828 829 829 Feature: Get or Set the Rx2 window data rate (0-7 corresponding to DR_X) 830 830 831 -{{info}} 832 -**AT Command:AT+RX2DR** 833 -{{/info}} 655 +AT Command:AT+RX2DR 834 834 835 -(% border="1" style="background-color:#ffffcc; color:green; width:525.222px" %) 836 -|=(% colspan="3" style="width: 522px;" %)AT+RX2DR 837 -|(% style="width:160px" %)**Command Example**|(% style="width:232px" %)**Function**|(% style="width:130px" %)**Response** 838 -|(% style="width:160px" %)AT+RX2DR=?|(% style="width:232px" %)Get the Rx2 window data rate.|(% style="width:130px" %)2((( 657 +|=(% colspan="3" %)AT+RX2DR 658 +|**Command Example**|**Function**|**Response** 659 +|AT+RX2DR=?|Get the Rx2 window data rate.|2((( 839 839 OK 840 840 ))) 841 -| (% style="width:160px" %)AT+RX2DR=6|(% style="width:232px" %)Set the Rx2 window data rate.|(% style="width:130px" %)OK(((662 +|AT+RX2DR=6|Set the Rx2 window data rate.|OK((( 842 842 843 843 ))) 844 844 ... ... @@ -846,17 +846,14 @@ 846 846 847 847 Feature: Get or Set the Rx2 window frequency 848 848 849 -{{info}} 850 -**AT Command:AT+RX2FQ** 851 -{{/info}} 670 +AT Command:AT+RX2FQ 852 852 853 -(% border="1" style="background-color:#ffffcc; color:green; width:587.222px" %) 854 -|=(% colspan="3" style="width: 584px;" %)AT+RX2FQ 855 -|(% style="width:183px" %)**Command Example**|(% style="width:240px" %)**Function**|(% style="width:160px" %)**Response** 856 -|(% style="width:183px" %)AT+RX2FQ=?|(% style="width:240px" %)Get the Rx2 window frequency.|(% style="width:160px" %)434665000((( 672 +|=(% colspan="3" %)AT+RX2FQ 673 +|**Command Example**|**Function**|**Response** 674 +|AT+RX2FQ=?|Get the Rx2 window frequency.|434665000((( 857 857 OK 858 858 ))) 859 -| (% style="width:183px" %)AT+RX2FQ=434665000|(% style="width:240px" %)Set the Rx2 window frequency.|(% style="width:160px" %)OK(((677 +|AT+RX2FQ=434665000|Set the Rx2 window frequency.|OK((( 860 860 861 861 ))) 862 862 ... ... @@ -864,17 +864,14 @@ 864 864 865 865 Feature: Get or Set the Transmit Power(0-5, MAX:0, MIN:5, according to LoRaWAN Spec, or 40=10dB, 41 = 11dB, …, 50 = 20dB which is out of LoRaWAN spec. ) 866 866 867 -{{info}} 868 -**AT Command:AT+TXP** 869 -{{/info}} 685 +AT Command:AT+TXP 870 870 871 -(% border="1" style="background-color:#ffffcc; color:green; width:465.222px" %) 872 -|=(% colspan="3" style="width: 462px;" %)AT+TXP 873 -|(% style="width:161px" %)**Command Example**|(% style="width:189px" %)**Function**|(% style="width:112px" %)**Response** 874 -|(% style="width:161px" %)AT+TXP=?|(% style="width:189px" %)Get the Transmit Power.|(% style="width:112px" %)0((( 687 +|=(% colspan="3" %)AT+TXP 688 +|**Command Example**|**Function**|**Response** 689 +|AT+TXP=?|Get the Transmit Power.|0((( 875 875 OK 876 876 ))) 877 -| (% style="width:161px" %)AT+TXP=1|(% style="width:189px" %)Set the Transmit Power.|(% style="width:112px" %)OK(((692 +|AT+TXP=1|Set the Transmit Power.|OK((( 878 878 879 879 ))) 880 880 ... ... @@ -882,21 +882,18 @@ 882 882 883 883 If the downlink payload=22000100, it means setting the TXP to 0. 884 884 885 -* **Example 1**: Downlink Payload:**22000102**~/~/ Set AT+TXP=2.886 -* **Example 2**: Downlink Payload:**220000FF**~/~/ Set AT+TXP=0.700 +* Example 1: Downlink Payload: 22000102 ~/~/ Set AT+TXP=2. 701 +* Example 2: Downlink Payload: 220000FF ~/~/ Set AT+TXP=0. 887 887 888 888 == 7.15 RSSI of the Last Received Packet == 889 889 890 890 Feature: Get or Set the Rx2 window frequency 891 891 892 -{{info}} 893 -**AT Command:AT+RSSI** 894 -{{/info}} 707 +AT Command:AT+RSSI 895 895 896 -(% border="1" style="background-color:#ffffcc; color:green; width:557.222px" %) 897 -|=(% colspan="3" style="width: 554px;" %)AT+RSSI 898 -|(% style="width:164px" %)**Command Example**|(% style="width:289px" %)**Function**|(% style="width:100px" %)**Response** 899 -|(% style="width:164px" %)AT+RSSI=?|(% style="width:289px" %)Get the RSSI of the last received packet.|(% style="width:100px" %)0((( 709 +|=(% colspan="3" %)AT+RSSI 710 +|**Command Example**|**Function**|**Response** 711 +|AT+RSSI=?|Get the RSSI of the last received packet.|0((( 900 900 OK 901 901 ))) 902 902 ... ... @@ -904,14 +904,11 @@ 904 904 905 905 Feature: Get the SNR of the last received packet 906 906 907 -{{info}} 908 -**AT Command:AT+SNR** 909 -{{/info}} 719 +AT Command:AT+SNR 910 910 911 -(% border="1" style="background-color:#ffffcc; color:green; width:571.222px" %) 912 -|=(% colspan="3" style="width: 568px;" %)AT+SNR 913 -|(% style="width:164px" %)**Command Example**|(% style="width:290px" %)**Function**|(% style="width:113px" %)**Response** 914 -|(% style="width:164px" %)AT+SNR=?|(% style="width:290px" %)Get the RSSI of the last received packet.|(% style="width:113px" %)0((( 721 +|=(% colspan="3" %)AT+SNR 722 +|**Command Example**|**Function**|**Response** 723 +|AT+SNR=?|Get the RSSI of the last received packet.|0((( 915 915 OK 916 916 ))) 917 917 ... ... @@ -919,144 +919,114 @@ 919 919 920 920 Feature: Get or set the application port. 921 921 922 -{{info}} 923 -**AT Command: AT+PORT** 924 -{{/info}} 731 +AT Command: AT+PORT 925 925 926 -(% border="1" style="background-color:#ffffcc; color:green; width:500.222px" %) 927 -|=(% colspan="3" style="width: 497px;" %)AT+PORT 928 -|(% style="width:157px" %)**Command Example**|(% style="width:204px" %)**Function**|(% style="width:135px" %)**Response** 929 -|(% style="width:157px" %)AT+PORT=?|(% style="width:204px" %)Get the application port|(% style="width:135px" %)21((( 733 +|=(% colspan="3" %)AT+PORT 734 +|**Command Example**|**Function**|**Response** 735 +|AT+PORT=?|Get the application port|21((( 930 930 OK 931 931 ))) 932 -| (% style="width:157px" %)AT+PORT=21|(% style="width:204px" %)Set the application port|(% style="width:135px" %)OK738 +|AT+PORT=21|Set the application port|OK 933 933 934 -{{info}} 935 -**Downlink Command: 0x23** 936 -{{/info}} 740 +Downlink Command: 0x23 937 937 938 938 Format: Command Code (0x23) followed by 1 bytes port value. 939 939 940 940 If the downlink payload=2301, it means set the application port to 1, while type code is 23. 941 941 942 -* **Example 1**: Downlink Payload:**2301**~/~/ set the application port to 1943 -* **Example 2**: Downlink Payload:**2305**~/~/ set the application port to 5746 +* Example 1: Downlink Payload: 2301 ~/~/ set the application port to 1 747 +* Example 2: Downlink Payload: 2305 ~/~/ set the application port to 5 944 944 945 945 == 7.18 Single Channel Mode == 946 946 947 947 Feature:Get or Set Frequency (Unit: Hz) for Single Channel Mode. 948 948 949 -{{info}} 950 -**AT Command: AT+CHS** 951 -{{/info}} 753 +AT Command: AT+CHS 952 952 953 -(% border="1" style="background-color:#ffffcc; color:green; width:603.222px" %) 954 -|=(% colspan="3" style="width: 600px;" %)AT+CHS 955 -|(% style="width:182px" %)**Command Example**|(% style="width:295px" %)**Function**|(% style="width:122px" %)**Response** 956 -|(% style="width:182px" %)AT+CHS=?|(% style="width:295px" %)Get Frequency for Single Channel Mode|(% style="width:122px" %)0((( 755 +|=(% colspan="3" %)AT+CHS 756 +|**Command Example**|**Function**|**Response** 757 +|AT+CHS=?|Get Frequency for Single Channel Mode|0((( 957 957 OK 958 958 ))) 959 -| (% style="width:182px" %)AT+CHS=868100000|(% style="width:295px" %)Set Frequency for Single Channel Mode|(% style="width:122px" %)OK760 +|AT+CHS=868100000|Set Frequency for Single Channel Mode|OK 960 960 961 961 == 7.19 Eight Channel Mode == 962 962 963 963 Feature: Get or Set eight channels mode,Only for US915,AU915,CN470. 964 964 965 -{{info}} 966 -**AT Command: AT+CHE** 967 -{{/info}} 766 +AT Command: AT+CHE 968 968 969 -(% border="1" style="background-color:#ffffcc; color:green; width:710.222px" %) 970 -|=(% colspan="3" style="width: 707px;" %)AT+CHE 971 -|(% style="width:160px" %)**Command Example**|(% style="width:198px" %)**Function**|(% style="width:349px" %)**Response** 972 -|(% style="width:160px" %)AT+CHE=?|(% style="width:198px" %)Get eight channels mode|(% style="width:349px" %)1((( 768 +|=(% colspan="3" %)AT+CHE 769 +|**Command Example**|**Function**|**Response** 770 +|AT+CHE=?|Get eight channels mode|1((( 973 973 902.3 902.5 902.7 902.9 903.1 903.3 903.5 903.7 974 974 975 975 OK 976 976 ))) 977 -| (% style="width:160px" %)AT+CHE=1|(% style="width:198px" %)Set eight channels mode|(% style="width:349px" %)OK775 +|AT+CHE=1|Set eight channels mode|OK 978 978 979 -{{info}} 980 -**Downlink Command: 0x24** 981 -{{/info}} 777 +Downlink Command: 0x24 982 982 983 983 Format: Command Code (0x24) followed by 1 bytes channel value. 984 984 985 985 If the downlink payload=2401, it means set channel mode to 1, while type code is 24. 986 986 987 -* **Example 1**: Downlink Payload: 2401 ~/~/ set channel mode to 1988 -* **Example 2**: Downlink Payload: 2405 ~/~/ set channel mode to 5783 +* Example 1: Downlink Payload: 2401 ~/~/ set channel mode to 1 784 +* Example 2: Downlink Payload: 2405 ~/~/ set channel mode to 5 989 989 990 990 == 7.20 Get or Set RXwindows1 timeout == 991 991 992 992 Feature:Get or Set the number of symbols to detect and timeout from RXwindow1(0 to 255). 993 993 994 -{{info}} 995 -**AT Command: AT+RX1WTO** 996 -{{/info}} 790 +AT Command: AT+RX1WTO 997 997 998 -(% border="1" style="background-color:#ffffcc; color:green; width:460.222px" %) 999 -|=(% colspan="3" style="width: 457px;" %)AT+ RX1WTO 1000 -|(% style="width:163px" %)**Command Example**|(% style="width:201px" %)**Function**|(% style="width:93px" %)**Response** 1001 -|(% style="width:163px" %)AT+RX1WTO=?|(% style="width:201px" %)Get RXwindows1 timeout|(% style="width:93px" %)14((( 792 +|=(% colspan="3" %)AT+ RX1WTO 793 +|**Command Example**|**Function**|**Response** 794 +|AT+RX1WTO=?|Get RXwindows1 timeout|14((( 1002 1002 OK 1003 1003 ))) 1004 -| (% style="width:163px" %)AT+RX1WTO=60|(% style="width:201px" %)Set RXwindows1 timeout|(% style="width:93px" %)OK797 +|AT+RX1WTO=60|Set RXwindows1 timeout|OK 1005 1005 1006 -((( 1007 -**AT+RX1TWO** is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1008 -))) 799 +AT+RX1TWO is theRxSingle timeout value of receive window 1. If it is not set, then the queriedvalue is the default value. If it is set, then the queried value is the setvalue. AT+RX2TWO is thesame as above. The definitionof RxSingle timeout is as described in the following paragraph. 1009 1009 1010 -[[image:image -20220526162535-1.png]]801 +[[~[~[image:https://wiki.dragino.com/images/thumb/5/51/RX1WTO.JPG/600px-RX1WTO.JPG~|~|alt="RX1WTO.JPG" height="239" width="600"~]~]>>url:https://wiki.dragino.com/index.php/File:RX1WTO.JPG]] 1011 1011 1012 -((( 1013 1013 Increasing thisvalue is equal to extending the time that the receiving window is opened, butthe corresponding power consumption will also increase. Properly increasingthis value can increase the success rate of the downlink. 1014 1014 1015 - 1016 -))) 1017 - 1018 1018 == 7.21 Get or Set RXwindows2 timeout == 1019 1019 1020 1020 Feature:Get or Set the number of symbols to detect and timeout from RXwindow2(0 to 255). 1021 1021 1022 -{{info}} 1023 -**AT Command: AT+RX2WTO** 1024 -{{/info}} 809 +AT Command: AT+RX2WTO 1025 1025 1026 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1027 -|=(% colspan="3" style="width: 494px;" %)AT+ RX2WTO 1028 -|(% style="width:190px" %)**Command Example**|(% style="width:199px" %)**Function**|(% style="width:104px" %)**Response** 1029 -|(% style="width:190px" %)AT+RX2WTO=?|(% style="width:199px" %)Get RXwindows2 timeout|(% style="width:104px" %)7((( 811 +|=(% colspan="3" %)AT+ RX2WTO 812 +|**Command Example**|**Function**|**Response** 813 +|AT+RX2WTO=?|Get RXwindows2 timeout|7((( 1030 1030 OK 1031 1031 ))) 1032 -| (% style="width:190px" %)AT+RX2WTO=20|(% style="width:199px" %)Set RXwindows2 timeout|(% style="width:104px" %)OK816 +|AT+RX2WTO=20|Set RXwindows2 timeout|OK 1033 1033 1034 1034 == 7.22 Setting up uplinkdwelltime (as923, au915) == 1035 1035 1036 1036 Feature: Get or Set uplinkdwelltime 1037 1037 1038 -{{info}} 1039 -**AT Command: AT+DWELLT** 1040 -{{/info}} 822 +AT Command: AT+DWELLT 1041 1041 1042 -(% border="1" style="background-color:#ffffcc; color:green; width:497.222px" %) 1043 -|=(% colspan="3" style="width: 494px;" %)AT+DWELLT 1044 -|(% style="width:183px" %)**Command Example**|(% style="width:179px" %)**Function**|(% style="width:131px" %)**Response** 1045 -|(% style="width:183px" %)AT+DWELLT=?|(% style="width:179px" %)Get uplinkdwelltime|(% style="width:131px" %)1((( 824 +|=(% colspan="3" %)AT+DWELLT 825 +|**Command Example**|**Function**|**Response** 826 +|AT+DWELLT=?|Get uplinkdwelltime|1((( 1046 1046 OK 1047 1047 ))) 1048 -| (% style="width:183px" %)AT+DWELLT=0|(% style="width:179px" %)Set uplinkdwelltime|(% style="width:131px" %)OK829 +|AT+DWELLT=0|Set uplinkdwelltime|OK 1049 1049 1050 -{{info}} 1051 -**Downlink Command: 0x25** 1052 -{{/info}} 831 +Downlink Command: 0x25 1053 1053 1054 1054 Format: Command Code (0x25) followed by 1 bytes state value. 1055 1055 1056 1056 If the downlink payload=2501, it means set uplinkdwelltime to 1, while type code is 25. 1057 1057 1058 -* **Example 1**: Downlink Payload:**2501**~/~/ set uplinkdwelltime to 11059 -* **Example 2**: Downlink Payload:**2500**~/~/ set uplinkdwelltime to 0837 +* Example 1: Downlink Payload: 2501 ~/~/ set uplinkdwelltime to 1 838 +* Example 2: Downlink Payload: 2500 ~/~/ set uplinkdwelltime to 0 1060 1060 1061 1061 == 7.23 Set Packet Receiving Response Level == 1062 1062 ... ... @@ -1064,11 +1064,11 @@ 1064 1064 1065 1065 RPL value: 1066 1066 1067 -* **AT+RPL=0:**Device won't immediately reply any downlink commands from platform.1068 -* **AT+RPL=1:**Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00.1069 -* **AT+RPL=2:**Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command.1070 -* **AT+RPL=3:**Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command.1071 -* **AT+RPL=4:**Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands.846 +* AT+RPL=0: Device won't immediately reply any downlink commands from platform. 847 +* AT+RPL=1: Device will immediately reply message to Unconfirmed Data Down. Payload is 0x00. 848 +* AT+RPL=2: Device will immediately reply message to Confirmed Data Down. Payload is 0x00 and requied response header for this command. 849 +* AT+RPL=3: Device will immediately reply message to MAC Command. Payload is 0x00 and requied response header for this command. 850 +* AT+RPL=4: Device will immediately reply message to Confirmed Data Down & MAC Command. Payload is 0x00 and requied response header for these two commands. 1072 1072 1073 1073 Case Analyes: 1074 1074 ... ... @@ -1076,44 +1076,37 @@ 1076 1076 * For Class C devices used in ChirpStack, need to set AT+RPL=4 because Chirpstack require immedietely reply message to MAC Command. 1077 1077 * For Class C devices used in TTI, need to set AT+RPL=4 because TTI require immediately reply message to Confirmed Data Down & MAC Command. 1078 1078 1079 -{{info}} 1080 -**AT Command: AT+RPL** 1081 -{{/info}} 858 +AT Command: AT+RPL 1082 1082 1083 -(% border="1" style="background-color:#ffffcc; color:green; width:536.222px" %) 1084 -|=(% colspan="3" style="width: 533px;" %)AT+RPL 1085 -|(% style="width:160px" %)**Command Example**|(% style="width:263px" %)**Function**|(% style="width:109px" %)**Response** 1086 -|(% style="width:160px" %)AT+RPL=?|(% style="width:263px" %)Get packet receiving response level|(% style="width:109px" %)1((( 860 +|=(% colspan="3" %)AT+RPL 861 +|**Command Example**|**Function**|**Response** 862 +|AT+RPL=?|Get packet receiving response level|1((( 1087 1087 OK 1088 1088 ))) 1089 -| (% style="width:160px" %)AT+RPL=0|(% style="width:263px" %)Set packet receiving response level|(% style="width:109px" %)OK865 +|AT+RPL=0|Set packet receiving response level|OK 1090 1090 1091 -{{info}} 1092 -**Downlink Command: 0x21** 1093 -{{/info}} 867 +Downlink Command: 0x21 1094 1094 1095 1095 Format: Command Code (0x21) followed by 1 bytes level value. 1096 1096 1097 1097 If the downlink payload=2101, it means set packet receiving response level to 1, while type code is 21. 1098 1098 1099 -* **Example 1**: Downlink Payload:**2101**~/~/ set packet receiving response level to 11100 -* **Example 2**: Downlink Payload:**2102**~/~/ set packet receiving response level to 2873 +* Example 1: Downlink Payload: 2101 ~/~/ set packet receiving response level to 1 874 +* Example 2: Downlink Payload: 2102 ~/~/ set packet receiving response level to 2 1101 1101 1102 1102 = 8. AT Commands Combination = 1103 1103 1104 1104 == 8.1 Set a fix RX2DR for downlink window == 1105 1105 1106 -* **AT+ADR=0**~-~-> Disable ADR first1107 -* **AT+RX2DR=xxxx**~-~-> Set xxxx to your wanted DataRate880 +* AT+ADR=0 ~-~-> Disable ADR first 881 +* AT+RX2DR=xxxx ~-~-> Set xxxx to your wanted DataRate 1108 1108 1109 1109 == 8.2 Use Downlink Command to set a fix uplink DR == 1110 1110 1111 -{{info}} 1112 -**Downlink Command: 0x22000500** 1113 -{{/info}} 885 +Downlink Command: 0x22000500 1114 1114 1115 1115 Same as: 1116 1116 1117 -* AT+ADR=0 ||anchor="H7.1AdaptiveDataRate"]]1118 -* AT+DR=5 ||anchor="H7.4DataRate"]]1119 -* AT+TXP=0 ||anchor="H7.14TransmitPower"]]889 +* AT+ADR=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Adaptive_Data_Rate]] 890 +* AT+DR=5 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Data_Rate]] 891 +* AT+TXP=0 [[Reference>>url:https://wiki.dragino.com/index.php/End_Device_Downlink_Command#Transmit_Power]]
- image-20220511120050-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -136.3 KB - Content
- image-20220526162535-1.png
-
- Author
-
... ... @@ -1,1 +1,0 @@ 1 -XWiki.Xiaoling - Size
-
... ... @@ -1,1 +1,0 @@ 1 -149.4 KB - Content